valentina_old/share/translations/valentina_id_ID.ts
Roman Telezhynskyi 8e44bacc15 Forgot run lupdate.
--HG--
branch : release
2015-04-24 14:09:28 +03:00

6486 lines
221 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="id">
<context>
<name>AddDet</name>
<message>
<source>Add detail</source>
<translation>tambahkan detail</translation>
</message>
</context>
<context>
<name>AddPatternPiece</name>
<message>
<source>Add pattern piece %1</source>
<translation>Tambahkan Potongan Pola %1</translation>
</message>
</context>
<context>
<name>AddToCalc</name>
<message>
<source>Add object</source>
<translation>tambahkan obyek</translation>
</message>
</context>
<context>
<name>AddUnionDetails</name>
<message>
<source>Add union details</source>
<translation>Tambah rincian himpunan</translation>
</message>
</context>
<context>
<name>CommunityPage</name>
<message>
<source>Server</source>
<translation>Server</translation>
</message>
<message>
<source>Server name/IP</source>
<translation>Nama Server/IP</translation>
</message>
<message>
<source>Secure connection</source>
<translation>Sambungan Aman</translation>
</message>
<message>
<source>Proxy settings</source>
<translation>Setingan Proxy</translation>
</message>
<message>
<source>Use Proxy</source>
<translation>Gunakan Proxy</translation>
</message>
<message>
<source>Proxy address</source>
<translation>Alamat Proxy</translation>
</message>
<message>
<source>Proxy port</source>
<translation>Saluran Proxy</translation>
</message>
<message>
<source>Proxy user</source>
<translation>Pengguna Proxy</translation>
</message>
<message>
<source>Proxy pass</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>User settings</source>
<translation>Pengaturan Pengguna</translation>
</message>
<message>
<source>User Name</source>
<translation>Nama Pengguna</translation>
</message>
<message>
<source>Save password</source>
<translation>Simpan sandi</translation>
</message>
<message>
<source>Password</source>
<translation>Sandi</translation>
</message>
</context>
<context>
<name>ConfigDialog</name>
<message>
<source>Apply</source>
<translation>Terapkan</translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation>&amp;Batalkan</translation>
</message>
<message>
<source>&amp;Ok</source>
<translation>&amp;Ok</translation>
</message>
<message>
<source>Config Dialog</source>
<translation>Dialog konfigurasi</translation>
</message>
<message>
<source>Configuration</source>
<translation>Konfigurasi</translation>
</message>
<message>
<source>Pattern</source>
<translation>Pola</translation>
</message>
<message>
<source>Community</source>
<translation>Komunitas</translation>
</message>
<message>
<source>Paths</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>ConfigurationPage</name>
<message>
<source>Setup user interface language updated and will be used the next time start</source>
<translation>Pengaturan bahasa antarmuka pengguna diperbarui dan akan digunakan waktu mulai berikutnya</translation>
</message>
<message>
<source>Default unit updated and will be used the next pattern creation</source>
<translation>Unit standar diperbarui dan akan digunakan pada pembuatan pola berikutnya</translation>
</message>
<message>
<source>Save</source>
<translation>Simpan</translation>
</message>
<message>
<source>Auto-save modified pattern</source>
<translation>Simpan otomatis Pola yang telah dimodifikasi</translation>
</message>
<message>
<source>min</source>
<translation>minimal</translation>
</message>
<message>
<source>Interval:</source>
<translation>selang waktu</translation>
</message>
<message>
<source>Language</source>
<translation>Bahasa</translation>
</message>
<message>
<source>GUI language</source>
<translation>Bahasa GUI</translation>
</message>
<message>
<source>Decimal separator parts</source>
<translation>komponen pemisah desimal</translation>
</message>
<message>
<source>With OS options (%1)</source>
<translation>dengan pilihan OS (%1)</translation>
</message>
<message>
<source>Default unit</source>
<translation>Unit Standar</translation>
</message>
<message>
<source>Centimeters</source>
<translation>Centimeter</translation>
</message>
<message>
<source>Millimiters</source>
<translation>Milimeter</translation>
</message>
<message>
<source>Inches</source>
<translation>Inchi</translation>
</message>
<message>
<source>Label language</source>
<translation>label bahasa</translation>
</message>
<message>
<source>Send crash reports</source>
<translation>Kirim laporan kerusakan</translation>
</message>
<message>
<source>Send crash reports (recommended)</source>
<translation>Kirim laporan kerusakan (disarankan)</translation>
</message>
<message>
<source>After each crash Valentina collect information that may help us fix a problem. We do not collect any personal information. Find more about what &lt;a href=&quot;https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports&quot;&gt;kind of information&lt;/a&gt; we collect.</source>
<translation>Setelah setiap kerusakan Valentina mengumpulkan informasi yang dapat membantu kami memperbaiki suatu masalah. Kami tidak mengumpulkan informasi pribadi apapun. Temukan lebih lanjut tentang apa &lt;a href=&quot;https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports&quot;&gt; jenis informasi &lt;/a&gt; kami kumpulkan.</translation>
</message>
<message>
<source>Pattern Editing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Confirm item deletion</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DelTool</name>
<message>
<source>Delete tool</source>
<translation>Hapus alat bantu</translation>
</message>
</context>
<context>
<name>DeleteDetail</name>
<message>
<source>Delete tool</source>
<translation>Hapus alat bantu</translation>
</message>
</context>
<context>
<name>DeletePatternPiece</name>
<message>
<source>Delete pattern piece %1</source>
<translation>Hapus bagian pola % 1</translation>
</message>
</context>
<context>
<name>DialogAboutApp</name>
<message>
<source>About Valentina</source>
<translation>Mengenai Valentina</translation>
</message>
<message>
<source>Valentina version</source>
<translation>Versi Valentina</translation>
</message>
<message>
<source>Contributors</source>
<translation>para kontributor</translation>
</message>
<message>
<source>Built on %3 at %4</source>
<translation>Dibuat pada %3 at %4</translation>
</message>
<message>
<source>Web site : %1</source>
<translation>Situs web : % 1</translation>
</message>
<message>
<source>Warning</source>
<translation>peringatan</translation>
</message>
<message>
<source>Cannot open your default browser</source>
<translation>Tidak dapat membuka peramban bawaan Anda</translation>
</message>
<message>
<source>Build revision:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogAlongLine</name>
<message>
<source>Length</source>
<translation>panjang</translation>
</message>
<message>
<source>Insert variable into the formula</source>
<translation>Masukkan variabel ke dalam rumus</translation>
</message>
<message>
<source>Value of length</source>
<translation>Nilai panjang</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tampilkan penuh perhitungan dalam kotak pesan&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<source>Point label</source>
<translation>label titik</translation>
</message>
<message>
<source>First point</source>
<translation>Titik pertama</translation>
</message>
<message>
<source>First point of line</source>
<translation>Titik pertama dari baris</translation>
</message>
<message>
<source>Second point</source>
<translation>titik kedua</translation>
</message>
<message>
<source>Second point of line</source>
<translation>titik kedua dari baris</translation>
</message>
<message>
<source>Type of line</source>
<translation>Jenis baris</translation>
</message>
<message>
<source>Show line from first point to this point</source>
<translation>Tampilkan garis dari titik pertama ke titik ini</translation>
</message>
<message>
<source>Input data</source>
<translation>masukkan data</translation>
</message>
<message>
<source>Size and height</source>
<translation>Ukuran dan tinggi</translation>
</message>
<message>
<source>Measurements</source>
<translation>pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation>penambahan</translation>
</message>
<message>
<source>Length of lines</source>
<translation>Panjang garis</translation>
</message>
<message>
<source>Length of arcs</source>
<translation>Panjang busur</translation>
</message>
<message>
<source>Length of curves</source>
<translation>Panjang kurva</translation>
</message>
<message>
<source>Angle of lines</source>
<translation>Sudut garis</translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation>Sembunyikan pengukuran kosong</translation>
</message>
<message>
<source>Variables - Click twice to insert into formula</source>
<translation>Variabel - Klik dua kali untuk menyisipkan ke dalam rumus</translation>
</message>
<message>
<source>Select second point of line</source>
<translation>Pilih titik kedua dari garis</translation>
</message>
<message>
<source>Point at distance along line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogArc</name>
<message>
<source>Arc</source>
<translation>busur</translation>
</message>
<message>
<source>Radius</source>
<translation>radius
</translation>
</message>
<message>
<source>Insert variable into the formula</source>
<translation>sisipkan variabel ke dalam formula</translation>
</message>
<message>
<source>Value of radius</source>
<translation>nilai radius</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tampilkan perhitungan penuh dalam kotak pesa&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<source>First angle</source>
<translation>sudut pertama</translation>
</message>
<message>
<source>Insert variable into formula</source>
<translation>sisipkan variabel ke dalam formula</translation>
</message>
<message>
<source>Value of first angle</source>
<translation>nilai dari sudut pertama</translation>
</message>
<message>
<source>Second angle</source>
<translation>sudut kedua</translation>
</message>
<message>
<source>Insert marked variable into formula</source>
<translation>sisipkan variabel yang ditandai ke dalam formula</translation>
</message>
<message>
<source>Value of second angle</source>
<translation>nilai dari sudut kedua</translation>
</message>
<message>
<source>Center point</source>
<translation>titik tengah</translation>
</message>
<message>
<source>Select point of center of arc</source>
<translation>pilih titik tengah dari busur</translation>
</message>
<message>
<source>Input data</source>
<translation>masukkan data</translation>
</message>
<message>
<source>Size and height</source>
<translation>ukuran dan tinggi</translation>
</message>
<message>
<source>Measurements</source>
<translation>pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation>tambahan</translation>
</message>
<message>
<source>Length of lines</source>
<translation>panjang garis</translation>
</message>
<message>
<source>Length of arcs</source>
<translation>panjang busur</translation>
</message>
<message>
<source>Length of curves</source>
<translation>panjang kurva</translation>
</message>
<message>
<source>Angle of lines</source>
<translation>sudut garis</translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation>sembunyikan pengukuran yang kosong</translation>
</message>
<message>
<source>Variables</source>
<translation>variabel</translation>
</message>
<message>
<source>Error</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Radius can&apos;t be negative</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angles equal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogBisector</name>
<message>
<source>Length</source>
<translation>panjang</translation>
</message>
<message>
<source>Insert marked variable into the formula</source>
<translation>sisipkan variabel yang ditandai ke dalam rumus</translation>
</message>
<message>
<source>Value of length</source>
<translation>nilai panjang</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tampilkan penuh perhitungan dalam kotak pesan&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<source>Point label</source>
<translation>label titik</translation>
</message>
<message>
<source>First point</source>
<translation>Titik pertama</translation>
</message>
<message>
<source>First point of angle</source>
<translation>Titik pertama dari sudut</translation>
</message>
<message>
<source>Second point</source>
<translation>titik kedua</translation>
</message>
<message>
<source>Second point of angle</source>
<translation>titik kedua dari sudut</translation>
</message>
<message>
<source>Third point</source>
