Add base realization of equdistant. Fix two bugs.

container/vcontainer.cpp

@@ -256,15 +256,118 @@ QPainterPath VContainer::ContourPath(qint64 idDetail) const{
             break;
         }
     }
+    QPainterPath ekv = Equidistant(points, Detail::CloseEquidistant, toPixel(10));
     QPainterPath path;
     path.moveTo(points[0]);
     for (qint32 i = 1; i < points.count(); ++i){
         path.lineTo(points[i]);
     }
     path.lineTo(points[0]);
+    path.addPath(ekv);
     return path;
 }
 
+QPainterPath VContainer::Equidistant(QVector<QPointF> points, const Detail::Equidistant &eqv,
+                                     const qreal &width) const{
+    QPainterPath ekv;
+    QVector<QPointF> ekvPoints;
+    if ( points.size() < 3 ){
+        qDebug()<<"Not enough points for build equidistant.\n";
+        return ekv;
+    }
+    for (qint32 i = 0; i < points.size(); ++i ){
+        if(i != points.size()-1){
+            if(points[i] == points[i+1]){
+                points.remove(i+1);
+            }
+        } else {
+            if(points[i] == points[0]){
+                points.remove(i);
+            }
+        }
+    }
+    if(eqv == Detail::CloseEquidistant){
+        points.append(points.at(0));
+    }
+    for (qint32 i = 0; i < points.size(); ++i ){
+        if ( i == 0 && eqv == Detail::CloseEquidistant){//перша точка, ламана замкнена
+            ekvPoints<<EkvPoint(QLineF(points[points.size()-2], points[points.size()-1]),
+                    QLineF(points[1], points[0]), width);
+            continue;
+        } else if(i == 0 && eqv == Detail::OpenEquidistant){//перша точка, ламана не замкнена
+            ekvPoints.append(SingleParallelPoint(QLineF(points[0], points[1]), 90, width));
+            continue;
+        }
+        if(i == points.size()-1 && eqv == Detail::CloseEquidistant){//остання точка, ламана замкнена
+            ekvPoints.append(ekvPoints.at(0));
+            continue;
+        } else if(i == points.size()-1 && eqv == Detail::OpenEquidistant){//остання точка, ламана не замкнена
+                ekvPoints.append(SingleParallelPoint(QLineF(points[points.size()-1],
+                                                   points[points.size()-2]), -90, width));
+                continue;
+        }
+        //точка яка не лежить ні на початку ні в кінці
+        ekvPoints<<EkvPoint(QLineF(points[i-1], points[i]), QLineF(points[i+1], points[i]), width);
+    }
+    ekv.moveTo(ekvPoints[0]);
+    for (qint32 i = 1; i < ekvPoints.count(); ++i){
+        ekv.lineTo(ekvPoints[i]);
+    }
+    return ekv;
+}
+
+QLineF VContainer::ParallelLine(const QLineF &line, qreal width) const{
+    Q_ASSERT(width > 0);
+    QLineF paralel = QLineF (SingleParallelPoint(line, 90, width),
+                             SingleParallelPoint(QLineF(line.p2(), line.p1()), -90, width));
+    return paralel;
+}
+
+QPointF VContainer::SingleParallelPoint(const QLineF &line, const qreal &angle, const qreal &width) const{
+    Q_ASSERT(width > 0);
+    QLineF l = line;
+    l.setAngle( l.angle() + angle );
+    l.setLength( width );
+    return l.p2();
+}
+
+QVector<QPointF> VContainer::EkvPoint(const QLineF &line1, const QLineF &line2, const qreal &width) const{
+    Q_ASSERT(width > 0);
+    QVector<QPointF> points;
+    if(line1.p2() != line2.p2()){
+        qWarning()<<"Last point of two lines must be equal.";
+    }
+    QPointF CrosPoint;
+    QLineF bigLine1 = ParallelLine(line1, width );
+    QLineF bigLine2 = ParallelLine(QLineF(line2.p2(), line2.p1()), width );
+    QLineF::IntersectType type = bigLine1.intersect( bigLine2, &CrosPoint );
+    switch(type){
+    case(QLineF::BoundedIntersection):
+        points.append(CrosPoint);
+        return points;
+        break;
+    case(QLineF::UnboundedIntersection):{
+        QLineF line( line1.p2(), CrosPoint );
+        if(line.length() > width + toPixel(3)){
+            points.append(bigLine1.p2());
+            line.setLength( width );
+            points.append(line.p2() );
+            points.append(bigLine2.p1());
+        } else {
+            points.append(CrosPoint);
+            return points;
+        }
+        break;
+    }
+    case(QLineF::NoIntersection):
+        /*If we have correct lines this means lines lie on a line.*/
+        points.append(bigLine1.p2());
+        return points;
+        break;
+    }
+    return points;
+}
+
 void VContainer::PrepareDetails(QVector<VItem *> &list) const{
     QMapIterator<qint64, VDetail> iDetail(details);
     while (iDetail.hasNext()) {
@@ -279,6 +382,7 @@ void VContainer::RemoveIncrementTableRow(const QString& name){
 
 template <typename val>
 void VContainer::UpdateObject(QMap<qint64, val> &obj, const qint64 &id, const val& point){
+    Q_ASSERT_X(id > 0, Q_FUNC_INFO, "id <= 0");
     obj[id] = point;
     UpdateId(id);
 }

container/vcontainer.h

@@ -122,6 +122,11 @@ public:
     void  UpdateId(qint64 newId);
     void  IncrementReferens(qint64 id, Scene::Type obj, Draw::Mode mode = Draw::Calculation);
     QPainterPath ContourPath(qint64 idDetail) const;
+    QPainterPath Equidistant(QVector<QPointF> points, const Detail::Equidistant &eqv,
+                             const qreal &width)const;
+    QLineF ParallelLine(const QLineF &line, qreal width ) const;
+    QPointF SingleParallelPoint(const QLineF &line, const qreal &angle, const qreal &width)const;
+    QVector<QPointF> EkvPoint(const QLineF &line1, const QLineF &line2, const qreal &width)const;
     void PrepareDetails(QVector<VItem*> & list)const;
 private:
     static qint64         _id;

dialogs/dialogtool.cpp

@@ -3,6 +3,7 @@
 #include <QCloseEvent>
 #include "container/calculator.h"
 #include "geometry/vdetail.h"
+#include <QDebug>
 
