Lupdate.

--HG--
branch : develop

share/translations/measurements_p0_ru_RU.ts

@@ -7,7 +7,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="207"/>
         <source>height</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation>Высота</translation>
+        <translation>рост</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="209"/>

share/translations/measurements_p13_ru_RU.ts

@@ -7,7 +7,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="207"/>
         <source>height</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation>высота</translation>
+        <translation>рост</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="209"/>

share/translations/measurements_p53_cs_CZ.ts

@@ -3018,7 +3018,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1513"/>
         <source>neck_side_to_armpit_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>strana_krku_k_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1515"/>
@@ -3072,13 +3072,13 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1534"/>
         <source>neck_side_to_armpit_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>strana_krku_k_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1536"/>
         <source>Neck Side to Highbust Side, back</source>
         <comment>Full measurement name.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Strana krku ke straně nadprsí, vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1537"/>
@@ -3114,7 +3114,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1562"/>
         <source>Arm: Shoulder Tip to Wrist, bent</source>
         <comment>Full measurement name.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Ruka: špička ramene k zápěstí, ohnuto</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1563"/>
@@ -3162,7 +3162,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1583"/>
         <source>arm_elbow_circ_bent</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>loket_ruky_obvod_ohnuto</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1585"/>
@@ -3180,19 +3180,19 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1589"/>
         <source>arm_shoulder_tip_to_wrist</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>špička_ramene_ruky_k_zápěstí</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1591"/>
         <source>Arm: Shoulder Tip to Wrist</source>
         <comment>Full measurement name.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Ruka: Špička ramene k zápěstí</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1592"/>
         <source>From Shoulder Tip to Wrist bone, arm straight.</source>
         <comment>Full measurement description.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Od špičky ramene ke kosti zápěstí. Ruka je držena rovně.</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1596"/>
@@ -3222,7 +3222,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1605"/>
         <source>Arm: Elbow to Wrist</source>
         <comment>Full measurement name.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Ruka: Loket k zápěstí</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1606"/>
@@ -3264,13 +3264,13 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1621"/>
         <source>From Armpit to inner Elbow, arm straight.</source>
         <comment>Full measurement description.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Od podpaží k vnitřní strany lokte. Ruka je držena rovně.</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1625"/>
         <source>arm_elbow_to_wrist_inside</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>loket_ruky_k_zápěstí_uvnitř</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1627"/>
@@ -3288,7 +3288,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1633"/>
         <source>arm_upper_circ</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>ruka_nadloktí_obvod</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1635"/>
@@ -3300,7 +3300,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1636"/>
         <source>Arm circumference at Armpit level.</source>
         <comment>Full measurement description.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Obvod nadloktí ve výšce podpaží.</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1639"/>
@@ -3390,7 +3390,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1667"/>
         <source>From Shoulder Tip down to Armpit level.</source>
         <comment>Full measurement description.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Od špičky ramene k výšce podpaží.</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1670"/>
@@ -3456,7 +3456,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1697"/>
         <source>Armscye: Length</source>
         <comment>Full measurement name.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Průramek (otvor rukávu): Délka</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1698"/>
@@ -3486,7 +3486,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1709"/>
         <source>arm_neck_side_to_outer_elbow</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>ruka_strana_krku_k_vnější_straně_lokte</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1711"/>
@@ -3510,7 +3510,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1730"/>
         <source>Leg: Crotch to floor</source>
         <comment>Full measurement name.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Noha: Rozkrok po podlahu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1731"/>
@@ -4339,7 +4339,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="2090"/>
         <source>Measure in a curve from Armfold Left Front through Bust Front curved back up to Armfold Right Front.</source>
         <comment>Full measurement description.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Měřte v křivce od podpaží vlevo vpředu přes prsa vpředu zahnuto zpět až po podpaží vpravo vpředu.</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="2094"/>
@@ -4357,25 +4357,25 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="2097"/>
         <source>Measure from Armfold Front to Bust Front, shortest distance between the two, as straight as possible.</source>
         <comment>Full measurement description.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Měřte od podpaží vpředu po prsa vpředu, nejkratší vzdálenost mezi nimi, rovně, jak je to jen možné.</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="2101"/>
         <source>highbust_b_over_shoulder_to_highbust_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>nadprsí_vzadu_přes_rameno_po_nadprsí_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="2103"/>
         <source>Highbust Back, over Shoulder, to Highbust level</source>
         <comment>Full measurement name.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Nadprsí vzadu, přes rameno, po nadprsí vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="2105"/>
         <source>From Highbust Back, over Shoulder, then aim at Bustpoint, stopping measurement at Highbust level.</source>
         <comment>Full measurement description.</comment>
-        <translation type="unfinished"></translation>
+        <translation>Od nadprsí vzadu, přes rameno, potom mířit na bod prsů, zastavení měření ve výšce nadprsí.</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="2110"/>

share/translations/valentina.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radius can&apos;t be negative</translation>
+        <translation type="vanished">Radius can&apos;t be negative</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Length can&apos;t be equal 0</translation>
+        <translation type="vanished">Length can&apos;t be equal 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2110,11 +2110,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation type="unfinished">Error</translation>
+        <translation type="obsolete">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished">Radius can&apos;t be negative</translation>
+        <translation type="obsolete">Radius can&apos;t be negative</translation>
     </message>
     <message>
         <source>Angles equal</source>
@@ -4390,10 +4390,6 @@ Apply settings anyway?</source>
         <source>Angle:</source>
         <translation type="unfinished">Angle:</translation>
     </message>
-    <message>
-        <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished">Reverse</translation>
@@ -4618,6 +4614,22 @@ Apply settings anyway?</source>
         <source>Current seam allowance</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogPin</name>
@@ -5663,10 +5675,6 @@ Apply settings anyway?</source>
         <source>Arrows:</source>
         <translation type="obsolete">Arrows:</translation>
     </message>
-    <message>
-        <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Cut %1 of %2%3</source>
         <translation type="obsolete">Cut %1 of %2%3</translation>
@@ -5887,6 +5895,10 @@ Apply settings anyway?</source>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;Empty&gt;</translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>DialogShoulderPoint</name>
@@ -6146,11 +6158,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Length can&apos;t be negative</translation>
+        <translation type="vanished">Length can&apos;t be negative</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6285,11 +6297,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Length can&apos;t be negative</translation>
+        <translation type="vanished">Length can&apos;t be negative</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6338,23 +6350,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Empty field</translation>
+        <translation type="vanished">Empty field</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Value can&apos;t be 0</translation>
+        <translation type="vanished">Value can&apos;t be 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Value</translation>
+        <translation type="vanished">Value</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Parser error: %1</translation>
+        <translation type="vanished">Parser error: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6408,14 +6420,6 @@ Apply settings anyway?</source>
         <source>by second edge right angle</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be less than 0</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>DialogTriangle</name>
@@ -7914,10 +7918,6 @@ Do you want to save your changes?</translation>
         <source>Select main path objects clockwise.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>The document has no write permissions.</source>
         <translation type="unfinished"></translation>
@@ -8022,14 +8022,6 @@ Do you want to save your changes?</translation>
         <source>Forum</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation type="unfinished"></translation>
@@ -8210,6 +8202,18 @@ Do you want to save your changes?</translation>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>MainWindowsNoGUI</name>
@@ -9143,6 +9147,34 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Error</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Value can&apos;t be 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Parser error: %1</translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10513,6 +10545,18 @@ Do you want to save your changes?</translation>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -11067,48 +11111,108 @@ Do you want to save your changes?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <translation type="obsolete">Letter</translation>
+    </message>
+    <message>
+        <source>Legal</source>
+        <translation type="obsolete">Legal</translation>
+    </message>
+    <message>
+        <source>Roll 24in</source>
+        <translation type="obsolete">Roll 24in</translation>
+    </message>
+    <message>
+        <source>Roll 30in</source>
+        <translation type="obsolete">Roll 30in</translation>
+    </message>
+    <message>
+        <source>Roll 36in</source>
+        <translation type="obsolete">Roll 36in</translation>
+    </message>
+    <message>
+        <source>Roll 42in</source>
+        <translation type="obsolete">Roll 42in</translation>
+    </message>
+    <message>
+        <source>Roll 44in</source>
+        <translation type="obsolete">Roll 44in</translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <translation type="obsolete">Custom</translation>
+    </message>
+    <message>
+        <source>Roll 48in</source>
+        <translation type="obsolete">Roll 44in {48i?}</translation>
+    </message>
+    <message>
+        <source>Roll 62in</source>
+        <translation type="obsolete">Roll 44in {62i?}</translation>
+    </message>
+    <message>
+        <source>Roll 72in</source>
+        <translation type="obsolete">Roll 44in {72i?}</translation>
+    </message>
+    <message>
+        <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Letter</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Legal</translation>
     </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 24in</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 30in</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 36in</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 42in</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished">Custom</translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Custom</translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -13424,6 +13528,10 @@ Do you want to save your changes?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14955,18 +15063,26 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14977,14 +15093,22 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14994,11 +15118,11 @@ Do you want to save your changes?</translation>
         <translation type="vanished">Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -15006,14 +15130,22 @@ Do you want to save your changes?</translation>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+        <translation type="vanished">Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -15024,11 +15156,19 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+        <translation type="vanished">Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_cs_CZ.ts

