Lupdate.

--HG--
branch : develop

share/translations/valentina.ts

@@ -829,7 +829,7 @@
     </message>
     <message>
         <source>You have to choose points in a clockwise direction!</source>
-        <translation type="unfinished"></translation>
+        <translation>You have to choose points in a clockwise direction!</translation>
     </message>
 </context>
 <context>
@@ -1501,7 +1501,10 @@ Apply settings anyway?</translation>
 	Three groups: big, middle, small = 0;
 	Two groups: big, small = 1;
 	Descending area = 2</source>
-        <translation type="unfinished"></translation>
+        <translation>
+	Three groups: big, middle, small = 0;
+	Two groups: big, small = 1;
+	Descending area = 2</translation>
     </message>
 </context>
 <context>
@@ -2886,7 +2889,7 @@ Apply settings anyway?</translation>
     </message>
     <message>
         <source>Use for unit testing. Run the program and open a file without showing the main window.</source>
-        <translation type="unfinished"></translation>
+        <translation>Use for unit testing. Run the program and open a file without showing the main window.</translation>
     </message>
 </context>
 <context>
@@ -4738,6 +4741,14 @@ Do you want to save your changes?</translation>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">About Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -5203,59 +5214,59 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>The path to output destination folder. By default the directory at which the application was started.</source>
-        <translation type="unfinished"></translation>
+        <translation>The path to output destination folder. By default the directory at which the application was started.</translation>
     </message>
     <message>
         <source>Page height/width measure units (cannot be used with &quot;%1&quot;, export mode). Valid values: %2.</source>
-        <translation type="unfinished"></translation>
+        <translation>Page height/width measure units (cannot be used with &quot;%1&quot;, export mode). Valid values: %2.</translation>
     </message>
     <message>
         <source>Ignore margins printing (export mode). Disable value keys: &quot;%1&quot;, &quot;%2&quot;, &quot;%3&quot;, &quot;%4&quot;. Set all margins to 0.</source>
-        <translation type="unfinished"></translation>
+        <translation>Ignore margins printing (export mode). Disable value keys: &quot;%1&quot;, &quot;%2&quot;, &quot;%3&quot;, &quot;%4&quot;. Set all margins to 0.</translation>
     </message>
     <message>
         <source>Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key &quot;%1&quot; is used.</source>
-        <translation type="unfinished"></translation>
+        <translation>Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key &quot;%1&quot; is used.</translation>
     </message>
     <message>
         <source>Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key &quot;%1&quot; is used.</source>
-        <translation type="unfinished"></translation>
+        <translation>Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key &quot;%1&quot; is used.</translation>
     </message>
     <message>
         <source>Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key &quot;%1&quot; is used.</source>
-        <translation type="unfinished"></translation>
+        <translation>Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key &quot;%1&quot; is used.</translation>
     </message>
     <message>
         <source>Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key &quot;%1&quot; is used.</source>
-        <translation type="unfinished"></translation>
+        <translation>Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key &quot;%1&quot; is used.</translation>
     </message>
     <message>
         <source>Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree.</source>
-        <translation type="unfinished"></translation>
+        <translation>Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree.</translation>
     </message>
     <message>
         <source>Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images.</source>
-        <translation type="unfinished"></translation>
+        <translation>Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images.</translation>
     </message>
     <message>
         <source>Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used.</source>
-        <translation type="unfinished"></translation>
+        <translation>Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used.</translation>
     </message>
     <message>
         <source>Shift layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout.</source>
-        <translation type="unfinished"></translation>
+        <translation>Shift layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout.</translation>
     </message>
     <message>
         <source>The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet.</source>
-        <translation type="unfinished"></translation>
+        <translation>The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet.</translation>
     </message>
     <message>
         <source>Sets layout groupping cases (export mode): %1.</source>
-        <translation type="unfinished"></translation>
+        <translation>Sets layout groupping cases (export mode): %1.</translation>
     </message>
     <message>
         <source>Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key &apos;%1&apos;.</source>
-        <translation type="unfinished"></translation>
+        <translation>Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key &apos;%1&apos;.</translation>
     </message>
 </context>
 <context>

share/translations/valentina_cs_CZ.ts

@@ -4707,6 +4707,14 @@ Do you want to save your changes?</source>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">O Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>

