AddGroup add group AddItemToGroup Add item to group AddPatternPiece add pattern piece %1 AddPiece add detail AddToCalc add object ChangeGroupOptions rename group ChangeGroupVisibility change group visibility ChangeMultipleGroupsVisibility change multiple groups visibility CommunityPage Server שרת Server name/IP שם שרת/IP ConfigurationPage Save שמור Centimeters סנטימטרים Millimiters מילימטר DelGroup delete group DelTool delete tool DeletePatternPiece delete pattern piece %1 DeletePiece delete tool DialogAboutApp About Valentina Valentina version Contributors Web site : %1 Cannot open your default browser Build revision: Built on %1 at %2 Check For Updates DialogAboutTape About Tape Tape version Build revision: This program is part of Valentina project. Build revision: %1 Web site : %1 Cannot open your default browser Built on %1 at %2 Check For Updates DialogAlongLine Length אורך Value of length ערך האורך <html><head/><body>Show full calculation in message box</body></html> Point label תווית הנקודה First point נקודה ראשונה First point of line נקודה ראשונה בקו Second point נקודה שנייה Second point of line נקודה שנייה בקו Type of line סוג הקו Select second point of line Point at distance along line Edit length Length: Formula wizard Value Calculation Point label: First point: First point of the line Second point: Second point of the line Type of line: Line color: Unique label Choose unique label. Tool כלי Notes DialogArc Arc Radius רדיוס Value of radius ערך הרדיוס <html><head/><body>Show full calculation in message box</body></html> Center point נקודת מרכז Error Radius can't be negative Edit radius Edit first angle Edit second angle Radius: Formula wizard Value First angle: Calculation Second angle: Center point: Select center point of the arc Color: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Tool כלי Alias: Notes DialogArcWithLength Dialog Radius רדיוס Value of radius ערך הרדיוס <html><head/><body>Show full calculation in message box</body></html> Length אורך Center point נקודת מרכז Edit radius Edit the first angle Edit the arc length Radius: Formula wizard Value Calculation First angle: Length: Center point: Color: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Tool כלי Alias: Notes DialogBisector Length אורך Value of length ערך האורך <html><head/><body>Show full calculation in message box</body></html> Point label תווית הנקודה First point נקודה ראשונה Second point נקודה שנייה Type of line סוג הקו Select second point of angle Select third point of angle Point along bisector Edit length Length: Formula wizard Value Calculation Point label: Unique label Choose unique label. First point: Second point: Third point: Type of line: Line color: Tool כלי Notes DialogCubicBezier Color: Name: First point: Second point: Third point: Fourth point: Select the second point of curve Select the third point of curve Select the fourth point of curve Invalid spline Tool cubic bezier Pen Style: Approximation Scale: Set approximation scale for this curve, 0 - use global value Tool כלי Alias: Notes DialogCubicBezierPath Point: List of points Color: Name: Invalid spline path Tool cubic bezier path Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Cannot find point with id %1 Tool כלי Alias: Notes DialogCurveIntersectAxis <html><head/><body>Show full calculation in message box</body></html> Curve עקומה Point label תווית הנקודה Type of line סוג הקו Select axis point Point intersect curve and axis Edit angle Angle: Formula wizard Value Calculation Axis point: Curve: Point label: Unique label Choose unique label. Type of line: Line color: Tool כלי Notes DialogCutArc Length אורך Value of length ערך האורך <html><head/><body>Show full calculation in message box</body></html> Point label תווית הנקודה Segment an arc Edit length Length: Formula wizard Value Calculation Arc: Point label: Unique label Choose unique label. Tool כלי Alias1: Alias2: Notes DialogCutSpline Length אורך Value of length ערך האורך <html><head/><body>Show full calculation in message box</body></html> Curve עקומה Point label תווית הנקודה Segmenting a simple curve Edit length Length: Formula wizard Value Calculation Curve: Point label: Unique label Choose unique label. Tool כלי Alias1: Alias2: Notes DialogCutSplinePath Length אורך Value of length ערך האורך <html><head/><body>Show full calculation in message box</body></html> Curve עקומה Point label תווית הנקודה Segment a curved path Edit length Length: Formula wizard Value Calculation Curve: Point label: Unique label Choose unique label. Tool כלי Alias1: Alias2: Notes DialogDateTimeFormats Label date time editor Format: Insert a format <empty> DialogDetail Options אפשרויות Width רוחב Delete למחוק ... ... DialogDimensionLabels Dimension labels Dimension: Value Label DialogDuplicateDetail Dialog duplicate detail Click to place duplicate DialogEditLabel Edit label template Clear current and begin new label Import from label template Export label as template Edit Bold Font formating Italic Font formating Aligns with the left edge Centers horizontally in the available space Aligns with the right edge Additional font size. Use to make a line bigger. Text: Line of text Insert placeholders Preview <empty> Create new template Creating new template will overwrite the current, do you want to continue? Label template Export label template template Could not save file Import template Import template will overwrite the current, do you want to continue? File error. Date Time Pattern name Pattern number Company name or designer name Customer name Pattern extension Pattern file name Measurments file name Measurments extension Piece letter Piece annotation Piece orientation Piece rotation Piece tilt Piece fold position Piece name Quantity Material: Fabric Fabric Material: Lining Lining Material: Interfacing Interfacing Material: Interlining Interlining Word: Cut Cut Word: on fold on fold User material Insert… Move on top Move up Move down Move on bottom Measurements units Pattern units Size units Customer birth date Customer email Height dimension Size dimension Hip dimension Waist dimension Measurement: %1 Height label dimension Size label dimension Hip label dimension Waist label dimension DialogEditWrongFormula Edit formula Insert variable into formula Input data Measurements Increments Length of lines אורך הקווים Length of curves אורך העקומות Angle of lines Hide empty measurements Line length אורך הקו Curve length אורך העקומה Line Angle Radius of arcs Angles of curves Arc radius Curve angle Formula: Value Calculation Name Full name Functions Lengths to control points Filter list by keyword Preview calculations DialogEllipticalArc Radius1: Formula wizard Value Calulation <html><head/><body>Show full calculation in message box</body></html> Radius2: First angle: Calculation Second angle: Rotation angle: Center point: Select center point of the arc Color: Edit radius1 Edit radius2 Edit first angle Edit second angle Edit rotation angle Elliptical arc Pen style: Tool כלי Alias: Notes DialogEndLine Length אורך Value of length ערך האורך <html><head/><body>Show full calculation in message box</body></html> First point of line נקודה ראשונה בשורה Point label תווית הנקודה Type of line סוג הקו Point at distance and angle Edit angle Edit length Length: Formula wizard Value Calculation Angle: Base point: Point label: Unique label Choose unique label. Type of line: Line color: Tool כלי Notes DialogExportToCSV With header Codec: Separator Tab Comma Semicolon Space Options אפשרויות Preview Global Options DialogFinalMeasurements Final measurements Find: Search Name The calculated value הערך המחושב Formula Details Name: Calculated value: Formula: Calculation <html><head/><body>Show full calculation in message box</body></html> Formula wizard Description: Move measurement up Move measurement down measurement Error Empty field. Edit measurement Empty field Invalid result. Value is infinite or NaN. Please, check your calculations. Value Parser error: %1 <html><head/><body>Search final measurements by term. Prepend "/r/" to the front of the search string to search final measurements by regex.</body></html> DialogFlippingByAxis Origin point: Suffix: Axis type: Select origin point Select origin point that is not part of the list of objects Vertical axis Horizontal axis Flipping by axis Enable to create a visibility gropup from original objects Visibility Group Name: Rotation Tags: Separate each tag with comma. Add tags Tool כלי Alias: Pen style: Color: Ready Notes Invalid suffix Invalid group name Label: Default Invalid point Invalid label Invalid alias DialogFlippingByLine First line point: Suffix: Second line point: Select first line point Select first line point that is not part of the list of objects Select second line point Select second line point that is not part of the list of objects Flipping by line Enable to create a visibility gropup from original objects Visibility Group Name: Rotation Tags: Separate each tag with comma. Add tags Tool כלי Alias: Pen style: Color: Ready Notes Invalid suffix Invalid group name Label: Default Invalid line points Invalid first line point Invalid second line point Invalid label Invalid alias DialogGroup Group Group name: Choose group name New group Tags: Separate each tag with comma. Add tags DialogHeight Point label תווית הנקודה First point of line נקודה ראשונה בשורה Second point of line נקודה שנייה בשורה Type of line סוג הקו Select first point of line לבחור נקודה ראשונה Select second point of line Perpendicular point along line Point label: Unique label Choose unique label. Base point: First point of line: Second point of line: Type of line: Line color: Tool כלי Notes DialogHistory History Tool כלי %1 - Base point %1_%2 - Line from point %1 to point %2 %3 - Point along line %1_%2 %1 - Point of shoulder %3 - normal to line %1_%2 %4 - bisector of angle %1_%2_%3 %5 - intersection of lines %1_%2 and %3_%4 %4 - point of contact of arc with the center in point %1 and line %2_%3 Point of perpendicular from point %1 to line %2_%3 Triangle: axis %1_%2, points %3 and %4 %1 - point of intersection %2 and %3 %1 - point of intersection line %2_%3 and axis through point %4 %1 - point of intersection curve and axis through point %2 %1 - point of arcs intersection %1 - point of circles intersection %1 - point from circle and tangent %1 - point from arc and tangent Correction the dart %1_%2_%3 %1 - point of curves intersection Curve עקומה Cubic bezier curve Arc %1 with length %2 Spline path Cubic bezier curve path %1 - cut %2 arc curve curve path Elliptical arc Rotate objects around point %1. Suffix '%2' Flipping by line %1_%2. Suffix '%3' Flipping by axis through %1 point. Suffix '%2' Move objects. Suffix '%1' DialogIncrements Increments Name The calculated value הערך המחושב Lines קווים Line קו Length אורך Curve עקומה Arc Tables of Variables Lines angles Angle Lengths curves Angles curves Radiuses arcs Radius רדיוס Formula Details Move measurement up Move measurement down Name: Calculated value: Formula: <html><head/><body>Show full calculation in message box</body></html> Description: Error Empty field. Empty field Value Parser error: %1 Edit increment Unique increment name Calculation Formula wizard Find: Search Curves control point lengths Invalid result. Value is infinite or NaN. Please, check your calculations. Refresh a pattern with all changes you made Refresh Preview calculations Unique variable name <html><head/><body>Search increments by term. Prepend "/r/" to the front of the search string to search increments by regex.