pentabug/firmware/main.c

#include <inttypes.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stdlib.h>

#include "main.h"

volatile uint8_t sample_pending;


// sample rate is 8M / (5 * 64) = 25000


enum {
	synth_channel_count = 2
};

typedef struct {
	uint16_t phase;
	uint16_t speed;

} synth_channel_t;

typedef struct {
	synth_channel_t channels[synth_channel_count];
	uint16_t output;
} synth_t;

static synth_t synth;

uint8_t counter = 0;
uint8_t pulsewidth = 0;
uint16_t maxcounter = 0xFF;
uint16_t pulsecounter = 0;

static void synth_init(void)
{
	// some test values
	synth.channels[0].phase = 0;
	synth.channels[0].speed = 1153;

	synth.channels[1].phase = 0;
	synth.channels[1].speed = 1728;
}

static inline void synth_mix(void)
{
	synth.output = 0;

	for (int i = 0; i < synth_channel_count; i++) {
		synth_channel_t *chan = &synth.channels[i];
		chan->phase += chan->speed;

		synth.output += (chan->phase >> 8) & 0xff;
	}
}

static void init_sampletimer(void)
{
	// Timer 0
	//
	//set timer0 to CTC & prescaler 64 == 125k
	TCCR0A = (1 << WGM01);
	TCCR0B = (1 << CS00) | (1 << CS01);
	//count up to 5 :
	OCR0A = 3;
	TCNT0=0;
	//enable interrupt
	TIMSK0 |=  (1<<OCIE0A);
}

static inline void init_pwm(void)
{
	//PB2 set to output:
	DDRB |= (1 << PORTB2);
	OCR1B = 0x001F;		//preselect some default
	ICR1 = 0x00FF;		// TOP-wert

	TCCR1A = (1 << COM1B1) | (1 << WGM11);	// only b-chan , fastpwm (mode 14)
	TCCR1B = (1 << WGM13) | (1 << WGM12) | (1 << CS10);	//Fastpwm, no prescale

	//TIMSK1 |=  (1 << OCIE1B); //enable timer 1 Output compare
	return;
}

static void init_leds(void)
{
	//enable LED channels as output
	DDRC |= (1 << PORTC0) | (1 << PORTC2) | (1 << PORTC3) | (1 << PORTC1);
	PORTC = 1;		//one led is on...
	return;
}

inline void setleds(uint8_t state)
{
	//set leds according to
	PORTC |= (state | 0b00001111);
	PORTC &= ~(state | 0b11110000);
	return;
}

static void init_motor(void)
{
	//vibration motor on B1:
	DDRB |= (1 << PORTB1);

}




int main(void)
{

	//hardware initialisation:
	init_leds();
	//init_motor();
	init_pwm();
	init_sampletimer();
	//sample_pending = 0;
	//synth_init();
	//OCR1B = 0x00F0;
	sei();


	while(1){
		//PORTC ^= 0b1;
	}
	while(1);
	while(1) {
		while (0 == sample_pending) ;
		sample_pending = 0;
		synth_mix();
	}

	//never get here
	return 0;
}

/*ISR(TIMER1_COMPB_vect)
{
   OCR1B = 0x00F0;	
} */

//25kHz
ISR(TIMER0_COMPA_vect)
{
	counter++;
	if (counter > maxcounter){
	 	counter = 0;
	};
 	

	pulsecounter++;
	if (pulsecounter > 0x0200){
		 pulsecounter = 0;
		 pulsewidth++;
		 if (pulsewidth > maxcounter){
			pulsewidth = 0;
		}
	}


	
	OCR1B = ((counter > pulsewidth) ? maxcounter : 0x00);
	

	//OCR1B = counter;	
	//OCR1B = OCR1B + 4;
	if (OCR1B > 0x007F) {
	//	OCR1B = 0x00F;
	}	
	PORTC ^= 0b01;

	//ICR1 = synth.output;
	//sample_pending = 1;
	
}