share/translations/valentina_de_DE.ts

@@ -5,28 +5,28 @@
     <name>AddDet</name>
     <message>
         <source>add detail</source>
-        <translation type="unfinished"></translation>
+        <translation>Detail hinzufügen</translation>
     </message>
 </context>
 <context>
     <name>AddPatternPiece</name>
     <message>
         <source>add pattern piece %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Schnittteil %1 hinzufügen</translation>
     </message>
 </context>
 <context>
     <name>AddToCalc</name>
     <message>
         <source>add object</source>
-        <translation type="unfinished"></translation>
+        <translation>Objekt hinzufügen</translation>
     </message>
 </context>
 <context>
     <name>AddUnionDetails</name>
     <message>
         <source>add union details</source>
-        <translation type="unfinished"></translation>
+        <translation>Verbindungsdetail hinzufügen</translation>
     </message>
 </context>
 <context>
@@ -203,32 +203,32 @@
     </message>
     <message>
         <source>Toolbar</source>
-        <translation type="unfinished"></translation>
+        <translation>Toolbar</translation>
     </message>
     <message>
         <source>The text appears under the icon. (recommended for beginners.)</source>
-        <translation type="unfinished"></translation>
+        <translation>Der Text wird unter dem Symbol angezeigt (empfohlen für Anfänger). </translation>
     </message>
 </context>
 <context>
     <name>DelTool</name>
     <message>
         <source>delete tool</source>
-        <translation type="unfinished"></translation>
+        <translation>Löschwerkzeug</translation>
     </message>
 </context>
 <context>
     <name>DeleteDetail</name>
     <message>
         <source>delete tool</source>
-        <translation type="unfinished"></translation>
+        <translation>Löschwerkzeug</translation>
     </message>
 </context>
 <context>
     <name>DeletePatternPiece</name>
     <message>
         <source>delete pattern piece %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Schnittteil %1 löschen</translation>
     </message>
 </context>
 <context>
@@ -278,11 +278,11 @@
     </message>
     <message>
         <source>This program is part of Valentina project.</source>
-        <translation type="unfinished"></translation>
+        <translation>Dieses Programm ist teil des Valentina Projektes.</translation>
     </message>
     <message>
         <source>Build revision: %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Build revision: %1</translation>
     </message>
     <message>
         <source>Built on %3 at %4</source>
@@ -353,7 +353,7 @@
     </message>
     <message>
         <source>Edit length</source>
-        <translation type="unfinished"></translation>
+        <translation>Länge ändern</translation>
     </message>
 </context>
 <context>
@@ -416,15 +416,15 @@
     </message>
     <message>
         <source>Edit radius</source>
-        <translation type="unfinished"></translation>
+        <translation>Radius bearbeiten</translation>
     </message>
     <message>
         <source>Edit first angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Ersten Winkel bearbeiten</translation>
     </message>
     <message>
         <source>Edit second angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Zweiten Winkel bearbeiten</translation>
     </message>
 </context>
 <context>
@@ -475,15 +475,15 @@
     </message>
     <message>
         <source>Edit radius</source>
-        <translation type="unfinished"></translation>
+        <translation>Radius bearbeiten</translation>
     </message>
     <message>
         <source>Edit the first angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Ersten Winkel bearbeiten </translation>
     </message>
     <message>
         <source>Edit the arc length</source>
-        <translation type="unfinished"></translation>
+        <translation>Bogenlänge bearbeiten</translation>
     </message>
     <message>
         <source>Error</source>
@@ -495,7 +495,7 @@
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation type="unfinished"></translation>
+        <translation>Länge kann nicht gleich 0 sein.</translation>
     </message>
 </context>
 <context>
@@ -566,7 +566,7 @@
     </message>
     <message>
         <source>Edit length</source>
-        <translation type="unfinished"></translation>
+        <translation>Länge ändern</translation>
     </message>
 </context>
 <context>
@@ -621,7 +621,7 @@
     </message>
     <message>
         <source>Edit angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Winkel bearbeiten</translation>
     </message>
 </context>
 <context>
@@ -660,7 +660,7 @@
     </message>
     <message>
         <source>Edit length</source>
-        <translation type="unfinished"></translation>
+        <translation>Länge ändern</translation>
     </message>
 </context>
 <context>
@@ -699,7 +699,7 @@
     </message>
     <message>
         <source>Edit length</source>
-        <translation type="unfinished"></translation>
+        <translation>Länge ändern</translation>
     </message>
 </context>
 <context>
@@ -738,7 +738,7 @@
     </message>
     <message>
         <source>Edit length</source>
-        <translation type="unfinished"></translation>
+        <translation>Länge ändern</translation>
     </message>
 </context>
 <context>
@@ -797,39 +797,39 @@
     </message>
     <message>
         <source>All objects in path should follow in clockwise direction.</source>
-        <translation type="unfinished"></translation>
+        <translation>Alle Objekte im Pfad sollten im Uhrzeigersinn folgen.</translation>
     </message>
     <message>
         <source>Scroll down the list</source>
-        <translation type="unfinished"></translation>
+        <translation>Runterblättern</translation>
     </message>
     <message>
         <source>...</source>
-        <translation type="unfinished"></translation>
+        <translation>...</translation>
     </message>
     <message>
         <source>Scroll up the list</source>
-        <translation type="unfinished"></translation>
+        <translation>Hochblättern</translation>
     </message>
     <message>
         <source>Ready!</source>
-        <translation type="unfinished"></translation>
+        <translation>Fertig!</translation>
     </message>
     <message>
         <source>You need more points!</source>
-        <translation type="unfinished"></translation>
+        <translation>Sie brauchen mehr Punkte!</translation>
     </message>
     <message>
         <source>First point can not equal the last point!</source>
-        <translation type="unfinished"></translation>
+        <translation>Der erste Punkt kann nicht gleich dem letzten Punkt sein!</translation>
     </message>
     <message>