</body></html> <html><head/><body>Search preview calculations by term. Prepend "/r/" to the front of the search string to search preview calculations by regex.</body></html> Increment Separator DialogInsertNode Piece: The list of pieces is empty. Please, first create at least one piece for current pattern piece. Insert nodes Delete למחוק DialogKnownMaterials Known materials Material: Name of material User material DialogLayoutProgress Create a Layout Nesting. Please, wait. Time left: Time left: %1 Efficiency coefficient: %1% DialogLayoutScale Layout scale Margins Left: cm Right: Top: Bottom: Scale Horizontal: Vertical: ... ... DialogLayoutSettings Templates: Width: Height: Three groups: big, middle, small Two groups: big, small Descending area Millimiters מילימטר Centimeters סנטימטרים Inches Pixels Create a layout Auto crop unused length Unite pages (if possible) Gap width: Save length of the sheet Paper format Left: Right: Top: Bottom: Wrong fields. Three groups: big, middle, small = 0; Two groups: big, small = 1; Descending area = 2 Layout options Rule for choosing the next workpiece Divide into strips Multiplier Set multiplier for length of the biggest workpiece in layout. Enabling for sheets that have big height will speed up creating. Printer: None Printer Text Text will be converted to paths Export text as paths Margins Ignore margins Margins go beyond printing. Apply settings anyway? Follow grainline Time: Time given for the algorithm to find best layout. Efficiency: Set layout efficiency coefficient. Layout efficiency coefficientt is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Manual priority Nest quantity of copies according to piece settings. Nest quantity Auto crop unused width Prefer one sheet solution min minutes Enable this option to prefer getting one sheet solutions. DialogLine First point נקודה ראשונה Second point נקודה שנייה Type of line סוג הקו Select second point לבחור נקודה שנייה Line between points First point: Second point: Type of line: Line color: Tool כלי Notes DialogLineIntersect Point label תווית הנקודה First line First point נקודה ראשונה Second point נקודה שנייה Second line Select second point of first line Select first point of second line Select second point of second line Point at line intersection Point label: Unique label Choose unique label. First point: Second point: Tool כלי Notes DialogLineIntersectAxis <html><head/><body>Show full calculation in message box</body></html> First point of line נקודה ראשונה בשורה Point label תווית הנקודה Type of line סוג הקו Show line from first point to this point Select second point of line Select axis point Point intersect line and axis Axis Point Second point of line נקודה שנייה בשורה Edit angle Angle: Formula wizard Value Calculation Axis point: First line point: Second line point: Point label: Unique label Choose unique label. Type of line: Line color: Tool כלי Notes DialogMDataBase Measurement data base Measurements Direct Height Measurement section Direct Width Measurement section Indentation Measurement section Circumference and Arc Measurement section Vertical Measurement section Horizontal Measurement section Bust Measurement section Balance Measurement section Arm Measurement section Leg Measurement section Crotch and Rise Measurement section Hand Measurement section Foot Measurement section Head Measurement section Men & Tailoring Measurement section Historical & Specialty Measurement section Patternmaking measurements Measurement section Collapse All Expand All Check all Uncheck all Search: Search Select measurement DialogMeasurementsCSVColumns Setup columns Preview Input Import Columns Full name: Description: Ready Name measurement column Value measurement column Full name measurement column Description measurement column Base value measurement column Shift (%1): measurement column Skip Name Value Base value Shift (%1)*: File path is empty Not enough columns Not enough data to import Please, select unique number for each column DialogMove Angle: Formula wizard Value <html><head/><body>Show full calculation in message box</body></html> Length: Suffix: Edit angle Edit length Calculation Move Rotation angle: Edit rotation angle Rotation origin point: Center point נקודת מרכז Enable to create a visibility gropup from original objects Visibility Group Name: Rotation Tags: Separate each tag with comma. Add tags Tool כלי Alias: Pen style: Color: Ready Notes Invalid suffix Invalid group name Label: Default Invalid angle formula Invalid rotation angle formula Invalid length formula Invalid label Invalid alias DialogNewMeasurements New measurement file Measurement type: Unit: Individual Centimeters סנטימטרים Millimiters מילימטר Inches Multisize DialogNewPattern Units: Centimeters סנטימטרים Millimiters מילימטר Inches Pattern piece name: Unique pattern piece name Choose unique pattern piece name. New pattern DialogNormal Length אורך Value of length ערך האורך <html><head/><body>Show full calculation in message box</body></html> Point label תווית הנקודה First point נקודה ראשונה Second point נקודה שנייה Type of line סוג הקו Select second point of line Point along perpendicular First point of line נקודה ראשונה בשורה Second point of line נקודה שנייה בשורה Edit length Length: Formula wizard Value Calculation Point label: Unique label Choose unique label. First point: Second point: Additional angle degrees: Type of line: Line color: Tool כלי Notes DialogPatternMaterials Dialog Placeholder Value DialogPatternProperties Pattern properties Pattern description Security Open only for read Call context menu for edit No image Delete image Change image Save image to file Show image Image for pattern Images Save File untitled Path: Show in Explorer <Empty> File was not saved yet. Show in Finder Pattern name: Pattern number: Company/Designer name: Customer name: Pattern For technical notes Label data Label template: Edit pattern label Edit template Date format: Time format: Save label data. Label data were changed. Do you want to save them before editing label template? Materials Pattern materials: Manage list of pattern materials Manage The customer name from individual measurements Label language: Customer birth date: yyyy-MM-dd Customer email: The customer email from individual measurements The customer birth date from individual measurements DialogPiecePath Piece path tool Path Name: Unnamed path Create name for your path Type: Piece: Type of pen: Ready! Seam allowance Width: Formula wizard Value Calculation <html><head/><body>Show full calculation in message box</body></html> Nodes Node: Before: Return to default width Default After: Angle: Reverse Delete למחוק Edit seam allowance width Edit seam allowance width before Edit seam allowance width after Internal path Custom seam allowance You need more points! First point of custom seam allowance cannot be equal to the last point! You have double points! Passmarks Passmark: One line Two lines Three lines Angle Straightforward Bisector Passmark Marks T mark V mark Please, select a detail to insert into! List of details is empty! Select if need designate the corner point as a passmark Intersection Each point in the custom seam allowance path must be unique! Cut on fabric Select if need designate the corner point as a passmark. Show only left passmark. Intersection (only left) Select if need designate the corner point as a passmark. Show only right passmark. Intersection (only right) Control Visible Create a formula that regulates visibility. Values different from "0" make a path visible. 1 Control visibility Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Check uniqueness Move on top Move up Move down Move on bottom Continue the first point to the cutting contour Continue the last point to the cutting contour The path is a cut contour. Use to control export to DXF-AAMA The list of pieces is empty. Please, first create at least one piece for current pattern piece. This option has effect only if the second passmark on seam line enabled in global preferences. The option helps disable the second passmark for this passmark only. Show the second passmark on seam line Excluded The same curve repeats twice! <Empty> Current seam allowance Acute angle that looks inside of piece Acute angle that looks outside of piece V mark 2 Select main path objects, %1 - reverse direction curve, %2 - finish creation Manual length Length: U mark Box mark Edit passmark length DialogPin Pin tool Point: Piece: Pin The list of pieces is empty. Please, first create at least one piece for current pattern piece. DialogPlaceLabel Width: Formula wizard Value Calculation <html><head/><body>Show full calculation in message box</body></html> Height: Angle: 0 Point: Piece: Type: Edit rectangle width Edit angle Segment Rectangle Cross T-shaped Doubletree Corner Triangle H-shaped Button Place label Control Visible Create a formula that regulates visibility. Values different from "0" make a path visible. 