@@ -228,7 +228,7 @@
     </message>
     <message>
         <source>Label language</source>
-        <translation type="vanished">Jazyk štítků</translation>
+        <translation type="vanished">Jazyk popisu</translation>
     </message>
     <message>
         <source>Send crash reports</source>
@@ -272,7 +272,7 @@
     </message>
     <message>
         <source>Label language:</source>
-        <translation type="vanished">Jazyk označení:</translation>
+        <translation type="vanished">Jazyk popisu:</translation>
     </message>
     <message>
         <source>Pattern making system</source>
@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Chyba</translation>
+        <translation type="vanished">Chyba</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Poloměr nemůže být záporný</translation>
+        <translation type="vanished">Poloměr nemůže být záporný</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Délka se nemůže rovnat 0</translation>
+        <translation type="vanished">Délka se nemůže rovnat 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -808,7 +808,7 @@
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>First point</source>
@@ -1041,7 +1041,7 @@
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Type of line</source>
@@ -1136,7 +1136,7 @@
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Segment an arc</source>
@@ -1215,7 +1215,7 @@
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Segmenting a simple curve</source>
@@ -1684,7 +1684,7 @@
     </message>
     <message>
         <source>Centers horizontally in the available space</source>
-        <translation>Vystředí vodorovně v dostupném prostoru</translation>
+        <translation>Vystředit vodorovně v dostupném prostoru</translation>
     </message>
     <message>
         <source>Aligns with the right edge</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Chyba</translation>
+        <translation type="vanished">Chyba</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Poloměr nemůže být záporný</translation>
+        <translation type="vanished">Poloměr nemůže být záporný</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -2173,7 +2173,7 @@
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Type of line</source>
@@ -2504,7 +2504,7 @@
     <name>DialogHeight</name>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Base point</source>
@@ -3327,7 +3327,7 @@ Přesto použít nastavení?</translation>
     <name>DialogLineIntersect</name>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>First line</source>
@@ -3414,7 +3414,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Type of line</source>
@@ -3794,7 +3794,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>First point</source>
@@ -4088,7 +4088,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>For technical notes</source>
-        <translation>Pro technické poznámky</translation>
+        <translation>Technické poznámky</translation>
     </message>
     <message>
         <source>Label data</source>
@@ -4144,7 +4144,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Label language:</source>
-        <translation type="unfinished"></translation>
+        <translation type="unfinished">Jazyk popisu:</translation>
     </message>
 </context>
 <context>
@@ -4386,7 +4386,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Vybrat hlavní cestu předmětů, &lt;b&gt;Shift&lt;/b&gt; - obrátit směr křivky, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytvoření</translation>
+        <translation type="vanished">Vybrat hlavní cestu předmětů, &lt;b&gt;Shift&lt;/b&gt; - obrátit směr křivky, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytvoření</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4600,6 +4600,22 @@ Přesto použít nastavení?</translation>
         <source>Excluded</source>
         <translation>Vyloučeno</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Nynější přídavek na šev</translation>
@@ -4763,7 +4779,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Tangent point</source>
@@ -4826,7 +4842,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Center of the circle</source>
@@ -4917,7 +4933,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Center of arc</source>
@@ -4992,7 +5008,7 @@ Přesto použít nastavení?</translation>
     <name>DialogPointOfIntersection</name>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>First point of angle</source>
@@ -5047,7 +5063,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>First arc</source>
@@ -5118,7 +5134,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Center of the first circle</source>
@@ -5524,7 +5540,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Vybrat hlavní cestu předmětů po směru hodinových ručiček, &lt;b&gt;Shift&lt;/b&gt; - obrátit směr křivky, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytvoření</translation>
+        <translation type="vanished">Vybrat hlavní cestu předmětů po směru hodinových ručiček, &lt;b&gt;Shift&lt;/b&gt; - obrátit směr křivky, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytvoření</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5714,6 +5730,10 @@ Přesto použít nastavení?</translation>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation>Pro otevření všech vlastností jednotlivosti (dílu střihu) dokončete vytvoření hlavní cesty. Stiskněte, prosím, OK.</translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;prázdné&gt;</translation>
@@ -5739,7 +5759,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>First point</source>
@@ -5981,11 +6001,11 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Chyba</translation>
+        <translation type="vanished">Chyba</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Délka nemůže být záporná</translation>
+        <translation type="vanished">Délka nemůže být záporná</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6120,11 +6140,11 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Chyba</translation>
+        <translation type="vanished">Chyba</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Délka nemůže být záporná</translation>
+        <translation type="vanished">Délka nemůže být záporná</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6174,23 +6194,23 @@ Přesto použít nastavení?</translation>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Chyba</translation>
+        <translation type="vanished">Chyba</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Prázdné pole</translation>
+        <translation type="vanished">Prázdné pole</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Hodnota nemůže být 0</translation>
+        <translation type="vanished">Hodnota nemůže být 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Hodnota</translation>
+        <translation type="vanished">Hodnota</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Chyba zpracování: %1</translation>
+        <translation type="vanished">Chyba zpracování: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6246,18 +6266,18 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Neplatný výsledek. Hodnota je nekonečná nebo NaN. Prověřte, prosím, své výpočty.</translation>
+        <translation type="vanished">Neplatný výsledek. Hodnota je nekonečná nebo NaN. Prověřte, prosím, své výpočty.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Hodnota nemůže být menší než 0</translation>
+        <translation type="vanished">Hodnota nemůže být menší než 0</translation>
     </message>
 </context>
 <context>
     <name>DialogTriangle</name>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>First point of axis</source>
@@ -7752,7 +7772,7 @@ Chcete uložit své změny?</translation>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Vyberte předměty cesty, &lt;b&gt;Shift&lt;/b&gt; - obrátitkřivku směru</translation>
+        <translation type="vanished">Vyberte předměty cesty, &lt;b&gt;Shift&lt;/b&gt; - obrátitkřivku směru</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7800,7 +7820,7 @@ Chcete uložit své změny?</translation>
     </message>
     <message>
         <source>Open Tape</source>
-        <translation>Otevřít pásek měření</translation>
+        <translation>Otevřít Tape</translation>
     </message>
     <message>
         <source>Edit Current</source>
@@ -7860,11 +7880,11 @@ Chcete uložit své změny?</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Vyberte jeden nebo více předmětů, podržet &lt;b&gt;%1&lt;/b&gt; - pro vícenásobný výběr, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytvoření</translation>
+        <translation type="vanished">Vyberte jeden nebo více předmětů, podržet &lt;b&gt;%1&lt;/b&gt; - pro vícenásobný výběr, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytvoření</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation>Vyberte jeden nebo více předmětů, podržet &lt;b&gt;%1&lt;/b&gt; - pro vícenásobný výběr, &lt;b&gt;Enter&lt;/b&gt; - potvrdit výběr</translation>
+        <translation type="vanished">Vyberte jeden nebo více předmětů, podržet &lt;b&gt;%1&lt;/b&gt; - pro vícenásobný výběr, &lt;b&gt;Enter&lt;/b&gt; - potvrdit výběr</translation>
     </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
@@ -8046,6 +8066,18 @@ Chcete uložit své změny?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8936,6 +8968,10 @@ Tato volba se projeví po opětovném spuštění.</translation>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation>Nelze spočítat zářez pro bod &apos;%1&apos; v dílu &apos;%2&apos;. Nelze opravit polohu zářezu.</translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8948,6 +8984,30 @@ Tato volba se projeví po opětovném spuštění.</translation>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Chyba</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Neplatný výsledek. Hodnota je nekonečná nebo NaN. Prověřte, prosím, své výpočty.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Hodnota nemůže být 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Hodnota nemůže být menší než 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10270,6 +10330,18 @@ Chcete uložit změny?</translation>
         <source>Intersection 2 (only right)</source>
         <translation>Průsečík 2 (pouze pravý)</translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10813,47 +10885,107 @@ Chcete uložit změny?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
-        <translation>Dopis</translation>
+        <translation type="vanished">Dopis</translation>
     </message>
     <message>
         <source>Legal</source>
-        <translation>Legal</translation>
+        <translation type="vanished">Legal</translation>
     </message>
     <message>
         <source>Roll 24in</source>
-        <translation>Role 24 palců</translation>
+        <translation type="vanished">Role 24 palců</translation>
     </message>
     <message>
         <source>Roll 30in</source>
-        <translation>Role 30 palců</translation>
+        <translation type="vanished">Role 30 palců</translation>
     </message>
     <message>
         <source>Roll 36in</source>
-        <translation>Role 36 palců</translation>
+        <translation type="vanished">Role 36 palců</translation>
     </message>
     <message>
         <source>Roll 42in</source>
-        <translation>Role 42 palců</translation>
+        <translation type="vanished">Role 42 palců</translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation>Role 44 palců</translation>
+        <translation type="vanished">Role 44 palců</translation>
     </message>
     <message>
         <source>Custom</source>
-        <translation>Vlastní</translation>
+        <translation type="vanished">Vlastní</translation>
     </message>
     <message>
         <source>Roll 48in</source>
-        <translation>Role 48 palců</translation>
+        <translation type="vanished">Role 48 palců</translation>
     </message>
     <message>
         <source>Roll 62in</source>
-        <translation>Role 62 palců</translation>
+        <translation type="vanished">Role 62 palců</translation>
     </message>
     <message>
         <source>Roll 72in</source>
-        <translation>Role 72 palců</translation>
+        <translation type="vanished">Role 72 palců</translation>
+    </message>
+    <message>
+        <source>Letter</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Dopis</translation>
+    </message>
+    <message>
+        <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Legal</translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Roll 24in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Role 24 palců</translation>
+    </message>
+    <message>
+        <source>Roll 30in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Role 30 palců</translation>
+    </message>
+    <message>
+        <source>Roll 36in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Role 36 palců</translation>
+    </message>
+    <message>
+        <source>Roll 42in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Role 42 palců</translation>
+    </message>
+    <message>
+        <source>Roll 44in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Role 44 palců</translation>
+    </message>
+    <message>
+        <source>Roll 48in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Role 48 palců</translation>
+    </message>
+    <message>
+        <source>Roll 62in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Role 62 palců</translation>
+    </message>
+    <message>
+        <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Role 72 palců</translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Vlastní</translation>
     </message>
 </context>
 <context>
@@ -12501,7 +12633,7 @@ Chcete uložit změny?</translation>
     </message>
     <message>
         <source>Point label</source>
-        <translation type="vanished">Štítek bodu</translation>
+        <translation type="vanished">Popis bodu</translation>
     </message>
     <message>
         <source>Position</source>
@@ -13167,6 +13299,10 @@ Chcete uložit změny?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14668,18 +14804,26 @@ Chcete uložit změny?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Cesta křivky&lt;/b&gt;: vyberte sedum nebo více bodů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
+        <translation type="vanished">&lt;b&gt;Cesta křivky&lt;/b&gt;: vyberte sedum nebo více bodů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Cesta křivky&lt;/b&gt;: vyberte více bodů pro celou část</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Průnik křivky a osy&lt;/b&gt;: úhel = %1°; &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
+        <translation type="vanished">&lt;b&gt;Průnik křivky a osy&lt;/b&gt;: úhel = %1°; &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14690,14 +14834,22 @@ Chcete uložit změny?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Bod ve vzdálenosti a úhlu&lt;/b&gt;: úhel = %1°, délka = %2%3; &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
+        <translation type="vanished">&lt;b&gt;Bod ve vzdálenosti a úhlu&lt;/b&gt;: úhel = %1°, délka = %2%3; &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Průnik čáry a osy&lt;/b&gt;: úhel = %1°; &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
+        <translation type="vanished">&lt;b&gt;Průnik čáry a osy&lt;/b&gt;: úhel = %1°; &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14708,25 +14860,41 @@ Chcete uložit změny?</translation>
     </message>
     <message>
         <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
-        <translation>Délka = %1%2, úhel = %3°, &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Klepnutí myši&lt;/b&gt; - dokončit výber polohy</translation>
+        <translation type="vanished">Délka = %1%2, úhel = %3°, &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Klepnutí myši&lt;/b&gt; - dokončit výber polohy</translation>
     </message>
     <message>
         <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
-        <translation>Délka = %1%2, úhel = %3°, úhel otočení = %4°, &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;%5&lt;/b&gt; - změnit původní bod otočení, &lt;b&gt;Klepnutí myši&lt;/b&gt; - dokončit vytváření</translation>
+        <translation type="vanished">Délka = %1%2, úhel = %3°, úhel otočení = %4°, &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;%5&lt;/b&gt; - změnit původní bod otočení, &lt;b&gt;Klepnutí myši&lt;/b&gt; - dokončit vytváření</translation>
+    </message>
+    <message>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Úhel otočení = %1°, &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Klepnutí myši&lt;/b&gt; - dokončit vytváření</translation>
+        <translation type="vanished">Úhel otočení = %1°, &lt;b&gt;Shift&lt;/b&gt; - přilnutí úhlů, &lt;b&gt;Klepnutí myši&lt;/b&gt; - dokončit vytváření</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Použít &lt;b&gt;Shift&lt;/b&gt;pro úhel otočení!</translation>
+        <translation type="vanished">Použít &lt;b&gt;Shift&lt;/b&gt;pro úhel otočení!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14737,11 +14905,19 @@ Chcete uložit změny?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Cesta křivky&lt;/b&gt;: vyberte tři nebo více bodů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
+        <translation type="vanished">&lt;b&gt;Cesta křivky&lt;/b&gt;: vyberte tři nebo více bodů, &lt;b&gt;Enter&lt;/b&gt; - dokončit vytváření</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Použít &lt;b&gt;Shift&lt;/b&gt;pro úhel otočení!</translation>
+        <translation type="vanished">Použít &lt;b&gt;Shift&lt;/b&gt;pro úhel otočení!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_de_DE.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Fehler</translation>
+        <translation type="vanished">Fehler</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radius kann nicht negativ sein</translation>
+        <translation type="vanished">Radius kann nicht negativ sein</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Länge kann nicht gleich 0 sein</translation>
+        <translation type="vanished">Länge kann nicht gleich 0 sein</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Fehler</translation>
+        <translation type="vanished">Fehler</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radius kann nicht negativ sein</translation>
+        <translation type="vanished">Radius kann nicht negativ sein</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4385,7 +4385,7 @@ Einstellungen trotzdem anwenden?</translation>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Hauptpfadobjekte auswählen, &lt;b&gt;Umschalttaste&lt;/b&gt; - Richtungskurve umkehren, &lt;b&gt;Eingabe&lt;/b&gt; - Erstellung beenden</translation>
+        <translation type="vanished">Hauptpfadobjekte auswählen, &lt;b&gt;Umschalttaste&lt;/b&gt; - Richtungskurve umkehren, &lt;b&gt;Eingabe&lt;/b&gt; - Erstellung beenden</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4599,6 +4599,22 @@ Einstellungen trotzdem anwenden?</translation>
         <source>Excluded</source>
         <translation>Ausgeschlossen</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">aktuelle Nahtzugabe</translation>
@@ -5522,7 +5538,7 @@ Einstellungen trotzdem anwenden?</translation>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Hauptpfadobjekte im Urzeigersinn auswählen, &lt;b&gt;Umschalttaste&lt;/b&gt; - Richtungskurve umkehren, &lt;b&gt;Eingabetaste&lt;/b&gt; - Erstellen abschließen</translation>
+        <translation type="vanished">Hauptpfadobjekte im Urzeigersinn auswählen, &lt;b&gt;Umschalttaste&lt;/b&gt; - Richtungskurve umkehren, &lt;b&gt;Eingabetaste&lt;/b&gt; - Erstellen abschließen</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5712,6 +5728,10 @@ Einstellungen trotzdem anwenden?</translation>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;leer&gt;</translation>
@@ -5979,11 +5999,11 @@ Einstellungen trotzdem anwenden?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Fehler</translation>
+        <translation type="vanished">Fehler</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Länge kann nicht negativ sein</translation>
+        <translation type="vanished">Länge kann nicht negativ sein</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6118,11 +6138,11 @@ Einstellungen trotzdem anwenden?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Fehler</translation>
+        <translation type="vanished">Fehler</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Länge kann nicht negativ sein</translation>
+        <translation type="vanished">Länge kann nicht negativ sein</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6171,23 +6191,23 @@ Einstellungen trotzdem anwenden?</translation>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Fehler</translation>
+        <translation type="vanished">Fehler</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Leeres Eingabefeld</translation>
+        <translation type="vanished">Leeres Eingabefeld</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Wert kann nicht 0 sein</translation>
+        <translation type="vanished">Wert kann nicht 0 sein</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Wert</translation>
+        <translation type="vanished">Wert</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Auswertungsfehler: %1</translation>
+        <translation type="vanished">Auswertungsfehler: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6243,11 +6263,11 @@ Einstellungen trotzdem anwenden?</translation>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Ungültiges Ergebnis. Wert ist unendlich oder keine Zahl (NaN). Bitte prüfen Sie Ihre Berechnungen.</translation>
+        <translation type="vanished">Ungültiges Ergebnis. Wert ist unendlich oder keine Zahl (NaN). Bitte prüfen Sie Ihre Berechnungen.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Wert kann nicht kleiner 0 sein</translation>
+        <translation type="vanished">Wert kann nicht kleiner 0 sein</translation>
     </message>
 </context>
 <context>
@@ -7749,7 +7769,7 @@ Sollen die Änderungen gespeichert werden?</translation>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Pfadobjekte auswählen, &lt;b&gt;Umschalttaste&lt;/b&gt; - Richtungskurve umkehren</translation>
+        <translation type="vanished">Pfadobjekte auswählen, &lt;b&gt;Umschalttaste&lt;/b&gt; - Richtungskurve umkehren</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7855,14 +7875,6 @@ Sollen die Änderungen gespeichert werden?</translation>
         <source>Forum</source>
         <translation>Forum</translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation type="unfinished"></translation>
@@ -8039,6 +8051,18 @@ Sollen die Änderungen gespeichert werden?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8916,6 +8940,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8928,6 +8956,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Fehler</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Ungültiges Ergebnis. Wert ist unendlich oder keine Zahl (NaN). Bitte prüfen Sie Ihre Berechnungen.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Wert kann nicht 0 sein</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Wert kann nicht kleiner 0 sein</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10226,6 +10278,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation>Überschneidung 2 (nur rechts)</translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10758,48 +10822,64 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Letter (US-Papiergröße)</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Legal (US-Papiergröße)</translation>
     </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolle 24 Zoll</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolle 30 Zoll</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolle 36 Zoll</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolle 42 Zoll</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolle 44 Zoll</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished">Benutzerdefiniert</translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolle 44 Zoll {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolle 44 Zoll {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolle 44 Zoll {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Benutzerdefiniert</translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -13063,6 +13143,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14560,18 +14644,26 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Gekrümmter Pfad&lt;/b&gt;: sieben oder mehr Punkte auswählen, &lt;b&gt;Enter&lt;/b&gt; - fertigstellen</translation>
+        <translation type="vanished">&lt;b&gt;Gekrümmter Pfad&lt;/b&gt;: sieben oder mehr Punkte auswählen, &lt;b&gt;Enter&lt;/b&gt; - fertigstellen</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Gekrümmter Pfad&lt;/b&gt;: mehr Punkte für das gesamte Segment auswählen</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Laufender Schnittpunkt auf Kurve&lt;/b&gt;: Winkel = %1°; &lt;b&gt;Shift&lt;/b&gt; - Winkel einrasten, &lt;b&gt;Enter&lt;/b&gt; - fertigstellen</translation>
+        <translation type="vanished">&lt;b&gt;Laufender Schnittpunkt auf Kurve&lt;/b&gt;: Winkel = %1°; &lt;b&gt;Shift&lt;/b&gt; - Winkel einrasten, &lt;b&gt;Enter&lt;/b&gt; - fertigstellen</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14582,38 +14674,46 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Punkt mit Abstand und Winkel&lt;/b&gt;: Winkel = %1°; Länge = %2%3; &lt;b&gt;Shift&lt;/b&gt; - Winkel einrasten, &lt;b&gt;Enter&lt;/b&gt; - fertigstellen</translation>
+        <translation type="vanished">&lt;b&gt;Punkt mit Abstand und Winkel&lt;/b&gt;: Winkel = %1°; Länge = %2%3; &lt;b&gt;Shift&lt;/b&gt; - Winkel einrasten, &lt;b&gt;Enter&lt;/b&gt; - fertigstellen</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Laufender Schnittpunkt auf Linie&lt;/b&gt;: Winkel = %1°; &lt;b&gt;Shift&lt;/b&gt; - Winkel einrasten, &lt;b&gt;Enter&lt;/b&gt; - fertigstellen</translation>
+        <translation type="vanished">&lt;b&gt;Laufender Schnittpunkt auf Linie&lt;/b&gt;: Winkel = %1°; &lt;b&gt;Shift&lt;/b&gt; - Winkel einrasten, &lt;b&gt;Enter&lt;/b&gt; - fertigstellen</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolMove</name>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
-        <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14625,10 +14725,14 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Gekrümmter Pfad&lt;/b&gt;: drei oder mehr Punkte auswählen, &lt;b&gt;Enter&lt;/b&gt; zum Fertigstellen drücken</translation>
+        <translation type="vanished">&lt;b&gt;Gekrümmter Pfad&lt;/b&gt;: drei oder mehr Punkte auswählen, &lt;b&gt;Enter&lt;/b&gt; zum Fertigstellen drücken</translation>
     </message>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>

