Lupdate.

--HG--
branch : develop

share/translations/valentina.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Tool cubic bezier</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation>Tool cubic bezier path</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1798,6 +1814,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -5124,6 +5144,10 @@ Apply settings anyway?</translation>
         <source>Calculation</source>
         <translation>Calculation</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5255,6 +5279,10 @@ Apply settings anyway?</translation>
         <source>Calculation</source>
         <translation>Calculation</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -7451,6 +7479,14 @@ Do you want to save your changes?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished">By default forbid flipping for all new created workpieces</translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8818,6 +8854,14 @@ Do you want to save your changes?</translation>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPins</name>
@@ -10694,6 +10738,10 @@ Do you want to save your changes?</translation>
         <source>Fourth point:</source>
         <translation type="unfinished">Fourth point:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_cs_CZ.ts

@@ -555,6 +555,10 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -658,6 +662,10 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -824,6 +832,10 @@
         <source>Tool cubic bezier</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -851,6 +863,10 @@
         <source>Tool cubic bezier path</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1448,6 +1464,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4465,6 +4485,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -4584,6 +4608,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -6583,6 +6611,14 @@ Chcete uložit své změny?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>
@@ -7813,6 +7849,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -9427,6 +9471,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_de_DE.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Farbe:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Farbe:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1674,6 +1690,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4843,6 +4863,10 @@ Einstellungen trotzdem anwenden?</translation>
         <source>Calculation</source>
         <translation type="unfinished">Berechnung</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -4974,6 +4998,10 @@ Einstellungen trotzdem anwenden?</translation>
         <source>Calculation</source>
         <translation type="unfinished">Berechnung</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -7138,6 +7166,14 @@ Sollen die Änderungen gespeichert werden?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8469,6 +8505,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10258,6 +10302,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation type="unfinished">Vierter Punkt:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_el_GR.ts

