AddBackgroundImage add background image AddGroup add group AddItemToGroup Add item to group AddPatternPiece add pattern piece %1 AddPiece add detail AddToCalc add object ChangeGroupOptions rename group ChangeGroupVisibility change group visibility ChangeMultipleGroupsVisibility change multiple groups visibility ColorPickerPopup Custom CommunityPage Server Palvelin Server name/IP Palvelimen nimi/IP Secure connection Suojattu yhteys Proxy settings Välittävän palvelimen asetukset Use Proxy Käyttäjä välittäjäpalvelinta Proxy address Välittäjäpalvelimen osoite Proxy port Välittäjäpalvelimen portti Proxy user Välittäjäpalvelimen käyttäjätunnus Proxy pass Välittäjäpalvelimen salasana User settings Käyttäjän asetukset User Name Käyttäjätunnus Save password Tallenna salasana Password Salasana ConfigDialog Apply Toteuta &Cancel &Peru &Ok %Ok Config Dialog Konfigurointi dialogi Configuration Asetukset Pattern Kaava Community Yhteisö Paths Polut ConfigurationPage Setup user interface language updated and will be used the next time start Asetusten käyttöliittymän kieli päivitetty. Päivitys otetaan käyttöön uudelleen käynnistyksen jälkeen. Default unit updated and will be used the next pattern creation Oletusarvoinen yksikkö päivitetty ja otetaan käyttöön seuraavan kaavan luonnin yhteydessä Save Tallenna Auto-save modified pattern Tallenna automaattisesti muokattu kaava min min Interval: Väli: Language Kieli GUI language GUI kieli Decimal separator parts Desimaalierotin osat With OS options (%1) Käyttäen käyttöjärjestelmä asetusta (%1) Default unit Oletusarvoinen mittayksikkö Centimeters senttimetriä Millimiters millimetriä Inches tuumaa Label language Nimilappujen kieli Send crash reports Lähetä kaatumisraportteja Send crash reports (recommended) Lähetä kaatumisraportteja (suositus) After each crash Valentina collect information that may help us fix a problem. We do not collect any personal information. Find more about what <a href="https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports">kind of information</a> we collect. Valentina kerää tietoa jokaisesta ohjelman kaatumisesta. Ohjelma ei kerää henkilökohtaisia tietoja. Lisätietoa kerätystä <a href="https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports">tiedosta. </a> Pattern Editing Kaavan muuttaminen Confirm item deletion Varmista kohdan poistaminen DelGroup delete group DelTool delete tool DeleteBackgroundImage delete background image DeletePatternPiece delete pattern piece %1 DeletePiece delete tool DialogAboutApp About Valentina Tietoja Valentinasta Valentina version Valentina versio Contributors Avustajat Built on %3 at %4 Käännetty %3 klo %4 Web site : %1 Kotisivu: %1 Cannot open your default browser Oletus selaimen aukaiseminen epäonnistui Build revision: Käännös versio: Built on %1 at %2 Käännetty %3 klo %2 {1 ?} Check For Updates DialogAboutTape About Tape Tape version Build revision: Käännös versio: This program is part of Valentina project. Build revision: %1 Built on %3 at %4 Käännetty %3 klo %4 Web site : %1 Kotisivu: %1 Cannot open your default browser Oletus selaimen aukaiseminen epäonnistui Built on %1 at %2 Käännetty %3 klo %2 {1 ?} Check For Updates DialogAddBackgroundImage Background image Name: Nmi: Determine should an image built in or added as path to the file. Built in DialogAlongLine Length Pituus Value of length Pituuden arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Point label Pistenimilappu First point Ensimmäinen piste First point of line Viivan ensimmäinen piste Second point Toinen piste Second point of line Viivan toinen piste Type of line Viivan tyyppi Show line from first point to this point Näytä viiva ensimmäisestä pisteestä tähän pisteeseen Select second point of line Valitse viivan toinen piste Point at distance along line Piste viivaa pitkin Line color Viivan väri Edit length Length: Formula wizard Value Arvo Calculation Point label: First point: First point of the line Second point: Second point of the line Type of line: Line color: Unique label Choose unique label. Tool Työkalu Notes DialogArc Arc Kaari Radius Säde Value of radius Säteen arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> First angle Ensimmäinen kulma Value of first angle Ensimmäisen kulman arvo Second angle Toinen kulma Value of second angle Toisen kulma arvo Center point Keskipiste Select point of center of arc Valitse kaaren keskipiste Error Virhe Radius can't be negative Säde ei voi olla negatiivinen Angles equal Yhtäsuuret kulmat Color Väri Edit radius Edit first angle Edit second angle Radius: Formula wizard Value Arvo First angle: Calculation Second angle: Center point: Select center point of the arc Color: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Tool Työkalu Alias: Notes DialogArcWithLength Dialog Radius Säde Value of radius Säteen arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> First angle Ensimmäinen kulma Value of first angle Ensimmäisen kulman arvo Length Pituus Arc length Kaaren pituus Center point Keskipiste Select point of center of arc Valitse kaaren keskipiste Color Väri Edit radius Edit the first angle Edit the arc length Error Virhe Radius can't be negative Säde ei voi olla negatiivinen Radius: Formula wizard Value Arvo Calculation First angle: Length: Center point: Color: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Tool Työkalu Alias: Notes DialogBisector Length Pituus Value of length Pituuden arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Point label Pistenimilappu First point Ensimmäinen piste First point of angle Kulman ensimmäinen piste Second point Toinen piste Second point of angle Kulman toinen piste Third point Kolmas piste Third point of angle Kulman kolmas piste Type of line Viivan tyyppi Show line from second point to this point Näytä viiva toisesta pisteestä tähän pisteeseen Select second point of angle Valiste kulman toinen piste Select third point of angle Valitse kulman kolmas piste Point along bisector Piste puolikasta pitkin Line color Viivan väri Edit length Length: Formula wizard Value Arvo Calculation Point label: Unique label Choose unique label. First point: Second point: Third point: Type of line: Line color: Tool Työkalu Notes DialogCubicBezier Color: Name: Nmi: First point: Second point: Third point: Fourth point: Select the second point of curve Select the third point of curve Select the fourth point of curve Invalid spline Tool cubic bezier Pen Style: Approximation Scale: Set approximation scale for this curve, 0 - use global value Tool Työkalu Alias: Notes DialogCubicBezierPath Point: List of points Lista pisteistä Color: Name: Nmi: Invalid spline path Tool cubic bezier path Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Cannot find point with id %1 Tool Työkalu Alias: Notes DialogCurveIntersectAxis Angle Kulma Value of angle Kulman arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Axis point Akselipiste Curve Käyrä Point label Pistenimilappu Type of line Viivan tyyppi Show line from first point to this point Näytä viiva ensimmäisestä pisteestä tähän pisteeseen Select axis point Valitse Akselipiste Point intersect curve and axis Käyrän ja akselin leikkauspiste Axis Point Akselipiste Line color Viivan väri Edit angle Angle: Formula wizard Value Arvo Calculation Axis point: Curve: Point label: Unique label Choose unique label. Type of line: Line color: Tool Työkalu Notes Alias1: Alias2: DialogCutArc Length Pituus Value of length Pituuden arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Arc Kaari Point label Pistenimilappu Segment an arc Kaaren segmentti Selected arc Valitse kaari Color Väri Edit length Length: Formula wizard Value Arvo Calculation Arc: Point label: Unique label Choose unique label. Tool Työkalu Alias1: Alias2: Notes DialogCutSpline Length Pituus Value of length Pituuden arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Curve Käyrä Selected curve Valitse käyrä Point label Pistenimilappu Segmenting a simple curve Jaa segmentteihin yksinkertainen käyrä Color Väri Edit length Length: Formula wizard Value Arvo Calculation Curve: Point label: Unique label Choose unique label. Tool Työkalu Alias1: Alias2: Notes DialogCutSplinePath Length Pituus Value of length Pituuden arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Curve Käyrä Selected curve path Valitse käyräpolku Point label Pistenimilappu Segment a curved path Jaa käyrä segmentteihin Color Väri Edit length Length: Formula wizard Value Arvo Calculation Curve: Point label: Unique label Choose unique label. Tool Työkalu Alias1: Alias2: Notes DialogDateTimeFormats Label date time editor Format: Insert a format <empty> DialogDetail Detail Yksityiskohta Bias X Vinouma X cm cm Bias Y Vinouma Y Options Asetukset Name of detail Yksityiskohdan nimi Seam allowance Saumavara Width Leveys Closed Suljettu Delete Poista Got wrong scene object. Ignore. Väärä kohde. Älä välitä. Reverse Käännä päinvastoin Seam allowance tool Saumavara työkalu ... ... Width: Leveys: DialogDimensionCustomNames Dimension custom names Name Nimi Custom Name DialogDimensionLabels Dimension labels Dimension: Value Arvo Label DialogDuplicateDetail Dialog duplicate detail Click to place duplicate DialogEditLabel Edit label template Clear current and begin new label Import from label template Export label as template Edit Muokkaa Bold Font formating Italic Font formating Aligns with the left edge Centers horizontally in the available space Aligns with the right edge Additional font size. Use to make a line bigger. Text: Line of text Insert placeholders Preview <empty> Create new template Creating new template will overwrite the current, do you want to continue? Label template Export label template template Could not save file Tiedostoa ei voitu tallentaa Import template Import template will overwrite the current, do you want to continue? File error. Tiedostovirhe. Date Time Pattern name Pattern number Company name or designer name Customer name Pattern extension Pattern file name Measurments file name Measurments extension Piece letter Piece annotation Piece orientation Piece rotation Piece tilt Piece fold position Piece name Quantity Material: Fabric Fabric Material: Lining Lining Material: Interfacing Interfacing Material: Interlining Interlining Word: Cut Cut Word: on fold on fold User material Insert… Move on top Move up Move down Move on bottom Measurements units Pattern units Size units Customer birth date Customer email Height dimension Pituus Size dimension Koko Hip dimension Waist dimension Measurement: %1 Height label dimension Size label dimension Hip label dimension Waist label dimension Final measurement: %1 No data for the height dimension. No data for the size dimension. No data for the hip dimension. No data for the waist dimension. DialogEditWrongFormula Edit formula Muuta matemaattista kaavaa Formula Matemaattinen kaava Insert variable into formula Lisää muuttuja kaavaan Value of first angle Ensimmäisen kulman arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Input data Lisää dataa Size and height Koko ja korkeus Measurements Mitat Increments Lisäys Length of lines Viivan pituus Length of arcs Kaarenpituus Length of curves Polun pituus Angle of lines Viivojen kulma Hide empty measurements Piilota tyhjät mittaukset Height Pituus Size Koko Line length Viivan pituus Arc length Kaaren pituus Curve length Käyrän pituus Line Angle Viiva kulma Radius of arcs Angles of curves Arc radius Curve angle Formula: Value Arvo Calculation Name Nimi Full name Functions Lengths to control points Filter list by keyword Preview calculations DialogEllipticalArc Radius1: Formula wizard Value Arvo Calulation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Radius2: First angle: Calculation Second angle: Rotation angle: Center point: Select center point of the arc Color: Edit radius1 Edit radius2 Edit first angle Edit second angle Edit rotation angle Elliptical arc Pen style: Tool Työkalu Alias: Notes DialogEndLine Length Pituus Value of length Pituuden arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Angle Kulma Value of angle Kulman arvo Base point Alkupiste First point of line Viivan ensimmäinen piste Point label Pistenimilappu Type of line Viivan tyyppi Show line from first point to this point Näytä viiva ensimmäisestä pisteestä tähän pisteeseen Point at distance and angle Piste viivaa pitkin Line color Viivan väri Edit angle Edit length Length: Formula wizard Value Arvo Calculation Angle: Base point: Point label: Unique label Choose unique label. Type of line: Line color: Tool Työkalu Notes DialogExportToCSV With header Codec: Separator Tab Comma Semicolon Space Options Asetukset Preview Global Options DialogFinalMeasurements Final measurements Search Name Nimi The calculated value Laskettu arvo Formula Matemaattinen kaava Details Yksityiskohdat Name: Nmi: Calculated value: Formula: Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Formula wizard Description: Move measurement up Move measurement down measurement Error Virhe Empty field. Edit measurement Empty field Tyhjä sarake Invalid result. Value is infinite or NaN. Please, check your calculations. Value Arvo Parser error: %1 Jäsentämis virhe: %1 <html><head/><body>Search history %1</body></html> Alt+Down 0 results <html><head/><body>Match Case %1</body></html> <html><head/><body>Match words %1</body></html> <html><head/><body>Match with regular expressions %1</body></html> <html><head/><body>Use unicode properties %1 The meaning of the \w, \d, etc., character classes, as well as the meaning of their counterparts (\W, \D, etc.), is changed from matching ASCII characters only to matching any character with the corresponding Unicode property. For instance, \d is changed to match any character with the Unicode Nd (decimal digit) property; \w to match any character with either the Unicode L (letter) or N (digit) property, plus underscore, and so on. This option corresponds to the /u modifier in Perl regular expressions.