diff --git a/share/translations/valentina.ts b/share/translations/valentina.ts index e65ecd845..df24f2192 100644 --- a/share/translations/valentina.ts +++ b/share/translations/valentina.ts @@ -4421,21 +4421,17 @@ Apply settings anyway? Seam allowance tool Seam allowance tool - - Main path - - All objects in path should follow in clockwise direction. - All objects in path should follow in clockwise direction. + All objects in path should follow in clockwise direction. Forbid piece be mirrored in a layout. - Forbid piece be mirrored in a layout. + Forbid piece be mirrored in a layout. Forbid flipping - Forbid flipping + Forbid flipping Ready! @@ -4443,19 +4439,15 @@ Apply settings anyway? Seam allowance - Seam allowance - - - Automatic - + Seam allowance Width: - Width: + Width: Formula wizard - Formula wizard + Formula wizard Value @@ -4463,59 +4455,23 @@ Apply settings anyway? Calculation - Calculation + Calculation <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - + <html><head/><body><p>Show full calculation in message box</p></body></html> Default - Default - - - After: - + Default Angle: - Angle: + Angle: Custom - Custom - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - + Custom Pattern piece data @@ -4523,43 +4479,43 @@ Apply settings anyway? Letter: - Letter: + Letter: Letter of pattern piece - Letter of pattern piece + Letter of pattern piece Name of detail: - Name of detail: + Name of detail: Detail - Detail + Detail Name can't be empty - Name can't be empty + Name can't be empty Material/Cut number/Placement - Material/Cut number/Placement + Material/Cut number/Placement Cut number: - Cut number: + Cut number: Material type: - Material type: + Material type: You can choose one of the predefined materials or enter a new one - You can choose one of the predefined materials or enter a new one + You can choose one of the predefined materials or enter a new one Placement: - Placement: + Placement: Add @@ -4567,19 +4523,19 @@ Apply settings anyway? Cancel - Cancel + Cancel Remove - Remove + Remove Detail label visible - Detail label visible + Detail label visible Pattern label visible - Pattern label visible + Pattern label visible Grainline @@ -4587,19 +4543,19 @@ Apply settings anyway? Grainline visible - Grainline visible + Grainline visible Rotation: - Rotation: + Rotation: Length: - Length: + Length: Arrows: - Arrows: + Arrows: Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4709,22 +4665,6 @@ Apply settings anyway? Just rear Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4733,21 +4673,13 @@ Apply settings anyway? no pin - - Piece label data - - Labels Height: - Height: - - - Center pin: - + Height: Error @@ -4769,6 +4701,10 @@ Apply settings anyway? Edit width + + Paths + Paths + DialogShoulderPoint @@ -8134,6 +8070,282 @@ Do you want to save your changes? + + TabGrainline + + Form + Form + + + Grainline visible + Grainline visible + + + Rotation: + Rotation: + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Length: + Length: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + Arrows: + + + + TabLabels + + Form + Form + + + Piece label data + + + + Letter: + Letter: + + + Letter of pattern piece + Letter of pattern piece + + + Name of detail: + Name of detail: + + + Detail + Detail + + + Name can't be empty + Name can't be empty + + + Material/Cut number/Placement + Material/Cut number/Placement + + + Cut number: + Cut number: + + + Material type: + Material type: + + + You can choose one of the predefined materials or enter a new one + You can choose one of the predefined materials or enter a new one + + + Placement: + Placement: + + + Add + Add + + + Cancel + Cancel + + + Remove + Remove + + + Labels + + + + Detail label visible + Detail label visible + + + Width: + Width: + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Height: + Height: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Angle: + + + Pattern label visible + Pattern label visible + + + + TabPaths + + Form + Form + + + Main path + + + + All objects in path should follow in clockwise direction. + All objects in path should follow in clockwise direction. + + + Forbid piece be mirrored in a layout. + Forbid piece be mirrored in a layout. + + + Forbid flipping + Forbid flipping + + + Ready! + Ready! + + + Seam allowance + Seam allowance + + + Automatic + + + + Width: + Width: + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + Default + + + After: + + + + Angle: + Angle: + + + Custom + Custom + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + Form + + TapeConfigDialog diff --git a/share/translations/valentina_cs_CZ.ts b/share/translations/valentina_cs_CZ.ts index de9630491..776810b01 100644 --- a/share/translations/valentina_cs_CZ.ts +++ b/share/translations/valentina_cs_CZ.ts @@ -4014,182 +4014,22 @@ Apply settings anyway? Seam allowance tool Nástroj pro stanovení přídavku na švy - - Main path - - - - All objects in path should follow in clockwise direction. - - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! - - Seam allowance - Přídavek na šev - - - Automatic - - - - Width: - Šířka: - - - Formula wizard - - Value Hodnota - - Calculation - - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p>Ukázat celý výpočet v okně se zprávami</p></body></html> - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - Výchozí - - - After: - - - - Angle: - - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - - - - Letter of pattern piece - - - - Name of detail: - - - - Detail - Detail - - - Name can't be empty - - - - Material/Cut number/Placement - - - - Cut number: - - - - Material type: - - - - You can choose one of the predefined materials or enter a new one - - - - Placement: - - Add - - Cancel - Zrušit - - - Remove - - - - Detail label visible - - - - Pattern label visible - - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4298,22 +4138,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4322,22 +4146,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - Výška: - - - Center pin: - - Error Chyba @@ -4358,6 +4170,10 @@ Apply settings anyway? Edit width + + Paths + Cesty + DialogShoulderPoint @@ -7464,6 +7280,282 @@ Do you want to save your changes? + + TabGrainline + + Form + + + + Grainline visible + + + + Rotation: + + + + Formula wizard + + + + Value + Hodnota + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Ukázat celý výpočet v okně se zprávami</p></body></html> + + + Length: + + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + + + + Letter of pattern piece + + + + Name of detail: + + + + Detail + Detail + + + Name can't be empty + + + + Material/Cut number/Placement + + + + Cut number: + + + + Material type: + + + + You can choose one of the predefined materials or enter a new one + + + + Placement: + + + + Add + + + + Cancel + Zrušit + + + Remove + + + + Labels + + + + Detail label visible + + + + Width: + Šířka: + + + Formula wizard + + + + Value + Hodnota + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Ukázat celý výpočet v okně se zprávami</p></body></html> + + + Height: + Výška: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + + + + Pattern label visible + + + + + TabPaths + + Form + + + + Main path + + + + All objects in path should follow in clockwise direction. + + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + + + + Seam allowance + Přídavek na šev + + + Automatic + + + + Width: + Šířka: + + + Formula wizard + + + + Value + Hodnota + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Ukázat celý výpočet v okně se zprávami</p></body></html> + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + Výchozí + + + After: + + + + Angle: + + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + + + TapeConfigDialog diff --git a/share/translations/valentina_de_DE.ts b/share/translations/valentina_de_DE.ts index 34502c8b9..35828b4e7 100644 --- a/share/translations/valentina_de_DE.ts +++ b/share/translations/valentina_de_DE.ts @@ -4288,182 +4288,22 @@ Einstellungen trotzdem anwenden? Seam allowance tool Tool für die Nahtzugabe - - Main path - - - - All objects in path should follow in clockwise direction. - Alle Objekte im Pfad sollten im Uhrzeigersinn folgen. - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! Fertig! - - Seam allowance - Nahtzugaben - - - Automatic - - - - Width: - Breite: - - - Formula wizard - - Value Wert - - Calculation - Berechnung - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - Standard - - - After: - - - - Angle: - Winkel: - - - Custom - Benutzerdefiniert - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - - - - Letter of pattern piece - - - - Name of detail: - Name des Details: - - - Detail - Detail - - - Name can't be empty - - - - Material/Cut number/Placement - Material/Schnittnummer/Platzierung - - - Cut number: - Schnittnummer: - - - Material type: - Materialart: - - - You can choose one of the predefined materials or enter a new one - - - - Placement: - Platzierung: - Add Hinzufügen - - Cancel - Abbrechen - - - Remove - Entfernen - - - Detail label visible - - - - Pattern label visible - - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - Länge: - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4572,22 +4412,6 @@ Einstellungen trotzdem anwenden? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4596,22 +4420,10 @@ Einstellungen trotzdem anwenden? no pin - - Piece label data - - Labels - - Height: - Höhe: - - - Center pin: - - Error Fehler @@ -4632,6 +4444,10 @@ Einstellungen trotzdem anwenden? Edit width + + Paths + Verzeichnisse + DialogShoulderPoint @@ -7981,6 +7797,282 @@ Do you want to save your changes? + + TabGrainline + + Form + Form + + + Grainline visible + + + + Rotation: + + + + Formula wizard + + + + Value + Wert + + + Calculation + Berechnung + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + Länge: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + Form + + + Piece label data + + + + Letter: + + + + Letter of pattern piece + + + + Name of detail: + Name des Details: + + + Detail + Detail + + + Name can't be empty + + + + Material/Cut number/Placement + Material/Schnittnummer/Platzierung + + + Cut number: + Schnittnummer: + + + Material type: + Materialart: + + + You can choose one of the predefined materials or enter a new one + + + + Placement: + Platzierung: + + + Add + Hinzufügen + + + Cancel + Abbrechen + + + Remove + Entfernen + + + Labels + + + + Detail label visible + + + + Width: + Breite: + + + Formula wizard + + + + Value + Wert + + + Calculation + Berechnung + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + Höhe: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Winkel: + + + Pattern label visible + + + + + TabPaths + + Form + Form + + + Main path + + + + All objects in path should follow in clockwise direction. + Alle Objekte im Pfad sollten im Uhrzeigersinn folgen. + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + Fertig! + + + Seam allowance + Nahtzugaben + + + Automatic + + + + Width: + Breite: + + + Formula wizard + + + + Value + Wert + + + Calculation + Berechnung + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + Standard + + + After: + + + + Angle: + Winkel: + + + Custom + Benutzerdefiniert + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + Form + + TapeConfigDialog diff --git a/share/translations/valentina_el_GR.ts b/share/translations/valentina_el_GR.ts index b7abfeea2..5ace73c47 100644 --- a/share/translations/valentina_el_GR.ts +++ b/share/translations/valentina_el_GR.ts @@ -4272,141 +4272,33 @@ Apply settings anyway? Seam allowance tool Εργαλείο περιθωρίου ραφής - - Main path - - - - All objects in path should follow in clockwise direction. - - - - Forbid piece be mirrored in a layout. - Περιορισμός καθρεφτίσματος κομματιού στην τοποθέτηση. - - - Forbid flipping - Περιορισμός αντιστροφής - Ready! Έτοιμο! - - Seam allowance - Περιθώριο ραφής - - - Automatic - - - - Width: - Φάρδος: - - - Formula wizard - Βοηθός φόρμουλας - Value Τιμή Calculation - Υπολογισμός - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - + Υπολογισμός Nodes - Κόμβοι - - - Node: - - - - Before: - + Κόμβοι Return to default width - Επιστροφή στο προεπιλεγμένο πλάτος + Επιστροφή στο προεπιλεγμένο πλάτος Default - Προεπιλογή - - - After: - + Προεπιλογή Angle: - Γωνία: - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - Γράμμα: - - - Letter of pattern piece - - - - Name of detail: - Όνομα της λεπτομέρειας: - - - Detail - Λεπτομέρεια - - - Name can't be empty - - - - Material/Cut number/Placement - Ύφασμα/Ποσότητα κοπής/Τοποθέτηση - - - Cut number: - Ποσότητα κοπής: - - - Material type: - Τύπος υφάσματος: - - - You can choose one of the predefined materials or enter a new one - Μπορείτε να επιλέξετε ένα απο τα προκαθορισμένα υφάσματα ή να εισάγετε ένα νέο - - - Placement: - Τοποθέτηση: + Γωνία: Add @@ -4414,40 +4306,24 @@ Apply settings anyway? Cancel - Ακύρωση + Ακύρωση Remove - Αφαίρεση + Αφαίρεση Detail label visible - Εμφάνιση ετικέτας λεπτομέρειας + Εμφάνιση ετικέτας λεπτομέρειας Pattern label visible - Εμφάνιση ετικέτας πατρόν + Εμφάνιση ετικέτας πατρόν Grainline Ισιάδα - - Grainline visible - Εμφάνιση ισιάδας - - - Rotation: - Περιστροφή: - - - Length: - Μήκος: - - - Arrows: - Τόξα: - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4556,22 +4432,6 @@ Apply settings anyway? Just rear Μόνο πίσω - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4580,22 +4440,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - Ύψος: - - - Center pin: - - Error Σφάλμα @@ -4616,6 +4464,10 @@ Apply settings anyway? Edit width + + Paths + Διαδρομές + DialogShoulderPoint @@ -7895,6 +7747,282 @@ Do you want to save your changes? + + TabGrainline + + Form + + + + Grainline visible + Εμφάνιση ισιάδας + + + Rotation: + Περιστροφή: + + + Formula wizard + Βοηθός φόρμουλας + + + Value + Τιμή + + + Calculation + Υπολογισμός + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + Μήκος: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + Τόξα: + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + Γράμμα: + + + Letter of pattern piece + + + + Name of detail: + Όνομα της λεπτομέρειας: + + + Detail + Λεπτομέρεια + + + Name can't be empty + + + + Material/Cut number/Placement + Ύφασμα/Ποσότητα κοπής/Τοποθέτηση + + + Cut number: + Ποσότητα κοπής: + + + Material type: + Τύπος υφάσματος: + + + You can choose one of the predefined materials or enter a new one + Μπορείτε να επιλέξετε ένα απο τα προκαθορισμένα υφάσματα ή να εισάγετε ένα νέο + + + Placement: + Τοποθέτηση: + + + Add + Προσθήκη + + + Cancel + Ακύρωση + + + Remove + Αφαίρεση + + + Labels + + + + Detail label visible + Εμφάνιση ετικέτας λεπτομέρειας + + + Width: + Φάρδος: + + + Formula wizard + Βοηθός φόρμουλας + + + Value + Τιμή + + + Calculation + Υπολογισμός + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + Ύψος: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Γωνία: + + + Pattern label visible + Εμφάνιση ετικέτας πατρόν + + + + TabPaths + + Form + + + + Main path + + + + All objects in path should follow in clockwise direction. + + + + Forbid piece be mirrored in a layout. + Περιορισμός καθρεφτίσματος κομματιού στην τοποθέτηση. + + + Forbid flipping + Περιορισμός αντιστροφής + + + Ready! + Έτοιμο! + + + Seam allowance + Περιθώριο ραφής + + + Automatic + + + + Width: + Φάρδος: + + + Formula wizard + Βοηθός φόρμουλας + + + Value + Τιμή + + + Calculation + Υπολογισμός + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + Κόμβοι + + + Node: + + + + Before: + + + + Return to default width + Επιστροφή στο προεπιλεγμένο πλάτος + + + Default + Προεπιλογή + + + After: + + + + Angle: + Γωνία: + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + + + TapeConfigDialog diff --git a/share/translations/valentina_en_CA.ts b/share/translations/valentina_en_CA.ts index 6e9c38dcf..d5d0a9169 100644 --- a/share/translations/valentina_en_CA.ts +++ b/share/translations/valentina_en_CA.ts @@ -4349,182 +4349,22 @@ Apply settings anyway? Seam allowance tool Seam allowance tool - - Main path - - - - All objects in path should follow in clockwise direction. - All objects in path should follow in clockwise direction. - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! Ready! - - Seam allowance - Seam allowance - - - Automatic - - - - Width: - Width: - - - Formula wizard - Formula wizard - Value Value - - Calculation - Calculation - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - Default - - - After: - - - - Angle: - Angle: - - - Custom - Custom - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - Letter: - - - Letter of pattern piece - - - - Name of detail: - Name of detail: - - - Detail - Detail - - - Name can't be empty - - - - Material/Cut number/Placement - Material/Cut number/Placement - - - Cut number: - Cut number: - - - Material type: - Material type: - - - You can choose one of the predefined materials or enter a new one - You can choose one of the predefined materials or enter a new one - - - Placement: - Placement: - Add Add - - Cancel - Cancel - - - Remove - Remove - - - Detail label visible - Detail label visible - - - Pattern label visible - Pattern label visible - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - Length: - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4633,22 +4473,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4657,22 +4481,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - Height: - - - Center pin: - - Error Error @@ -4693,6 +4505,10 @@ Apply settings anyway? Edit width + + Paths + Paths + DialogShoulderPoint @@ -8054,6 +7870,282 @@ Do you want to save your changes? + + TabGrainline + + Form + Form + + + Grainline visible + + + + Rotation: + + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Length: + Length: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + Form + + + Piece label data + + + + Letter: + Letter: + + + Letter of pattern piece + + + + Name of detail: + Name of detail: + + + Detail + Detail + + + Name can't be empty + + + + Material/Cut number/Placement + Material/Cut number/Placement + + + Cut number: + Cut number: + + + Material type: + Material type: + + + You can choose one of the predefined materials or enter a new one + You can choose one of the predefined materials or enter a new one + + + Placement: + Placement: + + + Add + Add + + + Cancel + Cancel + + + Remove + Remove + + + Labels + + + + Detail label visible + Detail label visible + + + Width: + Width: + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Height: + Height: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Angle: + + + Pattern label visible + Pattern label visible + + + + TabPaths + + Form + Form + + + Main path + + + + All objects in path should follow in clockwise direction. + All objects in path should follow in clockwise direction. + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + Ready! + + + Seam allowance + Seam allowance + + + Automatic + + + + Width: + Width: + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + Default + + + After: + + + + Angle: + Angle: + + + Custom + Custom + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + Form + + TapeConfigDialog diff --git a/share/translations/valentina_en_IN.ts b/share/translations/valentina_en_IN.ts index 60fef7b1c..b1cd3ee36 100644 --- a/share/translations/valentina_en_IN.ts +++ b/share/translations/valentina_en_IN.ts @@ -4349,182 +4349,22 @@ Apply settings anyway? Seam allowance tool Seam allowance tool - - Main path - - - - All objects in path should follow in clockwise direction. - All objects in path should follow in clockwise direction. - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! Ready! - - Seam allowance - Seam allowance - - - Automatic - - - - Width: - Width: - - - Formula wizard - Formula wizard - Value Value - - Calculation - Calculation - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - Default - - - After: - - - - Angle: - Angle: - - - Custom - Custom - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - Letter: - - - Letter of pattern piece - - - - Name of detail: - Name of detail: - - - Detail - Detail - - - Name can't be empty - - - - Material/Cut number/Placement - Material/Cut number/Placement - - - Cut number: - Cut number: - - - Material type: - Material type: - - - You can choose one of the predefined materials or enter a new one - You can choose one of the predefined materials or enter a new one - - - Placement: - Placement: - Add Add - - Cancel - Cancel - - - Remove - Remove - - - Detail label visible - Detail label visible - - - Pattern label visible - Pattern label visible - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - Length: - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4633,22 +4473,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4657,22 +4481,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - Height: - - - Center pin: - - Error Error @@ -4693,6 +4505,10 @@ Apply settings anyway? Edit width + + Paths + Paths + DialogShoulderPoint @@ -8054,6 +7870,282 @@ Do you want to save your changes? + + TabGrainline + + Form + Form + + + Grainline visible + + + + Rotation: + + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Length: + Length: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + Form + + + Piece label data + + + + Letter: + Letter: + + + Letter of pattern piece + + + + Name of detail: + Name of detail: + + + Detail + Detail + + + Name can't be empty + + + + Material/Cut number/Placement + Material/Cut number/Placement + + + Cut number: + Cut number: + + + Material type: + Material type: + + + You can choose one of the predefined materials or enter a new one + You can choose one of the predefined materials or enter a new one + + + Placement: + Placement: + + + Add + Add + + + Cancel + Cancel + + + Remove + Remove + + + Labels + + + + Detail label visible + Detail label visible + + + Width: + Width: + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Height: + Height: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Angle: + + + Pattern label visible + Pattern label visible + + + + TabPaths + + Form + Form + + + Main path + + + + All objects in path should follow in clockwise direction. + All objects in path should follow in clockwise direction. + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + Ready! + + + Seam allowance + Seam allowance + + + Automatic + + + + Width: + Width: + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + Default + + + After: + + + + Angle: + Angle: + + + Custom + Custom + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + Form + + TapeConfigDialog diff --git a/share/translations/valentina_en_US.ts b/share/translations/valentina_en_US.ts index d013010a3..c2a36c63a 100644 --- a/share/translations/valentina_en_US.ts +++ b/share/translations/valentina_en_US.ts @@ -4349,182 +4349,22 @@ Apply settings anyway? Seam allowance tool Seam allowance tool - - Main path - - - - All objects in path should follow in clockwise direction. - All objects in path should follow in clockwise direction. - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! Ready! - - Seam allowance - Seam allowance - - - Automatic - - - - Width: - Width: - - - Formula wizard - Formula wizard - Value Value - - Calculation - Calculation - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - Default - - - After: - - - - Angle: - Angle: - - - Custom - Custom - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - Letter: - - - Letter of pattern piece - - - - Name of detail: - Name of detail: - - - Detail - Detail - - - Name can't be empty - - - - Material/Cut number/Placement - Material/Cut number/Placement - - - Cut number: - Cut number: - - - Material type: - Material type: - - - You can choose one of the predefined materials or enter a new one - You can choose one of the predefined materials or enter a new one - - - Placement: - Placement: - Add Add - - Cancel - Cancel - - - Remove - Remove - - - Detail label visible - Detail label visible - - - Pattern label visible - Pattern label visible - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - Length: - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4633,22 +4473,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4657,22 +4481,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - Height: - - - Center pin: - - Error Error @@ -4693,6 +4505,10 @@ Apply settings anyway? Edit width + + Paths + Paths + DialogShoulderPoint @@ -8054,6 +7870,282 @@ Do you want to save your changes? + + TabGrainline + + Form + Form + + + Grainline visible + + + + Rotation: + + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Length: + Length: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + Form + + + Piece label data + + + + Letter: + Letter: + + + Letter of pattern piece + + + + Name of detail: + Name of detail: + + + Detail + Detail + + + Name can't be empty + + + + Material/Cut number/Placement + Material/Cut number/Placement + + + Cut number: + Cut number: + + + Material type: + Material type: + + + You can choose one of the predefined materials or enter a new one + You can choose one of the predefined materials or enter a new one + + + Placement: + Placement: + + + Add + Add + + + Cancel + Cancel + + + Remove + Remove + + + Labels + + + + Detail label visible + Detail label visible + + + Width: + Width: + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Height: + Height: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Angle: + + + Pattern label visible + Pattern label visible + + + + TabPaths + + Form + Form + + + Main path + + + + All objects in path should follow in clockwise direction. + All objects in path should follow in clockwise direction. + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + Ready! + + + Seam allowance + Seam allowance + + + Automatic + + + + Width: + Width: + + + Formula wizard + Formula wizard + + + Value + Value + + + Calculation + Calculation + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + Default + + + After: + + + + Angle: + Angle: + + + Custom + Custom + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + Form + + TapeConfigDialog diff --git a/share/translations/valentina_es_ES.ts b/share/translations/valentina_es_ES.ts index 8815e8a88..fbb75b0f1 100644 --- a/share/translations/valentina_es_ES.ts +++ b/share/translations/valentina_es_ES.ts @@ -4423,19 +4423,19 @@ Apply settings anyway? Main path - Ruta principal + Ruta principal All objects in path should follow in clockwise direction. - Todos los objetos de la ruta deberían seguir en la dirección de las agujas del reloj. + Todos los objetos de la ruta deberían seguir en la dirección de las agujas del reloj. Forbid piece be mirrored in a layout. - Prohibir que el trozo sea reproducido en una capa. + Prohibir que el trozo sea reproducido en una capa. Forbid flipping - Prohibir girado + Prohibir girado Ready! @@ -4443,19 +4443,19 @@ Apply settings anyway? Seam allowance - Las costuras + Las costuras Automatic - Automático + Automático Width: - Anchura: + Anchura: Formula wizard - Asistente de Fórmula + Asistente de Fórmula Value @@ -4463,103 +4463,99 @@ Apply settings anyway? Calculation - Cálculo + Cálculo <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p>Muestra el cálculo completo en una caja de mensajes</p></body></html> + <html><head/><body><p>Muestra el cálculo completo en una caja de mensajes</p></body></html> Nodes - Nodos + Nodos Node: - Nodo: + Nodo: Before: - Antes: + Antes: Return to default width - Volver al ancho predeterminado + Volver al ancho predeterminado Default - Defecto + Defecto After: - Después: + Después: Angle: - Ángulo: + Ángulo: Custom - Personalizado + Personalizado Start point: - Punto de partida: + Punto de partida: End point: - Punto final: + Punto final: Include as: - Incluir como: + Incluir como: Internal paths - Rutas internas - - - Pattern piece data - Datos de pieza de patrón + Rutas internas Letter: - Letra: + Letra: Letter of pattern piece - Carta de trozo de estampado + Carta de trozo de estampado Name of detail: - Nombre del detalle: + Nombre del detalle: Detail - Detalle + Detalle Name can't be empty - El nombre no puede estar vacío + El nombre no puede estar vacío Material/Cut number/Placement - Material/Cortar número/Disposición + Material/Cortar número/Disposición Cut number: - Curtar número: + Curtar número: Material type: - Tipo de Material: + Tipo de Material: You can choose one of the predefined materials