share/translations/valentina_el_GR.ts

@@ -725,15 +725,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Σφάλμα</translation>
+        <translation type="vanished">Σφάλμα</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Η τιμή της ακτίνας δε μπορεί να είναι αρνητική</translation>
+        <translation type="vanished">Η τιμή της ακτίνας δε μπορεί να είναι αρνητική</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Το μήκος δεν μπορεί να ισουται με 0</translation>
+        <translation type="vanished">Το μήκος δεν μπορεί να ισουται με 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2062,11 +2062,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Σφάλμα</translation>
+        <translation type="vanished">Σφάλμα</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Η τιμή της ακτίνας δε μπορεί να είναι αρνητική</translation>
+        <translation type="vanished">Η τιμή της ακτίνας δε μπορεί να είναι αρνητική</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4299,10 +4299,6 @@ Apply settings anyway?</source>
         <source>Angle:</source>
         <translation>Γωνία:</translation>
     </message>
-    <message>
-        <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation>Αντιστροφή</translation>
@@ -4515,6 +4511,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation>Εξαιρούμενο</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Τρέχων περιθώριο ραφής</translation>
@@ -5432,10 +5444,6 @@ Apply settings anyway?</source>
         <source>Grainline</source>
         <translation>Γραμμή ισιάδας</translation>
     </message>
-    <message>
-        <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation>Αντιστροφή</translation>
@@ -5624,6 +5632,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;Empty&gt;</translation>
@@ -5891,11 +5903,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Σφάλμα</translation>
+        <translation type="vanished">Σφάλμα</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Το μήκος δεν είναι δυνατό να έχει αρνητική τιμή</translation>
+        <translation type="vanished">Το μήκος δεν είναι δυνατό να έχει αρνητική τιμή</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6030,11 +6042,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Σφάλμα</translation>
+        <translation type="vanished">Σφάλμα</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Το μήκος δεν είναι δυνατό να έχει αρνητική τιμή</translation>
+        <translation type="vanished">Το μήκος δεν είναι δυνατό να έχει αρνητική τιμή</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6083,23 +6095,19 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Σφάλμα</translation>
+        <translation type="vanished">Σφάλμα</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Κενό πεδίο</translation>
+        <translation type="vanished">Κενό πεδίο</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Η τιμή δεν μπορεί να είναι 0</translation>
+        <translation type="vanished">Η τιμή δεν μπορεί να είναι 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Τιμή</translation>
+        <translation type="vanished">Τιμή</translation>
-    </message>
-    <message>
-        <source>Parser error: %1</source>
-        <translation type="unfinished"></translation>
     </message>
     <message>
         <source>First point</source>
@@ -6155,11 +6163,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Μη έγκυρο αποτέλεσμα. Η τιμή είναι άπειρη ή NaN. Παρακαλώ, ελέγξτε τους υπολογισμούς σας.</translation>
+        <translation type="vanished">Μη έγκυρο αποτέλεσμα. Η τιμή είναι άπειρη ή NaN. Παρακαλώ, ελέγξτε τους υπολογισμούς σας.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Η τιμή δεν μπορεί να είναι λιγότερο από 0</translation>
+        <translation type="vanished">Η τιμή δεν μπορεί να είναι λιγότερο από 0</translation>
     </message>
 </context>
 <context>
@@ -7627,10 +7635,6 @@ Do you want to save your changes?</source>
         <source>Select main path objects clockwise.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>The document has no write permissions.</source>
         <translation type="unfinished"></translation>
@@ -7735,14 +7739,6 @@ Do you want to save your changes?</source>
         <source>Forum</source>
         <translation>Φόρουμ</translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation>Ανοίξτε την εφαρμογή Tape για δημιουργία ή διόρθωση του αρχείου μετρήσεων</translation>
@@ -7919,6 +7915,18 @@ Do you want to save your changes?</source>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8749,6 +8757,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8761,6 +8773,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Σφάλμα</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Μη έγκυρο αποτέλεσμα. Η τιμή είναι άπειρη ή NaN. Παρακαλώ, ελέγξτε τους υπολογισμούς σας.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Η τιμή δεν μπορεί να είναι 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Η τιμή δεν μπορεί να είναι λιγότερο από 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QmuParser</name>
@@ -10025,6 +10061,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10545,48 +10593,64 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Letter</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Legal</translation>
     </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Ρολό 24 ιντσών</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Ρολό 30 ιντσών</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Ρολό 36 ιντσών</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Ρολό 42 ιντσών</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Ρολό 44 ιντσών</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished">Προσαρμογή</translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Ρολό 44 ιντσών {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Ρολό 44 ιντσών {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Ρολό 44 ιντσών {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Προσαρμογή</translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -12745,6 +12809,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14168,18 +14236,26 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Μονοπάτι καμπύλης&lt;/b&gt;: επιλέξτε επτά ή περισσότερα σημεία, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
+        <translation type="vanished">&lt;b&gt;Μονοπάτι καμπύλης&lt;/b&gt;: επιλέξτε επτά ή περισσότερα σημεία, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Μονοπάτι καμπύλης&lt;/b&gt;: επιλέξτε περισσότερα σημεία για ολοκληρωμενο τμήμα</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Τομή καμπύλης και άξονα&lt;/b&gt;: γωνία = %1°; &lt;b&gt;Shift&lt;/b&gt; - σταθεροποίηση γωνίας, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
+        <translation type="vanished">&lt;b&gt;Τομή καμπύλης και άξονα&lt;/b&gt;: γωνία = %1°; &lt;b&gt;Shift&lt;/b&gt; - σταθεροποίηση γωνίας, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14190,14 +14266,22 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Σημείο σε απόσταση και γωνία&lt;/b&gt;: γωνία = %1°, μήκος = %2%3; &lt;b&gt;Shift&lt;/b&gt; - σταθεροποίηση γωνίας, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
+        <translation type="vanished">&lt;b&gt;Σημείο σε απόσταση και γωνία&lt;/b&gt;: γωνία = %1°, μήκος = %2%3; &lt;b&gt;Shift&lt;/b&gt; - σταθεροποίηση γωνίας, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Τομή γραμμής και άξονα&lt;/b&gt;: γωνία = %1°; &lt;b&gt;Shift&lt;/b&gt; - σταθεροποίηση γωνίας, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
+        <translation type="vanished">&lt;b&gt;Τομή γραμμής και άξονα&lt;/b&gt;: γωνία = %1°; &lt;b&gt;Shift&lt;/b&gt; - σταθεροποίηση γωνίας, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14207,11 +14291,11 @@ Do you want to save your changes?</source>
         <translation type="vanished">Μήκος = %1%2, γωνία = %3°, &lt;b&gt;Shift&lt;/b&gt; - σταθεροποίηση γωνίας, &lt;b&gt;κλικ ποντικιού&lt;/b&gt; - τέλος δημιουργίας</translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14219,14 +14303,22 @@ Do you want to save your changes?</source>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Γωνία περιστροφής = %1°, &lt;b&gt;Shift&lt;/b&gt; - σταθεροποίηση γωνίας, &lt;b&gt;κλικ ποντικιού&lt;/b&gt; - τέλος δημιουργίας</translation>
+        <translation type="vanished">Γωνία περιστροφής = %1°, &lt;b&gt;Shift&lt;/b&gt; - σταθεροποίηση γωνίας, &lt;b&gt;κλικ ποντικιού&lt;/b&gt; - τέλος δημιουργίας</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Χρησιμοποιήστε &lt;b&gt;Shift&lt;/b&gt; για σταθεροποίηση της γωνίας!</translation>
+        <translation type="vanished">Χρησιμοποιήστε &lt;b&gt;Shift&lt;/b&gt; για σταθεροποίηση της γωνίας!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14237,11 +14329,19 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Μονοπάτι καμπύλης&lt;/b&gt;: επιλέξτε τρία ή περισσότερα σημεία, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
+        <translation type="vanished">&lt;b&gt;Μονοπάτι καμπύλης&lt;/b&gt;: επιλέξτε τρία ή περισσότερα σημεία, &lt;b&gt;Enter&lt;/b&gt; - τέλος δημιουργίας</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Χρησιμοποιήστε &lt;b&gt;Shift&lt;/b&gt; για σταθεροποίηση της γωνίας!</translation>
+        <translation type="vanished">Χρησιμοποιήστε &lt;b&gt;Shift&lt;/b&gt; για σταθεροποίηση της γωνίας!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_en_CA.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radius can&apos;t be negative</translation>
+        <translation type="vanished">Radius can&apos;t be negative</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Length can&apos;t be equal 0</translation>
+        <translation type="vanished">Length can&apos;t be equal 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radius can&apos;t be negative</translation>
+        <translation type="vanished">Radius can&apos;t be negative</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4384,7 +4384,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4598,6 +4598,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation>Excluded</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Current seam allowance</translation>
@@ -5521,7 +5537,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5711,6 +5727,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;Empty&gt;</translation>
@@ -5978,11 +5998,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Length can&apos;t be negative</translation>
+        <translation type="vanished">Length can&apos;t be negative</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6117,11 +6137,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Length can&apos;t be negative</translation>
+        <translation type="vanished">Length can&apos;t be negative</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6170,23 +6190,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Empty field</translation>
+        <translation type="vanished">Empty field</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Value can&apos;t be 0</translation>
+        <translation type="vanished">Value can&apos;t be 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Value</translation>
+        <translation type="vanished">Value</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Parser error: %1</translation>
+        <translation type="vanished">Parser error: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6242,11 +6262,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Invalid result. Value is infinite or NaN. Please, check your calculations.</translation>
+        <translation type="vanished">Invalid result. Value is infinite or NaN. Please, check your calculations.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Value can&apos;t be less than 0</translation>
+        <translation type="vanished">Value can&apos;t be less than 0</translation>
     </message>
 </context>
 <context>
@@ -7748,7 +7768,7 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</translation>
+        <translation type="vanished">Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7856,11 +7876,11 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</translation>
+        <translation type="vanished">Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</translation>
     </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
@@ -8038,6 +8058,18 @@ Do you want to save your changes?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8927,6 +8959,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8939,6 +8975,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Error</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Invalid result. Value is infinite or NaN. Please, check your calculations.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Value can&apos;t be 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Value can&apos;t be less than 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Parser error: %1</translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10249,6 +10309,18 @@ Do you want to save your changes?</translation>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10792,48 +10864,64 @@ Do you want to save your changes?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Letter</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Legal</translation>
     </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 24in</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 30in</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 36in</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 42in</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished">Custom</translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Custom</translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -13146,6 +13234,10 @@ Do you want to save your changes?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14647,18 +14739,26 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14669,14 +14769,22 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14686,11 +14794,11 @@ Do you want to save your changes?</translation>
         <translation type="vanished">Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14698,14 +14806,22 @@ Do you want to save your changes?</translation>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+        <translation type="vanished">Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14716,11 +14832,19 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+        <translation type="vanished">Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_en_IN.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radius can&apos;t be negative</translation>
+        <translation type="vanished">Radius can&apos;t be negative</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Length can&apos;t be equal 0</translation>
+        <translation type="vanished">Length can&apos;t be equal 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radius can&apos;t be negative</translation>
+        <translation type="vanished">Radius can&apos;t be negative</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4384,7 +4384,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4598,6 +4598,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation>Excluded</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Current seam allowance</translation>
@@ -5521,7 +5537,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5711,6 +5727,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;Empty&gt;</translation>
@@ -5978,11 +5998,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Length can&apos;t be negative</translation>
+        <translation type="vanished">Length can&apos;t be negative</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6117,11 +6137,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Length can&apos;t be negative</translation>
+        <translation type="vanished">Length can&apos;t be negative</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6170,23 +6190,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Empty field</translation>
+        <translation type="vanished">Empty field</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Value can&apos;t be 0</translation>
+        <translation type="vanished">Value can&apos;t be 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Value</translation>
+        <translation type="vanished">Value</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Parser error: %1</translation>
+        <translation type="vanished">Parser error: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6242,11 +6262,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Invalid result. Value is infinite or NaN. Please, check your calculations.</translation>
+        <translation type="vanished">Invalid result. Value is infinite or NaN. Please, check your calculations.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Value can&apos;t be less than 0</translation>
+        <translation type="vanished">Value can&apos;t be less than 0</translation>
     </message>
 </context>
 <context>
@@ -7748,7 +7768,7 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</translation>
+        <translation type="vanished">Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7856,11 +7876,11 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</translation>
+        <translation type="vanished">Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</translation>
     </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
@@ -8038,6 +8058,18 @@ Do you want to save your changes?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8927,6 +8959,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8939,6 +8975,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Error</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Invalid result. Value is infinite or NaN. Please, check your calculations.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Value can&apos;t be 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Value can&apos;t be less than 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Parser error: %1</translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10249,6 +10309,18 @@ Do you want to save your changes?</translation>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10792,48 +10864,64 @@ Do you want to save your changes?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Letter</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Legal</translation>
     </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 24in</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 30in</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 36in</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 42in</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished">Custom</translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Custom</translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -13146,6 +13234,10 @@ Do you want to save your changes?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14647,18 +14739,26 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14669,14 +14769,22 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14686,11 +14794,11 @@ Do you want to save your changes?</translation>
         <translation type="vanished">Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14698,14 +14806,22 @@ Do you want to save your changes?</translation>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+        <translation type="vanished">Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14716,11 +14832,19 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+        <translation type="vanished">Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_en_US.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radius can&apos;t be negative</translation>
+        <translation type="vanished">Radius can&apos;t be negative</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Length can&apos;t be equal 0</translation>
+        <translation type="vanished">Length can&apos;t be equal 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radius can&apos;t be negative</translation>
+        <translation type="vanished">Radius can&apos;t be negative</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4384,7 +4384,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4598,6 +4598,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation>Excluded</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Current seam allowance</translation>
@@ -5521,7 +5537,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5711,6 +5727,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;Empty&gt;</translation>
@@ -5978,11 +5998,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Length can&apos;t be negative</translation>
+        <translation type="vanished">Length can&apos;t be negative</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6117,11 +6137,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Length can&apos;t be negative</translation>
+        <translation type="vanished">Length can&apos;t be negative</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6170,23 +6190,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Empty field</translation>
+        <translation type="vanished">Empty field</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Value can&apos;t be 0</translation>
+        <translation type="vanished">Value can&apos;t be 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Value</translation>
+        <translation type="vanished">Value</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Parser error: %1</translation>
+        <translation type="vanished">Parser error: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6242,11 +6262,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Invalid result. Value is infinite or NaN. Please, check your calculations.</translation>
+        <translation type="vanished">Invalid result. Value is infinite or NaN. Please, check your calculations.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Value can&apos;t be less than 0</translation>
+        <translation type="vanished">Value can&apos;t be less than 0</translation>
     </message>
 </context>
 <context>
@@ -7748,7 +7768,7 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</translation>
+        <translation type="vanished">Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7856,11 +7876,11 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</translation>
+        <translation type="vanished">Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</translation>
     </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
@@ -8038,6 +8058,18 @@ Do you want to save your changes?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8927,6 +8959,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8939,6 +8975,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Error</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Invalid result. Value is infinite or NaN. Please, check your calculations.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Value can&apos;t be 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Value can&apos;t be less than 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Parser error: %1</translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10249,6 +10309,18 @@ Do you want to save your changes?</translation>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10792,48 +10864,64 @@ Do you want to save your changes?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Letter</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Legal</translation>
     </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 24in</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 30in</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 36in</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 42in</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished">Custom</translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roll 44in {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Custom</translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -13146,6 +13234,10 @@ Do you want to save your changes?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14647,18 +14739,26 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14669,14 +14769,22 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14686,11 +14794,11 @@ Do you want to save your changes?</translation>
         <translation type="vanished">Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14698,14 +14806,22 @@ Do you want to save your changes?</translation>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+        <translation type="vanished">Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14716,11 +14832,19 @@ Do you want to save your changes?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
+        <translation type="vanished">&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+        <translation type="vanished">Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_es_ES.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Radio no puede ser negativo</translation>
+        <translation type="vanished">Radio no puede ser negativo</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Longitud no puede ser 0</translation>
+        <translation type="vanished">Longitud no puede ser 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>El radio no puede ser negativo</translation>
+        <translation type="vanished">El radio no puede ser negativo</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4385,7 +4385,7 @@ Aplicar características de todos modos?</translation>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Seleccionar objetos de trayecto principal, &lt;b&gt;Mayúsculas&lt;/b&gt; - curva de sentido inverso, &lt;b&gt;Intro&lt;/b&gt; - finalizar creación</translation>
+        <translation type="vanished">Seleccionar objetos de trayecto principal, &lt;b&gt;Mayúsculas&lt;/b&gt; - curva de sentido inverso, &lt;b&gt;Intro&lt;/b&gt; - finalizar creación</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4599,6 +4599,22 @@ Aplicar características de todos modos?</translation>
         <source>Excluded</source>
         <translation>Excluido</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished"></translation>
@@ -5522,7 +5538,7 @@ Aplicar características de todos modos?</translation>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Selecionar objetos principales del trayecto, &lt;b&gt;Mayúsculas&lt;/b&gt; - curva de sentido inverso, &lt;b&gt;Intro&lt;/b&gt; - finalizar creación</translation>
+        <translation type="vanished">Selecionar objetos principales del trayecto, &lt;b&gt;Mayúsculas&lt;/b&gt; - curva de sentido inverso, &lt;b&gt;Intro&lt;/b&gt; - finalizar creación</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5712,6 +5728,10 @@ Aplicar características de todos modos?</translation>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation>Para abrir todas las características de detalles complete creando la ruta principal, Por favor, presione OK.</translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished"></translation>
@@ -5979,11 +5999,11 @@ Aplicar características de todos modos?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Longitud no puede ser negativa</translation>
+        <translation type="vanished">Longitud no puede ser negativa</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6118,11 +6138,11 @@ Aplicar características de todos modos?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Longitud no puede ser negativa</translation>
+        <translation type="vanished">Longitud no puede ser negativa</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6171,23 +6191,23 @@ Aplicar características de todos modos?</translation>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Error</translation>
+        <translation type="vanished">Error</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Campo vacío</translation>
+        <translation type="vanished">Campo vacío</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>El valor no puede ser 0</translation>
+        <translation type="vanished">El valor no puede ser 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Valor</translation>
+        <translation type="vanished">Valor</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Error en análisis: %1</translation>
+        <translation type="vanished">Error en análisis: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6243,11 +6263,11 @@ Aplicar características de todos modos?</translation>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Resultado inválido. El valor es infinito o no es un número. Por favor, revise sus cálculos.</translation>
+        <translation type="vanished">Resultado inválido. El valor es infinito o no es un número. Por favor, revise sus cálculos.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>El valor no puede ser menos que 0</translation>
+        <translation type="vanished">El valor no puede ser menos que 0</translation>
     </message>
 </context>
 <context>
@@ -7750,7 +7770,7 @@ el patrón.</translation>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Seleccionar los objetos de la ruta, &lt;b&gt;Mayúscula&lt;/b&gt; - curva de sentido inverso</translation>
+        <translation type="vanished">Seleccionar los objetos de la ruta, &lt;b&gt;Mayúscula&lt;/b&gt; - curva de sentido inverso</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7858,11 +7878,11 @@ el patrón.</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Seleccione uno o mas objetos, presionar &lt;b&gt;%1&lt;/b&gt; - para selección múltiple, &lt;b&gt;Entrar&lt;/b&gt; - terminar creación</translation>
+        <translation type="vanished">Seleccione uno o mas objetos, presionar &lt;b&gt;%1&lt;/b&gt; - para selección múltiple, &lt;b&gt;Entrar&lt;/b&gt; - terminar creación</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation>Seleccione uno o mas objetos, presionar &lt;b&gt;%1&lt;/b&gt; - para selección múltiple, &lt;b&gt;Entrar&lt;/b&gt; - confirmar creación</translation>
+        <translation type="vanished">Seleccione uno o mas objetos, presionar &lt;b&gt;%1&lt;/b&gt; - para selección múltiple, &lt;b&gt;Entrar&lt;/b&gt; - confirmar creación</translation>
     </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
@@ -8044,6 +8064,18 @@ el patrón.</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8934,6 +8966,10 @@ Esta opción surtirá efecto después de reiniciar.</translation>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation>No se puede calcular un pique para un punto &apos;%1&apos; en pieza &apos;%2&apos;. Imposible reparar una posición de pique.</translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8946,6 +8982,30 @@ Esta opción surtirá efecto después de reiniciar.</translation>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Error</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Resultado inválido. El valor es infinito o no es un número. Por favor, revise sus cálculos.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">El valor no puede ser 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">El valor no puede ser menos que 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Error en análisis: %1</translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10268,6 +10328,18 @@ Quieres guardar los cambios?</translation>
         <source>Intersection 2 (only right)</source>
         <translation>Intersección 2 ( solamente derecho)</translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10811,47 +10883,107 @@ Quieres guardar los cambios?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
-        <translation>Carta</translation>
+        <translation type="vanished">Carta</translation>
     </message>
     <message>
         <source>Legal</source>
-        <translation>Legal</translation>
+        <translation type="vanished">Legal</translation>
     </message>
     <message>
         <source>Roll 24in</source>
-        <translation>Rollo 24 pulg</translation>
+        <translation type="vanished">Rollo 24 pulg</translation>
     </message>
     <message>
         <source>Roll 30in</source>
-        <translation>Rollo 30 pulg</translation>
+        <translation type="vanished">Rollo 30 pulg</translation>
     </message>
     <message>
         <source>Roll 36in</source>
-        <translation>Rollo 36 pulg</translation>
+        <translation type="vanished">Rollo 36 pulg</translation>
     </message>
     <message>
         <source>Roll 42in</source>
-        <translation>Rollo 42 pulg</translation>
+        <translation type="vanished">Rollo 42 pulg</translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation>Rollo 44 pulg</translation>
+        <translation type="vanished">Rollo 44 pulg</translation>
     </message>
     <message>
         <source>Custom</source>
-        <translation>Personalizado</translation>
+        <translation type="vanished">Personalizado</translation>
     </message>
     <message>
         <source>Roll 48in</source>
-        <translation>Rollo 44 pulg {48 i?}</translation>
+        <translation type="vanished">Rollo 44 pulg {48 i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
-        <translation>Rollo 44 pulg {62i?}</translation>
+        <translation type="vanished">Rollo 44 pulg {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
-        <translation>Rollo 44 pulg {72i?}</translation>
+        <translation type="vanished">Rollo 44 pulg {72i?}</translation>
+    </message>
+    <message>
+        <source>Letter</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Legal</translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Roll 24in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rollo 44 pulg {72i?} {24i?}</translation>
+    </message>
+    <message>
+        <source>Roll 30in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rollo 44 pulg {72i?} {30i?}</translation>
+    </message>
+    <message>
+        <source>Roll 36in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rollo 44 pulg {72i?} {36i?}</translation>
+    </message>
+    <message>
+        <source>Roll 42in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rollo 44 pulg {72i?} {42i?}</translation>
+    </message>
+    <message>
+        <source>Roll 44in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rollo 44 pulg {72i?} {44i?}</translation>
+    </message>
+    <message>
+        <source>Roll 48in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rollo 44 pulg {48 i?}</translation>
+    </message>
+    <message>
+        <source>Roll 62in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rollo 44 pulg {62i?}</translation>
+    </message>
+    <message>
+        <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rollo 44 pulg {72i?}</translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -13165,6 +13297,10 @@ Quieres guardar los cambios?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14666,18 +14802,26 @@ Quieres guardar los cambios?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Ruta curvada&lt;/b&gt;: seleccione siete o más puntos, &lt;b&gt;Enter&lt;/b&gt; - terminar la creación</translation>
+        <translation type="vanished">&lt;b&gt;Ruta curvada&lt;/b&gt;: seleccione siete o más puntos, &lt;b&gt;Enter&lt;/b&gt; - terminar la creación</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Camino curvado&lt;/b&gt;: selecciona más puntos para completar el segmento</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Interseccion entre curva y eje&lt;/b&gt;: angulo= %1°; &lt;b&gt;Desplazamiento&lt;/b&gt; - ángulo de adherencia, &lt;b&gt;Enter&lt;/b&gt; - termina la creación</translation>
+        <translation type="vanished">&lt;b&gt;Interseccion entre curva y eje&lt;/b&gt;: angulo= %1°; &lt;b&gt;Desplazamiento&lt;/b&gt; - ángulo de adherencia, &lt;b&gt;Enter&lt;/b&gt; - termina la creación</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14688,14 +14832,22 @@ Quieres guardar los cambios?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Sleccionar en distancia y ángulo&lt;/b&gt;: ángulo = %1°, longitud = %2%3; &lt;b&gt;Shift&lt;/b&gt; - crear ángulo, &lt;b&gt;Intro&lt;/b&gt; - terminar creación</translation>
+        <translation type="vanished">&lt;b&gt;Sleccionar en distancia y ángulo&lt;/b&gt;: ángulo = %1°, longitud = %2%3; &lt;b&gt;Shift&lt;/b&gt; - crear ángulo, &lt;b&gt;Intro&lt;/b&gt; - terminar creación</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Interseccion entre línea y eje&lt;/b&gt;: angulo= %1°; &lt;b&gt;Desplazamiento&lt;/b&gt; - ángulo de adherencia, &lt;b&gt;Enter&lt;/b&gt; - termina la creación</translation>
+        <translation type="vanished">&lt;b&gt;Interseccion entre línea y eje&lt;/b&gt;: angulo= %1°; &lt;b&gt;Desplazamiento&lt;/b&gt; - ángulo de adherencia, &lt;b&gt;Enter&lt;/b&gt; - termina la creación</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14706,25 +14858,41 @@ Quieres guardar los cambios?</translation>
     </message>
     <message>
         <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
-        <translation>Longitud = %1%2, angulo = %3°, &lt;b&gt;Cambio&lt;/b&gt; - angulo de pegado, &lt;b&gt;Dar clic Mouse&lt;/b&gt; - terminar seleccionando una posición</translation>
+        <translation type="vanished">Longitud = %1%2, angulo = %3°, &lt;b&gt;Cambio&lt;/b&gt; - angulo de pegado, &lt;b&gt;Dar clic Mouse&lt;/b&gt; - terminar seleccionando una posición</translation>
     </message>
     <message>
         <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
-        <translation>Longitud = %1%2, ángulo = %3°, ángulo rotación = %4°, &lt;b&gt;Cambio&lt;/b&gt; - angulo de pegado, &lt;b&gt;%5&lt;/b&gt; - cambio de punto de origen de rotacion, &lt;b&gt;Dar clic al Mouse&lt;/b&gt; - terminar creando</translation>
+        <translation type="vanished">Longitud = %1%2, ángulo = %3°, ángulo rotación = %4°, &lt;b&gt;Cambio&lt;/b&gt; - angulo de pegado, &lt;b&gt;%5&lt;/b&gt; - cambio de punto de origen de rotacion, &lt;b&gt;Dar clic al Mouse&lt;/b&gt; - terminar creando</translation>
+    </message>
+    <message>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Rotar ángulo = %1°, &lt;b&gt;Shift&lt;/b&gt; - crear ángulo, &lt;b&gt;Click de ratón&lt;/b&gt; - terminar creación</translation>
+        <translation type="vanished">Rotar ángulo = %1°, &lt;b&gt;Shift&lt;/b&gt; - crear ángulo, &lt;b&gt;Click de ratón&lt;/b&gt; - terminar creación</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>¡Usar &lt;b&gt;Shift&lt;/b&gt; para crear ángulo!</translation>
+        <translation type="vanished">¡Usar &lt;b&gt;Shift&lt;/b&gt; para crear ángulo!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14735,11 +14903,19 @@ Quieres guardar los cambios?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Ruta curvada&lt;/b&gt;: seleccione tres o mas puntos, &lt;b&gt;Enter&lt;/b&gt; - termina la creación</translation>
+        <translation type="vanished">&lt;b&gt;Ruta curvada&lt;/b&gt;: seleccione tres o mas puntos, &lt;b&gt;Enter&lt;/b&gt; - termina la creación</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>¡Usar &lt;b&gt;Shift&lt;/b&gt; para crear ángulo!</translation>
+        <translation type="vanished">¡Usar &lt;b&gt;Shift&lt;/b&gt; para crear ángulo!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_fi_FI.ts