         <source>You have double points!</source>
-        <translation type="unfinished"></translation>
+        <translation>Sie haben doppelte Punkte!</translation>
     </message>
     <message>
         <source>You have to choose points in a clockwise direction!</source>
-        <translation type="unfinished"></translation>
+        <translation>Sie müssen Punkte im Uhrzeigersinn wählen!</translation>
     </message>
 </context>
 <context>
@@ -892,7 +892,11 @@
     </message>
     <message>
         <source>Double click for add to formula</source>
-        <translation type="unfinished"></translation>
+        <translation>Doppelklicken zur Übernahme in Formel</translation>
+    </message>
+    <message>
+        <source>Height</source>
+        <translation type="vanished">Höhe</translation>
     </message>
     <message>
         <source>Size</source>
@@ -912,31 +916,31 @@
     </message>
     <message>
         <source>Line Angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Linienwerkzeug</translation>
     </message>
     <message>
         <source>Radius of arcs</source>
-        <translation type="unfinished"></translation>
+        <translation>Radius des Bogens</translation>
     </message>
     <message>
         <source>Angles of arcs</source>
-        <translation type="unfinished"></translation>
+        <translation>Winkel des Bogens</translation>
     </message>
     <message>
         <source>Angles of curves</source>
-        <translation type="unfinished"></translation>
+        <translation>Winkel der Kurve</translation>
     </message>
     <message>
         <source>Arc radius</source>
-        <translation type="unfinished"></translation>
+        <translation>Bogenradius</translation>
     </message>
     <message>
         <source>Arc angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Bogenwinkel</translation>
     </message>
     <message>
         <source>Curve angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Kurvenwinkel</translation>
     </message>
 </context>
 <context>
@@ -991,11 +995,11 @@
     </message>
     <message>
         <source>Edit angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Winkel bearbeiten</translation>
     </message>
     <message>
         <source>Edit length</source>
-        <translation type="unfinished"></translation>
+        <translation>Länge ändern</translation>
     </message>
 </context>
 <context>
@@ -1137,15 +1141,15 @@
     </message>
     <message>
         <source>Arc with center in point %1 and length %2</source>
-        <translation type="unfinished"></translation>
+        <translation>Bogen mit Zentrum in Punkt % 1 und Länge % 2</translation>
     </message>
     <message>
         <source>%1 - point of arcs intersection</source>
-        <translation type="unfinished"></translation>
+        <translation>% 1 - Schnittpunkt des Bogens</translation>
     </message>
     <message>
         <source>%1 - point of circles intersection</source>
-        <translation type="unfinished"></translation>
+        <translation>% 1 - Schnittpunkt des Kreises</translation>
     </message>
     <message>
         <source>%1 - point from circle and tangent</source>
@@ -1157,7 +1161,7 @@
     </message>
     <message>
         <source>Correction the dart %1_%2_%3</source>
-        <translation type="unfinished"></translation>
+        <translation>Korrektur des Abnähers %1_%2_%3 </translation>
     </message>
 </context>
 <context>
@@ -1256,7 +1260,7 @@
     </message>
     <message>
         <source>Formula:</source>
-        <translation type="unfinished"></translation>
+        <translation>Formel:</translation>
     </message>
     <message>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
@@ -1264,7 +1268,7 @@
     </message>
     <message>
         <source>Description:</source>
-        <translation type="unfinished"></translation>
+        <translation>Beschreibung:</translation>
     </message>
     <message>
         <source>Error</source>
@@ -1272,7 +1276,7 @@
     </message>
     <message>
         <source>Empty field.</source>
-        <translation type="unfinished"></translation>
+        <translation>Leeres Eingabefeld.</translation>
     </message>
     <message>
         <source>Empty field</source>
@@ -1350,7 +1354,7 @@
     </message>
     <message>
         <source>Creation options</source>
-        <translation type="unfinished"></translation>
+        <translation>Optionen erstellen</translation>
     </message>
     <message>
         <source>Shift length:</source>
@@ -1442,15 +1446,15 @@
     </message>
     <message>
         <source>Fields</source>
-        <translation type="unfinished"></translation>
+        <translation>Felder</translation>
     </message>
     <message>
         <source>Left:</source>
-        <translation type="unfinished"></translation>
+        <translation>Links:</translation>
     </message>
     <message>
         <source>Right:</source>
-        <translation type="unfinished"></translation>
+        <translation>Rechts:</translation>
     </message>
     <message>
         <source>Top:</source>
@@ -1624,7 +1628,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Edit angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Winkel bearbeiten</translation>
     </message>
 </context>
 <context>
@@ -1660,12 +1664,12 @@ Apply settings anyway?</source>
     <message>
         <source>Vertical</source>
         <comment>Measurement section</comment>
-        <translation type="unfinished"></translation>
+        <translation>Vertikal</translation>
     </message>
     <message>
         <source>Horizontal</source>
         <comment>Measurement section</comment>
-        <translation type="unfinished"></translation>
+        <translation>Horizontal</translation>
     </message>
     <message>
         <source>Bust</source>
@@ -1680,12 +1684,12 @@ Apply settings anyway?</source>
     <message>
         <source>Arm</source>
         <comment>Measurement section</comment>
-        <translation type="unfinished"></translation>
+        <translation>Arm</translation>
     </message>
     <message>
         <source>Leg</source>
         <comment>Measurement section</comment>
-        <translation type="unfinished"></translation>
+        <translation>Bein</translation>
     </message>
     <message>
         <source>Crotch and Rise</source>
@@ -1695,17 +1699,17 @@ Apply settings anyway?</source>
     <message>
         <source>Hand</source>
         <comment>Measurement section</comment>
-        <translation type="unfinished"></translation>
+        <translation>Hand</translation>
     </message>
     <message>
         <source>Foot</source>
         <comment>Measurement section</comment>
-        <translation type="unfinished"></translation>
+        <translation>Fuss</translation>
