Lupdate.

share/translations/measurements_p0_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p10_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p11_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p12_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p13_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p14_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p15_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p16_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p17_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p18_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p19_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p1_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p20_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p21_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p22_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p23_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p24_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p25_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p26_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p27_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p28_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p29_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p2_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p30_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p31_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p32_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p33_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p34_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p35_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p36_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p37_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p38_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p39_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p3_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p40_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p41_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p42_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p43_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p44_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p45_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p46_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p47_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p48_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p49_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p4_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p50_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p51_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p52_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p53_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p54_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p5_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p6_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p7_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p8_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p998_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/measurements_p9_cs_CZ.ts

@@ -3005,7 +3005,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1506"/>
         <source>neck_side_to_armfold_f</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vpředu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1508"/>
@@ -3059,7 +3059,7 @@
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1527"/>
         <source>neck_side_to_armfold_b</source>
         <comment>Name in a formula. Don&apos;t use math symbols and space in name!!!!</comment>
-        <translation type="unfinished"></translation>
+        <translation>krk_strana_po_podpaží_vzadu</translation>
     </message>
     <message>
         <location filename="../../src/libs/vpatterndb/vtranslatemeasurements.cpp" line="1529"/>

share/translations/valentina_en_CA.ts

@@ -13820,10 +13820,6 @@ Do you want to save your changes?</translation>
         <source>Error replacing a symlink by real file: %1.</source>
         <translation type="vanished">Error replacing a symlink by real file: %1.</translation>
     </message>
-    <message>
-        <source>Error openning a temp file: %1.</source>
-        <translation type="vanished">Error openning a temp file: %1.</translation>
-    </message>
     <message>
         <source>Invalid version. Minimum supported format version is %1</source>
         <translation type="unfinished"></translation>

share/translations/valentina_en_IN.ts

@@ -13820,10 +13820,6 @@ Do you want to save your changes?</translation>
         <source>Error replacing a symlink by real file: %1.</source>
         <translation type="vanished">Error replacing a symlink by real file: %1.</translation>
     </message>
-    <message>
-        <source>Error openning a temp file: %1.</source>
-        <translation type="vanished">Error openning a temp file: %1.</translation>
-    </message>
     <message>
         <source>Invalid version. Minimum supported format version is %1</source>
         <translation type="unfinished"></translation>

share/translations/valentina_en_US.ts

@@ -13820,10 +13820,6 @@ Do you want to save your changes?</translation>
         <source>Error replacing a symlink by real file: %1.</source>
         <translation type="vanished">Error replacing a symlink by real file: %1.</translation>
     </message>
-    <message>
-        <source>Error openning a temp file: %1.</source>
-        <translation type="vanished">Error openning a temp file: %1.</translation>
-    </message>
     <message>
         <source>Invalid version. Minimum supported format version is %1</source>
         <translation type="unfinished"></translation>