@@ -609,15 +609,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Virhe</translation>
+        <translation type="vanished">Virhe</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Säde ei voi olla negatiivinen</translation>
+        <translation type="vanished">Säde ei voi olla negatiivinen</translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be equal 0</source>
-        <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -1732,14 +1728,6 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">Virhe</translation>
-    </message>
-    <message>
-        <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished">Säde ei voi olla negatiivinen</translation>
-    </message>
     <message>
         <source>Edit radius1</source>
         <translation type="unfinished"></translation>
@@ -3835,10 +3823,6 @@ Apply settings anyway?</source>
         <source>Angle:</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished">Käännä päinvastoin</translation>
@@ -4047,6 +4031,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished"></translation>
@@ -4872,10 +4872,6 @@ Apply settings anyway?</source>
         <source>Grainline</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished">Käännä päinvastoin</translation>
@@ -5064,6 +5060,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished"></translation>
@@ -5317,14 +5317,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">Virhe</translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
@@ -5444,14 +5436,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">Virhe</translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Not used</source>
         <translation type="unfinished"></translation>
@@ -5499,23 +5483,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Virhe</translation>
+        <translation type="vanished">Virhe</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Tyhjä sarake</translation>
+        <translation type="vanished">Tyhjä sarake</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Arvo ei voi olla 0</translation>
+        <translation type="vanished">Arvo ei voi olla 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Arvo</translation>
+        <translation type="vanished">Arvo</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Jäsentämis virhe: %1</translation>
+        <translation type="vanished">Jäsentämis virhe: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -5565,14 +5549,6 @@ Apply settings anyway?</source>
         <source>by second edge right angle</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be less than 0</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>DialogTriangle</name>
@@ -6878,10 +6854,6 @@ Haluatko tallentaa muutokset?</translation>
         <source>Select main path objects clockwise.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>The document has no write permissions.</source>
         <translation type="unfinished"></translation>
@@ -6986,14 +6958,6 @@ Haluatko tallentaa muutokset?</translation>
         <source>Forum</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation type="unfinished"></translation>
@@ -7170,6 +7134,18 @@ Haluatko tallentaa muutokset?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -7925,6 +7901,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -7937,6 +7917,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Virhe</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Arvo ei voi olla 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Jäsentämis virhe: %1</translation>
+    </message>
 </context>
 <context>
     <name>QmuParser</name>
@@ -9109,6 +9113,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -9597,46 +9613,62 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation type="unfinished"></translation>
+        <comment>Paper format</comment>
-    </message>
-    <message>
-        <source>Custom</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -11692,6 +11724,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -13149,11 +13185,11 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -13161,7 +13197,11 @@ Do you want to save your changes?</source>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Leikkauskäyrä ja akseli&lt;/b&gt;: kulma = %1°; &lt;b&gt;Siirto&lt;/b&gt; - kulma, &lt;b&gt;Enter&lt;/b&gt; - Hyväksy luonti</translation>
+        <translation type="vanished">&lt;b&gt;Leikkauskäyrä ja akseli&lt;/b&gt;: kulma = %1°; &lt;b&gt;Siirto&lt;/b&gt; - kulma, &lt;b&gt;Enter&lt;/b&gt; - Hyväksy luonti</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -13171,7 +13211,7 @@ Do you want to save your changes?</source>
         <translation type="vanished">&lt;b&gt;Piste etäisyydellä ja kulmassa&lt;/b&gt;: kulma = %1°; &lt;b&gt;Siirto&lt;/b&gt; - kulma, &lt;b&gt;Enter&lt;/b&gt; - Hyväksy luonti</translation>
     </message>
     <message>
-        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -13179,31 +13219,35 @@ Do you want to save your changes?</source>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Leikkausviiva ja akseli&lt;/b&gt;: kulma = %1°; &lt;b&gt;Siirto&lt;/b&gt; - kulma, &lt;b&gt;Enter&lt;/b&gt; - Hyväksy luonti</translation>
+        <translation type="vanished">&lt;b&gt;Leikkausviiva ja akseli&lt;/b&gt;: kulma = %1°; &lt;b&gt;Siirto&lt;/b&gt; - kulma, &lt;b&gt;Enter&lt;/b&gt; - Hyväksy luonti</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolMove</name>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
-        <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -13215,10 +13259,14 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Käyräpolku&lt;/b&gt;: Valitse ainakin kolme pistettä, &lt;b&gt;Enter&lt;/b&gt; - Hyväksy luonti</translation>
+        <translation type="vanished">&lt;b&gt;Käyräpolku&lt;/b&gt;: Valitse ainakin kolme pistettä, &lt;b&gt;Enter&lt;/b&gt; - Hyväksy luonti</translation>
     </message>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>

share/translations/valentina_fr_FR.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Erreur</translation>
+        <translation type="vanished">Erreur</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Le rayon ne peut pas être négatif</translation>
+        <translation type="vanished">Le rayon ne peut pas être négatif</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>La longueur ne peut pas être égale à 0</translation>
+        <translation type="vanished">La longueur ne peut pas être égale à 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Erreur</translation>
+        <translation type="vanished">Erreur</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Le rayon ne peut pas être négatif</translation>
+        <translation type="vanished">Le rayon ne peut pas être négatif</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4381,7 +4381,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Sélectionner le chemin principal des objets, &lt;b&gt;Maj.&lt;/b&gt; - inverser la direction de la courbe, &lt;b&gt;Entrée&lt;/b&gt; - finir la création</translation>
+        <translation type="vanished">Sélectionner le chemin principal des objets, &lt;b&gt;Maj.&lt;/b&gt; - inverser la direction de la courbe, &lt;b&gt;Entrée&lt;/b&gt; - finir la création</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4595,6 +4595,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Marge de couture actuelle</translation>
@@ -5516,10 +5532,6 @@ Apply settings anyway?</source>
         <source>Grainline</source>
         <translation>Droit-fil</translation>
     </message>
-    <message>
-        <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation>Inverser</translation>
@@ -5708,6 +5720,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;vide&gt;</translation>
@@ -5975,11 +5991,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Erreur</translation>
+        <translation type="vanished">Erreur</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Une longueur ne peut être négative</translation>
+        <translation type="vanished">Une longueur ne peut être négative</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6114,11 +6130,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Erreur</translation>
+        <translation type="vanished">Erreur</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Une longueur ne peut être négative</translation>
+        <translation type="vanished">Une longueur ne peut être négative</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6167,23 +6183,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Erreur</translation>
+        <translation type="vanished">Erreur</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Champ vide</translation>
+        <translation type="vanished">Champ vide</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>La valeur ne peut pas être 0</translation>
+        <translation type="vanished">La valeur ne peut pas être 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Valeur</translation>
+        <translation type="vanished">Valeur</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Erreur d&apos;analyse : %1</translation>
+        <translation type="vanished">Erreur d&apos;analyse : %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6237,14 +6253,6 @@ Apply settings anyway?</source>
         <source>by second edge right angle</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be less than 0</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>DialogTriangle</name>
@@ -7743,10 +7751,6 @@ Voulez-vous sauvegarder les changements?</translation>
         <source>Select main path objects clockwise.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>The document has no write permissions.</source>
         <translation type="unfinished"></translation>
@@ -7851,14 +7855,6 @@ Voulez-vous sauvegarder les changements?</translation>
         <source>Forum</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation type="unfinished"></translation>
@@ -8035,6 +8031,18 @@ Voulez-vous sauvegarder les changements?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8912,6 +8920,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8924,6 +8936,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Erreur</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">La valeur ne peut pas être 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Erreur d&apos;analyse : %1</translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10234,6 +10270,18 @@ Voulez-vous enregistrer les changements?</translation>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10773,48 +10821,64 @@ Voulez-vous enregistrer les changements?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Lettre</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Légal</translation>
     </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Roulleau 24 pouces</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rouleau de 30po</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rouleau de 36po</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rouleau de 42po</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rouleau de 44po</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished">Personnalisé</translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rouleau de 44po {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rouleau de 44po {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rouleau de 44po {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Personnalisé</translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -13102,6 +13166,10 @@ Voulez-vous enregistrer les changements?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14603,18 +14671,26 @@ Voulez-vous enregistrer les changements?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Trajectoire de courbe&lt;/b&gt; : sélectionner au moins sept points, &lt;b&gt;Entrée&lt;/b&gt; - pour terminer</translation>
+        <translation type="vanished">&lt;b&gt;Trajectoire de courbe&lt;/b&gt; : sélectionner au moins sept points, &lt;b&gt;Entrée&lt;/b&gt; - pour terminer</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Trajectoire de courbe&lt;/b&gt; : sélectionner plus de points pour compléter le segment</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection courbe et axe&lt;/b&gt; : angle = %1°; &lt;b&gt;Déplacer&lt;/b&gt; - Angle magnétique, &lt;b&gt;Entrée&lt;/b&gt; - valider la création</translation>
+        <translation type="vanished">&lt;b&gt;Intersection courbe et axe&lt;/b&gt; : angle = %1°; &lt;b&gt;Déplacer&lt;/b&gt; - Angle magnétique, &lt;b&gt;Entrée&lt;/b&gt; - valider la création</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14625,31 +14701,39 @@ Voulez-vous enregistrer les changements?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Point à la distance et l&apos;angle&lt;/b&gt;: angle = %1°, distance = %2%3; &lt;b&gt;Majuscule&lt;/b&gt; - angle contraint, &lt;b&gt;Entrée&lt;/b&gt; -valide la création</translation>
+        <translation type="vanished">&lt;b&gt;Point à la distance et l&apos;angle&lt;/b&gt;: angle = %1°, distance = %2%3; &lt;b&gt;Majuscule&lt;/b&gt; - angle contraint, &lt;b&gt;Entrée&lt;/b&gt; -valide la création</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Intersection ligne et axe&lt;/b&gt;: angle = %1°; &lt;b&gt;Déplacer&lt;/b&gt; - Angle magnétique, &lt;b&gt;Entrée&lt;/b&gt; - valider la création</translation>
+        <translation type="vanished">&lt;b&gt;Intersection ligne et axe&lt;/b&gt;: angle = %1°; &lt;b&gt;Déplacer&lt;/b&gt; - Angle magnétique, &lt;b&gt;Entrée&lt;/b&gt; - valider la création</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolMove</name>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
-        <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14657,7 +14741,11 @@ Voulez-vous enregistrer les changements?</translation>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Utilisez &lt;b&gt;Majuscule&lt;/b&gt; pour contraindre l&apos;angle!</translation>
+        <translation type="vanished">Utilisez &lt;b&gt;Majuscule&lt;/b&gt; pour contraindre l&apos;angle!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14668,11 +14756,19 @@ Voulez-vous enregistrer les changements?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Trajectoire de courbe&lt;/b&gt; : sélectionner au moins trois points, &lt;b&gt;Entrée&lt;/b&gt; - pour terminer</translation>
+        <translation type="vanished">&lt;b&gt;Trajectoire de courbe&lt;/b&gt; : sélectionner au moins trois points, &lt;b&gt;Entrée&lt;/b&gt; - pour terminer</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Utilisez &lt;b&gt;Majuscule&lt;/b&gt; pour contraindre l&apos;angle!</translation>
+        <translation type="vanished">Utilisez &lt;b&gt;Majuscule&lt;/b&gt; pour contraindre l&apos;angle!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_he_IL.ts