 DialogTool::DialogTool(const VContainer *data, Draw::Mode mode, QWidget *parent):QDialog(parent), data(data),
     isInitialized(false), flagName(true), flagFormula(true), timerFormula(0), bOk(0), spinBoxAngle(0),

geometry/vdetail.h

@@ -6,6 +6,20 @@
 #include <QString>
 #include <QPainterPath>
 
+namespace Detail{
+    enum Contour
+    {
+        OpenContour,
+        CloseContour
+    };
+
+    enum Equidistant
+    {
+        OpenEquidistant,
+        CloseEquidistant
+    };
+}
+
 class VDetail
 {
 public:

geometry/vspline.cpp

@@ -771,12 +771,27 @@ QVector<QPointF> VSpline::SplinePoints(QPointF p1, QPointF p4, qreal angle1, qre
     return GetPoints(p1, p2, p3, p4);
 }
 
-qint64 VSpline::getIdObject() const
+qint64 VSpline::getIdObject() const{
-{
     return idObject;
 }
 
-void VSpline::setIdObject(const qint64 &value)
+void VSpline::setIdObject(const qint64 &value){
-{
     idObject = value;
 }
+
+const VSpline &VSpline::operator =(const VSpline &spline){
+    this->p1 = spline.GetP1 ();
+    this->p2 = spline.GetP2 ();
+    this->p3 = spline.GetP3 ();
+    this->p4 = spline.GetP4 ();
+    this->angle1 = spline.GetAngle1 ();
+    this->angle2 = spline.GetAngle2 ();
+    this->kAsm1 = spline.GetKasm1();
+    this->kAsm2 = spline.GetKasm2();
+    this->kCurve = spline.GetKcurve();
+    this->points = spline.GetDataPoints();
+    this->_referens = 0;
+    this->mode = spline.getMode();
+    this->idObject = spline.getIdObject();
+    return *this;
+}

geometry/vspline.h

@@ -168,7 +168,7 @@ public:
                                          qreal angle2, qreal kAsm1, qreal kAsm2, qreal kCurve);
     qint64 getIdObject() const;
     void setIdObject(const qint64 &value);
-
+    const VSpline &operator=(const VSpline &spl);
 protected:
     /**
      * @brief GetPoints повертає точки з яких складається сплайн.

tools/drawTools/vdrawtool.cpp

@@ -1,4 +1,5 @@
 #include "vdrawtool.h"
+#include <QDebug>
 
 VDrawTool::VDrawTool(VDomDocument *doc, VContainer *data, qint64 id, QObject *parent) :
     VAbstractTool(doc, data, id, parent), ignoreContextMenuEvent(false),

tools/drawTools/vtoollinepoint.cpp

@@ -4,6 +4,7 @@ VToolLinePoint::VToolLinePoint(VDomDocument *doc, VContainer *data, const qint64
                                const QString &typeLine, const QString &formula, const qint64 &basePointId,
                                const qint32 &angle, QGraphicsItem *parent):VToolPoint(doc, data, id, parent),
     typeLine(typeLine), formula(formula), angle(angle), basePointId(basePointId), mainLine(0){
+    Q_ASSERT_X(basePointId > 0, Q_FUNC_INFO, "basePointId <= 0");
     //Лінія, що з'єднує дві точки
     QPointF point1 = data->GetPoint(basePointId).toQPointF();
     QPointF point2 = data->GetPoint(id).toQPointF();

tools/modelingTools/vmodelingspline.cpp

@@ -78,10 +78,7 @@ VModelingSpline *VModelingSpline::Create(const qint64 _id, const qint64 &p1, con
     } else {
         data->UpdateModelingSpline(id, spline);
         if(parse != Document::FullParse){
-            QMap<qint64, VDataTool*>* tools = doc->getTools();
+            doc->UpdateToolData(id, data);
-            VDataTool *tool = tools->value(id);
-            Q_CHECK_PTR(tool);
-            tool->VDataTool::setData(data);
             data->IncrementReferens(id, Scene::Spline, Draw::Modeling);
         }
     }

tools/modelingTools/vmodelingtool.cpp

@@ -1,4 +1,5 @@
 #include "vmodelingtool.h"
+#include <QDebug>
 
 VModelingTool::VModelingTool(VDomDocument *doc, VContainer *data, qint64 id, QObject *parent):
 VAbstractTool(doc, data, id, parent), ignoreContextMenuEvent(false){

tools/vdatatool.cpp

@@ -17,6 +17,5 @@ VContainer VDataTool::getData() const{
 }
 
 void VDataTool::setData(const VContainer *value){
-    data.Clear();
     data = *value;
 }

tools/vtooldetail.cpp

@@ -157,8 +157,8 @@ void VToolDetail::setDialog(){
     }
 }
 
-void VToolDetail::Create(QSharedPointer<DialogDetail> &dialog, VMainGraphicsScene *scene, VDomDocument *doc,
+void VToolDetail::Create(QSharedPointer<DialogDetail> &dialog, VMainGraphicsScene *scene,
-                         VContainer *data){
+                         VDomDocument *doc, VContainer *data){
     VDetail detail = dialog->getDetails();
     VDetail det;
     for(qint32 i = 0; i< detail.CountNode(); ++i){
@@ -302,7 +302,7 @@ void VToolDetail::mouseReleaseEvent(QGraphicsSceneMouseEvent *event){
 void VToolDetail::AddNode(QDomElement &domElement, VNodeDetail &node){
     QDomElement nod = doc->createElement("node");
 
-    AddAttribute(nod, "id", node.getId());
+    AddAttribute(nod, "idObject", node.getId());
     if(node.getTypeNode() == NodeDetail::Contour){
         AddAttribute(nod, "nodeType", "Contour");
     } else {

widgets/vcontrolpointspline.cpp

@@ -46,18 +46,8 @@ void VControlPointSpline::hoverLeaveEvent(QGraphicsSceneHoverEvent *event){
 
