AddDet add detail add detail AddGroup add group add group AddItemToGroup Add item to group AddPatternPiece add pattern piece %1 add pattern piece %1 AddPiece add detail add detail AddToCalc add object add object AddUnionDetails add union details add union details ChangeGroupOptions rename group ChangeGroupVisibility change group visibility ChangeMultipleGroupsVisibility change multiple groups visibility CommunityPage Server Server Server name/IP Server name/IP Secure connection Secure connection Proxy settings Proxy settings Use Proxy Use Proxy Proxy address Proxy address Proxy port Proxy port Proxy user Proxy user Proxy pass Proxy pass User settings User settings User Name User Name Save password Save password Password Password Server name/IP: Server name/IP: Proxy address: Proxy address: Proxy port: Proxy port: Proxy user: Proxy user: Proxy pass: Proxy pass: User Name: User Name: Password: Password: ConfigDialog Apply Apply &Cancel &Cancel &Ok &Ok Config Dialog Config Dialog Configuration Configuration Pattern Pattern Community Community Paths Paths ConfigurationPage Setup user interface language updated and will be used the next time start Setup user interface language updated and will be used the next time start Default unit updated and will be used the next pattern creation Default unit updated and will be used the next pattern creation Save Save Auto-save modified pattern Auto-save modified pattern min min Interval: Interval: Language Language GUI language GUI language Decimal separator parts Decimal separator parts With OS options (%1) With OS options (%1) Default unit Default unit Centimeters Centimeters Millimiters Millimiters Inches Inches Label language Label language Send crash reports Send crash reports Send crash reports (recommended) Send crash reports (recommended) After each crash Valentina collect information that may help us fix a problem. We do not collect any personal information. Find more about what <a href="https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports">kind of information</a> we collect. After each crash Valentina collect information that may help us fix a problem. We do not collect any personal information. Find more about what <a href="https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports">kind of information</a> we collect. Pattern Editing Pattern Editing Confirm item deletion Confirm item deletion Toolbar Toolbar The text appears under the icon. (recommended for beginners.) The text appears under the icon. (recommended for beginners.) GUI language: GUI language: Decimal separator parts: Decimal separator parts: Default unit: Default unit: Label language: Label language: Pattern making system Pattern making system Pattern making system: Pattern making system: Author: Author: Book: Book: The Default unit has been updated and will be used as the default for the next pattern you create. The Default unit has been updated and will be used as the default for the next pattern you create. After each crash Valentina collects information that may help us fix the problem. We do not collect any personal information. Find more about what <a href="https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports">kind of information</a> we collect. After each crash Valentina collects information that may help us fix the problem. We do not collect any personal information. Find more about what <a href="https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports">kind of information</a> we collect. The text appears under the icon (recommended for beginners). The text appears under the icon (recommended for beginners). After each crash Valentina collects information that may help us fix the problem. We do not collect any personal information. Find more about what %1kind of information%2 we collect. After each crash Valentina collects information that may help us fix the problem. We do not collect any personal information. Find more about what %1kind of information%2 we collect. DelGroup delete group delete group DelTool delete tool delete tool DeleteDetail delete tool delete tool DeletePatternPiece delete pattern piece %1 delete pattern piece %1 DeletePiece delete tool delete tool Detail Fabric Fabric Lining Lining Interfacing Interfacing Interlining Interlining DialogAboutApp About Valentina About Valentina Valentina version Valentina version Contributors Contributors Built on %3 at %4 Built on %3 at %4 Web site : %1 Web site : %1 Cannot open your default browser Cannot open your default browser Build revision: Build revision: Built on %1 at %2 Built on %1 at %2 Check For Updates Check For Updates DialogAboutTape About Tape About Tape Tape version Tape version Build revision: Build revision: This program is part of Valentina project. This program is part of Valentina project. Build revision: %1 Build revision: %1 Built on %3 at %4 Built on %3 at %4 Web site : %1 Web site : %1 Cannot open your default browser Cannot open your default browser Built on %1 at %2 Built on %1 at %2 Check For Updates Check For Updates DialogAlongLine Length Length Value of length Value of length <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Point label Point label First point First point First point of line First point of line Second point Second point Second point of line Second point of line Type of line Type of line Show line from first point to this point Show line from first point to this point Select second point of line Select second point of line Point at distance along line Point at distance along line Line color Line color Edit length Edit length Length: Length: Formula wizard Formula wizard Value Value Calculation Calculation Point label: Point label: First point: First point: First point of the line First point of the line Second point: Second point: Second point of the line Second point of the line Type of line: Type of line: Line color: Line color: Unique label Unique label Choose unique label. Choose unique label. DialogArc Arc Arc Radius Radius Value of radius Value of radius <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> First angle First angle Value of first angle Value of first angle Second angle Second angle Value of second angle Value of second angle Center point Center point Select point of center of arc Select point of center of arc Error Error Radius can't be negative Radius can't be negative Angles equal Angles equal Color Color Edit radius Edit radius Edit first angle Edit first angle Edit second angle Edit second angle Radius: Radius: Formula wizard Formula wizard Value Value Calulation Calulation First angle: First angle: Calculation Calculation Second angle: Second angle: Center point: Center point: Select center point of the arc Select center point of the arc Color: Color: Pen style: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value DialogArcWithLength Dialog Dialog Radius Radius Value of radius Value of radius <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> First angle First angle Value of first angle Value of first angle Length Length Arc length Arc length Center point Center point Select point of center of arc Select point of center of arc Color Color Edit radius Edit radius Edit the first angle Edit the first angle Edit the arc length Edit the arc length Error Error Radius can't be negative Radius can't be negative Length can't be equal 0 Length can't be equal 0 Radius: Radius: Formula wizard Formula wizard Value Value Calculation Calculation First angle: First angle: Length: Length: Center point: Center point: Color: Color: Pen style: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value DialogBisector Length Length Value of length Value of length <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Point label Point label First point First point First point of angle First point of angle Second point Second point Second point of angle Second point of angle Third point Third point Third point of angle Third point of angle Type of line Type of line Show line from second point to this point Show line from second point to this point Select second point of angle Select second point of angle Select third point of angle Select third point of angle Point along bisector Point along bisector Line color Line color Edit length Edit length Length: Length: Formula wizard Formula wizard Value Value Calculation Calculation Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. First point: First point: Second point: Second point: Third point: Third point: Type of line: Type of line: Line color: Line color: DialogCubicBezier Cubic bezier Cubic bezier Color: Color: Name: Name: First point: First point: Second point: Second point: Third point: Third point: Fourth point: Fourth point: Select the second point of curve Select the second point of curve Select the third point of curve Select the third point of curve Select the fourth point of curve Select the fourth point of curve Invalid spline Invalid spline Tool cubic bezier Tool cubic bezier Pen Style: Pen Style: Approximation Scale: Set approximation scale for this curve, 0 - use global value DialogCubicBezierPath Dialog cubic bezier path Dialog cubic bezier path Point: Point: List of points List of points Color: Color: Name: Name: Invalid spline path Invalid spline path Tool cubic bezier path Tool cubic bezier path Pen style: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Cannot find point with id %1 DialogCurveIntersectAxis Angle Angle Value of angle Value of angle <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Axis point Axis point Curve Curve Point label Point label Type of line Type of line Show line from first point to this point Show line from first point to this point Select axis point Select axis point Point intersect curve and axis Point intersect curve and axis Axis Point Axis Point Line color Line color Edit angle Edit angle Angle: Angle: Formula wizard Formula wizard Value Value Calculation Calculation Axis point: Axis point: Curve: Curve: Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Type of line: Type of line: Line color: Line color: DialogCutArc Length Length Value of length Value of length <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Arc Arc Point label Point label Segment an arc Segment an arc Selected arc Selected arc Color Color Edit length Edit length Length: Length: Formula wizard Formula wizard Value Value Calculation Calculation Arc: Arc: Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Color: Color: DialogCutSpline Length Length Value of length Value of length <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Curve Curve Selected curve Selected curve Point label Point label Segmenting a simple curve Segmenting a simple curve Color Color Edit length Edit length Length: Length: Formula wizard Formula wizard Value Value Calculation Calculation Curve: Curve: Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Color: Color: DialogCutSplinePath Length Length Value of length Value of length <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Curve Curve Selected curve path Selected curve path Point label Point label Segment a curved path Segment a curved path Color Color Edit length Edit length Length: Length: Formula wizard Formula wizard Value Value Calculation Calculation Curve: Curve: Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Color: Color: DialogDateTimeFormats Label date time editor Format: Insert a format <empty> DialogDetail Detail Detail Bias X Bias X cm cm Bias Y Bias Y Options Options Name of detail Name of detail Seam allowance Seam allowance Width Width Closed Closed Delete