valentina_old/tools/vtooldetail.cpp
dismine 4552f887db Replaced Q_CHECK_PRT on Q_ASSERT.
--HG--
branch : develop
2013-10-14 17:44:33 +03:00

434 lines
17 KiB
C++

/****************************************************************************
**
** Copyright (C) 2013 Valentina project All Rights Reserved.
**
** This file is part of Valentina.
**
** Tox is free software: you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation, either version 3 of the License, or
** (at your option) any later version.
**
** Tox is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with Valentina. If not, see <http://www.gnu.org/licenses/>.
**
****************************************************************************/
#include "vtooldetail.h"
#include "nodeDetails/nodedetails.h"
#include <QDebug>
#include "modelingTools/vmodelingtool.h"
#include "modelingTools/modelingtools.h"
VToolDetail::VToolDetail(VDomDocument *doc, VContainer *data, const qint64 &id, Tool::Sources typeCreation,
VMainGraphicsScene *scene, QGraphicsItem *parent)
:VAbstractTool(doc, data, id), QGraphicsPathItem(parent), dialogDetail(QSharedPointer<DialogDetail>()),
sceneDetails(scene){
VDetail detail = data->GetDetail(id);
QHash<qint64, VDataTool*>* tools = doc->getTools();
Q_ASSERT(tools != 0);
for(qint32 i = 0; i< detail.CountNode(); ++i){
switch(detail[i].getTypeTool()){
case(Tool::NodePoint):{
VNodePoint *point = qobject_cast<VNodePoint*>(tools->value(detail[i].getId()));
Q_ASSERT(point != 0);
connect(point, &VNodePoint::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
point->setParentItem(this);
break;
}
case(Tool::NodeArc):{
VNodeArc *arc = qobject_cast<VNodeArc*>(tools->value(detail[i].getId()));
Q_ASSERT(arc != 0);
connect(arc, &VNodeArc::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
arc->setParentItem(this);
break;
}
case(Tool::NodeSpline):{
VNodeSpline *spl = qobject_cast<VNodeSpline*>(tools->value(detail[i].getId()));
Q_ASSERT(spl != 0);
connect(spl, &VNodeSpline::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
spl->setParentItem(this);
break;
}
case(Tool::NodeSplinePath):{
VNodeSplinePath *splPath = qobject_cast<VNodeSplinePath*>(tools->value(detail[i].getId()));
Q_ASSERT(splPath != 0);
connect(splPath, &VNodeSplinePath::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
splPath->setParentItem(this);
break;
}
case(Tool::AlongLineTool):{
VModelingAlongLine *tool = qobject_cast<VModelingAlongLine*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingAlongLine::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingAlongLine::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::ArcTool):{
VModelingArc *tool = qobject_cast<VModelingArc*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingArc::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingArc::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::BisectorTool):{
VModelingBisector *tool = qobject_cast<VModelingBisector*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingBisector::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingBisector::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::EndLineTool):{
VModelingEndLine *tool = qobject_cast<VModelingEndLine*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingEndLine::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingEndLine::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::LineIntersectTool):{
VModelingLineIntersect *tool = qobject_cast<VModelingLineIntersect*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingLineIntersect::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingLineIntersect::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::LineTool):{
VModelingLine *tool = qobject_cast<VModelingLine*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingLine::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingLine::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::NormalTool):{
VModelingNormal *tool = qobject_cast<VModelingNormal*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingNormal::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingNormal::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::PointOfContact):{
VModelingPointOfContact *tool = qobject_cast<VModelingPointOfContact*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingPointOfContact::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingPointOfContact::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::ShoulderPointTool):{
VModelingShoulderPoint *tool = qobject_cast<VModelingShoulderPoint*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingShoulderPoint::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingShoulderPoint::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::SplinePathTool):{