share/translations/valentina_es_ES.ts

@@ -2848,10 +2848,6 @@
         <source>Flipping by axis</source>
         <translation>Volteando por ejes</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Habilitar para crear un grupo de visibilidad a partir de objetos originales</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Grupo de Visibilidad</translation>
@@ -2971,10 +2967,6 @@
         <source>Flipping by line</source>
         <translation>Volteando por linea</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Habilitar para crear un grupo de visibilidad a partir de objetos originales</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Grupo de Visibilidad</translation>
@@ -4622,10 +4614,6 @@ Aplicar características de todos modos?</translation>
         <source>Center point</source>
         <translation>Punto central</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Habilitar para crear un grupo de visibilidad a partir de objetos originales</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Grupo de Visibilidad</translation>
@@ -6492,10 +6480,6 @@ Aplicar características de todos modos?</translation>
         <source>This point cannot be origin point. Please, select another origin point</source>
         <translation>Este punto no puede ser punto de origen. Por favor, seleccione otro punto de origen</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Habilitar para crear un grupo de visibilidad a partir de objetos originales</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Grupo de Visibilidad</translation>
@@ -12594,22 +12578,6 @@ Quieres guardar los cambios?</translation>
         <source>Import from CSV</source>
         <translation>Importar desde CSV</translation>
     </message>
-    <message>
-        <source>Measurement name in is empty.</source>
-        <translation type="vanished">El nombre de la medida esta vacío.</translation>
-    </message>
-    <message>
-        <source>Merasurement &apos;%1&apos; doesn&apos;t match regex pattern.</source>
-        <translation type="vanished">La medida &apos;%1&apos; no concuerda con expresiones regulares del patrón.</translation>
-    </message>
-    <message>
-        <source>Merasurement &apos;%1&apos; already used in file.</source>
-        <translation type="vanished">La medida &apos;%1&apos; ya fue usada en el archivo.</translation>
-    </message>
-    <message>
-        <source>Measurement &apos;%1&apos; is not one of known measurements.</source>
-        <translation type="vanished">La medida &apos;%1&apos; no es una de las medidas conocidas.</translation>
-    </message>
     <message>
         <source>Individual measurements require at least 2 columns.</source>
         <translation>Las medidas individuales requiere al menos 2 columnas.</translation>
@@ -12626,10 +12594,6 @@ Quieres guardar los cambios?</translation>
         <source>Imported file must not contain the same name twice.</source>
         <translation>Los archivos importados no deben contener el mismo nombre dos veces.</translation>
     </message>
-    <message>
-        <source>Error in row %1. Measurement name is empty.</source>
-        <translation type="vanished">Error en línea %1. El nombre de la medida esta vacío.</translation>
-    </message>
     <message>
         <source>Cannot save settings. Access denied.</source>
         <translation>No se puede guardar configuración. Acceso denegado.</translation>
@@ -13860,10 +13824,6 @@ Quieres guardar los cambios?</translation>
         <source>Error replacing a symlink by real file: %1.</source>
         <translation type="vanished">Error al reemplazar un acceso directo por archivo real: %1.</translation>
     </message>
-    <message>
-        <source>Error openning a temp file: %1.</source>
-        <translation type="vanished">Error abriendo archivo temporal: %1.</translation>
-    </message>
     <message>
         <source>Invalid version. Minimum supported format version is %1</source>
         <translation>Versión invalida. La versión de formato mínimo admitido es %1</translation>
@@ -13989,10 +13949,6 @@ Quieres guardar los cambios?</translation>
         <source>Export to CSV</source>
         <translation>Exportar a CSV</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">¿Quieres cambiar los permisos?</translation>
-    </message>
     <message>
         <source>Cannot set permissions for %1 to writable.</source>
         <translation>No se pueden establecer permisos para %1 para escribir.</translation>
@@ -14310,18 +14266,6 @@ Quieres guardar los cambios?</translation>
 </context>
 <context>
     <name>VBank</name>
-    <message>
-        <source>Preparing data for layout error: Detail &apos;%1&apos; square &lt;= 0</source>
-        <translation type="vanished">Preparación de datos para error de diseño: Detalle &apos;%1&apos; cuadro &lt;= 0</translation>
-    </message>
-    <message>
-        <source>Preparing data for layout error: Layout paper sheet &lt;= 0</source>
-        <translation type="vanished">Preparación de datos para el error de diseño: Hoja de papel del diseño &lt;= 0</translation>
-    </message>
-    <message>
-        <source>Preparing data for layout error: List of details is empty</source>
-        <translation type="vanished">Preparación de datos para el error de diseño: la lista de detalles está vacía</translation>
-    </message>
     <message>
         <source>Error of preparing data for layout: Detail &apos;%1&apos; square &lt;= 0</source>
         <translation type="unfinished"></translation>
@@ -14700,10 +14644,6 @@ Quieres guardar los cambios?</translation>
         <source>Number corresponding to layout page template (default = 0, export mode):</source>
         <translation>Numero correspondiente a la plantilla de la pagina de diseño (predeterminado = 0, modo exportación):</translation>
     </message>
-    <message>
-        <source>Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself.</source>
-        <translation type="vanished">Ignore los márgenes de la impresora (modo exportación). Use si necesita espacio en papel completo. En caso de impresión posterior deberá considerar por los márgenes el mismo.</translation>
-    </message>
     <message>
         <source>Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format):</source>
         <translation>Numero correspondiente a la plantilla de la pagina de mosaico pdf ( predeterminado = 0, modo exportacion con formato mosaico pdf):</translation>
@@ -14900,10 +14840,6 @@ Quieres guardar los cambios?</translation>
         <source>The filename of layout file</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Load pattern pieces form the raw layout data file.</source>
-        <translation type="vanished">Cargue piezas de patrón desde el archivo de datos de diseño sin procesar.</translation>
-    </message>
     <message>
         <source>The raw layout data file</source>
         <translation type="unfinished"></translation>
@@ -15529,14 +15465,6 @@ Quieres guardar los cambios?</translation>
         <source>Can&apos;t begin to listen for incoming connections on name &apos;%1&apos;</source>
         <translation>No se puede comenzar a escuchar por conexiones entrantes en el nombre &apos;%1&apos;</translation>
     </message>
-    <message>
-        <source>Export mode doesn&apos;t support openning several files.</source>
-        <translation type="vanished">El modo de exportación no admite la apertura de varios archivos.</translation>
-    </message>
-    <message>
-        <source>Import raw layout data does not support openning several layout files.</source>
-        <translation type="vanished">Importar datos de diseño sin procesar no admite la apertura de varios archivos de diseño.</translation>
-    </message>
     <message>
         <source>Please, provide one input file.</source>
         <translation>Por favor, proporcione un archivo de entrada.</translation>
@@ -16628,10 +16556,6 @@ Do you want to save your changes?</source>
         <source>Error creating or updating pin point</source>
         <translation>Error creando o actualizando punto anclaje</translation>
     </message>
-    <message>
-        <source>Error creating or updating place lavel</source>
-        <translation type="vanished">Error creando o actualizando etiqueta de lugar</translation>
-    </message>
     <message>
         <source>Piece path doesn&apos;t contain nodes</source>
         <translation>La ruta de acceso de la pieza no contiene nodos</translation>
@@ -20059,10 +19983,6 @@ Quiere guardar los cambios?</translation>
         <source>Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption).</source>
         <translation>Ocurrió un error desconocido, por ejemplo una partición llena evitando que se escriba el archivo de bloqueo. Ignorelo si desea continuar (no se recomienda, puede causar corrupción de datos).</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">¿Quieres cambiar los permisos?</translation>
-    </message>
     <message>
         <source>Color</source>
         <translation>Color</translation>