</body></html> Alt+U <html><head/><body>Find Previous %1</body></html> Shift+F3 <html><head/><body>Find Next %1</body></html> F3 DialogFlippingByAxis Origin point: Suffix: Axis type: Select origin point Select origin point that is not part of the list of objects Vertical axis Horizontal axis Flipping by axis Enable to create a visibility gropup from original objects Visibility Group Name: Nmi: Rotation Tags: Separate each tag with comma. Add tags Tool Työkalu Alias: Pen style: Color: Ready Notes Invalid suffix Invalid group name Label: Default Oletus Invalid point Invalid label Invalid alias DialogFlippingByLine First line point: Suffix: Second line point: Select first line point Select first line point that is not part of the list of objects Select second line point Select second line point that is not part of the list of objects Flipping by line Enable to create a visibility gropup from original objects Visibility Group Name: Nmi: Rotation Tags: Separate each tag with comma. Add tags Tool Työkalu Alias: Pen style: Color: Ready Notes Invalid suffix Invalid group name Label: Default Oletus Invalid line points Invalid first line point Invalid second line point Invalid label Invalid alias DialogGroup Group Group name: Choose group name New group Tags: Separate each tag with comma. Add tags DialogHeight Point label Pistenimilappu Base point Alkupiste First point of line Viivan ensimmäinen piste Second point of line Viivan toinen piste Type of line Viivan tyyppi Show line from first point to our point Näytä viiva ensimmäisestä pisteestä tähän pisteeseen Select first point of line Valitse viivan ensimmäinen piste Select second point of line Valitse viivan toinen piste Perpendicular point along line Kohtisuorapiste viivaa pitkin Base Point Alkupiste Line color Viivan väri Point label: Unique label Choose unique label. Base point: First point of line: Second point of line: Type of line: Line color: Tool Työkalu Notes DialogHistory History Historia Tool Työkalu Can't create record. Ohjelma ei pystynyt luomaan tietuetta. %1 - Base point %1 - Alkupiste %1_%2 - Line from point %1 to point %2 %1_%2 - Viiva pisteestä %1 pisteeseen %2 %3 - Point along line %1_%2 %3 - Piste viivaa %1_%2 pitkin %1 - Point of shoulder %1 - Olkapääpiste %3 - normal to line %1_%2 %3 - normaali viivaan %1_%2 %4 - bisector of angle %1_%2_%3 %4 - puolikkaan kulma %1_%2_%3 %5 - intersection of lines %1_%2 and %3_%4 %5 - viivojen leikkaus %1_%2 and %3_%4 Curve %1_%2 Käyrä %1_%2 Arc with center in point %1 Kaari jonka keskipiste on %1 Curve point %1 Käyrän piste %1 %4 - point of contact of arc with the center in point %1 and line %2_%3 %4 - Kaaren, jonka keskipiste on %1, kontaktipiste viivan %2_%3 kanssa Point of perpendicular from point %1 to line %2_%3 Kohtisuora viiva pisteestä %1 viivaan %2_%3 Triangle: axis %1_%2, points %3 and %4 Kolmio: akseli %1_%2, pisteissä %3 ja %4 %1 - point of intersection %2 and %3 %1 - leikkauspiste %2 ja %3 %1 - cut arc with center %2 %1 - leikkaa kaari keskipisteessä %2 %1 - cut curve %2_%3 %1 - Leikkaa käyrä %2_%3 %1 - cut curve path %2 %1 - Leikkaa käyrän polku %2 %1 - point of intersection line %2_%3 and axis through point %4 %1 - viivan %2_%3 ja akselin %4 %1 - point of intersection curve and axis through point %2 %1 - käyrän ja akselin leikkaus pisteessä %2 %1 - point of arcs intersection %1 - point of circles intersection %1 - point from circle and tangent %1 - point from arc and tangent Correction the dart %1_%2_%3 %1 - point of curves intersection Curve Käyrä Cubic bezier curve Arc Kaari %1 with length %2 Spline path Cubic bezier curve path %1 - cut %2 arc curve curve path Elliptical arc Rotate objects around point %1. Suffix '%2' Flipping by line %1_%2. Suffix '%3' Flipping by axis through %1 point. Suffix '%2' Move objects. Suffix '%1' <html><head/><body>Search history %1</body></html> Alt+Down Search 0 results <html><head/><body>Match Case %1</body></html> <html><head/><body>Match words %1</body></html> <html><head/><body>Match with regular expressions %1</body></html> <html><head/><body>Use unicode properties %1 The meaning of the \w, \d, etc., character classes, as well as the meaning of their counterparts (\W, \D, etc.), is changed from matching ASCII characters only to matching any character with the corresponding Unicode property. For instance, \d is changed to match any character with the Unicode Nd (decimal digit) property; \w to match any character with either the Unicode L (letter) or N (digit) property, plus underscore, and so on. This option corresponds to the /u modifier in Perl regular expressions.</body></html> Alt+U <html><head/><body>Find Previous %1</body></html> Shift+F3 <html><head/><body>Find Next %1</body></html> F3 DialogIncrements Increments Lisäys Name Nimi The calculated value Laskettu arvo Lines Viivat Line Viiva Length Pituus Curve Käyrä Arc Kaari Tables of Variables Muuttujien taulukko Lines angles Angle Kulma Lengths curves Angles curves Radiuses arcs Radius Säde Formula Matemaattinen kaava Details Yksityiskohdat Move measurement up Move measurement down Name: Nmi: Calculated value: Formula: <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Description: Error Virhe Empty field. Empty field Tyhjä sarake Value Arvo Parser error: %1 Jäsentämis virhe: %1 Edit increment Unique increment name Calculation Formula wizard Search Curves control point lengths Invalid result. Value is infinite or NaN. Please, check your calculations. Refresh a pattern with all changes you made Refresh Preview calculations Unique variable name Increment Separator <html><head/><body>Search history %1</body></html> Alt+Down 0 results <html><head/><body>Match Case %1</body></html> <html><head/><body>Match words %1</body></html> <html><head/><body>Match with regular expressions %1</body></html> <html><head/><body>Use unicode properties %1 The meaning of the \w, \d, etc., character classes, as well as the meaning of their counterparts (\W, \D, etc.), is changed from matching ASCII characters only to matching any character with the corresponding Unicode property. For instance, \d is changed to match any character with the Unicode Nd (decimal digit) property; \w to match any character with either the Unicode L (letter) or N (digit) property, plus underscore, and so on. This option corresponds to the /u modifier in Perl regular expressions.</body></html> Alt+U <html><head/><body>Find Previous %1</body></html> Shift+F3 <html><head/><body>Find Next %1</body></html> F3 DialogInsertNode Piece: The list of pieces is empty. Please, first create at least one piece for current pattern piece. Insert nodes Delete Poista Number: DialogKnownMaterials Known materials Material: Name of material User material DialogLayoutProgress Couldn't prepare data for creation layout Ei voitu luoda dataa somittelun luomiseen Several workpieces left not arranged, but none of them match for paper Useita osia ei voitu järjestää koska ne ei mahdu paperille Create a Layout Nesting. Please, wait. Time left: Time left: %1 Efficiency coefficient: %1% DialogLayoutScale Layout scale Margins Left: cm cm Right: Top: Bottom: Scale Horizontal: Vertical: DialogLayoutSettings Paper size Paperin koko Templates: Mallit: Width: Leveys: Height: Korkeus: Rotate workpiece Käännä kaavaa Rotate by Käännä degree aste Creation options Luomisasetukset Shift length: Siirron pituus: Principle of choosing the next workpiece Seuraavan kaavan valintaperiaate Three groups: big, middle, small Kolme ryhmää: iso, keskikokoinen, pieni Two groups: big, small Kaksi ryhmää: iso, pieni Descending area Laskeva alue Millimiters Millimetriä Centimeters Senttimetriä Inches Tuumaa Pixels Pikseliä Create a layout Luo sommittelu Auto crop unused length Unite pages (if possible) Gap width: Save length of the sheet Paper format Left: Right: Top: Bottom: Wrong fields. Three groups: big, middle, small = 0; Two groups: big, small = 1; Descending area = 2 Layout options Rule for choosing the next workpiece Divide into strips Multiplier Set multiplier for length of the biggest workpiece in layout. Enabling for sheets that have big height will speed up creating. Printer: None Printer Text Text will be converted to paths Export text as paths Margins Ignore margins Margins go beyond printing. Apply settings anyway? Follow grainline Time: Time given for the algorithm to find best layout. Efficiency: Manual priority Nest quantity of copies according to piece settings. Nest quantity Auto crop unused width Prefer one sheet solution min minutes Enable this option to prefer getting one sheet solutions. Set layout efficiency coefficient. Layout efficiency coefficientt is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. DialogLine First point Ensimmäinen piste Second point Toinen piste Type of line Viivan tyyppi Show line from first point to this point Näytä viiva ensimmäisestä pisteestä tähän pisteeseen Select second point Valitse toinen piste Line between points Pisteiden välinen viiva Line color Viivan väri First point: Second point: Type of line: Line color: Tool Työkalu Notes DialogLineIntersect Point label Pistenimilappu First line Ensimmäinen viiva First point Ensimmäinen piste Second point Toinen piste Second line Toinen viiva Select second point of first line Valitse ensimmäisen viivan toinen piste Select first point of second line Valitse toisen viivan ensimmäinen piste Select second point of second line Valitse toisen viivan toinen piste Point at line intersection Viivojen leikkauspiste Point label: Unique label Choose unique label. First point: Second point: Tool Työkalu Notes DialogLineIntersectAxis Angle Kulma Value of angle Kulman arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Axis point Akselipiste First point of line Viivan ensimmäinen piste First line point Viivan ensimmäinen piste Second line point Viivan toinen piste Point label Pistenimilappu Type of line Viivan tyyppi Show line from first point to this point Näytä viiva ensimmäisestä pisteestä tähän pisteeseen Select second point of line Valitse viivan toinen piste Select axis point Valitse Akselipiste Point intersect line and axis Viivan ja akselin leikkauspiste Axis Point Akselipiste Second point of line Viivan toinen piste Line color Viivan väri Edit angle Angle: Formula wizard Value Arvo Calculation Axis point: First line point: Second line point: Point label: Unique label Choose unique label. Type of line: Line color: Tool Työkalu Notes DialogMDataBase Measurement data base Measurements Mitat Direct Height Measurement section Direct Width Measurement section Indentation Measurement section Circumference and Arc Measurement section Vertical Measurement section Horizontal Measurement section Bust Measurement section Balance Measurement section Arm Measurement section Leg Measurement section Crotch and Rise Measurement section Hand Measurement section Foot Measurement section Head Measurement section Men & Tailoring Measurement section Historical & Specialty Measurement section Patternmaking measurements Measurement section Collapse All Expand All Check all Uncheck all Search: Search Select measurement DialogMeasurementsCSVColumns Setup columns Preview Input Import Columns Full name: Description: Ready Name measurement column Nimi Value measurement column Arvo Full name measurement column Description measurement column Kuvaus Base value measurement column Alkuarvo Shift (%1): measurement column Skip Name Nimi Value Arvo Base value Alkuarvo Shift (%1)*: File path is empty Not enough columns Not enough data to import Please, select unique number for each column DialogMove Angle: Formula wizard Value Arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Length: Suffix: Edit angle Edit length Calculation Move Rotation angle: Edit rotation angle Rotation origin point: Center point Keskipiste Enable to create a visibility gropup from original objects Visibility Group Name: Nmi: Rotation Tags: Separate each tag with comma. Add tags Tool Työkalu Alias: Pen style: Color: Ready Notes Invalid suffix Invalid group name Label: Default Oletus Invalid angle formula Invalid rotation angle formula Invalid length formula Invalid label Invalid alias DialogNewMeasurements New measurement file Measurement type: Unit: Individual Yksilö Centimeters Senttimetriä Millimiters Millimetriä Inches Tuumaa Multisize DialogNewPattern Individual measurements Yksilölliset mitat Pattern piece name Kaavan osan nimi Units: Mittayksiköt: Centimeters Senttimetriä Millimiters Millimetriä Inches Tuumaa Pattern piece name: Unique pattern piece name Choose unique pattern piece name. New pattern DialogNormal Length Pituus Value of length Pituuden arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Point label Pistenimilappu First point Ensimmäinen piste Second point Toinen piste Additional angle degrees Kulman lisäasteet Type of line Viivan tyyppi Show line from first point to this point Näytä viiva ensimmäisestä pisteestä tähän pisteeseen Select second point of line Valitse viivan toinen piste Point along perpendicular Piste kohtisuoraa pitkin First point of line Viivan ensimmäinen piste Second point of line Viivan toinen piste Line color Viivan väri Edit length Length: Formula wizard Value Arvo Calculation Point label: Unique label Choose unique label. First point: Second point: Additional angle degrees: Type of line: Line color: Tool Työkalu Notes DialogPatternMaterials Dialog Placeholder Value Arvo DialogPatternProperties Pattern properties Kaavan asetukset Description Kuvaus Author name Tekijän nimi Pattern description Kaavan kuvaus For technical notes. Muistiinpanoja. Heights and Sizes Pituudet ja koot All heights (cm) Kaikki pituudet (cm) All sizes (cm) Kaikki koot (cm) Height: Korkeus: Security Open only for read Call context menu for edit No image Delete image Change image Save image to file Show image Image for pattern untitled nimetön Path: Polku: Show in Explorer <Empty> File was not saved yet. Show in Finder Pattern Kaava For technical notes Label language: Passmark length: Invalid image. Error: %1 Unable to save image. Error: %1 Save Image Unable to show image. Error: %1 Unable to open temp file DialogPatternXmlEdit XML Editor XML editori Value : Arvo: Name : Nimi : <No selection> <No selection> Type : Tyyppi : Add attribute Lisää attribuutti Remove attribute Poista attribuutti Remove node Poista solmu Set Aseta Cancel Peruuta Apply changes Lisää muutokset Undo last Peru edellinen Immediate apply Lisää heti Base selection Alku valista All pattern pieces Kaikki kaavan osat No changes Ei muutoksia Cannot delete previously created node Edellistä solmua ei voitu poistaa No changes left Ei muutoksia jäljellä Cannot undo change Ei voi perua muutosta <no value> <ei arvoa> Unchanged Ei muutettu Cannot delete previously created attribute Edellistä attribuuttia ei voitu poistaa Node Name Solmun nimi Name: Nmi: Node Value (may be empty) Solmun arvo (voi olla tyhjä) Value: Arvo: Attribute Name Attribuutin nimi Attribute Value Attribuutin arvo No selection Ei valintaa Root node Juurisolmu Node Solmu Attribute Attribuutti DialogPiecePath Piece path tool Path Polku Name: Nmi: Unnamed path Create name for your path Type: Piece: Type of pen: Ready! Seam allowance Saumavara Width: Leveys: Formula wizard Value Arvo Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Nodes Node: Before: Return to default width Default Oletus After: Angle: Reverse Käännä päinvastoin Delete Poista Edit seam allowance width Edit seam allowance width before Edit seam allowance width after Internal path Custom seam allowance You need more points! First point of custom seam allowance cannot be equal to the last point! You have double points! Passmarks Passmark: One line Two lines Three lines Angle Kulma Straightforward Bisector Passmark Marks T mark V mark Please, select a detail to insert into! List of details is empty! Select if need designate the corner point as a passmark Intersection Each point in the custom seam allowance path must be unique! Cut on fabric Select if need designate the corner point as a passmark. Show only left passmark. Intersection (only left) Select if need designate the corner point as a passmark. Show only right passmark. Intersection (only right) Control Visible Create a formula that regulates visibility. Values different from "0" make a path visible. 1 Control visibility Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Check uniqueness Move on top Move up Move down Move on bottom Continue the first point to the cutting contour Continue the last point to the cutting contour The path is a cut contour. Use to control export to DXF-AAMA The list of pieces is empty. Please, first create at least one piece for current pattern piece. This option has effect only if the second passmark on seam line enabled in global preferences. The option helps disable the second passmark for this passmark only. Show the second passmark on seam line Excluded The same curve repeats twice! <Empty> Current seam allowance Acute angle that looks inside of piece Acute angle that looks outside of piece V mark 2 Select main path objects, %1 - reverse direction curve, %2 - finish creation Manual length Length: U mark Box mark Edit passmark length Invalid segment! DialogPin Pin tool Point: Piece: Pin The list of pieces is empty. Please, first create at least one piece for current pattern piece. DialogPlaceLabel Width: Leveys: Formula wizard Value Arvo Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Height: Korkeus: Angle: 0 Point: Piece: Type: Edit rectangle width Edit angle Segment Rectangle Cross T-shaped Doubletree Corner Triangle H-shaped Button Place label Control Visible Create a formula that regulates visibility. Values different from "0" make a path visible. 