@@ -645,6 +645,10 @@
         <source>Color:</source>
         <translation>Χρώμα:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -748,6 +752,10 @@
         <source>Color:</source>
         <translation>Χρώμα:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -914,6 +922,10 @@
         <source>Tool cubic bezier</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -941,6 +953,10 @@
         <source>Tool cubic bezier path</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1448,6 +1464,14 @@
         <source>Forbid flipping</source>
         <translation type="vanished">Περιορισμός αντιστροφής</translation>
     </message>
+    <message>
+        <source>Letter of pattern piece</source>
+        <translation type="vanished">Γράμμα του κομματιού πατρόν</translation>
+    </message>
+    <message>
+        <source>Name can&apos;t be empty</source>
+        <translation type="vanished">Το όνομα δε μπορεί να είναι κενό</translation>
+    </message>
     <message>
         <source>Grainline</source>
         <translation type="vanished">Ισιάδα</translation>
@@ -1637,7 +1661,7 @@
     </message>
     <message>
         <source>Filter list by keyword</source>
-        <translation type="unfinished"></translation>
+        <translation>Φιλτράρισμα λίστας με λέξη κλειδί</translation>
     </message>
 </context>
 <context>
@@ -1648,7 +1672,7 @@
     </message>
     <message>
         <source>Formula wizard</source>
-        <translation type="unfinished">Βοηθός φόρμουλας</translation>
+        <translation>Βοηθός φόρμουλας</translation>
     </message>
     <message>
         <source>Value</source>
@@ -1730,6 +1754,10 @@
         <source>Elliptical arc</source>
         <translation>Ελλειπτικό τόξο</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -3549,7 +3577,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Formula wizard</source>
-        <translation type="unfinished">Βοηθός φόρμουλας</translation>
+        <translation>Βοηθός φόρμουλας</translation>
     </message>
     <message>
         <source>Value</source>
@@ -3573,7 +3601,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Before:</source>
-        <translation type="unfinished"></translation>
+        <translation>Πριν:</translation>
     </message>
     <message>
         <source>Return to default width</source>
@@ -3585,7 +3613,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>After:</source>
-        <translation type="unfinished"></translation>
+        <translation>Μετά:</translation>
     </message>
     <message>
         <source>Angle:</source>
@@ -4835,6 +4863,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation>Υπολογισμός</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -4966,6 +4998,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation>Υπολογισμός</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -7074,6 +7110,14 @@ Do you want to save your changes?</source>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>
@@ -8061,7 +8105,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Formula wizard</source>
-        <translation type="unfinished">Βοηθός φόρμουλας</translation>
+        <translation>Βοηθός φόρμουλας</translation>
     </message>
     <message>
         <source>Value</source>
@@ -8108,7 +8152,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Letter of pattern piece</source>
-        <translation type="unfinished"></translation>
+        <translation>Γράμμα του κομματιού πατρόν</translation>
     </message>
     <message>
         <source>Name of detail:</source>
@@ -8120,7 +8164,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Name can&apos;t be empty</source>
-        <translation type="unfinished"></translation>
+        <translation>Το όνομα δε μπορεί να είναι κενό</translation>
     </message>
     <message>
         <source>Material/Cut number/Placement</source>
@@ -8168,7 +8212,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Formula wizard</source>
-        <translation type="unfinished">Βοηθός φόρμουλας</translation>
+        <translation>Βοηθός φόρμουλας</translation>
     </message>
     <message>
         <source>Value</source>
@@ -8298,7 +8342,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Formula wizard</source>
-        <translation type="unfinished">Βοηθός φόρμουλας</translation>
+        <translation>Βοηθός φόρμουλας</translation>
     </message>
     <message>
         <source>Value</source>
@@ -8322,7 +8366,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Before:</source>
-        <translation type="unfinished"></translation>
+        <translation>Πριν:</translation>
     </message>
     <message>
         <source>Return to default width</source>
@@ -8334,7 +8378,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>After:</source>
-        <translation type="unfinished"></translation>
+        <translation>Μετά:</translation>
     </message>
     <message>
         <source>Angle:</source>
@@ -8368,6 +8412,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10076,6 +10128,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation type="unfinished">Τέταρτο σημείο:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_en_CA.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Tool cubic bezier</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation>Tool cubic bezier path</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1794,6 +1810,10 @@
         <source>Elliptical arc</source>
         <translation>Elliptical arc</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4988,6 +5008,10 @@ Apply settings anyway?</translation>
         <source>Calculation</source>
         <translation>Calculation</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5119,6 +5143,10 @@ Apply settings anyway?</translation>
         <source>Calculation</source>
         <translation>Calculation</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -6845,19 +6873,19 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>Export increments to CSV</source>
-        <translation type="unfinished"></translation>
+        <translation>Export increments to CSV</translation>
     </message>
     <message>
         <source>Name</source>
-        <translation type="unfinished">Name</translation>
+        <translation>Name</translation>
     </message>
     <message>
         <source>The calculated value</source>
-        <translation type="unfinished">The calculated value</translation>