1 The list of pieces is empty. Please, first create at least one piece for current pattern piece. Control visibility Circle DialogPointFromArcAndTangent Point from arc and tangent Point label תווית הנקודה Select an arc Point label: Unique label Choose unique label. Tangent point: Arc: Take: Tool כלי Notes DialogPointFromCircleAndTangent Point from circle and tangent Radius רדיוס <html><head/><body>Show full calculation in message box</body></html> Point label תווית הנקודה Select a circle center Edit radius Error Radius can't be negative Radius: Formula wizard Value Calculation Point label: Unique label Choose unique label. Center of the circle: Tangent point: Take: Tool כלי Notes DialogPointOfContact Radius רדיוס Value of radius ערך הרדיוס <html><head/><body>Show full calculation in message box</body></html> Point label תווית הנקודה Select point of center of arc Select second point of line Point at intersection of arc and line Edit radius Radius: Formula wizard Value Calculation Point label: Unique label Choose unique label. Center of arc: Top of the line: End of the line: Tool כלי Notes DialogPointOfIntersection Point label תווית הנקודה Point from X and Y of two other points Select point for Y value (horizontal) Point label: Unique label Choose unique label. X: vertical point: Y: horizontal point: Tool כלי Notes DialogPointOfIntersectionArcs Point label תווית הנקודה Select second an arc Point label: Unique label Choose unique label. First arc: Second arc: Take: Tool point of intersetion arcs Tool כלי Notes DialogPointOfIntersectionCircles <html><head/><body>Show full calculation in message box</body></html> Point label תווית הנקודה Select second circle center Edit first circle radius Edit second circle radius Error Radius can't be negative Radius of the first circle: Formula wizard Value Calculation Radius of the second circle: Point label: Unique label Choose unique label. Center of the first circle: Center of the second circle: Take: Tool point of intersection circles Tool כלי Notes DialogPointOfIntersectionCurves Tool point of intersection curves First curve: Second curve: Point label: Unique label Choose unique label. Vertical correction: Horizontal correction: Select second curve Tool כלי Notes DialogPreferences Preferences Configuration Pattern Paths Followed %n option(s) require restart to take effect: %1. DialogRestrictDimension Restrict dimension Dimension A: Restriction Min: Max: DialogRotation Rotation Angle: Formula wizard Value <html><head/><body>Show full calculation in message box</body></html> Origin Point: Suffix: Edit angle Select origin point Calculation This point cannot be origin point. Please, select another origin point Enable to create a visibility gropup from original objects Visibility Group Name: Tags: Separate each tag with comma. Add tags Tool כלי Alias Pen style: Color: Ready Notes Invalid suffix Invalid group name Invalid rotation point Invalid label Invalid alias Invalid angle formula Label: Alias: Default DialogSaveLAyout Save Layout File name: Path: File format: Destination folder Select path to destination folder File base name Path to destination folder Binary form Text as paths Margins Right: Left: Top: Bottom: Paper format Browse… cm Templates: Orientation: Options אפשרויות Scale Horizontal: Vertical: ... ... DialogSaveLayout Name conflict Folder already contain file with name %1. Rewrite all conflict file names? Example: Select folder Tried to use out of range format number. Selected not present format. The destination directory doesn't exists or is not readable. The base filename does not match a regular expression. files (flat) files Image files tiled Numerical control Raw Layout Data DialogSeamAllowance Ready! Value Detail Grainline Reverse Delete למחוק Options אפשרויות Error. Can't save piece path. Infinite/undefined result Length should be positive Parser error: %1 Current seam allowance Edit seam allowance width Edit seam allowance width before Edit seam allowance width after You need more points! You have to choose points in a clockwise direction! First point cannot be equal to the last point! You have double points! Empty main path custom seam allowance Both Just front Just rear Pins no pin Labels Error Edit length Edit angle Edit height Edit width Paths Excluded Passmark Each point in the path must be unique! Passmarks Workpiece tool Segment Rectangle Cross T-shaped Doubletree Corner Triangle H-shaped Button Place label Check uniqueness To open all detail's features complete creating the main path. Please, press OK. The same curve repeats twice! <Empty> Select main path objects clockwise, %1 - reverse direction curve, %2 - finish creation Circle Edit passmark length DialogSetupMultisize Setup multisize measurements Use full circumference Height dimension Min value: Minimal value described in the column Max value: Maximal value described in the column Step: Single-step between the column values Base: The base value for the column Size dimension Circumference Waist dimension Hip dimension Please, provide correct data for dimensions Please, select at least one dimension No more than 3 dimensions allowed Ready DialogShoulderPoint Length אורך Value of length ערך האורך <html><head/><body>Show full calculation in message box</body></html> Point label תווית הנקודה First point נקודה ראשונה Second point נקודה שנייה Type of line סוג הקו Select first point of line לבחור נקודה ראשונה Select second point of line Special point on shoulder Edit length Length: Formula wizard Value Calculation Point label: Unique label Choose unique label. First point: Second point: Third point: Type of line: Line color: Tool כלי Notes DialogSinglePoint Single point Coordinates on the sheet Coordinates Y coordinate X coordinate Point label תווית הנקודה Unique label Choose unique label. Tool כלי Notes DialogSpline First point נקודה ראשונה Second point נקודה שנייה Select last point of curve Simple curve Color: First point: Control point Angle: Second point: Name: Invalid spline Length: Formula wizard Value <html><head/><body>Show full calculation in message box</body></html> Edit first control point angle Edit second control point angle Edit first control point length Edit second control point length Calculation Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Tool כלי Alias: Notes DialogSplinePath Curved path List of points Select point of curve path Color: Point: First control point Angle: Second control point Name: Invalid spline path Length: Formula wizard Value <html><head/><body>Show full calculation in message box</body></html> Edit first control point angle Edit second control point angle Edit first control point length Edit second control point length Not used Calculation Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Cannot find point with id %1 Tool כלי Alias: Notes DialogTapePreferences Preferences Configuration Paths Followed %n option(s) require restart to take effect: %1. DialogTool First point נקודה ראשונה Second point נקודה שנייה Highest point Lowest point Leftmost point Rightmost point by length by points intersetions by first edge symmetry by second edge symmetry by first edge right angle by second edge right angle DialogTriangle Point label תווית הנקודה First point of line נקודה ראשונה בשורה First point נקודה ראשונה Second point נקודה שנייה Select second point of axis Select first point לבחור נקודה ראשונה Select second point לבחור נקודה שנייה Triangle tool Second point of line נקודה שנייה בשורה Point label: Unique label Choose unique label. First point of axis: Second point of axis: First point: Second point: Tool כלי Notes DialogTrueDarts True darts Select the second base point Select the first dart point Select the second dart point Select the third dart point First base point: Second base point: First dart point: Second dart point: Third dart point: First new dart point: Unique label Choose unique label. Second new dart point: Tool כלי Notes DialogUndo Broken formula &Undo &Fix formula &Cancel Error while calculation formula. You can try to undo last operation or fix broken formula. DialogUnionDetails Union tool Select a first point Workpiece should have at least two points and three objects Select a second point Select a unique point Select a detail Select a point on edge <html><head/><body>Do you really want to unite details?</body></html> Retain original pieces FvUpdateWindow Software Update %1 %2 is now available - you have %3. Would you like to download it now? Skip This Version Remind Me Later Get Update %1 update is available! New %1 test version is now available. Would you like to download it now? FvUpdater Cannot open your default browser. Feed download failed: %1. Feed parsing failed: %1 %2. No updates were found. Feed error: invalid "enclosure" with the download link InternalStrings The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MApplication Error parsing file. Program will be terminated. Error bad id. Program will be terminated. Error can't convert value. Program will be terminated. Error empty parameter. Program will be terminated. Error wrong id. Program will be terminated. Something's wrong!! Parser error: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. Valentina's measurements editor. The measurement file. Invalid base size argument. Must be cm, mm or inch. Can't begin to listen for incoming connections on name '%1' Test mode doesn't support openning several files. Please, provide one input file. Use for unit testing. Run the program and open a file without showing the main window. Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Set base for dimension A in the table units. The dimension A base Set base for dimension B in the table units. The dimension B base Set base for dimension C in the table units. The dimension C base Set pattern file units: cm, mm, inch. The pattern units Invalid dimension A base value. Invalid dimension B base value. Invalid dimension C base value. Formula warning: %1. Program will be terminated. MainWindow Valentina ולנטינה Tools for creating points. Point נקודה Point along perpendicular Perpendicular point along line Point along bisector Point at distance and angle Point at distance along line Tools for creating lines. כלים ליצירת קווים. Line קו Line between points Point at line intersection Tools for creating curves. Curve עקומה Tools for creating arcs. Arc Tools for creating details. Detail &File &Help &Pattern piece Measurements Window Toolbar files ToolBar modes Toolbar pattern Toolbar options Toolbar tools Tool options New חדש &New Create a new pattern יצירת תבנית חדשה Open &Open Open file with pattern Save שמור &Save Save pattern שמירת תבנית Save not yet saved pattern Draw Details Pointer tools New pattern piece Add new pattern piece Change the label of pattern piece History About &Qt &About Valentina E&xit Exit the application Preferences Pattern properties Zoom in zoom in Zoom out Zoom fit best Report bug Pattern piece %1 Select point Select first point לבחור נקודה ראשונה Select first point of line לבחור נקודה ראשונה Select first point of angle Select first point of first line Select first point curve Select simple curve Select point of center of arc Select point of curve path Select curve path Select base point Select first point of axis Select detail Select arc Select curve About Qt pattern Save as שמירה בשם Could not save file Open file Error parsing file. Error can't convert value. Error empty parameter. שגיאה חסר פרמטר. Error wrong id. Error parsing file (std::bad_alloc). Bad id. File saved untitled.val The pattern has been modified. Do you want to save your changes? &Undo &Redo Pattern piece: Enter a new label for the pattern piece. This file already opened in another window. File error. Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Reopen files. Special point on shoulder Triangle tool Point from X and Y of two other points Point intersect line and axis Simple curve Curved path Segmenting a simple curve Segment a curved path Point intersect curve and axis Segment an arc Union tool Last Tool Activate last used tool again Select point for X value (vertical) Mode Pointer Config pattern piece Layout Show Curve Details Show/hide control points and curve direction Point of intersection arcs Point of intersection circles Point from circle and tangent Point from arc and tangent Arc with given length Settings Layout pages Print Print tiled PDF Split and print a layout into smaller pages (for regular printers) Print preview Print preview original layout Export original layout Select first an arc Select point of the center of the arc Select the first base line point Detail mode Layout mode Unsaved changes Measurements loaded You can't export empty scene. Create new Layout Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Measurement file contains invalid known measurement(s). Measurement file has unknown format. Measurement files types have not match. Couldn't sync measurements. Couldn't update measurements. The measurements file '%1' could not be found. Loading measurements file The method %1 does nothing in GUI mode Export error. Please, provide one input file. Print an original layout Preview tiled PDF Print preview tiled layout <html><head/><body>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage "Details mode". Before you will be able to enable the "Details mode" need create at least one detail.</body></html> <html><head/><body>Mode for working with details. Before you will be able to enable the "Details mode" need create at least one detail on the stage "Draw mode". Details created on this stage will be used for creating a layout. </body></html> <html><head/><body>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage "Details mode". The layout can be exported to your prefered file format and saved to your harddirve.</body></html> Measurements unloaded Couldn't unload measurements. Some of them are used in the pattern. True darts New pattern Open pattern Create/Edit measurements Don't Save Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Unknown error happened, for instance a full partition prevented writing out the lock file. Point intersection curves Select first curve Curve tool which uses point as control handle Select first curve point Select point of cubic bezier path Operations Create new group Rotate objects Close pattern Tool pointer Midpoint between two points Group Contains all visibility groups Show which details will go in layout Original zoom Select first circle center Select point on tangent Pattern Piece: The measurements file %1 could not be found. Do you want to update the file location? Flipping objects by line Flipping objects by axis Move objects Measurements were changed. Do you want to sync measurements now? Measurements have been synced Tools for creating elliptical arcs. Elliptical Arc Select point of center of elliptical arc Select main path objects clockwise. The document has no write permissions. Cannot set permissions for %1 to writable. Could not save the file. Could not save the file read only Variables Table Contains information about increments and internal variables Load Individual Load Individual measurements file Load Multisize Load multisize measurements file Open Tape Edit Current Edit linked to the pattern measurements Sync Synchronize linked to the pattern measurements after change Unload Current Unload measurements if they were not used in a pattern file Individual measurements Multisize measurements Pattern files Pin tool Select pin point Insert node tool Open Tape app for creating or editing measurements file Export increments to CSV Name The calculated value הערך המחושב Formula You can't use Detail mode yet. Please, create at least one workpiece. You can't use Layout mode yet. Please, create at least one workpiece. You can't use Layout mode yet. Please, include at least one detail in layout. You can't use Layout mode yet. Zoom fit best current zoom fit best current pattern piece Export details skiping the Layout stage You don't have enough details to export. Please, include at least one detail in layout. Export details Can't export details. Label template editor Workpiece tool Internal path tool Save &As… Report Bug… Export As… Save… Final measurements Export Final Measurements to CSV You can't export empty scene. Please, include at least one detail in layout. Export final measurements error. Destination path is empty. Next pattern piece Ctrl+PgDown Previous pattern piece Ctrl+PgUp Place label tool Duplicate detail tool Select placelabel center point The measurements file '%1' could not be found or provides not enough information. Use these tools to create a pattern Scale: Create new pattern piece to start working. Changes applied. Cannot save settings. Access denied. Ctrl+O Cannot read settings from a malformed .INI file. Select path objects, %1 - reverse direction curve Select one or more objects, hold %1 - for multiple selection, %2 - finish creation Select one or more objects, hold %1 - for multiple selection, %2 - confirm selection Point of intersection circle and segment Increase label font Decrease label font Original label font Hide labels Groups of visibility Export recipe Recipe files recipe Could not save recipe. %1 Curved path tool which uses point as control handle Point of intersection arc and axis Show main path Globally show pieces main path Pattern messages Clear all messages Filter DEBUG WARNING CRITICAL FATAL INFO Auto refresh the list with each parse Watermark Load Remove Edit current Editor Create or edit a watermark Watermark files Manual Layout Open Puzzle Open the Puzzle app Create Create manual layout Update Update manual layout Do you want to change the premissions? Unable to prepare raw layout data. Manual layout files Select manual layout Not supported dimension A value '%1' for this pattern file. Couldn't set dimension A. Need a file with multisize measurements. Couldn't set dimension A. File wasn't opened. Not supported dimension B value '%1' for this pattern file. Couldn't set dimension B. Need a file with multisize measurements. Couldn't set dimension B. File wasn't opened. Not supported dimension C value '%1' for this pattern file. Couldn't set dimension C. Need a file with multisize measurements. Couldn't set dimension C. File wasn't opened. MainWindowsNoGUI Creating file '%1' failed! %2 Critical error! Print error Cannot proceed because there are no available printers in your system. unnamed The layout is stale. The layout was not updated since last pattern modification. Do you want to continue? Couldn't prepare data for creation layout Can't open printer %1 For previewing multipage document all sheet should have the same size. For printing multipages document all sheet should have the same size. Pages will be cropped because they do not fit printer paper size. Cannot set printer margins Can't create a path Pattern Name Value Export final measurements error. Value in line %1 is infinite or NaN. Please, check your calculations. Parser error at line %1: %2. File error %1. One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Description Measurement file has unknown format. Measurement file contains invalid known measurement(s). File error. Measurement file doesn't include all required measurements. Please, additionally provide: %1 Preparing details for layout Timeout. Cannot set printer page size Cannot set custom printer page size Process has been stoped because of exception. File error. %1 %2 Failed to open file, is it writable? Export raw layout data failed. %1. MoveDoubleLabel move the first dart label move the second dart label MoveLabel move point label MoveSPoint move single point MoveSpline move spline MoveSplinePath move spline path OperationMoveLabel move point label OperationShowLabel toggle label PreferencesConfigurationPage Save שמור Auto-save modified pattern Interval: min Language GUI language: Decimal separator parts: Default unit: Label language: Pattern making system Pattern making system: Author: Book: Pattern editing Reset warnings Toolbar The text appears under the icon (recommended for beginners). With OS options Centimeters סנטימטרים Millimiters מילימטר Inches Update a pattern only after a curve release Free curve mode default unit General Double click calls Zoom fit best for current pattern piece Scrolling Animation Duration: Scrolling animation duration ms milliseconds Update interval: Time in milliseconds between each animation update Mouse scale Sensor: sensor mouse Scale scrolling sensitivity for mouse with sensor Wheel: mouse wheel Scale scrolling sensitivity for mouse with wheel Acceleration: User Interface Activate dark mode dark mode Change the position of the tool panel to optimize for big screen resolutions. By default, the tool panel will take all available space. Tool panel scaling PreferencesPathPage Paths that Valentina uses Type Path Default Edit Open Directory My Individual Measurements My Multisize Measurements My Patterns My Layouts My Templates My label templates My manual layouts PreferencesPatternPage Graphical output Use antialiasing Undo Count steps (0 - no limit): Workpiece Forbid flipping Show a passmark both in the seam allowance and on the seam line. Show second passmark on seam line By default forbid flipping for all new created workpieces By default hide the main path if the seam allowance was enabled Hide main path Label font: Seam allowance Default value: Label data/time format Date: Edit formats Time: Materials Known materials: Manage list of known materials Manage When manage pattern materials save them to known materials list Remeber pattern materials Curve approximation: Set default curve approximation scale Bold line width Line width: Millimiters מילימטר Inches Use OpenGL to render a scene. This option will take an affect after restart. Use OpenGL render antialiasing scene render QCoreApplication Based on Qt %1 (%2, %3 bit) VLayoutPassmark prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VLayoutPassmark compatibility error: actualClassVersion = %1 and classVersion = %2 VLayoutPlaceLabel prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VLayoutPlaceLabel compatibility error: actualClassVersion = %1 and classVersion = %2 VAbstractPieceData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VAbstractPieceData compatibility error: actualClassVersion = %1 and classVersion = %2 VRawLayoutData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VRawLayoutData compatibility error: actualClassVersion = %1 and classVersion = %2 VLayoutPiecePathData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VLayoutPiecePathData compatibility error: actualClassVersion = %1 and classVersion = %2 TextLine prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 TextLine compatibility error: actualClassVersion = %1 and classVersion = %2 VTextManager prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VTextManager compatibility error: actualClassVersion = %1 and classVersion = %2 CustomSARecord prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 CustomSARecord compatibility error: actualClassVersion = %1 and classVersion = %2 VPieceNodeData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VPieceNodeData compatibility error: actualClassVersion = %1 and classVersion = %2 QObject mm cm inch Property The text that appears in the first column header Value The text that appears in the second column header px move detail Wrong tag name '%1'. Can't convert toUInt parameter Can't convert toBool parameter Got empty parameter Can't convert toDouble parameter Got wrong parameter id. Need only id > 0. United detail Fabric Lining Interfacing Interlining Cut on fold Visibility trigger contains error and will be ignored User material number %1 was not defined in this pattern. Error in internal path '%1'. There is no intersection of first point with cutting countour Error in internal path '%1'. There is no intersection of last point with cutting countour Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. Cannot get tokens from formula '%1'. Parser error: %2. Error Empty formula Invalid result. Value is infinite or NaN. Please, check your calculations. Value can't be 0 Value can't be less than 0 Parser error: %1 Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. Piece '%1'. Seam allowance is not valid. Found null notch for point '%1' in piece '%2'. Length is less than minimal allowed. Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. Cannot calculate seam allowance before for point '%1'. Reason: %2. Cannot calculate seam allowance after for point '%1'. Reason: %2. Cannot calculate seam allowance after for point '%1'. Reason: Cannot calculate passmark length for point '%1'. Reason: %2. Passmark '%1' is not part of piece '%2'. Cannot cast tool with id '%1'. Empty list of nodes for tool with id '%1'. Invalid formula '%1' for tool with id '%2'. %3. Can't convert toInt parameter Piece name '%1' is not unique. Could not find the segment start. Could not find the segment end. Segment is too short. Error calculating segment for curve '%1'. %2 Error in path '%1'. Calculating segment for curve '%2' has failed. %3 Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. Cannot get tokens from formula '%1'. Formula error: %2. QmuParser too few arguments for function sum. parser error message too few arguments for function min. parser error message QmuParserErrorMsg Unexpected token "$TOK$" found at position $POS$. Math parser error messages. Left untouched "$TOK$" and $POS$ Internal error Math parser error messages. Invalid function-, variable- or constant name: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid binary operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid infix operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid postfix operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid pointer to callback function. Math parser error messages. Expression is empty. Math parser error messages. Invalid pointer to variable. Math parser error messages. Unexpected operator "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected end of expression at position $POS$ Math parser error messages. Left untouched $POS$ Unexpected argument separator at position $POS$ Math parser error messages. Left untouched $POS$ Unexpected parenthesis "$TOK$" at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected function "$TOK$" at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected value "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected variable "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Function arguments used without a function (position: $POS$) Math parser error messages. Left untouched $POS$ Missing parenthesis Math parser error messages. Too many parameters for function "$TOK$" at expression position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Too few parameters for function "$TOK$" at expression position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Divide by zero Math parser error messages. Domain error Math parser error messages. Name conflict Math parser error messages. Invalid value for operator priority (must be greater or equal to zero). Math parser error messages. user defined binary operator "$TOK$" conflicts with a built in operator. Math parser error messages. Left untouched "$TOK$" Unexpected string token found at position $POS$. Math parser error messages. Left untouched $POS$ Unterminated string starting at position $POS$. Math parser error messages. Left untouched $POS$ String function called with a non string type of argument. Math parser error messages. String value used where a numerical argument is expected. Math parser error messages. No suitable overload for operator "$TOK$" at position $POS$. Math parser error messages. Left untouched "$TOK$" and $POS$ Function result is a string. Math parser error messages. Parser error. Math parser error messages. Decimal separator is identic to function argument separator. Math parser error messages. The "$TOK$" operator must be preceeded by a closing bracket. Math parser error messages. Left untouched "$TOK$" If-then-else operator is missing an else clause Math parser error messages. Do not translate operator name. Misplaced colon at position $POS$ Math parser error messages. Left untouched $POS$ RemoveItemFromGroup Remove item from group RenameGroup rename group RenamePP rename pattern piece SavePieceOptions save detail options SavePiecePathOptions save path options SavePlaceLabelOptions save place label options SaveToolOptions save tool option ShowDoubleLabel toggle the first dart label togggle the second dart label ShowLabel toggle label TMainWindow <html><head/><body>Select New for creation measurement file.</body></html> Calculated value Details Name: Formula: <html><head/><body>Show full calculation in message box</body></html> Base value: Description: Move measurement up Move measurement down Calculated value: Full name: Information Type: Measurement type Path: Show in Explorer Birth date: Email: Notes: File קובץ Measurements Menu Gradation Save שמור About &Qt New חדש Add known Add custom Read only Open template Database Show information about all known measurement Preferences untitled %1 This file already opened in another window. File error. Could not save file measurements Save as שמירה בשם &New Window Edit measurement Error Empty field. Parser error: %1 Individual measurements Unsaved changes Measurements have been modified. Do you want to save your changes? Empty field Value Open file Import from a pattern Pattern files (*.val) Pattern unit: Find: Find Previous Ctrl+Shift+G Find Next Ctrl+G Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. File contains invalid known measurement(s). File has unknown format. File '%1' doesn't exist! The name of known measurement forbidden to change. Can't find measurement '%1'. The full name of known measurement forbidden to change. Function Wizard Move measurement top Move measurement bottom Delete measurement unknown gender male gender female gender Gender: PM system: Create from existing file Select file Measurement diagram <html><head/><body>?Unknown measurement</body></html> <html><head/><body>?Unknown measurement</body></html> About Qt File was not saved yet. Search Measurement's name in a formula Measurement's name in a formula. Measurement's human-readable name. Don't Save Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Unknown error happened, for instance a full partition prevented writing out the lock file. Export to CSV Show in Finder Comma-Separated Values Customer's name Customer's email address All files The measurements document has no write permissions. Cannot set permissions for %1 to writable. Could not save the file. Could not save the file read only Multisize measurements Invalid result. Value is infinite or NaN. Please, check your calculations. Empty Export from multisize measurements is not supported. Customer name: Open multisize … Create from existing … Save… Import from CSV Measurement name in is empty. Merasurement '%1' doesn't match regex pattern. Merasurement '%1' already used in file. Measurement '%1' is not one of known measurements. Individual measurements require at least 2 columns. Error in row %1. Multisize measurements require at least 4 columns. Imported file must not contain the same name twice. Error in row %1. Measurement name is empty. Cannot save settings. Access denied. &File &Window &Help &Measurements &Open individual … &Save Save &As … &Quit &About Tape &New <html><head/><body>Search measurements by term. Prepend "/r/" to the front of the search string to search measurements by regex.