@@ -396,18 +396,6 @@
         <source>Edit the arc length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be equal 0</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Radius:</source>
         <translation type="unfinished"></translation>
@@ -1369,14 +1357,6 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Edit radius1</source>
         <translation type="unfinished"></translation>
@@ -3197,10 +3177,6 @@ Apply settings anyway?</source>
         <source>Angle:</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished"></translation>
@@ -3409,6 +3385,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished"></translation>
@@ -4162,10 +4154,6 @@ Apply settings anyway?</source>
         <source>Grainline</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished"></translation>
@@ -4354,6 +4342,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished"></translation>
@@ -4571,14 +4563,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
@@ -4670,14 +4654,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Not used</source>
         <translation type="unfinished"></translation>
@@ -4723,26 +4699,6 @@ Apply settings anyway?</source>
 </context>
 <context>
     <name>DialogTool</name>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Empty field</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be 0</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Parser error: %1</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>First point</source>
         <translation>נקודה ראשונה</translation>
@@ -4791,14 +4747,6 @@ Apply settings anyway?</source>
         <source>by second edge right angle</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be less than 0</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>DialogTriangle</name>
@@ -5963,10 +5911,6 @@ Do you want to save your changes?</source>
         <source>Select main path objects clockwise.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>The document has no write permissions.</source>
         <translation type="unfinished"></translation>
@@ -6071,14 +6015,6 @@ Do you want to save your changes?</source>
         <source>Forum</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation type="unfinished"></translation>
@@ -6255,6 +6191,18 @@ Do you want to save your changes?</source>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -6932,6 +6880,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -6944,6 +6896,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QmuParser</name>
@@ -8084,6 +8060,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -8467,46 +8455,62 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation type="unfinished"></translation>
+        <comment>Paper format</comment>
-    </message>
-    <message>
-        <source>Custom</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -10457,6 +10461,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -11817,57 +11825,57 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolEndLine</name>
     <message>
-        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolMove</name>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
-        <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -11878,11 +11886,11 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>

share/translations/valentina_id_ID.ts

@@ -571,18 +571,6 @@
         <source>Edit the arc length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be equal 0</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Radius:</source>
         <translation>Radius:</translation>
@@ -1628,14 +1616,6 @@
         <source>Color:</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Edit radius1</source>
         <translation type="unfinished"></translation>
@@ -3500,10 +3480,6 @@ Apply settings anyway?</source>
         <source>Angle:</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished"></translation>
@@ -3712,6 +3688,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished"></translation>
@@ -4488,10 +4480,6 @@ Apply settings anyway?</source>
         <source>Grainline</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished"></translation>
@@ -4680,6 +4668,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished"></translation>
@@ -4901,14 +4893,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Calculation</source>
         <translation type="unfinished"></translation>
@@ -5000,14 +4984,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Not used</source>
         <translation type="unfinished"></translation>
@@ -5052,26 +5028,6 @@ Apply settings anyway?</source>
 </context>
 <context>
     <name>DialogTool</name>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Empty field</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be 0</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Parser error: %1</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>First point</source>
         <translation>Titik pertama</translation>
@@ -5120,14 +5076,6 @@ Apply settings anyway?</source>
         <source>by second edge right angle</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be less than 0</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>DialogTriangle</name>
@@ -6309,10 +6257,6 @@ Apakah anda ingin menyimpan perubahan anda?</translation>
         <source>Select main path objects clockwise.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>The document has no write permissions.</source>
         <translation type="unfinished"></translation>
@@ -6417,14 +6361,6 @@ Apakah anda ingin menyimpan perubahan anda?</translation>
         <source>Forum</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation type="unfinished"></translation>
@@ -6601,6 +6537,18 @@ Apakah anda ingin menyimpan perubahan anda?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -7278,6 +7226,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -7290,6 +7242,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QmuParser</name>
@@ -8422,6 +8398,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -8847,46 +8835,62 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation type="unfinished"></translation>
+        <comment>Paper format</comment>
-    </message>
-    <message>
-        <source>Custom</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -10849,6 +10853,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -12214,57 +12222,57 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolEndLine</name>
     <message>
-        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolMove</name>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
-        <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -12275,11 +12283,11 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>

share/translations/valentina_it_IT.ts

@@ -393,7 +393,7 @@
     </message>
     <message>
         <source>Built on %1 at %2</source>
-        <translation>Aumentato dall&apos; %1 al %2</translation>
+        <translation>Compilato il %1 alle %2</translation>
     </message>
     <message>
         <source>Check For Updates</source>
@@ -436,7 +436,7 @@
     </message>
     <message>
         <source>Built on %1 at %2</source>
-        <translation>Aumentato dall&apos; %1 al %2</translation>
+        <translation>Compilato il %1 alle %2</translation>
     </message>
     <message>
         <source>Check For Updates</source>
@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Errore</translation>
+        <translation type="vanished">Errore</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Il raggio non può essere negativo</translation>
+        <translation type="vanished">Il raggio non può essere negativo</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>La lunghezza non può essere 0</translation>
+        <translation type="vanished">La lunghezza non può essere 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2080,14 +2080,6 @@
         <source>Color:</source>
         <translation type="unfinished">Colore:</translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">Errore</translation>
-    </message>
-    <message>
-        <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished">Il raggio non può essere negativo</translation>
-    </message>
     <message>
         <source>Edit radius1</source>
         <translation>Modifica raggio1</translation>
@@ -4348,7 +4340,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Seleziona tutti i punti del tracciato, &lt;b&gt;Shift&lt;/b&gt; - inverti la direzione della curva, &lt;b&gt;Enter&lt;/b&gt; - completa la selezione</translation>
+        <translation type="vanished">Seleziona tutti i punti del tracciato, &lt;b&gt;Shift&lt;/b&gt; - inverti la direzione della curva, &lt;b&gt;Enter&lt;/b&gt; - completa la selezione</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4562,6 +4554,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation>Escluse</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Margine di cucitura corrente</translation>
@@ -5485,7 +5493,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Seleziona gli oggetti del tracciato principale in senso orario, &lt;b&gt;Shift&lt;/b&gt; - per invertire il senso della curva, &lt;b&gt;Invio&lt;/b&gt; - per finire la creazione</translation>
+        <translation type="vanished">Seleziona gli oggetti del tracciato principale in senso orario, &lt;b&gt;Shift&lt;/b&gt; - per invertire il senso della curva, &lt;b&gt;Invio&lt;/b&gt; - per finire la creazione</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5675,6 +5683,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;Empty&gt;</translation>
@@ -5942,11 +5954,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Errore</translation>
+        <translation type="vanished">Errore</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>La lunghezza non può essere inferiore a 0</translation>
+        <translation type="vanished">La lunghezza non può essere inferiore a 0</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6081,11 +6093,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Errore</translation>
+        <translation type="vanished">Errore</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>La lunghezza non può essere inferiore a 0</translation>
+        <translation type="vanished">La lunghezza non può essere inferiore a 0</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6134,23 +6146,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Errore</translation>
+        <translation type="vanished">Errore</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Campo vuoto</translation>
+        <translation type="vanished">Campo vuoto</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Il valore non può essere 0</translation>
+        <translation type="vanished">Il valore non può essere 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Valore</translation>
+        <translation type="vanished">Valore</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Errore parser: %1</translation>
+        <translation type="vanished">Errore parser: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6206,11 +6218,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Risultato invalido. Il valore è infinito o NaN (invalido). Per favore, verifica i tuoi calcoli.</translation>
+        <translation type="vanished">Risultato invalido. Il valore è infinito o NaN (invalido). Per favore, verifica i tuoi calcoli.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Il valore non può essere meno di 0</translation>
+        <translation type="vanished">Il valore non può essere meno di 0</translation>
     </message>
 </context>
 <context>
@@ -6535,7 +6547,7 @@ Apply settings anyway?</source>
     <name>InternalStrings</name>
     <message>
         <source>The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.</source>
-        <translation>l programma viene fornito COSì COM&apos;è, SENZA ALCUN TIPO DI GARANZIA. COMPRESA LA GARANZIA DI DESIGN, COMMERCIABILITÀ E IDONEITÀ PER UN PARTICOLARE SCOPO.</translation>
+        <translation>Il programma viene fornito COSÌ COM&apos;È, SENZA ALCUN TIPO DI GARANZIA. COMPRESA LA GARANZIA DI PROGETTAZIONE, COMMERCIABILITÀ E IDONEITÀ PER UN PARTICOLARE SCOPO.</translation>
     </message>
 </context>
 <context>
@@ -7712,7 +7724,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Seleziona i punti del tracciato, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</translation>
+        <translation type="vanished">Seleziona i punti del tracciato, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7818,14 +7830,6 @@ Vuoi salvare i cambiamenti?</translation>
         <source>Forum</source>
         <translation>Forum</translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation>Apri Tape per creare o modificare un file di misure</translation>
@@ -8002,6 +8006,18 @@ Vuoi salvare i cambiamenti?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8756,7 +8772,7 @@ This option will take an affect after restart.</source>
     <name>QCoreApplication</name>
     <message>
         <source>Based on Qt %1 (%2, %3 bit)</source>
-        <translation>basata su Qt %1 (%2, %3 bit)</translation>
+        <translation>Basato su Qt %1 (%2, %3 bit)</translation>
     </message>
 </context>
 <context>
@@ -8891,6 +8907,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8903,6 +8923,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Errore</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Risultato invalido. Il valore è infinito o NaN (invalido). Per favore, verifica i tuoi calcoli.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Il valore non può essere 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Il valore non può essere meno di 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10217,6 +10261,18 @@ Vuoi salvare le tue modifiche?</translation>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10756,48 +10812,64 @@ Vuoi salvare le tue modifiche?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Lettera</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Legale</translation>
     </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rotolo 24pollici</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rotolo 30pollici</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rotolo 36pollici</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rotolo 42pollici</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rotolo 44pollici</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished">Personalizzato</translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rotolo 44pollici {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rotolo 44pollici {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rotolo 44pollici {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Personalizzato</translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -12993,6 +13065,10 @@ Vuoi salvare le tue modifiche?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14436,57 +14512,57 @@ Vuoi salvare le tue modifiche?</translation>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolEndLine</name>
     <message>
-        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolMove</name>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
-        <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14497,11 +14573,11 @@ Vuoi salvare le tue modifiche?</translation>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>