+        <translation>The calculated value</translation>
     </message>
     <message>
         <source>Formula</source>
-        <translation type="unfinished">Formula</translation>
+        <translation>Formula</translation>
     </message>
 </context>
 <context>
@@ -7315,6 +7343,14 @@ Do you want to save your changes?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation>By default forbid flipping for all new created workpieces</translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8662,6 +8698,14 @@ Do you want to save your changes?</translation>
         <source>Built in</source>
         <translation>Built in</translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10531,6 +10575,10 @@ Do you want to save your changes?</translation>
         <source>Fourth point:</source>
         <translation>Fourth point:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_en_IN.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Tool cubic bezier</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation>Tool cubic bezier path</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1794,6 +1810,10 @@
         <source>Elliptical arc</source>
         <translation>Elliptical arc</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4988,6 +5008,10 @@ Apply settings anyway?</translation>
         <source>Calculation</source>
         <translation>Calculation</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5119,6 +5143,10 @@ Apply settings anyway?</translation>
         <source>Calculation</source>
         <translation>Calculation</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -6845,19 +6873,19 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>Export increments to CSV</source>
-        <translation type="unfinished"></translation>
+        <translation>Export increments to CSV</translation>
     </message>
     <message>
         <source>Name</source>
-        <translation type="unfinished">Name</translation>
+        <translation>Name</translation>
     </message>
     <message>
         <source>The calculated value</source>
-        <translation type="unfinished">The calculated value</translation>
+        <translation>The calculated value</translation>
     </message>
     <message>
         <source>Formula</source>
-        <translation type="unfinished">Formula</translation>
+        <translation>Formula</translation>
     </message>
 </context>
 <context>
@@ -7315,6 +7343,14 @@ Do you want to save your changes?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation>By default forbid flipping for all new created workpieces</translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8662,6 +8698,14 @@ Do you want to save your changes?</translation>
         <source>Built in</source>
         <translation>Built in</translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10531,6 +10575,10 @@ Do you want to save your changes?</translation>
         <source>Fourth point:</source>
         <translation>Fourth point:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_en_US.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Tool cubic bezier</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation>Tool cubic bezier path</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1794,6 +1810,10 @@
         <source>Elliptical arc</source>
         <translation>Elliptical arc</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4988,6 +5008,10 @@ Apply settings anyway?</translation>
         <source>Calculation</source>
         <translation>Calculation</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5119,6 +5143,10 @@ Apply settings anyway?</translation>
         <source>Calculation</source>
         <translation>Calculation</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -6845,19 +6873,19 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>Export increments to CSV</source>
-        <translation type="unfinished"></translation>
+        <translation>Export increments to CSV</translation>
     </message>
     <message>
         <source>Name</source>
-        <translation type="unfinished">Name</translation>
+        <translation>Name</translation>
     </message>
     <message>
         <source>The calculated value</source>
-        <translation type="unfinished">The calculated value</translation>
+        <translation>The calculated value</translation>
     </message>
     <message>
         <source>Formula</source>
-        <translation type="unfinished">Formula</translation>
+        <translation>Formula</translation>
     </message>
 </context>
 <context>
@@ -7315,6 +7343,14 @@ Do you want to save your changes?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation>By default forbid flipping for all new created workpieces</translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8662,6 +8698,14 @@ Do you want to save your changes?</translation>
         <source>Built in</source>
         <translation>Built in</translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10531,6 +10575,10 @@ Do you want to save your changes?</translation>
         <source>Fourth point:</source>
         <translation>Fourth point:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_es_ES.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Color:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Herramienta bezier cúbico</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation>Herramienta ruta bezier cúbica</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1795,6 +1811,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished">Arco elíptico</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4988,6 +5008,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation>Cálculo</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5119,6 +5143,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation>Cálculo</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -7315,6 +7343,14 @@ Quiere guardar los cambios?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished">Por defecto olvidar voltear todos los nuevos trabajos</translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8662,6 +8698,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10531,6 +10575,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation type="unfinished">Cuarto punto:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_fi_FI.ts