 QVariant VControlPointSpline::itemChange(QGraphicsItem::GraphicsItemChange change, const QVariant &value){
     if (change == ItemPositionChange && scene()) {
-        // value - это новое положение.
+        // value - new position.
         QPointF newPos = value.toPointF();
-//        qDebug()<<this->rect();
-//        QRectF rect = scene()->sceneRect();
-//        if (!rect.contains(newPos)) {
-//            // Сохраняем элемент внутри прямоугольника сцены.
-//            newPos.setX(qMin(rect.right(), qMax(newPos.x(), rect.left())));
-//            newPos.setY(qMin(rect.bottom(), qMax(newPos.y(), rect.top())));
-
-//            emit ControlPointChangePosition(indexSpline, position, newPos);
-//            return newPos;
-//        }
         emit ControlPointChangePosition(indexSpline, position, newPos);
     }
     return QGraphicsItem::itemChange(change, value);

xml/vdomdocument.cpp

@@ -82,6 +82,7 @@ void VDomDocument::CreateEmptyFile(){
 }
 
 bool VDomDocument::CheckNameDraw(const QString& name) const{
+    Q_ASSERT_X(!name.isEmpty(), "CheckNameDraw", "name draw is empty");
     QDomNodeList elements = this->documentElement().elementsByTagName( "draw" );
     if(elements.size() == 0){
         return false;
@@ -99,6 +100,7 @@ bool VDomDocument::CheckNameDraw(const QString& name) const{
 }
 
 bool VDomDocument::appendDraw(const QString& name){
+    Q_ASSERT_X(!name.isEmpty(), "appendDraw", "name draw is empty");
     if(name.isEmpty()){
         return false;
     }
@@ -132,6 +134,7 @@ bool VDomDocument::appendDraw(const QString& name){
 }
 
 void VDomDocument::ChangeActivDraw(const QString& name, Document::Enum parse){
+    Q_ASSERT_X(!name.isEmpty(), "ChangeActivDraw", "name draw is empty");
     if(CheckNameDraw(name) == true){
         this->nameActivDraw = name;
         if(parse == Document::FullParse){
@@ -141,12 +144,14 @@ void VDomDocument::ChangeActivDraw(const QString& name, Document::Enum parse){
 }
 
 void VDomDocument::SetNameDraw(const QString& name){
+    Q_ASSERT_X(!name.isEmpty(), "SetNameDraw", "name draw is empty");
     QString oldName = nameActivDraw;
     nameActivDraw = name;
     emit ChangedNameDraw(oldName, nameActivDraw);
 }
 
 void VDomDocument::SetActivDraw(const QString& name){
+    Q_ASSERT_X(!name.isEmpty(), "SetActivDraw", "name draw is empty");
     this->nameActivDraw = name;
 }
 
@@ -201,6 +206,7 @@ bool VDomDocument::GetActivDetailsElement(QDomElement &element){
 }
 
 bool VDomDocument::GetActivNodeElement(const QString& name, QDomElement &element){
+    Q_ASSERT_X(!name.isEmpty(), "GetActivNodeElement", "name draw is empty");
     QDomElement drawElement;
     bool drawOk = this->GetActivDrawElement(drawElement);
     if(drawOk == true){
@@ -219,7 +225,10 @@ bool VDomDocument::GetActivNodeElement(const QString& name, QDomElement &element
     }
 }
 
-void VDomDocument::Parse(Document::Enum parse, VMainGraphicsScene *sceneDraw, VMainGraphicsScene *sceneDetail){
+void VDomDocument::Parse(Document::Enum parse, VMainGraphicsScene *sceneDraw,
+                         VMainGraphicsScene *sceneDetail){
+    Q_CHECK_PTR(sceneDraw);
+    Q_CHECK_PTR(sceneDetail);
     if(parse == Document::FullParse){
         data->Clear();
         nameActivDraw.clear();
@@ -277,16 +286,12 @@ void VDomDocument::ParseIncrementsElement(const QDomNode &node){
             QDomElement domElement = domNode.toElement();
             if(!domElement.isNull()){
                 if(domElement.tagName() == "increment"){
-                    QString name,desc;
+                    qint64 id = GetParametrId(domElement);
-                    qreal base;
+                    QString name = GetParametrString(domElement, "name");
-                    qreal ksize, kgrowth;
+                    qreal base = GetParametrDouble(domElement, "base");
-                    qint64 id;
+                    qreal ksize = GetParametrDouble(domElement, "ksize");
-                    id = domElement.attribute("id", "").toLongLong();
+                    qreal kgrowth = GetParametrDouble(domElement, "kgrowth");
-                    name = domElement.attribute("name", "");
+                    QString desc = GetParametrString(domElement, "description");
-                    base = domElement.attribute("base","").toDouble();
-                    ksize = domElement.attribute("ksize","").toDouble();
-                    kgrowth = domElement.attribute("kgrowth","").toDouble();
-                    desc = domElement.attribute("description","");
                     data->UpdateId(id);
                     data->AddIncrementTableRow(name,
                                                VIncrementTableRow(id, base, ksize, kgrowth, desc));
@@ -297,6 +302,48 @@ void VDomDocument::ParseIncrementsElement(const QDomNode &node){
     }
 }
 