</body></html> Do you want to change the premissions? Cannot read settings from a malformed .INI file. Name measurement column Full name measurement column Calculated value measurement column Formula measurement column Base value measurement column Correction measurement column Units: Shift B Shift C Correction: Dimension: Select one of the dimensions to later use the measurement value in piece label Base Values: Export to individual Export to individual measurements Use full circumference Restrict second dimension Restrict third dimension Dimension labels The table doesn't provide dimensions Invalid base value for dimension A The table doesn't support dimension B Invalid base value for dimension B The table doesn't support dimension C Invalid base value for dimension C measurements.vit Shift (%1): %1 shift Cannot convert base value to double in column 2. Cannot convert shift value to double in column %1. Millimeters Inches Centimeters סנטימטרים Degrees TabGrainline Grainline visible Rotation: Formula wizard Value Calculation <html><head/><body>Show full calculation in message box</body></html> Length: Center pin: Top pin: Bottom pin: Arrows: TabLabels Piece label data Letter: Letter of pattern piece Placement: Labels Detail label visible Width: Formula wizard Value Calculation <html><head/><body>Show full calculation in message box</body></html> Height: Center pin: Top left pin: Bottom right pin: Angle: Pattern label visible Label template: Edit template Label data Quantity: on fold Annotation: A text field to add comments in Orientation: Rotation: Tilt: Fold position: Edit piece label template Options to control position a detail label. Not available if a detail label template is empty. Options to control position a pattern label. Not available if a pattern label template is empty. TabPassmarks Passmark: One line Two lines Three lines T mark V mark Angle Straightforward Bisector Marks Select if need designate the corner point as a passmark Intersection Show the second passmark on seam line This option has effect only if the second passmark on seam line enabled in global preferences. The option helps disable the second passmark for this passmark only. Select if need designate the corner point as a passmark. Show only left passmark. Intersection (only left) Select if need designate the corner point as a passmark. Show only right passmark. Intersection (only right) Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Acute angle that looks intside of piece Acute angle that looks outside of piece V mark 2 Manual length Length: Formula wizard Value Calculation <html><head/><body>Show full calculation in message box</body></html> U mark Box mark List of all defined passmarks. To define a passmark return to the Main Path tab, call context menu for a point item and make it a passmark. TabPaths Main path All objects in path should follow in clockwise direction. Forbid piece be mirrored in a layout. Forbid flipping Ready! Seam allowance Width: Formula wizard Value Calculation <html><head/><body>Show full calculation in message box</body></html> Nodes Node: Before: Return to default width Default After: Angle: Start point: End point: Include as: Internal paths The seam allowance is part of main path Built in Hide the main path if the seam allowance is enabled Hide main path Name of detail: Detail Name can't be empty Force piece to be always flipped in a layout. Force flipping Move on top Move up Move down Move on bottom Priority: Controls priority in layout. 0 - no priority. Automatic seam allowance Custom seam allowance Piece Universally Unique IDentifier of piece. Used to identifier piece while updating manual layout. Left empty to generate new value. {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} TabPlaceLabels Dialog TapePreferencesConfigurationPage Language GUI language: Decimal separator parts: Pattern making system Pattern making system: Author: Book: Measurements editing Reset warnings Toolbar The text appears under the icon (recommended for beginners). With OS options User Interface Activate dark mode dark mode TapePreferencesPathPage Paths that Valentina uses Type Path Default Edit Open Directory My Individual Measurements My Multisize Measurements My Templates My Patterns TogglePieceForceForbidFlipping piece flipping TogglePieceInLayout detail in layout list Utils::CheckableMessageBox Do not ask again Do not &ask again Do not &show again VAbstartMeasurementDimension Invalid min/max range Invalid step Base value invalid Height dimension Size dimension Waist dimension Hip dimension Chest full circumference dimension Chest half circumference dimension Size Chest circumference dimension Waist full circumference dimension Waist half circumference dimension Hip full circumference dimension Hip half circumference dimension VAbstractConverter Error no unique id. Could not change version. Error creating a reserv copy: %1. Unexpected version "%1". Error openning a temp file: %1. Invalid version. Minimum supported format version is %1 Invalid version. Maximum supported format version is %1 Can't open file %1: %2. Can't open schema file %1: %2. Could not load schema file '%1'. Validation error file %3 in line %1 column %2 VAbstractCubicBezierPath Can't cut this spline VAbstractLayoutDialog Letter Paper format Legal Paper format Tabloid Paper format Roll 24in Paper format Roll 30in Paper format Roll 36in Paper format Roll 42in Paper format Roll 44in Paper format Roll 48in Paper format Roll 62in Paper format Roll 72in Paper format Custom Paper format VAbstractNode This id (%1) is not unique. VAbstractOperation Label Length אורך operation options delete operation Visibility group default VAbstractPattern Can't find tool in table. Error creating or updating group New group measurement VAbstractPiece Piece '%1'. Not enough points to build seam allowance. VAbstractPieceData Detail VAbstractSpline Length אורך Label VAbstractTool black green blue dark red dark green dark blue yellow Confirm deletion Do you really want to delete? light salmon orange deep pink violet dark violet medium sea green lime deep sky blue corn flower blue Edit wrong formula goldenrod VApplication Error parsing file. Program will be terminated. Error bad id. Program will be terminated. Error can't convert value. Program will be terminated. Error empty parameter. Program will be terminated. Error wrong id. Program will be terminated. Something's wrong!! Parser error: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. Invalid notch. Formula warning: %1. Program will be terminated. VBank Preparing data for layout error: Detail '%1' square <= 0 Preparing data for layout error: Layout paper sheet <= 0 Preparing data for layout error: List of details is empty VCommandLine Path to custom measure file (export mode). The measure file Format number Template number The page width The measure unit Auto crop unused length (export mode). Layout units (as paper's one except px, export mode). The unit The gap width Grouping type Page height, width, units must be used all 3 at once. Unknown page templated selected. Unsupported paper units. Unsupported layout units. Export options can be used with single input file only. Test option can be used with single input file only. The base filename of exported layout files. Use it to enable console export mode. The base filename of layout files The destination folder Page width in current units like 12.0 (cannot be used with "%1", export mode). Page height in current units like 12.0 (cannot be used with "%1", export mode). Pattern making program. Pattern file. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Gap width must be used together with shift units. Left margin must be used together with page units. Right margin must be used together with page units. Top margin must be used together with page units. Bottom margin must be used together with page units. The path to output destination folder. By default the directory at which the application was started. Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. Sets layout groupping cases (export mode): %1. Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Number corresponding to output format (default = 0, export mode): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Export dxf in binary form. Export text as paths. Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Export only details that match a piece name regex. The name regex Export to csv with header. By default disabled. Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Codec name Specify csv separator character. Default value is '%1'. Valid characters: Separator character Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Path to csv file Number corresponding to layout page template (default = 0, export mode): Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. The left margin Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. The right margin Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. The top margin Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. The bottom margin Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Cannot use pageformat and page explicit size together. Tiled left margin must be used together with page units. Tiled right margin must be used together with page units. Tiled top margin must be used together with page units. Tiled bottom margin must be used together with page units. Page measure units (export mode). Valid values: %1. Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. User material Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. Invalid user material '%1'. Separator is missing. Invalid user material '%1'. Wrong material number. Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. The page height Order detail to follow grainline direction (export mode). <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. Time Coefficient Time must be in range from 1 minute to 60 minutes. Follow manual priority over priority by square (export mode). Nest quantity copies of each piece (export mode). Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. Coefficient must be in range from 0 to 100. Auto crop unused width (export mode). Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). Horizontal scale Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). Vertical scale Prefer one sheet layout solution (export mode). Invalid dimension A value. Invalid dimension B value. Invalid dimension C value. Set base for dimension A in the multisize measurements units (export mode). The dimension A base Set base for dimension B in the multisize measurements units (export mode). The dimension B base Set base for dimension C in the multisize measurements units (export mode). The dimension C base VCommonSettings measurements individual multisize templates label templates patterns manual layouts VContainer Can't find object Can't cast object Can't find object. Type mismatch. Number of free id exhausted. Can't create a curve with type '%1' Can't cast object. VCubicBezierPath Not enough points to create the spline. This spline does not exist. VDomDocument Can't open file %1: %2. Parsing error file %3 in line %1 column %2 Couldn't get node Fail to write Canonical XML. <empty> Not unique id (%1) This id (%1) is not unique. Couldn't get version information. Too many tags <%1> in file. Version "%1" invalid. Version "0.0.0" invalid. VDrawTool Options אפשרויות Delete למחוק This id (%1) is not unique. Add to group Remove from group Show label Restore label position VException Exception: %1 VFormula Error Data container is empty Math parser error: %1 Result is infinite Result is NaN Result is zero Result less than zero Formula is empty Not evaluated VFormulaData Not evaluated Error Formula is empty VFormulaProperty Formula VLayoutPiece Piece %1 doesn't have shape. VMeasurements Can't find measurement '%1' The measurement name is empty! None Height Size Hip Waist VNodePoint Options אפשרויות In layout Show label Exclude Delete למחוק Forbid flipping Force flipping by length by points intersetions by first edge symmetry by second edge symmetry by first edge right angle