<translation>titik ketiga</translation>
</message>
<message>
<source>Third point of angle</source>
<translation>titik ketiga dari sudut</translation>
</message>
<message>
<source>Type of line</source>
<translation>Jenis baris</translation>
</message>
<message>
<source>Show line from second point to this point</source>
<translation>Tampilkan garis dari titik kedua ke titik ini</translation>
</message>
<message>
<source>Input data</source>
<translation>masukan data</translation>
</message>
<message>
<source>Size and height</source>
<translation>ukuran dan panjang</translation>
</message>
<message>
<source>Measurements</source>
<translation>pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation>tambahan</translation>
</message>
<message>
<source>Length of lines</source>
<translation>Panjang garis</translation>
</message>
<message>
<source>Length of arcs</source>
<translation>Panjang busur</translation>
</message>
<message>
<source>Length of curves</source>
<translation>Panjang kurva</translation>
</message>
<message>
<source>Angle of lines</source>
<translation>Sudut garis</translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation>Sembunyikan pengukuran kosong</translation>
</message>
<message>
<source>Variables - Click twice to insert into formula</source>
<translation>Variabel - Klik dua kali untuk menyisipkan ke dalam rumus</translation>
</message>
<message>
<source>Select second point of angle</source>
<translation>Pilih titik kedua dari sudut</translation>
</message>
<message>
<source>Select third point of angle</source>
<translation>Pilih titik ketiga dari garis</translation>
</message>
<message>
<source>Point along bisector</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCurveIntersectAxis</name>
<message>
<source>Angle</source>
<translation>sudut</translation>
</message>
<message>
<source>Value of angle</source>
<translation>nilai dari sudut</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tampilkan penuh perhitungan dalam kotak pesan&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<source>Axis point</source>
<translation>titik sumbu</translation>
</message>
<message>
<source>Curve</source>
<translation>kurva</translation>
</message>
<message>
<source>Point label</source>
<translation>label titik</translation>
</message>
<message>
<source>Type of line</source>
<translation>Jenis baris</translation>
</message>
<message>
<source>Show line from first point to this point</source>
<translation>Tampilkan garis dari titik pertama ke titik ini</translation>
</message>
<message>
<source>Input data</source>
<translation>masukan data</translation>
</message>
<message>
<source>Size and height</source>
<translation>ukuran dan panjang</translation>
</message>
<message>
<source>Measurements</source>
<translation>pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation>tambahan</translation>
</message>
<message>
<source>Length of lines</source>
<translation>panjang garis</translation>
</message>
<message>
<source>Length of arcs</source>
<translation>panjang busur</translation>
</message>
<message>
<source>Length of curves</source>
<translation>Panjang kurva</translation>
</message>
<message>
<source>Angle of lines</source>
<translation>Sudut garis</translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation>Sembunyikan pengukuran kosong</translation>
</message>
<message>
<source>Variables</source>
<translation>variabel</translation>
</message>
<message>
<source>Select axis point</source>
<translation>pilih titik sumbu</translation>
</message>
<message>
<source>Point intersect curve and axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Axis Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
<message>
<source>Length</source>
<translation>panjang</translation>
</message>
<message>
<source>Value of length</source>
<translation>Nilai panjang</translation>
</message>
<message>
<source>_</source>
<translation>-</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tampilkan perhitungan penuh dalam kotak pesan&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<source>Arc</source>
<translation>busur</translation>
</message>
<message>
<source>Point label</source>
<translation>label titik</translation>
</message>
<message>
<source>Input data</source>
<translation>masukan data</translation>
</message>
<message>
<source>Size and height</source>
<translation>ukuran dan panjang</translation>
</message>
<message>
<source>Measurements</source>
<translation>pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation>tambahan</translation>
</message>
<message>
<source>Length of lines</source>
<translation>panjang garis</translation>
</message>
<message>
<source>Length of arcs</source>
<translation>panjang busur</translation>
</message>
<message>
<source>Length of curves</source>
<translation>Panjang kurva</translation>
</message>
<message>
<source>Angle of lines</source>
<translation>Sudut garis</translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation>Sembunyikan pengukuran kosong</translation>
</message>
<message>
<source>Variables - Click twice to insert into formula</source>
<translation>Variabel - Klik dua kali untuk menyisipkan ke dalam rumus</translation>
</message>
<message>
<source>Segment an arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Selected arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutSpline</name>
<message>
<source>Length</source>
<translation>panjang</translation>
</message>
<message>
<source>Value of length</source>
<translation>Nilai panjang</translation>
</message>
<message>
<source>_</source>
<translation>_</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tampilkan perhitungan penuh dalam kotak pesan&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<source>Curve</source>
<translation>kurva</translation>
</message>
<message>
<source>Selected curve</source>
<translation>kurva yang telah dipilih</translation>
</message>
<message>
<source>Point label</source>
<translation>label titik</translation>
</message>
<message>
<source>Input data</source>
<translation>masukan data</translation>
</message>
<message>
<source>Size and height</source>
<translation>ukuran dan panjang</translation>
</message>
<message>
<source>Measurements</source>
<translation>pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation>tambahan</translation>
</message>
<message>
<source>Length of lines</source>
<translation>panjang garis</translation>
</message>
<message>
<source>Length of arcs</source>
<translation>panjang busur</translation>
</message>
<message>
<source>Length of curves</source>
<translation>Panjang kurva</translation>
</message>
<message>
<source>Angle of lines</source>
<translation>Sudut garis</translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation>Sembunyikan pengukuran kosong</translation>
</message>
<message>
<source>Variables - Click twice to insert into formula</source>
<translation>Variabel - Klik dua kali untuk menyisipkan ke dalam rumus</translation>
</message>
<message>
<source>Segmenting a simple curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutSplinePath</name>
<message>
<source>Length</source>
<translation>panjang</translation>
</message>
<message>
<source>Value of length</source>
<translation>Nilai panjang</translation>
</message>
<message>
<source>_</source>
<translation>_</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tampilkan perhitungan penuh dalam kotak pesan&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<source>Curve</source>
<translation>kurva</translation>
</message>
<message>
<source>Selected curve path</source>
<translation>jalur kurva yang telah dipilih</translation>
</message>
<message>
<source>Point label</source>
<translation>label titik</translation>
</message>
<message>
<source>Input data</source>
<translation>masukan data</translation>
</message>
<message>
<source>Size and height</source>
<translation>ukuran dan panjang</translation>
</message>
<message>
<source>Measurements</source>
<translation>pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation>tambahan</translation>
</message>
<message>
<source>Length of lines</source>
<translation>panjang garis</translation>
</message>
<message>
<source>Length of arcs</source>
<translation>panjang busur</translation>
</message>
<message>
<source>Length of curves</source>
<translation>Panjang kurva</translation>
</message>
<message>
<source>Angle of lines</source>
<translation>Sudut garis</translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation>Sembunyikan pengukuran kosong</translation>
</message>
<message>
<source>Variables - Click twice to insert into formula</source>
<translation>Variabel - Klik dua kali untuk menyisipkan ke dalam rumus</translation>
</message>
<message>
<source>Segment a curved path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogDetail</name>
<message>
<source>Detail</source>
<translation>rincial</translation>
</message>
<message>
<source>Bias X</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>cm</source>
<translation>cm</translation>
</message>
<message>
<source>Bias Y</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Options</source>
<translation>pilihan</translation>
</message>
<message>
<source>Name of detail</source>
<translation>nama rincian</translation>
</message>
<message>
<source>Seam allowance</source>
<translation>kampuh</translation>
</message>
<message>
<source>Width</source>
<translation>lebar</translation>
</message>
<message>
<source>Closed</source>
<translation>tertutup</translation>
</message>
<message>
<source>Delete</source>
<translation>hapus</translation>
</message>
<message>
<source>Got wrong scene object. Ignore.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reverse</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Seam allowance tool</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogEditWrongFormula</name>
<message>
<source>Edit formula</source>
<translation>edit rumus</translation>
</message>
<message>
<source>Formula</source>
<translation>rumus</translation>
</message>
<message>
<source>Insert variable into formula</source>
<translation>sisipkan variabel ke dalam rumus</translation>
</message>
<message>
<source>Value of first angle</source>
<translation>nilai dari sudut pertama</translation>
</message>
<message>
<source>_</source>
<translation>_</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Tampilkan perhitungan penuh dalam kotak pesan&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<source>Input data</source>
<translation>masukan data</translation>
</message>
<message>
<source>Size and height</source>
<translation>ukuran dan panjang</translation>
</message>
<message>
<source>Measurements</source>
<translation>pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation>tambahan</translation>
</message>
<message>
<source>Length of lines</source>
<translation>panjang garis</translation>
</message>
<message>
<source>Length of arcs</source>
<translation>panjang busur</translation>
</message>
<message>
<source>Length of curves</source>
<translation>Panjang kurva</translation>
</message>
<message>
<source>Angle of lines</source>
<translation>Sudut garis</translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation>Sembunyikan pengukuran kosong</translation>
</message>
<message>
<source>Variables</source>
<translation>variabel</translation>
</message>
</context>
<context>
<name>DialogEndLine</name>
<message>
<source>Length</source>
<translation type="unfinished">panjang</translation>
</message>
<message>
<source>Value of length</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">sudut</translation>
</message>
<message>
<source>Value of angle</source>
<translation type="unfinished">nilai dari sudut</translation>
</message>
<message>
<source>Base point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First point of line</source>
<translation type="unfinished">Titik pertama dari baris</translation>
</message>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>Type of line</source>
<translation type="unfinished">Jenis baris</translation>
</message>
<message>
<source>Show line from first point to this point</source>
<translation type="unfinished">Tampilkan garis dari titik pertama ke titik ini</translation>
</message>
<message>
<source>Input data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size and height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Measurements</source>
<translation type="unfinished">pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of arcs</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of curves</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variables</source>