     </message>
     <message>
         <source>Head</source>
         <comment>Measurement section</comment>
-        <translation type="unfinished"></translation>
+        <translation>Kopf</translation>
     </message>
     <message>
         <source>Men &amp; Tailoring</source>
@@ -1751,7 +1755,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Unit:</source>
-        <translation type="unfinished"></translation>
+        <translation>Einheit:</translation>
     </message>
     <message>
         <source>Base size:</source>
@@ -1767,7 +1771,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Standard</source>
-        <translation type="unfinished"></translation>
+        <translation>Standard</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -1869,7 +1873,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Edit length</source>
-        <translation type="unfinished"></translation>
+        <translation>Länge ändern</translation>
     </message>
 </context>
 <context>
@@ -2113,7 +2117,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Edit radius</source>
-        <translation type="unfinished"></translation>
+        <translation>Radius verändern</translation>
     </message>
     <message>
         <source>Error</source>
@@ -2168,7 +2172,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Edit radius</source>
-        <translation type="unfinished"></translation>
+        <translation>Radius verändern</translation>
     </message>
 </context>
 <context>
@@ -2300,7 +2304,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>File name:</source>
-        <translation type="unfinished"></translation>
+        <translation>Dateiname:</translation>
     </message>
     <message>
         <source>Path:</source>
@@ -2312,7 +2316,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Browse...</source>
-        <translation type="unfinished"></translation>
+        <translation>Durchsuchen...</translation>
     </message>
     <message>
         <source>TextLabel</source>
@@ -2331,7 +2335,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Example:</source>
-        <translation type="unfinished"></translation>
+        <translation>Beispiel:</translation>
     </message>
     <message>
         <source>Select folder</source>
@@ -2339,31 +2343,31 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Svg files (*.svg)</source>
-        <translation type="unfinished"></translation>
+        <translation>SVG Dateien (*.svg)</translation>
     </message>
     <message>
         <source>PDF files (*.pdf)</source>
-        <translation type="unfinished"></translation>
+        <translation>PDF Dateien (*.pdf)</translation>
     </message>
     <message>
         <source>Images (*.png)</source>
-        <translation type="unfinished"></translation>
+        <translation>Bilder (*.png)</translation>
     </message>
     <message>
         <source>Wavefront OBJ (*.obj)</source>
-        <translation type="unfinished"></translation>
+        <translation>Wavefront OBJ (*.obj)</translation>
     </message>
     <message>
         <source>PS files (*.ps)</source>
-        <translation type="unfinished"></translation>
+        <translation>PS Dateien (*.ps)</translation>
     </message>
     <message>
         <source>EPS files (*.eps)</source>
-        <translation type="unfinished"></translation>
+        <translation>EPS Dateien (*.eps)</translation>
     </message>
     <message>
         <source>DXF files (*.dxf)</source>
-        <translation type="unfinished"></translation>
+        <translation>DXF Dateien (*.dxf)</translation>
     </message>
     <message>
         <source>Tried to use out of range format number.</source>
@@ -2438,7 +2442,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Edit length</source>
-        <translation type="unfinished"></translation>
+        <translation>Länge ändern</translation>
     </message>
 </context>
 <context>
@@ -2625,7 +2629,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Triangle tool</source>
-        <translation type="unfinished"></translation>
+        <translation>Dreieckswerkzeug</translation>
     </message>
     <message>
         <source>First point of the axis</source>
@@ -2758,7 +2762,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select a detail</source>
-        <translation type="unfinished"></translation>
+        <translation>Detail auswählen</translation>
     </message>
     <message>
         <source>Select a point on edge</source>
@@ -3345,7 +3349,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Triangle tool</source>
-        <translation type="unfinished"></translation>
+        <translation>Dreieckswerkzeug</translation>
     </message>
     <message>
         <source>Point at intersection of arc and line</source>
@@ -3757,7 +3761,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Critical error!</source>
-        <translation type="unfinished"></translation>
+        <translation>Kritischer Fehler!</translation>
     </message>
     <message>
         <source>Print to pdf</source>
@@ -3879,7 +3883,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Standard measurements</source>
-        <translation type="unfinished"></translation>
+        <translation>Standardmaße</translation>
     </message>
     <message>
         <source>Layout</source>
@@ -3887,7 +3891,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Templates</source>
-        <translation type="unfinished"></translation>
+        <translation>Vorlagen</translation>
     </message>
 </context>
 <context>
@@ -3953,7 +3957,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Options:</source>
-        <translation type="unfinished"></translation>
+        <translation>Optionen:</translation>
     </message>
     <message>
         <source>Arguments:</source>
@@ -3997,7 +4001,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>px</source>
-        <translation type="unfinished"></translation>
+        <translation>px</translation>
     </message>
     <message>
         <source>add node</source>
@@ -4031,7 +4035,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     <message>
         <source>Internal error</source>
         <comment>Math parser error messages.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Interner Fehler</translation>
     </message>
     <message>
         <source>Invalid function-, variable- or constant name: &quot;$TOK$&quot;.</source>
@@ -4265,7 +4269,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Formula:</source>
-        <translation type="unfinished"></translation>
+        <translation>Formel:</translation>
     </message>
     <message>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
@@ -4285,7 +4289,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Description:</source>