by second edge right angle Passmark Seam allowance angle Passmark angle Straightforward Bisector Intersection Intersection (only left) Intersection (only right) Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Passmark mark One line Two lines Three lines T mark V mark V mark 2 U mark Box mark VPE::VBoolProperty True False VPE::VFileEditWidget Directory Open File VPattern Error parsing file. Error can't convert value. Error empty parameter. שגיאה חסר פרמטר. Error wrong id. Error parsing file (std::bad_alloc). Error creating or updating detail Error creating or updating single point Error creating or updating point of end line Error creating or updating point along line Error creating or updating point of shoulder Error creating or updating point of normal Error creating or updating point of bisector Error creating or updating point of contact Error creating or updating modeling point Error creating or updating height Error creating or updating triangle Error creating or updating point of intersection Error creating or updating cut spline point Error creating or updating cut spline path point Error creating or updating cut arc point Error creating or updating point of intersection line and axis Error creating or updating point of intersection curve and axis Error creating or updating line Error creating or updating simple curve Error creating or updating curve path Error creating or updating modeling simple curve Error creating or updating modeling curve path Error creating or updating simple arc Error creating or updating modeling arc Error creating or updating union details Error creating or updating point of intersection arcs Error creating or updating point of intersection circles Error creating or updating point from circle and tangent Error creating or updating point from arc and tangent Error creating or updating true darts Wrong tag name '%1'. Unknown point type '%1'. Unknown spline type '%1'. Unknown arc type '%1'. Unknown tools type '%1'. Error not unique id. Error creating or updating point of intersection curves Error creating or updating simple interactive spline Error creating or updating interactive spline path Error creating or updating cubic bezier curve Error creating or updating cubic bezier path curve Error creating or updating operation of rotation Unknown operation type '%1'. Error creating or updating operation of flipping by line Error creating or updating operation of flipping by axis Error creating or updating operation of moving Error creating or updating point of line intersection Error creating or updating simple elliptical arc Unknown elliptical arc type '%1'. Error creating or updating modeling elliptical arc Detail Unnamed path Error creating or updating a piece path Error creating or updating pin point Error creating or updating place lavel Piece path doesn't contain nodes VPatternRecipe Invalid tag %1 Can't find element by id '%1' Can't create history record for the tool. Reading final measurements error. Value for final measurtement '%1' is infinite or NaN. Please, check your calculations. VPiece Cannot calculate a notch for point '%1' in piece '%2'. Notch for point '%1' in piece '%2' will be disabled. Manual length is less than allowed value. Main path of piece %1 VPoster Grid ( %1 , %2 ) Page %1 of %2 Sheet %1 of %2 Not supported file suffix '%1' cm unit in unit Cannot open the watermark image. VRawLayout VRawLayout::ReadFile() failed. Raw layout format prefix mismatch error. VRawLayout::ReadFile() failed. Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = %2 VSplinePath Not enough points to create the spline. This spline does not exist. VToolAlongLine Length אורך Angle Label VToolArc Length אורך Radius רדיוס Start angle End angle Label VToolArcWithLength Length אורך Radius רדיוס Start angle End angle Label VToolBasePoint Label VToolCurveIntersectAxis Error calculating point '%1'. There is no intersection with curve '%2' and axis through point '%3' with angle %4° VToolCutArc Arc length start angle end angle radius label VToolCutSpline Curve עקומה length label VToolCutSplinePath Curve עקומה length label VToolDetail Options אפשרויות Delete למחוק VToolDoublePoint Label VToolEllipticalArc Length אורך Radius רדיוס Start angle End angle Label Rotation VToolFlippingByAxis Origin point Flipping by axis VToolFlippingByLine First line point Second line point flipping by line VToolHeight Length אורך Angle Label VToolLine Length אורך Angle VToolLineIntersect Label Error calculating point '%1'. Lines (%2;%3) and (%4;%5) have no point of intersection VToolLineIntersectAxis Length אורך Angle Label Error calculating point '%1'. Line (%2;%3) doesn't have intersection with axis through point '%4' and angle %5° VToolLinePoint Length אורך Angle Label VToolMove Rotation angle Length אורך Center point נקודת מרכז Angle Rotation origin point move VToolOptionsPropertyBrowser Base point Point label תווית הנקודה Point at distance and angle Length אורך Point at distance along line Arc Radius רדיוס Point along bisector Cut arc tool Tool for segmenting a curve Tool segment a pathed curve Perpendicular point along line Line between points Point at line intersection Point along perpendicular Tool to make point from x & y of two other points Special point on shoulder Curve tool Tool for path curve Tool triangle Point intersection line and axis Point intersection curve and axis First point נקודה ראשונה Second point נקודה שנייה Arc with given length True darts Tool to make point from intersection two arcs Tool to make point from intersection two circles Tool to make point from circle and tangent Tool to make point from arc and tangent Highest point Lowest point Leftmost point Rightmost point Tool to make point from intersection two curves Cubic bezier curve Tool cubic bezier curve Tool rotation Vertical axis Horizontal axis Tool move Tool flipping by line Tool flipping by axis Elliptical arc Point label: Position: Base point: Line type: Line color: Length: Angle: First point: Second point: Center point: Radius: First angle: Second angle: Color: Third point: Point 1 label: Point 2 label: First base point: Second base point: First dart point: Arc: Curve: First line point: Second line point: First line (first point): First line (second point): Second line (first point): Second line (second point): Additional angle degrees: Center of arc: Top of the line: End of the line: X: vertical point: Y: horizontal point: First arc: Second arc: Take: Center of the first circle: Center of the second circle: First circle radius: Second circle radius: First curve: Second curve: Vertical correction: Horizontal correction: Center of the circle: Tangent point: Circle radius: Name: C1: angle: C1: length: C2: angle: C2: length: First point of axis: Second point of axis: Axis point: Suffix: Origin point: Axis type: Rotation angle: Fourth point: Pen style: Approximation scale: Rotation origin point: Notes: Alias: Alias1: Alias2: Point of intersection circle and segment VToolPointFromArcAndTangent Error calculating point '%1'. Tangent to arc '%2' from point '%3' cannot be found VToolPointFromCircleAndTangent Error calculating point '%1'. Tangent to circle with center '%2' and radius '%3' from point '%4' cannot be found VToolPointOfContact Length אורך Angle Label Error calculating point '%1'. Circle with center '%2' and radius '%3' doesn't have intersection with line (%4;%5) VToolPointOfIntersectionArcs Error calculating point '%1'. Arcs '%2' and '%3' have no point of intersection VToolPointOfIntersectionCircles Error calculating point '%1'. Circles with centers in points '%2' and '%3' have no point of intersection VToolPointOfIntersectionCurves Error calculating point '%1'. Curves '%2' and '%3' have no point of intersection VToolRotation Origin point Rotation angle rotate VToolSeamAllowance Current seam allowance move pattern piece label resize pattern piece label rotate pattern piece label move pattern info label resize pattern info label rotate pattern info label move grainline resize grainline rotate grainline Options אפשרויות In layout Delete למחוק apply save detail options multi deletion Forbid flipping Force flipping This id (%1) is not unique. Tool was used after deleting. VToolShoulderPoint Length אורך Angle Label VToolTriangle Error calculating point '%1'. Point of intersection cannot be found VToolUnionDetails union details This id (%1) is not unique. VTranslateVars Bunka System name Bunka Fashion College Author name Fundamentals of Garment Design Book name Barnfield and Richard System name Jo Barnfield and Andrew Richards Author name Pattern Making Primer Book name Friendship/Women System name Elizabeth Friendship Author name Creating Historical Clothes - Pattern Cutting from the 16th to the 19th Centuries Book name Morris, K. System name Karen Morris Author name Sewing Lingerie that Fits Book name Castro System name Lucia Mors de Castro Author name Patternmaking in Practic Book name Kim & Uh System name Injoo Kim and Mykyung Uh Author name Apparel Making in Fashion Design Book name Waugh System name Norah Waugh Author name Corsets and Crinolines Book name Grimble System name Frances Grimble Author name Fashions of the Gilded Age Book name Thornton's International System System name ed. R. L. Shep Author name The Great War: Styles and Patterns of the 1910s Book name Hillhouse & Mansfield System name Marion S. Hillhouse and Evelyn A. Mansfield Author name Dress Design: Draping and Flat Pattern Making Book name Pivnick System name Esther Kaplan Pivnick Author name How to Design Beautiful Clothes: Designing and Pattern Making Book name Minister & Son System name Edward Minister & Son, ed. R. L. Shep Author name The Complete Guide to Practical Cutting (1853) Book name Strickland System name Gertrude Strickland Author name A Tailoring Manual Book name Loh & Lewis System name May Loh and Diehl Lewis Author name Patternless Fashion Design Book name Morris, F. R. System name F. R. Morris Author name Ladies Garment Cutting and Making Book name Mason System name Gertrude Mason Author name Gertrude Mason's Patternmaking Book Book name Kimata System name K. Kimata Author name K.Kimata's Simplified Drafting Book for Dressmaking Book name Master Designer System name The Master Designer (Chicago, IL) Author name Master Designer's System of Designing, Cutting and Grading Book name Kopp System name Ernestine Kopp, Vittorina Rolfo, Beatrice Zelin, Lee Gross Author name How to Draft Basic Patterns Book name Ekern System name Doris Ekern Author name Slacks Cut-to-Fit for Your Figure Book name Doyle System name Sarah J. Doyle Author name Sarah's Key to Pattern Drafting Book name Shelton System name Karla J. Shelton Author name Design and