@@ -548,6 +548,10 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -651,6 +655,10 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -817,6 +825,10 @@
         <source>Tool cubic bezier</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -844,6 +856,10 @@
         <source>Tool cubic bezier path</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1441,6 +1457,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4446,6 +4466,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -4565,6 +4589,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -6568,6 +6596,14 @@ Haluatko tallentaa muutokset?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>
@@ -7802,6 +7838,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -9420,6 +9464,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_fr_FR.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Couleur:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Couleur:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Outil courbe de bezier cubique</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation>Outil trajectoire de la courbe de bezier</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1794,6 +1810,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished">Arc éliptique</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4985,6 +5005,10 @@ Appliquer les réglages quand-même ?</translation>
         <source>Calculation</source>
         <translation>Calcul</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5116,6 +5140,10 @@ Appliquer les réglages quand-même ?</translation>
         <source>Calculation</source>
         <translation>Calcul</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -7300,6 +7328,14 @@ Voulez-vous sauvegarder les changements?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8647,6 +8683,14 @@ Voulez-vous enregistrer les changements?</translation>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10487,6 +10531,10 @@ Voulez-vous enregistrer les changements?</translation>
         <source>Fourth point:</source>
         <translation type="unfinished">Quatrième point:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_he_IL.ts

@@ -361,6 +361,10 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -444,6 +448,10 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -586,6 +594,10 @@
         <source>Tool cubic bezier</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -613,6 +625,10 @@
         <source>Tool cubic bezier path</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1086,6 +1102,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -3724,6 +3744,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -3815,6 +3839,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -5639,6 +5667,14 @@ Do you want to save your changes?</source>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>
@@ -6849,6 +6885,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapePreferencesConfigurationPage</name>
@@ -8285,6 +8329,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_id_ID.ts

@@ -524,6 +524,10 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -619,6 +623,10 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -781,6 +789,10 @@
         <source>Tool cubic bezier</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -808,6 +820,10 @@
         <source>Tool cubic bezier path</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1341,6 +1357,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4043,6 +4063,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -4134,6 +4158,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -5975,6 +6003,14 @@ Apakah anda ingin menyimpan perubahan anda?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>
@@ -7185,6 +7221,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -8675,6 +8719,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_it_IT.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Colore:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Colore:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Strumento curva di bezier</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -957,6 +969,10 @@
         <source>Tool cubic bezier path</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1718,6 +1734,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4896,6 +4916,10 @@ Applicare le impostazioni comunque?</translation>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5027,6 +5051,10 @@ Applicare le impostazioni comunque?</translation>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -7207,6 +7235,14 @@ Vuoi salvare i cambiamenti?</translation>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8554,6 +8590,14 @@ Vuoi salvare le tue modifiche?</translation>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10281,6 +10325,10 @@ Vuoi salvare le tue modifiche?</translation>
         <source>Fourth point:</source>
         <translation type="unfinished">Quarto punto:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_nl_NL.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Kleur:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Kleur:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Kubisachtige bezier gereedschap</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation>Kubisachtige bezier gereedschaps pad</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1490,7 +1506,7 @@
     </message>
     <message>
         <source>Forbid piece be mirrored in a layout.</source>
-        <translation type="vanished">Het deel spiegelen is in de opmaak modus niet toegestaan</translation>
+        <translation type="vanished">Het deel spiegelen is in de opmaak modus niet toegestaan.</translation>
     </message>
     <message>
         <source>Forbid flipping</source>
@@ -1794,6 +1810,10 @@
         <source>Elliptical arc</source>
         <translation>Ellipsvormige boog</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4988,6 +5008,10 @@ Toch de instellingen aanpassen?</translation>
         <source>Calculation</source>
         <translation>Berekening</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5119,6 +5143,10 @@ Toch de instellingen aanpassen?</translation>
         <source>Calculation</source>
         <translation>Berekening</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -7314,6 +7342,14 @@ Do you want to save your changes?</source>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation>Standaard is het kantelen voor alle nieuwe werkstukken uitgeschakeld</translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8661,6 +8697,14 @@ Wil je deze veranderingen opslaan?</translation>
         <source>Built in</source>
         <translation>Ingebouwd</translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10530,6 +10574,10 @@ Wil je deze veranderingen opslaan?</translation>
         <source>Fourth point:</source>
         <translation>Vierde punt:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_ro_RO.ts

@@ -649,6 +649,10 @@
         <source>Color:</source>
         <translation>Culoare:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -752,6 +756,10 @@
         <source>Color:</source>
         <translation>Culoare:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -918,6 +926,10 @@
         <source>Tool cubic bezier</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -945,6 +957,10 @@
         <source>Tool cubic bezier path</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1606,6 +1622,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4491,6 +4511,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished">Calcul</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -4610,6 +4634,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished">Calcul</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -6545,6 +6573,14 @@ Do you want to save your changes?</source>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>
@@ -7771,6 +7807,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -9312,6 +9356,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_ru_RU.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Цвет:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Цвет:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Кривая Безье</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation>Инструмент создания кубической кривой Безье</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1794,6 +1810,10 @@
         <source>Elliptical arc</source>
         <translation>Эллиптическая дуга</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4988,6 +5008,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation>Расчёт</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5119,6 +5143,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation>Расчёт</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -6845,19 +6873,19 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Export increments to CSV</source>
-        <translation type="unfinished"></translation>
+        <translation>Экспортировать прибавки в CSV</translation>
     </message>
     <message>
         <source>Name</source>
-        <translation type="unfinished"></translation>
+        <translation>Имя</translation>
     </message>
     <message>
         <source>The calculated value</source>
-        <translation type="unfinished">Рассчитанное значение</translation>
+        <translation>Рассчитанное значение</translation>
     </message>
     <message>
         <source>Formula</source>
-        <translation type="unfinished">Формула</translation>
+        <translation>Формула</translation>
     </message>
 </context>
 <context>
@@ -7315,6 +7343,14 @@ Do you want to save your changes?</source>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation>По умолчанию запретить поворот для всех вновь созданных заготовок деталей</translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8662,6 +8698,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation>Встроенная</translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10531,6 +10575,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation>Четвертая точка:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_uk_UA.ts