-        <translation type="unfinished"></translation>
+        <translation>Beschreibung:</translation>
     </message>
     <message>
         <source>Move measurement up</source>
@@ -4501,7 +4505,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Empty field.</source>
-        <translation type="unfinished"></translation>
+        <translation>Leeres Eingabefeld.</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
@@ -4509,7 +4513,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Standard measurements</source>
-        <translation type="unfinished"></translation>
+        <translation>Standardmaße</translation>
     </message>
     <message>
         <source>Height: </source>
@@ -4574,7 +4578,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Ctrl+Shift+G</source>
-        <translation type="unfinished"></translation>
+        <translation>Strg+Umschalt+G</translation>
     </message>
     <message>
         <source>Find Next</source>
@@ -4582,7 +4586,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Ctrl+G</source>
-        <translation type="unfinished"></translation>
+        <translation>Strg+G</translation>
     </message>
     <message>
         <source>Individual measurements (*.vit);;Standard measurements (*.vst);;All files (*.*)</source>
@@ -4669,7 +4673,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Gender:</source>
-        <translation type="unfinished"></translation>
+        <translation>Geschlecht:</translation>
     </message>
     <message>
         <source>PM system:</source>
@@ -4703,6 +4707,14 @@ Do you want to save your changes?</source>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">Über Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -4747,11 +4759,11 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Author:</source>
-        <translation type="unfinished"></translation>
+        <translation>Autor:</translation>
     </message>
     <message>
         <source>Book:</source>
-        <translation type="unfinished"></translation>
+        <translation>Buch:</translation>
     </message>
     <message>
         <source>Decimal separator parts</source>
@@ -4794,11 +4806,11 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Standard measurements</source>
-        <translation type="unfinished"></translation>
+        <translation>Standardmaße</translation>
     </message>
     <message>
         <source>Templates</source>
-        <translation type="unfinished"></translation>
+        <translation>Vorlagen</translation>
     </message>
 </context>
 <context>
@@ -4870,31 +4882,31 @@ Do you want to save your changes?</source>
     <name>VAbstractTool</name>
     <message>
         <source>black</source>
-        <translation type="unfinished"></translation>
+        <translation>schwarz</translation>
     </message>
     <message>
         <source>green</source>
-        <translation type="unfinished"></translation>
+        <translation>grün</translation>
     </message>
     <message>
         <source>blue</source>
-        <translation type="unfinished"></translation>
+        <translation>blau</translation>
     </message>
     <message>
         <source>dark red</source>
-        <translation type="unfinished"></translation>
+        <translation>dunkelrot</translation>
     </message>
     <message>
         <source>dark green</source>
-        <translation type="unfinished"></translation>
+        <translation>dunkelgrün</translation>
     </message>
     <message>
         <source>dark blue</source>
-        <translation type="unfinished"></translation>
+        <translation>dunkelblau</translation>
     </message>
     <message>
         <source>yellow</source>
-        <translation type="unfinished"></translation>
+        <translation>gelb</translation>
     </message>
     <message>
         <source>Confirm deletion</source>
@@ -5292,11 +5304,11 @@ Do you want to save your changes?</source>
     <name>VPE::VBoolProperty</name>
     <message>
         <source>True</source>
-        <translation type="unfinished"></translation>
+        <translation>Wahr</translation>
     </message>
     <message>
         <source>False</source>
-        <translation type="unfinished"></translation>
+        <translation>Falsch</translation>
     </message>
 </context>
 <context>
@@ -6170,7 +6182,7 @@ Do you want to save your changes?</source>
     <message>
         <source>European Cut</source>
         <comment>Book name</comment>
-        <translation type="unfinished"></translation>
+        <translation>Europäischer Schnitt</translation>
     </message>
     <message>
         <source>McCunn</source>
@@ -6790,7 +6802,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>WARNING:</source>
-        <translation type="unfinished"></translation>
+        <translation>WARNUNG:</translation>
     </message>
     <message>
         <source>CRITICAL:</source>
@@ -6802,15 +6814,15 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>INFO:</source>
-        <translation type="unfinished"></translation>
+        <translation>INFO:</translation>
     </message>
     <message>
         <source>Warning.</source>
-        <translation type="unfinished"></translation>
+        <translation>Warnung.</translation>
     </message>
     <message>
         <source>Critical error.</source>
-        <translation type="unfinished"></translation>
+        <translation>Kritischer Fehler.</translation>
     </message>
     <message>
         <source>Fatal error.</source>
@@ -6818,7 +6830,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Information.</source>
-        <translation type="unfinished"></translation>
+        <translation>Information.</translation>
     </message>
 </context>
 <context>
@@ -6829,7 +6841,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>WARNING:</source>
-        <translation type="unfinished"></translation>
+        <translation>WARNUNG:</translation>
     </message>
     <message>
         <source>CRITICAL:</source>
@@ -6841,15 +6853,15 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>INFO:</source>
-        <translation type="unfinished"></translation>
+        <translation>INFO:</translation>
     </message>
     <message>
         <source>Warning.</source>
-        <translation type="unfinished"></translation>
+        <translation>Warnung.</translation>
     </message>
     <message>
         <source>Critical error.</source>
-        <translation type="unfinished"></translation>
+        <translation>Kritischer Fehler.</translation>
     </message>
     <message>
         <source>Fatal error.</source>
@@ -6857,7 +6869,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Information.</source>
-        <translation type="unfinished"></translation>
+        <translation>Information.</translation>
     </message>
 </context>
 </TS>

