pentabug/fw_test/README.md
2013-08-15 04:42:08 +02:00

508 B

Test firmware

Use this firmware to test all hardware components of a Pentabug. Add a pentatonic extension and press all buttons. The buttons test the following components (from left to right):

  • flash LED 1
  • send IR signal; receiving this signal flashes LED 2
  • plays (lower) tone using BUZGND
  • plays (higher) tone using BUZZR
  • starts the vibration motor

This test should catch most obvious errors, but not all possible errors. Some pinouts are not tested (e.g. JP3 and some pins of JP4 and JP5).