diff --git a/src/libs/vpatterndb/vtranslatemeasurements.cpp b/src/libs/vpatterndb/vtranslatemeasurements.cpp index 2cb5f435c..078b1672b 100644 --- a/src/libs/vpatterndb/vtranslatemeasurements.cpp +++ b/src/libs/vpatterndb/vtranslatemeasurements.cpp @@ -174,7 +174,7 @@ void VTranslateMeasurements::InitGroupA() m = QmuTranslation::translate("Measurements", "height", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Total", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from crown of head to floor", + d = QmuTranslation::translate("Measurements", "Vertical distance from crown of head to floor.", "Full measurement description."); InitMeasurement(height_M, m, g, d, "A01"); //================================================================================================================= @@ -182,14 +182,14 @@ void VTranslateMeasurements::InitGroupA() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Neck Back", "Full measurement name."); d = QmuTranslation::translate("Measurements", - "Vertical distance from the Neck Back (cervicale vertebra) to the floor", + "Vertical distance from the Neck Back (cervicale vertebra) to the floor.", "Full measurement description."); InitMeasurement(heightNeckBack_M, m, g, d, "A02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_scapula", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Scapula", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from the Scapula (Blade point) to the floor", + d = QmuTranslation::translate("Measurements", "Vertical distance from the Scapula (Blade point) to the floor.", "Full measurement description."); InitMeasurement(heightScapula_M, m, g, d, "A03"); //================================================================================================================= @@ -203,7 +203,7 @@ void VTranslateMeasurements::InitGroupA() m = QmuTranslation::translate("Measurements", "height_waist_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Waist Side", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from the Waist Side to the floor", + d = QmuTranslation::translate("Measurements", "Vertical distance from the Waist Side to the floor.", "Full measurement description."); InitMeasurement(heightWaistSide_M, m, g, d, "A05"); //================================================================================================================= @@ -218,20 +218,20 @@ void VTranslateMeasurements::InitGroupA() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Gluteal Fold", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from the Gluteal fold, where the Gluteal muscle " - "meets the top of the back thigh, to the floor", "Full measurement description."); + "meets the top of the back thigh, to the floor.", "Full measurement description."); InitMeasurement(heightGlutealFold_M, m, g, d, "A07"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_knee", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Knee", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from the fold at the back of the Knee to " - "the floor", "Full measurement description."); + "the floor.", "Full measurement description."); InitMeasurement(heightKnee_M, m, g, d, "A08"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_calf", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Calf", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from the widest point of the calf to the floor", + d = QmuTranslation::translate("Measurements", "Vertical distance from the widest point of the calf to the floor.", "Full measurement description."); InitMeasurement(heightCalf_M, m, g, d, "A09"); //================================================================================================================= @@ -239,55 +239,55 @@ void VTranslateMeasurements::InitGroupA() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Ankle High", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from the deepest indentation of the back of the " - "ankle to the floor", "Full measurement description."); + "ankle to the floor.", "Full measurement description."); InitMeasurement(heightAnkleHigh_M, m, g, d, "A10"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_ankle", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Ankle", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from point where the front leg meets the foot " - "to the floor", "Full measurement description."); + "to the floor.", "Full measurement description."); InitMeasurement(heightAnkle_M, m, g, d, "A11"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_highhip", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Highhip", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from the Highhip level, where front abdomen is " - "most prominent, to the floor", "Full measurement description."); + "most prominent, to the floor.", "Full measurement description."); InitMeasurement(heightHighhip_M, m, g, d, "A12"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_waist_front", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Waist Front", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from the Waist Front to the floor", + d = QmuTranslation::translate("Measurements", "Vertical distance from the Waist Front to the floor.", "Full measurement description."); InitMeasurement(heightWaistFront_M, m, g, d, "A13"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_bustpoint", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Bustpoint", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from Bustpoint to the floor", + d = QmuTranslation::translate("Measurements", "Vertical distance from Bustpoint to the floor.", "Full measurement description."); InitMeasurement(heightBustpoint_M, m, g, d, "A14"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_shoulder_tip", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Shoulder Tip", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from the Shoulder Tip to the floor", + d = QmuTranslation::translate("Measurements", "Vertical distance from the Shoulder Tip to the floor.", "Full measurement description."); InitMeasurement(heightShoulderTip_M, m, g, d, "A15"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_neck_front", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Neck Front", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from the Neck Front to the floor", + d = QmuTranslation::translate("Measurements", "Vertical distance from the Neck Front to the floor.", "Full measurement description."); InitMeasurement(heightNeckFront_M, m, g, d, "A16"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_neck_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Neck Side", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from the Neck Side to the floor", + d = QmuTranslation::translate("Measurements", "Vertical distance from the Neck Side to the floor.", "Full measurement description."); InitMeasurement(heightNeckSide_M, m, g, d, "A17"); //================================================================================================================= @@ -295,20 +295,20 @@ void VTranslateMeasurements::InitGroupA() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Neck Back to Knee", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from the Neck Back (cervicale vertebra) to the " - "fold at the back of the knee", "Full measurement description."); + "fold at the back of the knee.", "Full measurement description."); InitMeasurement(heightNeckBackToKnee_M, m, g, d, "A18", "(height_neck_back - height_knee)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_waist_side_to_knee", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Waist Side to Knee", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from the Waist Side to the fold at the back of " - "the knee", "Full measurement description."); + "the knee.", "Full measurement description."); InitMeasurement(heightWaistSideToKnee_M, m, g, d, "A19", "(height_waist_side - height_knee)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "height_waist_side_to_hip", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Waist Side to Hip", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from the Waist Side to the Hip level", + d = QmuTranslation::translate("Measurements", "Vertical distance from the Waist Side to the Hip level.", "Full measurement description."); InitMeasurement(heightWaistSideToHip_M, m, g, d, "A20", "(height_waist_side - height_hip)"); //================================================================================================================= @@ -316,7 +316,7 @@ void VTranslateMeasurements::InitGroupA() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Height: Knee to Ankle", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from the fold at the back of the knee to the " - "point where the front leg meets the top of the foot", + "point where the front leg meets the top of the foot.", "Full measurement description."); InitMeasurement(heightKneeToAnkle_M, m, g, d, "A21"); //================================================================================================================= @@ -335,28 +335,28 @@ void VTranslateMeasurements::InitGroupB() m = QmuTranslation::translate("Measurements", "width_shoulder", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Width: Shoulder", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Horizontal distance from Shoulder Tip to Shoulder Tip", + d = QmuTranslation::translate("Measurements", "Horizontal distance from Shoulder Tip to Shoulder Tip.", "Full measurement description."); InitMeasurement(widthShoulder_M, m, g, d, "B01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "width_bust", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Width: Bust", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Horizontal distance from Bust Side to Bust Side", + d = QmuTranslation::translate("Measurements", "Horizontal distance from Bust Side to Bust Side.", "Full measurement description."); InitMeasurement(widthBust_M, m, g, d, "B02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "width_waist", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Width: Waist", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Horizontal distance from Waist Side to Waist Side", + d = QmuTranslation::translate("Measurements", "Horizontal distance from Waist Side to Waist Side.", "Full measurement description."); InitMeasurement(widthWaist_M, m, g, d, "B03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "width_hip", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Width: Hip", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Horizontal distance from Hip Side to Hip Side", + d = QmuTranslation::translate("Measurements", "Horizontal distance from Hip Side to Hip Side.", "Full measurement description."); InitMeasurement(widthHip_M, m, g, d, "B04"); //================================================================================================================= @@ -364,7 +364,7 @@ void VTranslateMeasurements::InitGroupB() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Width: Abdomen to Hip", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Horizontal distance from the greatest abdomen prominence to the " - "greatest hip prominence", "Full measurement description."); + "greatest hip prominence.", "Full measurement description."); InitMeasurement(widthAbdomenToHip_M, m, g, d, "B05"); //================================================================================================================= } @@ -382,7 +382,7 @@ void VTranslateMeasurements::InitGroupC() m = QmuTranslation::translate("Measurements", "indent_neck_back", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Indent: Neck Back", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Horizontal distance from Scapula (Blade point) to the Neck Back", + d = QmuTranslation::translate("Measurements", "Horizontal distance from Scapula (Blade point) to the Neck Back.", "Full measurement description."); InitMeasurement(indentNeckBack_M, m, g, d, "C01"); //================================================================================================================= @@ -390,14 +390,14 @@ void VTranslateMeasurements::InitGroupC() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Indent: Waist Back", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Horizontal distance between a flat stick, placed to touch Hip " - "and Scapula, and Waist Back", "Full measurement description."); + "and Scapula, and Waist Back.", "Full measurement description."); InitMeasurement(indentWaistBack_M, m, g, d, "C02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "indent_ankle_high", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Indent: Ankle High", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Horizontal Distance betwee a flat stick, placed perpendicular " - "to Heel, and the greatest indentation of Ankle", "Full measurement