or enter a new one - Puede elegir uno de los materiales predefinidos o introducir uno nuevo + Puede elegir uno de los materiales predefinidos o introducir uno nuevo Placement: - Ubicación: + Ubicación: Add @@ -4567,19 +4563,19 @@ Apply settings anyway? Cancel - Cancelar + Cancelar Remove - Quitar + Quitar Detail label visible - Etiqueta de Detalle visible + Etiqueta de Detalle visible Pattern label visible - Etiqueta del patrón visible + Etiqueta del patrón visible Grainline @@ -4587,19 +4583,19 @@ Apply settings anyway? Grainline visible - Línea discontinua visible + Línea discontinua visible Rotation: - Rotación: + Rotación: Length: - Longitud: + Longitud: Arrows: - Flechas: + Flechas: Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4711,19 +4707,19 @@ Apply settings anyway? Top left pin: - Alfiler izquierdo superior: + Alfiler izquierdo superior: Bottom right pin: - Alfiler derecho inferior: + Alfiler derecho inferior: Top pin: - Alfiler superior: + Alfiler superior: Bottom pin: - Alfiler inferior: + Alfiler inferior: Pins @@ -4733,22 +4729,10 @@ Apply settings anyway? no pin Sin alfiler - - Piece label data - - Labels - - Height: - Altura: - - - Center pin: - - Error Error @@ -4769,6 +4753,10 @@ Apply settings anyway? Edit width + + Paths + Carpetas + DialogShoulderPoint @@ -8133,6 +8121,282 @@ Do you want to save your changes? + + TabGrainline + + Form + + + + Grainline visible + Línea discontinua visible + + + Rotation: + Rotación: + + + Formula wizard + + + + Value + + + + Calculation + Cálculo + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + + + + Center pin: + + + + Top pin: + Alfiler superior: + + + Bottom pin: + Alfiler inferior: + + + Arrows: + Flechas: + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + Letra: + + + Letter of pattern piece + Carta de trozo de estampado + + + Name of detail: + Nombre del detalle: + + + Detail + Detalle + + + Name can't be empty + El nombre no puede estar vacío + + + Material/Cut number/Placement + Material/Cortar número/Disposición + + + Cut number: + + + + Material type: + Tipo de Material: + + + You can choose one of the predefined materials or enter a new one + Puede elegir uno de los materiales predefinidos o introducir uno nuevo + + + Placement: + Ubicación: + + + Add + Agregar + + + Cancel + Cancelar + + + Remove + Quitar + + + Labels + + + + Detail label visible + Etiqueta de Detalle visible + + + Width: + Anchura: + + + Formula wizard + + + + Value + + + + Calculation + Cálculo + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + Altura: + + + Center pin: + + + + Top left pin: + Alfiler izquierdo superior: + + + Bottom right pin: + Alfiler derecho inferior: + + + Angle: + Ángulo: + + + Pattern label visible + + + + + TabPaths + + Form + + + + Main path + Ruta principal + + + All objects in path should follow in clockwise direction. + + + + Forbid piece be mirrored in a layout. + Prohibir que el trozo sea reproducido en una capa. + + + Forbid flipping + Prohibir girado + + + Ready! + ¡Listo! + + + Seam allowance + Las costuras + + + Automatic + Automático + + + Width: + Anchura: + + + Formula wizard + + + + Value + + + + Calculation + Cálculo + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + Nodos + + + Node: + Nodo: + + + Before: + Antes: + + + Return to default width + Volver al ancho predeterminado + + + Default + Defecto + + + After: + Después: + + + Angle: + Ángulo: + + + Custom + Personalizado + + + Start point: + Punto de partida: + + + End point: + Punto final: + + + Include as: + Incluir como: + + + Internal paths + Rutas internas + + + + TabPins + + Form + + + TapeConfigDialog diff --git a/share/translations/valentina_fi_FI.ts b/share/translations/valentina_fi_FI.ts index 57c711078..baf020cb4 100644 --- a/share/translations/valentina_fi_FI.ts +++ b/share/translations/valentina_fi_FI.ts @@ -3995,182 +3995,22 @@ Apply settings anyway? Seam allowance tool Saumavara työkalu - - Main path - - - - All objects in path should follow in clockwise direction. - - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! - - Seam allowance - Saumavara - - - Automatic - - - - Width: - Leveys: - - - Formula wizard - - Value Arvo - - Calculation - - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p>Näytä koko laskenta ikkunassa</p></body></html> - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - Oletus - - - After: - - - - Angle: - - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - - - - Letter of pattern piece - - - - Name of detail: - - - - Detail - Yksityiskohta - - - Name can't be empty - - - - Material/Cut number/Placement - - - - Cut number: - - - - Material type: - - - - You can choose one of the predefined materials or enter a new one - - - - Placement: - - Add - - Cancel - Peruuta - - - Remove - - - - Detail label visible - - - - Pattern label visible - - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4279,22 +4119,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4303,22 +4127,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - Korkeus: - - - Center pin: - - Error Virhe @@ -4339,6 +4151,10 @@ Apply settings anyway? Edit width + + Paths + Polut + DialogShoulderPoint @@ -7453,6 +7269,282 @@ Do you want to save your changes? + + TabGrainline + + Form + + + + Grainline visible + + + + Rotation: + + + + Formula wizard + + + + Value + Arvo + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Näytä koko laskenta ikkunassa</p></body></html> + + + Length: + + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + + + + Letter of pattern piece + + + + Name of detail: + + + + Detail + Yksityiskohta + + + Name can't be empty + + + + Material/Cut number/Placement + + + + Cut number: + + + + Material type: + + + + You can choose one of the predefined materials or enter a new one + + + + Placement: + + + + Add + + + + Cancel + Peruuta + + + Remove + + + + Labels + + + + Detail label visible + + + + Width: + Leveys: + + + Formula wizard + + + + Value + Arvo + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Näytä koko laskenta ikkunassa</p></body></html> + + + Height: + Korkeus: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + + + + Pattern label visible + + + + + TabPaths + + Form + + + + Main path + + + + All objects in path should follow in clockwise direction. + + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + + + + Seam allowance + Saumavara + + + Automatic + + + + Width: + Leveys: + + + Formula wizard + + + + Value + Arvo + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p>Näytä koko laskenta ikkunassa</p></body></html> + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + Oletus + + + After: + + + + Angle: + + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + + + TapeConfigDialog diff --git a/share/translations/valentina_fr_FR.ts b/share/translations/valentina_fr_FR.ts index a99b7f91e..18ad1eb95 100644 --- a/share/translations/valentina_fr_FR.ts +++ b/share/translations/valentina_fr_FR.ts @@ -4420,19 +4420,15 @@ Appliquer les réglages quand-même ? Main path - Chemin principal + Chemin principal All objects in path should follow in clockwise direction. - Tous les objets du chemin doivent se suivre dans le sens horaire. - - - Forbid piece be mirrored in a layout. - Forbid piece be mirrored in a layout. + Tous les objets du chemin doivent se suivre dans le sens horaire. Forbid flipping - Rotation interdite + Rotation interdite Ready! @@ -4440,19 +4436,19 @@ Appliquer les réglages quand-même ? Seam allowance - Marge de couture + Marge de couture Automatic - Automatique + Automatique Width: - Largeur : + Largeur : Formula wizard - Assistant Formule + Assistant Formule Value @@ -4460,99 +4456,87 @@ Appliquer les réglages quand-même ? Calculation - Calcul + Calcul <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p>Voir le calcul dans une boite de dialogue</p></body></html> + <html><head/><body><p>Voir le calcul dans une boite de dialogue</p></body></html> Nodes - Nœuds + Nœuds Node: - Nœud: + Nœud: Before: - Avant: + Avant: Return to default width - Retourner à la largeur par défaut + Retourner à la largeur par défaut Default - Défaut + Défaut After: - Après: + Après: Angle: - Angle: + Angle: Custom - Personnalisé + Personnalisé Start point: - Point de départ: + Point de départ: End point: - Point final: + Point final: Include as: - Inclus comme: + Inclus comme: Internal paths - Chemins internes + Chemins internes Letter: - Lettre : + Lettre : Letter of pattern piece - Lettre de l'élément de patron + Lettre de l'élément de patron Name of detail: - Nom de la pièce de patron: + Nom de la pièce de patron: Detail - Pièce de patron + Pièce de patron Name can't be empty - La valeur Nom ne peut pas être vide - - - Material/Cut number/Placement - Matière/Numéro de coupe/Placement - - - Cut number: - Numéro de découpe : + La valeur Nom ne peut pas être vide Material type: - Type de matière : - - - You can choose one of the predefined materials or enter a new one - Vous pouvez choisir un des matériaux prédéfinis ou en entrer un nouveau + Type de matière : Placement: - Placement: + Placement: Add @@ -4560,19 +4544,11 @@ Appliquer les réglages quand-même ? Cancel - Annuler + Annuler Remove - Retirer - - - Detail label visible - étiquette pièce de patron visible - - - Pattern label visible - étiquette élément de patron visible + Retirer Grainline @@ -4580,19 +4556,19 @@ Appliquer les réglages quand-même ? Grainline visible - Droit-fil visible + Droit-fil visible