share/translations/valentina_en_CA.ts

@@ -4736,6 +4736,14 @@ Do you want to save your changes?</translation>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">About Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>

share/translations/valentina_en_IN.ts

@@ -4736,6 +4736,14 @@ Do you want to save your changes?</translation>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">About Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>

share/translations/valentina_en_US.ts

@@ -4736,6 +4736,14 @@ Do you want to save your changes?</translation>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">About Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>

share/translations/valentina_es_ES.ts

@@ -5,7 +5,7 @@
     <name>AddDet</name>
     <message>
         <source>add detail</source>
-        <translation type="unfinished"></translation>
+        <translation>añadir detalle</translation>
     </message>
 </context>
 <context>
@@ -19,14 +19,14 @@
     <name>AddToCalc</name>
     <message>
         <source>add object</source>
-        <translation type="unfinished"></translation>
+        <translation>añadir objeto</translation>
     </message>
 </context>
 <context>
     <name>AddUnionDetails</name>
     <message>
         <source>add union details</source>
-        <translation type="unfinished"></translation>
+        <translation>añadir detalles de la unión</translation>
     </message>
 </context>
 <context>
@@ -1315,7 +1315,7 @@
     </message>
     <message>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Finding best position for worpieces. Please, wait.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
-        <translation type="unfinished"></translation>
+        <translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Encontrando la mejor posición para las piezas. Por favor, espera.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
     </message>
     <message>
         <source>Arranged workpieces: %1 from %2</source>
@@ -4707,6 +4707,14 @@ Do you want to save your changes?</source>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">Sobre Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -6789,78 +6797,78 @@ Do you want to save your changes?</source>
     <name>mNoisyHandler</name>
     <message>
         <source>DEBUG:</source>
-        <translation type="unfinished"></translation>
+        <translation>DEPURAR:</translation>
     </message>
     <message>
         <source>WARNING:</source>
-        <translation type="unfinished"></translation>
+        <translation>ADVERTENCIA:</translation>
     </message>
     <message>
         <source>CRITICAL:</source>
-        <translation type="unfinished"></translation>
+        <translation>CRÍTICO:</translation>
     </message>
     <message>
         <source>FATAL:</source>
-        <translation type="unfinished"></translation>
+        <translation>FATAL:</translation>
     </message>
     <message>
         <source>INFO:</source>
-        <translation type="unfinished"></translation>
+        <translation>INFORMACIÓN:</translation>
     </message>
     <message>
         <source>Warning.</source>
-        <translation type="unfinished"></translation>
+        <translation>Advertencia.</translation>
     </message>
     <message>
         <source>Critical error.</source>
-        <translation type="unfinished"></translation>
+        <translation>Error crítico.</translation>
     </message>
     <message>
         <source>Fatal error.</source>
-        <translation type="unfinished"></translation>
+        <translation>Error fatal.</translation>
     </message>
     <message>
         <source>Information.</source>
-        <translation type="unfinished"></translation>
+        <translation>Información.</translation>
     </message>
 </context>
 <context>
     <name>vNoisyHandler</name>
     <message>
         <source>DEBUG:</source>
-        <translation type="unfinished"></translation>
+        <translation>DEPURAR:</translation>
     </message>
     <message>
         <source>WARNING:</source>
-        <translation type="unfinished"></translation>
+        <translation>ADVERTENCIA:</translation>
     </message>
     <message>
         <source>CRITICAL:</source>
-        <translation type="unfinished"></translation>
+        <translation>CRÍTICO:</translation>
     </message>
     <message>
         <source>FATAL:</source>
-        <translation type="unfinished"></translation>
+        <translation>FATAL:</translation>
     </message>
     <message>
         <source>INFO:</source>
-        <translation type="unfinished"></translation>
+        <translation>INFORMACIÓN:</translation>
     </message>
     <message>
         <source>Warning.</source>
-        <translation type="unfinished"></translation>
+        <translation>Advertencia.</translation>
     </message>
     <message>
         <source>Critical error.</source>
-        <translation type="unfinished"></translation>
+        <translation>Error crítico.</translation>
     </message>
     <message>
         <source>Fatal error.</source>
-        <translation type="unfinished"></translation>
+        <translation>Error fatal.</translation>
     </message>
     <message>
         <source>Information.</source>
-        <translation type="unfinished"></translation>
+        <translation>Información.</translation>
     </message>
 </context>
 </TS>

share/translations/valentina_fi_FI.ts

@@ -4707,6 +4707,14 @@ Do you want to save your changes?</source>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">Tietoja Qt:stä</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>