<translation type="unfinished">variabel</translation>
</message>
<message>
<source>Point at distance and angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogHeight</name>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>Base point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First point of line</source>
<translation type="unfinished">Titik pertama dari baris</translation>
</message>
<message>
<source>Second point of line</source>
<translation type="unfinished">titik kedua dari baris</translation>
</message>
<message>
<source>Type of line</source>
<translation type="unfinished">Jenis baris</translation>
</message>
<message>
<source>Show line from first point to our point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select first point of line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select second point of line</source>
<translation type="unfinished">Pilih titik kedua dari garis</translation>
</message>
<message>
<source>Perpendicular point along line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Base Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogHistory</name>
<message>
<source>History</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create record.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 - Base point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1_%2 - Line from point %1 to point %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%3 - Point along line %1_%2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 - Point of shoulder</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%3 - normal to line %1_%2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%4 - bisector of angle %1_%2_%3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%5 - intersection of lines %1_%2 and %3_%4</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve %1_%2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc with center in point %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve point %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%4 - point of contact of arc with the center in point %1 and line %2_%3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point of perpendicular from point %1 to line %2_%3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Triangle: axis %1_%2, points %3 and %4</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 - point of intersection %2 and %3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 - cut arc with center %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 - cut curve %2_%3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 - cut curve path %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 - point of intersection line %2_%3 and axis through point %4</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>%1 - point of intersection curve and axis through point %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogIncrements</name>
<message>
<source>Increments</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Measurements</source>
<translation type="unfinished">pengukuran</translation>
</message>
<message>
<source>Load another measurements table</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Personal information</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Given name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Family name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Birth date</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sex</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Email</source>
<translation>Surel</translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name</source>
<translation>Nama</translation>
</message>
<message>
<source>The calculated value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Base value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>In sizes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>In heights</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Description</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">panjang</translation>
</message>
<message>
<source>Curves</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve</source>
<translation type="unfinished">kurva</translation>
</message>
<message>
<source>Arcs</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc</source>
<translation type="unfinished">busur</translation>
</message>
<message>
<source>File error.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>male</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>female</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not save GivenName</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not save FamilyName</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not save Email</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not save Sex</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not save BirthDate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Measurements use different units than pattern. This pattern required measurements in %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Individual measurements (*.vit)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open file</source>
<translation>Buka file</translation>
</message>
<message>
<source>Wrong units.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Standard measurements (*.vst)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name_%1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t save measurement</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tables of Variables</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Base size: %1 %3; Base height: %2 %3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Description: &quot;%1&quot;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Data successfully saved.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogIndividualMeasurements</name>
<message>
<source>Individual measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pattern piece name</source>
<translation>Nama potongan pola</translation>
</message>
<message>
<source>Exist measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Given name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Family name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Units:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create measurements file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Please try again or change file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File error.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Individual measurements (*.vit)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Where save measurements?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Centimeters</source>
<translation type="unfinished">Centimeter</translation>
</message>
<message>
<source>Millimiters</source>
<translation type="unfinished">Milimeter</translation>
</message>
<message>
<source>Inches</source>
<translation type="unfinished">Inchi</translation>
</message>
</context>
<context>
<name>DialogLayoutProgress</name>
<message>
<source>Creation a layout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Couldn&apos;t prepare data for creation layout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Critical error</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wrong paper size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Several workpieces left not arranged, but none of them match for paper</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Finding best position for worpieces. Please, wait.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogLayoutSettings</name>
<message>
<source>Creation a layout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Paper size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Templates:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rotate workpiece</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rotate by</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>degree</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Creation options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Layout width:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shift length:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Principle of choosing the next workpiece</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Three groups: big, middle, small</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Two groups: big, small</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Descending area</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Millimiters</source>
<translation type="unfinished">Milimeter</translation>
</message>
<message>
<source>Centimeters</source>
<translation type="unfinished">Centimeter</translation>
</message>
<message>
<source>Inches</source>
<translation type="unfinished">Inchi</translation>
</message>
<message>
<source>Pixels</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogLine</name>
<message>
<source>First point</source>
<translation type="unfinished">Titik pertama</translation>
</message>
<message>
<source>Second point</source>
<translation type="unfinished">titik kedua</translation>
</message>
<message>
<source>Type of line</source>
<translation type="unfinished">Jenis baris</translation>
</message>
<message>
<source>Show line from first point to this point</source>
<translation type="unfinished">Tampilkan garis dari titik pertama ke titik ini</translation>
</message>
<message>
<source>Select second point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line between points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogLineIntersect</name>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>First line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First point</source>
<translation type="unfinished">Titik pertama</translation>
</message>
<message>
<source>Second point</source>
<translation type="unfinished">titik kedua</translation>
</message>
<message>
<source>Second line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select second point of first line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select first point of second line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select second point of second line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point at line intersection</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogLineIntersectAxis</name>
<message>
<source>Angle</source>
<translation type="unfinished">sudut</translation>
</message>
<message>
<source>Value of angle</source>
<translation type="unfinished">nilai dari sudut</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Axis point</source>
<translation type="unfinished">titik sumbu</translation>
</message>
<message>
<source>First point of line</source>
<translation type="unfinished">Titik pertama dari baris</translation>
</message>
<message>
<source>First line point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Second line point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>Type of line</source>
<translation type="unfinished">Jenis baris</translation>
</message>
<message>
<source>Show line from first point to this point</source>
<translation type="unfinished">Tampilkan garis dari titik pertama ke titik ini</translation>
</message>
<message>
<source>Input data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size and height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Measurements</source>
<translation type="unfinished">pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of arcs</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of curves</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variables</source>
<translation type="unfinished">variabel</translation>
</message>
<message>
<source>Select second point of line</source>
<translation type="unfinished">Pilih titik kedua dari garis</translation>
</message>
<message>
<source>Select axis point</source>
<translation type="unfinished">pilih titik sumbu</translation>
</message>
<message>
<source>Point intersect line and axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Axis Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Second point of line</source>
<translation type="unfinished">titik kedua dari baris</translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogMeasurements</name>
<message>
<source>Measurements</source>
<translation type="unfinished">pengukuran</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-size:18pt;&quot;&gt;Please, choose pattern type.&lt;/span&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Graduation</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use for creation pattern standard measurement table</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Individual</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use for creation pattern individual measurements</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogNormal</name>