Rotation: - Rotation: + Rotation: Length: - Longueur: + Longueur: Arrows: - Flèches: + Flèches: Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4702,22 +4678,6 @@ Appliquer les réglages quand-même ? Just rear Juste l'arrière - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4726,22 +4686,10 @@ Appliquer les réglages quand-même ? no pin - - Piece label data - - Labels - - Height: - - - - Center pin: - - Error Erreur @@ -4762,6 +4710,10 @@ Appliquer les réglages quand-même ? Edit width + + Paths + Chemins + DialogShoulderPoint @@ -8123,6 +8075,282 @@ Voulez-vous enregistrer les changements? + + TabGrainline + + Form + + + + Grainline visible + Droit-fil visible + + + Rotation: + Rotation: + + + Formula wizard + Assistant Formule + + + Value + Valeur + + + Calculation + Calcul + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + Longueur: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + Lettre : + + + Letter of pattern piece + Lettre de l'élément de patron + + + Name of detail: + Nom de la pièce de patron: + + + Detail + Pièce de patron + + + Name can't be empty + La valeur Nom ne peut pas être vide + + + Material/Cut number/Placement + Matière/Numéro de coupe/Placement + + + Cut number: + Numéro de découpe : + + + Material type: + Type de matière : + + + You can choose one of the predefined materials or enter a new one + Vous pouvez choisir un des matériaux prédéfinis ou en entrer un nouveau + + + Placement: + Placement: + + + Add + Ajouter + + + Cancel + Annuler + + + Remove + Retirer + + + Labels + + + + Detail label visible + étiquette pièce de patron visible + + + Width: + Largeur : + + + Formula wizard + Assistant Formule + + + Value + Valeur + + + Calculation + Calcul + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Angle: + + + Pattern label visible + étiquette élément de patron visible + + + + TabPaths + + Form + + + + Main path + Chemin principal + + + All objects in path should follow in clockwise direction. + + + + Forbid piece be mirrored in a layout. + Forbid piece be mirrored in a layout. + + + Forbid flipping + Rotation interdite + + + Ready! + Prêt! + + + Seam allowance + Marge de couture + + + Automatic + Automatique + + + Width: + Largeur : + + + Formula wizard + Assistant Formule + + + Value + Valeur + + + Calculation + Calcul + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + Nœuds + + + Node: + Nœud: + + + Before: + Avant: + + + Return to default width + Retourner à la largeur par défaut + + + Default + + + + After: + Après: + + + Angle: + Angle: + + + Custom + Personnalisé + + + Start point: + Point de départ: + + + End point: + Point final: + + + Include as: + Inclus comme: + + + Internal paths + Chemins internes + + + + TabPins + + Form + + + TapeConfigDialog diff --git a/share/translations/valentina_he_IL.ts b/share/translations/valentina_he_IL.ts index db2862b2d..38446cab8 100644 --- a/share/translations/valentina_he_IL.ts +++ b/share/translations/valentina_he_IL.ts @@ -3428,182 +3428,22 @@ Apply settings anyway? Seam allowance tool - - Main path - - - - All objects in path should follow in clockwise direction. - - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! - - Seam allowance - - - - Automatic - - - - Width: - - - - Formula wizard - - Value - - Calculation - - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - - - - After: - - - - Angle: - - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - - - - Letter of pattern piece - - - - Name of detail: - - - - Detail - - - - Name can't be empty - - - - Material/Cut number/Placement - - - - Cut number: - - - - Material type: - - - - You can choose one of the predefined materials or enter a new one - - - - Placement: - - Add - - Cancel - - - - Remove - - - - Detail label visible - - - - Pattern label visible - - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -3712,22 +3552,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -3736,22 +3560,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - - - - Center pin: - - Error @@ -3772,6 +3584,10 @@ Apply settings anyway? Edit width + + Paths + + DialogShoulderPoint @@ -6669,6 +6485,282 @@ Do you want to save your changes? + + TabGrainline + + Form + + + + Grainline visible + + + + Rotation: + + + + Formula wizard + + + + Value + + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + + + + Letter of pattern piece + + + + Name of detail: + + + + Detail + + + + Name can't be empty + + + + Material/Cut number/Placement + + + + Cut number: + + + + Material type: + + + + You can choose one of the predefined materials or enter a new one + + + + Placement: + + + + Add + + + + Cancel + + + + Remove + + + + Labels + + + + Detail label visible + + + + Width: + + + + Formula wizard + + + + Value + + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + + + + Pattern label visible + + + + + TabPaths + + Form + + + + Main path + + + + All objects in path should follow in clockwise direction. + + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + + + + Seam allowance + + + + Automatic + + + + Width: + + + + Formula wizard + + + + Value + + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + + + + After: + + + + Angle: + + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + + + TapeConfigDialog diff --git a/share/translations/valentina_id_ID.ts b/share/translations/valentina_id_ID.ts index 3cc6f251e..b47e310ec 100644 --- a/share/translations/valentina_id_ID.ts +++ b/share/translations/valentina_id_ID.ts @@ -3660,182 +3660,22 @@ Apply settings anyway? Seam allowance tool - - Main path - - - - All objects in path should follow in clockwise direction. - - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! - - Seam allowance - kampuh - - - Automatic - - - - Width: - - - - Formula wizard - - Value - - Calculation - - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - - - - After: - - - - Angle: - - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - - - - Letter of pattern piece - - - - Name of detail: - - - - Detail - rincial - - - Name can't be empty - - - - Material/Cut number/Placement - - - - Cut number: - - - - Material type: - - - - You can choose one of the predefined materials or enter a new one - - - - Placement: - - Add - - Cancel - - - - Remove - - - - Detail label visible - - - - Pattern label visible - - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -3944,22 +3784,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -3968,22 +3792,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - - - - Center pin: - - Error @@ -4004,6 +3816,10 @@ Apply settings anyway? Edit width + + Paths + + DialogShoulderPoint @@ -6922,6 +6738,282 @@ Do you want to save your changes? + + TabGrainline + + Form + + + + Grainline visible + + + + Rotation: + + + + Formula wizard + + + + Value + + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + + + + Letter of pattern piece + + + + Name of detail: + + + + Detail + rincial + + + Name can't be empty + + + + Material/Cut number/Placement + + + + Cut number: + + + + Material type: + + + + You can choose one of the predefined materials or enter a new one + + + + Placement: + + + + Add + + + + Cancel + + + + Remove + + + + Labels + + + + Detail label visible + + + + Width: + + + + Formula wizard + + + + Value + + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + + + + Pattern label visible + + + + + TabPaths + + Form + + + + Main path + + + + All objects in path should follow in clockwise direction. + + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + + + + Seam allowance + kampuh + + + Automatic + + + + Width: + + + + Formula wizard + + + + Value + + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + + + + After: + + + + Angle: + + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + + + TapeConfigDialog diff --git a/share/translations/valentina_it_IT.ts b/share/translations/valentina_it_IT.ts index 8ff2f4b75..ab4183161 100644 --- a/share/translations/valentina_it_IT.ts +++ b/share/translations/valentina_it_IT.ts @@ -4341,182 +4341,22 @@ Applicare le impostazioni comunque? Seam allowance tool Strumento margine di cucitura - - Main path - - - - All objects in path should follow in clockwise direction. - Tutti gli oggetti sul tracciato devono seguire il senso orario. - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! Pronto! - - Seam allowance - Margine di cucitura - - - Automatic - - - - Width: - Larghezza: - - - Formula wizard - Formula magica - Value - - Calculation - - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - Default - - - After: - - - - Angle: - Angolo: - - - Custom - Personalizzato - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - Lettera: - - - Letter of pattern piece - - - - Name of detail: - Nome del dettaglio: - - - Detail - Dettaglio - - - Name can't be empty - - - - Material/Cut number/Placement - Materiale/Numero taglio/Posizione - - - Cut number: - Numero taglio: - - - Material type: - Tipo Materiale: - - - You can choose one of the predefined materials or enter a new one - Puoi scegliere uno dei materiali predefiniti o aggiungerne uno nuovo - - - Placement: - Posizione: - Add Aggiungi - - Cancel - Cancella - - - Remove - Rimuovi - - - Detail label visible - Dettaglio etichetta visibile - - - Pattern label visible - Modello etichetta visibile - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - Lunghezza: - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4625,22 +4465,6 @@ Applicare le impostazioni comunque? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4649,22 +4473,10 @@ Applicare le impostazioni comunque? no pin - - Piece label data - - Labels - - Height: - Altezza: - - - Center pin: - - Error Errore @@ -4685,6 +4497,10 @@ Applicare le impostazioni comunque? Edit width + + Paths + Path + DialogShoulderPoint @@ -8046,6 +7862,282 @@ Vuoi salvare le tue modifiche? + + TabGrainline + + Form + + + + Grainline visible + + + + Rotation: + + + + Formula wizard + Formula magica + + + Value + + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + Lunghezza: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + Lettera: + + + Letter of pattern piece + + + + Name of detail: + Nome del dettaglio: + + + Detail + Dettaglio + + + Name can't be empty + + + + Material/Cut number/Placement + Materiale/Numero taglio/Posizione + + + Cut number: + Numero taglio: + + + Material type: + Tipo Materiale: + + + You can choose one of the predefined materials or enter a new one + Puoi scegliere uno dei materiali predefiniti o aggiungerne uno nuovo + + + Placement: + Posizione: + + + Add + Aggiungi + + + Cancel + Cancella + + + Remove + Rimuovi + + + Labels + + + + Detail label visible + Dettaglio etichetta visibile + + + Width: + Larghezza: + + + Formula wizard + Formula magica + + + Value + + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + Altezza: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Angolo: + + + Pattern label visible + Modello etichetta visibile + + + + TabPaths + + Form + + + + Main path + + + + All objects in path should follow in clockwise direction. + Tutti gli oggetti sul tracciato devono seguire il senso orario. + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + Pronto! + + + Seam allowance + Margine di cucitura + + + Automatic + + + + Width: + Larghezza: + + + Formula wizard + Formula magica + + + Value + + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + Default + + + After: + + + + Angle: + Angolo: + + + Custom + Personalizzato + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + + + TapeConfigDialog diff --git a/share/translations/valentina_nl_NL.ts b/share/translations/valentina_nl_NL.ts index c829fe340..a0413f800 100644 --- a/share/translations/valentina_nl_NL.ts +++ b/share/translations/valentina_nl_NL.ts @@ -4423,19 +4423,19 @@ Toch de instellingen aanpassen? Main path - Hoofdpad + Hoofdpad All objects in path should follow in clockwise direction. - Alle objecten in het pad moeten in de richting van de klok gekozen worden. + Alle objecten in het pad moeten in de richting van de klok gekozen worden. Forbid piece be mirrored in a layout. - Het stuk kan niet gekanteld worden in de opmaak modus. + Het stuk kan niet gekanteld worden in de opmaak modus. Forbid flipping - Kantelen niet toegestaan + Kantelen niet toegestaan Ready! @@ -4443,19 +4443,19 @@ Toch de instellingen aanpassen? Seam allowance - Naadtoeslag + Naadtoeslag Automatic - Automatisch + Automatisch Width: - Breedte: + Breedte: Formula wizard - Formule wizard + Formule wizard Value @@ -4463,103 +4463,99 @@ Toch de instellingen aanpassen? Calculation - Berekening + Berekening <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p>Laat hele berekening zien in berichtenbox</p></body></html> + <html><head/><body><p>Laat hele berekening zien in berichtenbox</p></body></html> Nodes - Knooppunten + Knooppunten Node: - Knooppunt: + Knooppunt: Before: - Vooraf: + Vooraf: Return to default width - Terug naar standaard breedte + Terug naar standaard breedte Default - Standaard + Standaard After: - Nadat: + Nadat: Angle: - Hoek: + Hoek: Custom - Gebruikelijk + Gebruikelijk Start point: - Startpunt: + Startpunt: End point: - Eindpunt: + Eindpunt: Include as: - Hoort bij: + Hoort bij: Internal paths - Ingesloten paden - - - Pattern piece data - Gegevens van patroondeel + Ingesloten paden Letter: - Letter: + Letter: Letter of pattern piece - Letter van patroondeel + Letter van patroondeel Name of detail: - Benoem detail: + Benoem detail: Detail - Detail + Detail Name can't be empty - Naam mag niet leeg zijn + Naam mag niet leeg zijn Material/Cut number/Placement - Materiaal/Snijnummer/Plaatsing + Materiaal/Snijnummer/Plaatsing Cut number: - Snijnummer: + Snijnummer: Material type: - Materiaaltype: + Materiaaltype: You can choose one of the predefined materials or enter a new one - U kunt kiezen uit een van de voorgedefinieerde materialen of voeg een nieuwe toe + U kunt kiezen uit een van de voorgedefinieerde materialen of voeg een nieuwe toe Placement: - Plaatsing: + Plaatsing: Add @@ -4567,19 +4563,19 @@ Toch de instellingen aanpassen? Cancel - Breek af + Breek af Remove - Verwijder + Verwijder Detail label visible - Detaillabel zichtbaar + Detaillabel zichtbaar Pattern label visible - Patroonlabel zichtbaar + Patroonlabel zichtbaar Grainline @@ -4587,19 +4583,19 @@ Toch de instellingen aanpassen? Grainline visible - Recht van draadlijn zichtbaar + Recht van draadlijn zichtbaar Rotation: - Draaiing: + Draaiing: Length: - Lengte: + Lengte: Arrows: - Pijlen: + Pijlen: Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4711,19 +4707,19 @@ Toch de instellingen aanpassen? Top left pin: - Pin linksboven: + Pin linksboven: Bottom right pin: - Pin rechtsonder: + Pin rechtsonder: Top pin: - Bovenste pin: + Bovenste pin: Bottom pin: - Onderste pin: + Onderste pin: Pins @@ -4735,39 +4731,43 @@ Toch de instellingen aanpassen? Piece label data - + Gegevens op label Labels - + Labels Height: - Hoogte: + Hoogte: Center pin: - + Centrale pin: Error - + Fout Edit length - + Bewerk lengte Edit angle - + Bewerk hoek Edit height - + Bewerk hoogte Edit width - + Bewerk breedte + + + Paths + Paden @@ -6815,7 +6815,7 @@ Do you want to save your changes? Synchronize linked to the pattern measurements after change - + Na wijziging in matentabel synchroniseren Unload Current @@ -8134,6 +8134,282 @@ Wil je deze veranderingen opslaan? Maatsysteem + + TabGrainline + + Form + Vorm + + + Grainline visible + Recht van draadlijn zichtbaar + + + Rotation: + Draaiing: + + + Formula wizard + Formule wizard + + + Value + Waarde + + + Calculation + Berekening + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + Lengte: + + + Center pin: + Centrale pin: + + + Top pin: + Bovenste pin: + + + Bottom pin: + Onderste pin: + + + Arrows: + Pijlen: + + + + TabLabels + + Form + Vorm + + + Piece label data + Gegevens op label + + + Letter: + Letter: + + + Letter of pattern piece + Letter van patroondeel + + + Name of detail: + + + + Detail + Detail + + + Name can't be empty + Naam mag niet leeg zijn + + + Material/Cut number/Placement + + + + Cut number: + Snijnummer: + + + Material type: + + + + You can choose one of the predefined materials or enter a new one + U kunt kiezen uit een van de voorgedefinieerde materialen of voeg een nieuwe toe + + + Placement: + + + + Add + Voeg toe + + + Cancel + + + + Remove + Verwijder + + + Labels + Labels + + + Detail label visible + + + + Width: + Breedte: + + + Formula wizard + Formule wizard + + + Value + Waarde + + + Calculation + Berekening + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + Hoogte: + + + Center pin: + Centrale pin: + + + Top left pin: + Pin linksboven: + + + Bottom right pin: + Pin rechtsonder: + + + Angle: + Hoek: + + + Pattern label visible + + + + + TabPaths + + Form + Vorm + + + Main path + Hoofdpad + + + All objects in path should follow in clockwise direction. + + + + Forbid piece be mirrored in a layout. + Het stuk kan niet gekanteld worden in de opmaak modus. + + + Forbid flipping + Kantelen niet toegestaan + + + Ready! + Klaar! + + + Seam allowance + Naadtoeslag + + + Automatic + Automatisch + + + Width: + Breedte: + + + Formula wizard + Formule wizard + + + Value + Waarde + + + Calculation + Berekening + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + Knooppunten + + + Node: + Knooppunt: + + + Before: + Vooraf: + + + Return to default width + Terug naar standaard breedte + + + Default + + + + After: + Nadat: + + + Angle: + Hoek: + + + Custom + + + + Start point: + Startpunt: + + + End point: + Eindpunt: + + + Include as: + Hoort bij: + + + Internal paths + Ingesloten paden + + + + TabPins + + Form + Vorm + + TapeConfigDialog @@ -9282,11 +9558,11 @@ Wil je deze veranderingen opslaan? VSettings patterns - + patronen layouts - + layouts @@ -9318,13 +9594,17 @@ Wil je deze veranderingen opslaan? on Fold Op vouw + + Cut + Knip + cut - + knip on fold - + op vouw @@ -9361,6 +9641,18 @@ Wil je deze veranderingen opslaan? rotate pattern info label draai patroon informatie label + + In layout + In layout + + + move grainline + verplaats rechtvandraad + + + resize grainline + vergroot/verklein rechtvandraad + rotate grainline Draai de recht-van-draad @@ -9665,27 +9957,27 @@ Wil je deze veranderingen opslaan? rotate pattern piece label - draai patroon deel label + draai label move pattern info label - verplaats patroon informatie label + verplaats patroon informatie label resize pattern info label - vergroot/verklein patroon informatie label + vergroot/verklein patroon informatie label rotate pattern info label - draai patroon informatie label + draai patroon informatie label move grainline - + verplaats rechtvandraad resize grainline - + vergroot/verklein rechtvandraad rotate grainline @@ -9697,7 +9989,7 @@ Wil je deze veranderingen opslaan? In layout - + In layout Delete @@ -10815,12 +11107,12 @@ Wil je deze veranderingen opslaan? size placeholder - + maat height placeholder - + hoogte