share/translations/valentina_fr_FR.ts

@@ -2848,10 +2848,6 @@
         <source>Flipping by axis</source>
         <translation>Symétrie axiale</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Activer pour créer un groupe de visibilité à partir des objets d&apos;origine</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Groupe de visibilité</translation>
@@ -2971,10 +2967,6 @@
         <source>Flipping by line</source>
         <translation>Symétrie par rapport à une ligne</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Activer pour créer un groupe de visibilité à partir des objets d&apos;origine</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Groupe de visibilité</translation>
@@ -4620,10 +4612,6 @@ Appliquer quand même les réglages ?</translation>
         <source>Center point</source>
         <translation>Point central</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Activer pour créer un groupe de visibilité à partir des objets d&apos;origine</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Groupe de visibilité</translation>
@@ -6490,10 +6478,6 @@ Appliquer quand même les réglages ?</translation>
         <source>This point cannot be origin point. Please, select another origin point</source>
         <translation>Ce point ne peut pas être le point de départ. Sélectionner un autre point de départ</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Activer pour créer un groupe de visibilité à partir des objets d&apos;origine</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Groupe de visibilité</translation>
@@ -12581,18 +12565,6 @@ Voulez-vous enregistrer les changements?</translation>
         <source>Import from CSV</source>
         <translation>Importer depuis un CSV</translation>
     </message>
-    <message>
-        <source>Measurement name in is empty.</source>
-        <translation type="vanished">Le nom de la mesure est vide.</translation>
-    </message>
-    <message>
-        <source>Merasurement &apos;%1&apos; already used in file.</source>
-        <translation type="vanished">Mesure &apos;%1&apos; déjà utilisée dans le fichier.</translation>
-    </message>
-    <message>
-        <source>Measurement &apos;%1&apos; is not one of known measurements.</source>
-        <translation type="vanished">La mesure &apos;%1&apos; n&apos;est pas une des mesures connues. </translation>
-    </message>
     <message>
         <source>Individual measurements require at least 2 columns.</source>
         <translation>Les mesures individuelles nécessitent au moins 2 colonnes.</translation>
@@ -13959,10 +13931,6 @@ Voulez-vous enregistrer les changements?</translation>
         <source>Export to CSV</source>
         <translation>Exporter vers CVS</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">Voulez-vous modifier les autorisations?</translation>
-    </message>
     <message>
         <source>Cannot set permissions for %1 to writable.</source>
         <translation type="unfinished"></translation>
@@ -19974,10 +19942,6 @@ Do you want to save your changes?</source>
         <source>Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption).</source>
         <translation>Une erreur inconnue s&apos;est produite, par exemple une partition pleine empêche d&apos;écrire le fichier verrouillé. Ignorer pour continuer (déconseillé car pouvant causer une corruption de données).</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">Voulez-vous modifier les autorisations?</translation>
-    </message>
     <message>
         <source>Color</source>
         <translation>Couleur</translation>