+qint64 VDomDocument::GetParametrId(const QDomElement &domElement) const{
+    qint64 id = GetParametrLongLong(domElement, "id");
+    Q_ASSERT_X(id > 0, Q_FUNC_INFO, "id <= 0");
+    return id;
+}
+
+qint64 VDomDocument::GetParametrLongLong(const QDomElement &domElement, const QString &name) const{
+    Q_ASSERT_X(!name.isEmpty(), Q_FUNC_INFO, "name of parametr is empty");
+    Q_ASSERT_X(!domElement.isNull(), Q_FUNC_INFO, "domElement is null");
+    bool ok = false;
+    QString parametr = GetParametrString(domElement, name);
+    qint64 id = parametr.toLongLong(&ok);
+    QString error("can't convert parametr ");
+    error.append(name);
+    Q_ASSERT_X(ok, Q_FUNC_INFO, error.toLatin1().data());
+    return id;
+}
+
+QString VDomDocument::GetParametrString(const QDomElement &domElement, const QString &name) const{
+    Q_ASSERT_X(!name.isEmpty(), Q_FUNC_INFO, "name of parametr is empty");
+    Q_ASSERT_X(!domElement.isNull(), Q_FUNC_INFO, "domElement is null");
+    QString parametr = domElement.attribute(name, "");
+    QString error("get empty parametr ");
+    error.append(name);
+    Q_ASSERT_X(!parametr.isEmpty(), Q_FUNC_INFO, error.toLatin1().data());
+    return parametr;
+}
+
+qreal VDomDocument::GetParametrDouble(const QDomElement &domElement, const QString &name) const{
+    Q_ASSERT_X(!name.isEmpty(), Q_FUNC_INFO, "name of parametr is empty");
+    Q_ASSERT_X(!domElement.isNull(), Q_FUNC_INFO, "domElement is null");
+    bool ok = false;
+    QString parametr = GetParametrString(domElement, name);
+    qreal param = parametr.toDouble(&ok);
+    QString error("can't convert parametr ");
+    error.append(name);
+    Q_ASSERT_X(ok, Q_FUNC_INFO, error.toLatin1().data());
+    return param;
+}
+
+
+
 void VDomDocument::ParseDrawElement(VMainGraphicsScene *sceneDraw, VMainGraphicsScene *sceneDetail,
                                     const QDomNode& node, Document::Enum parse){
     QDomNode domNode = node.firstChild();
@@ -322,6 +369,8 @@ void VDomDocument::ParseDrawElement(VMainGraphicsScene *sceneDraw, VMainGraphics
 
 void VDomDocument::ParseDrawMode(VMainGraphicsScene *sceneDraw, VMainGraphicsScene *sceneDetail,
                                            const QDomNode& node, Document::Enum parse, Draw::Mode mode){
+    Q_CHECK_PTR(sceneDraw);
+    Q_CHECK_PTR(sceneDetail);
     VMainGraphicsScene *scene = 0;
     if(mode == Draw::Calculation){
         scene = sceneDraw;
@@ -351,13 +400,14 @@ void VDomDocument::ParseDrawMode(VMainGraphicsScene *sceneDraw, VMainGraphicsSce
 
 void VDomDocument::ParseDetailElement(VMainGraphicsScene *sceneDetail, const QDomElement &domElement,
                                       Document::Enum parse){
-    if(!domElement.isNull()){
+    Q_CHECK_PTR(sceneDetail);
+    Q_ASSERT_X(!domElement.isNull(), Q_FUNC_INFO, "domElement is null");
     VDetail detail;
     VDetail oldDetail;
-        qint64 id = domElement.attribute("id", "").toLongLong();
+    qint64 id = GetParametrId(domElement);
-        detail.setName(domElement.attribute("name", ""));
+    detail.setName(GetParametrString(domElement, "name"));
-        detail.setMx(toPixel(domElement.attribute("mx","").toDouble()));
+    detail.setMx(toPixel(GetParametrDouble(domElement, "mx")));
-        detail.setMy(toPixel(domElement.attribute("my","").toDouble()));
+    detail.setMy(toPixel(GetParametrDouble(domElement, "my")));
 
     QDomNodeList nodeList = domElement.childNodes();
     qint32 num = nodeList.size();
@@ -365,11 +415,11 @@ void VDomDocument::ParseDetailElement(VMainGraphicsScene *sceneDetail, const QDo
         QDomElement element = nodeList.at(i).toElement();
         if(!element.isNull()){
             if(element.tagName() == "node"){
-                    qint64 id = element.attribute("id","").toLongLong();
+                qint64 id = GetParametrLongLong(element, "idObject");
                 Tools::Enum tool;
                 Draw::Mode mode;
                 NodeDetail::Type nodeType = NodeDetail::Contour;
-                    QString t = element.attribute("type","");
+                QString t = GetParametrString(element, "type");
                 if(t == "NodePoint"){
                     tool = Tools::NodePoint;
                     VPointF point = data->GetModelingPoint(id);
@@ -419,10 +469,11 @@ void VDomDocument::ParseDetailElement(VMainGraphicsScene *sceneDetail, const QDo
     }
     VToolDetail::Create(id, detail, oldDetail, sceneDetail, this, data, parse, Tool::FromFile);
 }
-}
 
 void VDomDocument::ParseDetails(VMainGraphicsScene *sceneDetail, const QDomElement &domElement,
                                 Document::Enum parse){
+    Q_CHECK_PTR(sceneDetail);
+    Q_ASSERT_X(!domElement.isNull(), Q_FUNC_INFO, "domElement is null");
     QDomNode domNode = domElement.firstChild();
     while(!domNode.isNull()){
         if(domNode.isElement()){
@@ -439,42 +490,40 @@ void VDomDocument::ParseDetails(VMainGraphicsScene *sceneDetail, const QDomEleme
 
 void VDomDocument::ParsePointElement(VMainGraphicsScene *scene, const QDomElement& domElement,
                                      Document::Enum parse, const QString& type, Draw::Mode mode){
+    Q_CHECK_PTR(scene);
+    Q_ASSERT_X(!domElement.isNull(), Q_FUNC_INFO, "domElement is null");
+    Q_ASSERT_X(!type.isEmpty(), Q_FUNC_INFO, "type of point is empty");
     if(type == "single"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        QString name = GetParametrString(domElement, "name");
-            Q_ASSERT(id > 0);
+        qreal x = toPixel(GetParametrDouble(domElement, "x"));
-            QString name = domElement.attribute("name", "");
+        qreal y = toPixel(GetParametrDouble(domElement, "y"));
-            qreal x = domElement.attribute("x","").toDouble()*PrintDPI/25.4;
+        qreal mx = toPixel(GetParametrDouble(domElement, "mx"));
-            qreal y = domElement.attribute("y","").toDouble()*PrintDPI/25.4;
+        qreal my = toPixel(GetParametrDouble(domElement, "my"));
-            qreal mx = domElement.attribute("mx","").toDouble()*PrintDPI/25.4;
-            qreal my = domElement.attribute("my","").toDouble()*PrintDPI/25.4;
 