C1LengthSpl_ @@ -10845,7 +11137,7 @@ Wil je deze veranderingen opslaan? CurrentSeamAllowance Do not add space between words - + HuidigeNaadToegift degTorad @@ -11094,14 +11386,14 @@ Wil je deze veranderingen opslaan? VisToolMove Length = %1%2, angle = %3°, <b>Shift</b> - sticking angle, <b>Mouse click</b> - finish creation - + Lengte = %1%2, hoek = %3°, <b>Shift</b> - aangrenzende hoek, <b>Muis klik</b> -voltooi creatie VisToolRotation Rotating angle = %1°, <b>Shift</b> - sticking angle, <b>Mouse click</b> - finish creation - + Hoek van draaiing = %1°, <b>Shift</b> - aangrenzende hoek, <b>Muisklik</b> - voltooi creatie diff --git a/share/translations/valentina_pt_BR.ts b/share/translations/valentina_pt_BR.ts index bfb71bb44..c582bf7c1 100644 --- a/share/translations/valentina_pt_BR.ts +++ b/share/translations/valentina_pt_BR.ts @@ -3860,182 +3860,22 @@ Apply settings anyway? Seam allowance tool Ferramenta de margem de costura - - Main path - - - - All objects in path should follow in clockwise direction. - Todos os objetos no traçado devem seguir o sentido horário. - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! Pronto! - - Seam allowance - Margem de costura - - - Automatic - - - - Width: - Largura: - - - Formula wizard - Auxiliar de fórmula - Value Valor - - Calculation - Cálculo - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - - - - After: - - - - Angle: - Ângulo: - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - - - - Letter of pattern piece - - - - Name of detail: - Nome do detalhe: - - - Detail - Detalhe - - - Name can't be empty - - - - Material/Cut number/Placement - - - - Cut number: - - - - Material type: - - - - You can choose one of the predefined materials or enter a new one - - - - Placement: - - Add - - Cancel - - - - Remove - - - - Detail label visible - - - - Pattern label visible - - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - Comprimento: - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4144,22 +3984,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4168,22 +3992,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - - - - Center pin: - - Error Erro @@ -4204,6 +4016,10 @@ Apply settings anyway? Edit width + + Paths + Paths + DialogShoulderPoint @@ -7161,6 +6977,282 @@ Do you want to save your changes? + + TabGrainline + + Form + Forma + + + Grainline visible + + + + Rotation: + + + + Formula wizard + Auxiliar de fórmula + + + Value + Valor + + + Calculation + Cálculo + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + Comprimento: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + Forma + + + Piece label data + + + + Letter: + + + + Letter of pattern piece + + + + Name of detail: + Nome do detalhe: + + + Detail + Detalhe + + + Name can't be empty + + + + Material/Cut number/Placement + + + + Cut number: + + + + Material type: + + + + You can choose one of the predefined materials or enter a new one + + + + Placement: + + + + Add + + + + Cancel + + + + Remove + + + + Labels + + + + Detail label visible + + + + Width: + Largura: + + + Formula wizard + Auxiliar de fórmula + + + Value + Valor + + + Calculation + Cálculo + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Ângulo: + + + Pattern label visible + + + + + TabPaths + + Form + Forma + + + Main path + + + + All objects in path should follow in clockwise direction. + Todos os objetos no traçado devem seguir o sentido horário. + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + Pronto! + + + Seam allowance + Margem de costura + + + Automatic + + + + Width: + Largura: + + + Formula wizard + Auxiliar de fórmula + + + Value + Valor + + + Calculation + Cálculo + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + + + + After: + + + + Angle: + Ângulo: + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + Forma + + TapeConfigDialog diff --git a/share/translations/valentina_ro_RO.ts b/share/translations/valentina_ro_RO.ts index 5e1b4c935..e7bdf8445 100644 --- a/share/translations/valentina_ro_RO.ts +++ b/share/translations/valentina_ro_RO.ts @@ -3992,182 +3992,22 @@ Apply settings anyway? Seam allowance tool Instrument pentru adaos la cusătură - - Main path - - - - All objects in path should follow in clockwise direction. - Toate obiectele de pe rută trebuie să urmeze în sensul acelor de ceasornic. - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! Gata! - - Seam allowance - Adaos cusatură - - - Automatic - - - - Width: - Lățime: - - - Formula wizard - Asistent Formulă - Value Valoare - - Calculation - Calcul - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><p> Arată calcul complet în message box </p></body></html> - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - - - - After: - - - - Angle: - Unghi: - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - - - - Letter of pattern piece - - - - Name of detail: - Nume detaliu: - - - Detail - Detalii - - - Name can't be empty - - - - Material/Cut number/Placement - - - - Cut number: - - - - Material type: - - - - You can choose one of the predefined materials or enter a new one - - - - Placement: - - Add - - Cancel - Anulare - - - Remove - - - - Detail label visible - - - - Pattern label visible - - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - Lungime: - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4276,22 +4116,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4300,22 +4124,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - Înălțime: - - - Center pin: - - Error Eroare @@ -4336,6 +4148,10 @@ Apply settings anyway? Edit width + + Paths + Căi + DialogShoulderPoint @@ -7417,6 +7233,282 @@ Do you want to save your changes? + + TabGrainline + + Form + + + + Grainline visible + + + + Rotation: + + + + Formula wizard + Asistent Formulă + + + Value + Valoare + + + Calculation + Calcul + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p> Arată calcul complet în message box </p></body></html> + + + Length: + Lungime: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + + + + Letter of pattern piece + + + + Name of detail: + Nume detaliu: + + + Detail + Detalii + + + Name can't be empty + + + + Material/Cut number/Placement + + + + Cut number: + + + + Material type: + + + + You can choose one of the predefined materials or enter a new one + + + + Placement: + + + + Add + + + + Cancel + Anulare + + + Remove + + + + Labels + + + + Detail label visible + + + + Width: + Lățime: + + + Formula wizard + Asistent Formulă + + + Value + Valoare + + + Calculation + Calcul + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p> Arată calcul complet în message box </p></body></html> + + + Height: + Înălțime: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Unghi: + + + Pattern label visible + + + + + TabPaths + + Form + + + + Main path + + + + All objects in path should follow in clockwise direction. + Toate obiectele de pe rută trebuie să urmeze în sensul acelor de ceasornic. + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + Gata! + + + Seam allowance + Adaos cusatură + + + Automatic + + + + Width: + Lățime: + + + Formula wizard + Asistent Formulă + + + Value + Valoare + + + Calculation + Calcul + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><p> Arată calcul complet în message box </p></body></html> + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + + + + After: + + + + Angle: + Unghi: + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + + + TapeConfigDialog diff --git a/share/translations/valentina_ru_RU.ts b/share/translations/valentina_ru_RU.ts index c05fdd04b..1a6948f89 100644 --- a/share/translations/valentina_ru_RU.ts +++ b/share/translations/valentina_ru_RU.ts @@ -4421,182 +4421,22 @@ Apply settings anyway? Seam allowance tool Деталь - - Main path - - - - All objects in path should follow in clockwise direction. - Все объекты должны следовать в направлении по часовой стрелке. - - - Forbid piece be mirrored in a layout. - Запрет отражения выкройки в раскладке - - - Forbid flipping - - Ready! Готовы! - - Seam allowance - Прибавка на швы - - - Automatic - - - - Width: - Ширина: - - - Formula wizard - Мастер формул - Value Значение - - Calculation - - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - По умолчанию - - - After: - - - - Angle: - Угол: - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - Буква: - - - Letter of pattern piece - Обозначение выкройки - - - Name of detail: - Имя детали: - - - Detail - Деталь - - - Name can't be empty - Имя не может быть пустым - - - Material/Cut number/Placement - Материал/номер раскроя/размещение - - - Cut number: - Номер раскроя: - - - Material type: - Тип материала: - - - You can choose one of the predefined materials or enter a new one - Вы можете выбрать один из предустановленных в системе материалов или ввести новый. - - - Placement: - Размещение: - Add Добавить - - Cancel - Отмена - - - Remove - Удалить - - - Detail label visible - Отображение названий деталей - - - Pattern label visible - Отображение названия выкройки - Grainline Долевая нить - - Grainline visible - Видимость долевой нити - - - Rotation: - Вращение: - - - Length: - Длина: - - - Arrows: - Стрелки: - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4705,22 +4545,6 @@ Apply settings anyway? Just rear Только зад - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4729,22 +4553,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - Высота: - - - Center pin: - - Error Ошибка @@ -4765,6 +4577,10 @@ Apply settings anyway? Edit width + + Paths + Пути + DialogShoulderPoint @@ -8130,6 +7946,282 @@ Do you want to save your changes? + + TabGrainline + + Form + Форма + + + Grainline visible + Видимость долевой нити + + + Rotation: + Вращение: + + + Formula wizard + Мастер формул + + + Value + Значение + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + Длина: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + Стрелки: + + + + TabLabels + + Form + Форма + + + Piece label data + + + + Letter: + Буква: + + + Letter of pattern piece + Обозначение выкройки + + + Name of detail: + Имя детали: + + + Detail + Деталь + + + Name can't be empty + Имя не может быть пустым + + + Material/Cut number/Placement + Материал/номер раскроя/размещение + + + Cut number: + Номер раскроя: + + + Material type: + Тип материала: + + + You can choose one of the predefined materials or enter a new one + Вы можете выбрать один из предустановленных в системе материалов или ввести новый. + + + Placement: + Размещение: + + + Add + Добавить + + + Cancel + Отмена + + + Remove + Удалить + + + Labels + + + + Detail label visible + Отображение названий деталей + + + Width: + Ширина: + + + Formula wizard + Мастер формул + + + Value + Значение + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + Высота: + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Угол: + + + Pattern label visible + Отображение названия выкройки + + + + TabPaths + + Form + Форма + + + Main path + + + + All objects in path should follow in clockwise direction. + Все объекты должны следовать в направлении по часовой стрелке. + + + Forbid piece be mirrored in a layout. + Запрет отражения выкройки в раскладке + + + Forbid flipping + + + + Ready! + Готовы! + + + Seam allowance + Прибавка на швы + + + Automatic + + + + Width: + Ширина: + + + Formula wizard + Мастер формул + + + Value + Значение + + + Calculation + + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + По умолчанию + + + After: + + + + Angle: + Угол: + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + Форма + + TapeConfigDialog diff --git a/share/translations/valentina_uk_UA.ts b/share/translations/valentina_uk_UA.ts index 0822f09ce..8886c2756 100644 --- a/share/translations/valentina_uk_UA.ts +++ b/share/translations/valentina_uk_UA.ts @@ -4313,182 +4313,22 @@ Apply settings anyway? Seam allowance tool Деталь - - Main path - - - - All objects in path should follow in clockwise direction. - Всі обєкти в контурі повинні слідувати за годинниковою стрілкою. - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! Готовий! - - Seam allowance - Прибавка на шви - - - Automatic - - - - Width: - Ширина: - - - Formula wizard - - Value Значення - - Calculation - Розрахунок - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - <html><head/><body><р>Показати повний розрахунок у вікні повідомлення</p></body</html> - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - По замовчуванню - - - After: - - - - Angle: - Кут: - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - Літера: - - - Letter of pattern piece - - - - Name of detail: - Ім'я деталі: - - - Detail - Деталь - - - Name can't be empty - - - - Material/Cut number/Placement - Матеріал/Кількість деталей/Розташування - - - Cut number: - Кількість деталей: - - - Material type: - Тип матеріалу: - - - You can choose one of the predefined materials or enter a new one - - - - Placement: - Розташування: - Add Додати - - Cancel - Відмінити - - - Remove - Видалити - - - Detail label visible - Мітка деталі видима - - - Pattern label visible - Мітка вікрійки видима - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - Довжина: - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -4597,22 +4437,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -4621,22 +4445,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - - - - Center pin: - - Error Помилка @@ -4657,6 +4469,10 @@ Apply settings anyway? Edit width + + Paths + Шляхи + DialogShoulderPoint @@ -8013,6 +7829,282 @@ Do you want to save your changes? + + TabGrainline + + Form + Форма + + + Grainline visible + + + + Rotation: + + + + Formula wizard + + + + Value + Значення + + + Calculation + Розрахунок + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><р>Показати повний розрахунок у вікні повідомлення</p></body</html> + + + Length: + Довжина: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + Форма + + + Piece label data + + + + Letter: + Літера: + + + Letter of pattern piece + + + + Name of detail: + Ім'я деталі: + + + Detail + Деталь + + + Name can't be empty + + + + Material/Cut number/Placement + Матеріал/Кількість деталей/Розташування + + + Cut number: + Кількість деталей: + + + Material type: + Тип матеріалу: + + + You can choose one of the predefined materials or enter a new one + + + + Placement: + Розташування: + + + Add + Додати + + + Cancel + Відмінити + + + Remove + Видалити + + + Labels + + + + Detail label visible + Мітка деталі видима + + + Width: + Ширина: + + + Formula wizard + + + + Value + Значення + + + Calculation + Розрахунок + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><р>Показати повний розрахунок у вікні повідомлення</p></body</html> + + + Height: + + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + Кут: + + + Pattern label visible + Мітка вікрійки видима + + + + TabPaths + + Form + Форма + + + Main path + + + + All objects in path should follow in clockwise direction. + Всі обєкти в контурі повинні слідувати за годинниковою стрілкою. + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + Готовий! + + + Seam allowance + Прибавка на шви + + + Automatic + + + + Width: + Ширина: + + + Formula wizard + + + + Value + Значення + + + Calculation + Розрахунок + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + <html><head/><body><р>Показати повний розрахунок у вікні повідомлення</p></body</html> + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + По замовчуванню + + + After: + + + + Angle: + Кут: + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + Форма + + TapeConfigDialog diff --git a/share/translations/valentina_zh_CN.ts b/share/translations/valentina_zh_CN.ts index 86cd5eaf9..8bdb0825d 100644 --- a/share/translations/valentina_zh_CN.ts +++ b/share/translations/valentina_zh_CN.ts @@ -3351,182 +3351,22 @@ Apply settings anyway? Seam allowance tool - - Main path - - - - All objects in path should follow in clockwise direction. - - - - Forbid piece be mirrored in a layout. - - - - Forbid flipping - - Ready! - - Seam allowance - - - - Automatic - - - - Width: - 宽度: - - - Formula wizard - - Value - - Calculation - 打算 - - - <html><head/><body><p>Show full calculation in message box</p></body></html> - - - - Nodes - - - - Node: - - - - Before: - - - - Return to default width - - - - Default - - - - After: - - - - Angle: - - - - Custom - - - - Start point: - - - - End point: - - - - Include as: - - - - Internal paths - - - - Letter: - - - - Letter of pattern piece - - - - Name of detail: - - - - Detail - - - - Name can't be empty - - - - Material/Cut number/Placement - - - - Cut number: - - - - Material type: - - - - You can choose one of the predefined materials or enter a new one - - - - Placement: - - Add - - Cancel - - - - Remove - - - - Detail label visible - - - - Pattern label visible - - Grainline - - Grainline visible - - - - Rotation: - - - - Length: - 长度: - - - Arrows: - - Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation @@ -3635,22 +3475,6 @@ Apply settings anyway? Just rear - - Top left pin: - - - - Bottom right pin: - - - - Top pin: - - - - Bottom pin: - - Pins @@ -3659,22 +3483,10 @@ Apply settings anyway? no pin - - Piece label data - - Labels - - Height: - - - - Center pin: - - Error 错误 @@ -3695,6 +3507,10 @@ Apply settings anyway? Edit width + + Paths + 路径 + DialogShoulderPoint @@ -6600,6 +6416,282 @@ Do you want to save your changes? + + TabGrainline + + Form + + + + Grainline visible + + + + Rotation: + + + + Formula wizard + + + + Value + + + + Calculation + 打算 + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Length: + 长度: + + + Center pin: + + + + Top pin: + + + + Bottom pin: + + + + Arrows: + + + + + TabLabels + + Form + + + + Piece label data + + + + Letter: + + + + Letter of pattern piece + + + + Name of detail: + + + + Detail + + + + Name can't be empty + + + + Material/Cut number/Placement + + + + Cut number: + + + + Material type: + + + + You can choose one of the predefined materials or enter a new one + + + + Placement: + + + + Add + + + + Cancel + + + + Remove + + + + Labels + + + + Detail label visible + + + + Width: + 宽度: + + + Formula wizard + + + + Value + + + + Calculation + 打算 + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Height: + + + + Center pin: + + + + Top left pin: + + + + Bottom right pin: + + + + Angle: + + + + Pattern label visible + + + + + TabPaths + + Form + + + + Main path + + + + All objects in path should follow in clockwise direction. + + + + Forbid piece be mirrored in a layout. + + + + Forbid flipping + + + + Ready! + + + + Seam allowance + + + + Automatic + + + + Width: + 宽度: + + + Formula wizard + + + + Value + + + + Calculation + 打算 + + + <html><head/><body><p>Show full calculation in message box</p></body></html> + + + + Nodes + + + + Node: + + + + Before: + + + + Return to default width + + + + Default + + + + After: + + + + Angle: + + + + Custom + + + + Start point: + + + + End point: + + + + Include as: + + + + Internal paths + + + + + TabPins + + Form + + + TapeConfigDialog