Lupdate.

--HG--
branch : develop

share/translations/measurements_p14_fr_FR.ts

@@ -1460,49 +1460,49 @@ A partir du point de Sur-Poitrine sur le Côté à l'autre Côté du point
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="853"/>
         <source>Neck arc, back, half</source>
         <comment>Full measurement name.</comment>
-        <translation>Moitié de demi-encolure, dos.</translation>
+        <translation>Encolure, demi, dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="854"/>
         <source>Half of &apos;Neck arc, back&apos;. (&apos;Neck arc, back&apos; / 2).</source>
         <comment>Full measurement description.</comment>
-        <translation>Moitié de &apos;demi-ecolure, dos&apos;. (&apos;Demi-encolure, dos&apos; / 2).</translation>
+        <translation>Moitié de &apos;Encolure, dos&apos;. (&apos;Encolure, dos&apos; / 2).</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="858"/>
         <source>highbust_arc_half_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation>quart_tour_surpoitrinaire_dos</translation>
+        <translation>demi_tour_surpoitrinaire_dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="860"/>
         <source>Highbust arc, back, half</source>
         <comment>Full measurement name.</comment>
-        <translation>Moitié d&apos;arc sur-poitrinaire, dos</translation>
+        <translation>Moitié d&apos;arc Sur-poitrinaire, dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="861"/>
         <source>Half of &apos;Highbust arc, back&apos;. From Highbust Back to Highbust Side. (&apos;Highbust arc, back&apos; / 2).</source>
         <comment>Full measurement description.</comment>
-        <translation>Moitié del&apos;arc sur-poitrinaire dos. Du point de sur-poitrine devant à point de sur-poitrine latéral (&apos;</translation>
+        <translation>Moitié de &apos;arc Sur-poitrinaire, dos&apos;. Partir du tour Sur-Poitrinaire Dos jusqu&apos;au point Sur-Poitrinaire côté. (&apos;Arc Sur-poitrinaire, dos&apos; / 2).</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="866"/>
         <source>bust_arc_half_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation>quart_tour_poitrine_dos</translation>
+        <translation>demi_tour_poitrine_dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="868"/>
         <source>Bust arc, back, half</source>
         <comment>Full measurement name.</comment>
-        <translation>Demi-arc de poitrine, dos</translation>
+        <translation>Demi-tour de Poitrine, dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="869"/>
         <source>Half of &apos;Bust arc, back&apos;. (&apos;Bust arc, back&apos; / 2).</source>
         <comment>Full measurement description.</comment>
-        <translation>Moitié d&apos;&apos;arc de poitrine, dos.&apos; (&apos;Arc de poitrine, devant&apos; / 2).</translation>
+        <translation>Moitié du &apos;tour de Poitrine, dos.&apos; (tour de Poitrine, dos&apos; / 2).</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="873"/>
@@ -1514,85 +1514,85 @@ A partir du point de Sur-Poitrine sur le Côté à l&apos;autre Côté du point
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="875"/>
         <source>Lowbust arc, back, half</source>
         <comment>Full measurement name.</comment>
-        <translation>Demi-arc sous-mammaire, dos</translation>
+        <translation>Demi-arc Sous-mammaire, dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="876"/>
         <source>Half of &apos;Lowbust Arc, back&apos;. (&apos;Lowbust arc, back&apos; / 2).</source>
         <comment>Full measurement description.</comment>
-        <translation>Moitié de &apos;Arc sous-mammaire, dos&apos; (&apos;Arc sous-mammaire, dos&apos; / 2).</translation>
+        <translation>Moitié de &apos;Arc Sous-mammaire, dos&apos; (&apos;Arc Sous-mammaire, dos&apos; / 2).</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="880"/>
         <source>rib_arc_half_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation>quart_tour_thorax_dos</translation>
+        <translation>demi_tour_thorax_dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="882"/>
         <source>Rib arc, back, half</source>
         <comment>Full measurement name.</comment>
-        <translation>Demi-arc thoracique, dos</translation>
+        <translation>Demi-arc Thoracique, dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="883"/>
         <source>Half of &apos;Rib arc, back&apos;. (&apos;Rib arc, back&apos; / 2).</source>
         <comment>Full measurement description.</comment>
-        <translation>Moitié de &apos;Arc thoracique, dos&apos;. (&apos;Arc thoracique, dos&apos; / 2).</translation>
+        <translation>Moitié de &apos;Arc Thoracique, dos&apos;. (&apos;Arc Thoracique, dos&apos; / 2).</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="887"/>
         <source>waist_arc_half_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation>quart_tour_taille_dos</translation>
+        <translation>demi_tour_taille_dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="889"/>
         <source>Waist arc, back, half</source>
         <comment>Full measurement name.</comment>
-        <translation>Moitié du demi-tour de taille, dos.</translation>
+        <translation>Moitié du tour de Taille, dos.</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="890"/>
         <source>Half of &apos;Waist arc, back&apos;. (&apos;Waist  arc, back&apos; / 2).</source>
         <comment>Full measurement description.</comment>
-        <translation>Moitié de d&quot;emi-tour de taille, dos&quot;. (&apos;demi-tour de taille, dos.&apos; / 2).</translation>
+        <translation>Moitié de &apos;tour de Taille, dos&quot;. (&apos;demi-tour de Taille, dos.&apos; / 2).</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="894"/>
         <source>highhip_arc_half_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation>quart_tour_bassin_dos</translation>
+        <translation>demi_tour_bassin_dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="896"/>
         <source>Highhip arc, back, half</source>
         <comment>Full measurement name.</comment>
-        <translation>Moitié de demi-tour de bassin, dos</translation>
+        <translation>Moitié du tour de Bassin, dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="897"/>
         <source>Half of &apos;Highhip arc, back&apos;. From Highhip Back to Highbust Side. (&apos;Highhip arc, back&apos;/ 2).</source>
         <comment>Full measurement description.</comment>
-        <translation>Moitié de &apos;demi-tour de bassin, dos&apos;. (&apos;Moitié de demi-tour de bassin, dos&apos; / 2).</translation>
+        <translation>Moitié de &apos;tour de Bassin, dos&apos;. (&apos;Tour de bassin, dos&apos; / 2).</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="902"/>
         <source>hip_arc_half_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation>quart_tour_hanches_dos</translation>
+        <translation>demi_tour_hanches_dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="904"/>
         <source>Hip arc, back, half</source>
         <comment>Full measurement name.</comment>
-        <translation>Moitié du demi-tour de hanche, dos</translation>
+        <translation>Moitié du tour de Hanche, dos</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="905"/>
         <source>Half of &apos;Hip arc, back&apos;. (&apos;Hip arc, back&apos; / 2).</source>
         <comment>Full measurement description.</comment>
-        <translation>Moitié du &apos;demi-tour de hanches, dos&apos;. (&apos;Demi-tour de hanches, dos&apos; / 2).</translation>
+        <translation>Moitié du &apos;Tour de Hanches, dos&apos;. (&apos;Tour de Hanches, dos&apos; / 2).</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="909"/>