         data->UpdatePoint(id, VPointF(x, y, name, mx, my));
         VDrawTool::AddRecord(id, Tools::SinglePointTool, this);
         if(parse != Document::FullParse){
-                VDataTool *tool = tools.value(id);
+            UpdateToolData(id, data);
-                Q_CHECK_PTR(tool);
-                tool->VDataTool::setData(data);
         }
         if(parse == Document::FullParse){
             VToolSinglePoint *spoint = new VToolSinglePoint(this, data, id, Tool::FromFile);
+            Q_CHECK_PTR(spoint);
             scene->addItem(spoint);
             connect(spoint, &VToolSinglePoint::ChoosedTool, scene, &VMainGraphicsScene::ChoosedItem);
             tools[id] = spoint;
         }
-        }
         return;
     }
     if(type == "endLine"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        QString name = GetParametrString(domElement, "name");
-            QString name = domElement.attribute("name", "");
+        qreal mx = toPixel(GetParametrDouble(domElement, "mx"));
-            qreal mx = domElement.attribute("mx","").toDouble()*PrintDPI/25.4;
+        qreal my = toPixel(GetParametrDouble(domElement, "my"));
-            qreal my = domElement.attribute("my","").toDouble()*PrintDPI/25.4;
+        QString typeLine = GetParametrString(domElement, "typeLine");
-            QString typeLine = domElement.attribute("typeLine", "");
+        QString formula = GetParametrString(domElement, "length");
-            QString formula = domElement.attribute("length", "");
+        qint64 basePointId = GetParametrLongLong(domElement, "basePoint");
-            qint64 basePointId = domElement.attribute("basePoint", "").toLongLong();
+        qreal angle = GetParametrDouble(domElement, "angle");
-            qint32 angle = domElement.attribute("angle", "").toInt();
         if(mode == Draw::Calculation){
             VToolEndLine::Create(id, name, typeLine, formula, angle, basePointId, mx, my, scene, this,
                                  data, parse, Tool::FromFile);
@@ -482,19 +531,17 @@ void VDomDocument::ParsePointElement(VMainGraphicsScene *scene, const QDomElemen
             VModelingEndLine::Create(id, name, typeLine, formula, angle, basePointId, mx, my, this,
                                      data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "alongLine"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        QString name = GetParametrString(domElement, "name");
-            QString name = domElement.attribute("name", "");
+        qreal mx = toPixel(GetParametrDouble(domElement, "mx"));
-            qreal mx = domElement.attribute("mx","").toDouble()*PrintDPI/25.4;
+        qreal my = toPixel(GetParametrDouble(domElement, "my"));
-            qreal my = domElement.attribute("my","").toDouble()*PrintDPI/25.4;
+        QString typeLine = GetParametrString(domElement, "typeLine");
-            QString typeLine = domElement.attribute("typeLine", "");
+        QString formula = GetParametrString(domElement, "length");
-            QString formula = domElement.attribute("length", "");
+        qint64 firstPointId = GetParametrLongLong(domElement, "firstPoint");
-            qint64 firstPointId = domElement.attribute("firstPoint", "").toLongLong();
+        qint64 secondPointId = GetParametrLongLong(domElement, "secondPoint");
-            qint64 secondPointId = domElement.attribute("secondPoint", "").toLongLong();
         if(mode == Draw::Calculation){
             VToolAlongLine::Create(id, name, typeLine, formula, firstPointId, secondPointId, mx, my,
                                    scene, this, data, parse, Tool::FromFile);
@@ -502,20 +549,18 @@ void VDomDocument::ParsePointElement(VMainGraphicsScene *scene, const QDomElemen
             VModelingAlongLine::Create(id, name, typeLine, formula, firstPointId, secondPointId, mx, my,
                                        this, data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "shoulder"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        QString name = GetParametrString(domElement, "name");
-            QString name = domElement.attribute("name", "");
+        qreal mx = toPixel(GetParametrDouble(domElement, "mx"));
-            qreal mx = domElement.attribute("mx","").toDouble()*PrintDPI/25.4;
+        qreal my = toPixel(GetParametrDouble(domElement, "my"));
-            qreal my = domElement.attribute("my","").toDouble()*PrintDPI/25.4;
+        QString typeLine = GetParametrString(domElement, "typeLine");
-            QString typeLine = domElement.attribute("typeLine", "");
+        QString formula = GetParametrString(domElement, "length");
-            QString formula = domElement.attribute("length", "");
+        qint64 p1Line = GetParametrLongLong(domElement, "p1Line");
-            qint64 p1Line = domElement.attribute("p1Line", "").toLongLong();
+        qint64 p2Line = GetParametrLongLong(domElement, "p2Line");
-            qint64 p2Line = domElement.attribute("p2Line", "").toLongLong();
+        qint64 pShoulder = GetParametrLongLong(domElement, "pShoulder");
-            qint64 pShoulder = domElement.attribute("pShoulder", "").toLongLong();
         if(mode == Draw::Calculation){
             VToolShoulderPoint::Create(id, formula, p1Line, p2Line, pShoulder, typeLine, name, mx, my,
                                        scene, this, data, parse, Tool::FromFile);
@@ -523,20 +568,18 @@ void VDomDocument::ParsePointElement(VMainGraphicsScene *scene, const QDomElemen
             VModelingShoulderPoint::Create(id, formula, p1Line, p2Line, pShoulder, typeLine, name, mx,
                                            my, this, data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "normal"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        QString name = GetParametrString(domElement, "name");
-            QString name = domElement.attribute("name", "");
+        qreal mx = toPixel(GetParametrDouble(domElement, "mx"));
-            qreal mx = domElement.attribute("mx","").toDouble()*PrintDPI/25.4;
+        qreal my = toPixel(GetParametrDouble(domElement, "my"));
-            qreal my = domElement.attribute("my","").toDouble()*PrintDPI/25.4;
+        QString typeLine = GetParametrString(domElement, "typeLine");
-            QString typeLine = domElement.attribute("typeLine", "");
+        QString formula = GetParametrString(domElement, "length");
-            QString formula = domElement.attribute("length", "");
+        qint64 firstPointId = GetParametrLongLong(domElement, "firstPoint");
-            qint64 firstPointId = domElement.attribute("firstPoint", "").toLongLong();
+        qint64 secondPointId = GetParametrLongLong(domElement, "secondPoint");
-            qint64 secondPointId = domElement.attribute("secondPoint", "").toLongLong();
+        qreal angle = GetParametrDouble(domElement, "angle");
-            qreal angle = domElement.attribute("angle", "").toDouble();