share/translations/valentina_it_IT.ts

@@ -2840,10 +2840,6 @@
         <source>Flipping by axis</source>
         <translation>Ruotare sull&apos;asse</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Seleziona per creare un Gruppo di Visibilità degli oggetti iniziali</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Gruppo di Visibilità</translation>
@@ -2963,10 +2959,6 @@
         <source>Flipping by line</source>
         <translation>Ruota sulla linea</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Seleziona per creare un Gruppo di Visibilità degli oggetti iniziali</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Gruppo di Visibilità</translation>
@@ -4615,10 +4607,6 @@ Applicare la configurazione comunque?</translation>
         <source>Center point</source>
         <translation>Punto centrale</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Seleziona per creare un Gruppo di Visibilità degli oggetti iniziali</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Gruppo di Visibilità</translation>
@@ -6485,10 +6473,6 @@ Applicare la configurazione comunque?</translation>
         <source>This point cannot be origin point. Please, select another origin point</source>
         <translation>Questo non può essere il punto di origine. Selezionane un altro, grazie</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Seleziona per creare un Gruppo di Visibilità degli oggetti iniziali</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Gruppo di Visibilità</translation>
@@ -12582,10 +12566,6 @@ Vuoi salvare le tue modifiche?</translation>
         <source>Import from CSV</source>
         <translation>Importa da CSV</translation>
     </message>
-    <message>
-        <source>Measurement name in is empty.</source>
-        <translation type="vanished">Nome della misura mancante.</translation>
-    </message>
     <message>
         <source>Individual measurements require at least 2 columns.</source>
         <translation type="unfinished"></translation>
@@ -12602,10 +12582,6 @@ Vuoi salvare le tue modifiche?</translation>
         <source>Imported file must not contain the same name twice.</source>
         <translation type="unfinished"></translation>
     </message>
-    <message>
-        <source>Error in row %1. Measurement name is empty.</source>
-        <translation type="vanished">Errore nella riga %1. Nome misura mancante.</translation>
-    </message>
     <message>
         <source>Cannot save settings. Access denied.</source>
         <translation>Impossibile salvare le configurazioni. Accesso negato.</translation>