share/translations/valentina.ts

@@ -4510,6 +4510,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5136,6 +5140,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished">Paths</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5728,6 +5739,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8427,7 +8442,7 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished">The Default unit has been updated and will be used as the default for the next pattern you create.</translation>
+        <translation type="obsolete">The Default unit has been updated and will be used as the default for the next pattern you create.</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -8449,6 +8464,10 @@ Do you want to save your changes?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8643,6 +8662,23 @@ Do you want to save your changes?</translation>
         <source>Inches</source>
         <translation type="unfinished">Inches</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_cs_CZ.ts

@@ -4431,6 +4431,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5001,6 +5005,14 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation>Cesty</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5425,6 +5437,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -7903,7 +7919,7 @@ Chcete uložit své změny?</translation>
     </message>
     <message>
         <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation>Výchozí jednotka byla aktualizována a bude jako výchozí použita pro příští vámi vytvořený vzor.</translation>
+        <translation type="vanished">Výchozí jednotka byla aktualizována a bude jako výchozí použita pro příští vámi vytvořený vzor.</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -7925,6 +7941,10 @@ Chcete uložit své změny?</translation>
         <source>Free curve mode</source>
         <translation>Režim volné křivky</translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8099,6 +8119,23 @@ Chcete uložit své změny?</translation>
         <source>Inches</source>
         <translation>Palce</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>

share/translations/valentina_de_DE.ts

@@ -4485,6 +4485,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5107,6 +5111,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished">Verzeichnisse</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5539,6 +5550,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8208,10 +8223,6 @@ Sollen die Änderungen gespeichert werden?</translation>
         <source>With OS options</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished">Die Standardmaßeinheit wurde geändert und wird als Standard für neu angelegte Schnittmuster wirksam.</translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished">Zentimeter</translation>
@@ -8232,6 +8243,10 @@ Sollen die Änderungen gespeichert werden?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8406,6 +8421,23 @@ Sollen die Änderungen gespeichert werden?</translation>
         <source>Inches</source>
         <translation>Zoll</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_el_GR.ts

