pentabug/firmware/main.c

106 lines
1.7 KiB
C
Raw Normal View History

2012-07-17 01:05:27 +02:00
#include <inttypes.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stdlib.h>
#include "main.h"
2012-08-06 02:52:03 +02:00
#include "synth.h"
#include "usart.h"
2012-07-26 01:34:49 +02:00
static void init_sampletimer(void)
{
/*
* Timer 0
*/
/* set timer0 to CTC & prescaler 64 → 125kHz increment */
TCCR0A = (1 << WGM01);
TCCR0B = (1 << CS00) | (1 << CS01);
2012-08-08 03:24:21 +02:00
OCR0A = 6; /* TOP */
2012-08-06 01:45:37 +02:00
TCNT0 = 0;
/*enable interrupt*/
2012-08-06 00:16:17 +02:00
TIMSK0 |= (1<<OCIE0A);
2012-07-26 01:34:49 +02:00
}
2012-07-18 15:55:20 +02:00
static inline void init_pwm(void)
{
/* set PB2 as output (buzzer pwm port):*/
DDRB |= (1 << PORTB2);
/* analog value preselection :*/
OCR1B = 0x007F;
2012-07-18 16:12:48 +02:00
/* Top value. Timer overflows here. Thus we have a resulting 8bit pwm */
ICR1 = 0x00FF;
/* only b-chan , fastpwm (mode 14), no prescale */
2012-08-08 03:24:21 +02:00
TCCR1A = (1 << COM1B1) | (1 << WGM11);
TCCR1B = (1 << WGM13 ) | (1 << WGM12) | (1 << CS10);
2012-07-18 16:12:48 +02:00
return;
2012-07-18 02:34:15 +02:00
}
2012-07-18 15:55:20 +02:00
static void init_leds(void)
2012-07-17 01:05:27 +02:00
{
/* enable LED channels as output */
DDRC |= (1 << PORTC0) | (1 << PORTC2) |
(1 << PORTC3) | (1 << PORTC1) ;
/* initially one led is on */
PORTC = 1;
2012-07-18 15:55:20 +02:00
return;
}
2012-07-18 02:34:15 +02:00
2012-07-18 15:55:20 +02:00
inline void setleds(uint8_t state)
{
/* set leds according to */
2012-07-26 02:19:59 +02:00
PORTC |= (state | 0b00001111);
PORTC &= ~(state | 0b11110000);
2012-07-18 15:55:20 +02:00
return;
}
2012-07-17 01:05:27 +02:00
2012-07-18 15:55:20 +02:00
static void init_motor(void)
{
/* vibration motor on B1, initially off: */
DDRB |= (1 << PORTB1);
PORTB &= ~( 1<<PORTB1);
2012-07-17 01:05:27 +02:00
2012-07-18 15:55:20 +02:00
}
2012-07-18 02:34:15 +02:00
2012-07-17 01:05:27 +02:00
2012-08-06 00:16:17 +02:00
2012-07-18 15:55:20 +02:00
int main(void)
{
/* hardware initialisation: */
2012-07-18 15:55:20 +02:00
init_leds();
USART0_Init();
2012-08-06 01:45:37 +02:00
// init_motor();
2012-07-18 15:55:20 +02:00
init_pwm();
2012-07-26 02:20:55 +02:00
init_sampletimer();
/* syntesizer initialisation */
2012-08-06 01:45:37 +02:00
synth_init();
/* here the show begins:*/
2012-08-06 01:45:37 +02:00
sei();
2012-08-06 00:16:17 +02:00
2012-08-07 20:08:57 +02:00
for(;;) /* ever */ {
//do something
USART0_put_uint16(0x2342);
USART0_crlf();
};
2012-07-18 15:55:20 +02:00
/* never */ return 0;
2012-07-18 15:55:20 +02:00
}
2012-08-05 22:13:43 +02:00
2012-08-06 00:16:17 +02:00
ISR(TIMER0_COMPA_vect)
2012-08-05 22:13:43 +02:00
{
/* calculate next analog sample value in synth mixer:*/
2012-08-06 01:45:37 +02:00
OCR1B = synth_mix();
2012-08-05 22:13:43 +02:00
}