description."); + "to Heel, and the greatest indentation of Ankle.", "Full measurement description."); InitMeasurement(indentAnkleHigh_M, m, g, d, "C03"); //================================================================================================================= } @@ -415,7 +415,7 @@ void VTranslateMeasurements::InitGroupD() m = QmuTranslation::translate("Measurements", "neck_mid_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Middle Circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Middle Neck circumference, roughtly halfway between jaw and torso", + d = QmuTranslation::translate("Measurements", "Middle Neck circumference, roughtly halfway between jaw and torso.", "Full measurement description."); InitMeasurement(neckMidCirc_M, m, g, d, "D01"); //================================================================================================================= @@ -423,21 +423,21 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Neck circumference, at base of neck, from Neck Back through Neck " - "Sides and Neck Front", "Full measurement description."); + "Sides and Neck Front.", "Full measurement description."); InitMeasurement(neckCirc_M, m, g, d, "D02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "highbust_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust Circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Circumference at Highbust, following shortest distance between " - "Armfolds across chest, parallel to floor under arms and across back", + "Armfolds across chest, parallel to floor under arms and across back.", "Full measurement description."); InitMeasurement(highbustCirc_M, m, g, d, "D03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bust_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bust Circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Circumference around Bust, parallel to floor", + d = QmuTranslation::translate("Measurements", "Circumference around Bust, parallel to floor.", "Full measurement description."); InitMeasurement(bustCirc_M, m, g, d, "D04"); //================================================================================================================= @@ -445,14 +445,14 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Lowbust Circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Circumference around LowBust, around the ribs just under the " - "breasts, parallel to floor", "Full measurement description."); + "breasts, parallel to floor.", "Full measurement description."); InitMeasurement(lowbustCirc_M, m, g, d, "D05"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "rib_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Rib Circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Circumference around Ribs at level of the lowest rib at the " - "side, parallel to floor", "Full measurement description."); + "side, parallel to floor.", "Full measurement description."); InitMeasurement(ribCirc_M, m, g, d, "D06"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_circ", @@ -467,14 +467,14 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highhip Circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Circumference around Highhip, where Abdomen protrusion is " - "greatest, parallel to floor", "Full measurement description."); + "greatest, parallel to floor.", "Full measurement description."); InitMeasurement(highhipCirc_M, m, g, d, "D08"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "hip_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hip Circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Circumference around Hip, where Hip protrusion is greatest, " - "parallel to floor", "Full measurement description."); + "parallel to floor.", "Full measurement description."); InitMeasurement(hipCirc_M, m, g, d, "D09"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_arc_f", @@ -488,7 +488,7 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust Arc (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Highbust Side (Armpit) to HIghbust Side (Armpit) across " - "chest. Calculate as (Highbust circumference - Highbust arc (back))", + "chest. Calculate as (Highbust circumference - Highbust arc (back)).", "Full measurement description."); InitMeasurement(highbustArcF_M, m, g, d, "D11", "(highbust_circ - highbust_arc_b)"); //================================================================================================================= @@ -496,62 +496,62 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bust Arc (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Bust Side to Bust Side across chest. Calculate as " - "(Bust circumference - Bust arc (back))", "Full measurement description."); + "(Bust circumference - Bust arc (back)).", "Full measurement description."); InitMeasurement(bustArcF_M, m, g, d, "D12", "(bust_circ – bust_arc_b)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "lowbust_arc_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Lowbust Arc (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Lowbust Side to Lowbust Side across Front", + d = QmuTranslation::translate("Measurements", "From Lowbust Side to Lowbust Side across Front.", "Full measurement description."); InitMeasurement(lowbustArcF_M, m, g, d, "D13"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "rib_arc_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Rib Arc (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Rib Side to Rib Side across front", + d = QmuTranslation::translate("Measurements", "From Rib Side to Rib Side across front.", "Full measurement description."); InitMeasurement(ribArcF_M, m, g, d, "D14"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_arc_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist Arc (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Waist Side to Waist Side across front", + d = QmuTranslation::translate("Measurements", "From Waist Side to Waist Side across front.", "Full measurement description."); InitMeasurement(waistArcF_M, m, g, d, "D15"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "highhip_arc_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highhip Arc (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Highhip Side to Highhip Side across front", + d = QmuTranslation::translate("Measurements", "From Highhip Side to Highhip Side across front.", "Full measurement description."); InitMeasurement(highhipArcF_M, m, g, d, "D16"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "hip_arc_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hip Arc (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Hip Side to Hip Side across Front", + d = QmuTranslation::translate("Measurements", "From Hip Side to Hip Side across Front.", "Full measurement description."); InitMeasurement(hipArcF_M, m, g, d, "D17"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_arc_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Arc (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Side to Neck Side across back", + d = QmuTranslation::translate("Measurements", "From Neck Side to Neck Side across back.", "Full measurement description."); InitMeasurement(neckArcB_M, m, g, d, "D18"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "highbust_arc_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust Arc (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Highbust Side (Armpit) to Highbust Side (Armpit) across back", + d = QmuTranslation::translate("Measurements", "From Highbust Side (Armpit) to Highbust Side (Armpit) across back.", "Full measurement description."); InitMeasurement(highbustArcB_M, m, g, d, "D19"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bust_arc_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bust Arc (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Bust Side to Bust Side across back", + d = QmuTranslation::translate("Measurements", "From Bust Side to Bust Side across back.", "Full measurement description."); InitMeasurement(bustArcB_M, m, g, d, "D20"); //================================================================================================================= @@ -559,41 +559,41 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Lowbust Arc (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Lowbust Side to Lowbust Side across back. Calculate as " - "(Lowbust circumference - Lowbust arc (front))", "Full measurement description."); + "(Lowbust circumference - Lowbust arc (front)).", "Full measurement description."); InitMeasurement(lowbustArcB_M, m, g, d, "D21", "(lowbust_circ - lowbust_arc_f)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "rib_arc_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Rib Arc (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Rib Side to Rib side across back. Calculate as " - "(Rib circumference - Rib arc (front))", "Full measurement description."); + "(Rib circumference - Rib arc (front)).", "Full measurement description."); InitMeasurement(ribArcB_M, m, g, d, "D22", "(rib_circ - rib_arc_f)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_arc_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist Arc (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Waist Side to Waist Side across back. Calculate as " - "(Waist circumference - Waist arc (front))", "Full measurement description."); + "(Waist circumference - Waist arc (front)).", "Full measurement description."); InitMeasurement(waistArcB_M, m, g, d, "D23", "(waist_circ - waist_arc_f)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "highhip_arc_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highhip Arc (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Highhip Side to Highhip Side across back. Calculate as " - "(Highhip circumference - Highhip Arc (front))", "Full measurement description."); + "(Highhip circumference - Highhip Arc (front)).", "Full measurement description."); InitMeasurement(highhipArcB_M, m, g, d, "D24", "(highhip_circ - highhip_arc_f)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "hip_arc_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hip Arc (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Hip Side to Hip Side across back. Calculate as " - "(Hip circumference - Hip arc (front))", "Full measurement description."); + "(Hip circumference - Hip arc (front)).", "Full measurement description."); InitMeasurement(hipArcB_M, m, g, d, "D25", "(hip_circ - hip_arc_f)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_arc_half_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Arc, Half (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Front to Neck Side. Calculate as (Neck Arc (front)/2)", + d = QmuTranslation::translate("Measurements", "From Neck Front to Neck Side. Calculate as (Neck Arc (front)/2).", "Full measurement description."); InitMeasurement(neckArcHalfF_M, m, g, d, "D26", "(neck_arc_f/2)"); //================================================================================================================= @@ -601,13 +601,13 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust Arc, Half (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Highbust Front to Highbust Side. Calculate as " - "(Highbust Arc (front)/2)", "Full measurement description."); + "(Highbust Arc (front)/2).", "Full measurement description."); InitMeasurement(highbustArcHalfF_M, m, g, d, "D27", "(highbust_arc_f/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bust_arc_half_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bust Arc, Half (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Bust Front to Bust Side. Calculate as (Bust Arc (front)/2)", + d = QmuTranslation::translate("Measurements", "From Bust Front to Bust Side. Calculate as (Bust Arc (front)/2).", "Full measurement description."); InitMeasurement(bustArcHalfF_M, m, g, d, "D28", "(bust_arc_f/2)"); //================================================================================================================= @@ -615,13 +615,13 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Lowbust Arc, Half (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Lowbust Front to Lowbust Side. Calculate as " - "(Lowbust Arc (front)/2)", "Full measurement description."); + "(Lowbust Arc (front)/2).", "Full measurement description."); InitMeasurement(lowbustArcHalfF_M, m, g, d, "D29", "(lowbust_arc_f/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "rib_arc_half_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Rib Arc, Half (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Rib Front to Rib Side. Calculate as (Rib Arc (front) / 2)", + d = QmuTranslation::translate("Measurements", "From Rib Front to Rib Side. Calculate as (Rib Arc (front) / 2).", "Full measurement description."); InitMeasurement(ribArcHalfF_M, m, g, d, "D30", "(rib_arc_f/2)"); //================================================================================================================= @@ -629,27 +629,27 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist Arc, Half (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Waist Front to Waist Side. Calculate as " - "(Waist Arc (front) / 2)", "Full measurement description."); + "(Waist Arc (front) / 2).", "Full measurement description."); InitMeasurement(waistArcHalfF_M, m, g, d, "D31", "(waist_arc_f/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "highhip_arc_half_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highhip Arc, Half (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Highhip Front to Highhip Side. Calculate as " - "(Highhip Arc (front ) / 2)", "Full measurement description."); + "(Highhip Arc (front ) / 2).", "Full measurement description."); InitMeasurement(highhipArcHalfF_M, m, g, d, "D32", "(highhip_arc_f/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "hip_arc_half_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hip Arc, Half (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Hip Front to Hip Side. Calculate as (Hip Arc (front) / 2)", + d = QmuTranslation::translate("Measurements", "From Hip Front to Hip Side. Calculate as (Hip Arc (front) / 2).", "Full measurement description."); InitMeasurement(hipArcHalfF_M, m, g, d, "D33", "(hip_arc_f/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_arc_half_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Arc, Half (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Back to Neck Side. Calculate as (Neck Arc (back) / 2)", + d = QmuTranslation::translate("Measurements", "From Neck Back to Neck Side. Calculate as (Neck Arc (back) / 2).", "Full measurement description."); InitMeasurement(neckArcHalfB_M, m, g, d, "D34", "(neck_arc_b/2)"); //================================================================================================================= @@ -657,13 +657,13 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust Arc, Half (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Highbust Back to Highbust Side. Calculate as " - "(Highbust Arc (back) / 2)", "Full measurement description."); + "(Highbust Arc (back) / 2).", "Full measurement description."); InitMeasurement(highbustArcHalfB_M, m, g, d, "D35", "(highbust_arc_b/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bust_arc_half_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bust Arc, Half (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Bust Back to Bust Side. Calculate as (Bust Arc (back) / 2)", + d = QmuTranslation::translate("Measurements", "From Bust Back to Bust Side. Calculate as (Bust Arc (back) / 2).", "Full measurement description."); InitMeasurement(bustArcHalfB_M, m, g, d, "D36", "(bust_arc_b/2)"); //================================================================================================================= @@ -671,13 +671,13 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Lowbust Arc, Half (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Lowbust Back to Lowbust Side. Calculate as " - "(Lowbust Arc (back) / 2)", "Full measurement description."); + "(Lowbust Arc (back) / 2).", "Full measurement description."); InitMeasurement(lowbustArcHalfB_M, m, g, d, "D37", "(lowbust_arc_b/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "rib_arc_half_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Rib Arc, Half (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Rib Back to Highbust Side. Calculate as (Rib Arc (back) / 2)", + d = QmuTranslation::translate("Measurements", "From Rib Back to Highbust Side. Calculate as (Rib Arc (back) / 2).", "Full measurement description."); InitMeasurement(ribArcHalfB_M, m, g, d, "D38", "(rib_arc_b/2)"); //================================================================================================================= @@ -685,27 +685,27 @@ void VTranslateMeasurements::InitGroupD() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist Arc, Half (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Waist Back to Waist Side. Calculate as " - "(Waist Arc (back) / 2)", "Full measurement description."); + "(Waist Arc (back) / 2).", "Full measurement description."); InitMeasurement(waistArcHalfB_M, m, g, d, "D39", "(waist_arc_b/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "highhip_arc_half_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highhip Arc, Half (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Highhip Back to Highbust Side. Calculate as " - "(Highhip Arc (back) / 2)", "Full measurement description."); + "(Highhip Arc (back) / 2).", "Full measurement description."); InitMeasurement(highhipArcHalfB_M, m, g, d, "D40", "(highhip_arc_b/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "hip_arc_half_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hip Arc, Half (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Hip Back to Highbust Side. Calculate as (Hip Arc (back) / 2)", + d = QmuTranslation::translate("Measurements", "From Hip Back to Highbust Side. Calculate as (Hip Arc (back) / 2).", "Full measurement description."); InitMeasurement(hipArcHalfB_M, m, g, d, "D41", "(hip_arc_b/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "hip_with_abdomen_arc", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hip with Abdomen Arc (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Curve stiff paper around front of abdomen, tape at sides. " + d = QmuTranslation::translate("Measurements", "Curve stiff paper around front of abdomen, tape at sides. " "Measure from Hip Side to Hip Side over paper across front.", "Full measurement description."); InitMeasurement(hipWithAbdomenArcF_M, m, g, d, "D42"); @@ -713,21 +713,21 @@ void VTranslateMeasurements::InitGroupD() m = QmuTranslation::translate("Measurements", "body_armfold_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Body Circumference at Armfold level", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Measure around arms and torso at Armfold level", + d = QmuTranslation::translate("Measurements", "Measure around arms and torso at Armfold level.", "Full measurement description."); InitMeasurement(bodyArmfoldCirc_M, m, g, d, "D43"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "body_bust_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Body Circumference at Bust level", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Measure around arms and torso at Bust level", + d = QmuTranslation::translate("Measurements", "Measure around arms and torso at Bust level.", "Full measurement description."); InitMeasurement(bodyBustCirc_M, m, g, d, "D44"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "body_torso_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Body Circumference around Full Torso", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Measure from mid-shoulder around crotch", + d = QmuTranslation::translate("Measurements", "Measure from mid-shoulder around crotch.", "Full measurement description."); InitMeasurement(bodyTorsoCirc_M, m, g, d, "D45"); //================================================================================================================= @@ -746,224 +746,226 @@ void VTranslateMeasurements::InitGroupE() m = QmuTranslation::translate("Measurements", "neck_front_to_waist_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Front to Waist (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Front to Waist (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Front to Waist (front).", "Full measurement description."); InitMeasurement(neckFrontToWaistF_M, m, g, d, "E01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_front_to_waist_flat_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Front to Waist, Flat (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Front to Waist, Flat (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Front to Waist, Flat (front).", + "Full measurement description."); InitMeasurement(neckFrontToWaistFlatF_M, m, g, d, "E02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "armpit_to_waist_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust Side (Armpit) to Waist Side", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Highbust Side (Armpit) to Waist Side", + d = QmuTranslation::translate("Measurements", "Highbust Side (Armpit) to Waist Side.", "Full measurement description."); InitMeasurement(armpitToWaistSide_M, m, g, d, "E03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_tip_to_waist_side_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Tip to Waist Side (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Shoulder Tip to Waist Side (front)", + d = QmuTranslation::translate("Measurements", "Shoulder Tip to Waist Side (front).", "Full measurement description."); InitMeasurement(shoulderTipToWaistSideF_M, m, g, d, "E04"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_waist_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Waist (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Waist (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Side to Waist (front).", "Full measurement description."); InitMeasurement(neckSideToWaistF_M, m, g, d, "E05"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_waist_bustpoint_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Waist through Bustpoint (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Waist through Bustpoint (front)", + d = QmuTranslation::translate("Measurements", "Neck Side to Waist through Bustpoint (front).", "Full measurement description."); InitMeasurement(neckSideToWaistBustpointF_M, m, g, d, "E06"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_tip_to_waist_side_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Tip to Waist Side (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Shoulder Tip to Waist Side (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Shoulder Tip to Waist Side (back).", + "Full measurement description."); InitMeasurement(shoulderTipToWaistSideB_M, m, g, d, "E07"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_waist_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Waist (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Waist (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Side to Waist (back).", "Full measurement description."); InitMeasurement(neckSideToWaistB_M, m, g, d, "E08"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_back_to_waist_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Waist Back", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Back to Waist Back", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Back to Waist Back.", "Full measurement description."); InitMeasurement(neckBackToWaistB_M, m, g, d, "E09"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_waist_bladepoint_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Waist through Bladepoint (Back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Waist through Bladepoint (Back)", + d = QmuTranslation::translate("Measurements", "Neck Side to Waist through Bladepoint (Back).", "Full measurement description."); InitMeasurement(neckSideToWaistBladepointB_M, m, g, d, "E10"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_front_to_highbust_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Front to Highbust (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Front to Highbust (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Front to Highbust (front).", "Full measurement description."); InitMeasurement(neckFrontToHighbustF_M, m, g, d, "E11"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_front_to_bust_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Front to Bust (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Front to Bust (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Front to Bust (front).", "Full measurement description."); InitMeasurement(neckFrontToBustF_M, m, g, d, "E12"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "highbust_to_waist_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust to Waist (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Highbust to Waist (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Highbust to Waist (front).", "Full measurement description."); InitMeasurement(highbustToWaistF_M, m, g, d, "E13", "(neck_front_to_waist - neck_front_to_highbust)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bust_to_waist_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bust to Waist (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Bust Center down to Waist line", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Bust Center down to Waist line.", "Full measurement description."); InitMeasurement(bustToWaistF_M, m, g, d, "E14"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "lowbust_to_waist_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Lowbust to Waist (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Lowbust to Waist (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Lowbust to Waist (front).", "Full measurement description."); InitMeasurement(lowbustToWaistF_M, m, g, d, "E15"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "rib_to_waist_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Rib to Waist (side)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From lowest rib at side down to waist", + d = QmuTranslation::translate("Measurements", "From lowest rib at side down to waist.", "Full measurement description."); InitMeasurement(ribToWaistSide_M, m, g, d, "E16"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_back_to_highbust_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Highbust (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Back to Highbust (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Back to Highbust (back).", "Full measurement description."); InitMeasurement(neckBackToHighbustB_M, m, g, d, "E17"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_back_to_bust_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Bust (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Back to Bust (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Back to Bust (back).", "Full measurement description."); InitMeasurement(neckBackToBustB_M, m, g, d, "E18"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "highbust_to_waist_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust to Waist (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Highbust to Waist (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Highbust to Waist (back).", "Full measurement description."); InitMeasurement(highbustToWaistB_M, m, g, d, "E19", "(neck_back_to_waist - neck_back_to_highbust)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bust_to_waist_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bust back center to waist line (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Bust back center to waist line (back)", + d = QmuTranslation::translate("Measurements", "Bust back center to waist line (back).", "Full measurement description."); InitMeasurement(bustToWaistB_M, m, g, d, "E20"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "lowbust_to_waist_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Lowbust to Waist (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Lowbust to Waist (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Lowbust to Waist (back).", "Full measurement description."); InitMeasurement(lowbustToWaistB_M, m, g, d, "E21"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_tip_to_armfold_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Tip to Armfold (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Shoulder Tip to Armfold (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Shoulder Tip to Armfold (front).", "Full measurement description."); InitMeasurement(shoulderTipToArmfoldF_M, m, g, d, "E22"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_bust_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Bust (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Bust (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Side to Bust (front).", "Full measurement description."); InitMeasurement(neckSideToBustF_M, m, g, d, "E23"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_highbust_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Highbust (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Highbust (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Side to Highbust (front).", "Full measurement description."); InitMeasurement(neckSideToHighbustF_M, m, g, d, "E24"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_center_to_highbust_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Center to Highbust (front), aimed at Bustpoint", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Shoulder Center to Highbust (front), aimed at Bustpoint", + d = QmuTranslation::translate("Measurements", "Shoulder Center to Highbust (front), aimed at Bustpoint.", "Full measurement description."); InitMeasurement(shoulderCenterToHighbustF_M, m, g, d, "E25"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_tip_to_armfold_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Tip to Armfold (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Shoulder Tip to Armfold (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Shoulder Tip to Armfold (back).", "Full measurement description."); InitMeasurement(shoulderTipToArmfoldB_M, m, g, d, "E26"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_bust_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Bust (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Bust (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Side to Bust (back).", "Full measurement description."); InitMeasurement(neckSideToBustB_M, m, g, d, "E27"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_highbust_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Highbust (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Highbust (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Neck Side to Highbust (back).", "Full measurement description."); InitMeasurement(neckSideToHighbustB_M, m, g, d, "E28"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_center_to_highbust_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Center to Highbust (back), aimed through Bladepoint", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Shoulder Center to Highbust (back), aimed through Bladepoint", + d = QmuTranslation::translate("Measurements", "Shoulder Center to Highbust (back), aimed through Bladepoint.", "Full measurement description."); InitMeasurement(shoulderCenterToHighbustB_M, m, g, d, "E29"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_to_highhip_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist to Highhip (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Waist to Highhip (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Waist to Highhip (front).", "Full measurement description."); InitMeasurement(waistToHighhipF_M, m, g, d, "E30"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_to_hip_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist to Hip (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Waist to Hip (front)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Waist to Hip (front).", "Full measurement description."); InitMeasurement(waistToHipF_M, m, g, d, "E31"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_to_highhip_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist to Highhip (side)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Waist to Highhip (side)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Waist to Highhip (side).", "Full measurement description."); InitMeasurement(waistToHighhipSide_M, m, g, d, "E32"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_to_highhip_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist to Highhip (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Waist to Highhip (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Waist to Highhip (back).", "Full measurement description."); InitMeasurement(waistToHighhipB_M, m, g, d, "E33"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_to_hip_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist to Hip (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Waist to Hip (back)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Waist to Hip (back).", "Full measurement description."); InitMeasurement(waistToHipB_M, m, g, d, "E34"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_to_hip_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist to Hip (side)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Waist to Hip (side)", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Waist to Hip (side).", "Full measurement description."); InitMeasurement(waistToHipSide_M, m, g, d, "E35"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_slope_neck_side_angle", @@ -977,7 +979,7 @@ void VTranslateMeasurements::InitGroupE() m = QmuTranslation::translate("Measurements", "shoulder_slope_neck_side_length", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Slope length from Neck Side", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance between Neck Side and Shoulder Tip", + d = QmuTranslation::translate("Measurements", "Vertical distance between Neck Side and Shoulder Tip.", "Full measurement description."); InitMeasurement(shoulderSlopeNeckSideLength_M, m, g, d, "E37"); //================================================================================================================= @@ -992,7 +994,7 @@ void VTranslateMeasurements::InitGroupE() m = QmuTranslation::translate("Measurements", "shoulder_slope_neck_back_height", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Slope length from Neck Back", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance between Neck Back and Shoulder Tip", + d = QmuTranslation::translate("Measurements", "Vertical distance between Neck Back and Shoulder Tip.", "Full measurement description."); InitMeasurement(shoulderSlopeNeckBackHeight_M, m, g, d, "E39"); //================================================================================================================= @@ -1019,21 +1021,21 @@ void VTranslateMeasurements::InitGroupF() m = QmuTranslation::translate("Measurements", "shoulder_length", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Length", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Length from Neck Side to Shoulder Tip", + d = QmuTranslation::translate("Measurements", "Length from Neck Side to Shoulder Tip.", "Full measurement description."); InitMeasurement(shoulderLength_M, m, g, d, "F01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_width_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Width (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Shoulder tip, curved around front", + d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Shoulder tip, curved around front.", "Full measurement description."); InitMeasurement(shoulderWidthF_M, m, g, d, "F02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "across_chest_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Across Chest (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Armscye to Armscye, at narrowest width across chest", + d = QmuTranslation::translate("Measurements", "From Armscye to Armscye, at narrowest width across chest.", "Full measurement description."); InitMeasurement(acrossChestF_M, m, g, d, "F03"); //================================================================================================================= @@ -1041,27 +1043,27 @@ void VTranslateMeasurements::InitGroupF() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Armfold to Armfold (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Armfold to Armfold, shortest distance between Armfolds, " - "not parallel to floor", "Full measurement description."); + "not parallel to floor.", "Full measurement description."); InitMeasurement(armfoldToArmfoldF_M, m, g, d, "F04"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_width_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Width (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Shoulder Tip, curved around the back", + d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Shoulder Tip, curved around the back.", "Full measurement description."); InitMeasurement(shoulderWidthB_M, m, g, d, "F05"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "across_back_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Across Back (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Armscye to Armscye, at the narrowest width of the back", + d = QmuTranslation::translate("Measurements", "From Armscye to Armscye, at the narrowest width of the back.", "Full measurement description."); InitMeasurement(acrossBackB_M, m, g, d, "F06"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "armfold_to_armfold_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Armfold to Armfold (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Armfold to Armfold, across the back", + d = QmuTranslation::translate("Measurements", "From Armfold to Armfold, across the back.", "Full measurement description."); InitMeasurement(armfoldToArmfoldB_M, m, g, d, "F07"); //================================================================================================================= @@ -1070,14 +1072,14 @@ void VTranslateMeasurements::InitGroupF() g = QmuTranslation::translate("Measurements", "Shoulder Tip to Shoulder Tip, Half (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Half of the Shoulder Width (front) measurement. Calculate as " - "(Shoulder Width (front) / 2)", "Full measurement description."); + "(Shoulder Width (front) / 2).", "Full measurement