share/translations/valentina_fr_FR.ts

@@ -797,35 +797,35 @@
     </message>
     <message>
         <source>All objects in path should follow in clockwise direction.</source>
-        <translation type="unfinished"></translation>
+        <translation>Tous les objets du chemin doivent se suivre dans le sens des aiguilles d&apos;une montre</translation>
     </message>
     <message>
         <source>Scroll down the list</source>
-        <translation type="unfinished"></translation>
+        <translation>Faire défiler la liste</translation>
     </message>
     <message>
         <source>...</source>
-        <translation type="unfinished"></translation>
+        <translation>...</translation>
     </message>
     <message>
         <source>Scroll up the list</source>
-        <translation type="unfinished"></translation>
+        <translation>Faire défiler la liste</translation>
     </message>
     <message>
         <source>Ready!</source>
-        <translation type="unfinished"></translation>
+        <translation>Prêt!</translation>
     </message>
     <message>
         <source>You need more points!</source>
-        <translation type="unfinished"></translation>
+        <translation>Vous avez besoin de plus de points!</translation>
     </message>
     <message>
         <source>First point can not equal the last point!</source>
-        <translation type="unfinished"></translation>
+        <translation>Le premier point ne peut être identique au premier!</translation>
     </message>
     <message>
         <source>You have double points!</source>
-        <translation type="unfinished"></translation>
+        <translation>Vous avez des points en double!</translation>
     </message>
     <message>
         <source>You have to choose points in a clockwise direction!</source>
@@ -1216,7 +1216,7 @@
     </message>
     <message>
         <source>Angles curves</source>
-        <translation type="unfinished"></translation>
+        <translation>Angles des courbes</translation>
     </message>
     <message>
         <source>Lengths arcs</source>
@@ -1232,7 +1232,7 @@
     </message>
     <message>
         <source>Angles arcs</source>
-        <translation type="unfinished"></translation>
+        <translation>Angles des arcs</translation>
     </message>
     <message>
         <source>Formula</source>
@@ -1292,11 +1292,11 @@
     </message>
     <message>
         <source>Increment_%1</source>
-        <translation type="unfinished"></translation>
+        <translation>Increment_%1</translation>
     </message>
     <message>
         <source>Edit increment</source>
-        <translation type="unfinished"></translation>
+        <translation>Editer l&apos;incrément</translation>
     </message>
 </context>
 <context>
@@ -1406,7 +1406,7 @@
     </message>
     <message>
         <source>Gap width:</source>
-        <translation type="unfinished"></translation>
+        <translation>Ecartement :</translation>
     </message>
     <message>
         <source>Save length of the sheet</source>
@@ -1451,31 +1451,31 @@
     </message>
     <message>
         <source>Paper format</source>
-        <translation type="unfinished"></translation>
+        <translation>Format du papier</translation>
     </message>
     <message>
         <source>Fields</source>
-        <translation type="unfinished"></translation>
+        <translation>Champs</translation>
     </message>
     <message>
         <source>Left:</source>
-        <translation type="unfinished"></translation>
+        <translation>Gauche:</translation>
     </message>
     <message>
         <source>Right:</source>
-        <translation type="unfinished"></translation>
+        <translation>Droite:</translation>
     </message>
     <message>
         <source>Top:</source>
-        <translation type="unfinished"></translation>
+        <translation>Haut:</translation>
     </message>
     <message>
         <source>Bottom:</source>
-        <translation type="unfinished"></translation>
+        <translation>Bas:</translation>
     </message>
     <message>
         <source>Ignore fileds</source>
-        <translation type="unfinished"></translation>
+        <translation>Ignorer les champs</translation>
     </message>
     <message>
         <source>Custom</source>
@@ -1483,13 +1483,15 @@
     </message>
     <message>
         <source>Wrong fields.</source>
-        <translation type="unfinished"></translation>
+        <translation>Mauvais champs.</translation>
     </message>
     <message>
         <source>Fields go beyond printing. 
 