share/translations/valentina_nl_NL.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Fout</translation>
+        <translation type="vanished">Fout</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Straal kan niet negatief zijn</translation>
+        <translation type="vanished">Straal kan niet negatief zijn</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Lengte kan niet gelijk zijn aan 0</translation>
+        <translation type="vanished">Lengte kan niet gelijk zijn aan 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Fout</translation>
+        <translation type="vanished">Fout</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Straal mag niet negatief zijn</translation>
+        <translation type="vanished">Straal mag niet negatief zijn</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4386,7 +4386,7 @@ Toch de instellingen aanpassen?</translation>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Selecteer gewenste pad objecten, &lt;b&gt;Shift&lt;/b&gt; - keer richting kromme, &lt;b&gt;Enter&lt;/b&gt; -maak af</translation>
+        <translation type="vanished">Selecteer gewenste pad objecten, &lt;b&gt;Shift&lt;/b&gt; - keer richting kromme, &lt;b&gt;Enter&lt;/b&gt; -maak af</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4600,6 +4600,22 @@ Toch de instellingen aanpassen?</translation>
         <source>Excluded</source>
         <translation>Uitgezonderd</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Huidige naadtoeslag</translation>
@@ -5523,7 +5539,7 @@ Toch de instellingen aanpassen?</translation>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Selecteer hoofdpad-objecten met de klok mee,&lt;b&gt;Shift&lt;/b&gt; - draai richting kromming om, &lt;b&gt;Enter&lt;/b&gt; - einde creatie</translation>
+        <translation type="vanished">Selecteer hoofdpad-objecten met de klok mee,&lt;b&gt;Shift&lt;/b&gt; - draai richting kromming om, &lt;b&gt;Enter&lt;/b&gt; - einde creatie</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5713,6 +5729,10 @@ Toch de instellingen aanpassen?</translation>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;Leeg&gt;</translation>
@@ -5980,11 +6000,11 @@ Toch de instellingen aanpassen?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Fout</translation>
+        <translation type="vanished">Fout</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>De lengte kan niet negatief zijn</translation>
+        <translation type="vanished">De lengte kan niet negatief zijn</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6119,11 +6139,11 @@ Toch de instellingen aanpassen?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Fout</translation>
+        <translation type="vanished">Fout</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>De lengte kan niet negatief zijn</translation>
+        <translation type="vanished">De lengte kan niet negatief zijn</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6172,23 +6192,23 @@ Toch de instellingen aanpassen?</translation>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Fout</translation>
+        <translation type="vanished">Fout</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Leeg veld</translation>
+        <translation type="vanished">Leeg veld</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Waarde kan geen 0 zijn</translation>
+        <translation type="vanished">Waarde kan geen 0 zijn</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Waarde</translation>
+        <translation type="vanished">Waarde</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Fout bij uitpakken: %1</translation>
+        <translation type="vanished">Fout bij uitpakken: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6244,11 +6264,11 @@ Toch de instellingen aanpassen?</translation>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Ongeldig resultaat. Waarde is oneindig of NaN. Controleer uw berekeningen.</translation>
+        <translation type="vanished">Ongeldig resultaat. Waarde is oneindig of NaN. Controleer uw berekeningen.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Waarde kan niet kleiner dan 0 zijn</translation>
+        <translation type="vanished">Waarde kan niet kleiner dan 0 zijn</translation>
     </message>
 </context>
 <context>
@@ -7749,7 +7769,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Selecteer pad objecten, &lt;b&gt;Shift&lt;/b&gt; - draai richting kromming om</translation>
+        <translation type="vanished">Selecteer pad objecten, &lt;b&gt;Shift&lt;/b&gt; - draai richting kromming om</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7857,11 +7877,11 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Selecteer een of meer objecten, houd &lt;b&gt;%1&lt;/b&gt; vast - voor meerdere selecties, &lt;b&gt;Enter&lt;/b&gt; - maak af</translation>
+        <translation type="vanished">Selecteer een of meer objecten, houd &lt;b&gt;%1&lt;/b&gt; vast - voor meerdere selecties, &lt;b&gt;Enter&lt;/b&gt; - maak af</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation>Selecteer een of meer objecten, houd &lt;b&gt;%1&lt;/b&gt; vast - voor meerdere selecties, &lt;b&gt;Enter&lt;/b&gt; - bevestig selectie</translation>
+        <translation type="vanished">Selecteer een of meer objecten, houd &lt;b&gt;%1&lt;/b&gt; vast - voor meerdere selecties, &lt;b&gt;Enter&lt;/b&gt; - bevestig selectie</translation>
     </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
@@ -8039,6 +8059,18 @@ Do you want to save your changes?</source>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8928,6 +8960,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8940,6 +8976,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Ongeldig resultaat. Waarde is oneindig of NaN. Controleer uw berekeningen.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Waarde kan geen 0 zijn</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Waarde kan niet kleiner dan 0 zijn</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10258,6 +10318,18 @@ Wil je deze veranderingen opslaan?</translation>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10801,47 +10873,107 @@ Wil je deze veranderingen opslaan?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
-        <translation>Letter</translation>
+        <translation type="vanished">Letter</translation>
     </message>
     <message>
         <source>Legal</source>
-        <translation>Legaal</translation>
+        <translation type="vanished">Legaal</translation>
     </message>
     <message>
         <source>Roll 24in</source>
-        <translation>Roll 24Inch</translation>
+        <translation type="vanished">Roll 24Inch</translation>
     </message>
     <message>
         <source>Roll 30in</source>
-        <translation>Roll 30inch</translation>
+        <translation type="vanished">Roll 30inch</translation>
     </message>
     <message>
         <source>Roll 36in</source>
-        <translation>Roll 36inch</translation>
+        <translation type="vanished">Roll 36inch</translation>
     </message>
     <message>
         <source>Roll 42in</source>
-        <translation>Roll 42inch</translation>
+        <translation type="vanished">Roll 42inch</translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation>Roll 44inch</translation>
+        <translation type="vanished">Roll 44inch</translation>
     </message>
     <message>
         <source>Custom</source>
-        <translation>Op maat</translation>
+        <translation type="vanished">Op maat</translation>
     </message>
     <message>
         <source>Roll 48in</source>
-        <translation>Roll 44inch {48inch?}</translation>
+        <translation type="vanished">Roll 44inch {48inch?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
-        <translation>Roll 44inch {62inch?}</translation>
+        <translation type="vanished">Roll 44inch {62inch?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
-        <translation>Roll 44inch {72inch?}</translation>
+        <translation type="vanished">Roll 44inch {72inch?}</translation>
+    </message>
+    <message>
+        <source>Letter</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Letter</translation>
+    </message>
+    <message>
+        <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Legaal</translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Roll 24in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Roll 44inch {72inch?} {24i?}</translation>
+    </message>
+    <message>
+        <source>Roll 30in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Roll 44inch {72inch?} {30i?}</translation>
+    </message>
+    <message>
+        <source>Roll 36in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Roll 44inch {72inch?} {36i?}</translation>
+    </message>
+    <message>
+        <source>Roll 42in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Roll 44inch {72inch?} {42i?}</translation>
+    </message>
+    <message>
+        <source>Roll 44in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Roll 44inch {72inch?} {44i?}</translation>
+    </message>
+    <message>
+        <source>Roll 48in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Roll 44inch {48inch?}</translation>
+    </message>
+    <message>
+        <source>Roll 62in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Roll 44inch {62inch?}</translation>
+    </message>
+    <message>
+        <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Roll 44inch {72inch?}</translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Op maat</translation>
     </message>
 </context>
 <context>
@@ -13155,6 +13287,10 @@ Wil je deze veranderingen opslaan?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14656,18 +14792,26 @@ Wil je deze veranderingen opslaan?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Krommingspad&lt;/b&gt;: selecteer zeven of meer punten, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
+        <translation type="vanished">&lt;b&gt;Krommingspad&lt;/b&gt;: selecteer zeven of meer punten, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Krommingspad&lt;/b&gt;: selecteer meer punten om segment kompleet te maken</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Kruising tussen kromming en as&lt;/b&gt;: hoek = %1°; &lt;b&gt;Shift&lt;/b&gt; -steekhoek, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
+        <translation type="vanished">&lt;b&gt;Kruising tussen kromming en as&lt;/b&gt;: hoek = %1°; &lt;b&gt;Shift&lt;/b&gt; -steekhoek, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14678,14 +14822,22 @@ Wil je deze veranderingen opslaan?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Punt op afstand en hoek&lt;/b&gt;: hoek = %1 , lengte = %2%3, &lt;b&gt;Shift&lt;/b&gt; - steekhoek, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
+        <translation type="vanished">&lt;b&gt;Punt op afstand en hoek&lt;/b&gt;: hoek = %1 , lengte = %2%3, &lt;b&gt;Shift&lt;/b&gt; - steekhoek, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Kruising tussen lijn en as&lt;/b&gt;: hoek = %1°; &lt;b&gt;Shift&lt;/b&gt; - steekhoek, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
+        <translation type="vanished">&lt;b&gt;Kruising tussen lijn en as&lt;/b&gt;: hoek = %1°; &lt;b&gt;Shift&lt;/b&gt; - steekhoek, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14695,11 +14847,11 @@ Wil je deze veranderingen opslaan?</translation>
         <translation type="vanished">Lengte = %1%2, hoek = %3°, &lt;b&gt;Shift&lt;/b&gt; - steekhoek, &lt;b&gt;Muis klik&lt;/b&gt; -voltooi creatie</translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14707,14 +14859,22 @@ Wil je deze veranderingen opslaan?</translation>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Hoek van draaiing = %1°, &lt;b&gt;Shift&lt;/b&gt; - steekhoek, &lt;b&gt;Muisklik&lt;/b&gt; - voltooi creatie</translation>
+        <translation type="vanished">Hoek van draaiing = %1°, &lt;b&gt;Shift&lt;/b&gt; - steekhoek, &lt;b&gt;Muisklik&lt;/b&gt; - voltooi creatie</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Gebruik &lt;b&gt;Shift&lt;/b&gt; voor steekhoek!</translation>
+        <translation type="vanished">Gebruik &lt;b&gt;Shift&lt;/b&gt; voor steekhoek!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14725,11 +14885,19 @@ Wil je deze veranderingen opslaan?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Krommings pad&lt;/b&gt;: selecteer drie of meer punten, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
+        <translation type="vanished">&lt;b&gt;Krommings pad&lt;/b&gt;: selecteer drie of meer punten, &lt;b&gt;Enter&lt;/b&gt; - voltooi creatie</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Gebruik &lt;b&gt;Shift&lt;/b&gt; voor steekhoek!</translation>
+        <translation type="vanished">Gebruik &lt;b&gt;Shift&lt;/b&gt; voor steekhoek!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_pl_PL.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Błąd</translation>
+        <translation type="vanished">Błąd</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Promień nie może być wartością ujemną</translation>
+        <translation type="vanished">Promień nie może być wartością ujemną</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Długość nie może być równa 0</translation>
+        <translation type="vanished">Długość nie może być równa 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -1918,11 +1918,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Błąd</translation>
+        <translation type="vanished">Błąd</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Promień nie może być wartością ujemną</translation>
+        <translation type="vanished">Promień nie może być wartością ujemną</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -3975,10 +3975,6 @@ Apply settings anyway?</source>
         <source>Angle:</source>
         <translation>Kąt:</translation>
     </message>
-    <message>
-        <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished"></translation>
@@ -4187,6 +4183,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished"></translation>
@@ -4993,10 +5005,6 @@ Apply settings anyway?</source>
         <source>Grainline</source>
         <translation>Linia osnowy</translation>
     </message>
-    <message>
-        <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished"></translation>
@@ -5185,6 +5193,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;pusty&gt;</translation>
@@ -5420,11 +5432,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Błąd</translation>
+        <translation type="vanished">Błąd</translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -5527,11 +5535,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Błąd</translation>
+        <translation type="vanished">Błąd</translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Not used</source>
@@ -5581,23 +5585,19 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Błąd</translation>
+        <translation type="vanished">Błąd</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Puste pole</translation>
+        <translation type="vanished">Puste pole</translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be 0</source>
-        <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Wartość</translation>
+        <translation type="vanished">Wartość</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Błąd składni: %1</translation>
+        <translation type="vanished">Błąd składni: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -5649,11 +5649,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Nieprawidłowy wynik. Wartość jest nieskończona lub NaN. Sprawdź swoje obliczenia.</translation>
+        <translation type="vanished">Nieprawidłowy wynik. Wartość jest nieskończona lub NaN. Sprawdź swoje obliczenia.</translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be less than 0</source>
-        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -6931,10 +6927,6 @@ Do you want to save your changes?</source>
         <source>Select main path objects clockwise.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>The document has no write permissions.</source>
         <translation type="unfinished"></translation>
@@ -7039,14 +7031,6 @@ Do you want to save your changes?</source>
         <source>Forum</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation type="unfinished"></translation>
@@ -7223,6 +7207,18 @@ Do you want to save your changes?</source>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8016,6 +8012,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8028,6 +8028,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Błąd</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Nieprawidłowy wynik. Wartość jest nieskończona lub NaN. Sprawdź swoje obliczenia.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Błąd składni: %1</translation>
+    </message>
 </context>
 <context>
     <name>QmuParser</name>
@@ -9259,6 +9283,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -9783,48 +9819,64 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolka 24 cale</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolka 30 cali</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolka 36 cali</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolka 42 cale</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolka 44 cale</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolka 44 cale {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolka 44 cale {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Rolka 44 cale {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -11828,6 +11880,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -13260,43 +13316,43 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolEndLine</name>
     <message>
-        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolMove</name>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -13304,14 +13360,22 @@ Do you want to save your changes?</source>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Kąt obrotu = %1°, &lt;b&gt;Shift&lt;/b&gt; - kąt przyciągania, &lt;b&gt;kliknij myszką&lt;/b&gt; - zakończ tworzenie</translation>
+        <translation type="vanished">Kąt obrotu = %1°, &lt;b&gt;Shift&lt;/b&gt; - kąt przyciągania, &lt;b&gt;kliknij myszką&lt;/b&gt; - zakończ tworzenie</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Użyj &lt;b&gt;Shift&lt;/b&gt; do przyciągania kąta!</translation>
+        <translation type="vanished">Użyj &lt;b&gt;Shift&lt;/b&gt; do przyciągania kąta!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -13322,11 +13386,19 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Ścieżka krzywej&lt;/b&gt;: wybierz trzy lub więcej punktów, &lt;b&gt;Enter&lt;/b&gt; - zakończ tworzenie</translation>
+        <translation type="vanished">&lt;b&gt;Ścieżka krzywej&lt;/b&gt;: wybierz trzy lub więcej punktów, &lt;b&gt;Enter&lt;/b&gt; - zakończ tworzenie</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Użyj &lt;b&gt;Shift&lt;/b&gt; do przyciągania kąta!</translation>
+        <translation type="vanished">Użyj &lt;b&gt;Shift&lt;/b&gt; do przyciągania kąta!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_pt_BR.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Erro</translation>
+        <translation type="vanished">Erro</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>O raio não pode ser negativo</translation>
+        <translation type="vanished">O raio não pode ser negativo</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>O comprimento não pode ser igual a 0</translation>
+        <translation type="vanished">O comprimento não pode ser igual a 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Erro</translation>
+        <translation type="vanished">Erro</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>O raio não pode ser negativo</translation>
+        <translation type="vanished">O raio não pode ser negativo</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4386,7 +4386,7 @@ Aplicar configurações de qualquer forma?</translation>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Selecione os objetos do caminho principal, &lt;b&gt;Shift&lt;/b&gt; - inverte o sentido da curva, &lt;b&gt;Enter&lt;/b&gt; - terminar a criação</translation>
+        <translation type="vanished">Selecione os objetos do caminho principal, &lt;b&gt;Shift&lt;/b&gt; - inverte o sentido da curva, &lt;b&gt;Enter&lt;/b&gt; - terminar a criação</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4600,6 +4600,22 @@ Aplicar configurações de qualquer forma?</translation>
         <source>Excluded</source>
         <translation>Excluído</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Margem de costura atual</translation>
@@ -5519,7 +5535,7 @@ Aplicar configurações de qualquer forma?</translation>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Selecione os objetos do caminho principal no sentido horário, &lt;b&gt;Shift&lt;/b&gt; - inverte a direção da curva &lt;b&gt;Enter&lt;/b&gt; - terminar a criação</translation>
+        <translation type="vanished">Selecione os objetos do caminho principal no sentido horário, &lt;b&gt;Shift&lt;/b&gt; - inverte a direção da curva &lt;b&gt;Enter&lt;/b&gt; - terminar a criação</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5709,6 +5725,10 @@ Aplicar configurações de qualquer forma?</translation>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;Empty&gt;</translation>
@@ -5976,11 +5996,11 @@ Aplicar configurações de qualquer forma?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Erro</translation>
+        <translation type="vanished">Erro</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>O comprimento não pode ser negativo</translation>
+        <translation type="vanished">O comprimento não pode ser negativo</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6115,11 +6135,11 @@ Aplicar configurações de qualquer forma?</translation>
     </message>
     <message>
         <source>Error</source>
-        <translation>Erro</translation>
+        <translation type="vanished">Erro</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>O comprimento não pode ser negativo</translation>
+        <translation type="vanished">O comprimento não pode ser negativo</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6168,23 +6188,23 @@ Aplicar configurações de qualquer forma?</translation>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Erro</translation>
+        <translation type="vanished">Erro</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Campo vazio</translation>
+        <translation type="vanished">Campo vazio</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>O valor não pode ser 0</translation>
+        <translation type="vanished">O valor não pode ser 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Valor</translation>
+        <translation type="vanished">Valor</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Erro de análise: %1</translation>
+        <translation type="vanished">Erro de análise: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6240,11 +6260,11 @@ Aplicar configurações de qualquer forma?</translation>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Resultado inválido. Valor é infinito ou não é um número. Por favor, verifique seus cálculos.</translation>
+        <translation type="vanished">Resultado inválido. Valor é infinito ou não é um número. Por favor, verifique seus cálculos.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>O valor não pode ser inferior a 0</translation>
+        <translation type="vanished">O valor não pode ser inferior a 0</translation>
     </message>
 </context>
 <context>
@@ -7746,7 +7766,7 @@ Você quer salvar suas mudanças?</translation>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Selecione o caminho dos objetos, &lt;b&gt;Shift&lt;/b&gt; - inverte a direção da curva</translation>
+        <translation type="vanished">Selecione o caminho dos objetos, &lt;b&gt;Shift&lt;/b&gt; - inverte a direção da curva</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7854,11 +7874,11 @@ Você quer salvar suas mudanças?</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Selecione um ou mais objetos, segure &lt;b&gt;%1&lt;/b&gt; - para múltipla seleção, &lt;b&gt;Enter&lt;/b&gt; - concluir a criação</translation>
+        <translation type="vanished">Selecione um ou mais objetos, segure &lt;b&gt;%1&lt;/b&gt; - para múltipla seleção, &lt;b&gt;Enter&lt;/b&gt; - concluir a criação</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation>Selecione um ou mais objetos, segure &lt;b&gt;%1&lt;/b&gt; - para múltipla seleção, &lt;b&gt;Enter&lt;/b&gt; - confirmar a seleção</translation>
+        <translation type="vanished">Selecione um ou mais objetos, segure &lt;b&gt;%1&lt;/b&gt; - para múltipla seleção, &lt;b&gt;Enter&lt;/b&gt; - confirmar a seleção</translation>
     </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
@@ -8036,6 +8056,18 @@ Você quer salvar suas mudanças?</translation>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8914,6 +8946,10 @@ Esta opção terá um efeito após o reinício.</translation>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8926,6 +8962,30 @@ Esta opção terá um efeito após o reinício.</translation>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Erro</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Resultado inválido. Valor é infinito ou não é um número. Por favor, verifique seus cálculos.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">O valor não pode ser 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">O valor não pode ser inferior a 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Erro de análise: %1</translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10244,6 +10304,18 @@ Deseja salvar suas mudanças?</translation>
         <source>Intersection 2 (only right)</source>
         <translation>Interseção 2 (apenas à direita)</translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10783,47 +10855,107 @@ Deseja salvar suas mudanças?</translation>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
-        <translation>Carta</translation>
+        <translation type="vanished">Carta</translation>
     </message>
     <message>
         <source>Legal</source>
-        <translation>Ofício</translation>
+        <translation type="vanished">Ofício</translation>
     </message>
     <message>
         <source>Roll 24in</source>
-        <translation>Rolo de 24&quot;</translation>
+        <translation type="vanished">Rolo de 24&quot;</translation>
     </message>
     <message>
         <source>Roll 30in</source>
-        <translation>Rolo de 30&quot;</translation>
+        <translation type="vanished">Rolo de 30&quot;</translation>
     </message>
     <message>
         <source>Roll 36in</source>
-        <translation>Rolo de 36&quot;</translation>
+        <translation type="vanished">Rolo de 36&quot;</translation>
     </message>
     <message>
         <source>Roll 42in</source>
-        <translation>Rolo de 42&quot;</translation>
+        <translation type="vanished">Rolo de 42&quot;</translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation>Rolo de 44&quot;</translation>
+        <translation type="vanished">Rolo de 44&quot;</translation>
     </message>
     <message>
         <source>Custom</source>
-        <translation>Personalizado</translation>
+        <translation type="vanished">Personalizado</translation>
     </message>
     <message>
         <source>Roll 48in</source>
-        <translation>Rolo de 44&quot; {481?}</translation>
+        <translation type="vanished">Rolo de 44&quot; {481?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
-        <translation>Rolo de 44&quot; {62i?}</translation>
+        <translation type="vanished">Rolo de 44&quot; {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
-        <translation>Rolo de 44&quot; {72i?}</translation>
+        <translation type="vanished">Rolo de 44&quot; {72i?}</translation>
+    </message>
+    <message>
+        <source>Letter</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Carta</translation>
+    </message>
+    <message>
+        <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Ofício</translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Roll 24in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rolo de 24&quot;</translation>
+    </message>
+    <message>
+        <source>Roll 30in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rolo de 30&quot;</translation>
+    </message>
+    <message>
+        <source>Roll 36in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rolo de 36&quot;</translation>
+    </message>
+    <message>
+        <source>Roll 42in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rolo de 42&quot;</translation>
+    </message>
+    <message>
+        <source>Roll 44in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rolo de 44&quot;</translation>
+    </message>
+    <message>
+        <source>Roll 48in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rolo de 44&quot; {481?}</translation>
+    </message>
+    <message>
+        <source>Roll 62in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rolo de 44&quot; {62i?}</translation>
+    </message>
+    <message>
+        <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Rolo de 44&quot; {72i?}</translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Personalizado</translation>
     </message>
 </context>
 <context>
@@ -13105,6 +13237,10 @@ Deseja salvar suas mudanças?</translation>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14561,31 +14697,35 @@ Deseja salvar suas mudanças?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Traçado de Curva&lt;/b&gt;: selecione sete ou mais pontos,&lt;b&gt;Enter&lt;/b&gt; - finalizar criação</translation>
+        <translation type="vanished">&lt;b&gt;Traçado de Curva&lt;/b&gt;: selecione sete ou mais pontos,&lt;b&gt;Enter&lt;/b&gt; - finalizar criação</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Traçado de Curva&lt;/b&gt;: selecione mais pontos para completar o segmento</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolEndLine</name>
     <message>
-        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14593,10 +14733,14 @@ Deseja salvar suas mudanças?</translation>
     <name>VisToolMove</name>
     <message>
         <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
-        <translation>Comprimento = %1%2, ângulo = %3°, &lt;b&gt;Shift&lt;/b&gt; - para travar o ângulo, &lt;b&gt;Mouse clique&lt;/b&gt; - terminar selecionando a posição</translation>
+        <translation type="vanished">Comprimento = %1%2, ângulo = %3°, &lt;b&gt;Shift&lt;/b&gt; - para travar o ângulo, &lt;b&gt;Mouse clique&lt;/b&gt; - terminar selecionando a posição</translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14604,14 +14748,22 @@ Deseja salvar suas mudanças?</translation>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Rotação do ângulo = %1°, &lt;b&gt;Shift&lt;/b&gt; - para travar o ângulo, &lt;b&gt;Mouse clique&lt;/b&gt; - finalizar criação</translation>
+        <translation type="vanished">Rotação do ângulo = %1°, &lt;b&gt;Shift&lt;/b&gt; - para travar o ângulo, &lt;b&gt;Mouse clique&lt;/b&gt; - finalizar criação</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Usar &lt;b&gt;Shift&lt;/b&gt; para travar o ângulo!</translation>
+        <translation type="vanished">Usar &lt;b&gt;Shift&lt;/b&gt; para travar o ângulo!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14622,11 +14774,19 @@ Deseja salvar suas mudanças?</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Traçado de Curva&lt;/b&gt;: selecione três ou mais pontos,&lt;b&gt;Enter&lt;/b&gt; - finalizar criação</translation>
+        <translation type="vanished">&lt;b&gt;Traçado de Curva&lt;/b&gt;: selecione três ou mais pontos,&lt;b&gt;Enter&lt;/b&gt; - finalizar criação</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Usar &lt;b&gt;Shift&lt;/b&gt; para travar o ângulo!</translation>
+        <translation type="vanished">Usar &lt;b&gt;Shift&lt;/b&gt; para travar o ângulo!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_ro_RO.ts