<message>
<source>Length</source>
<translation type="unfinished">panjang</translation>
</message>
<message>
<source>Insert variable into formula</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value of length</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>First point</source>
<translation type="unfinished">Titik pertama</translation>
</message>
<message>
<source>Second point</source>
<translation type="unfinished">titik kedua</translation>
</message>
<message>
<source>Additional angle degrees</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type of line</source>
<translation type="unfinished">Jenis baris</translation>
</message>
<message>
<source>Show line from first point to this point</source>
<translation type="unfinished">Tampilkan garis dari titik pertama ke titik ini</translation>
</message>
<message>
<source>Input data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size and height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Measurements</source>
<translation type="unfinished">pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of arcs</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of curves</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variables - Click twice to insert into formula</source>
<translation type="unfinished">Variabel - Klik dua kali untuk menyisipkan ke dalam rumus</translation>
</message>
<message>
<source>Select second point of line</source>
<translation type="unfinished">Pilih titik kedua dari garis</translation>
</message>
<message>
<source>Point along perpendicular</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First point of line</source>
<translation type="unfinished">Titik pertama dari baris</translation>
</message>
<message>
<source>Second point of line</source>
<translation type="unfinished">titik kedua dari baris</translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternProperties</name>
<message>
<source>Pattern properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Description</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Author name</source>
<translation>Nama Pembuat</translation>
</message>
<message>
<source>Pattern description</source>
<translation>Keterangan Pola</translation>
</message>
<message>
<source>For technical notes.</source>
<translation>Untuk catatan teknis</translation>
</message>
<message>
<source>Heights and Sizes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All heights (cm)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All sizes (cm)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
<message>
<source>XML Editor</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value :</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name :</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;No selection&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type : </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Add attribute</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Add son</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Remove attribute</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Remove node</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Set</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cancel</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Apply changes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Undo last</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Immediate apply</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Base selection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>All pattern pieces</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No changes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot delete previously created node</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No changes left</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot undo change</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;no value&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unchanged</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cannot delete previously created attribute</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Node Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Node Value (may be empty)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Attribute Name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Attribute Value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>No selection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Root node</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Node</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Attribute</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPointOfContact</name>
<message>
<source>Radius</source>
<translation type="unfinished">radius
</translation>
</message>
<message>
<source>Insert variable into formula</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value of radius</source>
<translation type="unfinished">nilai radius</translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>Center of arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select point of center of arc</source>
<translation type="unfinished">pilih titik tengah dari busur</translation>
</message>
<message>
<source>Top of the line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>End of the line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Input data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size and height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Measurements</source>
<translation type="unfinished">pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of arcs</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of curves</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variables - Click twice to insert into formula.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select second point of line</source>
<translation type="unfinished">Pilih titik kedua dari garis</translation>
</message>
<message>
<source>Point at intersection of arc and line</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPointOfIntersection</name>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>First point of angle</source>
<translation type="unfinished">Titik pertama dari sudut</translation>
</message>
<message>
<source>Second point of angle</source>
<translation type="unfinished">titik kedua dari sudut</translation>
</message>
<message>
<source>Point from X and Y of two other points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X: vertical point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y: horizontal point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select point for Y value (horizontal)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogShoulderPoint</name>
<message>
<source>Length</source>
<translation type="unfinished">panjang</translation>
</message>
<message>
<source>Insert variable into formula</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value of length</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>First point</source>
<translation type="unfinished">Titik pertama</translation>
</message>
<message>
<source>Second point</source>
<translation type="unfinished">titik kedua</translation>
</message>
<message>
<source>Third point</source>
<translation type="unfinished">titik ketiga</translation>
</message>
<message>
<source>Type of line</source>
<translation type="unfinished">Jenis baris</translation>
</message>
<message>
<source>Show line from first point to our point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Input data</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size and height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Measurements</source>
<translation type="unfinished">pengukuran</translation>
</message>
<message>
<source>Increments</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of arcs</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length of curves</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle of lines</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hide empty measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Variables - Click twice to insert into formula</source>
<translation type="unfinished">Variabel - Klik dua kali untuk menyisipkan ke dalam rumus</translation>
</message>
<message>
<source>Select first point of line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select second point of line</source>
<translation type="unfinished">Pilih titik kedua dari garis</translation>
</message>
<message>
<source>Special point on shoulder</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogSinglePoint</name>
<message>
<source>Single point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Coordinates on the sheet</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Coordinates</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Y coordinate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>X coordinate</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
</context>
<context>
<name>DialogSpline</name>
<message>
<source>First point</source>
<translation type="unfinished">Titik pertama</translation>
</message>
<message>
<source>Length ratio of the first control point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The angle of the first control point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Second point</source>
<translation type="unfinished">titik kedua</translation>
</message>
<message>
<source>Length ratio of the second control point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The angle of the second control point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Coefficient of curvature of the curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select last point of curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Simple curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogSplinePath</name>
<message>
<source>Curved path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point of curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length ratio of the first control point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The angle of the first control point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length ratio of the second control point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The angle of the second control point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>List of points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Coefficient of curvature of the curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select point of curve path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogStandardMeasurements</name>
<message>
<source>Standard table</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pattern piece name</source>
<translation type="unfinished">Nama potongan pola</translation>
</message>
<message>
<source>Standard measurements table</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File error.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogTool</name>
<message>
<source>Error</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Empty field</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value can&apos;t be 0</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line length</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc length</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve length</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Parser error: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line Angle</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogTriangle</name>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>First point of axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First point of line</source>
<translation type="unfinished">Titik pertama dari baris</translation>
</message>
<message>
<source>Second point of axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First point</source>
<translation type="unfinished">Titik pertama</translation>
</message>
<message>
<source>Second point</source>
<translation type="unfinished">titik kedua</translation>
</message>
<message>
<source>Select second point of axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select first point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select second point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Triangle tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>First point of the axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Second point of the axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Second point of line</source>