 Apply settings anyway?</source>
-        <translation type="unfinished"></translation>
+        <translation>Les champs dépassent l&apos;impression.
+
+Appliquer les réglages quand-même ?</translation>
     </message>
     <message>
         <source>
@@ -1723,7 +1725,7 @@ Apply settings anyway?</source>
     <message>
         <source>Men &amp; Tailoring</source>
         <comment>Measurement section</comment>
-        <translation type="unfinished"></translation>
+        <translation>Hommes &amp; Tailleurs</translation>
     </message>
     <message>
         <source>Historical &amp; Specialty</source>
@@ -1737,19 +1739,19 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Collapse All</source>
-        <translation type="unfinished"></translation>
+        <translation>Tout replier</translation>
     </message>
     <message>
         <source>Expand All</source>
-        <translation type="unfinished"></translation>
+        <translation>Tout déplier</translation>
     </message>
     <message>
         <source>Check all</source>
-        <translation type="unfinished"></translation>
+        <translation>Tout cocher</translation>
     </message>
     <message>
         <source>Uncheck all</source>
-        <translation type="unfinished"></translation>
+        <translation>Tout décocher</translation>
     </message>
 </context>
 <context>
@@ -2817,7 +2819,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Exception thrown: %1. Program will be terminated.</source>
-        <translation type="unfinished"></translation>
+        <translation>Erreur d&apos;exception : %1. Fin du programme.</translation>
     </message>
     <message>
         <source>Valentina&apos;s measurements editor.</source>
@@ -2857,7 +2859,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Please, provide one input file.</source>
-        <translation type="unfinished"></translation>
+        <translation>Merci de choisir un fichier.</translation>
     </message>
     <message>
         <source>Open with the base size. Valid values: %1cm.</source>
@@ -3491,7 +3493,7 @@ Voulez-vous sauvegarder les changements ? </translation>
     </message>
     <message>
         <source>Save as tiled PDF</source>
-        <translation type="unfinished"></translation>
+        <translation>Enregistrer en tant que PDF</translation>
     </message>
     <message>
         <source>Split and save a layout into smaller pages</source>
@@ -3515,7 +3517,7 @@ Voulez-vous sauvegarder les changements ? </translation>
     </message>
     <message>
         <source>Print preview original layout</source>
-        <translation type="unfinished"></translation>
+        <translation>Enregistrer la mise en page originale</translation>
     </message>
     <message>
         <source>Export As...</source>
@@ -3527,11 +3529,11 @@ Voulez-vous sauvegarder les changements ? </translation>
     </message>
     <message>
         <source>Select first an arc</source>
-        <translation type="unfinished"></translation>
+        <translation>Choisissez d&apos;abord un arc </translation>
     </message>
     <message>
         <source>Select first circle center </source>
-        <translation type="unfinished"></translation>
+        <translation>Chosissez d&apos;abord le centre du cercle</translation>
     </message>
     <message>
         <source>Select point on tangent </source>
@@ -3539,7 +3541,7 @@ Voulez-vous sauvegarder les changements ? </translation>
     </message>
     <message>
         <source>Select point of the center of the arc</source>
-        <translation type="unfinished"></translation>
+        <translation>Choisissez d&apos;abord le centre de l&apos;arc</translation>
     </message>
     <message>
         <source>Select the first base line point</source>
@@ -3704,7 +3706,7 @@ Voulez-vous sauvegarder les changements ? </translation>
     </message>
     <message>
         <source>Please, provide one input file.</source>
-        <translation type="unfinished"></translation>
+        <translation>Merci de choisir un fichier.</translation>
     </message>
     <message>
         <source>Print an original layout</source>
@@ -3775,7 +3777,7 @@ Voulez-vous sauvegarder les changements ? </translation>
     </message>
     <message>
         <source>Print to pdf</source>
-        <translation type="unfinished"></translation>
+        <translation>Imprimer en PDF</translation>
     </message>
     <message>
         <source>PDF file (*.pdf)</source>
@@ -3811,7 +3813,7 @@ Voulez-vous sauvegarder les changements ? </translation>
     </message>
     <message>
         <source>Can&apos;t open printer %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Impossible d&apos;utiiser l&apos;imprimante %1</translation>
     </message>
     <message>
         <source>Export error.</source>
@@ -3963,7 +3965,7 @@ Voulez-vous sauvegarder les changements ? </translation>
     </message>
     <message>
         <source>Usage: %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Utilisation : %1</translation>
     </message>
     <message>
         <source>Options:</source>
@@ -4625,7 +4627,7 @@ Voulez-vous enregistrer les changements?</translation>
     </message>
     <message>
         <source>File has unknown format.</source>
-        <translation type="unfinished"></translation>
+        <translation>Format de fichier inconnu.</translation>
     </message>
     <message>
         <source>Full name</source>
@@ -4718,6 +4720,14 @@ Voulez-vous enregistrer les changements?</translation>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Mesure inconnue&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">À propos de Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -4952,7 +4962,7 @@ Voulez-vous enregistrer les changements?</translation>
     </message>
     <message>
         <source>Exception thrown: %1. Program will be terminated.</source>
-        <translation type="unfinished"></translation>
+        <translation>Erreur : %1. Fin du programme.</translation>
     </message>
 </context>
 <context>
@@ -5057,6 +5067,10 @@ Voulez-vous enregistrer les changements?</translation>
         <source>The base filename of layout files</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>The path to output destination folder.</source>
+        <translation type="vanished">Le dossier de destination</translation>
+    </message>
     <message>
         <source>The destination folder</source>
         <translation>Le dossier de destination</translation>
@@ -5067,7 +5081,7 @@ Voulez-vous enregistrer les changements?</translation>
     </message>
     <message>
         <source>The size value</source>
-        <translation type="unfinished"></translation>
+        <translation>Valeur de taille de base</translation>
     </message>
     <message>
         <source>Set height value a pattern file, that was opened with standard measurements (export mode). Valid values: %1cm.</source>
@@ -5075,7 +5089,7 @@ Voulez-vous enregistrer les changements?</translation>
     </message>
     <message>
         <source>The height value</source>
-        <translation type="unfinished"></translation>
+        <translation>Valeur de hauteur de base</translation>
     </message>
     <message>
         <source>Page width in current units like 12.0 (cannot be used with &quot;%1&quot;, export mode).</source>

share/translations/valentina_he_IL.ts

@@ -4822,6 +4822,14 @@ Do you want to save your changes?</source>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TableWindow</name>

share/translations/valentina_id_ID.ts

@@ -5244,6 +5244,14 @@ Do you want to save your changes?</source>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TableWindow</name>

share/translations/valentina_it_IT.ts

@@ -4738,6 +4738,14 @@ Vuoi salvare le tue modifiche?</translation>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Misura sconosciuta&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">About Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>

share/translations/valentina_nl_NL.ts

@@ -4735,6 +4735,14 @@ Wil je deze veranderingen opslaan?</translation>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">Over Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>

share/translations/valentina_ro_RO.ts

@@ -4706,6 +4706,14 @@ Do you want to save your changes?</source>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">Despre Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>

share/translations/valentina_ru_RU.ts

@@ -4736,6 +4736,14 @@ Do you want to save your changes?</source>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Неизвестная мерка&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">Про Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>

share/translations/valentina_uk_UA.ts

@@ -4706,6 +4706,14 @@ Do you want to save your changes?</source>
         <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:340pt;&quot;&gt;?&lt;/span&gt;&lt;/p&gt;&lt;p align=&quot;center&quot;&gt;Unknown measurement&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>About Qt</source>
+        <translation type="unfinished">Про Qt</translation>
+    </message>
+    <message>
+        <source>File was not saved yet.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>