1 The list of pieces is empty. Please, first create at least one piece for current pattern piece. Control visibility Circle DialogPointFromArcAndTangent Point from arc and tangent Point label Pisteen nimi Arc Kaari Select point of center of arc Valitse kaaren keskipiste Select an arc Point label: Unique label Choose unique label. Tangent point: Arc: Take: Tool Työkalu Notes DialogPointFromCircleAndTangent Point from circle and tangent Radius Säde <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Point label Pisteen nimi Select point of center of arc Valitse kaaren keskipiste Select a circle center Edit radius Error Virhe Radius can't be negative Säde ei voi olla negatiivinen Radius: Formula wizard Value Arvo Calculation Point label: Unique label Choose unique label. Center of the circle: Tangent point: Take: Tool Työkalu Notes DialogPointOfContact Radius Säde Value of radius Säteen arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Point label Pistenimilappu Center of arc Kaaren keskipiste Select point of center of arc Valitse kaaren keskipiste Top of the line Viivan yläosa End of the line Viiva päätepiste Select second point of line Valitse viivan toinen piste Point at intersection of arc and line Kaaren ja viivan leikkauspiste Edit radius Radius: Formula wizard Value Arvo Calculation Point label: Unique label Choose unique label. Center of arc: Top of the line: End of the line: Tool Työkalu Notes DialogPointOfIntersection Point label Pistenimilappu First point of angle Kulman ensimmäinen piste Second point of angle Kulman toinen piste Point from X and Y of two other points Piste kahdesta muusta pisteestä X: vertical point X: pystysuora piste Y: horizontal point Y: vaakasuora piste Select point for Y value (horizontal) Valitse piste Y arvolle (vaakasuora) Point label: Unique label Choose unique label. X: vertical point: Y: horizontal point: Tool Työkalu Notes DialogPointOfIntersectionArcs Point label Pisteen nimi Selected arc Valitse kaari Select second an arc Point label: Unique label Choose unique label. First arc: Second arc: Take: Tool point of intersetion arcs Tool Työkalu Notes DialogPointOfIntersectionCircles <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Point label Pisteen nimi Select point of center of arc Valitse kaaren keskipiste Select second circle center Edit first circle radius Edit second circle radius Error Virhe Radius can't be negative Säde ei voi olla negatiivinen Radius of the first circle: Formula wizard Value Arvo Calculation Radius of the second circle: Point label: Unique label Choose unique label. Center of the first circle: Center of the second circle: Take: Tool point of intersection circles Tool Työkalu Notes DialogPointOfIntersectionCurves Tool point of intersection curves First curve: Second curve: Point label: Unique label Choose unique label. Vertical correction: Horizontal correction: Select second curve Tool Työkalu Notes Curve 1 Alias1: Alias2: Curve 2 DialogPreferences Preferences Asetukset Configuration Asetukset Pattern Kaava Paths Polut Followed %n option(s) require restart to take effect: %1. DialogPuzzlePreferences Puzzle preferences Configuration Asetukset Paths Polut Followed %n option(s) require restart to take effect: %1. Layout Sommittelu DialogRestrictDimension Restrict dimension Dimension A: Restriction Min: Max: Exclude Include DialogRotation Rotation Angle: Formula wizard Value Arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Origin Point: Suffix: Edit angle Select origin point Calculation This point cannot be origin point. Please, select another origin point Enable to create a visibility gropup from original objects Visibility Group Name: Nmi: Tags: Separate each tag with comma. Add tags Tool Työkalu Alias Pen style: Color: Ready Notes Invalid suffix Invalid group name Invalid rotation point Invalid label Invalid alias Invalid angle formula Label: Alias: Default Oletus DialogSaveLAyout Save Layout File name: Path: Polku: File format: Destination folder Select path to destination folder File base name Path to destination folder Binary form Text as paths Margins Right: Left: Top: Bottom: Paper format Browse… cm cm Templates: Mallit: Orientation: Options Asetukset Scale Horizontal: Vertical: DialogSaveLayout Name conflict Nimikonflikti Folder already contain file with name %1. Rewrite all conflict file names? Example: Select folder Svg files (*.svg) Svg tiedostot (*.svg) PDF files (*.pdf) PDF tiedostot (*.pdf) Images (*.png) Kuvat (*.png) Wavefront OBJ (*.obj) Wavefront OBJ (*.obj) PS files (*.ps) PS tiedostot (*.ps) EPS files (*.eps) EPS tiedostot (*.eps) Tried to use out of range format number. Selected not present format. The destination directory doesn't exists or is not readable. The base filename does not match a regular expression. DialogSaveManualLayout Path: Polku: Destination folder Path to destination folder Select path to destination folder Browse… File format: Options Asetukset Binary form Text as paths Export unified Tiles scheme File name: File base name The base filename does not match a regular expression. Select folder Tried to use out of range format number. Selected not present format. The destination directory doesn't exists or is not readable. Name conflict Nimikonflikti Folder already contain file with name %1. Rewrite all conflict file names? Example: Save manual layout DialogSeamAllowance Ready! Value Arvo Detail Yksityiskohta Grainline Reverse Käännä päinvastoin Delete Poista Options Asetukset Error. Can't save piece path. Infinite/undefined result Length should be positive Parser error: %1 Jäsentämis virhe: %1 Current seam allowance Edit seam allowance width Edit seam allowance width before Edit seam allowance width after You need more points! You have to choose points in a clockwise direction! First point cannot be equal to the last point! You have double points! Empty main path custom seam allowance Both Just front Just rear Pins no pin Labels Error Virhe Edit length Edit angle Edit height Edit width Paths Polut Excluded Passmark Each point in the path must be unique! Passmarks Workpiece tool Segment Rectangle Cross T-shaped Doubletree Corner Triangle H-shaped Button Place label Check uniqueness To open all detail's features complete creating the main path. Please, press OK. The same curve repeats twice! <Empty> Select main path objects clockwise, %1 - reverse direction curve, %2 - finish creation Circle Edit passmark length The customer name from individual measurements The customer email from individual measurements The customer birth date from individual measurements Save label data. Label data were changed. Do you want to save them before editing label template? Height dimension Pituus Size dimension Koko Hip dimension Waist dimension Height label dimension Size label dimension Hip label dimension Waist label dimension Measurement: %1 Invalid segment! DialogSelectLanguage Select language Select user interface language Language: DialogSetupMultisize Setup multisize measurements Use full circumference Height dimension Pituus Min value: Minimal value described in the column Max value: Maximal value described in the column Step: Single-step between the column values Base: The base value for the column Size dimension Koko Circumference Please, select at least one dimension No more than 3 dimensions allowed Ready Custom name Name: Nmi: Please, provide correct data for dimension %1 Please, provide custom name for dimension %1 DialogShoulderPoint Length Pituus Value of length Pituuden arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Point label Pistenimilappu First point Ensimmäinen piste Second point Toinen piste Third point Kolmas piste Type of line Viivan tyyppi Show line from first point to our point Näytä viiva ensimmäisestä pisteestä tähän pisteeseen Select first point of line Valitse viivan ensimmäinen piste Select second point of line Valitse viivan toinen piste Special point on shoulder Olkapään erityispiste Line color Viivan väri Edit length Length: Formula wizard Value Arvo Calculation Point label: Unique label Choose unique label. First point: Second point: Third point: Type of line: Line color: Tool Työkalu Notes DialogSinglePoint Single point Toinen piste Coordinates on the sheet Arkin koordinaatit Coordinates Koordinaatit Y coordinate Y koordinaatti X coordinate X koordinaatti Point label Pistenimilappu Unique label Choose unique label. Tool Työkalu Notes DialogSpline First point Ensimmäinen piste Length ratio of the first control point Ensimmäisen kontrollipisteen pituussuhde The angle of the first control point Ensimmäisen kontrollipisteen kulma Second point Toinen piste Length ratio of the second control point Toisen kontrollipisteen pituussuhde The angle of the second control point Toisen kontrollipisteen kulma Coefficient of curvature of the curve Käyrän kaarevuuden kerroin Select last point of curve Valitse käyrän viimeinen piste Simple curve Yksinkertainen käyrä Color Väri Color: First point: Control point Angle: Second point: Name: Nmi: Invalid spline Length: Formula wizard Value Arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Edit first control point angle Edit second control point angle Edit first control point length Edit second control point length Calculation Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Tool Työkalu Alias: Notes DialogSplinePath Curved path Mutkikas käyrä Point of curve Käyrän piste Length ratio of the first control point Ensimmäisen kontrollipisteen pituussuhde The angle of the first control point Ensimmäisen kontrollipisteen kulma Length ratio of the second control point Toisen kontrollipisteen pituussuhde The angle of the second control point Toisen kontrollipisteen kulma List of points Lista pisteistä Coefficient of curvature of the curve Käyrän kaarevuuden kerroin Select point of curve path Valitse käyrän piste Color Väri Color: Point: First control point Angle: Second control point Name: Nmi: Invalid spline path Length: Formula wizard Value Arvo <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Edit first control point angle Edit second control point angle Edit first control point length Edit second control point length Not used Calculation Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Cannot find point with id %1 Tool Työkalu Alias: Notes DialogTapePreferences Preferences Asetukset Configuration Asetukset Paths Polut Followed %n option(s) require restart to take effect: %1. DialogTool Error Virhe Empty field Tyhjä sarake Value can't be 0 Arvo ei voi olla 0 Value Arvo Parser error: %1 Jäsentämis virhe: %1 First point Ensimmäinen piste Second point Toinen piste Highest point Lowest point Leftmost point Rightmost point by length by points intersetions by first edge symmetry by second edge symmetry by first edge right angle by second edge right angle DialogTriangle Point label Pistenimilappu First point of axis Viivan ensimmäinen piste First point of line Viivan ensimmäinen piste Second point of axis Viivan toinen piste First point Ensimmäinen piste Second point Toinen piste Select second point of axis Valitse akselin toinen piste Select first point Valitse ensimmäinen piste Select second point Valitse toinen piste Triangle tool Kolmio työkalu First point of the axis Akselin ensimmäinen piste Second point of the axis Akselin toinen piste Second point of line Viivan toinen piste Point label: Unique label Choose unique label. First point of axis: Second point of axis: First point: Second point: Tool Työkalu Notes DialogTrueDarts True darts First point of angle Kulman ensimmäinen piste Second point of angle Kulman toinen piste Third point of angle Kulman kolmas piste Show line from second point to this point Näytä viiva toisesta pisteestä tähän pisteeseen Select the second base point Select the first dart point Select the second dart point Select the third dart point First base point: Second base point: First dart point: Second dart point: Third dart point: First new dart point: Unique label Choose unique label. Second new dart point: Tool Työkalu Notes DialogUndo Broken formula Virheellinen matemaattinen kaava Error while calculation formula. You can try undo last operation or fix broken formula. Virhe kaava laskemisessa. Yritä perua viimeisin komento tai korjaa matemaattinen kaava &Undo &Peru &Fix formula &Korjaa matemaattinen kaava &Cancel &Peru Error while calculation formula. You can try to undo last operation or fix broken formula. DialogUnionDetails <html><head/><body>Do you really want union details?</body></html> <html><head/><body>Haluatko todella unionin yksityiskohdat?</body></html> Union tool Unioni työkalu Select a first point Valitse ensimmäinen piste Workpiece should have at least two points and three objects Työssä pitäisi olla ainakin kaksi pistettä ja kolme objektia Select a second point Valitse toinen piste Select a unique point Valitse yksikäsitteinen piste Select a detail Valitse yksityiskohta Select a point on edge Valitse reunapiste <html><head/><body>Do you really want to unite details?</body></html> Retain original pieces FvUpdateWindow Software Update %1 %2 is now available - you have %3. Would you like to download it now? Skip This Version Remind Me Later Get Update %1 update is available! New %1 test version is now available. Would you like to download it now? FvUpdater Cannot open your default browser. Feed download failed: %1. Feed parsing failed: %1 %2. No updates were found. Feed error: invalid "enclosure" with the download link HideAllBackgroundImages hide all background images show all background images HideBackgroundImage hide a background image show a background image HoldAllBackgroundImages hold all background images unhold background images HoldBackgroundImage hold background image unhold background image InternalStrings The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Ohjelma on saatavilla sellaisena kuin se on ilman mitään takuita, mukaan lukien suunnitelun, kaupallisuuden tai tiettyyn tarkoitukseen sopivuuden suhteen. MApplication Error parsing file. Program will be terminated. Jäsentämis virhe tiedostossa. Ohjelma lopetetaan. Error bad id. Program will be terminated. Väärä id. Ohjelma lopetetaan. Error can't convert value. Program will be terminated. Arvoa ei voi muuttaa. Ohjelma lopetetaan. Error empty parameter. Program will be terminated. Tyhjä parametri. Ohjelma lopetetaan. Error wrong id. Program will be terminated. Väärä id. Ohjelma lopetetaan. Something's wrong!! Joku on vialla!! Parser error: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. Valentina's measurements editor. The measurement file. Invalid base size argument. Must be cm, mm or inch. Can't begin to listen for incoming connections on name '%1' Test mode doesn't support openning several files. Please, provide one input file. Use for unit testing. Run the program and open a file without showing the main window. Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Set base for dimension A in the table units. The dimension A base Set base for dimension B in the table units. The dimension B base Set base for dimension C in the table units. The dimension C base Set pattern file units: cm, mm, inch. The pattern units Invalid dimension A base value. Invalid dimension B base value. Invalid dimension C base value. Formula warning: %1. Program will be terminated. MainWindow Valentina Valentina Tools for creating points. Työkaluja pisteiden luomiseen. Point Piste Point along perpendicular Piste kohtisuoraa pitkin Perpendicular point along line Kohtisuorapiste viivaa pitkin Point along bisector Piste puolikasta pitkin Point at distance and angle Piste viivaa pitkin Point at distance along line Piste viivaa pitkin Tools for creating lines. Työkaluja viivojen luomiseen. Line Viiva Line between points Pisteiden välinen viiva Point at line intersection Viivojen leikkauspiste Tools for creating curves. Työkaluja käyrien luomiseen. Curve Käyrä Tools for creating arcs. Työkaluja kaarien luomiseen. Arc Kaari Tools for creating details. Työkaluja yksityiskohtien luomiseen. Detail Yksityiskohta &File &Tiedosto &Help &Apua &Pattern piece &Kaavan osa Measurements Mitat Window Ikkuna Toolbar files Tiedostojen työkalupalkki ToolBar modes Moodien työkalupalkki Toolbar pattern Kaava työkalupalkki Toolbar options Asetus työkalupalkki Toolbar tools Työkalujen työkalupalkki Tool options Työkalu asetukset New Uusi &New &Uusi Create a new pattern Luo uusi kaava Open Avaa &Open &Avaa Open file with pattern Avaa tiedosto kaavan kanssa Save Talenna &Save &Tallenna Save pattern Tallenna kaava Save &As... Tallenna &nimellä... Save not yet saved pattern Tallenna tallentamaton kaava Draw Piirrä Details Yksityiskohdat Pointer tools Osointin työkalut New pattern piece Uusi kaavan osa Add new pattern piece Lisää uusi kaavan osa Change the label of pattern piece Muuta kaavan nimeä Table of variables Muuttujien taulukko Tables of variables Muuttujien taulukko History Historia About &Qt Tietoja &Qt &About Valentina &Tietoja Valentinasta E&xit L&opeta Exit the application Lopeta ohjelma Preferences Asetukset Pattern properties Kaavan asetukset Zoom in Tarkenna zoom in tarkenna Zoom out Loitonna Edit pattern XML code Muuta kaavan XML koodia Original zoom Alkuperäinen tarkennus Original Zoom Alkuperäinen tarkennus Zoom fit best Tarkenna sopivasti Stop Lopeta Stop using tool Lopeta työkalun käyttö Repot Bug... Ilmoita ohjelmistovirheestä... Report bug Ilmoita ohjelmistovirheestä Close window Sulje ikkuna Online help Online apua Show online help Näytä online apu Pattern piece %1 Kaavan osa %1 Select point Valitse piste Select first point Valitse ensimmäinen piste Select first point of line Valitse viivan ensimmäinen piste Select first point of angle Valitse kulman ensimmäinen piste Select first point of first line Valitse ensimmäisen viivan ensimmäinen piste Select first point curve Valitse ensimmäinen käyrän piste Select simple curve Valitse yksinkertainen käyrä Select point of center of arc Valitse kaaren keskipiste Select point of curve path Valitse käyrän piste Select curve path Valitse käyräpolku Select points, arcs, curves clockwise. Valitse pisteet, kaaret, käyrät myötäpäivään. Select base point Valitse alkupiste Select first point of axis Valitse akselin ensimmäinen piste Select detail Valitse yksityiskohta Select arc Valitse kaari Select curve Valitse käyrä About Qt Tietoja Qt:stä Height: Pituus: Size: Koko: Pattern Piece: Kaavan osa: Pattern files (*.val) Kaava tiedostot (*.val) pattern kaava Save as Talenna nimellä Could not save file Tiedostoa ei voitu tallentaa Open file Avaa tiedosto Error parsing file. Virhe tiedoston jäsennyksessä. Error can't convert value. Virhe: arvoa ei voi muuntaa. Error empty parameter. Virhe: tyhjä parametri. Error wrong id. Virhe: väärä id. Error parsing file (std::bad_alloc). Virhe tiedoston (std::bad_alloc) jäsennyksessä. Bad id. Väärä id. File saved Tiedosto tallennettu untitled.val nimetön.val The pattern has been modified. Do you want to save your changes? Kaavaa on muutettu Haluatko tallentaa muutokset? &Undo &Peru &Redo &Tee uudelleen Pattern piece: Kaavan osa: Enter a new label for the pattern piece. Syötä uusi nimi kaavan osalle. This file already opened in another window. Tämä tiedosto on jo avattu toiseen ikkunaan. Wrong units. Väärät yksiköt. Application doesn't support standard table with inches. Ohjelma ei tue standardi tauluja tuuma koossa. File error. Tiedostovirhe. File loaded Tiedosto ladattu Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina ei sulkeutunut oikein. Haluatko uudelleen avata tiedostot (%1)? Reopen files. Avaa uudelleen tiedosto. Standard measurements (*.vst) Standardi mitat (*.vst) Individual measurements (*.vit) Yksilölliset mitat (*.vit) Special point on shoulder Valitse olkapään erityispiste Triangle tool Kolmio työkalu Point at intersection of arc and line Kaaren ja viivan leikkauspiste Point from X and Y of two other points Piste kahdesta muusta pisteestä Point intersect line and axis Viivan ja akselin leikkauspiste Simple curve Yksinkertainen käyrä Curved path Mutkikas käyrä Segmenting a simple curve Jaa segmentteihin yksinkertainen käyrä Segment a curved path Jaa käyrä segmentteihin Point intersect curve and axis Kaaren ja akselin leikkauspiste Segment an arc Kaaren segmentti Point intersect arc and axis Kaaren ja akselin leikkauspiste Seam allowance tool Saumavara työkalu Union tool Unioni työkalu toolBar työkalupalkki Last Tool Viimeisin työkalu Activate last used tool again Aktivoi viimeksi käytetty työkalu uudestaan Select point for X value (vertical) Valitse piste arvolle X (pystysuora) Mode Pointer Config pattern piece Layout Sommittelu Show Curve Details Show/hide control points and curve direction Point of intersection arcs Point of intersection circles Point from circle and tangent Point from arc and tangent Arc with given length Settings Layout pages Sommittelu sivut Print Print tiled PDF Split and print a layout into smaller pages (for regular printers) Print preview Print preview original layout Export original layout Select first an arc Select point of the center of the arc Select the first base line point Detail mode Layout mode Unsaved changes Measurements loaded You can't export empty scene. Create new Layout Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Measurement file contains invalid known measurement(s). Measurement file has unknown format. Measurement files types have not match. Couldn't sync measurements. Couldn't update measurements. The measurements file '%1' could not be found. Loading measurements file The method %1 does nothing in GUI mode Export error. Please, provide one input file. Print an original layout Preview tiled PDF Print preview tiled layout <html><head/><body>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage "Details mode". Before you will be able to enable the "Details mode" need create at least one detail.</body></html> <html><head/><body>Mode for working with details. Before you will be able to enable the "Details mode" need create at least one detail on the stage "Draw mode". Details created on this stage will be used for creating a layout. </body></html> <html><head/><body>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage "Details mode". The layout can be exported to your prefered file format and saved to your harddirve.</body></html> Measurements unloaded Couldn't unload measurements. Some of them are used in the pattern. True darts New pattern Open pattern Create/Edit measurements Don't Save Point intersection curves Select first curve Curve tool which uses point as control handle Select first curve point Select point of cubic bezier path Operations Create new group Rotate objects Close pattern Tool pointer Midpoint between two points Group Contains all visibility groups Show which details will go in layout Original zoom Select first circle center Select point on tangent Pattern Piece: The measurements file %1 could not be found. Do you want to update the file location? Flipping objects by line Flipping objects by axis Move objects Measurements were changed. Do you want to sync measurements now? Measurements have been synced Tools for creating elliptical arcs. Elliptical Arc Select point of center of elliptical arc Select main path objects clockwise. Could not save the file read only Variables Table Contains information about increments and internal variables Load Individual Load Individual measurements file Load Multisize Load multisize measurements file Open Tape Edit Current Edit linked to the pattern measurements Sync Synchronize linked to the pattern measurements after change Unload Current Unload measurements if they were not used in a pattern file Individual measurements Yksilölliset mitat Multisize measurements Pattern files Pin tool Select pin point Insert node tool Open Tape app for creating or editing measurements file Export increments to CSV Name Nimi The calculated value Laskettu arvo Formula Matemaattinen kaava You can't use Detail mode yet. Please, create at least one workpiece. You can't use Layout mode yet. Please, create at least one workpiece. You can't use Layout mode yet. Please, include at least one detail in layout. You can't use Layout mode yet. Zoom fit best current zoom fit best current pattern piece Export details skiping the Layout stage You don't have enough details to export. Please, include at least one detail in layout. Export details Can't export details. Label template editor Workpiece tool Internal path tool Save &As… Report Bug… Export As… Save… Final measurements Export Final Measurements to CSV You can't export empty scene. Please, include at least one detail in layout. Export final measurements error. Destination path is empty. Next pattern piece Ctrl+PgDown Previous pattern piece Ctrl+PgUp Place label tool Duplicate detail tool Select placelabel center point The measurements file '%1' could not be found or provides not enough information. Use these tools to create a pattern Scale: Create new pattern piece to start working. Aloita luomalla uusi kaava. Changes applied. Cannot save settings. Access denied. Ctrl+O Cannot read settings from a malformed .INI file. Select path objects, %1 - reverse direction curve Select one or more objects, hold %1 - for multiple selection, %2 - finish creation Select one or more objects, hold %1 - for multiple selection, %2 - confirm selection Point of intersection circle and segment Increase label font Decrease label font Original label font Hide labels Groups of visibility Export recipe Recipe files recipe Could not save recipe. %1 Curved path tool which uses point as control handle Point of intersection arc and axis Show main path Globally show pieces main path Pattern messages Clear all messages Filter DEBUG WARNING CRITICAL FATAL INFO Auto refresh the list with each parse Watermark Load Remove Edit current Editor Create or edit a watermark Watermark files Manual Layout Open Puzzle Open the Puzzle app Create Create manual layout Update Update manual layout Unable to prepare raw layout data. Manual layout files Select manual layout Not supported dimension A value '%1' for this pattern file. Couldn't set dimension A. Need a file with multisize measurements. Couldn't set dimension A. File wasn't opened. Not supported dimension B value '%1' for this pattern file. Couldn't set dimension B. Need a file with multisize measurements. Couldn't set dimension B. File wasn't opened. Not supported dimension C value '%1' for this pattern file. Couldn't set dimension C. Need a file with multisize measurements. Couldn't set dimension C. File wasn't opened. Could not create recipe file. %1 Shop Scalable Vector Graphics files Save draw Draw export Background images Add background image Unable to add background image Invalid image. Error: %1 Select background image Unable to save image. Error: %1 Unable to save image. No data. untitled nimetön All files Save Image MainWindowsNoGUI Creating file '%1' failed! %2 Tiedoston '%1' luonti epäonnistui! %2 Critical error! Kriittinen virhe! unnamed Couldn't prepare data for creation layout Ei voitu luoda dataa somittelun luomiseen Several workpieces left not arranged, but none of them match for paper Useita osia ei voitu järjestää koska ne ei mahdu paperille Can't create a path Pattern Kaava Name Nimi Value Arvo Export final measurements error. Value in line %1 is infinite or NaN. Please, check your calculations. Parser error at line %1: %2. File error %1. One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Description Kuvaus Measurement file has unknown format. Measurement file contains invalid known measurement(s). File error. Tiedostovirhe. Measurement file doesn't include all required measurements. Please, additionally provide: %1 Preparing details for layout Timeout. Process has been stoped because of exception. MoveBackgroundImage move background image MoveDoubleLabel move the first dart label move the second dart label MoveLabel move point label MoveSPoint move single point MoveSpline move spline MoveSplinePath move spline path OpaqueBackgroundImage change a background image opacity OperationMoveLabel move point label OperationShowLabel toggle label PathPage Open Directory Avaa kansio Path that use Valentina Valentinan käyttämä polku Default Oletus Edit Muokkaa Type Tyyppi Path Polku Individual measurements Yksilölliset mitat Patterns Kaavat Standard measurements Standardi mitat Layout Sommittelu PatternPage User Käyttäjä User name Käyttäjätunnus Graphical output Graafinen tulos Use antialiasing Käytä pehmennystä Undo Peru Count steps (0 - no limit) Laske vaiheet (0 - ei rajaa) PreferencesConfigurationPage Save Auto-save modified pattern Tallenna automaattisesti muokattu kaava Interval: Väli: min min Language Kieli GUI language: Decimal separator parts: Default unit: Label language: Pattern making system Pattern making system: Author: Book: Pattern editing Reset warnings Toolbar The text appears under the icon (recommended for beginners). With OS options Centimeters Millimiters Inches Update a pattern only after a curve release Free curve mode default unit General Double click calls Zoom fit best for current pattern piece Scrolling Animation Duration: Scrolling animation duration ms milliseconds Update interval: Time in milliseconds between each animation update Mouse scale Sensor: sensor mouse Scale scrolling sensitivity for mouse with sensor Wheel: mouse wheel Scale scrolling sensitivity for mouse with wheel Acceleration: User Interface Activate dark mode dark mode Change the position of the tool panel to optimize for big screen resolutions. By default, the tool panel will take all available space. Tool panel scaling Don't use the native file dialog Update Automatically check for updates each time the application starts Automatically check for updates PreferencesPathPage Paths that Valentina uses Type Tyyppi Path Polku Default Oletus Edit Muokkaa Open Directory Avaa kansio My Individual Measurements My Multisize Measurements My Patterns My Layouts My Templates My label templates My manual layouts PreferencesPatternPage Graphical output Graafinen tulos Use antialiasing Käytä pehmennystä Undo Peru Count steps (0 - no limit): Workpiece Forbid flipping Show a passmark both in the seam allowance and on the seam line. Show second passmark on seam line By default forbid flipping for all new created workpieces By default hide the main path if the seam allowance was enabled Hide main path Label font: Seam allowance Saumavara Default value: Label data/time format Date: Edit formats Time: Materials Known materials: Manage list of known materials Manage When manage pattern materials save them to known materials list Remeber pattern materials Curve approximation: Set default curve approximation scale Bold line width Line width: Millimiters Millimetriä Inches Tuumaa Use OpenGL to render a scene. This option will take an affect after restart. Use OpenGL render antialiasing scene render Background image Opacity: Opacity value by default Puzzle Export options can be used with single input file only. Valentina's manual layout editor. The manual layout file. PuzzlePreferencesConfigurationPage Language Kieli GUI language: Toolbar The text appears under the icon (recommended for beginners). User Interface Activate dark mode Don't use the native file dialog dark mode General Graphical output Graafinen tulos Use antialiasing Käytä pehmennystä Use OpenGL to render a scene. This option will take an affect after restart. Use OpenGL render Undo Peru Count steps (0 - no limit): Scrolling Animation Duration: Scrolling animation duration ms milliseconds Update interval: Time in milliseconds between each animation update Mouse scale Sensor: sensor mouse Scale scrolling sensitivity for mouse with sensor Wheel: mouse wheel Scale scrolling sensitivity for mouse with wheel Acceleration: undo limit antialiasing scene render Update Automatically check for updates each time the application starts Automatically check for updates PuzzlePreferencesLayoutPage Sheet Format Unit: Templates: Mallit: Width: Leveys: Height: Korkeus: Margins Right: Top: Left: Bottom: Ignore margins Control Warning superposition of pieces Warning pieces out of bound Sticky edges Follow grainline Pieces gap Tiles Show Tiles on sheet Show watermark preview Show watermark default layout settings Millimiters Millimetriä Centimeters Senttimetriä Inches Tuumaa Pixels Pikseliä Line width: PuzzlePreferencesPathPage Paths that Valentina uses Type Tyyppi Path Polku Default Oletus