VModelingSplinePath *tool = qobject_cast<VModelingSplinePath*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingSplinePath::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingSplinePath::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
case(Tool::SplineTool):{
VModelingSpline *tool = qobject_cast<VModelingSpline*>(tools->value(detail[i].getId()));
Q_ASSERT(tool != 0);
connect(tool, &VModelingSpline::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(tool, &VModelingSpline::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
tool->setParentItem(this);
break;
}
default:
qWarning()<<"Get wrong tool type. Ignore.";
break;
}
doc->IncrementReferens(detail[i].getId());
}
this->setFlag(QGraphicsItem::ItemIsMovable, true);
this->setFlag(QGraphicsItem::ItemIsSelectable, true);
RefreshGeometry();
this->setPos(detail.getMx(), detail.getMy());
this->setFlag(QGraphicsItem::ItemSendsGeometryChanges, true);
if(typeCreation == Tool::FromGui){
AddToFile();
}
}
void VToolDetail::setDialog(){
Q_ASSERT(!dialogDetail.isNull());
if(!dialogDetail.isNull()){
VDetail detail = VAbstractTool::data.GetDetail(id);
dialogDetail->setDetails(detail);
}
}
void VToolDetail::Create(QSharedPointer<DialogDetail> &dialog, VMainGraphicsScene *scene,
VDomDocument *doc, VContainer *data){
VDetail detail = dialog->getDetails();
VDetail det;
for(qint32 i = 0; i< detail.CountNode(); ++i){
qint64 id = 0;
switch(detail[i].getTypeTool()){
case(Tool::NodePoint):{
VPointF point;
if(detail[i].getMode() == Draw::Calculation){
point = data->GetPoint(detail[i].getId());
} else {
point = data->GetModelingPoint(detail[i].getId());
}
id = data->AddModelingPoint(point);
VNodePoint::Create(doc, data, id, detail[i].getId(), detail[i].getMode(),
Document::FullParse, Tool::FromGui);
}
break;
case(Tool::NodeArc):{
VArc arc;
if(detail[i].getMode() == Draw::Calculation){
arc = data->GetArc(detail[i].getId());
} else {
arc = data->GetModelingArc(detail[i].getId());
}
id = data->AddModelingArc(arc);
VNodeArc::Create(doc, data, id, detail[i].getId(), detail[i].getMode(),
Document::FullParse, Tool::FromGui);
}
break;
case(Tool::NodeSpline):{
VSpline spline;
if(detail[i].getMode() == Draw::Calculation){
spline = data->GetSpline(detail[i].getId());
} else {
spline = data->GetModelingSpline(detail[i].getId());
}
id = data->AddModelingSpline(spline);
VNodeSpline::Create(doc, data, id, detail[i].getId(), detail[i].getMode(),
Document::FullParse, Tool::FromGui);
}
break;
case(Tool::NodeSplinePath):{
VSplinePath splinePath;
if(detail[i].getMode() == Draw::Calculation){
splinePath = data->GetSplinePath(detail[i].getId());
} else {
splinePath = data->GetModelingSplinePath(detail[i].getId());
}
id = data->AddModelingSplinePath(splinePath);
VNodeSplinePath::Create(doc, data, id, detail[i].getId(), detail[i].getMode(),
Document::FullParse, Tool::FromGui);
}
break;
default:
qWarning()<<"May be wrong tool type!!! Ignoring."<<Q_FUNC_INFO;
break;
}
VNodeDetail node(id, detail[i].getTypeTool(), detail[i].getMode(), NodeDetail::Contour);
det.append(node);
}
det.setName(detail.getName());
Create(0, det, scene, doc, data, Document::FullParse, Tool::FromGui);
}
void VToolDetail::Create(const qint64 _id, VDetail &newDetail, VMainGraphicsScene *scene, VDomDocument *doc,
VContainer *data, const Document::Documents &parse, Tool::Sources typeCreation){
qint64 id = _id;
if(typeCreation == Tool::FromGui){
id = data->AddDetail(newDetail);
} else {
data->UpdateDetail(id, newDetail);
if(parse != Document::FullParse){
doc->UpdateToolData(id, data);
}
}
if(parse == Document::FullParse){
VToolDetail *detail = new VToolDetail(doc, data, id, typeCreation, scene);
scene->addItem(detail);
connect(detail, &VToolDetail::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
connect(detail, &VToolDetail::RemoveTool, scene, &VMainGraphicsScene::RemoveTool);
QHash<qint64, VDataTool*>* tools = doc->getTools();
tools->insert(id, detail);
}
}
void VToolDetail::FullUpdateFromFile(){
RefreshGeometry();
}
void VToolDetail::FullUpdateFromGui(int result){
Q_UNUSED(result);
}
void VToolDetail::AddToFile(){
VDetail detail = VAbstractTool::data.GetDetail(id);
QDomElement domElement = doc->createElement("detail");
AddAttribute(domElement, "id", id);
AddAttribute(domElement, "name", detail.getName());
AddAttribute(domElement, "mx", detail.getMx());
AddAttribute(domElement, "my", detail.getMy());
for(qint32 i = 0; i < detail.CountNode(); ++i){
AddNode(domElement, detail[i]);
}
QDomElement element;
bool ok = doc->GetActivDetailsElement(element);
if(ok){
element.appendChild(domElement);
}
}
QVariant VToolDetail::itemChange(QGraphicsItem::GraphicsItemChange change, const QVariant &value){
if (change == ItemPositionHasChanged && scene()) {
// value - это новое положение.