<translation type="unfinished">titik kedua dari baris</translation>
</message>
</context>
<context>
<name>DialogUndo</name>
<message>
<source>Broken formula</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error while calculation formula. You can try undo last operation or fix broken formula.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Undo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Fix formula</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Cancel</source>
<translation type="unfinished">&amp;Batalkan</translation>
</message>
</context>
<context>
<name>DialogUnionDetails</name>
<message>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Do you really want union details?&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Union tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select a first point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Workpiece should have at least two points and three objects</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select a second point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select a unique point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select a detail</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select a point on edge</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Functions</name>
<message>
<source>sin</source>
<comment>sine function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>cos</source>
<comment>cosine function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>tan</source>
<comment>tangens function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>asin</source>
<comment>arcus sine function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>acos</source>
<comment>arcus cosine function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>atan</source>
<comment>arcus tangens function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>sinh</source>
<comment>hyperbolic sine function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>cosh</source>
<comment>hyperbolic cosine</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>tanh</source>
<comment>hyperbolic tangens function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>asinh</source>
<comment>hyperbolic arcus sine function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>acosh</source>
<comment>hyperbolic arcus tangens function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>atanh</source>
<comment>hyperbolic arcur tangens function</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>log2</source>
<comment>logarithm to the base 2</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>log10</source>
<comment>logarithm to the base 10</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>log</source>
<comment>logarithm to the base 10</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>ln</source>
<comment>logarithm to base e (2.71828...)</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>exp</source>
<comment>e raised to the power of x</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>sqrt</source>
<comment>square root of a value</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>sign</source>
<comment>sign function -1 if x&lt;0; 1 if x&gt;0</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>rint</source>
<comment>round to nearest integer</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>abs</source>
<comment>absolute value</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>min</source>
<comment>min of all arguments</comment>
<translation type="unfinished">minimal</translation>
</message>
<message>
<source>max</source>
<comment>max of all arguments</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>sum</source>
<comment>sum of all arguments</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>avg</source>
<comment>mean value of all arguments</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>InternalStrings</name>
<message>
<source>The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindow</name>
<message>
<source>Valentina</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tools for creating points.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point along perpendicular</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Perpendicular point along line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point along bisector</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point at distance and angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point at distance along line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tools for creating lines.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line between points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point at line intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tools for creating curves.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve</source>
<translation type="unfinished">kurva</translation>
</message>
<message>
<source>Tools for creating arcs.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc</source>
<translation type="unfinished">busur</translation>
</message>
<message>
<source>Tools for creating details.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Detail</source>
<translation type="unfinished">rincial</translation>
</message>
<message>
<source>&amp;File</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Help</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Pattern piece</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Measurements</source>
<translation type="unfinished">pengukuran</translation>
</message>
<message>
<source>Window</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Toolbar files</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>ToolBar modes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Toolbar pattern</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Toolbar options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Toolbar tools</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tool options</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;New</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create a new pattern</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+N</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Open</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open file with pattern</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save</source>
<translation type="unfinished">Simpan</translation>
</message>
<message>
<source>&amp;Save</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save pattern</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+S</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save &amp;As...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save not yet saved pattern</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+Shift+S</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Draw</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Draw mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+W</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Details</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Details mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+E</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pointer tools</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>New pattern piece</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Add new pattern piece</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+Shift+N</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Change the label of pattern piece</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Table of variables</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tables of variables</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+T</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>History</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+H</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Export pattern (layout)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Create layout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+L</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>About &amp;Qt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;About Valentina</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>E&amp;xit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Exit the application</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+Q</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Preferences</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pattern properties</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Zoom in</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>zoom in</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Zoom out</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit pattern XML code</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Original zoom </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Original Zoom </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Zoom fit best</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ctrl+=</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Stop</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Stop using tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Repot Bug...</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Report bug</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Close window</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Online help</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Show online help</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pattern piece %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Individual measurements is under development</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>There is no way create individual measurements file independent on the pattern file.
For opening pattern need keep both files: pattern and measurements. Do you want continue?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select first point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select first point of line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select first point of angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select first point of first line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select first point curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select simple curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select point of center of arc</source>
<translation type="unfinished">pilih titik tengah dari busur</translation>
</message>
<message>
<source>Select point of curve path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select curve path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select points, arcs, curves clockwise.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select base point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select first point of axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select detail</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>About Qt</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pattern Piece: </source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pattern files (*.val)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>pattern</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>/pattern.val</source>
<translation>/Pola.val</translation>
</message>
<message>
<source>Save as</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not save file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open file</source>
<translation>Buka File</translation>
</message>
<message>
<source>Error parsing file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error can&apos;t convert value.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error empty parameter.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error wrong id.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Critical error!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error parsing file (std::bad_alloc).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bad id.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File saved</source>
<translation>File telah disimpan</translation>
</message>
<message>
<source>untitled.val</source>
<translation>tanpajudul.val</translation>
</message>
<message>
<source>Unsaved change</source>
<translation>Perubahan belum disimpan</translation>
</message>
<message>
<source>The pattern has been modified.