Edit Muokkaa Open Directory Avaa kansio My Individual Measurements My Multisize Measurements My Patterns My Templates My Layouts QCoreApplication Based on Qt %1 (%2, %3 bit) Käännetty käyttäen Qt %1 (%2, %3 bit) VLayoutPassmark prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VLayoutPassmark compatibility error: actualClassVersion = %1 and classVersion = %2 VLayoutPlaceLabel prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VLayoutPlaceLabel compatibility error: actualClassVersion = %1 and classVersion = %2 VAbstractPieceData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VAbstractPieceData compatibility error: actualClassVersion = %1 and classVersion = %2 VRawLayoutData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VRawLayoutData compatibility error: actualClassVersion = %1 and classVersion = %2 VLayoutPiecePathData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VLayoutPiecePathData compatibility error: actualClassVersion = %1 and classVersion = %2 TextLine prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 TextLine compatibility error: actualClassVersion = %1 and classVersion = %2 VTextManager prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VTextManager compatibility error: actualClassVersion = %1 and classVersion = %2 CustomSARecord prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 CustomSARecord compatibility error: actualClassVersion = %1 and classVersion = %2 VPieceNodeData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VPieceNodeData compatibility error: actualClassVersion = %1 and classVersion = %2 QObject Create new pattern piece to start working. Aloita luomalla uusi kaava. mm m cm cm inch tuuma Property The text that appears in the first column header Ominaisuus Value The text that appears in the second column header Arvo px pikseliä move detail Wrong tag name '%1'. Can't convert toUInt parameter Ei voi muuntaa toUInt parametriä Can't convert toBool parameter Ei voi muuntaa toBool parametriä Got empty parameter Tyhjä parametri Can't convert toDouble parameter Ei voinut muuntaa toDouble parametriä Got wrong parameter id. Need only id > 0. Väärä parametri id. Täytyy olla id > 0. United detail Fabric Lining Interfacing Interlining Cut on fold Visibility trigger contains error and will be ignored User material number %1 was not defined in this pattern. Error in internal path '%1'. There is no intersection of first point with cutting countour Error in internal path '%1'. There is no intersection of last point with cutting countour Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. Cannot get tokens from formula '%1'. Parser error: %2. Error Virhe Empty formula Invalid result. Value is infinite or NaN. Please, check your calculations. Value can't be 0 Arvo ei voi olla 0 Value can't be less than 0 Parser error: %1 Jäsentämis virhe: %1 Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. Piece '%1'. Seam allowance is not valid. Found null notch for point '%1' in piece '%2'. Length is less than minimal allowed. Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. Cannot calculate seam allowance before for point '%1'. Reason: %2. Cannot calculate seam allowance after for point '%1'. Reason: %2. Cannot calculate seam allowance after for point '%1'. Reason: Cannot calculate passmark length for point '%1'. Reason: %2. Passmark '%1' is not part of piece '%2'. Cannot cast tool with id '%1'. Empty list of nodes for tool with id '%1'. Invalid formula '%1' for tool with id '%2'. %3. Can't convert toInt parameter Piece name '%1' is not unique. Could not find the segment start. Could not find the segment end. Segment is too short. Error calculating segment for curve '%1'. %2 Error in path '%1'. Calculating segment for curve '%2' has failed. %3 Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. Cannot get tokens from formula '%1'. Formula error: %2. Failed to prepare final measurement placeholder. Parser error at line %1: %2. No data for the height dimension. No data for the size dimension. No data for the hip dimension. No data for the waist dimension. Piece '%1'. Grainline is not valid. Invalid global value for a passmark length. Piece '%1'. Length is less than minimal allowed. move pieces rotate pieces Cannot set printer page size Cannot set printer margins Unable to cut curve '%1'. The curve is too short. Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Point '%1' repeats twice Points '%1' and '%2' have the same coordinates. Leave only one copy of curve '%1' Point '%1' does not lie on a curve '%2' Images All files Confirm deletion Varmista poistaminen Do you really want to delete? Haluatko todella poistaa? QmuParser too few arguments for function sum. parser error message too few arguments for function min. parser error message QmuParserErrorMsg Unexpected token "$TOK$" found at position $POS$. Math parser error messages. Left untouched "$TOK$" and $POS$ Odottomaton ilmimuoto "$TOK$" paikassa $POS$. Internal error Math parser error messages. Sisäinen virhe Invalid function-, variable- or constant name: "$TOK$". Math parser error messages. Left untouched "$TOK$" Väärä funktio, muuttuja tai vakio nimeltä: "$TOK$". Invalid binary operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Väärä binäärinen operaatio: "$TOK$". Invalid infix operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Väärä infix operaattori: "$TOK$". Invalid postfix operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Väärä postfix operaattori: "$TOK$". Invalid pointer to callback function. Math parser error messages. Väärä osoitin palautus funktioon. Expression is empty. Math parser error messages. Kaava on tyhjä. Invalid pointer to variable. Math parser error messages. Väärä osoitin muuttujaan. Unexpected operator "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Yllättävä operaattori "$TOK$" kohdassa $POS$ Unexpected end of expression at position $POS$ Math parser error messages. Left untouched $POS$ Yllättävä lopetus kaavalle kohdassa $POS$ Unexpected argument separator at position $POS$ Math parser error messages. Left untouched $POS$ Yllättävä argumentin erotin kohdassa $POS$ Unexpected parenthesis "$TOK$" at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Yllätävä sulku "$TOK$" kohdassa $POS$ Unexpected function "$TOK$" at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Yllättävä funktio "$TOK$" kohdassa $POS$ Unexpected value "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Yllättävä arvo "$TOK$" kohdassa $POS$ Unexpected variable "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Yllättävä muuttuja "$TOK$" kohdassa $POS$ Function arguments used without a function (position: $POS$) Math parser error messages. Left untouched $POS$ Funktion argumentteja käytetty ilman funktiota (kohdassa $POS$) Missing parenthesis Math parser error messages. Sulkeet puuttuvat Too many parameters for function "$TOK$" at expression position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Liian monta parametriä funktiossa "$TOK$" kohdassa $POS$ Too few parameters for function "$TOK$" at expression position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Liian vähän parametrejä funktiossa "$TOK$" kohdassa $POS$ Divide by zero Math parser error messages. Nollalla jakaminen Domain error Math parser error messages. Domain virhe Name conflict Math parser error messages. Nimikonflikti Invalid value for operator priority (must be greater or equal to zero). Math parser error messages. Väärä operaattorin prioriteetti arvo (täytyy olla suurempi tai yhtä suuri kuin nolla). user defined binary operator "$TOK$" conflicts with a built in operator. Math parser error messages. Left untouched "$TOK$" Käyttäjän asettama binääri operaattori "$TOK$" on konfliktissa ohjelman operaattorin kanssa. Unexpected string token found at position $POS$. Math parser error messages. Left untouched $POS$ Yllättävä merkki kohdassa $POS$. Unterminated string starting at position $POS$. Math parser error messages. Left untouched $POS$ Tekstistä puuttuu sulku kohdassa $POS$. String function called with a non string type of argument. Math parser error messages. Tekstityypin funktio kutsuttu ei-teksti muuttujalla. String value used where a numerical argument is expected. Math parser error messages. Tekstityyppiä käytetty numeerisen argumentin sijaan. No suitable overload for operator "$TOK$" at position $POS$. Math parser error messages. Left untouched "$TOK$" and $POS$ Yllättävä operaattori "$TOK$" kohdassa $POS$. Function result is a string. Math parser error messages. Funktion tulos on tekstiä. Parser error. Math parser error messages. Jäsentämis virhe. Decimal separator is identic to function argument separator. Math parser error messages. Desimaalierotin on sama funktion argumentti erottimen kanssa. The "$TOK$" operator must be preceeded by a closing bracket. Math parser error messages. Left untouched "$TOK$" "$TOK$" operaattorin edessä pitää olla sulku. If-then-else operator is missing an else clause Math parser error messages. Do not translate operator name. If-then-else operattorista puuttuu else osa Misplaced colon at position $POS$ Math parser error messages. Left untouched $POS$ Kaksoispiste väärässä paikassa $POS$ QtColorPicker Black White Red Dark red Green Dark green Blue Dark blue Cyan Dark cyan Magenta Dark magenta Yellow Dark yellow Gray Dark gray Light gray Custom RemoveItemFromGroup Remove item from group RenameBackgroundImage rename background image RenameGroup rename group RenamePP rename pattern piece ResetBackgroundImage reset background image transformation RotateBackgroundImage rotate background image SavePieceOptions save detail options SavePiecePathOptions save path options SavePlaceLabelOptions save place label options SaveToolOptions save tool option ScaleBackgroundImage scale background image ShowDoubleLabel toggle the first dart label togggle the second dart label ShowLabel toggle label TMainWindow Name Nimi Calculated value Formula Matemaattinen kaava Base value Alkuarvo In sizes Koossa In heights Pituudessa Details Yksityiskohdat Name: Nmi: Formula: <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Base value: Description: Move measurement up Move measurement down Calculated value: Full name: Information Type: Measurement type Path: Polku: Show in Explorer Given name: Etunimi: Family name: Sukunimi: Birth date: Email: Notes: Window Ikkuna Measurements Mitat Menu Gradation Save Talenna About &Qt Tietoja &Qt New Uusi Add known Add custom Read only Open template Database Show information about all known measurement Preferences Asetukset untitled %1 This file already opened in another window. Tämä tiedosto on jo avattu toiseen ikkunaan. File error. Tiedostovirhe. Could not save file Tiedostoa ei voitu tallentaa measurements Individual measurements (*.vit) Yksilölliset mitat (*.vit) Standard measurements (*.vst) Standardi mitat (*.vst) Save as Talenna nimellä &New Window Edit measurement Error Virhe Empty field. Parser error: %1 Jäsentämis virhe: %1 Standard measurements Standardi mitat Height: Pituus: Size: Koko: Individual measurements Yksilölliset mitat untitled nimetön Unsaved changes Measurements have been modified. Do you want to save your changes? Empty field Tyhjä sarake Value Arvo Open file Avaa tiedosto Import from a pattern Pattern files (*.val) Kaava tiedostot (*.val) Pattern unit: Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. File contains invalid known measurement(s). File has unknown format. File '%1' doesn't exist! The name of known measurement forbidden to change. Can't find measurement '%1'. The full name of known measurement forbidden to change. Function Wizard Move measurement top Move measurement bottom Delete measurement unknown gender male gender Mies female gender Nainen Gender: PM system: Create from existing file Select file Measurement diagram <html><head/><body>?Unknown measurement</body></html> <html><head/><body>?Unknown measurement</body></html> About Qt Tietoja Qt:stä File was not saved yet. Search Measurement's name in a formula Measurement's name in a formula. Measurement's human-readable name. Don't Save Export to CSV Show in Finder Comma-Separated Values Customer's name Customer's email address All files Could not save the file read only Multisize measurements Invalid result. Value is infinite or NaN. Please, check your calculations. Empty Export from multisize measurements is not supported. Customer name: Open multisize … Create from existing … Save… Import from CSV Measurement name in is empty. Merasurement '%1' doesn't match regex pattern. Merasurement '%1' already used in file. Measurement '%1' is not one of known measurements. Individual measurements require at least 2 columns. Error in row %1. Multisize measurements require at least 4 columns. Imported file must not contain the same name twice. Error in row %1. Measurement name is empty. Cannot save settings. Access denied. &File &Tiedosto &Window &Help &Apua &Measurements &Open individual … &Save &Tallenna Save &As … &Quit &About Tape &New &Uusi Cannot read settings from a malformed .INI file. Name measurement column Nimi Full name measurement column Calculated value measurement column Formula measurement column Matemaattinen kaava Base value measurement column Alkuarvo Correction measurement column Units: Mittayksiköt: Shift B Shift C Correction: Dimension: Select one of the dimensions to later use the measurement value in piece label Base Values: Export to individual Export to individual measurements Use full circumference Restrict second dimension Restrict third dimension Dimension labels The table doesn't provide dimensions Invalid base value for dimension A The table doesn't support dimension B Invalid base value for dimension B The table doesn't support dimension C Invalid base value for dimension C measurements.vit Shift (%1): %1 shift Cannot convert base value to double in column 2. Cannot convert shift value to double in column %1. Millimeters Inches Tuumaa Centimeters Senttimetriä Degrees Restrict first dimension <html><head/><body>Select New to create a measurement file.</body></html> <html><head/><body>Search history %1</body></html> Alt+Down 0 results <html><head/><body>Match Case %1</body></html> <html><head/><body>Match words %1</body></html> <html><head/><body>Match with regular expressions %1</body></html> <html><head/><body>Use unicode properties %1 The meaning of the \w, \d, etc., character classes, as well as the meaning of their counterparts (\W, \D, etc.), is changed from matching ASCII characters only to matching any character with the corresponding Unicode property. For instance, \d is changed to match any character with the Unicode Nd (decimal digit) property; \w to match any character with either the Unicode L (letter) or N (digit) property, plus underscore, and so on. This option corresponds to the /u modifier in Perl regular expressions.