QPointF newPos = value.toPointF();
//qDebug()<<newPos;
QDomElement domElement = doc->elementById(QString().setNum(id));
if(domElement.isElement()){
domElement.setAttribute("mx", QString().setNum(toMM(newPos.x())));
domElement.setAttribute("my", QString().setNum(toMM(newPos.y())));
//I don't now why but signal does not work.
doc->FullUpdateTree();
}
}
return QGraphicsItem::itemChange(change, value);
}
void VToolDetail::mouseReleaseEvent(QGraphicsSceneMouseEvent *event){
if(event->button() == Qt::LeftButton){
emit ChoosedTool(id, Scene::Detail);
}
QGraphicsItem::mouseReleaseEvent(event);
}
void VToolDetail::contextMenuEvent(QGraphicsSceneContextMenuEvent *event){
QMenu menu;
//QAction *actionOption = menu.addAction(tr("Options"));
QAction *actionRemove = menu.addAction(tr("Delete"));
if(_referens > 1){
actionRemove->setEnabled(false);
} else {
actionRemove->setEnabled(true);
}
QAction *selectedAction = menu.exec(event->screenPos());
// if(selectedAction == actionOption){
// dialog = QSharedPointer<Dialog>(new Dialog(getData()));
// connect(qobject_cast< VMainGraphicsScene * >(tool->scene()), &VMainGraphicsScene::ChoosedObject,
// dialog.data(), &Dialog::ChoosedObject);
// connect(dialog.data(), &Dialog::DialogClosed, tool,
// &Tool::FullUpdateFromGui);
// connect(doc, &VDomDocument::FullUpdateFromFile, dialog.data(), &Dialog::UpdateList);
// tool->setDialog();
// dialog->show();
// }
if(selectedAction == actionRemove){
//remove form xml file
QDomElement domElement = doc->elementById(QString().setNum(id));
if(domElement.isElement()){
QDomNode element = domElement.parentNode();
if(!element.isNull()){
//deincrement referens
RemoveReferens();
element.removeChild(domElement);
//update xml file
emit FullUpdateTree();
//remove form scene
emit RemoveTool(this);
} else {
qWarning()<<"parentNode isNull"<<Q_FUNC_INFO;
}
} else {
qWarning()<<"Can't get element by id = "<<id<<Q_FUNC_INFO;
}
}
}
void VToolDetail::RemoveReferens(){
VDetail detail = VAbstractTool::data.GetDetail(id);
for(qint32 i = 0; i< detail.CountNode(); ++i){
doc->DecrementReferens(detail[i].getId());
}
}
void VToolDetail::AddNode(QDomElement &domElement, VNodeDetail &node){
QDomElement nod = doc->createElement("node");
AddAttribute(nod, "idObject", node.getId());
if(node.getTypeNode() == NodeDetail::Contour){
AddAttribute(nod, "nodeType", "Contour");
} else {
AddAttribute(nod, "nodeType", "Modeling");
}
switch(node.getTypeTool()){
case(Tool::AlongLineTool):
AddAttribute(nod, "type", "AlongLineTool");
break;
case(Tool::ArcTool):
AddAttribute(nod, "type", "ArcTool");
break;
case(Tool::BisectorTool):
AddAttribute(nod, "type", "BisectorTool");
break;
case(Tool::EndLineTool):
AddAttribute(nod, "type", "EndLineTool");
break;
case(Tool::LineIntersectTool):
AddAttribute(nod, "type", "LineIntersectTool");
break;
case(Tool::LineTool):
AddAttribute(nod, "type", "LineTool");
break;
case(Tool::NodeArc):
AddAttribute(nod, "type", "NodeArc");
break;
case(Tool::NodePoint):
AddAttribute(nod, "type", "NodePoint");
break;
case(Tool::NodeSpline):
AddAttribute(nod, "type", "NodeSpline");
break;
case(Tool::NodeSplinePath):
AddAttribute(nod, "type", "NodeSplinePath");
break;
case(Tool::NormalTool):
AddAttribute(nod, "type", "NormalTool");
break;
case(Tool::PointOfContact):
AddAttribute(nod, "type", "PointOfContact");
break;
case(Tool::ShoulderPointTool):
AddAttribute(nod, "type", "ShoulderPointTool");
break;
case(Tool::SplinePathTool):
AddAttribute(nod, "type", "SplinePathTool");
break;
case(Tool::SplineTool):
AddAttribute(nod, "type", "SplineTool");
break;
default:
qWarning()<<"May be wrong tool type!!! Ignoring."<<Q_FUNC_INFO;
break;
}
domElement.appendChild(nod);
}
void VToolDetail::RefreshGeometry(){
QPainterPath path = VAbstractTool::data.ContourPath(id);
this->setPath(path);
}