@@ -4415,6 +4415,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5037,6 +5041,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation>Μονοπάτια</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5473,6 +5484,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8090,10 +8105,6 @@ Do you want to save your changes?</source>
         <source>With OS options</source>
         <translation>Με επιλογές του λειτουργικού συστήματος</translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished">Οι προεπιλεγμένες μονάδες έχουν ενημερωθεί και θα χρησιμοποιηθούν ως προεπιλογή για το επόμενο πατρόν που θα δημιουργήσετε.</translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation>Εκατοστά</translation>
@@ -8114,6 +8125,10 @@ Do you want to save your changes?</source>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8288,6 +8303,23 @@ Do you want to save your changes?</source>
         <source>Inches</source>
         <translation>Ίντσες</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>

share/translations/valentina_en_CA.ts

@@ -4498,6 +4498,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5120,6 +5124,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation>Paths</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5560,6 +5571,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8247,7 +8262,7 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation>The Default unit has been updated and will be used as the default for the next pattern you create.</translation>
+        <translation type="vanished">The Default unit has been updated and will be used as the default for the next pattern you create.</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -8269,6 +8284,10 @@ Do you want to save your changes?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8443,6 +8462,23 @@ Do you want to save your changes?</translation>
         <source>Inches</source>
         <translation>Inches</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_en_IN.ts

@@ -4498,6 +4498,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5120,6 +5124,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation>Paths</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5560,6 +5571,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8247,7 +8262,7 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation>The Default unit has been updated and will be used as the default for the next pattern you create.</translation>
+        <translation type="vanished">The Default unit has been updated and will be used as the default for the next pattern you create.</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -8269,6 +8284,10 @@ Do you want to save your changes?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8443,6 +8462,23 @@ Do you want to save your changes?</translation>
         <source>Inches</source>
         <translation>Inches</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_en_US.ts

@@ -4498,6 +4498,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5120,6 +5124,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation>Paths</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5560,6 +5571,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8247,7 +8262,7 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation>The Default unit has been updated and will be used as the default for the next pattern you create.</translation>
+        <translation type="vanished">The Default unit has been updated and will be used as the default for the next pattern you create.</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -8269,6 +8284,10 @@ Do you want to save your changes?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8443,6 +8462,23 @@ Do you want to save your changes?</translation>
         <source>Inches</source>
         <translation>Inches</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_es_ES.ts

@@ -4498,6 +4498,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5120,6 +5124,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished"></translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5560,6 +5571,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8245,10 +8260,6 @@ Quiere guardar los cambios?</translation>
         <source>With OS options</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished">La unidad por defecto fue actualizada y va a usarse como valor por defecto para el próximo patrón que cree.</translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished">Centímetros</translation>
@@ -8269,6 +8280,10 @@ Quiere guardar los cambios?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8443,6 +8458,23 @@ Quiere guardar los cambios?</translation>
         <source>Inches</source>
         <translation>Pulgadas</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_fi_FI.ts

@@ -3951,6 +3951,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -4513,6 +4517,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished">Polut</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -4917,6 +4928,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -7313,10 +7328,6 @@ Haluatko tallentaa muutokset?</translation>
         <source>With OS options</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished"></translation>
@@ -7337,6 +7348,10 @@ Haluatko tallentaa muutokset?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -7511,6 +7526,23 @@ Haluatko tallentaa muutokset?</translation>
         <source>Inches</source>
         <translation>Tuumaa</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCoreApplication</name>

share/translations/valentina_fr_FR.ts

@@ -4495,6 +4495,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5117,6 +5121,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished">Chemins</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5557,6 +5568,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8230,10 +8245,6 @@ Voulez-vous sauvegarder les changements?</translation>
         <source>With OS options</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished">L&apos;unité par Défaut a été mise à jour et sera utilisée par défaut pour le prochain patron créé.</translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished">Centimètres</translation>
@@ -8254,6 +8265,10 @@ Voulez-vous sauvegarder les changements?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8428,6 +8443,23 @@ Voulez-vous sauvegarder les changements?</translation>
         <source>Inches</source>
         <translation>Pouces</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_he_IL.ts