         if(mode == Draw::Calculation){
             VToolNormal::Create(id, formula, firstPointId, secondPointId, typeLine, name, angle,
                                 mx, my, scene, this, data, parse, Tool::FromFile);
@@ -544,20 +587,18 @@ void VDomDocument::ParsePointElement(VMainGraphicsScene *scene, const QDomElemen
             VModelingNormal::Create(id, formula, firstPointId, secondPointId, typeLine, name, angle,
                                     mx, my, this, data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "bisector"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        QString name = GetParametrString(domElement, "name");
-            QString name = domElement.attribute("name", "");
+        qreal mx = toPixel(GetParametrDouble(domElement, "mx"));
-            qreal mx = domElement.attribute("mx","").toDouble()*PrintDPI/25.4;
+        qreal my = toPixel(GetParametrDouble(domElement, "my"));
-            qreal my = domElement.attribute("my","").toDouble()*PrintDPI/25.4;
+        QString typeLine = GetParametrString(domElement, "typeLine");
-            QString typeLine = domElement.attribute("typeLine", "");
+        QString formula = GetParametrString(domElement, "length");
-            QString formula = domElement.attribute("length", "");
+        qint64 firstPointId = GetParametrLongLong(domElement, "firstPoint");
-            qint64 firstPointId = domElement.attribute("firstPoint", "").toLongLong();
+        qint64 secondPointId = GetParametrLongLong(domElement, "secondPoint");
-            qint64 secondPointId = domElement.attribute("secondPoint", "").toLongLong();
+        qint64 thirdPointId = GetParametrLongLong(domElement, "thirdPoint");
-            qint64 thirdPointId = domElement.attribute("thirdPoint", "").toLongLong();
         if(mode == Draw::Calculation){
             VToolBisector::Create(id, formula, firstPointId, secondPointId, thirdPointId, typeLine,
                                   name, mx, my, scene, this, data, parse, Tool::FromFile);
@@ -565,19 +606,17 @@ void VDomDocument::ParsePointElement(VMainGraphicsScene *scene, const QDomElemen
             VModelingBisector::Create(id, formula, firstPointId, secondPointId, thirdPointId, typeLine,
                                       name, mx, my, this, data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "lineIntersect"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        QString name = GetParametrString(domElement, "name");
-            QString name = domElement.attribute("name", "");
+        qreal mx = toPixel(GetParametrDouble(domElement, "mx"));
-            qreal mx = domElement.attribute("mx","").toDouble()*PrintDPI/25.4;
+        qreal my = toPixel(GetParametrDouble(domElement, "my"));
-            qreal my = domElement.attribute("my","").toDouble()*PrintDPI/25.4;
+        qint64 p1Line1Id = GetParametrLongLong(domElement, "p1Line1");
-            qint64 p1Line1Id = domElement.attribute("p1Line1", "").toLongLong();
+        qint64 p2Line1Id = GetParametrLongLong(domElement, "p2Line1");
-            qint64 p2Line1Id = domElement.attribute("p2Line1", "").toLongLong();
+        qint64 p1Line2Id = GetParametrLongLong(domElement, "p1Line2");
-            qint64 p1Line2Id = domElement.attribute("p1Line2", "").toLongLong();
+        qint64 p2Line2Id = GetParametrLongLong(domElement, "p2Line2");
-            qint64 p2Line2Id = domElement.attribute("p2Line2", "").toLongLong();
         if(mode == Draw::Calculation){
             VToolLineIntersect::Create(id, p1Line1Id, p2Line1Id, p1Line2Id, p2Line2Id, name, mx, my,
                                        scene, this, data, parse, Tool::FromFile);
@@ -585,19 +624,17 @@ void VDomDocument::ParsePointElement(VMainGraphicsScene *scene, const QDomElemen
             VModelingLineIntersect::Create(id, p1Line1Id, p2Line1Id, p1Line2Id, p2Line2Id, name, mx, my,
                                            this, data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "pointOfContact"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        QString name = GetParametrString(domElement, "name");
-            QString name = domElement.attribute("name", "");
+        qreal mx = toPixel(GetParametrDouble(domElement, "mx"));
-            qreal mx = domElement.attribute("mx","").toDouble()*PrintDPI/25.4;
+        qreal my = toPixel(GetParametrDouble(domElement, "my"));
-            qreal my = domElement.attribute("my","").toDouble()*PrintDPI/25.4;
+        QString radius = GetParametrString(domElement, "radius");
-            QString radius = domElement.attribute("radius", "");
+        qint64 center = GetParametrLongLong(domElement, "center");
-            qint64 center = domElement.attribute("center", "").toLongLong();
+        qint64 firstPointId = GetParametrLongLong(domElement, "firstPoint");
-            qint64 firstPointId = domElement.attribute("firstPoint", "").toLongLong();
+        qint64 secondPointId = GetParametrLongLong(domElement, "secondPoint");
-            qint64 secondPointId = domElement.attribute("secondPoint", "").toLongLong();
         if(mode == Draw::Calculation){
             VToolPointOfContact::Create(id, radius, center, firstPointId, secondPointId, name, mx, my,
                                         scene, this, data, parse, Tool::FromFile);
@@ -605,14 +642,12 @@ void VDomDocument::ParsePointElement(VMainGraphicsScene *scene, const QDomElemen
             VModelingPointOfContact::Create(id, radius, center, firstPointId, secondPointId, name, mx,
                                             my, this, data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "modeling"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        qint64 idObject = GetParametrLongLong(domElement, "idObject");
-            qint64 idObject = domElement.attribute("idObject", "").toLongLong();
+        QString tObject = GetParametrString(domElement, "typeObject");
-            QString tObject = domElement.attribute("typeObject", "");
         VPointF point;
         Draw::Mode typeObject;
         if(tObject == "Calculation"){
@@ -622,42 +657,43 @@ void VDomDocument::ParsePointElement(VMainGraphicsScene *scene, const QDomElemen
             typeObject = Draw::Modeling;
             point = data->GetModelingPoint(idObject);
         }
-            qreal mx = toPixel(domElement.attribute("mx","").toDouble());
+        qreal mx = toPixel(GetParametrDouble(domElement, "mx"));
-            qreal my = toPixel(domElement.attribute("my","").toDouble());
+        qreal my = toPixel(GetParametrDouble(domElement, "my"));
         data->UpdateModelingPoint(id, VPointF(point.x(), point.y(), point.name(), mx, my, typeObject,
                                               idObject ));
         data->IncrementReferens(idObject, Scene::Point, typeObject);
-        }
         return;
     }
 }
 