@@ -710,15 +710,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Eroare</translation>
+        <translation type="vanished">Eroare</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Raza nu poate fii negativă</translation>
+        <translation type="vanished">Raza nu poate fii negativă</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Lungimea nu poate fii egală cu 0</translation>
+        <translation type="vanished">Lungimea nu poate fii egală cu 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -1897,14 +1897,6 @@
         <source>Color:</source>
         <translation type="unfinished">Culoare:</translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">Eroare</translation>
-    </message>
-    <message>
-        <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished">Raza nu poate fii negativă</translation>
-    </message>
     <message>
         <source>Edit radius1</source>
         <translation type="unfinished"></translation>
@@ -3920,10 +3912,6 @@ Apply settings anyway?</source>
         <source>Angle:</source>
         <translation type="unfinished">Unghi:</translation>
     </message>
-    <message>
-        <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished">Înapoi</translation>
@@ -4132,6 +4120,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished"></translation>
@@ -4922,10 +4926,6 @@ Apply settings anyway?</source>
         <source>Grainline</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished">Înapoi</translation>
@@ -5114,6 +5114,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished"></translation>
@@ -5367,14 +5371,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">Eroare</translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Calculation</source>
         <translation type="unfinished">Calcul</translation>
@@ -5494,14 +5490,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">Eroare</translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Not used</source>
         <translation type="unfinished"></translation>
@@ -5550,23 +5538,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Eroare</translation>
+        <translation type="vanished">Eroare</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Câmp gol</translation>
+        <translation type="vanished">Câmp gol</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Valoarea nu poate fi 0</translation>
+        <translation type="vanished">Valoarea nu poate fi 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Valoare</translation>
+        <translation type="vanished">Valoare</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Eroare Parser: %1</translation>
+        <translation type="vanished">Eroare Parser: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -5616,14 +5604,6 @@ Apply settings anyway?</source>
         <source>by second edge right angle</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be less than 0</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>DialogTriangle</name>
@@ -6912,10 +6892,6 @@ Do you want to save your changes?</source>
         <source>Select main path objects clockwise.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>The document has no write permissions.</source>
         <translation type="unfinished"></translation>
@@ -7020,14 +6996,6 @@ Do you want to save your changes?</source>
         <source>Forum</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation type="unfinished"></translation>
@@ -7204,6 +7172,18 @@ Do you want to save your changes?</source>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -7892,6 +7872,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -7904,6 +7888,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Eroare</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Valoarea nu poate fi 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Eroare Parser: %1</translation>
+    </message>
 </context>
 <context>
     <name>QmuParser</name>
@@ -9072,6 +9080,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -9532,46 +9552,62 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation type="unfinished"></translation>
+        <comment>Paper format</comment>
-    </message>
-    <message>
-        <source>Custom</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -11550,6 +11586,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -12950,57 +12990,57 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolEndLine</name>
     <message>
-        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolMove</name>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
-        <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -13011,11 +13051,11 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>

share/translations/valentina_ru_RU.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Ошибка</translation>
+        <translation type="vanished">Ошибка</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Радиус не может быть отрицательным</translation>
+        <translation type="vanished">Радиус не может быть отрицательным</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Длина не может быть нулевой</translation>
+        <translation type="vanished">Длина не может быть нулевой</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -1792,7 +1792,7 @@
     </message>
     <message>
         <source>Height</source>
-        <translation>Рост</translation>
+        <translation>Высота</translation>
     </message>
     <message>
         <source>Measurments extension</source>
@@ -1967,7 +1967,7 @@
     </message>
     <message>
         <source>Height</source>
-        <translation type="vanished">Рост</translation>
+        <translation type="vanished">Высота</translation>
     </message>
     <message>
         <source>Size</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Ошибка</translation>
+        <translation type="vanished">Ошибка</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Радиус не может быть отрицательным</translation>
+        <translation type="vanished">Радиус не может быть отрицательным</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -3708,7 +3708,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Base height:</source>
-        <translation>Базовая высота:</translation>
+        <translation>Базовый рост:</translation>
     </message>
     <message>
         <source>Individual</source>
@@ -3932,7 +3932,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>All heights (cm)</source>
-        <translation>Все росты (см)</translation>
+        <translation>Все роста (см)</translation>
     </message>
     <message>
         <source>All sizes (cm)</source>
@@ -3952,7 +3952,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Height:</source>
-        <translation>Высота:</translation>
+        <translation>Рост:</translation>
     </message>
     <message>
         <source>Size:</source>
@@ -4068,7 +4068,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Use %1 and %2 to insert pattern size and height</source>
-        <translation type="vanished">Используйте %1 и %2 для вставки размера и высоты модели</translation>
+        <translation type="vanished">Используйте %1 и %2 для вставки размера и роста выкройки</translation>
     </message>
     <message>
         <source>Show date of layout creation (%1)</source>
@@ -4386,7 +4386,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Выберите объекты основного контура, &lt;b&gt;Shift&lt;/b&gt; - обратное направление кривой, &lt;b&gt;Enter&lt;/b&gt; - закончить создание</translation>
+        <translation type="vanished">Выберите объекты основного контура, &lt;b&gt;Shift&lt;/b&gt; - обратное направление кривой, &lt;b&gt;Enter&lt;/b&gt; - закончить создание</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4600,6 +4600,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation>Исключенный</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Текущий припуск на швы</translation>
@@ -5524,7 +5540,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Выберите объекты основного контура по часовой стрелке, &lt;b&gt;Shift&lt;/b&gt; - обратное направление кривой, &lt;b&gt;Enter&lt;/b&gt; - закончить создание</translation>
+        <translation type="vanished">Выберите объекты основного контура по часовой стрелке, &lt;b&gt;Shift&lt;/b&gt; - обратное направление кривой, &lt;b&gt;Enter&lt;/b&gt; - закончить создание</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5714,6 +5730,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation>Для открытия всех функций детали закончите создание главного контура. Пожалуйста, нажмите ОК.</translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished"></translation>
@@ -5981,11 +6001,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Ошибка</translation>
+        <translation type="vanished">Ошибка</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Длина не может быть отрицательной</translation>
+        <translation type="vanished">Длина не может быть отрицательной</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6120,11 +6140,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Ошибка</translation>
+        <translation type="vanished">Ошибка</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Длина не может быть отрицательной</translation>
+        <translation type="vanished">Длина не может быть отрицательной</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6174,23 +6194,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Ошибка</translation>
+        <translation type="vanished">Ошибка</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Пустое поле</translation>
+        <translation type="vanished">Пустое поле</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Значение не может быть 0</translation>
+        <translation type="vanished">Значение не может быть 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Значение</translation>
+        <translation type="vanished">Значение</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Ошибка синтаксического анализатора: %1</translation>
+        <translation type="vanished">Ошибка синтаксического анализатора: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6246,11 +6266,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Недопустимый результат. Значение бесконечность или NaN. Пожалуйста, проверьте расчеты.</translation>
+        <translation type="vanished">Недопустимый результат. Значение бесконечность или NaN. Пожалуйста, проверьте расчеты.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Значение не может быть меньше 0</translation>
+        <translation type="vanished">Значение не может быть меньше 0</translation>
     </message>
 </context>
 <context>
@@ -6622,7 +6642,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>The base height</source>
-        <translation>Базовая высота</translation>
+        <translation>Базовый рост</translation>
     </message>
     <message>
         <source>The base size</source>
@@ -6662,7 +6682,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Invalid base height argument. Must be %1cm.</source>
-        <translation>Неверный параметр базовой высоты. Должен быть %1 см.</translation>
+        <translation>Неверный параметр базового роста. Должен быть %1 см.</translation>
     </message>
     <message>
         <source>Invalid base size argument. Must be %1cm.</source>
@@ -6670,7 +6690,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Open with the base height. Valid values: %1cm.</source>
-        <translation>Открыть с базовой высотой. Возможные значения: %1 см.</translation>
+        <translation>Открыть с базовым ростом. Возможные значения: %1 см.</translation>
     </message>
     <message>
         <source>Use for unit testing. Run the program and open a file without showing the main window.</source>
@@ -6909,7 +6929,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>zoom in</source>
-        <translation>Увеличить</translation>
+        <translation>увеличить</translation>
     </message>
     <message>
         <source>Zoom out</source>
@@ -7382,8 +7402,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Sync measurements</source>
-        <translation type="vanished">Синхронизировать
+        <translation type="vanished">Синхронизировать мерки</translation>
-мерки</translation>
     </message>
     <message>
         <source>Individual measurements (*.vit);;Standard measurements (*.vst)</source>
@@ -7488,15 +7507,15 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Not supported height value &apos;%1&apos; for this pattern file.</source>
-        <translation>Значение высоты &apos;%1&apos; не поддерживается для этого файла выкройки.</translation>
+        <translation>Значение роста &apos;%1&apos; не поддерживается для этого файла выкройки.</translation>
     </message>
     <message>
         <source>Couldn&apos;t set height. Need a file with standard measurements.</source>
-        <translation type="vanished">Невозможно установить высоту. Требуется файл стандартных мерок.</translation>
+        <translation type="vanished">Невозможно установить рост. Требуется файл стандартных мерок.</translation>
     </message>
     <message>
         <source>Couldn&apos;t set height. File wasn&apos;t opened.</source>
-        <translation>Невозможно установить высоту. Файл не был открыт.</translation>
+        <translation>Невозможно установить рост. Файл не был открыт.</translation>
     </message>
     <message>
         <source>Export error.</source>
@@ -7588,7 +7607,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>The lock file could not be created, for lack of permissions.</source>
-        <translation>lock файл не может быть создан, не хватает прав доступа.</translation>
+        <translation>Файл блокировки не может быть создан, не хватает прав доступа.</translation>
     </message>
     <message>
         <source>Unknown error happened, for instance a full partition prevented writing out the lock file.</source>
@@ -7700,7 +7719,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Height:</source>
-        <translation>Высота:</translation>
+        <translation>Рост:</translation>
     </message>
     <message>
         <source>Size:</source>
@@ -7752,7 +7771,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Выберите объекты контура, &lt;b&gt;Shift&lt;/b&gt; - обратное направление кривой</translation>
+        <translation type="vanished">Выберите объекты контура, &lt;b&gt;Shift&lt;/b&gt; - обратное направление кривой</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7860,11 +7879,11 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Выберите один или несколько объектов, зажмите &lt;b&gt;%1&lt;/b&gt; - для множественного выбора, &lt;b&gt;Enter&lt;/b&gt; - закончить создание</translation>
+        <translation type="vanished">Выберите один или несколько объектов, зажмите &lt;b&gt;%1&lt;/b&gt; - для множественного выбора, &lt;b&gt;Enter&lt;/b&gt; - закончить создание</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation>Выберите один или несколько объектов, зажмите  &lt;b&gt;%1&lt;/b&gt; - для множественного выбора, &lt;b&gt;Enter&lt;/b&gt; - подтвердить выбор</translation>
+        <translation type="vanished">Выберите один или несколько объектов, зажмите  &lt;b&gt;%1&lt;/b&gt; - для множественного выбора, &lt;b&gt;Enter&lt;/b&gt; - подтвердить выбор</translation>
     </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
@@ -7908,7 +7927,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>zoom fit best current pattern piece</source>
-        <translation>Уместить текущую выкройку</translation>
+        <translation>уместить текущую выкройку</translation>
     </message>
     <message>
         <source>Export details skiping the Layout stage</source>
@@ -8046,6 +8065,18 @@ Do you want to save your changes?</source>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8473,7 +8504,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>default unit</source>
-        <translation>Единица измерения по умолчанию</translation>
+        <translation>единица измерения по умолчанию</translation>
     </message>
     <message>
         <source>General</source>
@@ -8936,6 +8967,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation>Невозможно вычислить надсечку от точки &apos;%1&apos; до &apos;%2&apos;. Невозможно скорректировать позицию надсечки.</translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8948,6 +8983,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Ошибка</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Значение не может быть 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Значение не может быть меньше 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -9102,7 +9161,7 @@ This option will take an affect after restart.</source>
     <message>
         <source>user defined binary operator &quot;$TOK$&quot; conflicts with a built in operator.</source>
         <comment>Math parser error messages. Left untouched &quot;$TOK$&quot;</comment>
-        <translation>Определенный пользователем бинарный оператор &quot;$TOK$&quot; конфликтует с встроенным оператором.</translation>
+        <translation>определенный пользователем бинарный оператор &quot;$TOK$&quot; конфликтует с встроенным оператором.</translation>
     </message>
     <message>
         <source>Unexpected string token found at position $POS$.</source>
@@ -9262,7 +9321,7 @@ This option will take an affect after restart.</source>
     </message>
     <message>
         <source>In heights</source>
-        <translation>В высотах</translation>
+        <translation>В ростах</translation>
     </message>
     <message>
         <source>Details</source>
@@ -9290,7 +9349,7 @@ This option will take an affect after restart.</source>
     </message>
     <message>
         <source>In heights:</source>
-        <translation>В высотах:</translation>
+        <translation>В ростах:</translation>
     </message>
     <message>
         <source>Description:</source>
@@ -9346,11 +9405,11 @@ This option will take an affect after restart.</source>
     </message>
     <message>
         <source>Base height:</source>
-        <translation>Базовая высота:</translation>
+        <translation>Базовый рост:</translation>
     </message>
     <message>
         <source>Base height value</source>
-        <translation>Значение базовой высоты</translation>
+        <translation>Значение базового роста</translation>
     </message>
     <message>
         <source>Given name:</source>
@@ -9648,7 +9707,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>The height increase value of known measurement forbidden to change.</source>
-        <translation type="vanished">Нельзя изменить значение приращения высоты известной мерки.</translation>
+        <translation type="vanished">Нельзя изменить значение приращения роста известной мерки.</translation>
     </message>
     <message>
         <source>The full name of known measurement forbidden to change.</source>
@@ -9787,7 +9846,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>The lock file could not be created, for lack of permissions.</source>
-        <translation>lock файл не может быть создан, не хватает прав доступа.</translation>
+        <translation>Файл блокировки не может быть создан, не хватает прав доступа.</translation>
     </message>
     <message>
         <source>Unknown error happened, for instance a full partition prevented writing out the lock file.</source>
@@ -9827,7 +9886,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Height:</source>
-        <translation>Высота:</translation>
+        <translation>Рост:</translation>
     </message>
     <message>
         <source>Size:</source>
@@ -10270,6 +10329,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation>Пересечение 2 (только справа)</translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10813,47 +10884,107 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
-        <translation>Letter</translation>
+        <translation type="vanished">Letter</translation>
     </message>
     <message>
         <source>Legal</source>
-        <translation>Legal</translation>
+        <translation type="vanished">Legal</translation>
     </message>
     <message>
         <source>Roll 24in</source>
-        <translation>Рулон 24 дюйма</translation>
+        <translation type="vanished">Рулон 24 дюйма</translation>
     </message>
     <message>
         <source>Roll 30in</source>
-        <translation>Рулон 30 дюймов</translation>
+        <translation type="vanished">Рулон 30 дюймов</translation>
     </message>
     <message>
         <source>Roll 36in</source>
-        <translation>Рулон 36 дюймов</translation>
+        <translation type="vanished">Рулон 36 дюймов</translation>
     </message>
     <message>
         <source>Roll 42in</source>
-        <translation>Рулон 42 дюйма</translation>
+        <translation type="vanished">Рулон 42 дюйма</translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation>Рулон 44 дюйма</translation>
+        <translation type="vanished">Рулон 44 дюйма</translation>
     </message>
     <message>
         <source>Custom</source>
-        <translation>Клиент</translation>
+        <translation type="vanished">Клиент</translation>
     </message>
     <message>
         <source>Roll 48in</source>
-        <translation>Рулон 44 дюйма {не 48 ли?}</translation>
+        <translation type="vanished">Рулон 44 дюйма {не 48 ли?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
-        <translation>Рулон 44 дюйма {не 62 ли?}</translation>
+        <translation type="vanished">Рулон 44 дюйма {не 62 ли?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
-        <translation>Рулон 44 дюйма {не 72 ли?}</translation>
+        <translation type="vanished">Рулон 44 дюйма {не 72 ли?}</translation>
+    </message>
+    <message>
+        <source>Letter</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Legal</translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Roll 24in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Рулон 24 дюйма</translation>
+    </message>
+    <message>
+        <source>Roll 30in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Рулон 30 дюймов</translation>
+    </message>
+    <message>
+        <source>Roll 36in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Рулон 36 дюймов</translation>
+    </message>
+    <message>
+        <source>Roll 42in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Рулон 42 дюйма</translation>
+    </message>
+    <message>
+        <source>Roll 44in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Рулон 44 дюйма</translation>
+    </message>
+    <message>
+        <source>Roll 48in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Рулон 44 дюйма {не 48 ли?}</translation>
+    </message>
+    <message>
+        <source>Roll 62in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Рулон 44 дюйма {не 62 ли?}</translation>
+    </message>
+    <message>
+        <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished">Рулон 44 дюйма {не 72 ли?}</translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -11515,7 +11646,7 @@ Do you want to save your changes?</source>
     <name>VCommonSettings</name>
     <message>
         <source>measurements</source>
-        <translation>Мерки</translation>
+        <translation>мерки</translation>
     </message>
     <message>
         <source>individual</source>
@@ -13149,7 +13280,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>apply save detail options</source>
-        <translation>Применить &quot;сохранить параметры детали&quot;</translation>
+        <translation>применить &quot;сохранить параметры детали&quot;</translation>
     </message>
     <message>
         <source>multi deletion</source>
@@ -13167,6 +13298,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14315,7 +14450,7 @@ Do you want to save your changes?</source>
     <message>
         <source>height</source>
         <comment>placeholder</comment>
-        <translation>Рост</translation>
+        <translation>рост</translation>
     </message>
     <message>
         <source>C1LengthSpl_</source>
@@ -14673,19 +14808,27 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Сложная кривая&lt;/b&gt;: выберите три или больше точек,
+        <translation type="vanished">&lt;b&gt;Сложная кривая&lt;/b&gt;: выберите три или больше точек,
 &lt;b&gt;Enter&lt;/b&gt; - создать кривую</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Сложная кривая&lt;/b&gt;: выберите больше точек для завершения</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Пересечение кривой и дуги&lt;/b&gt;: угол = %1°; &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Enter&lt;/b&gt; - завершение создания</translation>
+        <translation type="vanished">&lt;b&gt;Пересечение кривой и дуги&lt;/b&gt;: угол = %1°; &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Enter&lt;/b&gt; - завершение создания</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14696,14 +14839,22 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Точка на расстоянии и под углом&lt;/b&gt;: угол = %1°, длина = %2%3; &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Enter&lt;/b&gt; - создание</translation>
+        <translation type="vanished">&lt;b&gt;Точка на расстоянии и под углом&lt;/b&gt;: угол = %1°, длина = %2%3; &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Enter&lt;/b&gt; - создание</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Пересечение линии и оси&lt;/b&gt;: угол = %1°; &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Enter&lt;/b&gt; - завершение создания</translation>
+        <translation type="vanished">&lt;b&gt;Пересечение линии и оси&lt;/b&gt;: угол = %1°; &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Enter&lt;/b&gt; - завершение создания</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14714,25 +14865,41 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
-        <translation>Длина = %1%2, угол = %3°, &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Mouse click&lt;/b&gt; - окончание выбора позиции</translation>
+        <translation type="vanished">Длина = %1%2, угол = %3°, &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Mouse click&lt;/b&gt; - окончание выбора позиции</translation>
     </message>
     <message>
         <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
-        <translation>Длина = %1%2, угол = %3°, угол вращения = %4°, &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;%5&lt;/b&gt; - сменить координаты точки вращения, &lt;b&gt;Mouse click&lt;/b&gt; - создание</translation>
+        <translation type="vanished">Длина = %1%2, угол = %3°, угол вращения = %4°, &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;%5&lt;/b&gt; - сменить координаты точки вращения, &lt;b&gt;Mouse click&lt;/b&gt; - создание</translation>
+    </message>
+    <message>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Угол поворота = %1°, &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Mouse click&lt;/b&gt; - создание</translation>
+        <translation type="vanished">Угол поворота = %1°, &lt;b&gt;Shift&lt;/b&gt; - фиксация угла, &lt;b&gt;Mouse click&lt;/b&gt; - создание</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Удерживайте &lt;b&gt;Shift&lt;/b&gt; для фиксации угла!</translation>
+        <translation type="vanished">Удерживайте &lt;b&gt;Shift&lt;/b&gt; для фиксации угла!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14743,11 +14910,19 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Сложная кривая&lt;/b&gt;: выберите три или больше точек, &lt;b&gt;Enter&lt;/b&gt; - завершение создания</translation>
+        <translation type="vanished">&lt;b&gt;Сложная кривая&lt;/b&gt;: выберите три или больше точек, &lt;b&gt;Enter&lt;/b&gt; - завершение создания</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Удерживайте &lt;b&gt;Shift&lt;/b&gt; для фиксации угла!</translation>
+        <translation type="vanished">Удерживайте &lt;b&gt;Shift&lt;/b&gt; для фиксации угла!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_uk_UA.ts