@@ -3313,6 +3313,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -3827,6 +3831,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished"></translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -4207,6 +4218,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -6332,10 +6347,6 @@ Do you want to save your changes?</source>
         <source>With OS options</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished">סנטימטרים</translation>
@@ -6356,6 +6367,10 @@ Do you want to save your changes?</source>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -6530,6 +6545,23 @@ Do you want to save your changes?</source>
         <source>Inches</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCoreApplication</name>

share/translations/valentina_id_ID.ts

@@ -3616,6 +3616,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -4154,6 +4158,12 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished"></translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -4534,6 +4544,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -6680,10 +6694,6 @@ Apakah anda ingin menyimpan perubahan anda?</translation>
         <source>With OS options</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished">Centimeter</translation>
@@ -6704,6 +6714,10 @@ Apakah anda ingin menyimpan perubahan anda?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -6878,6 +6892,23 @@ Apakah anda ingin menyimpan perubahan anda?</translation>
         <source>Inches</source>
         <translation>Inchi</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCoreApplication</name>

share/translations/valentina_it_IT.ts

@@ -4402,6 +4402,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5024,6 +5028,13 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished">Path</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5456,6 +5467,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8117,10 +8132,6 @@ Vuoi salvare i cambiamenti?</translation>
         <source>With OS options</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished">L&apos;unità di default è stata aggiornata e verrà utilizzata come impostazione predefinita nella creazione del prossimo modello.</translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished">Centimetri</translation>
@@ -8141,6 +8152,10 @@ Vuoi salvare i cambiamenti?</translation>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8315,6 +8330,23 @@ Vuoi salvare i cambiamenti?</translation>
         <source>Inches</source>
         <translation>Pollici</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_nl_NL.ts

@@ -4500,6 +4500,10 @@ Toch de instellingen aanpassen?</translation>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5122,6 +5126,13 @@ Toch de instellingen aanpassen?</translation>
         <source>Paths</source>
         <translation>Paden</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5562,6 +5573,10 @@ Toch de instellingen aanpassen?</translation>
         <source>Place label</source>
         <translation>Plaats label</translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8248,7 +8263,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation>De standaardwaarde van de eenheid is opgewaardeerd en zal worden gebruikt  als de standaardbasis voor uw volgende patrooncreatie.</translation>
+        <translation type="vanished">De standaardwaarde van de eenheid is opgewaardeerd en zal worden gebruikt  als de standaardbasis voor uw volgende patrooncreatie.</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -8270,6 +8285,10 @@ Do you want to save your changes?</source>
         <source>Free curve mode</source>
         <translation>Laat krommings mode los</translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8444,6 +8463,23 @@ Do you want to save your changes?</source>
         <source>Inches</source>
         <translation>Inches</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_pl_PL.ts

@@ -3873,6 +3873,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -4419,6 +4423,14 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished">Ścieżki</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -4815,6 +4827,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -7126,10 +7142,6 @@ Do you want to save your changes?</source>
         <source>With OS options</source>
         <translation>Z opcjami systemu operacyjnego</translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished">Domyślna jednostka miary została zaktualizowana i będzie użyta podczas tworzenia następnego wykroju. </translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished">Centymetry</translation>
@@ -7150,6 +7162,10 @@ Do you want to save your changes?</source>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -7324,6 +7340,23 @@ Do you want to save your changes?</source>
         <source>Inches</source>
         <translation>Cale</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>