</body></html> Alt+U <html><head/><body>Find Previous %1</body></html> Shift+F3 <html><head/><body>Find Next %1</body></html> F3 Add separator Dimension custom names TabGrainline Grainline visible Rotation: Formula wizard Value Arvo Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Length: Center pin: Top pin: Bottom pin: Arrows: TabLabels Piece label data Letter: Letter of pattern piece Placement: Labels Width: Leveys: Formula wizard Value Arvo Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Height: Korkeus: Center pin: Top left pin: Bottom right pin: Angle: Pattern label visible Label template: Edit template Label data Quantity: on fold Annotation: A text field to add comments in Orientation: Rotation: Tilt: Fold position: Edit piece label template Options to control position a detail label. Not available if a detail label template is empty. Options to control position a pattern label. Not available if a pattern label template is empty. Pattern label data Edit pattern label Pattern name: Pattern number: Company/Designer name: Customer name: Date format: Time format: Customer birth date: yyyy-MM-dd Customer email: Materials Pattern materials: Manage list of pattern materials Manage Piece label visible TabPassmarks Passmark: One line Two lines Three lines T mark V mark Angle Kulma Straightforward Bisector Marks Select if need designate the corner point as a passmark Intersection Show the second passmark on seam line This option has effect only if the second passmark on seam line enabled in global preferences. The option helps disable the second passmark for this passmark only. Select if need designate the corner point as a passmark. Show only left passmark. Intersection (only left) Select if need designate the corner point as a passmark. Show only right passmark. Intersection (only right) Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Acute angle that looks outside of piece V mark 2 Manual length Length: Formula wizard Value Arvo Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> U mark Box mark List of all defined passmarks. To define a passmark return to the Main Path tab, call context menu for a point item and make it a passmark. Acute angle that looks inside of piece TabPaths Main path All objects in path should follow in clockwise direction. Forbid piece be mirrored in a layout. Forbid flipping Ready! Seam allowance Saumavara Width: Leveys: Formula wizard Value Arvo Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Näytä koko laskenta ikkunassa</body></html> Nodes Node: Before: Return to default width Default Oletus After: Angle: Start point: End point: Include as: Internal paths The seam allowance is part of main path Built in Hide the main path if the seam allowance is enabled Hide main path Name of detail: Detail Yksityiskohta Name can't be empty Force piece to be always flipped in a layout. Force flipping Move on top Move up Move down Move on bottom Priority: Controls priority in layout. 0 - no priority. Automatic seam allowance Custom seam allowance Piece Universally Unique IDentifier of piece. Used to identifier piece while updating manual layout. Left empty to generate new value. Gradation label: Insert… TabPlaceLabels Dialog TapeConfigDialog Apply Toteuta &Cancel &Peru &Ok Ok Config Dialog Konfigurointi dialogi Configuration Asetukset Paths Polut TapeConfigurationPage Language Kieli GUI language GUI kieli Decimal separator parts Desimaalierotin osat With OS options (%1) Käyttäen käyttöjärjestelmä asetusta (%1) TapePathPage Open Directory Avaa kansio Path that use Valentina Valentinan käyttämä polku Default Oletus Edit Muokkaa Type Tyyppi Path Polku Individual measurements Yksilölliset mitat Standard measurements Standardi mitat TapePreferencesConfigurationPage Language Kieli GUI language: Decimal separator parts: Pattern making system Pattern making system: Author: Book: Measurements editing Reset warnings Toolbar The text appears under the icon (recommended for beginners). With OS options User Interface Activate dark mode dark mode Don't use the native file dialog Update Automatically check for updates each time the application starts Automatically check for updates TapePreferencesPathPage Paths that Valentina uses Type Tyyppi Path Polku Default Oletus Edit Muokkaa Open Directory Avaa kansio My Individual Measurements My Multisize Measurements My Templates My Patterns My Layouts TogglePieceForceForbidFlipping piece flipping TogglePieceInLayout detail in layout list Utils::CheckableMessageBox Do not ask again Älä kysy uudelleen Do not &ask again Älä kysy &uudelleen Do not &show again Älä näytä &uudelleen VAbstartMeasurementDimension Invalid min/max range Invalid step Base value invalid Height dimension Pituus Size dimension Koko Waist dimension Hip dimension Chest full circumference dimension Chest half circumference dimension Size Koko Waist full circumference dimension Waist half circumference dimension Hip full circumference dimension Hip half circumference dimension VAbstractConverter Couldn't get version information. Versiotietoja ei voitu palattaa. Too many tags <%1> in file. Liian monta merkkiä <%1> tiedostossa. Version "%1" invalid. Versio "%1" väärä. Version "0.0.0" invalid. Versio "0.0.0" väärä. Invalid version. Minimum supported version is %1 Väärä versio. Pienin tuettu versio on %1 Invalid version. Maximum supported version is %1 Väärä versio. Suurin tuettu versio on %1 Error no unique id. Virhe: id ei ole yksikäsitteinen. Could not change version. Versiota ei voitu vaihtaa. Error creating a reserv copy: %1. Unexpected version "%1". Yllättävä versio "%1". Error openning a temp file: %1. Invalid version. Minimum supported format version is %1 Invalid version. Maximum supported format version is %1 Can't open file %1: %2. Tiedostoa %1 ei voitu avata: %2. Can't open schema file %1: %2. Skeematiedostoa %1 ei voitu avata. %2. Could not load schema file '%1'. Validation error file %3 in line %1 column %2 Tarkastus virhe tiedostossa %3 rivillä %1 kohdassa %2 VAbstractCubicBezierPath Can't cut this spline VAbstractLayoutDialog Letter Paper format Legal Paper format Tabloid Paper format Roll 24in Paper format Roll 30in Paper format Roll 36in Paper format Roll 42in Paper format Roll 44in Paper format Roll 48in Paper format Roll 62in Paper format Roll 72in Paper format Custom Paper format VAbstractMainWindow Confirm format rewriting This file is using previous format version v%1. The current is v%2. Saving the file with this app version will update the format version for this file. This may prevent you from be able to open the file with older app versions. Do you really want to continue? Comma-Separated Values values Export to CSV Do you want to change the premissions? Cannot set permissions for %1 to writable. Could not save the file. Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). This file already opened in another window. Tämä tiedosto on jo avattu toiseen ikkunaan. The lock file could not be created, for lack of permissions. Unknown error happened, for instance a full partition prevented writing out the lock file. The file has no write permissions. VAbstractNode This id (%1) is not unique. VAbstractOperation Label Length Pituus operation options delete operation Visibility group default VAbstractPattern Can't find tool in table. Työkalua ei löydy taulukosta. Error creating or updating group New group measurement VAbstractPiece Piece '%1'. Not enough points to build seam allowance. VAbstractPieceData Detail Yksityiskohta VAbstractSpline Length Pituus Label VAbstractTool black musta green vihreä blue sininen dark red tummanpunainen dark green tummanvihreä dark blue tummansininen yellow keltainen Confirm deletion Varmista poistaminen Do you really want to delete? Haluatko todella poistaa? light salmon orange deep pink violet dark violet medium sea green lime deep sky blue corn flower blue Edit wrong formula Muutit väärää kaavaa goldenrod VApplication Error parsing file. Program will be terminated. Jäsentämis virhe tiedostossa. Ohjelma lopetetaan. Error bad id. Program will be terminated. Väärä id. Ohjelma lopetetaan. Error can't convert value. Program will be terminated. Arvoa ei voi muuttaa. Ohjelma lopetetaan. Error empty parameter. Program will be terminated. Tyhjä parametri. Ohjelma lopetetaan. Error wrong id. Program will be terminated. Väärä id. Ohjelma lopetetaan. Something's wrong!! Joku on vialla!! Parser error: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. Invalid notch. Formula warning: %1. Program will be terminated. VBackgroundImageItem Hold Visible Show in Finder Show in Explorer Save as … Reset transformation Delete Poista VBackgroundPatternImage Unexpected mime type: %1 Couldn't read the image. Error: %1 No data. Invalid id. Content type is empty. Content type mistmatch. Not image. VBank Preparing data for layout error: Detail '%1' square <= 0 Preparing data for layout error: Layout paper sheet <= 0 Preparing data for layout error: List of details is empty VComboBoxDelegate Select material VCommandLine Path to custom measure file (export mode). The measure file Format number Template number The page width The measure unit Angle Kulma Auto crop unused length (export mode). The unit The gap width Grouping type Page height, width, units must be used all 3 at once. Unknown page templated selected. Unsupported paper units. Unsupported layout units. Export options can be used with single input file only. Test option can be used with single input file only. The base filename of exported layout files. Use it to enable console export mode. The base filename of layout files The destination folder Page width in current units like 12.0 (cannot be used with "%1", export mode). Page height in current units like 12.0 (cannot be used with "%1", export mode). Pattern making program. Kaavan luonti ohjelma. Pattern file. Kaava tiedosto. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Gap width must be used together with shift units. Left margin must be used together with page units. Right margin must be used together with page units. Top margin must be used together with page units. Bottom margin must be used together with page units. The path to output destination folder. By default the directory at which the application was started. Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. Sets layout groupping cases (export mode): %1. Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Number corresponding to output format (default = 0, export mode): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Export dxf in binary form. Export text as paths. Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Export only details that match a piece name regex. The name regex Export to csv with header. By default disabled. Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Codec name Specify csv separator character. Default value is '%1'. Valid characters: Separator character Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Path to csv file Number corresponding to layout page template (default = 0, export mode): Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. The left margin Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. The right margin Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. The top margin Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. The bottom margin Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Cannot use pageformat and page explicit size together. Tiled left margin must be used together with page units. Tiled right margin must be used together with page units. Tiled top margin must be used together with page units. Tiled bottom margin must be used together with page units. Page measure units (export mode). Valid values: %1. Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. User material Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. Invalid user material '%1'. Separator is missing. Invalid user material '%1'. Wrong material number. Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. The page height Order detail to follow grainline direction (export mode). <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. Time Coefficient Time must be in range from 1 minute to 60 minutes. Follow manual priority over priority by square (export mode). Nest quantity copies of each piece (export mode). Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. Coefficient must be in range from 0 to 100. Auto crop unused width (export mode). Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). Horizontal scale Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). Vertical scale Prefer one sheet layout solution (export mode). Invalid dimension A value. Invalid dimension B value. Invalid dimension C value. Set base for dimension A in the multisize measurements units (export mode). The dimension A base Set base for dimension B in the multisize measurements units (export mode). The dimension B base Set base for dimension C in the multisize measurements units (export mode). The dimension C base The filename of exported layout file. Use it to enable console export mode. The filename of layout file Load pattern pieces form the raw layout data file. The raw layout data file Number corresponding to output format (default = 0, export mode): <not defined> Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): <not defined> Run the program in a test mode. The program in this mode loads a single layout file and silently quit without showing the main window. The key have priority before key '%1'. Invalid page height value. Invalid page width value. Invalid gap width. Invalid layout page left margin. Invalid layout page right margin. Invalid layout page top margin. Invalid layout page bottom margin. Invalid tiled page left margin. Invalid tiled page right margin. Invalid tiled page top margin. Invalid tiled page bottom margin. Layout units (as paper's one except px, export mode). Default units cm. VCommonSettings measurements individual multisize templates label templates patterns manual layouts VContainer Can't find object Objektia ei löydy Can't cast object Ei voi luoda objektia Can't find object. Type mismatch. Objektia ei löydy. Tyypin yhteensopimattomuus. Number of free id exhausted. Can't create a curve with type '%1' Can't cast object. VCubicBezierPath Not enough points to create the spline. Pisteitä ei ole tarpeeksi splinin luomiseen. This spline does not exist. Tämä splini ei ole olemassa. VDomDocument Can't convert toUInt parameter Ei voi muuntaa toUInt parametriä Can't convert toBool parameter Ei voi muuntaa toBool parametriä Got empty parameter Tyhjä parametri Can't convert toDouble parameter Ei voinut muuntaa toDouble parametriä Can't open file %1: %2. Tiedostoa %1 ei voitu avata: %2. Can't open schema file %1: %2. Skeematiedostoa %1 ei voitu avata. %2. Could not load schema file. Skeematiedostoa ei voitu avata. Validation error file %3 in line %1 column %2 Tarkastus virhe tiedostossa %3 rivillä %1 kohdassa %2 Parsing error file %3 in line %1 column %2 Jäsentämis virhe tiedostossa %3 rivillä %1 kohdassa %2 Couldn't get node Solmua ei voitu palauttaa Got wrong parameter id. Need only id > 0. Väärä parametri id. Täytyy olla id > 0. This id is not unique. Tämä id ei ole yksikäsitteinen. Could not copy temp file to document file Tilapäistiedostoa ei voitu kopioida dokumenttiin Could not remove document file Dokumenttitiedostoa ei voitu poistaa Fail to write Canonical XML. <empty> Not unique id (%1) This id (%1) is not unique. Couldn't get version information. Versiotietoja ei voitu palattaa. Too many tags <%1> in file. Liian monta merkkiä <%1> tiedostossa. Version "%1" invalid. Versio "%1" väärä. Version "0.0.0" invalid. Versio "0.0.0" väärä. VDrawTool Edit wrong formula Muutit väärää kaavaa Options Asetukset Delete Poista This id (%1) is not unique. Add to group Remove from group Show label Restore label position VException Exception: %1 VFormula Error Virhe Data container is empty Math parser error: %1 Result is infinite Result is NaN Result is zero Result less than zero Formula is empty Not evaluated VFormulaData Not evaluated Error Virhe Formula is empty VFormulaProperty Value Arvo Formula Matemaattinen kaava VLayoutExporter Can't save file '%1'. Error: %2. Cannot set printer page size Cannot set printer margins Can't open file '%1' Export raw layout data failed. %1. Creating file '%1' failed! %2 Tiedoston '%1' luonti epäonnistui! %2 Can't create an flat dxf file. Can't create an AAMA dxf file. Can't create an ASTM dxf file. (flat) files files Image files tiled Numerical control Raw Layout Data VLayoutPiece Piece %1 doesn't have shape. VMeasurements Can't find measurement '%1' The measurement name is empty! None Height Pituus Size Koko Hip Waist VNodePoint Options Asetukset In layout Show label Exclude Delete Poista Forbid flipping Force flipping by length by points intersetions by first edge symmetry by second edge symmetry by first edge right angle by second edge right angle Passmark Seam allowance angle Passmark angle Straightforward Bisector Intersection Intersection (only left) Intersection (only right) Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Passmark mark One line Two lines Three lines T mark V mark V mark 2 U mark Box mark VPApplication Error parsing file. Program will be terminated. Jäsentämis virhe tiedostossa. Ohjelma lopetetaan. Error bad id. Program will be terminated. Väärä id. Ohjelma lopetetaan. Error can't convert value. Program will be terminated. Arvoa ei voi muuttaa. Ohjelma lopetetaan. Error empty parameter. Program will be terminated. Tyhjä parametri. Ohjelma lopetetaan. Error wrong id. Program will be terminated. Väärä id. Ohjelma lopetetaan. Something's wrong!! Joku on vialla!! Exception thrown: %1. Program will be terminated. Can't begin to listen for incoming connections on name '%1' Export mode doesn't support openning several files. Import raw layout data does not support openning several layout files. Please, provide one input file. VPCarrousel Unplaced pieces Pieces of VPCarrouselPieceList Move to Sheet Delete Poista Remove from Sheet Move to VPDialogAbout About Puzzle Puzzle version Build revision: Käännös versio: This program is part of Valentina project. Check For Updates Cannot open your default browser Oletus selaimen aukaiseminen epäonnistui Build revision: %1 Built on %1 at %2 Käännetty %3 klo %2 {1 ?