@@ -657,6 +657,10 @@
         <source>Color:</source>
         <translation>Колір:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -760,6 +764,10 @@
         <source>Color:</source>
         <translation>Колір:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -930,6 +938,10 @@
         <source>Tool cubic bezier</source>
         <translation>Інструмент кубічна крива безье</translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -961,6 +973,10 @@
         <source>Tool cubic bezier path</source>
         <translation>Інструмент складна кубічна крива безье</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1794,6 +1810,10 @@
         <source>Elliptical arc</source>
         <translation>Еліптична дуга</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -4988,6 +5008,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation>Розрахунок</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -5119,6 +5143,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation>Розрахунок</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -6844,19 +6872,19 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Export increments to CSV</source>
-        <translation type="unfinished"></translation>
+        <translation>Експортувати прибавки до CSV</translation>
     </message>
     <message>
         <source>Name</source>
-        <translation type="unfinished"></translation>
+        <translation>Ім&apos;я</translation>
     </message>
     <message>
         <source>The calculated value</source>
-        <translation type="unfinished">Розраховане значення</translation>
+        <translation>Розраховане значення</translation>
     </message>
     <message>
         <source>Formula</source>
-        <translation type="unfinished">Формула</translation>
+        <translation>Формула</translation>
     </message>
 </context>
 <context>
@@ -7314,6 +7342,14 @@ Do you want to save your changes?</source>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation>За замовчуванням заборонити віддзеркалення для всіх нових створених деталей</translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QApplication</name>
@@ -8661,6 +8697,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation>Вбудована</translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -10529,6 +10573,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation>Четверта точка:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>

share/translations/valentina_zh_CN.ts

@@ -415,6 +415,10 @@
         <source>Color:</source>
         <translation>颜色:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogArcWithLength</name>
@@ -490,6 +494,10 @@
         <source>Color:</source>
         <translation>颜色:</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogBisector</name>
@@ -628,6 +636,10 @@
         <source>Tool cubic bezier</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen Style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCubicBezierPath</name>
@@ -655,6 +667,10 @@
         <source>Tool cubic bezier path</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogCurveIntersectAxis</name>
@@ -1120,6 +1136,10 @@
         <source>Elliptical arc</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogEndLine</name>
@@ -3710,6 +3730,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished">打算</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogSplinePath</name>
@@ -3805,6 +3829,10 @@ Apply settings anyway?</source>
         <source>Calculation</source>
         <translation type="unfinished">打算</translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogTapePreferences</name>
@@ -4580,7 +4608,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error wrong id.</source>
-        <translation type="unfinished"></translation>
+        <translation>错误:编码错误.</translation>
     </message>
     <message>
         <source>Error parsing file (std::bad_alloc).</source>
@@ -5635,6 +5663,14 @@ Do you want to save your changes?</source>
         <source>By default forbid flipping for all new created workpieces</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>By default hide the main path if the seam allowance was enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QCommandLineParser</name>
@@ -6853,6 +6889,14 @@ Do you want to save your changes?</source>
         <source>Built in</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Hide the main path if the seam allowance is enabled</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Hide main path</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TapeConfigDialog</name>
@@ -7614,7 +7658,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Error wrong id.</source>
-        <translation type="unfinished"></translation>
+        <translation>错误:编码错误.</translation>
     </message>
     <message>
         <source>Error parsing file (std::bad_alloc).</source>
@@ -8318,6 +8362,10 @@ Do you want to save your changes?</source>
         <source>Fourth point:</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Pen style:</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolSeamAllowance</name>