share/translations/valentina_nl_NL.ts

@@ -2848,10 +2848,6 @@
         <source>Flipping by axis</source>
         <translation>Kantelen via de aslijn</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Zet aan om een zichtbaarheidsgroep aan te maken vanuit de originele objecten</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Zichtbaarheid groep</translation>
@@ -2971,10 +2967,6 @@
         <source>Flipping by line</source>
         <translation>Kantelen via de lijn</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Zet aan om een zichtbaarheidsgroep aan te maken vanuit de originele objecten</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Zichtbaarheid groep</translation>
@@ -4623,10 +4615,6 @@ Toch de instellingen aanpassen?</translation>
         <source>Center point</source>
         <translation>Middelpunt</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Zet aan om een zichtbaarheidsgroep aan te maken vanuit de originele objecten</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Zichtbaarheid groep</translation>
@@ -6493,10 +6481,6 @@ Toch de instellingen aanpassen?</translation>
         <source>This point cannot be origin point. Please, select another origin point</source>
         <translation>Dit punt kan geen startpunt zijn.  Gelieve een ander startpunt te kiezen</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Zet aan om een zichtbaarheidsgroep aan te maken vanuit de originele objecten</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Zichtbaarheid groep</translation>
@@ -12593,22 +12577,6 @@ Wil je deze veranderingen opslaan?</translation>
         <source>Import from CSV</source>
         <translation>Importeer van CSV</translation>
     </message>
-    <message>
-        <source>Measurement name in is empty.</source>
-        <translation type="vanished">De maten naam is leeg.</translation>
-    </message>
-    <message>
-        <source>Merasurement &apos;%1&apos; doesn&apos;t match regex pattern.</source>
-        <translation type="vanished">Maat &apos;%1&apos; voldoet niet aan regex patroon.</translation>
-    </message>
-    <message>
-        <source>Merasurement &apos;%1&apos; already used in file.</source>
-        <translation type="vanished">Maat &apos;%1&apos; reeds in gebruin in het bestand.</translation>
-    </message>
-    <message>
-        <source>Measurement &apos;%1&apos; is not one of known measurements.</source>
-        <translation type="vanished">Maat &apos;%1&apos; is geen van de gekende maten.</translation>
-    </message>
     <message>
         <source>Individual measurements require at least 2 columns.</source>
         <translation>Individuele maten vereisen ten minste 2 kolommen.</translation>
@@ -12625,10 +12593,6 @@ Wil je deze veranderingen opslaan?</translation>
         <source>Imported file must not contain the same name twice.</source>
         <translation>Geïmporteerd bestand mag geen tweemaal dezelfde naam bevatten.</translation>
     </message>
-    <message>
-        <source>Error in row %1. Measurement name is empty.</source>
-        <translation type="vanished">Fout in rij %1. maten naam is leeg.</translation>
-    </message>
     <message>
         <source>Cannot save settings. Access denied.</source>
         <translation>Kan instellingen niet opslaan. Toegang geweigerd.</translation>
@@ -13859,10 +13823,6 @@ Wil je deze veranderingen opslaan?</translation>
         <source>Error replacing a symlink by real file: %1.</source>
         <translation type="vanished">Fout bij het herplaatsen van een symlink van een bestaand bestand: %1.</translation>
     </message>
-    <message>
-        <source>Error openning a temp file: %1.</source>
-        <translation type="vanished">Fout bij het openen van een tijdelijk bestand: %1.</translation>
-    </message>
     <message>
         <source>Invalid version. Minimum supported format version is %1</source>
         <translation>Ongeldige versie. Minimaal ondersteund formaat is %1</translation>
@@ -13988,10 +13948,6 @@ Wil je deze veranderingen opslaan?</translation>
         <source>Export to CSV</source>
         <translation>Exporteer naar CSV</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">Wens je de rechten te veranderen?</translation>
-    </message>
     <message>
         <source>Cannot set permissions for %1 to writable.</source>
         <translation>Kan geen schrijftoestemming geven voor %1.</translation>
@@ -14309,18 +14265,6 @@ Wil je deze veranderingen opslaan?</translation>
 </context>
 <context>
     <name>VBank</name>
-    <message>
-        <source>Preparing data for layout error: Detail &apos;%1&apos; square &lt;= 0</source>
-        <translation type="vanished">Fout bij het voorbereiden van gegevens voor lay-out: Detail &apos;%1&apos; vierkant &lt;= 0</translation>
-    </message>
-    <message>
-        <source>Preparing data for layout error: Layout paper sheet &lt;= 0</source>
-        <translation type="vanished">Fout bij het voorbereiden van gegevens voor lay-out: Lay-out blad papier &lt;=0</translation>
-    </message>
-    <message>
-        <source>Preparing data for layout error: List of details is empty</source>
-        <translation type="vanished">Fout bij het voorbereiden van gegevens voor lay-out: Detail lijst is leeg</translation>
-    </message>
     <message>
         <source>Error of preparing data for layout: Detail &apos;%1&apos; square &lt;= 0</source>
         <translation type="unfinished"></translation>
@@ -14699,10 +14643,6 @@ Wil je deze veranderingen opslaan?</translation>
         <source>Number corresponding to layout page template (default = 0, export mode):</source>
         <translation>Waarde die overeenkomt met het sjabloon van de opmaak pagina (standaard=0, export modus):</translation>
     </message>
-    <message>
-        <source>Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself.</source>
-        <translation type="vanished">Negeer de printer marges (export modus). Gebruik indien nodig de volledige pagina. In het geval van uitprinten moet je zelf met de marges rekening houden.</translation>
-    </message>
     <message>
         <source>Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format):</source>
         <translation>Waarde die overeenkomt met het gestapelde PDF sjabloon (standaard = 0, export modus met gestapeld PDF formaat):</translation>
@@ -16614,10 +16554,6 @@ Do you want to save your changes?</source>
         <source>Error creating or updating pin point</source>
         <translation>Fout bij het maken of bijwerken van een pin punt</translation>
     </message>
-    <message>
-        <source>Error creating or updating place lavel</source>
-        <translation type="vanished">Fout bij het aanmaken of bijwerken van de plaats niveau</translation>
-    </message>
     <message>
         <source>Piece path doesn&apos;t contain nodes</source>
         <translation>Patroondeel pad bevat geen knooppunten</translation>
@@ -20045,10 +19981,6 @@ Deze wijziging opslaan?</translation>
         <source>Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption).</source>
         <translation>Onbekende fout gebeurd, bijvoorbeeld een volledige partitie voorkomt het schrijven uit het vergrendelingsbestand. Negeren als u wilt doorgaan (niet aanbevolen, kan leiden tot gegevensbeschadiging).</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">Wens je de rechten te veranderen?</translation>
-    </message>
     <message>
         <source>Color</source>
         <translation>Kleur</translation>