description."); InitMeasurement(shoulderTipToShoulderTipHalfF_M, m, g, d, "F08", "(shoulder_tip_to_shoulder_tip_f/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "across_chest_half_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Across Chest, Half (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Half of the Across Chest (front) measurement. Calculate as " - "(Across Chest (front) / 2)", "Full measurement description."); + "(Across Chest (front) / 2).", "Full measurement description."); InitMeasurement(acrossChestHalfF_M, m, g, d, "F09", "(across_chest_f/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_tip_to_shoulder_tip_half_b", @@ -1085,27 +1087,27 @@ void VTranslateMeasurements::InitGroupF() g = QmuTranslation::translate("Measurements", "Shoulder Tip to Shoulder Tip, Half (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Half of the Shoulder Width (back) measurement. Calculate as " - "(Shoulder Width (back) / 2)", "Full measurement description."); + "(Shoulder Width (back) / 2).", "Full measurement description."); InitMeasurement(shoulderTipToShoulderTipHalfB_M, m, g, d, "F10", "(shoulder_tip_to_shoulder_tip_b/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "across_back_half_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Across Back, Half (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Half of the Across Back measurement. Calculate as (Across Back / 2)", - "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Half of the Across Back measurement. Calculate as " + "(Across Back / 2).", "Full measurement description."); InitMeasurement(acrossBackHalfB_M, m, g, d, "F11", "(across_back_b/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_front_to_shoulder_tip_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Front to Shoulder Tip (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Front to Shoulder Tip, across the front", + d = QmuTranslation::translate("Measurements", "From Neck Front to Shoulder Tip, across the front.", "Full measurement description."); InitMeasurement(neckFrontToShoulderTipF_M, m, g, d, "F12"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_back_to_shoulder_tip_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Shoulder Tip (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Back to Shoulder tip, across the back", + d = QmuTranslation::translate("Measurements", "From Neck Back to Shoulder tip, across the back.", "Full measurement description."); InitMeasurement(neckBackToShoulderTipB_M, m, g, d, "F13"); //================================================================================================================= @@ -1132,54 +1134,54 @@ void VTranslateMeasurements::InitGroupG() m = QmuTranslation::translate("Measurements", "bustpoint_to_bustpoint", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bustpoint to Bustpoint", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Bustpoint to Bustpoint", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "From Bustpoint to Bustpoint.", "Full measurement description."); InitMeasurement(bustpointToBustpoint_M, m, g, d, "G01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bustpoint_to_neck_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bustpoint to Neck Side", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Side to Bustpoint", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "From Neck Side to Bustpoint.", "Full measurement description."); InitMeasurement(bustpointToNeckSide_M, m, g, d, "G02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bustpoint_to_lowbust", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bustpoint to Lowbust", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Bustpoint straight down to Lowbust level, following curve " - "of bust or chest", "Full measurement description."); + "of bust or chest.", "Full measurement description."); InitMeasurement(bustpointToLowbust_M, m, g, d, "G03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bustpoint_to_waist", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bustpoint to Waist", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Bustpoint to Waist level, forming a straight line " - "(not curving along the body)", "Full measurement description."); + "(not curving along the body).", "Full measurement description."); InitMeasurement(bustpointToWaist_M, m, g, d, "G04"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bustpoint_to_bustpoint_half", "Name in a formula. Don't use math symbols and space in name!!!!"); - g = QmuTranslation::translate("Measurements", "Bustpoint to Waist", "Full measurement name."); + g = QmuTranslation::translate("Measurements", "Bustpoint to Bustpoint, Half", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Half of Bustpoint to Bustpoint measurement. Calculate as " - "(Bustpoint to Bustpoint / 2)", "Full measurement description."); + "(Bustpoint to Bustpoint / 2).", "Full measurement description."); InitMeasurement(bustpointToBustpointHalf_M, m, g, d, "G05", "(bustpoint_to_bustpoint/2)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bustpoint_to_bustpoint_halter", "Name in a formula. Don't use math symbols and space in name!!!!"); - g = QmuTranslation::translate("Measurements", "Bustpoint to Bustpoint, Half", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Bustpoint, around Neck Back, down to Bustpoint", + g = QmuTranslation::translate("Measurements", "Bustpoint to Bustpoint Halter", "Full measurement name."); + d = QmuTranslation::translate("Measurements", "From Bustpoint, around Neck Back, down to Bustpoint.", "Full measurement description."); InitMeasurement(bustpointToBustpointHalter_M, m, g, d, "G06"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bustpoint_to_shoulder_tip", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bustpoint to Shoulder Tip", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Bustpoint to Shoulder tip", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "From Bustpoint to Shoulder tip.", "Full measurement description."); InitMeasurement(bustpointToShoulderTip_M, m, g, d, "G07"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "bustpoint_to_waist_front", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Bustpoint to Waist Front", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Bustpoint to Waist Front, in a straight line, not following " - "the curves of the body", "Full measurement description."); + "the curves of the body.", "Full measurement description."); InitMeasurement(bustpointToWaistFront_M, m, g, d, "G08"); //================================================================================================================= } @@ -1197,81 +1199,81 @@ void VTranslateMeasurements::InitGroupH() m = QmuTranslation::translate("Measurements", "shoulder_tip_to_waist_front", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Tip to Waist Front", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Waist Front", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Waist Front.", "Full measurement description."); InitMeasurement(shoulderTipToWaistFront_M, m, g, d, "H01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_front_to_waist_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Front to Waist Side", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Front to Waist Side, across front", + d = QmuTranslation::translate("Measurements", "From Neck Front to Waist Side, across front.", "Full measurement description."); InitMeasurement(neckFrontToWaistSide_M, m, g, d, "H02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_waist_side_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Waist Side (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Side to Waist Side, across front", + d = QmuTranslation::translate("Measurements", "From Neck Side to Waist Side, across front.", "Full measurement description."); InitMeasurement(neckSideToWaistSideF_M, m, g, d, "H03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_armfold_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Armfold (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Side to Armfold front", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "From Neck Side to Armfold front.", "Full measurement description."); InitMeasurement(neckSideToArmfoldF_M, m, g, d, "H04"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_armpit_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Armpit (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Side to Highbust Side (Armpit), across front", + d = QmuTranslation::translate("Measurements", "From Neck Side to Highbust Side (Armpit), across front.", "Full measurement description."); InitMeasurement(neckSideToArmpitF_M, m, g, d, "H05"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_bust_side_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Bust Side (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Bust Side, across front", + d = QmuTranslation::translate("Measurements", "Neck Side to Bust Side, across front.", "Full measurement description."); InitMeasurement(neckSideToBustSideF_M, m, g, d, "H06"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "shoulder_tip_to_waist_back", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Shoulder Tip to Waist Back", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Waist Back, across back", + d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Waist Back, across back.", "Full measurement description."); InitMeasurement(shoulderTipToWaistBack_M, m, g, d, "H07"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_back_to_waist_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Waist Side", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Back to Waist Side, across back", + d = QmuTranslation::translate("Measurements", "From Neck Back to Waist Side, across back.", "Full measurement description."); InitMeasurement(neckBackToWaistSide_M, m, g, d, "H08"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_waist_side_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Waist Side (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Side to Waist Side, across back", + d = QmuTranslation::translate("Measurements", "From Neck Side to Waist Side, across back.", "Full measurement description."); InitMeasurement(neckSideToWaistSideB_M, m, g, d, "H09"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_armfold_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Armfold (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Side to Armfold back", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "From Neck Side to Armfold back.", "Full measurement description."); InitMeasurement(neckSideToArmfoldB_M, m, g, d, "H10"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_armpit_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Armpit (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Highbust Side (Armpit), across back", + d = QmuTranslation::translate("Measurements", "Neck Side to Highbust Side (Armpit), across back.", "Full measurement description."); InitMeasurement(neckSideToArmpitB_M, m, g, d, "H11"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_side_to_bust_side_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Side to Bust Side (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Neck Side to Bust Side, across back", + d = QmuTranslation::translate("Measurements", "Neck Side to Bust Side, across back.", "Full measurement description."); InitMeasurement(neckSideToBustSideB_M, m, g, d, "H12"); //================================================================================================================= @@ -1298,14 +1300,14 @@ void VTranslateMeasurements::InitGroupI() m = QmuTranslation::translate("Measurements", "arm_shoulder_tip_to_wrist_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Shoulder Tip to Wrist (bent)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Shoulder Tip around Elbow to radial Wrist bone, Arm is bent", + d = QmuTranslation::translate("Measurements", "From Shoulder Tip around Elbow to radial Wrist bone, Arm is bent.", "Full measurement description."); InitMeasurement(armShoulderTipToWristBent_M, m, g, d, "I01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_shoulder_tip_to_elbow_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Shoulder Tip to Elbow (bent)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Elbow Tip, Arm is bent", + d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Elbow Tip, Arm is bent.", "Full measurement description."); InitMeasurement(armShoulderTipToElbowBent_M, m, g, d, "I02"); //================================================================================================================= @@ -1313,27 +1315,27 @@ void VTranslateMeasurements::InitGroupI() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Elbow to Wrist (bent)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Elbow Tip to Wrist, calculate as ( Arm: Shoulder Tip to " - "Wrist (bent) - Arm: Shoulder Tip to Elbow (bent) )", + "Wrist (bent) - Arm: Shoulder Tip to Elbow (bent) ).", "Full measurement description."); InitMeasurement(armElbowToWristBent_M, m, g, d, "I03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_elbow_circ_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Elbow circumference (bent)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Elbow circumference, Arm is bent", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Elbow circumference, Arm is bent.", "Full measurement description."); InitMeasurement(armElbowCircBent_M, m, g, d, "I04"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_shoulder_tip_to_wrist", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Shoulder Tip to Wrist", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Shoulder Tip to radial Wrist bone, Arm is straight", + d = QmuTranslation::translate("Measurements", "From Shoulder Tip to radial Wrist bone, Arm is straight.", "Full measurement description."); InitMeasurement(armShoulderTipToWrist_M, m, g, d, "I05"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_shoulder_tip_to_elbow", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Shoulder Tip to Elbow", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Shoulder tip to Elbow Tip, Arm is straight", + d = QmuTranslation::translate("Measurements", "From Shoulder tip to Elbow Tip, Arm is straight.", "Full measurement description."); InitMeasurement(armShoulderTipToElbow_M, m, g, d, "I06"); //================================================================================================================= @@ -1341,21 +1343,21 @@ void VTranslateMeasurements::InitGroupI() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Elbow to Wrist", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Length from Elbow to Wrist, Arm is straight. Measure as " - "( Arm: Shoulder Tip to Wrist - Arm: Shoulder Tip to Elbow )", + "( Arm: Shoulder Tip to Wrist - Arm: Shoulder Tip to Elbow ).", "Full measurement description."); InitMeasurement(armElbowToWrist_M, m, g, d, "I07"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_armpit_to_wrist", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Armpit to Wrist", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Armpit to ulna Wrist bone, Arm is straight", + d = QmuTranslation::translate("Measurements", "From Armpit to ulna Wrist bone, Arm is straight.", "Full measurement description."); InitMeasurement(armArmpitToWrist_M, m, g, d, "I08"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_armpit_to_elbow", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Armpit to Elbow", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Armpit to Elbow ulna bone, Arm is straight", + d = QmuTranslation::translate("Measurements", "From Armpit to Elbow ulna bone, Arm is straight.", "Full measurement description."); InitMeasurement(armArmpitToElbow_M, m, g, d, "I09"); //================================================================================================================= @@ -1363,65 +1365,67 @@ void VTranslateMeasurements::InitGroupI() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Elbow to Wrist (inside)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Elbow to Wrist ulna bone, calculate as " - "( Arm: Armpit to Wrist - Arm: Armpit to Elbow )", "Full measurement description."); + "( Arm: Armpit to Wrist - Arm: Armpit to Elbow ).", "Full measurement description."); InitMeasurement(armElbowToWristInside_M, m, g, d, "I10"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_upper_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Upper Arm circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Arm circumference at Armpit level", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Arm circumference at Armpit level.", + "Full measurement description."); InitMeasurement(armUpperCirc_M, m, g, d, "I11"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_above_elbow_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Above Elbow circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Arm circumference at Bicep level", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Arm circumference at Bicep level.", "Full measurement description."); InitMeasurement(armAboveElbowCirc_M, m, g, d, "I12"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_elbow_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Elbow circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Elbow circumference, Arm is straight", + d = QmuTranslation::translate("Measurements", "Elbow circumference, Arm is straight.", "Full measurement description."); InitMeasurement(armElbowCirc_M, m, g, d, "I13"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_lower_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Lower Arm circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Arm circumference where lower arm is widest", + d = QmuTranslation::translate("Measurements", "Arm circumference where lower arm is widest.", "Full measurement description."); InitMeasurement(armLowerCirc_M, m, g, d, "I14"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_wrist_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Wrist circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Wrist circumference", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Wrist circumference.", "Full measurement description."); InitMeasurement(armWristCirc_M, m, g, d, "I15"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_shoulder_tip_to_armfold_line", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Shoulder Tip to Armfold level", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Armpit level", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "From Shoulder Tip to Armpit level.", + "Full measurement description."); InitMeasurement(armShoulderTipToArmfoldLine_M, m, g, d, "I16"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "armscye_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Armscye circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Measure Armscye circumference through Shoulder Tip and Armpit, " - "Arm is hanging straight at side", "Full measurement description."); + "Arm is hanging straight at side.", "Full measurement description."); InitMeasurement(armscyeCirc_M, m, g, d, "I17"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "armscye_length", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Armscye length", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from Shoulder Tip to Armpit", + d = QmuTranslation::translate("Measurements", "Vertical distance from Shoulder Tip to Armpit.", "Full measurement description."); InitMeasurement(armscyeLength_M, m, g, d, "I18"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "armscye_width", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Armscye width", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Horizontal distance from Armscye front to Armscye back", + d = QmuTranslation::translate("Measurements", "Horizontal distance from Armscye front to Armscye back.", "Full measurement description."); InitMeasurement(armscyeWidth_M, m, g, d, "I19"); //================================================================================================================= @@ -1429,7 +1433,7 @@ void VTranslateMeasurements::InitGroupI() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Neck Side to Middle Finger Tip", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Neck Side to end of middle finger, calculate as " - "( Shoulder Length + Arm: Shoulder Tip to Wrist + Hand length )", + "( Shoulder Length + Arm: Shoulder Tip to Wrist + Hand length ).", "Full measurement description."); InitMeasurement(armNeckSideToFingerTip_M, m, g, d, "I20", "(shoulder_length + arm_shoulder_tip_to_wrist + hand_length)"); @@ -1438,7 +1442,7 @@ void VTranslateMeasurements::InitGroupI() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Neck Side to Wrist", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Neck Side to Wrist, calculate as ( Shoulder Length + " - "Arm: Shoulder Tip to Wrist )", "Full measurement description."); + "Arm: Shoulder Tip to Wrist ).", "Full measurement description."); InitMeasurement(armNeckSideToWrist_M, m, g, d, "I21"); //================================================================================================================= } @@ -1471,41 +1475,41 @@ void VTranslateMeasurements::InitGroupJ() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Waist Side to Knee", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Waist side to Knee, calculate as (Leg: Waist Side to Floor - " - "Height: Knee)", "Full measurement description."); + "Height: Knee).", "Full measurement description."); InitMeasurement(legWaistSideToKnee_M, m, g, d, "J03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_thigh_upper_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Thigh Upper circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Measure thigh circumference at the fullest part of the upper " - "thigh, near the crotch", "Full measurement description."); + "thigh, near the crotch.", "Full measurement description."); InitMeasurement(legThighUpperCirc_M, m, g, d, "J04"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_thigh_mid_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Thigh Middle circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Thigh circumference roughly halfway between crotch and knee", + d = QmuTranslation::translate("Measurements", "Thigh circumference roughly halfway between crotch and knee.", "Full measurement description."); InitMeasurement(legThighMidCirc_M, m, g, d, "J05"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_knee_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Knee circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Knee circumference, Leg is straight", + d = QmuTranslation::translate("Measurements", "Knee circumference, Leg is straight.", "Full measurement description."); InitMeasurement(legKneeCirc_M, m, g, d, "J06"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_knee_small_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Knee Small circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Leg circumference just below the knee", + d = QmuTranslation::translate("Measurements", "Leg circumference just below the knee.", "Full measurement description."); InitMeasurement(legKneeSmallCirc_M, m, g, d, "J07"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_calf_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Calf circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Leg circumference at the widest part of Calf", + d = QmuTranslation::translate("Measurements", "Leg circumference at the widest part of Calf.", "Full measurement description."); InitMeasurement(legCalfCirc_M, m, g, d, "J08"); //================================================================================================================= @@ -1513,41 +1517,41 @@ void VTranslateMeasurements::InitGroupJ() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Ankle High circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Ankle circumference where the indentation at the back of the " - "ankle is the deepest", "Full measurement description."); + "ankle is the deepest.", "Full measurement description."); InitMeasurement(legAnkleHighCirc_M, m, g, d, "J09"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_ankle_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Ankle circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Ankle circumference where front of Leg meets the top of the Foot", + d = QmuTranslation::translate("Measurements", "Ankle circumference where front of Leg meets the top of the Foot.", "Full measurement description."); InitMeasurement(legAnkleCirc_M, m, g, d, "J10"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_knee_circ_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Knee circumference (bent)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Knee circumference, Leg is bent", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Knee circumference, Leg is bent.", "Full measurement description."); InitMeasurement(legKneeCircBent_M, m, g, d, "J11"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_ankle_diag_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Ankle diagonal circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Ankle circumference taken diagonally from corner of Heel through " - "point where Leg meets Foot", "Full measurement description."); + "point where Leg meets Foot.", "Full measurement description."); InitMeasurement(legAnkleDiagCirc_M, m, g, d, "J12"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_crotch_to_ankle", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Crotch to Ankle", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Crotch to Ankle level, calculate as ( Leg: Crotch to " - "Floor - Height: Ankle )", "Full measurement description."); + "Floor - Height: Ankle ).", "Full measurement description."); InitMeasurement(legCrotchToAnkle_M, m, g, d, "J13", "(leg_crotch_to_floor - height_ankle)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "leg_waist_side_to_ankle", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Leg: Waist Side to Ankle", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Waist Side to Ankle level, calculate as (Leg: Waist Side " - "to Floor - Height: Ankle)", "Full measurement description."); + "to Floor - Height: Ankle).", "Full measurement description."); InitMeasurement(legWaistSideToAnkle_M, m, g, d, "J14", "(leg_waist_side_to_floor - height_ankle)"); //================================================================================================================= } @@ -1566,7 +1570,7 @@ void VTranslateMeasurements::InitGroupK() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Crotch length", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Waist Front then between Legs then to Waist Back. Apply tape " - "across gap between buttocks at Hip level. ", "Full measurement description."); + "across gap between buttocks at Hip level.", "Full measurement description."); InitMeasurement(crotchLength_M, m, g, d, "K01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "crotch_length_b", @@ -1581,14 +1585,14 @@ void VTranslateMeasurements::InitGroupK() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Crotch length (front)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Waist front to beginning of vagina or end of testicles, " - "calculate from ( Crotch Length - Crotch Length (back) )", + "calculate from ( Crotch Length - Crotch Length (back) ).", "Full measurement description."); InitMeasurement(crotchLengthF_M, m, g, d, "K03", "(crotch_length - crotch_length_b)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "rise_length_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Rise length (side)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Waist Side down to hard surface in seated position", + d = QmuTranslation::translate("Measurements", "From Waist Side down to hard surface in seated position.", "Full measurement description."); InitMeasurement(riseLengthSide_M, m, g, d, "K04"); //================================================================================================================= @@ -1603,14 +1607,14 @@ void VTranslateMeasurements::InitGroupK() m = QmuTranslation::translate("Measurements", "rise_length_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Rise length (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from Waist Back to Crotch level", + d = QmuTranslation::translate("Measurements", "Vertical distance from Waist Back to Crotch level.", "Full measurement description."); InitMeasurement(riseLengthB_M, m, g, d, "K06"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "rise_length_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Rise length (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical Distance from Waist Front to Crotch level", + d = QmuTranslation::translate("Measurements", "Vertical Distance from Waist Front to Crotch level.", "Full measurement description."); InitMeasurement(riseLengthF_M, m, g, d, "K07"); //================================================================================================================= @@ -1629,27 +1633,27 @@ void VTranslateMeasurements::InitGroupL() m = QmuTranslation::translate("Measurements", "hand_palm_length", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hand: Palm length", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Wrist line to base of Middle Finger", + d = QmuTranslation::translate("Measurements", "From Wrist line to base of Middle Finger.", "Full measurement description."); InitMeasurement(handPalmLength_M, m, g, d, "L01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "hand_length", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hand: length", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Wrist line to end of Middle Finger", + d = QmuTranslation::translate("Measurements", "From Wrist line to end of Middle Finger.", "Full measurement description."); InitMeasurement(handLength_M, m, g, d, "L02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "hand_palm_width", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hand: Palm width", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Width where Palm is widest", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Width where Palm is widest.", "Full measurement description."); InitMeasurement(handPalmWidth_M, m, g, d, "L03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "hand_palm_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Hand: Palm circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Circumference where Palm is widest", + d = QmuTranslation::translate("Measurements", "Circumference where Palm is widest.", "Full measurement description."); InitMeasurement(handPalmCirc_M, m, g, d, "L04"); //================================================================================================================= @@ -1675,27 +1679,27 @@ void VTranslateMeasurements::InitGroupM() m = QmuTranslation::translate("Measurements", "foot_width", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Foot: width", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Measure at widest part of foot", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Measure at widest part of foot.", "Full measurement description."); InitMeasurement(footWidth_M, m, g, d, "M01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "foot_length", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Foot: length", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Measure from back of heel to end of longest toe", + d = QmuTranslation::translate("Measurements", "Measure from back of heel to end of longest toe.", "Full measurement description."); InitMeasurement(footLength_M, m, g, d, "M02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "foot_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Foot: circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Measure circumference around widest part of foot", + d = QmuTranslation::translate("Measurements", "Measure circumference around widest part of foot.", "Full measurement description."); InitMeasurement(footCirc_M, m, g, d, "M03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "foot_instep_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Foot: Instep circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Measure circumference at tallest part of instep", + d = QmuTranslation::translate("Measurements", "Measure circumference at tallest part of instep.", "Full measurement description."); InitMeasurement(footInstepCirc_M, m, g, d, "M04"); //================================================================================================================= @@ -1714,21 +1718,21 @@ void VTranslateMeasurements::InitGroupN() m = QmuTranslation::translate("Measurements", "head_circ", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Head: circumference", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Measure circumference at largest level of head", + d = QmuTranslation::translate("Measurements", "Measure circumference at largest level of head.", "Full measurement description."); InitMeasurement(headCirc_M, m, g, d, "N01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "head_length", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Head: length", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Vertical distance from Head Crown to bottom of jaw ", + d = QmuTranslation::translate("Measurements", "Vertical distance from Head Crown to bottom of jaw.", "Full measurement description."); InitMeasurement(headLength_M, m, g, d, "N02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "head_depth", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Head: depth", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Horizontal distance from front of forehead to back of head", + d = QmuTranslation::translate("Measurements", "Horizontal distance from front of forehead to back of head.", "Full measurement description."); InitMeasurement(headDepth_M, m, g, d, "N03"); //================================================================================================================= @@ -1736,7 +1740,7 @@ void VTranslateMeasurements::InitGroupN() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Head: width", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Horizontal distance from Head Side to Head Side, where Head is " - "widest", "Full measurement description."); + "widest.", "Full measurement description."); InitMeasurement(headWidth_M, m, g, d, "N04"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "head_crown_to_neck_back", @@ -1744,7 +1748,7 @@ void VTranslateMeasurements::InitGroupN() g = QmuTranslation::translate("Measurements", "Head: Crown to Neck Back, vertical distance", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from Head Crown to Neck Back. Calculate as " - "(Height - Height: Neck Back)", "Full measurement description."); + "(Height - Height: Neck Back).", "Full measurement description."); InitMeasurement(headCrownToNeckBack_M, m, g, d, "N05", "(height - height_neck_back)"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "head_chin_to_neck_back", @@ -1752,7 +1756,8 @@ void VTranslateMeasurements::InitGroupN() g = QmuTranslation::translate("Measurements", "Head: Chin to Neck Back, vertical distance", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Vertical distance from bottom of jaw to Neck Back, calculate as " - "( Height - Height: Neck Back - Head: Length )", "Full measurement description."); + "( Height - Height: Neck Back - Head: Length ).", + "Full measurement description."); InitMeasurement(headChinToNeckBack_M, m, g, d, "N06", "(height - height_neck_back - head_length)"); //================================================================================================================= } @@ -1770,14 +1775,14 @@ void VTranslateMeasurements::InitGroupO() m = QmuTranslation::translate("Measurements", "neck_back_to_waist_front", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Waist Front", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Back around Neck Side down to Waist Front", + d = QmuTranslation::translate("Measurements", "From Neck Back around Neck Side down to Waist Front.", "Full measurement description."); InitMeasurement(neckBackToWaistFront_M, m, g, d, "O01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_to_waist_halter", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist to Waist Halter", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Waist level around Neck Back to Waist level", + d = QmuTranslation::translate("Measurements", "From Waist level around Neck Back to Waist level.", "Full measurement description."); InitMeasurement(waistToWaistHalter_M, m, g, d, "O02"); //================================================================================================================= @@ -1785,14 +1790,14 @@ void VTranslateMeasurements::InitGroupO() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Natural Waist circumference", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Torso circumference at men's natural side Abdominal Obliques " - "indentation, if Oblique indentation isn't found then just below the Navel level. ", + "indentation, if Oblique indentation isn't found then just below the Navel level.", "Full measurement description."); InitMeasurement(waistNaturalCirc_M, m, g, d, "O03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_natural_arc_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Natural Waist arc (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Side to Side at the Natural Waist level, across the front", + d = QmuTranslation::translate("Measurements", "From Side to Side at the Natural Waist level, across the front.", "Full measurement description."); InitMeasurement(waistNaturalArcF_M, m, g, d, "O04"); //================================================================================================================= @@ -1800,21 +1805,21 @@ void VTranslateMeasurements::InitGroupO() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Natural Waist arc (back)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Side to Side at Natural Waist level, across the back. " - "Calculate as ( Natural Waist circumference - Natural Waist arc (front) )", + "Calculate as ( Natural Waist circumference - Natural Waist arc (front) ).", "Full measurement description."); InitMeasurement(waistNaturalArcB_M, m, g, d, "O05"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_to_natural_waist_f", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist to Natural Waist (front)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Length from Waist Front to Natural