} Web site : %1 Kotisivu: %1 VPE::VBoolProperty True Tosi False Epätosi VPE::VFileEditWidget Directory Kansio Open File Avaa Tiedosto VPGraphicsPiece Move to Remove from Sheet VPLayout Sheet %1 VPLayoutFileReader Piece Got empty attribute '%1' Piece %1 invalid. Error in line %1. Seam allowance is empty. Error in line %1. Grainline is empty. Error in line %1. Internal path shape is empty. Error in line %1. Marker shape is empty. Unexpected tag %1 in line %2 VPMainGraphicsView Restore transformation origin Remove sheet VPMainWindow Puzzle &File &Tiedosto &Window &Help &Apua Menu Piece Carrousel Properties Current piece properties Current piece Infos Name: Nmi: Seamline Show Seamline Geometry Mirror piece Rotation Angle: Placement No piece selected Sheet properties Current sheet Format Remove unused length Margins Right: Top: Left: Bottom: Placement Grid Show Grid Column width Row height Control Follow grainline Sticky edges Export Export Sheet Tiles properties Tiled Pdf Export Show Tiles on sheet Layout properties Layout Sommittelu Description Kuvaus Warning superposition of pieces Warning pieces out of bound zoom Scale &Open &Avaa &Save &Tallenna Save &As &Import Raw Layout Data E&xit L&opeta &New &Uusi About &Qt Tietoja &Qt About &Puzzle Zoom in Tarkenna Zoom out Loitonna Zoom 1:1 Zoom fit best Tarkenna sopivasti Zoom sheet Preferences Asetukset File '%1' doesn't exist! File error. Tiedostovirhe. Fail to create layout. Could not extract data from file '%1'. %2 Centimeters Senttimetriä Millimiters Millimetriä Inches Tuumaa Scale: untitled %1.vlt untitled.vlt read only Cannot read settings from a malformed .INI file. Cannot save settings. Access denied. Failed to open file, is it writable? &New Window Layout files Open file Avaa tiedosto Could not save the file layout Save as Talenna nimellä Failed to lock. This file already opened in another window. Could not save file Tiedostoa ei voitu tallentaa Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Raw Layout files About Qt Tietoja Qt:stä &Sheet &Layout Watermark Gradation id: Transformation Translate Translate piece Horizontal: Vertical: Relative translation Rotate Apply to each piece separately Unit: Templates: Mallit: Length: Width: Leveys: Grainline orientation: Force the grainline orientation to always be horizontal Force the grainline orientation to always be vertical Ignore margins Height: Korkeus: Show watermark preview Show watermark Print tiles scheme Pieces gap: Export Layout Undo commands Add Sheet Print Print preview Print tiled Print preview tiled Editor Create or edit a watermark Edit current Load Remove Unable to read a layout file. %1 Piece %1 invalid. &Undo &Peru &Redo &Tee uudelleen Pixels Pikseliä Unsaved changes Layout has been modified. Do you want to save your changes? Save… Save Talenna Don't Save Can't create a path Can't open file '%1' Failed in flushing page to disk, disk full? The layout is invalid. The layout is invalid. Piece out of bound. Do you want to continue export? The layout is invalid. Pieces superposition. Do you want to continue export? Sheet %1 translate pieces rotate pieces For printing multipages document all sheet should have the same size. Print error Cannot proceed because there are no available printers in your system. Watermark files Unable to get sheet page settings Show tile number VPTileFactory Grid ( %1 , %2 ) Page %1 of %2 cm unit cm in unit tuuma VPUndoAddSheet add sheet VPUndoMovePieceOnSheet move piece on sheet VPUndoOriginMove move transformation origin VPUndoPieceMove move piece VPUndoPieceRotate rotate piece VPUndoRemoveSheet add sheet VPattern Error no unique id. Virhe: id ei ole yksikäsitteinen. Error parsing file. Virhe tiedoston jäsennyksessä. Error can't convert value. Virhe: arvoa ei voi muuntaa. Error empty parameter. Virhe: tyhjä parametri. Error wrong id. Virhe: väärä id. Error parsing file (std::bad_alloc). Virhe tiedoston (std::bad_alloc) jäsennyksessä. Error creating or updating detail Virhe luodessa tai päivittäessä yksityiskohtaa Error creating or updating single point Virhe luodessa tai päivittäessä yksi piste Error creating or updating point of end line Virhe luodessa tai päivittäessä päätepiste Error creating or updating point along line Virhe luodessa tai päivittäessä piste viivalla Error creating or updating point of shoulder Virhe luodessa tai päivittäessä olkapääpiste Error creating or updating point of normal Virhe luodessa tai päivittäessä normaalipiste Error creating or updating point of bisector Virhe luodessa tai päivittäessä jakopiste Error creating or updating point of lineintersection Virhe luodessa tai päivittäessä viivojen leikkaus Error creating or updating point of contact Virhe luodessa tai päivittäessä kontaktipiste Error creating or updating modeling point Virhe luodessa tai päivittäessä mallinnuspiste Error creating or updating height Virhe luodessa tai päivittäessä pituus Error creating or updating triangle Virhe luodessa tai päivittäessä kolmio Error creating or updating point of intersection Virhe luodessa tai päivittäessä leikkauspiste Error creating or updating cut spline point Virhe luodessa tai päivittäessä leikatessa splinipiste Error creating or updating cut spline path point Virhe luodessa tai päivittäessä leikatessa polun piste Error creating or updating cut arc point Virhe luodessa tai päivittäessä kaaren leikkauspiste Error creating or updating point of intersection line and axis Virhe luodessa tai päivittäessä akselin ja viivan leikkauspiste Error creating or updating point of intersection curve and axis Virhe luodessa tai päivittäessä akselin ja käyrän leikkauspiste Error creating or updating line Virhe luodessa tai päivittäessä viivaa Error creating or updating simple curve Virhe luodessa tai päivittäessä yksinkertaista viivaa Error creating or updating curve path Virhe luodessa tai päivittäessä käyräpolku Error creating or updating modeling simple curve Virhe luodessa tai päivittäessä yksinkertaista mallinnus käyrää Error creating or updating modeling curve path Virhe luodessa tai päivittäessä mallinnus käyrää Error creating or updating simple arc Virhe luodessa tai päivittäessä yksinkertaista kaarta Error creating or updating modeling arc Virhe luodessa tai päivittäessä mallinnuskaarta Error creating or updating union details Virhe luodessa tai päivittäessä unioni yksityiskohtaa Error creating or updating point of intersection arcs Error creating or updating point of intersection circles Error creating or updating point from circle and tangent Error creating or updating point from arc and tangent Error creating or updating true darts Wrong tag name '%1'. Unknown point type '%1'. Unknown spline type '%1'. Unknown arc type '%1'. Unknown tools type '%1'. Error not unique id. Error creating or updating point of intersection curves Error creating or updating simple interactive spline Error creating or updating interactive spline path Error creating or updating cubic bezier curve Error creating or updating cubic bezier path curve Error creating or updating operation of rotation Unknown operation type '%1'. Error creating or updating operation of flipping by line Error creating or updating operation of flipping by axis Error creating or updating operation of moving Error creating or updating point of line intersection Error creating or updating simple elliptical arc Unknown elliptical arc type '%1'. Error creating or updating modeling elliptical arc Detail Yksityiskohta Unnamed path Error creating or updating a piece path Error creating or updating pin point Error creating or updating place lavel Piece path doesn't contain nodes VPatternConverter Unexpected version "%1". Yllättävä versio "%1". Error restoring backup file: %1. Virhe palauttaessa varmuuskopio tiedostoa: %1. VPatternImage Unexpected mime type: %1 Couldn't read the image. Error: %1 No data. Content type is empty. Content type mistmatch. Not image. VPatternRecipe Invalid tag %1 Can't find element by id '%1' Can't create history record for the tool. Reading final measurements error. Value for final measurtement '%1' is infinite or NaN. Please, check your calculations. Unable to create record for final measurement '%1'. Error: %2 VPiece Cannot calculate a notch for point '%1' in piece '%2'. Notch for point '%1' in piece '%2' will be disabled. Manual length is less than allowed value. Main path of piece %1 VPoster Grid ( %1 , %2 ) Page %1 of %2 Sheet %1 of %2 Not supported file suffix '%1' cm unit cm in unit tuuma Cannot open the watermark image. VPrintLayout For printing multipages document all sheet should have the same size. For previewing multipage document all sheet should have the same size. Pages will be cropped because they do not fit printer paper size. Print error Cannot proceed because there are no available printers in your system. Failed to open file, is it writable? Failed in flushing page to disk, disk full? Cannot set printer margins Cannot set custom printer page size Cannot set printer page size Cannot set printer tiled page size unamed File error. %1 %2 The layout is stale. The layout was not updated since last pattern modification. Do you want to continue? VRawLayout VRawLayout::ReadFile() failed. Raw layout format prefix mismatch error. VRawLayout::ReadFile() failed. Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = %2 VSimpleCurve VSimpleCurve::RefreshGeometry: pointer to curve is null. VSplinePath Not enough points to create the spline. Pisteitä ei ole tarpeeksi splinin luomiseen. This spline does not exist. Tämä splini ei ole olemassa. Can't cut spline path with one point Slinipolkua ei voi leikata yhdellä pisteellä VTableSearch Match case Words Regex Match case and words Match case and regex Search VToolAlongLine Length Pituus Angle Kulma Label VToolArc Length Pituus Radius Säde Start angle End angle Label VToolArcWithLength Length Pituus Radius Säde Start angle End angle Label VToolBasePoint Label VToolCurveIntersectAxis Error calculating point '%1'. There is no intersection with curve '%2' and axis through point '%3' with angle %4° Length Pituus Angle Kulma Label Segment 1 Segment 2 VToolCutArc Arc Kaari length start angle end angle radius label VToolCutSpline Curve Käyrä length label VToolCutSplinePath Curve Käyrä length label VToolDetail Options Asetukset Delete Poista VToolDoublePoint Label VToolEllipticalArc Length Pituus Radius Säde Start angle End angle Label Rotation VToolFlippingByAxis Origin point Flipping by axis VToolFlippingByLine First line point Viivan ensimmäinen piste Second line point Viivan toinen piste flipping by line VToolHeight Length Pituus Angle Kulma Label VToolLine Length Pituus Angle Kulma VToolLineIntersect Label Error calculating point '%1'. Lines (%2;%3) and (%4;%5) have no point of intersection VToolLineIntersectAxis Length Pituus Angle Kulma Label Error calculating point '%1'. Line (%2;%3) doesn't have intersection with axis through point '%4' and angle %5° VToolLinePoint Length Pituus Angle Kulma Label VToolMove Rotation angle Length Pituus Center point Keskipiste Angle Kulma Rotation origin point move VToolOptionsPropertyBrowser Base point Alkupiste Point label Pistenimilappu Position Sijainti Point at distance and angle Piste viivaa pitkin Line type Viivan tyyppi Length Pituus Angle Kulma Point at distance along line Piste viivaa pitkin Arc Kaari Radius Säde First angle Ensimmäinen kulma Second angle Toinen kulma Point along bisector Piste puolikasta pitkin Cut arc tool Leikkaa kaari työkalu Tool for segmenting a curve Työkalu käyrän segmentointiin Tool segment a pathed curve Työkalu polun segmentointiin Perpendicular point along line Kohtisuorapiste viivaa pitkin Line between points Pisteiden välinen viiva Point at line intersection Viivojen leikkauspiste Point along perpendicular Piste kohtisuoraa pitkin Additional angle degrees Kulman lisäasteet Point at intersection of arc and line Kaaren ja viivan leikkauspiste Tool to make point from x & y of two other points Luo piste kahdesta muusta pisteestä Special point on shoulder Olkapään erityispiste Curve tool Käyrä työkalu Curve factor Käyrän kerroin Tool for path curve Työkalu käyrälle Tool triangle Kolmiotyökalu Point intersection line and axis Viivan ja akselin leikkauspiste Line color Viivan väri Color Väri Point intersection curve and axis Käyrän ja akselin leikkauspiste First point Ensimmäinen piste Second point Toinen piste Arc with given length True darts Tool to make point from intersection two arcs Tool to make point from intersection two circles Tool to make point from circle and tangent Tool to make point from arc and tangent Highest point Lowest point Leftmost point Rightmost point Tool to make point from intersection two curves Cubic bezier curve Tool cubic bezier curve Tool rotation Vertical axis Horizontal axis Tool move Tool flipping by line Tool flipping by axis Elliptical arc Point label: Position: Base point: Line type: Line color: Length: Angle: First point: Second point: Center point: Radius: First angle: Second angle: Color: Third point: Point 1 label: Point 2 label: First base point: Second base point: First dart point: Arc: Curve: First line point: Second line point: First line (first point): First line (second point): Second line (first point): Second line (second point): Additional angle degrees: Center of arc: Top of the line: End of the line: X: vertical point: Y: horizontal point: First arc: Second arc: Take: Center of the first circle: Center of the second circle: First circle radius: Second circle radius: First curve: Second curve: Vertical correction: Horizontal correction: Center of the circle: Tangent point: Circle radius: Name: Nmi: C1: angle: C1: length: C2: angle: C2: length: First point of axis: Second point of axis: Axis point: Suffix: Origin point: Axis type: Rotation angle: Fourth point: Pen style: Approximation scale: Rotation origin point: Notes: Alias: Alias1: Alias2: Point of intersection circle and segment Background image Hold: Visible: Opacity: VToolPointFromArcAndTangent Error calculating point '%1'. Tangent to arc '%2' from point '%3' cannot be found VToolPointFromCircleAndTangent Error calculating point '%1'. Tangent to circle with center '%2' and radius '%3' from point '%4' cannot be found VToolPointOfContact Length Pituus Angle Kulma Label Error calculating point '%1'. Circle with center '%2' and radius '%3' doesn't have intersection with line (%4;%5) VToolPointOfIntersectionArcs Error calculating point '%1'. Arcs '%2' and '%3' have no point of intersection VToolPointOfIntersectionCircles Error calculating point '%1'. Circles with centers in points '%2' and '%3' have no point of intersection VToolPointOfIntersectionCurves Error calculating point '%1'. Curves '%2' and '%3' have no point of intersection Label Curve 1 segment 1 Curve 1 segment 2 Curve 2 segment 1 Curve 2 segment 2 VToolRotation Origin point Rotation angle rotate