 void VDomDocument::ParseLineElement(VMainGraphicsScene *scene, const QDomElement &domElement,
                                     Document::Enum parse, Draw::Mode mode){
-    if(!domElement.isNull()){
+    Q_CHECK_PTR(scene);
-        qint64 id = domElement.attribute("id", "").toLongLong();
+    Q_ASSERT_X(!domElement.isNull(), Q_FUNC_INFO, "domElement is null");
-        qint64 firstPoint = domElement.attribute("firstPoint", "").toLongLong();
+    qint64 id = GetParametrId(domElement);
-        qint64 secondPoint = domElement.attribute("secondPoint", "").toLongLong();
+    qint64 firstPoint = GetParametrLongLong(domElement, "firstPoint");
+    qint64 secondPoint = GetParametrLongLong(domElement, "secondPoint");
     if(mode == Draw::Calculation){
         VToolLine::Create(id, firstPoint, secondPoint, scene, this, data, parse, Tool::FromFile);
     } else {
         VModelingLine::Create(id, firstPoint, secondPoint, this, data, parse, Tool::FromFile);
     }
 }
-}
 
 void VDomDocument::ParseSplineElement(VMainGraphicsScene *scene, const QDomElement &domElement,
                                       Document::Enum parse, const QString &type, Draw::Mode mode){
+    Q_CHECK_PTR(scene);
+    Q_ASSERT_X(!domElement.isNull(), Q_FUNC_INFO, "domElement is null");
+    Q_ASSERT_X(!type.isEmpty(), Q_FUNC_INFO, "type of spline is empty");
     if(type == "simple"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        qint64 point1 = GetParametrLongLong(domElement, "point1");
-            qint64 point1 = domElement.attribute("point1", "").toLongLong();
+        qint64 point4 = GetParametrLongLong(domElement, "point4");
-            qint64 point4 = domElement.attribute("point4", "").toLongLong();
+        qreal angle1 = GetParametrDouble(domElement, "angle1");
-            qreal angle1 = domElement.attribute("angle1","").toDouble();
+        qreal angle2 = GetParametrDouble(domElement, "angle2");
-            qreal angle2 = domElement.attribute("angle2","").toDouble();
+        qreal kAsm1 = GetParametrDouble(domElement, "kAsm1");
-            qreal kAsm1 = domElement.attribute("kAsm1","").toDouble();
+        qreal kAsm2 = GetParametrDouble(domElement, "kAsm2");
-            qreal kAsm2 = domElement.attribute("kAsm2","").toDouble();
+        qreal kCurve = GetParametrDouble(domElement, "kCurve");
-            qreal kCurve = domElement.attribute("kCurve","").toDouble();
         if(mode == Draw::Calculation){
             VToolSpline::Create(id, point1, point4, kAsm1, kAsm2, angle1, angle2, kCurve, scene, this,
                                 data, parse, Tool::FromFile);
@@ -665,13 +701,11 @@ void VDomDocument::ParseSplineElement(VMainGraphicsScene *scene, const QDomEleme
             VModelingSpline::Create(id, point1, point4, kAsm1, kAsm2, angle1, angle2, kCurve, this,
                                     data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "path"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        qreal kCurve = GetParametrDouble(domElement, "kCurve");
-            qreal kCurve = domElement.attribute("kCurve","").toDouble();
         VSplinePath path(data->DataPoints(), kCurve);
 
         QDomNodeList nodeList = domElement.childNodes();
@@ -680,10 +714,10 @@ void VDomDocument::ParseSplineElement(VMainGraphicsScene *scene, const QDomEleme
             QDomElement element = nodeList.at(i).toElement();
             if(!element.isNull()){
                 if(element.tagName() == "pathPoint"){
-                        qint64 pSpline = element.attribute("pSpline","").toLongLong();
+                    qint64 pSpline = GetParametrLongLong(domElement, "pSpline");
-                        qreal kAsm1 = element.attribute("kAsm1","").toDouble();
+                    qreal kAsm1 = GetParametrDouble(domElement, "kAsm1");
-                        qreal angle = element.attribute("angle","").toDouble();
+                    qreal angle = GetParametrDouble(domElement, "angle");
-                        qreal kAsm2 = element.attribute("kAsm2","").toDouble();
+                    qreal kAsm2 = GetParametrDouble(domElement, "kAsm2");
                     VSplinePoint splPoint(pSpline, kAsm1, angle, kAsm2);
                     path.append(splPoint);
                 }
@@ -694,14 +728,12 @@ void VDomDocument::ParseSplineElement(VMainGraphicsScene *scene, const QDomEleme
         } else {
             VModelingSplinePath::Create(id, path, this, data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "modelingSpline"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        qint64 idObject = GetParametrLongLong(domElement, "idObject");
-            qint64 idObject = domElement.attribute("idObject", "").toLongLong();
+        QString tObject = GetParametrString(domElement, "typeObject");
-            QString tObject = domElement.attribute("typeObject", "");
         VSpline spl;
         Draw::Mode typeObject;
         if(tObject == "Calculation"){
@@ -716,14 +748,12 @@ void VDomDocument::ParseSplineElement(VMainGraphicsScene *scene, const QDomEleme
         data->UpdateModelingSpline(id, spl);
         data->IncrementReferens(spl.GetP1(), Scene::Point, Draw::Modeling);
         data->IncrementReferens(spl.GetP4(), Scene::Point, Draw::Modeling);
-        }
         return;
     }
     if(type == "modelingPath"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        qint64 idObject = GetParametrLongLong(domElement, "idObject");
-            qint64 idObject = domElement.attribute("idObject", "").toLongLong();
+        QString tObject = GetParametrString(domElement, "typeObject");
-            QString tObject = domElement.attribute("typeObject", "");
         VSplinePath path;
         Draw::Mode typeObject;
         if(tObject == "Calculation"){
@@ -740,33 +770,32 @@ void VDomDocument::ParseSplineElement(VMainGraphicsScene *scene, const QDomEleme
         for(qint32 i = 0; i<points->size(); ++i){
             data->IncrementReferens(points->at(i).P(), Scene::Point, Draw::Modeling);
         }
-        }
         return;
     }
 }
 
