diff --git a/share/translations/valentina.ts b/share/translations/valentina.ts index e7dcb4d55..3c9817207 100644 --- a/share/translations/valentina.ts +++ b/share/translations/valentina.ts @@ -661,6 +661,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -5080,6 +5112,10 @@ Apply settings anyway? Browse… + + cm + cm + DialogSaveLayout @@ -5747,6 +5783,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5882,6 +5926,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8309,6 +8361,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10440,7 +10500,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - Cannot use pageformat and page explicit size/units together. + Cannot use pageformat and page explicit size/units together. Page height, width, units must be used all 3 at once. @@ -10540,19 +10600,19 @@ Do you want to save your changes? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Shift length must be used together with shift units. @@ -10584,27 +10644,27 @@ Do you want to save your changes? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. + Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. + Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10652,7 +10712,7 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - Number corresponding to page template (default = 0, export mode): + Number corresponding to page template (default = 0, export mode): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10714,6 +10774,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -12088,6 +12220,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_cs_CZ.ts b/share/translations/valentina_cs_CZ.ts index 9ab5f8d22..e3c9dca6f 100644 --- a/share/translations/valentina_cs_CZ.ts +++ b/share/translations/valentina_cs_CZ.ts @@ -544,6 +544,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -651,6 +659,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -821,6 +837,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -852,6 +876,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -4476,14 +4508,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -4983,6 +5015,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5110,6 +5150,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -7248,6 +7296,14 @@ Chcete uložit své změny? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QCommandLineParser @@ -9082,10 +9138,6 @@ Do you want to save your changes? Grouping type - - Cannot use pageformat and page explicit size/units together. - - Page height, width, units must be used all 3 at once. @@ -9158,6 +9210,22 @@ Do you want to save your changes? Pattern file. Soubor se střihem. + + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + Gap width must be used together with shift units. @@ -9182,30 +9250,6 @@ Do you want to save your changes? The path to output destination folder. By default the directory at which the application was started. - - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - - - - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - - - - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -9246,10 +9290,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -9310,6 +9350,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -10550,6 +10662,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_de_DE.ts b/share/translations/valentina_de_DE.ts index a4cdd4421..e547ef187 100644 --- a/share/translations/valentina_de_DE.ts +++ b/share/translations/valentina_de_DE.ts @@ -657,6 +657,14 @@ Pen style: Zeichenstil: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -764,6 +772,14 @@ Pen style: Zeichenstil: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -938,6 +954,14 @@ Pen Style: Zeichenstil: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -973,6 +997,14 @@ Pen style: Zeichenstil: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -4979,14 +5011,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -5502,6 +5534,14 @@ Apply settings anyway? Pen style: Zeichenstil: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5637,6 +5677,14 @@ Apply settings anyway? Pen style: Zeichenstil: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8000,6 +8048,14 @@ Sollen die Änderungen gespeichert werden? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10041,7 +10097,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - Seitenformat und explizite Größe/Einheiten der Seite können nicht zusammen verwendet werden. + Seitenformat und explizite Größe/Einheiten der Seite können nicht zusammen verwendet werden. Page height, width, units must be used all 3 at once. @@ -10141,19 +10197,19 @@ Do you want to save your changes? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Linker Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. + Linker Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Rechter Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. + Rechter Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Oberer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. + Oberer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Unterer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. + Unterer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Shift length must be used together with shift units. @@ -10185,27 +10241,27 @@ Do you want to save your changes? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Einheiten für die Seitenhöhe/-breite (kann nicht mit "%1", Exportmodus, benutzt werden). Gültige Werte: %2. + Einheiten für die Seitenhöhe/-breite (kann nicht mit "%1", Exportmodus, benutzt werden). Gültige Werte: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Ignorieren der Seitenränder zum Druck (Export-Modus). Deaktiviert Werte-Schlüssel: "%1", "%2", "%3", "%4". Setzen Sie alle Seitenränder auf 0. + Ignorieren der Seitenränder zum Druck (Export-Modus). Deaktiviert Werte-Schlüssel: "%1", "%2", "%3", "%4". Setzen Sie alle Seitenränder auf 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Linker Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Der Wert wird ignoriert, falls "%1" verwendet wird. + Linker Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Der Wert wird ignoriert, falls "%1" verwendet wird. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Rechter Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Der Wert wird ignoriert, falls "%1" verwendet wird. + Rechter Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Der Wert wird ignoriert, falls "%1" verwendet wird. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Oberer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Der Wert wird ignoriert, falls "%1" verwendet wird. + Oberer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Der Wert wird ignoriert, falls "%1" verwendet wird. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Unterer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Der Wert wird ignoriert, falls "%1" verwendet wird. + Unterer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. Der Wert wird ignoriert, falls "%1" verwendet wird. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10251,10 +10307,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10315,6 +10367,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11613,6 +11737,10 @@ Do you want to save your changes? Pen style: Zeichenstil: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_el_GR.ts b/share/translations/valentina_el_GR.ts index de6d96764..938fdb1f9 100644 --- a/share/translations/valentina_el_GR.ts +++ b/share/translations/valentina_el_GR.ts @@ -649,6 +649,14 @@ Pen style: Στυλ μαρκαδόρου: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -756,6 +764,14 @@ Pen style: Στυλ μαρκαδόρου: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -926,6 +942,14 @@ Pen Style: Στυλ μαρκαδόρου: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -957,6 +981,14 @@ Pen style: Στυλ μαρκαδόρου: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -4977,14 +5009,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + εκ + DialogSaveLayout @@ -5496,6 +5528,14 @@ Apply settings anyway? Pen style: Στυλ μαρκαδόρου: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5631,6 +5671,14 @@ Apply settings anyway? Pen style: Στυλ μαρκαδόρου: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -7958,6 +8006,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QCommandLineParser @@ -9904,10 +9960,6 @@ Do you want to save your changes? Grouping type Τύπος ομαδοποίησης - - Cannot use pageformat and page explicit size/units together. - - Page height, width, units must be used all 3 at once. @@ -9984,6 +10036,22 @@ Do you want to save your changes? Pattern file. Αρχείο πατρόν. + + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + Gap width must be used together with shift units. @@ -10008,30 +10076,6 @@ Do you want to save your changes? The path to output destination folder. By default the directory at which the application was started. - - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - - - - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - - - - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10072,10 +10116,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10136,6 +10176,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11453,6 +11565,10 @@ Do you want to save your changes? Pen style: Στυλ μαρκαδόρου: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_en_CA.ts b/share/translations/valentina_en_CA.ts index 3d5d56f87..5675c2f93 100644 --- a/share/translations/valentina_en_CA.ts +++ b/share/translations/valentina_en_CA.ts @@ -661,6 +661,14 @@ Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -5060,14 +5092,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -5583,6 +5615,14 @@ Apply settings anyway? Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5718,6 +5758,14 @@ Apply settings anyway? Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8113,6 +8161,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10189,7 +10245,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - Cannot use pageformat and page explicit size/units together. + Cannot use pageformat and page explicit size/units together. Page height, width, units must be used all 3 at once. @@ -10289,19 +10345,19 @@ Do you want to save your changes? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Shift length must be used together with shift units. @@ -10333,27 +10389,27 @@ Do you want to save your changes? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. + Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. + Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10401,7 +10457,7 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - Number corresponding to page template (default = 0, export mode): + Number corresponding to page template (default = 0, export mode): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10463,6 +10519,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11830,6 +11958,10 @@ Do you want to save your changes? Pen style: Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_en_IN.ts b/share/translations/valentina_en_IN.ts index 91cc63efa..902fe6c19 100644 --- a/share/translations/valentina_en_IN.ts +++ b/share/translations/valentina_en_IN.ts @@ -661,6 +661,14 @@ Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -5060,14 +5092,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -5583,6 +5615,14 @@ Apply settings anyway? Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5718,6 +5758,14 @@ Apply settings anyway? Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8113,6 +8161,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10189,7 +10245,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - Cannot use pageformat and page explicit size/units together. + Cannot use pageformat and page explicit size/units together. Page height, width, units must be used all 3 at once. @@ -10289,19 +10345,19 @@ Do you want to save your changes? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Shift length must be used together with shift units. @@ -10333,27 +10389,27 @@ Do you want to save your changes? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. + Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. + Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10401,7 +10457,7 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - Number corresponding to page template (default = 0, export mode): + Number corresponding to page template (default = 0, export mode): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10463,6 +10519,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11830,6 +11958,10 @@ Do you want to save your changes? Pen style: Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_en_US.ts b/share/translations/valentina_en_US.ts index 2b002533e..9e632272f 100644 --- a/share/translations/valentina_en_US.ts +++ b/share/translations/valentina_en_US.ts @@ -661,6 +661,14 @@ Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -5060,14 +5092,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -5583,6 +5615,14 @@ Apply settings anyway? Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5718,6 +5758,14 @@ Apply settings anyway? Pen style: Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8113,6 +8161,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10189,7 +10245,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - Cannot use pageformat and page explicit size/units together. + Cannot use pageformat and page explicit size/units together. Page height, width, units must be used all 3 at once. @@ -10289,19 +10345,19 @@ Do you want to save your changes? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Shift length must be used together with shift units. @@ -10333,27 +10389,27 @@ Do you want to save your changes? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. + Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. + Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10401,7 +10457,7 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - Number corresponding to page template (default = 0, export mode): + Number corresponding to page template (default = 0, export mode): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10463,6 +10519,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11830,6 +11958,10 @@ Do you want to save your changes? Pen style: Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_es_ES.ts b/share/translations/valentina_es_ES.ts index 450f3128f..621bd2ab4 100644 --- a/share/translations/valentina_es_ES.ts +++ b/share/translations/valentina_es_ES.ts @@ -661,6 +661,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -5060,14 +5092,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -5583,6 +5615,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5718,6 +5758,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8113,6 +8161,14 @@ Quiere guardar los cambios? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10188,7 +10244,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - No se puede usar pageformat y tamaño/unidades de pagina explícitos en conjunto. + No se puede usar pageformat y tamaño/unidades de pagina explícitos en conjunto. Page height, width, units must be used all 3 at once. @@ -10288,19 +10344,19 @@ Do you want to save your changes? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Margen izquierdo de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. + Margen izquierdo de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Margen derecho de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. + Margen derecho de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Margen superior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. + Margen superior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Margen inferior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. + Margen inferior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. Shift length must be used together with shift units. @@ -10332,27 +10388,27 @@ Do you want to save your changes? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Las unidades de ancho/largo de página (no pueden usarse con "%1", modo de exportación). Valores válidos: %2. + Las unidades de ancho/largo de página (no pueden usarse con "%1", modo de exportación). Valores válidos: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Ignorar margenes de impresión (modo de exportación) . Deshabilita claves de valores: "%1", "%2", "%3", "%4". Establece todos los margenes a 0. + Ignorar margenes de impresión (modo de exportación) . Deshabilita claves de valores: "%1", "%2", "%3", "%4". Establece todos los margenes a 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Margen izquierdo de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. El valor se ignorará si se usa la clave "%1". + Margen izquierdo de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. El valor se ignorará si se usa la clave "%1". Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Margen derecho de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. El valor se ignorará si se usa la clave "%1". + Margen derecho de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. El valor se ignorará si se usa la clave "%1". Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Margen superior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. El valor se ignorará si se usa la clave "%1". + Margen superior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. El valor se ignorará si se usa la clave "%1". Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Margen inferior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. El valor se ignorará si se usa la clave "%1". + Margen inferior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. El valor se ignorará si se usa la clave "%1". Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10400,7 +10456,7 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - Número correspondiente a plantilla de página (por defecto = 0, modo de esportación): + Número correspondiente a plantilla de página (por defecto = 0, modo de esportación): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10462,6 +10518,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11829,6 +11957,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_fi_FI.ts b/share/translations/valentina_fi_FI.ts index b5bbf66fa..9d3d1ec2c 100644 --- a/share/translations/valentina_fi_FI.ts +++ b/share/translations/valentina_fi_FI.ts @@ -533,6 +533,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -640,6 +648,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -810,6 +826,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -841,6 +865,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -4437,14 +4469,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -4940,6 +4972,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5063,6 +5103,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -7205,6 +7253,14 @@ Haluatko tallentaa muutokset? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QCoreApplication @@ -9004,10 +9060,6 @@ Do you want to save your changes? Grouping type - - Cannot use pageformat and page explicit size/units together. - - Page height, width, units must be used all 3 at once. @@ -9080,6 +9132,22 @@ Do you want to save your changes? Pattern file. Kaava tiedosto. + + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + Gap width must be used together with shift units. @@ -9104,30 +9172,6 @@ Do you want to save your changes? The path to output destination folder. By default the directory at which the application was started. - - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - - - - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - - - - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -9168,10 +9212,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -9232,6 +9272,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -10472,6 +10584,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_fr_FR.ts b/share/translations/valentina_fr_FR.ts index 22bb7b997..dda5c9d8f 100644 --- a/share/translations/valentina_fr_FR.ts +++ b/share/translations/valentina_fr_FR.ts @@ -661,6 +661,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -5058,11 +5090,11 @@ Apply settings anyway? - ... - ... + Browse… + - Browse… + cm @@ -5580,6 +5612,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5715,6 +5755,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8098,6 +8146,14 @@ Voulez-vous sauvegarder les changements? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10166,7 +10222,7 @@ Voulez-vous enregistrer les changements? Cannot use pageformat and page explicit size/units together. - On ne peut utiliser un format de page et une longueur/largeur explicite. + On ne peut utiliser un format de page et une longueur/largeur explicite. Page height, width, units must be used all 3 at once. @@ -10266,19 +10322,19 @@ Voulez-vous enregistrer les changements? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Marge gauche de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. + Marge gauche de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Marge droite de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. + Marge droite de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Marge haute de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. + Marge haute de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Marge basse de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. + Marge basse de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. Shift length must be used together with shift units. @@ -10310,27 +10366,27 @@ Voulez-vous enregistrer les changements? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Unité de mesure des hauteur/largeur de la page ("%1" ne peut pas être utilisé, mode exportation). Valeur valide: %2. + Unité de mesure des hauteur/largeur de la page ("%1" ne peut pas être utilisé, mode exportation). Valeur valide: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Ignorer les marges d'impression (mode export). Inactive les valeurs clés: "%1", "%2", "%3", "%4". Règle les marge à 0. + Ignorer les marges d'impression (mode export). Inactive les valeurs clés: "%1", "%2", "%3", "%4". Règle les marge à 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Marge gauche de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. La valeur sera ignorée si "%1" est utilisé. + Marge gauche de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. La valeur sera ignorée si "%1" est utilisé. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Marge droite de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. La valeur sera ignorée si "%1" est utilisé. + Marge droite de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. La valeur sera ignorée si "%1" est utilisé. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Marge haute de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. La valeur sera ignorée si "%1" est utilisé. + Marge haute de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. La valeur sera ignorée si "%1" est utilisé. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Marge basse de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. La valeur sera ignorée si "%1" est utilisé. + Marge basse de la page en unité courante, ex. 3.0 (mode exportation). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvé. La valeur sera ignorée si "%1" est utilisé. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10378,7 +10434,7 @@ Voulez-vous enregistrer les changements? Number corresponding to page template (default = 0, export mode): - Numéro correspondant au modèle de page (défaut=0, mode export) : + Numéro correspondant au modèle de page (défaut=0, mode export) : Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10440,6 +10496,78 @@ Voulez-vous enregistrer les changements? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11790,6 +11918,10 @@ Voulez-vous enregistrer les changements? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_he_IL.ts b/share/translations/valentina_he_IL.ts index 18d82f794..2a4859d7d 100644 --- a/share/translations/valentina_he_IL.ts +++ b/share/translations/valentina_he_IL.ts @@ -346,6 +346,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -433,6 +441,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -579,6 +595,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -610,6 +634,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -3760,11 +3792,11 @@ Apply settings anyway? - ... - ... + Browse… + - Browse… + cm @@ -4202,6 +4234,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -4297,6 +4337,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -6244,6 +6292,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QCoreApplication @@ -7930,10 +7986,6 @@ Do you want to save your changes? Grouping type - - Cannot use pageformat and page explicit size/units together. - - Page height, width, units must be used all 3 at once. @@ -8006,6 +8058,22 @@ Do you want to save your changes? Pattern file. + + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + Gap width must be used together with shift units. @@ -8030,30 +8098,6 @@ Do you want to save your changes? The path to output destination folder. By default the directory at which the application was started. - - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - - - - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - - - - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -8094,10 +8138,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -8158,6 +8198,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -9293,6 +9405,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_id_ID.ts b/share/translations/valentina_id_ID.ts index 469d2dabf..071d092ab 100644 --- a/share/translations/valentina_id_ID.ts +++ b/share/translations/valentina_id_ID.ts @@ -509,6 +509,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -608,6 +616,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -774,6 +790,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -805,6 +829,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -4086,6 +4118,10 @@ Apply settings anyway? Browse… + + cm + cm + DialogSaveLayout @@ -4525,6 +4561,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -4620,6 +4664,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -6584,6 +6636,14 @@ Apakah anda ingin menyimpan perubahan anda? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QCoreApplication @@ -8312,10 +8372,6 @@ Do you want to save your changes? Grouping type - - Cannot use pageformat and page explicit size/units together. - - Page height, width, units must be used all 3 at once. @@ -8388,6 +8444,22 @@ Do you want to save your changes? Pattern file. Berkas pola. + + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + Gap width must be used together with shift units. @@ -8412,30 +8484,6 @@ Do you want to save your changes? The path to output destination folder. By default the directory at which the application was started. - - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - - - - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - - - - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -8476,10 +8524,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -8540,6 +8584,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -9687,6 +9803,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_it_IT.ts b/share/translations/valentina_it_IT.ts index 8a8235f4e..09c129d18 100644 --- a/share/translations/valentina_it_IT.ts +++ b/share/translations/valentina_it_IT.ts @@ -661,6 +661,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -973,6 +997,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -4960,14 +4992,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -5483,6 +5515,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5618,6 +5658,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -7993,6 +8041,14 @@ Vuoi salvare i cambiamenti? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10061,7 +10117,7 @@ Vuoi salvare le tue modifiche? Cannot use pageformat and page explicit size/units together. - Impossibile usare il formato pagina e misure/unità esplicite della pagina assieme. + Impossibile usare il formato pagina e misure/unità esplicite della pagina assieme. Page height, width, units must be used all 3 at once. @@ -10161,19 +10217,19 @@ Vuoi salvare le tue modifiche? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Margine della pagina a sinistra in unità correnti come 3.0 (modalità di esportazione). Ne non impostato verrà utilizzato il valore di default della stampante. O 0 se nessuna stampante viene trovata. + Margine della pagina a sinistra in unità correnti come 3.0 (modalità di esportazione). Ne non impostato verrà utilizzato il valore di default della stampante. O 0 se nessuna stampante viene trovata. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Margine della pagina a destra in unità correnti come 3.0 (modalità di esportazione). Se non impostato verrà utilizzato il valore di default della stampante. O 0 se nessuna stampante viene trovata. + Margine della pagina a destra in unità correnti come 3.0 (modalità di esportazione). Se non impostato verrà utilizzato il valore di default della stampante. O 0 se nessuna stampante viene trovata. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Il margine in alto della pagina è 3.0 delle correnti unità (modalità di esportazione). Se non impostato diversamente, verrà utilizzato il valore di default della stampante. O 0 se nonviene trovata alcuna stampante. + Il margine in alto della pagina è 3.0 delle correnti unità (modalità di esportazione). Se non impostato diversamente, verrà utilizzato il valore di default della stampante. O 0 se nonviene trovata alcuna stampante. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Il margine in basso della pagina è 3.0 delle correnti unità (modalità di esportazione). Se non viene impostato in un altro modo, verrà utilizzato il valore di default della stampante. Oppure 0 se non viene trovata alcuna stampante. + Il margine in basso della pagina è 3.0 delle correnti unità (modalità di esportazione). Se non viene impostato in un altro modo, verrà utilizzato il valore di default della stampante. Oppure 0 se non viene trovata alcuna stampante. Shift length must be used together with shift units. @@ -10205,27 +10261,19 @@ Vuoi salvare le tue modifiche? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Unità di misura di altezza/larghezza pagina (non possono venire utilizzate con "%1", modalità di esportazione). Valori corretti: %2. + Unità di misura di altezza/larghezza pagina (non possono venire utilizzate con "%1", modalità di esportazione). Valori corretti: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Ignora i margini di stampa (modalità di esportazione). Sono disabilitati i valori "%1", "%2", "%3", "%4". Imposta tutti i margini a 0. + Ignora i margini di stampa (modalità di esportazione). Sono disabilitati i valori "%1", "%2", "%3", "%4". Imposta tutti i margini a 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Margine sinistro della pagina è nelle unità correnti 3.0 (modalità di esportazione). Se non impostato verrà utilizzato il valore di default della stampante. Oppure 0 se nessuna stampante viene trovata. Il valore verrà ignorato se viene utilizzato "%1". + Margine sinistro della pagina è nelle unità correnti 3.0 (modalità di esportazione). Se non impostato verrà utilizzato il valore di default della stampante. Oppure 0 se nessuna stampante viene trovata. Il valore verrà ignorato se viene utilizzato "%1". Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Margine destro della pagina è in unità correnti 3.0 (modalità di esportazione). Se non impostato verrà utilizzato il valore di default della stampante. Oppure 0 se nessuna stampante viene trovata. Se viene utilizzato "%1" il valore verrà ignorato. - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - + Margine destro della pagina è in unità correnti 3.0 (modalità di esportazione). Se non impostato verrà utilizzato il valore di default della stampante. Oppure 0 se nessuna stampante viene trovata. Se viene utilizzato "%1" il valore verrà ignorato. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10267,10 +10315,6 @@ Vuoi salvare le tue modifiche? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10331,6 +10375,78 @@ Vuoi salvare le tue modifiche? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11560,6 +11676,10 @@ Vuoi salvare le tue modifiche? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_nl_NL.ts b/share/translations/valentina_nl_NL.ts index 8a705e4cc..63a475d53 100644 --- a/share/translations/valentina_nl_NL.ts +++ b/share/translations/valentina_nl_NL.ts @@ -661,6 +661,14 @@ Pen style: Pen stijl: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: Pen stijl: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: Pen stijl: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: Pen stijl: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -5060,14 +5092,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -5583,6 +5615,14 @@ Apply settings anyway? Pen style: Pen stijl: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5718,6 +5758,14 @@ Apply settings anyway? Pen style: Pen stijl: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8112,6 +8160,14 @@ Do you want to save your changes? Remeber pattern materials Herinner patroon materialen + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10188,7 +10244,7 @@ Wil je deze veranderingen opslaan? Cannot use pageformat and page explicit size/units together. - Kan papierformaat en expliciete paginagrootte/eenheden niet tegelijkertijd gebruiken. + Kan papierformaat en expliciete paginagrootte/eenheden niet tegelijkertijd gebruiken. Page height, width, units must be used all 3 at once. @@ -10288,19 +10344,19 @@ Wil je deze veranderingen opslaan? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Linker pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. + Linker pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Rechter pagina marge in huidige eenheden zoals 3.0 ( export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. + Rechter pagina marge in huidige eenheden zoals 3.0 ( export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Top pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. + Top pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Onderste pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. + Onderste pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Shift length must be used together with shift units. @@ -10332,27 +10388,27 @@ Wil je deze veranderingen opslaan? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Hoogte/breedte pagina maten eenheden (kan niet worden gebruikt met "%1", export-modus). Geldige waarden: %2. + Hoogte/breedte pagina maten eenheden (kan niet worden gebruikt met "%1", export-modus). Geldige waarden: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Negeer afdrukmarges (export modus). Maak de waarde sleutels onbruikbaar: "%1", "%2", "%3", "%4". Stel alle marges in op 0. + Negeer afdrukmarges (export modus). Maak de waarde sleutels onbruikbaar: "%1", "%2", "%3", "%4". Stel alle marges in op 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Linker pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Waarde wordt genegeerd als sleutel "%1" wordt gebruikt. + Linker pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Waarde wordt genegeerd als sleutel "%1" wordt gebruikt. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Rechter pagina marge in huidige eenheden zoals 3.0 ( export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Waarde wordt genegeerd als sleutel "%1" wordt gebruikt. + Rechter pagina marge in huidige eenheden zoals 3.0 ( export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Waarde wordt genegeerd als sleutel "%1" wordt gebruikt. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Bovenste pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Waarde wordt genegeerd als sleutel "%1" wordt gebruikt. + Bovenste pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Waarde wordt genegeerd als sleutel "%1" wordt gebruikt. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Onderste pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Waarde wordt genegeerd als sleutel "%1" wordt gebruikt. + Onderste pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. Waarde wordt genegeerd als sleutel "%1" wordt gebruikt. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10400,7 +10456,7 @@ Wil je deze veranderingen opslaan? Number corresponding to page template (default = 0, export mode): - Nummer behorende bij de pagina sjabloon( standaardinstelling = 0, export modus): + Nummer behorende bij de pagina sjabloon( standaardinstelling = 0, export modus): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10462,6 +10518,78 @@ Wil je deze veranderingen opslaan? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11829,6 +11957,10 @@ Wil je deze veranderingen opslaan? Pen style: Pen stijl: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_pl_PL.ts b/share/translations/valentina_pl_PL.ts index 33fb019b5..92cd01b2e 100644 --- a/share/translations/valentina_pl_PL.ts +++ b/share/translations/valentina_pl_PL.ts @@ -639,6 +639,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -746,6 +754,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -912,6 +928,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -943,6 +967,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -4351,14 +4383,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -4822,6 +4854,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -4925,6 +4965,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -7022,6 +7070,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QCommandLineParser @@ -8892,10 +8948,6 @@ Do you want to save your changes? Grouping type - - Cannot use pageformat and page explicit size/units together. - - Page height, width, units must be used all 3 at once. @@ -8968,6 +9020,22 @@ Do you want to save your changes? Pattern file. Plik wykroju. + + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + Gap width must be used together with shift units. @@ -8992,30 +9060,6 @@ Do you want to save your changes? The path to output destination folder. By default the directory at which the application was started. - - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - - - - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - - - - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -9056,10 +9100,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -9120,6 +9160,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -10283,6 +10395,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_pt_BR.ts b/share/translations/valentina_pt_BR.ts index 2cc0ebde3..7371d4dbe 100644 --- a/share/translations/valentina_pt_BR.ts +++ b/share/translations/valentina_pt_BR.ts @@ -661,6 +661,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -4885,14 +4917,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -5372,6 +5404,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5475,6 +5515,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -7488,6 +7536,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QCoreApplication @@ -9283,10 +9339,6 @@ Do you want to save your changes? Grouping type - - Cannot use pageformat and page explicit size/units together. - - Page height, width, units must be used all 3 at once. @@ -9359,6 +9411,22 @@ Do you want to save your changes? Pattern file. + + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + Gap width must be used together with shift units. @@ -9383,30 +9451,6 @@ Do you want to save your changes? The path to output destination folder. By default the directory at which the application was started. - - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - - - - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - - - - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -9447,10 +9491,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -9511,6 +9551,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -10696,6 +10808,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_ro_RO.ts b/share/translations/valentina_ro_RO.ts index 2dc7a0a4d..d0e808f37 100644 --- a/share/translations/valentina_ro_RO.ts +++ b/share/translations/valentina_ro_RO.ts @@ -634,6 +634,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -741,6 +749,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -911,6 +927,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -942,6 +966,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -4510,14 +4542,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + cm + DialogSaveLayout @@ -4989,6 +5021,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5112,6 +5152,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -7182,6 +7230,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QCoreApplication @@ -8969,10 +9025,6 @@ Do you want to save your changes? Grouping type - - Cannot use pageformat and page explicit size/units together. - - Page height, width, units must be used all 3 at once. @@ -9045,6 +9097,22 @@ Do you want to save your changes? Pattern file. + + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + Gap width must be used together with shift units. @@ -9069,30 +9137,6 @@ Do you want to save your changes? The path to output destination folder. By default the directory at which the application was started. - - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - - - - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - - - - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -9133,10 +9177,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -9197,6 +9237,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -10360,6 +10472,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_ru_RU.ts b/share/translations/valentina_ru_RU.ts index 276034c76..13469955c 100644 --- a/share/translations/valentina_ru_RU.ts +++ b/share/translations/valentina_ru_RU.ts @@ -661,6 +661,14 @@ Pen style: Стиль пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: Стиль пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: Стиль пера: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: Стиль пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -5060,14 +5092,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + см + DialogSaveLayout @@ -5583,6 +5615,14 @@ Apply settings anyway? Pen style: Стиль пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5718,6 +5758,14 @@ Apply settings anyway? Pen style: Стиль пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8113,6 +8161,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10189,7 +10245,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - Невозможно одновременно использовать формат страницы и явно указанный размер страницы. + Невозможно одновременно использовать формат страницы и явно указанный размер страницы. Page height, width, units must be used all 3 at once. @@ -10289,19 +10345,19 @@ Do you want to save your changes? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Левое поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. + Левое поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Правое поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. + Правое поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Верхнее поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. + Верхнее поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Нижнее поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. + Нижнее поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Shift length must be used together with shift units. @@ -10333,27 +10389,27 @@ Do you want to save your changes? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Единицы измерения высоты и ширины страницы (невозможно использовать с "%1", режим экспорта). Допустимые значения: %2. + Единицы измерения высоты и ширины страницы (невозможно использовать с "%1", режим экспорта). Допустимые значения: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Игнорировать поля печати (режим экспорта). Отключает значения ключей: "%1", "%2", "%3", "%4". Устанавливает все поля в 0. + Игнорировать поля печати (режим экспорта). Отключает значения ключей: "%1", "%2", "%3", "%4". Устанавливает все поля в 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Левое поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Значение будет проигнорировано, если был использован ключ "%1". + Левое поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Значение будет проигнорировано, если был использован ключ "%1". Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Правое поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Значение будет игнорировано, если был использован ключ "%1". + Правое поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Значение будет игнорировано, если был использован ключ "%1". Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Верхнее поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Значение будет игнорировано, если был использован ключ "%1". + Верхнее поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Значение будет игнорировано, если был использован ключ "%1". Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Нижнее поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Значение будет игнорировано, если был использован ключ "%1". + Нижнее поле страницы в текущих единицах, например 3.0 (режим экспорта). Если не установлено, будет использовано значение из принтера по умолчанию. Или 0, если принтеры не были обнаружены. Значение будет игнорировано, если был использован ключ "%1". Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10401,7 +10457,7 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - Номер, соответствующий шаблону страницы (по умолчанию = 0, режим экспорта): + Номер, соответствующий шаблону страницы (по умолчанию = 0, режим экспорта): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10463,6 +10519,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11830,6 +11958,10 @@ Do you want to save your changes? Pen style: Стиль пера: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_uk_UA.ts b/share/translations/valentina_uk_UA.ts index 720d9e7cc..a29661a80 100644 --- a/share/translations/valentina_uk_UA.ts +++ b/share/translations/valentina_uk_UA.ts @@ -661,6 +661,14 @@ Pen style: Тип пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -768,6 +776,14 @@ Pen style: Тип пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -942,6 +958,14 @@ Pen Style: Тип пера: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -977,6 +1001,14 @@ Pen style: Тип пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -5060,14 +5092,14 @@ Apply settings anyway? Orientation: - - ... - ... - Browse… + + cm + см + DialogSaveLayout @@ -5583,6 +5615,14 @@ Apply settings anyway? Pen style: Тип пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -5718,6 +5758,14 @@ Apply settings anyway? Pen style: Тип пера: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -8112,6 +8160,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QApplication @@ -10188,7 +10244,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - Неможливо одночасно використовувати формат сторінки і явно вказаний розмір сторінки. + Неможливо одночасно використовувати формат сторінки і явно вказаний розмір сторінки. Page height, width, units must be used all 3 at once. @@ -10288,19 +10344,19 @@ Do you want to save your changes? Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Ліве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. + Ліве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Праве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. + Праве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Верхнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. + Верхнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - Нижнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. + Нижнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Shift length must be used together with shift units. @@ -10332,27 +10388,27 @@ Do you want to save your changes? Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - Одиниці вимірювання висоти та ширини сторінки (неможливо використовувати разом з "%1", режим експорту). Допустимі значення: %2. + Одиниці вимірювання висоти та ширини сторінки (неможливо використовувати разом з "%1", режим експорту). Допустимі значення: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - Ігнорувати поля друку (режим експорту). Вимикає значення ключей: "%1", "%2", "%3", "%4". Встановлює всі поля в 0. + Ігнорувати поля друку (режим експорту). Вимикає значення ключей: "%1", "%2", "%3", "%4". Встановлює всі поля в 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Ліве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Значення будет проігноровано якщо був використан ключ "%1". + Ліве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Значення будет проігноровано якщо був використан ключ "%1". Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Праве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Значення будет проігноровано якщо був використан ключ "%1". + Праве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Значення будет проігноровано якщо був використан ключ "%1". Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Верхнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Значення будет проігноровано якщо був використан ключ "%1". + Верхнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Значення будет проігноровано якщо був використан ключ "%1". Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - Нижнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Значення будет проігноровано якщо був використан ключ "%1". + Нижнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. Значення будет проігноровано якщо був використан ключ "%1". Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -10400,7 +10456,7 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - Номер, відповідаючий шаблону (за замовчуванням = 0, режим експорту): + Номер, відповідаючий шаблону (за замовчуванням = 0, режим експорту): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -10462,6 +10518,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -11828,6 +11956,10 @@ Do you want to save your changes? Pen style: Тип пера: + + Approximation scale: + + VToolPointOfContact diff --git a/share/translations/valentina_zh_CN.ts b/share/translations/valentina_zh_CN.ts index de02e91ac..de181ed9f 100644 --- a/share/translations/valentina_zh_CN.ts +++ b/share/translations/valentina_zh_CN.ts @@ -488,6 +488,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogArcWithLength @@ -567,6 +575,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogBisector @@ -709,6 +725,14 @@ Pen Style: + + Approximation Scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCubicBezierPath @@ -740,6 +764,14 @@ Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogCurveIntersectAxis @@ -3829,6 +3861,10 @@ Apply settings anyway? Browse… + + cm + + DialogSaveLayout @@ -4276,6 +4312,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogSplinePath @@ -4375,6 +4419,14 @@ Apply settings anyway? Pen style: + + Approximation scale: + + + + Set approximation scale for this curve, 0 - use global value + + DialogTapePreferences @@ -6332,6 +6384,14 @@ Do you want to save your changes? Remeber pattern materials + + Curve approximation: + + + + Set default curve approximation scale + + QCoreApplication @@ -8087,10 +8147,6 @@ Do you want to save your changes? Grouping type - - Cannot use pageformat and page explicit size/units together. - - Page height, width, units must be used all 3 at once. @@ -8163,6 +8219,22 @@ Do you want to save your changes? Pattern file. + + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + + + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. + + Gap width must be used together with shift units. @@ -8187,30 +8259,6 @@ Do you want to save your changes? The path to output destination folder. By default the directory at which the application was started. - - Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. - - - - Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. - - - - Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - - - Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. - - Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. @@ -8251,10 +8299,6 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - - Number corresponding to page template (default = 0, export mode): - - Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. @@ -8315,6 +8359,78 @@ Do you want to save your changes? Path to csv file + + Number corresponding to layout page template (default = 0, export mode): + + + + Page measure units (export mode). Valid values: %2. + + + + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. + + + + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): + + + + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The left margin + + + + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. + + + + The right margin + + + + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The top margin + + + + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. + + + + The bottom margin + + + + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. + + + + Cannot use pageformat and page explicit size together. + + + + Tiled left margin must be used together with page units. + + + + Tiled right margin must be used together with page units. + + + + Tiled top margin must be used together with page units. + + + + Tiled bottom margin must be used together with page units. + + VCommonSettings @@ -9446,6 +9562,10 @@ Do you want to save your changes? Pen style: + + Approximation scale: + + VToolPointOfContact