share/translations/valentina_pt_BR.ts

@@ -4500,6 +4500,10 @@ Aplicar configurações de qualquer forma?</translation>
         <source>Intersection 2 (only right)</source>
         <translation>Interseção 2 (apenas à direita)</translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5122,6 +5126,13 @@ Aplicar configurações de qualquer forma?</translation>
         <source>Paths</source>
         <translation>Caminhos</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5558,6 +5569,10 @@ Aplicar configurações de qualquer forma?</translation>
         <source>Place label</source>
         <translation>Colocar rótulo</translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8225,7 +8240,7 @@ Você quer salvar suas mudanças?</translation>
     </message>
     <message>
         <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation>A unidade padrão foi atualizada e será usada como padrão para o próximo molde criado.</translation>
+        <translation type="vanished">A unidade padrão foi atualizada e será usada como padrão para o próximo molde criado.</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -8247,6 +8262,10 @@ Você quer salvar suas mudanças?</translation>
         <source>Free curve mode</source>
         <translation>Modo de curva livre</translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8407,7 +8426,7 @@ Você quer salvar suas mudanças?</translation>
     </message>
     <message>
         <source>Bold line width</source>
-        <translation type="unfinished"></translation>
+        <translation>Largura de linha em negrito</translation>
     </message>
     <message>
         <source>Line width:</source>
@@ -8421,6 +8440,23 @@ Você quer salvar suas mudanças?</translation>
         <source>Inches</source>
         <translation>Polegadas</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>

share/translations/valentina_ro_RO.ts

@@ -4036,6 +4036,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -4586,6 +4590,14 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished">Căi</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -4966,6 +4978,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -7282,10 +7298,6 @@ Do you want to save your changes?</source>
         <source>With OS options</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished">Unitatea standard a fost actualizată și va fi utilizată ca standard pentru modelele viitoare pe care le creați.</translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished">Centimetrii</translation>
@@ -7306,6 +7318,10 @@ Do you want to save your changes?</source>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -7480,6 +7496,23 @@ Do you want to save your changes?</source>
         <source>Inches</source>
         <translation>Inci</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCoreApplication</name>

share/translations/valentina_ru_RU.ts

@@ -4500,6 +4500,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation>Пересечение 2 (только справа)</translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5122,6 +5126,14 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation>Контуры</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5562,6 +5574,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation>Метка места</translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8249,7 +8265,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation>Единицы измерения обновлены и будут применены при следующем создании выкройки.</translation>
+        <translation type="vanished">Единицы измерения обновлены и будут применены при следующем создании выкройки.</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -8271,6 +8287,10 @@ Do you want to save your changes?</source>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8445,6 +8465,23 @@ Do you want to save your changes?</source>
         <source>Inches</source>
         <translation>Дюймы</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_uk_UA.ts

@@ -4498,6 +4498,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5120,6 +5124,14 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation>Шляхи</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -5560,6 +5572,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -8246,7 +8262,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation>Одиниці вимірювання по замовчуванню були оновлені і будуть використанні як основні наступного разу при створенні нової викрійки.</translation>
+        <translation type="vanished">Одиниці вимірювання по замовчуванню були оновлені і будуть використанні як основні наступного разу при створенні нової викрійки.</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -8268,6 +8284,10 @@ Do you want to save your changes?</source>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -8442,6 +8462,23 @@ Do you want to save your changes?</source>
         <source>Inches</source>
         <translation>Дюйми</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>

share/translations/valentina_zh_CN.ts

@@ -3415,6 +3415,10 @@ Apply settings anyway?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -3893,6 +3897,12 @@ Apply settings anyway?</source>
         <source>Paths</source>
         <translation type="unfinished">路径</translation>
     </message>
+    <message numerus="yes">
+        <source>Followed %n option(s) require restart to take effect: %1.</source>
+        <translation type="unfinished">
+            <numerusform></numerusform>
+        </translation>
+    </message>
 </context>
 <context>
     <name>DialogRotation</name>
@@ -4285,6 +4295,10 @@ Apply settings anyway?</source>
         <source>Place label</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Check uniqueness</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -6424,10 +6438,6 @@ Do you want to save your changes?</source>
         <source>With OS options</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>The Default unit has been updated and will be used as the default for the next pattern you create.</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Centimeters</source>
         <translation type="unfinished">公分</translation>
@@ -6448,6 +6458,10 @@ Do you want to save your changes?</source>
         <source>Free curve mode</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>default unit</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>PreferencesPathPage</name>
@@ -6622,6 +6636,23 @@ Do you want to save your changes?</source>
         <source>Inches</source>
         <translation>英寸</translation>
     </message>
+    <message>
+        <source>Use OpenGL to render a scene.
+This option will take an affect after restart.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use OpenGL render</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>antialiasing</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>scene render</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCoreApplication</name>