Waist Front", + d = QmuTranslation::translate("Measurements", "Length from Waist Front to Natural Waist Front.", "Full measurement description."); InitMeasurement(waistToNaturalWaistF_M, m, g, d, "O06"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "waist_to_natural_waist_b", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Waist to Natural Waist (back)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Length from Waist Back to Natural Waist Back", + d = QmuTranslation::translate("Measurements", "Length from Waist Back to Natural Waist Back.", "Full measurement description."); InitMeasurement(waistToNaturalWaistB_M, m, g, d, "O07"); //================================================================================================================= @@ -1822,49 +1827,49 @@ void VTranslateMeasurements::InitGroupO() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Neck Back to Elbow (bent)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Bend Arm with Elbow out, hand in front. Measure from Neck Back to " - "Elbow Tip", "Full measurement description."); + "Elbow Tip.", "Full measurement description."); InitMeasurement(armNeckBackToElbowBent_M, m, g, d, "O08"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_neck_back_to_wrist_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Neck Back to Wrist (bent)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Bend Arm with Elbow out, hand in front. Measure from Neck Back to " - "Elbow Tip to Wrist bone", "Full measurement description."); + "Elbow Tip to Wrist bone.", "Full measurement description."); InitMeasurement(armNeckBackToWristBent_M, m, g, d, "O09"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_neck_side_to_elbow_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Neck Side to Elbow (bent)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Bend Arm with Elbow out, hand in front. Measure from Neck Side to " - "Elbow Tip", "Full measurement description."); + "Elbow Tip.", "Full measurement description."); InitMeasurement(armNeckSideToElbowBent_M, m, g, d, "O10"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_neck_side_to_wrist_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Neck Side to Wrist (bent)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Bend Arm with Elbow out, hand in front. Measure from Neck Side to " - "Elbow Tip to Wrist bone", "Full measurement description."); + "Elbow Tip to Wrist bone.", "Full measurement description."); InitMeasurement(armNeckSideToWristBent_M, m, g, d, "O11"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_across_back_center_to_elbow_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Across Back Center to Elbow (bent)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Bend Arm with Elbow out, hand in front. Measure from Middle of " - "Back to Elbow Tip ", "Full measurement description."); + "Back to Elbow Tip.", "Full measurement description."); InitMeasurement(armAcrossBackCenterToElbowBent_M, m, g, d, "O12"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_across_back_center_to_wrist_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Across Back Center to Wrist (bent)", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Bend Arm with Elbow out, hand in front. Measure from Middle of " - "Back to Elbow Tip to Wrist bone", "Full measurement description."); + "Back to Elbow Tip to Wrist bone.", "Full measurement description."); InitMeasurement(armAcrossBackCenterToWristBent_M, m, g, d, "O13"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "arm_armscye_back_center_to_wrist_bent", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Arm: Armscye Back Center to Wrist (bent)", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Bend Arm with Elbow out, hand in front. Measure from Armscye" - "Back to Elbow Tip ", "Full measurement description."); + d = QmuTranslation::translate("Measurements", "Bend Arm with Elbow out, hand in front. Measure from Armscye " + "Back to Elbow Tip.", "Full measurement description."); InitMeasurement(armArmscyeBackCenterToWristBent_M, m, g, d, "O14"); //================================================================================================================= } @@ -1884,34 +1889,34 @@ void VTranslateMeasurements::InitGroupP() g = QmuTranslation::translate("Measurements", "Armfold Front right to Armfold Front left, curved through Bust " "Front", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Measure in a curve from Armfold Front right to Bust Front to " - "Armfold Front left", "Full measurement description."); + "Armfold Front left.", "Full measurement description."); InitMeasurement(armfoldToArmfoldBust_M, m, g, d, "P01"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "armfold_to_bust_front", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Armfold to Bust Front", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "Measure from Armfold Front to Bust Front", + d = QmuTranslation::translate("Measurements", "Measure from Armfold Front to Bust Front.", "Full measurement description."); InitMeasurement(armfoldToBustFront_M, m, g, d, "P02"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_back_to_bust_front", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Bust Front", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Back around Neck Side to Bust Front", + d = QmuTranslation::translate("Measurements", "From Neck Back around Neck Side to Bust Front.", "Full measurement description."); InitMeasurement(neckBackToBustFront_M, m, g, d, "P03"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_back_to_armfold_front", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Armfold Front", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Back around Neck Side to Armfold Front", + d = QmuTranslation::translate("Measurements", "From Neck Back around Neck Side to Armfold Front.", "Full measurement description."); InitMeasurement(neckBackToArmfoldFront_M, m, g, d, "P04"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_back_to_armfold_front_to_waist_side", "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Armfold Front to Waist Side", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Neck Back around Neck Side down front to Waist Side", + d = QmuTranslation::translate("Measurements", "From Neck Back around Neck Side down front to Waist Side.", "Full measurement description."); InitMeasurement(neckBackToArmfoldFrontToWaistSide_M, m, g, d, "P05"); //================================================================================================================= @@ -1919,7 +1924,7 @@ void VTranslateMeasurements::InitGroupP() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust Back over Shoulder to Armfold Front", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Highbust Back over Shoulder to Armfold Front", + d = QmuTranslation::translate("Measurements", "From Highbust Back over Shoulder to Armfold Front.", "Full measurement description."); InitMeasurement(highbustBackOverShoulderToArmfoldFront_M, m, g, d, "P06"); //================================================================================================================= @@ -1927,7 +1932,7 @@ void VTranslateMeasurements::InitGroupP() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Highbust Back over Shoulder to Waist Front", "Full measurement name."); - d = QmuTranslation::translate("Measurements", "From Highbust Back over Shoulder to Waist Front", + d = QmuTranslation::translate("Measurements", "From Highbust Back over Shoulder to Waist Front.", "Full measurement description."); InitMeasurement(highbustBackOverShoulderToWaistFront_M, m, g, d, "P07"); //================================================================================================================= @@ -1935,7 +1940,7 @@ void VTranslateMeasurements::InitGroupP() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Neck Back to Armfold Front to Neck Back", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Neck Back over Shoulder to Armfold Front, then to Armfold " - "Back and return to Neck Back", "Full measurement description."); + "Back and return to Neck Back.", "Full measurement description."); InitMeasurement(neckBackToArmfoldFrontToNeckBack_M, m, g, d, "P08"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "across_back_center_to_armfold_front_to_across_back_center", @@ -1943,7 +1948,7 @@ void VTranslateMeasurements::InitGroupP() g = QmuTranslation::translate("Measurements", "Across Back Center to Armfold Front to Across Back Center", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Middle of Back over Shoulder to Armfold Front, to Armfold " - "Back and return to Middle of Back", "Full measurement description."); + "Back and return to Middle of Back.", "Full measurement description."); InitMeasurement(acrossBackCenterToArmfoldFrontToAcrossBackCenter_M, m, g, d, "P09"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "neck_back_to_armfold_front_to_highbust_back", @@ -1951,7 +1956,7 @@ void VTranslateMeasurements::InitGroupP() g = QmuTranslation::translate("Measurements", "Neck Back to Armfold Front to Highbust Back", "Full measurement name."); d = QmuTranslation::translate("Measurements", "From Neck Back over shoulder to Armfold Front, to Armfold Back " - "to Highbust Back", "Full measurement description."); + "to Highbust Back.", "Full measurement description."); InitMeasurement(neckBackToArmfoldFrontToHighbustBack_M, m, g, d, "P10"); //================================================================================================================= m = QmuTranslation::translate("Measurements", "highbust_b_over_shoulder_to_highbust_f", @@ -1959,7 +1964,7 @@ void VTranslateMeasurements::InitGroupP() g = QmuTranslation::translate("Measurements", "Highbust Back over Shoulder to Highbust Front", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Front aims at Bustpoint and back crosses overBladepoint. " - "Calculate as (Mid-Shoulder to Highbust (front) + Mid-Shoulder to Highbust (back))", + "Calculate as (Mid-Shoulder to Highbust (front) + Mid-Shoulder to Highbust (back)).", "Full measurement description."); InitMeasurement(highbustBOverShoulderToHighbustF_M, m, g, d, "P11", "(mid_shoulder_to_highbust_f + mid_shoulder_to_highbust_b)"); @@ -1968,7 +1973,7 @@ void VTranslateMeasurements::InitGroupP() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Armscye Arc through Shoulder Tip", "Full measurement name."); d = QmuTranslation::translate("Measurements", "Front aims at Bustpoint and back crosses overBladepoint. " - "Calculate as (Mid-Shoulder to Highbust (front) + Mid-Shoulder to Highbust (back))", + "Calculate as (Mid-Shoulder to Highbust (front) + Mid-Shoulder to Highbust (back)).", "Full measurement description."); InitMeasurement(armscyeArc_M, m, g, d, "P12"); //================================================================================================================= @@ -1988,7 +1993,7 @@ void VTranslateMeasurements::InitGroupQ() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Dart Width > Shoulder", "Full measurement name."); d = QmuTranslation::translate("Measurements", "This information is pulled from pattern charts in some " - "patternmaking systems, e.g. Winifred P. Aldrich's \"Metric Pattern Cutting\"", + "patternmaking systems, e.g. Winifred P. Aldrich's \"Metric Pattern Cutting\".", "Full measurement description."); InitMeasurement(dartWidthShoulder_M, m, g, d, "Q01"); //================================================================================================================= @@ -1996,7 +2001,7 @@ void VTranslateMeasurements::InitGroupQ() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Dart Width > Bust", "Full measurement name."); d = QmuTranslation::translate("Measurements", "This information is pulled from pattern charts in some " - "patternmaking systems, e.g. Winifred P. Aldrich's \"Metric Pattern Cutting\"", + "patternmaking systems, e.g. Winifred P. Aldrich's \"Metric Pattern Cutting\".", "Full measurement description."); InitMeasurement(dartWidthBust_M, m, g, d, "Q02"); //================================================================================================================= @@ -2004,7 +2009,7 @@ void VTranslateMeasurements::InitGroupQ() "Name in a formula. Don't use math symbols and space in name!!!!"); g = QmuTranslation::translate("Measurements", "Dart Width > Waist", "Full measurement name."); d = QmuTranslation::translate("Measurements", "This information is pulled from pattern charts in some " - "patternmaking systems, e.g. Winifred P. Aldrich's \"Metric Pattern Cutting\"", + "patternmaking systems, e.g. Winifred P. Aldrich's \"Metric Pattern Cutting\".", "Full measurement description."); InitMeasurement(dartWidthWaist_M, m, g, d, "Q03"); //=================================================================================================================