@@ -737,15 +737,15 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Помилка</translation>
+        <translation type="vanished">Помилка</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Радіус не може мати від&apos;ємне значення</translation>
+        <translation type="vanished">Радіус не може мати від&apos;ємне значення</translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>Довжина не може бути 0</translation>
+        <translation type="vanished">Довжина не може бути 0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -2106,11 +2106,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>Помилка</translation>
+        <translation type="vanished">Помилка</translation>
     </message>
     <message>
         <source>Radius can&apos;t be negative</source>
-        <translation>Радіус не може мати від&apos;ємне значення</translation>
+        <translation type="vanished">Радіус не може мати від&apos;ємне значення</translation>
     </message>
     <message>
         <source>Edit radius1</source>
@@ -4082,7 +4082,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Pattern</source>
-        <translation type="unfinished">Лекало</translation>
+        <translation>Лекало</translation>
     </message>
     <message>
         <source>For technical notes</source>
@@ -4384,7 +4384,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Виберіть об&apos;єкти основного контуру, &lt;b&gt;Shift&lt;/b&gt; - обернути напрямок кривої, &lt;b&gt;Enter&lt;/b&gt; - закінчити створення</translation>
+        <translation type="vanished">Виберіть об&apos;єкти основного контуру, &lt;b&gt;Shift&lt;/b&gt; - обернути напрямок кривої, &lt;b&gt;Enter&lt;/b&gt; - закінчити створення</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -4598,6 +4598,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation>Виключений</translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished">Поточна прибавка на шви</translation>
@@ -5522,7 +5538,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Виберіть об&apos;єкти основного контуру за годиниковою стрілкою, &lt;b&gt;Shift&lt;/b&gt; - обернути напрямок кривої, &lt;b&gt;Enter&lt;/b&gt; - закінчити створення</translation>
+        <translation type="vanished">Виберіть об&apos;єкти основного контуру за годиниковою стрілкою, &lt;b&gt;Shift&lt;/b&gt; - обернути напрямок кривої, &lt;b&gt;Enter&lt;/b&gt; - закінчити створення</translation>
     </message>
     <message>
         <source>Reverse</source>
@@ -5712,6 +5728,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished">&lt;Пусто&gt;</translation>
@@ -5979,11 +5999,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Помилка</translation>
+        <translation type="vanished">Помилка</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Довжина не може мати від&apos;ємне значення</translation>
+        <translation type="vanished">Довжина не може мати від&apos;ємне значення</translation>
     </message>
     <message>
         <source>Calculation</source>
@@ -6118,11 +6138,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Error</source>
-        <translation>Помилка</translation>
+        <translation type="vanished">Помилка</translation>
     </message>
     <message>
         <source>Length can&apos;t be negative</source>
-        <translation>Довжина не може мати від&apos;ємне значення</translation>
+        <translation type="vanished">Довжина не може мати від&apos;ємне значення</translation>
     </message>
     <message>
         <source>Not used</source>
@@ -6172,23 +6192,23 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>Помилка</translation>
+        <translation type="vanished">Помилка</translation>
     </message>
     <message>
         <source>Empty field</source>
-        <translation>Пусте поле</translation>
+        <translation type="vanished">Пусте поле</translation>
     </message>
     <message>
         <source>Value can&apos;t be 0</source>
-        <translation>Значення не може бути 0</translation>
+        <translation type="vanished">Значення не може бути 0</translation>
     </message>
     <message>
         <source>Value</source>
-        <translation>Значення</translation>
+        <translation type="vanished">Значення</translation>
     </message>
     <message>
         <source>Parser error: %1</source>
-        <translation>Помилка синтаксичного аналізу: %1</translation>
+        <translation type="vanished">Помилка синтаксичного аналізу: %1</translation>
     </message>
     <message>
         <source>First point</source>
@@ -6244,11 +6264,11 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation>Недійсний результат. Значення безкінечність чи NaN, перевірте ваші розрахунки.</translation>
+        <translation type="vanished">Недійсний результат. Значення безкінечність чи NaN, перевірте ваші розрахунки.</translation>
     </message>
     <message>
         <source>Value can&apos;t be less than 0</source>
-        <translation>Значення не може бути менше ніж 0</translation>
+        <translation type="vanished">Значення не може бути менше ніж 0</translation>
     </message>
 </context>
 <context>
@@ -7047,7 +7067,7 @@ Apply settings anyway?</source>
     </message>
     <message>
         <source>pattern</source>
-        <translation>Лекало</translation>
+        <translation>лекало</translation>
     </message>
     <message>
         <source>Save as</source>
@@ -7749,7 +7769,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation>Виберіть об&apos;єкти контуру, &lt;b&gt;Shift&lt;/b&gt; - обернути напрямок кривої</translation>
+        <translation type="vanished">Виберіть об&apos;єкти контуру, &lt;b&gt;Shift&lt;/b&gt; - обернути напрямок кривої</translation>
     </message>
     <message>
         <source>The document has no write permissions.</source>
@@ -7857,11 +7877,11 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>Виберіть один чи більше об&apos;єктів, затисніть &lt;b&gt;%1&lt;/b&gt; - масового вибору, &lt;b&gt;Enter&lt;/b&gt; - завершити створення</translation>
+        <translation type="vanished">Виберіть один чи більше об&apos;єктів, затисніть &lt;b&gt;%1&lt;/b&gt; - масового вибору, &lt;b&gt;Enter&lt;/b&gt; - завершити створення</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation>Виберіть один чи більше об&apos;єктів, затисніть &lt;b&gt;%1&lt;/b&gt; - масового вибору, &lt;b&gt;Enter&lt;/b&gt; - завершити створення</translation>
+        <translation type="vanished">Виберіть один чи більше об&apos;єктів, затисніть &lt;b&gt;%1&lt;/b&gt; - масового вибору, &lt;b&gt;Enter&lt;/b&gt; - завершити створення</translation>
     </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
@@ -8039,6 +8059,18 @@ Do you want to save your changes?</source>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -8140,7 +8172,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>Pattern</source>
-        <translation type="unfinished">Лекало</translation>
+        <translation>Лекало</translation>
     </message>
     <message>
         <source>Name</source>
@@ -8928,6 +8960,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -8940,6 +8976,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">Помилка</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished">Недійсний результат. Значення безкінечність чи NaN, перевірте ваші розрахунки.</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished">Значення не може бути 0</translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished">Значення не може бути менше ніж 0</translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished">Помилка синтаксичного аналізу: %1</translation>
+    </message>
 </context>
 <context>
     <name>QSaveFile</name>
@@ -10250,6 +10310,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -10793,48 +10865,64 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Лист</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Legal</translation>
     </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Рулон 24 дюйми</translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Рулон 30 дюймів</translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Рулон 36 дюймів</translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Рулон 42 дюйми</translation>
     </message>
     <message>
         <source>Roll 44in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Рулон 44 дюйми</translation>
     </message>
-    <message>
-        <source>Custom</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Рулон 44 дюйми {48i?}</translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Рулон 44 дюйми {62i?}</translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">Рулон 44 дюйми {72i?}</translation>
     </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VAbstractNode</name>
@@ -13146,6 +13234,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -14647,18 +14739,26 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Складна крива&lt;/b&gt;: виберіть сім чи більше точок, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
+        <translation type="vanished">&lt;b&gt;Складна крива&lt;/b&gt;: виберіть сім чи більше точок, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation>&lt;b&gt;Складна крива&lt;/b&gt;: виберіть більше точок для завершення сегменту</translation>
     </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Перетин кривої і осі&lt;/b&gt;: кут =%1°; &lt;b&gt;Shift&lt;/b&gt; - фіксація кута, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
+        <translation type="vanished">&lt;b&gt;Перетин кривої і осі&lt;/b&gt;: кут =%1°; &lt;b&gt;Shift&lt;/b&gt; - фіксація кута, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14669,14 +14769,22 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Точка на кінці відрізка&lt;/b&gt;: кут =%1°, довжина = %2%3; &lt;b&gt;Shift&lt;/b&gt; - фіксація кута, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
+        <translation type="vanished">&lt;b&gt;Точка на кінці відрізка&lt;/b&gt;: кут =%1°, довжина = %2%3; &lt;b&gt;Shift&lt;/b&gt; - фіксація кута, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
         <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Перетин лінії і осі&lt;/b&gt;: кут =%1°; &lt;b&gt;Shift&lt;/b&gt; - фіксація кута, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
+        <translation type="vanished">&lt;b&gt;Перетин лінії і осі&lt;/b&gt;: кут =%1°; &lt;b&gt;Shift&lt;/b&gt; - фіксація кута, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14686,11 +14794,11 @@ Do you want to save your changes?</source>
         <translation type="vanished">Довжина = %1%2, кут = %3°, &lt;b&gt;Shift&lt;/b&gt; - фіксація кута, &lt;b&gt;Клік мишею&lt;/b&gt; - завершення створення</translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -14698,14 +14806,22 @@ Do you want to save your changes?</source>
     <name>VisToolRotation</name>
     <message>
         <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
-        <translation>Кут повороту = %1°, &lt;b&gt;Shift&lt;/b&gt; - фіксація кута, &lt;b&gt;Клік мишею&lt;/b&gt; - завершення створення</translation>
+        <translation type="vanished">Кут повороту = %1°, &lt;b&gt;Shift&lt;/b&gt; - фіксація кута, &lt;b&gt;Клік мишею&lt;/b&gt; - завершення створення</translation>
+    </message>
+    <message>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Використовуйте &lt;b&gt;Shift&lt;/b&gt; для фіксації кутів!</translation>
+        <translation type="vanished">Використовуйте &lt;b&gt;Shift&lt;/b&gt; для фіксації кутів!</translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
@@ -14716,11 +14832,19 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation>&lt;b&gt;Складна крива&lt;/b&gt;: виберіть три чи більше точок, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
+        <translation type="vanished">&lt;b&gt;Складна крива&lt;/b&gt;: виберіть три чи більше точок, &lt;b&gt;Enter&lt;/b&gt; - завершення створення</translation>
     </message>
     <message>
         <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
-        <translation>Використовуйте &lt;b&gt;Shift&lt;/b&gt; для фіксації кутів!</translation>
+        <translation type="vanished">Використовуйте &lt;b&gt;Shift&lt;/b&gt; для фіксації кутів!</translation>
+    </message>
+    <message>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
+        <translation type="unfinished"></translation>
     </message>
 </context>
 <context>

share/translations/valentina_zh_CN.ts

@@ -532,15 +532,11 @@
     </message>
     <message>
         <source>Error</source>
-        <translation>错误</translation>
+        <translation type="vanished">错误</translation>
-    </message>
-    <message>
-        <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Length can&apos;t be equal 0</source>
-        <translation>长度不能是0</translation>
+        <translation type="vanished">长度不能是0</translation>
     </message>
     <message>
         <source>Radius:</source>
@@ -1491,14 +1487,6 @@
         <source>Color:</source>
         <translation type="unfinished">颜色:</translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">错误</translation>
-    </message>
-    <message>
-        <source>Radius can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Edit radius1</source>
         <translation type="unfinished"></translation>
@@ -3299,10 +3287,6 @@ Apply settings anyway?</source>
         <source>Angle:</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select main path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished"></translation>
@@ -3511,6 +3495,22 @@ Apply settings anyway?</source>
         <source>Excluded</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks inside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Current seam allowance</source>
         <translation type="unfinished"></translation>
@@ -4239,10 +4239,6 @@ Apply settings anyway?</source>
         <source>Grainline</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select main path objects clockwise, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Reverse</source>
         <translation type="unfinished"></translation>
@@ -4431,6 +4427,10 @@ Apply settings anyway?</source>
         <source>To open all detail&apos;s features complete creating the main path. Please, press OK.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>&lt;Empty&gt;</source>
         <translation type="unfinished"></translation>
@@ -4648,14 +4648,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">错误</translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Calculation</source>
         <translation type="unfinished">打算</translation>
@@ -4751,14 +4743,6 @@ Apply settings anyway?</source>
         <source>Edit second control point length</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error</source>
-        <translation type="unfinished">错误</translation>
-    </message>
-    <message>
-        <source>Length can&apos;t be negative</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Not used</source>
         <translation type="unfinished"></translation>
@@ -4805,23 +4789,7 @@ Apply settings anyway?</source>
     <name>DialogTool</name>
     <message>
         <source>Error</source>
-        <translation>错误</translation>
+        <translation type="vanished">错误</translation>
-    </message>
-    <message>
-        <source>Empty field</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be 0</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Parser error: %1</source>
-        <translation type="unfinished"></translation>
     </message>
     <message>
         <source>First point</source>
@@ -4871,14 +4839,6 @@ Apply settings anyway?</source>
         <source>by second edge right angle</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Value can&apos;t be less than 0</source>
-        <translation type="unfinished"></translation>
-    </message>
 </context>
 <context>
     <name>DialogTriangle</name>
@@ -6035,10 +5995,6 @@ Do you want to save your changes?</source>
         <source>Select main path objects clockwise.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select path objects, &lt;b&gt;Shift&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>The document has no write permissions.</source>
         <translation type="unfinished"></translation>
@@ -6143,14 +6099,6 @@ Do you want to save your changes?</source>
         <source>Forum</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;Enter&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
-    </message>
     <message>
         <source>Open Tape app for creating or editing measurements file</source>
         <translation type="unfinished"></translation>
@@ -6327,6 +6275,18 @@ Do you want to save your changes?</source>
         <source>Ctrl+O</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Cannot read settings from a malformed .INI file.</source>
         <translation type="unfinished"></translation>
@@ -7022,6 +6982,10 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
+        <translation type="unfinished"></translation>
+    </message>
     <message>
         <source>Piece &apos;%1&apos;. Not enough points to build seam allowance.</source>
         <translation type="unfinished"></translation>
@@ -7034,6 +6998,30 @@ This option will take an affect after restart.</source>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Error</source>
+        <translation type="unfinished">错误</translation>
+    </message>
+    <message>
+        <source>Empty formula</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Invalid result. Value is infinite or NaN. Please, check your calculations.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Value can&apos;t be less than 0</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Parser error: %1</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>QmuParser</name>
@@ -8186,6 +8174,18 @@ Do you want to save your changes?</source>
         <source>Intersection 2 (only right)</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Acute angle that looks intside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Acute angle that looks outside of piece</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>V mark 2</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>TabPaths</name>
@@ -8626,46 +8626,62 @@ Do you want to save your changes?</source>
     <name>VAbstractLayoutDialog</name>
     <message>
         <source>Letter</source>
+        <comment>Paper format</comment>
         <translation type="unfinished">信</translation>
     </message>
     <message>
         <source>Legal</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Tabloid</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 24in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 30in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 36in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 42in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 44in</source>
-        <translation type="unfinished"></translation>
+        <comment>Paper format</comment>
-    </message>
-    <message>
-        <source>Custom</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 48in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 62in</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <source>Roll 72in</source>
+        <comment>Paper format</comment>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <source>Custom</source>
+        <comment>Paper format</comment>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -10612,6 +10628,10 @@ Do you want to save your changes?</source>
         <source>This id (%1) is not unique.</source>
         <translation type="unfinished"></translation>
     </message>
+    <message>
+        <source>Tool was used after deleting.</source>
+        <translation type="unfinished"></translation>
+    </message>
 </context>
 <context>
     <name>VToolShoulderPoint</name>
@@ -11972,57 +11992,57 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select more points for complete segment</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select seven or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolCurveIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection curve and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolEndLine</name>
     <message>
-        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Point at distance and angle&lt;/b&gt;: angle = %1°, length = %2%3; &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolLineIntersectAxis</name>
     <message>
-        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Intersection line and axis&lt;/b&gt;: angle = %1°; &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;%3&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolMove</name>
     <message>
-        <source>Length = %1%2, angle = %3°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
+        <source>Length = %1%2, angle = %3°, &lt;b&gt;%4&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish selecting a position</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;%5&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
+        <source>Length = %1%2, angle = %3°, rotation angle = %4°, &lt;b&gt;%5&lt;/b&gt; - sticking angle, &lt;b&gt;%6&lt;/b&gt; - change rotation origin point, &lt;b&gt;Mouse click&lt;/b&gt; - finish creating</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolRotation</name>
     <message>
-        <source>Rotating angle = %1°, &lt;b&gt;Shift&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
+        <source>Rotating angle = %1°, &lt;b&gt;%2&lt;/b&gt; - sticking angle, &lt;b&gt;Mouse click&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
 <context>
     <name>VisToolSpline</name>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>
@@ -12033,11 +12053,11 @@ Do you want to save your changes?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;Enter&lt;/b&gt; - finish creation</source>
+        <source>&lt;b&gt;Curved path&lt;/b&gt;: select three or more points, &lt;b&gt;%1&lt;/b&gt; - finish creation</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <source>Use &lt;b&gt;Shift&lt;/b&gt; for sticking angle!</source>
+        <source>Use &lt;b&gt;%1&lt;/b&gt; for sticking angle!</source>
         <translation type="unfinished"></translation>
     </message>
 </context>