Do you want to save your changes?</source>
<translation>Pola telah dimodiikasi
Apakah anda ingin menyimpan perubahan anda?</translation>
</message>
<message>
<source>&amp;Undo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&amp;Redo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Pattern piece:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Enter a new label for the pattern piece.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This file already opened in another window.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wrong units.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Application doesn&apos;t support standard table with inches.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File error.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File loaded</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Valentina didn&apos;t shut down correctly. Do you want reopen files (%1) you had open?</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Reopen files.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>The measurements file &lt;br/&gt;&lt;br/&gt; &lt;b&gt;%1&lt;/b&gt; &lt;br/&gt;&lt;br/&gt; %3</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>could not be found. Do you want to update the file location</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Standard measurements (*.vst)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Individual measurements (*.vit)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Special point on shoulder</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Triangle tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point at intersection of arc and line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point from X and Y of two other points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point intersect line and axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Simple curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curved path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segmenting a simple curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment a curved path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point intersect curve and axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment an arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point intersect arc and axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Seam allowance tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Union tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>toolBar</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Last Tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Activate last used tool again</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>L</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Select point for X value (vertical)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Measurements</name>
<message>
<source>head_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Lingkar Kepala</translation>
</message>
<message>
<source>mid_neck_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Setengah Lingkar Leher</translation>
</message>
<message>
<source>neck_base_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Lingkar Leher Bawah</translation>
</message>
<message>
<source>head_and_neck_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Panjang Leher dan Kepala</translation>
</message>
<message>
<source>center_front_waist_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>center_back_waist_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>shoulder_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Panjang Bahu</translation>
</message>
<message>
<source>side_waist_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Panjang Sisi Pinggang</translation>
</message>
<message>
<source>trunk_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Panjang Badan</translation>
</message>
<message>
<source>shoulder_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Lingkar Bahu</translation>
</message>
<message>
<source>upper_chest_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Lingkar data atas</translation>
</message>
<message>
<source>bust_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Lingkar dada/payudara</translation>
</message>
<message>
<source>under_bust_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>lingkar bawah payudara</translation>
</message>
<message>
<source>waist_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Lingkar Pinggang</translation>
</message>
<message>
<source>high_hip_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Tinggi Lingkar Pinggul</translation>
</message>
<message>
<source>hip_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Lingkar Pinggul</translation>
</message>
<message>
<source>upper_front_chest_width</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Lebar dada depan atas</translation>
</message>
<message>
<source>front_chest_width</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation>Lebar dada depan</translation>
</message>
<message>
<source>across_front_shoulder_width</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>across_back_shoulder_width</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>upper_back_width</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_width</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>bustpoint_to_bustpoint</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>halter_bustpoint_to_bustpoint</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>neck_to_bustpoint</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>crotch_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>rise_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>shoulder_drop</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>shoulder_slope_degrees</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_shoulder_slope_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_shoulder_slope_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_shoulder_to_waist_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_shoulder_to_waist_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_neck_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_neck_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_upper_chest_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_upper_chest_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_waist_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_waist_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_upper_hip_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_upper_hip_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_hip_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_hip_arc</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>chest_slope</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_slope</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_waist_slope</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_waist_slope</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_neck_to_upper_chest_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_neck_to_bust_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_waist_to_upper_chest</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_waist_to_lower_breast</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>back_waist_to_upper_chest</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>strap_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>armscye_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>elbow_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>upper_arm_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>wrist_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>scye_depth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>shoulder_and_arm_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>underarm_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>cervicale_to_wrist_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>shoulder_to_elbow_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>arm_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>hand_width</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>hand_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>hand_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>thigh_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>mid_thigh_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>knee_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>calf_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>ankle_girth</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>knee_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>ankle_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>foot_width</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>foot_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>cervicale_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>cervicale_to_knee_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>waist_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>high_hip_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>hip_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>waist_to_hip_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>waist_to_knee_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>crotch_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>size</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height_front_neck_base_point</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height_base_neck_side_point</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height_shoulder_point</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height_nipple_point</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height_back_angle_axilla</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height_scapular_point</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height_under_buttock_folds</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>hips_excluding_protruding_abdomen</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>girth_foot_instep</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>side_waist_to_floor</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_waist_to_floor</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>arc_through_groin_area</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>waist_to_plane_seat</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>neck_to_radial_point</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>neck_to_third_finger</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>neck_to_first_line_chest_circumference</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_waist_length</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>arc_through_shoulder_joint</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>neck_to_back_line_chest_circumference</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>waist_to_neck_side</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>arc_length_upper_body</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>chest_width</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>anteroposterior_diameter_hands</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height_clavicular_point</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>height_armhole_slash</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>slash_shoulder_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>half_girth_neck</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>half_girth_neck_for_shirts</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>half_girth_chest_first</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>half_girth_chest_second</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>half_girth_chest_third</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>half_girth_waist</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>half_girth_hips_considering_protruding_abdomen</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>half_girth_hips_excluding_protruding_abdomen</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>girth_knee_flexed_feet</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>neck_transverse_diameter</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>front_slash_shoulder_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>neck_to_front_waist_line</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>hand_vertical_diameter</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>neck_to_knee_point</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>waist_to_knee</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>shoulder_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>head_height</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>body_position</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>arc_behind_shoulder_girdle</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>neck_to_neck_base</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>depth_waist_first</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>depth_waist_second</source>
<comment>Short measurement name. Don&apos;t use math symbols in name!!!!</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MeasurementsDescriptions</name>
<message>
<source>Around fullest part of Head</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around middle part of Neck</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Neck at base</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Vertical Distance from Crown to Nape</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Neck Center over tape at Bustline to Front Waist Center</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Neck Center to Back Waist Center</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint to ShoulderTip</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Armpit to Waist side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Body from middle of Shoulder length to BustPoint to Crotch up back to beginning point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Arms and Torso, at bicep level parallel to floor, with arms hanging at the sides</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Chest at Armfold level, will be parallel to floor across back, will not be parallel to floor across front chest</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around fullest part of Bust, parallel to floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Chest below the Bust, parallel to floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tie a string around smallest part of waist, keep string tied while taking meaasurements. Not usually parallel to floor for front waist or back waist.</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around HighHip, parallel to floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Hip, parallel to floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Across Front UpperChest, smallest width from armscye to armscye</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Across Front Chest, from armfold to armfold</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>From ShoulderTip to ShoulderTip, across Front</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>From ShoulderTip to ShoulderTip, across Back</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Across Back UpperChest, smallest width from armscye to armscye</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Across Back Chest, from armfold to armfold</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance between BustPoints, across Chest</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance from Bustpoint, behind neck, down to Bustpoint</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>From NeckPoint to BustPoint</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>From Front Waist Center, down to crotch, up to Back Waist Center</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Sit on hard chair, measure from side waist straight down to chair bottom</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Vertical Distance from NeckPoint level to ShoulderTip level</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Degrees of angle from NeckPoint to ShoulderTip requires goniometer</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>ShoulderTip to Front Waist Center</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>ShoulderTip to Back Waist Center</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint straight down front chest to Waistline</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back NeckPoint straight down back chest to Waistline</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint to NeckPoint through Front Neck Center</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint to NeckPoint across Nape</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front upper-bust arc</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back UpperBust side to side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Waist side to side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Waist side to side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front UpperHip side to side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back UpperHip side to side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Hip side to side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Hip side to side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint to Front ArmfoldPoint</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint to Back ArmfoldPoint</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint across Front Chest to Waist side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint across Back Chest to Waist side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Neck Center straight down to UpperChest line</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Neck Center straight down to Bust line</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Upper chest waist</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front waist to lower breast</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back waist to upper chest</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Strap length</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Armscye</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Elbow with elbow bent</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around UpperArm</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Wrist</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nape straight down to UnderBust line (same as Back UpperBust height)</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint to ShoulderTip to Wrist, with elbow bent and hand on hip</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Armpit to Wrist, with arm straight and hanging at side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nape to Wrist, with elbow bent and hand on hip</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>ShoulderTip to Elbow, with elbow bent and hand on hip</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>ShoulderTip to Wrist, with elbow bent and hand on hip</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hand side to side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hand Middle Finger tip to wrist</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Hand</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Thigh</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around MidThigh</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Knee</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Calf</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Around Ankle</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Knee to Floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ankle to Floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Widest part of Foot side to side</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tip of Longest Toe straight to back of heel</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Top of head to floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nape to Floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nape to Knee</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist side to floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>HighHip side to Floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hip side to Floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist side to Hip</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist side to Knee</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Crotch to Floor along inside leg</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height of the point base of the neck in front</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height of the base of the neck side point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The height of the shoulder point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height nipple point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height back angle axilla</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height scapular point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height under buttock folds</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hips excluding protruding abdomen</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Girth foot instep</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the side waist to floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the front waist to floor</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc through groin area</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the waist to the plane seat</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the base of the neck to the side of the radial point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance from the base of the neck side point to the end of the third finger</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the base of the neck to the side of the first line in front of chest circumference</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the base of the neck to the waist side front (waist length in the front)</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc through the highest point of the shoulder joint</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the base of the neck to the back line of chest circumference of the first and the second based on ledge vanes</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the waist to the back base of the neck side point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc length of the upper body through the base of the neck side point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Chest width</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Anteroposterior diameter of the hands</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height clavicular point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the point to the cervical level of the posterior angle of the front armpit (underarm height oblique)</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Slash shoulder height</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth neck</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth neck for shirts</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth chest first</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth chest second</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth chest third</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth waist</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth hips considering protruding abdomen</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth hips excluding protruding abdomen</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Girth knee flexed feet</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck transverse diameter</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front slash shoulder height</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the base of the neck to the waist line front</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hand vertical diameter</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance from neck to knee point</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The distance from the waist to the knee</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shoulder height</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Head height</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Body position</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc behind the shoulder girdle</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Distance from neck point to point on the base of the neck side neck girth measurement line</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Depth waist first</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Depth waist second</source>
<comment>Full measurement description</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MeasurementsFullNames</name>
<message>
<source>Head girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Mid-neck girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck Base girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Head and Neck length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Center length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Center length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shoulder length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Side Waist length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Trunk length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shoulder girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Upper Chest girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bust girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Under Bust girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>HighHip girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hip girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Upper Chest width</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Chest width</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Across Shoulder width</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Across Shoulder width</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Upper Chest width</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Chest width</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>BustPoint to BustPoint</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Halter Bustpoint to Bustpoint</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>NeckPoint to BustPoint</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Crotch length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Rise height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shoulder Drop</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shoulder Slope degrees</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Shoulder Balance</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Shoulder Balance</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Full Length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Full Length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Neck arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Neck arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front upper-bust arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back UpperBust arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Waist arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Waist arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front UpperHip arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back UpperHip arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Hip arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Hip arc</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Chest Balance</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Balance</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Waist Balance</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back Waist Balance</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front UpperChest height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Bust height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front Upper chest waist</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front waist to lower breast</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Back waist to upper chest</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Strap length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Armscye Girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Elbow Girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Upperarm Girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wrist girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Armscye depth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shoulder and Arm length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Underarm length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nape to wrist length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Elbow length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arm length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hand width</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hand length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hand girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Thigh girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Midthigh girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Knee girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Calf girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ankle girth</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Knee height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Ankle height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Foot width</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Foot length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Total Height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nape height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Nape to knee height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>HighHip height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hip height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist to Hip height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist to Knee height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Crotch height/Inseam</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Size</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height front neck base point</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height base neck side point</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height shoulder point</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height nipple point</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height back angle axilla</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height scapular point</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height under buttock folds</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hips excluding protruding abdomen</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Girth foot instep</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Side waist to floor</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front waist to floor</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc through groin area</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist to plane seat</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck to radial point</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck to third finger</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck to first line chest circumference</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front waist length</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc through shoulder joint</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck to back line chest circumference</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist to neck side</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc length upper body</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Chest width</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Anteroposterior diameter hands</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height clavicular point</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Height armhole slash</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Slash shoulder height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth neck</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth neck for shirts</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth chest first</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth chest second</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth chest third</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth waist</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth hips considering protruding abdomen</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Half girth hips excluding protruding abdomen</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Girth knee flexed feet</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck transverse diameter</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Front slash shoulder height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck to front waist line</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Hand vertical diameter</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck to knee point</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Waist to knee</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Shoulder height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Head height</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Body position</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc behind shoulder girdle</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Neck to neck base</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Depth waist first</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Depth waist second</source>
<comment>Full measurement name</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MoveLabel</name>
<message>
<source>Move point label</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MoveSPoint</name>
<message>
<source>Move single point</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MoveSpline</name>
<message>
<source>Move spline</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MoveSplinePath</name>
<message>
<source>Move spline path</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PathPage</name>
<message>
<source>Open Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path that use Valentina</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Default</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Edit</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Individual measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Patterns</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Standard measurements</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Layout</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PatternPage</name>
<message>
<source>User</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>User name</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Graphical output</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Use antialiasing</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Undo</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Count steps (0 - no limit)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>PostfixOperators</name>
<message>
<source>cm</source>
<comment>centimeter</comment>
<translation type="unfinished">cm</translation>
</message>
<message>
<source>mm</source>
<comment>millimeter</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>in</source>
<comment>inch</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QCoreApplication</name>
<message>
<source>Based on Qt %1 (%2, %3 bit)</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QObject</name>
<message>
<source>Create new pattern piece to start working.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Add node</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Move detail</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>mm</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>cm</source>
<translation type="unfinished">cm</translation>
</message>
<message>
<source>inch</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Property</source>
<extracomment>The text that appears in the first column header</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Value</source>
<extracomment>The text that appears in the second column header</extracomment>
<translation type="unfinished"></translation>
</message>
<message>
<source>px</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QmuParserErrorMsg</name>
<message>