 void VDomDocument::ParseArcElement(VMainGraphicsScene *scene, const QDomElement &domElement,
                                    Document::Enum parse, const QString &type, Draw::Mode mode){
+    Q_CHECK_PTR(scene);
+    Q_ASSERT_X(!domElement.isNull(), Q_FUNC_INFO, "domElement is null");
+    Q_ASSERT_X(!type.isEmpty(), Q_FUNC_INFO, "type of spline is empty");
     if(type == "simple"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        qint64 center = GetParametrLongLong(domElement, "center");
-            qint64 center = domElement.attribute("center", "").toLongLong();
+        QString radius = GetParametrString(domElement, "radius");
-            QString radius = domElement.attribute("radius", "");
+        QString f1 = GetParametrString(domElement, "angle1");
-            QString f1 = domElement.attribute("angle1", "");
+        QString f2 = GetParametrString(domElement, "angle2");
-            QString f2 = domElement.attribute("angle2","");
         if(mode == Draw::Calculation){
             VToolArc::Create(id, center, radius, f1, f2, scene, this, data, parse, Tool::FromFile);
         } else {
             VModelingArc::Create(id, center, radius, f1, f2, this, data, parse, Tool::FromFile);
         }
-        }
         return;
     }
     if(type == "modeling"){
-        if(!domElement.isNull()){
+        qint64 id = GetParametrId(domElement);
-            qint64 id = domElement.attribute("id", "").toLongLong();
+        qint64 idObject = GetParametrLongLong(domElement, "idObject");
-            qint64 idObject = domElement.attribute("idObject", "").toLongLong();
+        QString tObject = GetParametrString(domElement, "typeObject");
-            QString tObject = domElement.attribute("typeObject", "");
         VArc arc;
         Draw::Mode typeObject;
         if(tObject == "Calculation"){
@@ -779,13 +808,13 @@ void VDomDocument::ParseArcElement(VMainGraphicsScene *scene, const QDomElement
         arc.setMode(typeObject);
         arc.setIdObject(idObject);
         data->UpdateModelingArc(id, arc);
-        }
         return;
     }
 }
 
 void VDomDocument::FullUpdateTree(){
     VMainGraphicsScene *scene = new VMainGraphicsScene();
+    Q_CHECK_PTR(scene);
     data->ClearObject();
     Parse(Document::LiteParse, scene, scene);
     delete scene;
@@ -843,6 +872,7 @@ void VDomDocument::setCurrentData(){
 
 void VDomDocument::GarbageCollector(){
     const QMap<qint64, VPointF> *points = data->DataPoints();
+    Q_CHECK_PTR(points);
     QMapIterator<qint64, VPointF> p(*points);
     while (p.hasNext()) {
         p.next();
@@ -860,6 +890,7 @@ void VDomDocument::GarbageCollector(){
     }
 
     const QMap<qint64, VArc> *arc = data->DataArcs();
+    Q_CHECK_PTR(arc);
     QMapIterator<qint64, VArc> a(*arc);
     while (a.hasNext()) {
         a.next();
@@ -877,6 +908,7 @@ void VDomDocument::GarbageCollector(){
     }
 
     const QMap<qint64, VSpline> *spl = data->DataSplines();
+    Q_CHECK_PTR(spl);
     QMapIterator<qint64, VSpline> s(*spl);
     while (s.hasNext()) {
         s.next();
@@ -894,6 +926,7 @@ void VDomDocument::GarbageCollector(){
     }
 
     const QMap<qint64, VSplinePath> *splPath = data->DataSplinePaths();
+    Q_CHECK_PTR(splPath);
     QMapIterator<qint64, VSplinePath> q(*splPath);
     while (q.hasNext()) {
         q.next();
@@ -912,15 +945,15 @@ void VDomDocument::GarbageCollector(){
 }
 
 void VDomDocument::AddTool(const qint64 &id, VDataTool *tool){
+    Q_ASSERT_X(id > 0, Q_FUNC_INFO, "id <= 0");
+    Q_CHECK_PTR(tool);
     tools.insert(id, tool);
 }
 
 void VDomDocument::UpdateToolData(const qint64 &id, VContainer *data){
+    Q_ASSERT_X(id > 0, Q_FUNC_INFO, "id <= 0");
+    Q_CHECK_PTR(data);
     VDataTool *tool = tools.value(id);
-    if(tool != 0){
+    Q_CHECK_PTR(tool);
     tool->VDataTool::setData(data);
-    } else {
-        qWarning()<<"Can't find tool with id ="<< id<<".";
 }
-}
-

xml/vdomdocument.h

@@ -92,6 +92,10 @@ private:
     void        ParseArcElement(VMainGraphicsScene *scene, const QDomElement& domElement,
                                 Document::Enum parse, const QString& type, Draw::Mode mode);
     void        ParseIncrementsElement(const QDomNode& node);
+    qint64      GetParametrId(const QDomElement& domElement) const;
+    qint64      GetParametrLongLong(const QDomElement& domElement, const QString &name) const;
+    QString     GetParametrString(const QDomElement& domElement, const QString &name) const;
+    qreal       GetParametrDouble(const QDomElement& domElement, const QString &name) const;
 };
 
 #pragma GCC diagnostic pop