share/translations/valentina_pt_BR.ts

@@ -2848,10 +2848,6 @@
         <source>Flipping by axis</source>
         <translation>Espelhar através do eixo</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Habilite para criar um grupo de visibilidade com os objetos originais</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Grupo de Visibilidade</translation>
@@ -2971,10 +2967,6 @@
         <source>Flipping by line</source>
         <translation>Espelhar através de linha</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Habilite para criar um grupo de visibilidade com os objetos originais</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Grupo de Visibilidade</translation>
@@ -4623,10 +4615,6 @@ Aplicar configurações de qualquer forma?</translation>
         <source>Center point</source>
         <translation>Ponto central</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Habilite para criar um grupo de visibilidade com os objetos originais</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Grupo de Visibilidade</translation>
@@ -6493,10 +6481,6 @@ Aplicar configurações de qualquer forma?</translation>
         <source>This point cannot be origin point. Please, select another origin point</source>
         <translation>Este ponto não pode ser o ponto de origem. Por favor, selecione outro ponto de origem</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Habilite para criar um grupo de visibilidade com os objetos originais</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Grupo de Visibilidade</translation>
@@ -12590,22 +12574,6 @@ Deseja salvar suas mudanças?</translation>
         <source>Import from CSV</source>
         <translation>Importar de CSV</translation>
     </message>
-    <message>
-        <source>Measurement name in is empty.</source>
-        <translation type="vanished">O nome da medida está vazio.</translation>
-    </message>
-    <message>
-        <source>Merasurement &apos;%1&apos; doesn&apos;t match regex pattern.</source>
-        <translation type="vanished">Medida &apos;%1&apos; não corresponde ao padrão regex.</translation>
-    </message>
-    <message>
-        <source>Merasurement &apos;%1&apos; already used in file.</source>
-        <translation type="vanished">Medida &apos;%1&apos; já utilizada no arquivo.</translation>
-    </message>
-    <message>
-        <source>Measurement &apos;%1&apos; is not one of known measurements.</source>
-        <translation type="vanished">Medida &apos;%1&apos; não é uma das medidas conhecidas.</translation>
-    </message>
     <message>
         <source>Individual measurements require at least 2 columns.</source>
         <translation>As medidas individuais necessitam pelo menos 2 colunas.</translation>
@@ -12622,10 +12590,6 @@ Deseja salvar suas mudanças?</translation>
         <source>Imported file must not contain the same name twice.</source>
         <translation>O arquivo importado não poderá conter duas vezes o mesmo nome.</translation>
     </message>
-    <message>
-        <source>Error in row %1. Measurement name is empty.</source>
-        <translation type="vanished">Erro na linha %1. O nome da medida está vazio.</translation>
-    </message>
     <message>
         <source>Cannot save settings. Access denied.</source>
         <translation>Acesso negado. Configuração não pode ser salva.</translation>
@@ -13852,10 +13816,6 @@ Deseja salvar suas mudanças?</translation>
         <source>Unexpected version &quot;%1&quot;.</source>
         <translation>Versão inesperada&quot;%1&quot;.</translation>
     </message>
-    <message>
-        <source>Error openning a temp file: %1.</source>
-        <translation type="vanished">Erro ao abrir arquivo temporário: %1.</translation>
-    </message>
     <message>
         <source>Invalid version. Minimum supported format version is %1</source>
         <translation>Versão inválida. O formato da versão mínima suportado é %1</translation>
@@ -13981,10 +13941,6 @@ Deseja salvar suas mudanças?</translation>
         <source>Export to CSV</source>
         <translation>Exportar para CSV</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">Você quer alterar as permissões?</translation>
-    </message>
     <message>
         <source>Cannot set permissions for %1 to writable.</source>
         <translation>Não é possível definir permissões para %1 para gravável.</translation>
@@ -14648,10 +14604,6 @@ Deseja salvar suas mudanças?</translation>
         <source>Number corresponding to layout page template (default = 0, export mode):</source>
         <translation>Número correspondente ao modelo da página de layout (padrão = 0, modo de exportação):</translation>
     </message>
-    <message>
-        <source>Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself.</source>
-        <translation type="vanished">Ignore as margens de impressão (modo de exportação). Use, se necessário, espaço de papel completo. Em caso de impressão posterior, você deve contabilizar as próprias margens.</translation>
-    </message>
     <message>
         <source>Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format):</source>
         <translation type="unfinished"></translation>
@@ -15217,10 +15169,6 @@ Deseja salvar suas mudanças?</translation>
         <source>Creating file &apos;%1&apos; failed! %2</source>
         <translation>Criação do arquivo &apos;%1&apos; falhou! %2</translation>
     </message>
-    <message>
-        <source>Can&apos;t create an flat dxf file.</source>
-        <translation type="vanished">Impossível criar um arquivo flat dxf.</translation>
-    </message>
     <message>
         <source>Can&apos;t create an AAMA dxf file.</source>
         <translation>Impossível criar um arquivo AAMA dxf.</translation>
@@ -19983,10 +19931,6 @@ Deseja salvar as alterações?</translation>
         <source>Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption).</source>
         <translation>Ocorreu um erro desconhecido, como por exemplo, uma partição cheia impediu a gravação do arquivo bloqueado. Ignore caso deseje continuar (não recomendado, pode causar uma corrupção de dados).</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">Você quer alterar as permissões?</translation>
-    </message>
     <message>
         <source>Color</source>
         <translation>Cor</translation>