<source>Unexpected token &quot;$TOK$&quot; found at position $POS$.</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot; and $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Internal error</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid function-, variable- or constant name: &quot;$TOK$&quot;.</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot;</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid binary operator identifier: &quot;$TOK$&quot;.</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot;</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid infix operator identifier: &quot;$TOK$&quot;.</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot;</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid postfix operator identifier: &quot;$TOK$&quot;.</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot;</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid pointer to callback function.</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Expression is empty.</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid pointer to variable.</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unexpected operator &quot;$TOK$&quot; found at position $POS$</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot; and $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unexpected end of expression at position $POS$</source>
<comment>Math parser error messages. Left untouched $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unexpected argument separator at position $POS$</source>
<comment>Math parser error messages. Left untouched $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unexpected parenthesis &quot;$TOK$&quot; at position $POS$</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot; and $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unexpected function &quot;$TOK$&quot; at position $POS$</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot; and $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unexpected value &quot;$TOK$&quot; found at position $POS$</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot; and $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unexpected variable &quot;$TOK$&quot; found at position $POS$</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot; and $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Function arguments used without a function (position: $POS$)</source>
<comment>Math parser error messages. Left untouched $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Missing parenthesis</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Too many parameters for function &quot;$TOK$&quot; at expression position $POS$</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot; and $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Too few parameters for function &quot;$TOK$&quot; at expression position $POS$</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot; and $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Divide by zero</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Domain error</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Name conflict</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid value for operator priority (must be greater or equal to zero).</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>user defined binary operator &quot;$TOK$&quot; conflicts with a built in operator.</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot;</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unexpected string token found at position $POS$.</source>
<comment>Math parser error messages. Left untouched $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unterminated string starting at position $POS$.</source>
<comment>Math parser error messages. Left untouched $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>String function called with a non string type of argument.</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>String value used where a numerical argument is expected.</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>No suitable overload for operator &quot;$TOK$&quot; at position $POS$.</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot; and $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Function result is a string.</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Parser error.</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Decimal separator is identic to function argument separator.</source>
<comment>Math parser error messages.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>If-then-else operator is missing an else clause</source>
<comment>Math parser error messages. Do not translate operator name.</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Misplaced colon at position $POS$</source>
<comment>Math parser error messages. Left untouched $POS$</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>The &quot;$TOK$&quot; operator must be preceeded by a closing bracket.</source>
<comment>Math parser error messages. Left untouched &quot;$TOK$&quot;</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>RenamePP</name>
<message>
<source>Rename pattern piece</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>STDescriptions</name>
<message>
<source>Standard figures of men 1st group, chest 100 cm</source>
<comment>Standard table description</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>SaveDetailOptions</name>
<message>
<source>Save detail option</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>SaveToolOptions</name>
<message>
<source>Save tool option</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>TableWindow</name>
<message>
<source>Create a layout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>toolBar</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Save</source>
<translation type="unfinished">Simpan</translation>
</message>
<message>
<source>Save layout</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Stop</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Stop laying</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Zoom In</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Zoom Out</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>untitled</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Svg files (*.svg)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PDF files (*.pdf)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Images (*.png)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>PS files (*.ps)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>EPS files (*.eps)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Creating file &apos;%1&apos; failed! %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Critical error!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Wavefront OBJ (*.obj)</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Layout pages</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Layout</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Utils::CheckableMessageBox</name>
<message>
<source>Do not ask again</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do not &amp;ask again</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do not &amp;show again</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VAbstractConverter</name>
<message>
<source>Error creation backup file: %1.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Couldn&apos;t get version information.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Too many tags &lt;%1&gt; in file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Version &quot;%1&quot; invalid.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Version &quot;0.0.0&quot; invalid.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid version. Minimum supported version is %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid version. Maximum supported version is %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error no unique id.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not change version.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VAbstractTool</name>
<message>
<source>black</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>green</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>blue</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>dark red</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>dark green</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>dark blue</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>yellow</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Confirm deletion</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Do you really want to delete?</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VApplication</name>
<message>
<source>Error parsing file. Program will be terminated.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error bad id. Program will be terminated.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error can&apos;t convert value. Program will be terminated.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error empty parameter. Program will be terminated.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error wrong id. Program will be terminated.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Something&apos;s wrong!!</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VContainer</name>
<message>
<source>Can&apos;t find object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t cast object</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t find object. Type mismatch.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VDomDocument</name>
<message>
<source>Can&apos;t convert toUInt parameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t convert toBool parameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Got empty parameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t convert toDouble parameter</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t open file %1:
%2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t open schema file %1:
%2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not load schema file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Validation error file %3 in line %1 column %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Parsing error file %3 in line %1 column %2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Couldn&apos;t get node</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Got wrong parameter id. Need only id &gt; 0.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This id is not unique.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not copy temp file to document file</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not remove document file</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VDrawTool</name>
<message>
<source>Edit wrong formula</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Options</source>
<translation type="unfinished">pilihan</translation>
</message>
<message>
<source>Delete</source>
<translation type="unfinished">hapus</translation>
</message>
</context>
<context>
<name>VException</name>
<message>
<source>Critical error!</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VFormula</name>
<message>
<source>Error</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VFormulaProperty</name>
<message>
<source>Value</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Formula</source>
<translation type="unfinished">rumus</translation>
</message>
</context>
<context>
<name>VPE::VBoolProperty</name>
<message>
<source>True</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>False</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPE::VFileEditWidget</name>
<message>
<source>Directory</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Open File</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPattern</name>
<message>
<source>Can&apos;t find tool in table.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error no unique id.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error parsing file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error can&apos;t convert value.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error empty parameter.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error wrong id.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Critical error!</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error parsing file (std::bad_alloc).</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating detail</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating single point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point of end line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point along line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point of shoulder</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point of normal</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point of bisector</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point of lineintersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point of contact</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating modeling point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating height</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating triangle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating cut spline point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating cut spline path point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating cut arc point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point of intersection line and axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating point of intersection curve and axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating simple curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating curve path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating modeling simple curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating modeling curve path</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating simple arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating modeling arc</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error creating or updating union details</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>File error.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPatternConverter</name>
<message>
<source>Unexpected version &quot;%1&quot;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Error restoring backup file: %1.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VSplinePath</name>
<message>
<source>Not enough points to create the spline.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>This spline does not exist.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t cut spline path with one point</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VTableGraphicsView</name>
<message>
<source>can&apos;t find detail</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>detail found</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolDetail</name>
<message>
<source>Options</source>
<translation type="unfinished">pilihan</translation>
</message>
<message>
<source>Delete</source>
<translation type="unfinished">hapus</translation>
</message>
</context>
<context>
<name>VToolOptionsPropertyBrowser</name>
<message>
<source>Base point</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point label</source>
<translation type="unfinished">label titik</translation>
</message>
<message>
<source>Position</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point at distance and angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line type</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">panjang</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">sudut</translation>
</message>
<message>
<source>Point at distance along line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc</source>
<translation type="unfinished">busur</translation>
</message>
<message>
<source>Radius</source>
<translation type="unfinished">radius
</translation>
</message>
<message>
<source>First angle</source>
<translation type="unfinished">sudut pertama</translation>
</message>
<message>
<source>Second angle</source>
<translation type="unfinished">sudut kedua</translation>
</message>
<message>
<source>Point along bisector</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Cut arc tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tool for segmenting a curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tool segment a pathed curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Perpendicular point along line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line between points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point at line intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point along perpendicular</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Additional angle degrees</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point at intersection of arc and line</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tool to make point from x &amp; y of two other points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Special point on shoulder</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve tool</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve factor</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tool for path curve</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Tool triangle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point intersection line and axis</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Line color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Color</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Point intersection curve and axis</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Variables</name>
<message>
<source>Line_</source>
<comment>Left symbol _ in name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>AngleLine_</source>
<comment>Left symbol _ in name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Arc_</source>
<comment>Left symbol _ in name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>Spl_</source>
<comment>Left symbol _ in name</comment>
<translation type="unfinished"></translation>
</message>
<message>
<source>SplPath</source>
<comment>Do not add symbol _ to the end of name</comment>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VisToolCurveIntersectAxis</name>
<message>
<source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VisToolEndLine</name>
<message>
<source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VisToolLineIntersectAxis</name>
<message>
<source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VisToolSplinePath</name>
<message>
<source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>main</name>
<message>
<source>Pattern making program.</source>
<translation>program pembuat pola</translation>
</message>
<message>
<source>Pattern file.</source>
<translation>Berkas pola.</translation>
</message>
</context>
</TS>