VToolSeamAllowance Current seam allowance move pattern piece label resize pattern piece label rotate pattern piece label move pattern info label resize pattern info label rotate pattern info label move grainline resize grainline rotate grainline Options Asetukset In layout Delete Poista apply save detail options multi deletion Forbid flipping Force flipping This id (%1) is not unique. Tool was used after deleting. VToolShoulderPoint Length Pituus Angle Kulma Label VToolTriangle Error calculating point '%1'. Point of intersection cannot be found VToolUnionDetails union details This id (%1) is not unique. VTranslateVars Bunka System name Bunka Fashion College Author name Fundamentals of Garment Design Book name Barnfield and Richard System name Jo Barnfield and Andrew Richards Author name Pattern Making Primer Book name Friendship/Women System name Elizabeth Friendship Author name Creating Historical Clothes - Pattern Cutting from the 16th to the 19th Centuries Book name Morris, K. System name Karen Morris Author name Sewing Lingerie that Fits Book name Castro System name Lucia Mors de Castro Author name Patternmaking in Practic Book name Kim & Uh System name Injoo Kim and Mykyung Uh Author name Apparel Making in Fashion Design Book name Waugh System name Norah Waugh Author name Corsets and Crinolines Book name Grimble System name Frances Grimble Author name Fashions of the Gilded Age Book name Thornton's International System System name ed. R. L. Shep Author name The Great War: Styles and Patterns of the 1910s Book name Hillhouse & Mansfield System name Marion S. Hillhouse and Evelyn A. Mansfield Author name Dress Design: Draping and Flat Pattern Making Book name Pivnick System name Esther Kaplan Pivnick Author name How to Design Beautiful Clothes: Designing and Pattern Making Book name Minister & Son System name Edward Minister & Son, ed. R. L. Shep Author name The Complete Guide to Practical Cutting (1853) Book name Strickland System name Gertrude Strickland Author name A Tailoring Manual Book name Loh & Lewis System name May Loh and Diehl Lewis Author name Patternless Fashion Design Book name Morris, F. R. System name F. R. Morris Author name Ladies Garment Cutting and Making Book name Mason System name Gertrude Mason Author name Gertrude Mason's Patternmaking Book Book name Kimata System name K. Kimata Author name K.Kimata's Simplified Drafting Book for Dressmaking Book name Master Designer System name The Master Designer (Chicago, IL) Author name Master Designer's System of Designing, Cutting and Grading Book name Kopp System name Ernestine Kopp, Vittorina Rolfo, Beatrice Zelin, Lee Gross Author name How to Draft Basic Patterns Book name Ekern System name Doris Ekern Author name Slacks Cut-to-Fit for Your Figure Book name Doyle System name Sarah J. Doyle Author name Sarah's Key to Pattern Drafting Book name Shelton System name Karla J. Shelton Author name Design and Sew Jeans Book name Lady Boutique System name Lady Boutique Author name Lady Boutique magazine (Japan) Book name Rohr System name M. Rohr Author name Pattern Drafting and Grading: Women's nd Misses' Garment Design Book name Moore System name Dorothy Moore Author name Dorothy Moore's Pattern Drafting and Dressmaking Book name Abling System name Bina Abling Author name Integrating Draping, Drafting and Drawing Book name Fukomoto System name Sue S. Fukomoto Author name Scientific Pattern Drafting as taught at Style Center School of Costume Design, Dressmaking and Millinery Book name Dressmaking International System name Dressmaking International Author name Dressmaking International magazine (Japan) Book name Erwin System name Mabel D. Erwin Author name Practical Dress Design Book name Gough System name E. L. G. Gough Author name Principles of Garment Cutting Book name Allemong System name Elizabeth M. Allemong Author name European Cut Book name McCunn System name Donald H. McCunn Author name How to Make Your Own Sewing Patterns Book name Zarapkar System name Shri K. R. Zarapkar and Shri Arvind K. Zarapkar Author name Zarapkar System of Cutting Book name Kunick System name Philip Kunick Author name Sizing, Pattern Construction and Grading for Women's and Children's Garments Book name Handford System name Jack Handford Author name Professional Patternmaking for Designers: Women's Wear, Men's Casual Wear Book name Davis System name R. I. Davis Author name Men's 17th & 18th Century Costume, Cut & Fashion Book name MacLochlainn System name Jason MacLochlainn Author name The Victorian Tailor: An Introduction to Period Tailoring Book name Joseph-Armstrong System name Helen Joseph-Armstrong Author name Patternmaking for Fashion Design Book name Supreme System System name Frederick T. Croonberg Author name The Blue Book of Men's Tailoring, Grand Edition of Supreme System for Producing Mens Garments (1907) Book name Sugino System name Dressmaking Author name Pattern Drafting Vols. I, II, III (Japan) Book name Centre Point System System name Louis Devere Author name The Handbook of Practical Cutting on the Centre Point System Book name Aldrich/Men System name Winifred Aldrich Author name Metric Pattern Cutting for Menswear Book name Aldrich/Women System name Metric Pattern Cutting for Women's Wear Book name Kershaw System name Gareth Kershaw Author name Patternmaking for Menswear Book name Gilewska System name Teresa Gilewska Author name Pattern-Drafting for Fashion: The Basics Book name Lo System name Dennic Chunman Lo Author name Pattern Cutting Book name Bray System name Natalie Bray Author name Dress Pattern Designing: The Basic Principles of Cut and Fit Book name Knowles/Men System name Lori A. Knowles Author name The Practical Guide to Patternmaking for Fashion Designers: Menswear Book name Friendship/Men System name Pattern Cutting for Men's Costume Book name Brown System name P. Clement Brown Author name Art in Dress Book name Mitchell System name Jno. J. Mitchell Author name "Standard" Work on Cutting (Men's Garments) 1886: The Art and Science of Garment Cutting Book name GOST 17917-86 System name Ministry of consumer industry of the USSR Author name Standard figure boys Book name Eddy System name Josephine F. Eddy and Elizabeth C. B. Wiley Author name Pattern and Dress Design Book name Knowles/Women System name Practical Guide to Patternmaking for Fashion Designers: Juniors, Misses, and Women Book name American Garment Cutter System name None System name Valentina team Author name Valentina's internal standard Book name Line_ Left symbol _ in name Viiva_ AngleLine_ Left symbol _ in name KulmaViiva_ Arc_ Left symbol _ in name Kaari_ Spl_ Left symbol _ in name Spl_ SplPath Do not add symbol _ to the end of name SplPath sin sine function sin cos cosine function cos tan tangens function tan asin arcus sine function asin acos arcus cosine function acos atan arcus tangens function atan sinh hyperbolic sine function sinh cosh hyperbolic cosine cosh tanh hyperbolic tangens function tanh asinh hyperbolic arcus sine function asinh acosh hyperbolic arcus tangens function acosh atanh hyperbolic arcur tangens function atanh log2 logarithm to the base 2 log2 log10 logarithm to the base 10 log10 log logarithm to the base 10 log ln logarithm to base e (2.71828...) ln exp e raised to the power of x exp sqrt square root of a value sqrt sign sign function -1 if x<0; 1 if x>0 sign rint round to nearest integer rint abs absolute value abs min min of all arguments min max max of all arguments max sum sum of all arguments sum avg mean value of all arguments avg fmod Returns the floating-point remainder of numer/denom (rounded towards zero) cm centimeter cm mm millimeter m in inch tuuma Line_ Left symbol _ in the name Viiva_ AngleLine_ Left symbol _ in the name KulmaViiva_ Arc_ Left symbol _ in the name Kaari_ Spl_ Left symbol _ in the name Spl_ SplPath Do not add symbol _ to the end of the name SplPath RadiusArc_ Left symbol _ in the name Angle1Arc_ Left symbol _ in the name Angle2Arc_ Left symbol _ in the name Angle1Spl_ Left symbol _ in the name Angle2Spl_ Left symbol _ in the name Angle1SplPath Do not add symbol _ to the end of the name Angle2SplPath Do not add symbol _ to the end of the name Seg_ Segment. Left symbol _ in the name CurrentLength Do not add space between words acosh hyperbolic arcus cosine function acosh C1LengthSpl_ Left symbol _ in the name C2LengthSpl_ Left symbol _ in the name C1LengthSplPath Do not add symbol _ to the end of the name C2LengthSplPath Do not add symbol _ to the end of the name CurrentSeamAllowance Do not add space between words degTorad converts degrees to radian radTodeg converts radian to degrees sin sine function working with radians sin cos cosine function working with radians cos tan tangens function working with radians tan asin arcus sine function working with radians asin acos arcus cosine function working with radians acos atan arcus tangens function working with radians atan sinD sine function working with degrees cosD cosine function working with degrees tanD tangens function working with degrees asinD arcus sine function working with degrees acosD arcus cosine function working with degrees atanD arcus tangens function working with degrees M_ Left symbol _ in the name Increment_ Left symbol _ in the name ElArc_ Left symbol _ in the name Radius1ElArc_ Left symbol _ in the name Radius2ElArc_ Left symbol _ in the name Angle1ElArc_ Left symbol _ in the name Angle2ElArc_ Left symbol _ in the name r2cm round to up to 1 decimal csrCm cut, split and rotate modeling operation. Takes cm units. csrInch cut, split and rotate modeling operation. Takes inch units. RotationElArc_ Left symbol _ in the name converts degrees to radian functionm degTorad converts radian to degrees function radTodeg sine function working with radians function sin cosine function working with radians function cos tangens function working with radians function tan arcus sine function working with radians function asin arcus cosine function working with radians function acos arcus tangens function working with radians function atan hyperbolic sine function function sinh hyperbolic cosine function cosh hyperbolic tangens function function tanh hyperbolic arcus sine function function asinh hyperbolic arcus cosine function function acosh hyperbolic arcur tangens function function atanh sine function working with degrees function sinD cosine function working with degrees function cosD tangens function working with degrees function tanD arcus sine function working with degrees function asinD arcus cosine function working with degrees function acosD arcus tangens function working with degrees function atanD logarithm to the base 2 function log2 logarithm to the base 10 function log10 logarithm to the base 10 function log logarithm to base e (2.71828...) function ln e raised to the power of x function exp square root of a value function sqrt sign function -1 if x<0; 1 if x>0 function sign round to nearest integer function rint round to up to 1 decimal function r2cm cut, split and rotate modeling operation. Takes cm units. function csrCm cut, split and rotate modeling operation. Takes inch units. function csrInch absolute value function abs min of all arguments function min max of all arguments function max sum of all arguments function sum mean value of all arguments function avg Returns the floating-point remainder of numer/denom (rounded towards zero) function fmod warning Calculation warning Show a warning in calculations function warning VVITConverter Unexpected version "%1". Yllättävä versio "%1". Error restoring backup file: %1. Virhe palauttaessa varmuuskopio tiedostoa: %1. VVSTConverter Unexpected version "%1". Yllättävä versio "%1". Error restoring backup file: %1. Virhe palauttaessa varmuuskopio tiedostoa: %1. VValentinaSettings layouts VWidgetBackgroundImages Form Transformation Translate Translate piece Horizontal: Vertical: Relative translation Scale Width: Leveys: Height: Korkeus: Scale proportionally Rotate Rotation Angle: Z Value Background image Hold Visible Reset transformation Delete Poista Hold All Unhold All Hide All Show All Pixels Pikseliä Millimiters Millimetriä Centimeters Senttimetriä Inches Tuumaa VWidgetDetails Form Unnamed Select all Select none select all details select none details Invert selection invert selection Hide not in layout Piece options Delete piece Cannot find piece by id '%1' VWidgetGroups Delete Poista Hide Show Hide All Show All Tags: Separate each tag with comma. Filter by tags Preferences Asetukset Categories: %1. VisToolCubicBezierPath Curved path: select seven or more points Curved path: select more points for complete segment Curved path: select seven or more points, %1 - finish creation VisToolCurveIntersectAxis Intersection curve and axis: angle = %1°; Shift - sticking angle, Enter - finish creation Leikkauskäyrä ja akseli: kulma = %1°; Siirto - kulma, Enter - Hyväksy luonti Intersection curve and axis: angle = %1°; %2 - sticking angle, %3 - finish creation VisToolEndLine Point at distance and angle: angle = %1°; Shift - sticking angle, Enter - finish creation Piste etäisyydellä ja kulmassa: kulma = %1°; Siirto - kulma, Enter - Hyväksy luonti Point at distance and angle: angle = %1°, length = %2%3; %4 - sticking angle, %5 - finish creation VisToolLineIntersectAxis Intersection line and axis: angle = %1°; Shift - sticking angle, Enter - finish creation Leikkausviiva ja akseli: kulma = %1°; Siirto - kulma, Enter - Hyväksy luonti Intersection line and axis: angle = %1°; %2 - sticking angle, %3 - finish creation VisToolMove Length = %1%2, angle = %3°, %4 - sticking angle, Mouse click - finish selecting a position Length = %1%2, angle = %3°, rotation angle = %4°, %5 - sticking angle, %6 - change rotation origin point, Mouse click - finish creating VisToolRotation Rotating angle = %1°, %2 - sticking angle, Mouse click - finish creation VisToolSpline Use %1 for sticking angle! VisToolSplinePath Curved path: select three or more points Käyräpolku: valitse ainakin kolme pistettä Curved path: select three or more points, Enter - finish creation Käyräpolku: Valitse ainakin kolme pistettä, Enter - Hyväksy luonti Curved path: select three or more points, %1 - finish creation Use %1 for sticking angle! WatermarkWindow Watermark Opacity: Text Text: watermark text Rotation: Font: The quick brown fox jumps over the lazy dog Use native text to test a font options Edit font Image Path: Polku: path to image Browse… Gray color &File &Tiedosto Operations Save Talenna Save &As… E&xit L&opeta Open Avaa New Uusi Images Watermark image File error. Tiedostovirhe. Watermark files Save as Talenna nimellä watermark Failed to lock. This file already opened in another window. Could not save file Tiedostoa ei voitu tallentaa Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. The document has no write permissions. Cannot set permissions for %1 to writable. Could not save the file. Could not save the file Open file Avaa tiedosto Unsaved changes The watermark has been modified. Do you want to save your changes? Don't Save read only untitled.vwm Confirm format rewriting This file is using previous format version v%1. The current is v%2. Saving the file with this app version will update the format version for this file. This may prevent you from be able to open the file with older app versions. Do you really want to continue? File saved Tiedosto tallennettu Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). Do you want to change the premissions? Color Väri Color: Black color Red color Dark red color Green color Dark green color Blue color Dark blue color Cyan color Dark cyan color Magenta color Dark magenta color Yellow color Dark yellow color Gray color Dark gray color Light gray color ZValueMoveBackgroundImage z value move a background image mNoisyHandler DEBUG: WARNING: CRITICAL: FATAL: INFO: Warning Varoitus Critical error Kriittinen virhe Fatal error Information vNoisyHandler DEBUG: WARNING: CRITICAL: FATAL: INFO: Warning Varoitus Critical error Kriittinen virhe Fatal error Information