share/translations/valentina_uk_UA.ts

@@ -2848,10 +2848,6 @@
         <source>Flipping by axis</source>
         <translation>Відзеркалити по вісі</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Увімкніть створення групи видимості з оригінальних об’єктів</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Група видимості</translation>
@@ -2971,10 +2967,6 @@
         <source>Flipping by line</source>
         <translation>Відзеркалити по лінії</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Увімкніть створення групи видимості з оригінальних об’єктів</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Група видимості</translation>
@@ -4623,10 +4615,6 @@ Apply settings anyway?</source>
         <source>Center point</source>
         <translation>Точка центру</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Увімкніть створення групи видимості з оригінальних об’єктів</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Група видимості</translation>
@@ -6495,10 +6483,6 @@ Apply settings anyway?</source>
         <source>This point cannot be origin point. Please, select another origin point</source>
         <translation>Ця точка може бути вихідною точкою. Будь ласка, виберіть іншу відправну точку операції</translation>
     </message>
-    <message>
-        <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="vanished">Увімкніть створення групи видимості з оригінальних об’єктів</translation>
-    </message>
     <message>
         <source>Visibility Group</source>
         <translation>Група видимості</translation>
@@ -12596,22 +12580,6 @@ Do you want to save your changes?</source>
         <source>Import from CSV</source>
         <translation>Імпорт із CSV</translation>
     </message>
-    <message>
-        <source>Measurement name in is empty.</source>
-        <translation type="vanished">Назва вимірювання порожня.</translation>
-    </message>
-    <message>
-        <source>Merasurement &apos;%1&apos; doesn&apos;t match regex pattern.</source>
-        <translation type="vanished">Вимірювання &quot;%1&quot; не відповідає шаблону регулярного виразу.</translation>
-    </message>
-    <message>
-        <source>Merasurement &apos;%1&apos; already used in file.</source>
-        <translation type="vanished">Вимірювання &quot;%1&quot; вже використовується у файлі.</translation>
-    </message>
-    <message>
-        <source>Measurement &apos;%1&apos; is not one of known measurements.</source>
-        <translation type="vanished">Вимірювання &quot;%1&quot; не є одним із відомих вимірювань.</translation>
-    </message>
     <message>
         <source>Individual measurements require at least 2 columns.</source>
         <translation>Для окремих вимірювань потрібно щонайменше 2 колонки.</translation>
@@ -12628,10 +12596,6 @@ Do you want to save your changes?</source>
         <source>Imported file must not contain the same name twice.</source>
         <translation>Імпортований файл не повинен містити однакову назву двічі.</translation>
     </message>
-    <message>
-        <source>Error in row %1. Measurement name is empty.</source>
-        <translation type="vanished">Помилка в рядку %1. Назва вимірювання порожня.</translation>
-    </message>
     <message>
         <source>Cannot save settings. Access denied.</source>
         <translation>Не вдається зберегти налаштування. Доступ заборонено.</translation>
@@ -13862,10 +13826,6 @@ Do you want to save your changes?</source>
         <source>Error replacing a symlink by real file: %1.</source>
         <translation type="vanished">Помилка заміни символьного посилання на реальний файл: %1.</translation>
     </message>
-    <message>
-        <source>Error openning a temp file: %1.</source>
-        <translation type="vanished">Помилка відкриття тимчасового файлу: %1.</translation>
-    </message>
     <message>
         <source>Invalid version. Minimum supported format version is %1</source>
         <translation>Недійсна версія. Мінімальна підтримувана версія формату %1</translation>
@@ -13990,10 +13950,6 @@ Do you want to save your changes?</source>
         <source>Export to CSV</source>
         <translation>Експортувати до CSV</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">Ви хочете змінити дозволи?</translation>
-    </message>
     <message>
         <source>Cannot set permissions for %1 to writable.</source>
         <translation>Не вдалося встановити права для %1 на запис.</translation>
@@ -14300,10 +14256,6 @@ Do you want to save your changes?</source>
         <source>Content type is empty.</source>
         <translation>Тип вмісту порожній.</translation>
     </message>
-    <message>
-        <source>Content type mistmatch.</source>
-        <translation type="vanished">Невідповідність типу вмісту.</translation>
-    </message>
     <message>
         <source>Not image.</source>
         <translation>Не зображення.</translation>
@@ -14315,18 +14267,6 @@ Do you want to save your changes?</source>
 </context>
 <context>
     <name>VBank</name>
-    <message>
-        <source>Preparing data for layout error: Detail &apos;%1&apos; square &lt;= 0</source>
-        <translation type="vanished">Помилка підготовки даних для розкладки: Деталь &quot;%1&quot; площа &lt;= 0</translation>