Sew Jeans Book name Lady Boutique System name Lady Boutique Author name Lady Boutique magazine (Japan) Book name Rohr System name M. Rohr Author name Pattern Drafting and Grading: Women's nd Misses' Garment Design Book name Moore System name Dorothy Moore Author name Dorothy Moore's Pattern Drafting and Dressmaking Book name Abling System name Bina Abling Author name Integrating Draping, Drafting and Drawing Book name Fukomoto System name Sue S. Fukomoto Author name Scientific Pattern Drafting as taught at Style Center School of Costume Design, Dressmaking and Millinery Book name Dressmaking International System name Dressmaking International Author name Dressmaking International magazine (Japan) Book name Erwin System name Mabel D. Erwin Author name Practical Dress Design Book name Gough System name E. L. G. Gough Author name Principles of Garment Cutting Book name Allemong System name Elizabeth M. Allemong Author name European Cut Book name McCunn System name Donald H. McCunn Author name How to Make Your Own Sewing Patterns Book name Zarapkar System name Shri K. R. Zarapkar and Shri Arvind K. Zarapkar Author name Zarapkar System of Cutting Book name Kunick System name Philip Kunick Author name Sizing, Pattern Construction and Grading for Women's and Children's Garments Book name Handford System name Jack Handford Author name Professional Patternmaking for Designers: Women's Wear, Men's Casual Wear Book name Davis System name R. I. Davis Author name Men's 17th & 18th Century Costume, Cut & Fashion Book name MacLochlainn System name Jason MacLochlainn Author name The Victorian Tailor: An Introduction to Period Tailoring Book name Joseph-Armstrong System name Helen Joseph-Armstrong Author name Patternmaking for Fashion Design Book name Supreme System System name Frederick T. Croonberg Author name The Blue Book of Men's Tailoring, Grand Edition of Supreme System for Producing Mens Garments (1907) Book name Sugino System name Dressmaking Author name Pattern Drafting Vols. I, II, III (Japan) Book name Centre Point System System name Louis Devere Author name The Handbook of Practical Cutting on the Centre Point System Book name Aldrich/Men System name Winifred Aldrich Author name Metric Pattern Cutting for Menswear Book name Aldrich/Women System name Metric Pattern Cutting for Women's Wear Book name Kershaw System name Gareth Kershaw Author name Patternmaking for Menswear Book name Gilewska System name Teresa Gilewska Author name Pattern-Drafting for Fashion: The Basics Book name Lo System name Dennic Chunman Lo Author name Pattern Cutting Book name Bray System name Natalie Bray Author name Dress Pattern Designing: The Basic Principles of Cut and Fit Book name Knowles/Men System name Lori A. Knowles Author name The Practical Guide to Patternmaking for Fashion Designers: Menswear Book name Friendship/Men System name Pattern Cutting for Men's Costume Book name Brown System name P. Clement Brown Author name Art in Dress Book name Mitchell System name Jno. J. Mitchell Author name "Standard" Work on Cutting (Men's Garments) 1886: The Art and Science of Garment Cutting Book name GOST 17917-86 System name Ministry of consumer industry of the USSR Author name Standard figure boys Book name Eddy System name Josephine F. Eddy and Elizabeth C. B. Wiley Author name Pattern and Dress Design Book name Knowles/Women System name Practical Guide to Patternmaking for Fashion Designers: Juniors, Misses, and Women Book name American Garment Cutter System name None System name Valentina team Author name Valentina's internal standard Book name sinh hyperbolic sine function cosh hyperbolic cosine tanh hyperbolic tangens function asinh hyperbolic arcus sine function atanh hyperbolic arcur tangens function log2 logarithm to the base 2 log10 logarithm to the base 10 log logarithm to the base 10 ln logarithm to base e (2.71828...) exp e raised to the power of x sqrt square root of a value sign sign function -1 if x<0; 1 if x>0 rint round to nearest integer abs absolute value min min of all arguments max max of all arguments sum sum of all arguments avg mean value of all arguments fmod Returns the floating-point remainder of numer/denom (rounded towards zero) Line_ Left symbol _ in the name AngleLine_ Left symbol _ in the name Arc_ Left symbol _ in the name Spl_ Left symbol _ in the name SplPath Do not add symbol _ to the end of the name RadiusArc_ Left symbol _ in the name Angle1Arc_ Left symbol _ in the name Angle2Arc_ Left symbol _ in the name Angle1Spl_ Left symbol _ in the name Angle2Spl_ Left symbol _ in the name Angle1SplPath Do not add symbol _ to the end of the name Angle2SplPath Do not add symbol _ to the end of the name Seg_ Segment. Left symbol _ in the name CurrentLength Do not add space between words acosh hyperbolic arcus cosine function height placeholder גובע C1LengthSpl_ Left symbol _ in the name C2LengthSpl_ Left symbol _ in the name C1LengthSplPath Do not add symbol _ to the end of the name C2LengthSplPath Do not add symbol _ to the end of the name CurrentSeamAllowance Do not add space between words degTorad converts degrees to radian radTodeg converts radian to degrees sin sine function working with radians cos cosine function working with radians tan tangens function working with radians asin arcus sine function working with radians acos arcus cosine function working with radians atan arcus tangens function working with radians sinD sine function working with degrees cosD cosine function working with degrees tanD tangens function working with degrees asinD arcus sine function working with degrees acosD arcus cosine function working with degrees atanD arcus tangens function working with degrees M_ Left symbol _ in the name Increment_ Left symbol _ in the name ElArc_ Left symbol _ in the name Radius1ElArc_ Left symbol _ in the name Radius2ElArc_ Left symbol _ in the name Angle1ElArc_ Left symbol _ in the name Angle2ElArc_ Left symbol _ in the name r2cm round to up to 1 decimal csrCm cut, split and rotate modeling operation. Takes cm units. csrInch cut, split and rotate modeling operation. Takes inch units. RotationElArc_ Left symbol _ in the name converts degrees to radian functionm degTorad converts radian to degrees function radTodeg sine function working with radians function sin cosine function working with radians function cos tangens function working with radians function tan arcus sine function working with radians function asin arcus cosine function working with radians function acos arcus tangens function working with radians function atan hyperbolic sine function function sinh hyperbolic cosine function cosh hyperbolic tangens function function tanh hyperbolic arcus sine function function asinh hyperbolic arcus cosine function function acosh hyperbolic arcur tangens function function atanh sine function working with degrees function sinD cosine function working with degrees function cosD tangens function working with degrees function tanD arcus sine function working with degrees function asinD arcus cosine function working with degrees function acosD arcus tangens function working with degrees function atanD logarithm to the base 2 function log2 logarithm to the base 10 function log10 logarithm to the base 10 function log logarithm to base e (2.71828...) function ln e raised to the power of x function exp square root of a value function sqrt sign function -1 if x<0; 1 if x>0 function sign round to nearest integer function rint round to up to 1 decimal function r2cm cut, split and rotate modeling operation. Takes cm units. function csrCm cut, split and rotate modeling operation. Takes inch units. function csrInch absolute value function abs min of all arguments function min max of all arguments function max sum of all arguments function sum mean value of all arguments function avg Returns the floating-point remainder of numer/denom (rounded towards zero) function fmod warning Calculation warning Show a warning in calculations function warning VValentinaSettings layouts VWidgetDetails Form Unnamed Select all Select none select all details select none details Invert selection invert selection Hide not in layout Piece options Delete piece Cannot find piece by id '%1' VWidgetGroups Delete למחוק Hide Show Hide All Show All Tags: Separate each tag with comma. Filter by tags Preferences Categories: %1. VisToolCubicBezierPath Curved path: select seven or more points Curved path: select more points for complete segment Curved path: select seven or more points, %1 - finish creation VisToolCurveIntersectAxis Intersection curve and axis: angle = %1°; %2 - sticking angle, %3 - finish creation VisToolEndLine Point at distance and angle: angle = %1°, length = %2%3; %4 - sticking angle, %5 - finish creation VisToolLineIntersectAxis Intersection line and axis: angle = %1°; %2 - sticking angle, %3 - finish creation VisToolMove Length = %1%2, angle = %3°, %4 - sticking angle, Mouse click - finish selecting a position Length = %1%2, angle = %3°, rotation angle = %4°, %5 - sticking angle, %6 - change rotation origin point, Mouse click - finish creating VisToolRotation Rotating angle = %1°, %2 - sticking angle, Mouse click - finish creation VisToolSpline Use %1 for sticking angle! VisToolSplinePath Curved path: select three or more points Curved path: select three or more points, %1 - finish creation Use %1 for sticking angle! WatermarkWindow Watermark Opacity: Text Text: watermark text Rotation: Font: The quick brown fox jumps over the lazy dog Use native text to test a font options Edit font Image Path: path to image Browse… Gray color &File Operations Save שמור Save &As… E&xit Open New חדש Images Watermark image File error. Watermark files Save as שמירה בשם watermark Failed to lock. This file already opened in another window. Could not save file Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. The document has no write permissions. Cannot set permissions for %1 to writable. Could not save the file. Could not save the file Open file Unsaved changes The watermark has been modified. Do you want to save your changes? Don't Save read only untitled.vwm Confirm format rewriting This file is using previous format version v%1. The current is v%2. Saving the file with this app version will update the format version for this file. This may prevent you from be able to open the file with older app versions. Do you really want to continue? File saved Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). Do you want to change the premissions? mNoisyHandler DEBUG: WARNING: CRITICAL: FATAL: INFO: Warning Critical error Fatal error Information vNoisyHandler DEBUG: WARNING: CRITICAL: FATAL: INFO: Warning Critical error Fatal error Information