-    </message>
-    <message>
-        <source>Preparing data for layout error: Layout paper sheet &lt;= 0</source>
-        <translation type="vanished">Помилка підготовки даних для розкладки: Аркуша паперу розкладки &lt;= 0</translation>
-    </message>
-    <message>
-        <source>Preparing data for layout error: List of details is empty</source>
-        <translation type="vanished">Помилка підготовки даних для розкладки: Список деталей порожній</translation>
-    </message>
     <message>
         <source>Error of preparing data for layout: Detail &apos;%1&apos; square &lt;= 0</source>
         <translation type="unfinished"></translation>
@@ -14705,10 +14645,6 @@ Do you want to save your changes?</source>
         <source>Number corresponding to layout page template (default = 0, export mode):</source>
         <translation>Номер, що відповідає шаблону сторінки розкладки (за замовчуванням = 0, режим експорту):</translation>
     </message>
-    <message>
-        <source>Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself.</source>
-        <translation type="vanished">Ігнорувати поля принтера (режим експорту). Використовуйте, якщо потрібен повний простір канви. У разі подальшого друку ви повинні самі врахувати поля.</translation>
-    </message>
     <message>
         <source>Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format):</source>
         <translation>Номер, що відповідає шаблону сторінки pdf плиткою (за замовчуванням = 0, режим експорту pdf плиткою):</translation>
@@ -14905,10 +14841,6 @@ Do you want to save your changes?</source>
         <source>The filename of layout file</source>
         <translation>Ім&apos;я файлу розкладки</translation>
     </message>
-    <message>
-        <source>Load pattern pieces form the raw layout data file.</source>
-        <translation type="vanished">Завантажити деталі з файлу необроблених даних розкладки.</translation>
-    </message>
     <message>
         <source>The raw layout data file</source>
         <translation>Файл необроблених даних розкладки</translation>
@@ -15289,10 +15221,6 @@ Do you want to save your changes?</source>
         <source>Creating file &apos;%1&apos; failed! %2</source>
         <translation>Створення файлу &apos;%1&apos; не вдалося! %2</translation>
     </message>
-    <message>
-        <source>Can&apos;t create an flat dxf file.</source>
-        <translation type="vanished">Не вдається створити плоский файл dxf.</translation>
-    </message>
     <message>
         <source>Can&apos;t create an AAMA dxf file.</source>
         <translation>Не вдається створити файл AAMA dxf.</translation>
@@ -15537,14 +15465,6 @@ Do you want to save your changes?</source>
         <source>Can&apos;t begin to listen for incoming connections on name &apos;%1&apos;</source>
         <translation>Не вдається почати слухати вхідні з&apos;єднання за іменем &apos;%1&apos;</translation>
     </message>
-    <message>
-        <source>Export mode doesn&apos;t support openning several files.</source>
-        <translation type="vanished">Режим експорту не підтримує відкриття кількох файлів.</translation>
-    </message>
-    <message>
-        <source>Import raw layout data does not support openning several layout files.</source>
-        <translation type="vanished">Імпорт необроблених даних розкладки не підтримує відкриття кількох файлів розкладки.</translation>
-    </message>
     <message>
         <source>Please, provide one input file.</source>
         <translation>Будь ласка, надайте один вхідний файл.</translation>
@@ -16636,10 +16556,6 @@ Do you want to save your changes?</source>
         <source>Error creating or updating pin point</source>
         <translation>Помилка створення чи оновлення точки шпильки</translation>
     </message>
-    <message>
-        <source>Error creating or updating place lavel</source>
-        <translation type="vanished">Помилка створення або оновлення мітки місця</translation>
-    </message>
     <message>
         <source>Piece path doesn&apos;t contain nodes</source>
         <translation>Контур деталі не містить вузлів</translation>
@@ -16682,10 +16598,6 @@ Do you want to save your changes?</source>
         <source>Content type is empty.</source>
         <translation>Тип вмісту порожній.</translation>
     </message>
-    <message>
-        <source>Content type mistmatch.</source>
-        <translation type="vanished">Невідповідність типу вмісту.</translation>
-    </message>
     <message>
         <source>Not image.</source>
         <translation>Не зображення.</translation>
@@ -20072,10 +19984,6 @@ Do you want to save your changes?</source>
         <source>Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption).</source>
         <translation>Сталася невідома помилка, наприклад переповнення розділу попередило запис lock файлу. Ігноруйте якщо бажаєте продовжити (не рекомендується, може призвести до втрати даних).</translation>
     </message>
-    <message>
-        <source>Do you want to change the premissions?</source>
-        <translation type="vanished">Ви хочете змінити дозволи?</translation>
-    </message>
     <message>
         <source>Color</source>
         <translation>Колір</translation>