Delete Got wrong scene object. Ignore. Got wrong scene object. Ignore. Reverse Reverse Seam allowance tool Seam allowance tool All objects in path should follow in clockwise direction. All objects in path should follow in clockwise direction. Scroll down the list Scroll down the list ... ... Scroll up the list Scroll up the list Ready! Ready! You need more points! You need more points! First point can not equal the last point! First point can not equal the last point! You have double points! You have double points! You have to choose points in a clockwise direction! You have to choose points in a clockwise direction! Bias X: Bias X: Bias Y: Bias Y: Name of detail: Name of detail: Width: Width: First point cannot be equal to the last point! First point cannot be equal to the last point! General General Pattern piece data Pattern piece data Material/Cut number/Placement Material/Cut number/Placement Material type: Material type: Cut number: Cut number: Placement: Placement: Add Add Cancel Cancel Remove Remove Letter: Letter: Detail label visible Detail label visible Pattern label visible Pattern label visible Fabric Fabric Lining Lining Interfacing Interfacing Interlining Interlining None None Cut on fold Cut on fold Cut %1 of %2%3 Cut %1 of %2%3 on Fold on Fold Update Update on Fold on Fold You can choose one of the predefined materials or enter a new one You can choose one of the predefined materials or enter a new one Forbid piece be mirrored in a layout. Forbid piece be mirrored in a layout. Forbid flipping Forbid flipping Letter of pattern piece Letter of pattern piece Name can't be empty Name can't be empty Grainline Grainline Grainline visible Grainline visible Rotation: Rotation: Formula wizard Formula wizard Value Value Calculation Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Length: Length: Infinite/undefined result Infinite/undefined result Length should be positive Length should be positive Arrows: Arrows: Both Both Just front Just front Just rear Just rear DialogDimensionLabels Dimension labels Value Value Label DialogDuplicateDetail Dialog duplicate detail Click to place duplicate DialogEditLabel Edit label template Clear current and begin new label Import from label template Export label as template Edit Edit Bold Font formating Italic Font formating Aligns with the left edge Centers horizontally in the available space Aligns with the right edge Additional font size. Use to make a line bigger. Text: Line of text Insert placeholders Preview <empty> Create new template Creating new template will overwrite the current, do you want to continue? Label template Export label template template Could not save file Could not save file Import template Import template will overwrite the current, do you want to continue? File error. File error. Date Time Pattern name Pattern number Company name or designer name Customer name Pattern extension Pattern file name Measurments file name Size Size Height Height Measurments extension Piece letter Piece annotation Piece orientation Piece rotation Piece tilt Piece fold position Piece name Quantity Material: Fabric Fabric Fabric Material: Lining Lining Lining Material: Interfacing Interfacing Interfacing Material: Interlining Interlining Interlining Word: Cut Cut Cut Word: on fold on fold on fold User material Insert… Move on top Move up Move down Move on bottom Measurements units Pattern units Size units Customer birth date Customer email Hip Waist Measurement: %1 DialogEditWrongFormula Edit formula Edit formula Formula Formula Insert variable into formula Insert variable into formula Value of first angle Value of first angle <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Input data Input data Size and height Size and height Measurements Measurements Increments Increments Length of lines Length of lines Length of arcs Length of arcs Length of curves Length of curves Angle of lines Angle of lines Hide empty measurements Hide empty measurements Double click for add to formula Double click for add to formula Height Height Size Size Line length Line length Arc length Arc length Curve length Curve length Line Angle Line Angle Radius of arcs Radius of arcs Angles of arcs Angles of arcs Angles of curves Angles of curves Arc radius Arc radius Arc angle Arc angle Curve angle Curve angle Formula: Formula: Value Value Calculation Calculation Name Name Full name Full name Functions Functions Lengths to control points Lengths to control points Filter list by keyword Filter list by keyword Preview calculations DialogEllipticalArc Radius1: Radius1: Formula wizard Formula wizard Value Value Calulation Calulation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Radius2: Radius2: First angle: First angle: Calculation Calculation Second angle: Second angle: Rotation angle: Rotation angle: Center point: Center point: Select center point of the arc Select center point of the arc Color: Color: Edit radius1 Edit radius1 Edit radius2 Edit radius2 Edit first angle Edit first angle Edit second angle Edit second angle Edit rotation angle Edit rotation angle Elliptical arc Elliptical arc Pen style: Pen style: DialogEndLine Length Length Value of length Value of length <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Angle Angle Value of angle Value of angle Base point Base point First point of line First point of line Point label Point label Type of line Type of line Show line from first point to this point Show line from first point to this point Point at distance and angle Point at distance and angle Line color Line color Edit angle Edit angle Edit length Edit length Length: Length: Formula wizard Formula wizard Value Value Calculation Calculation Angle: Angle: Base point: Base point: Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Type of line: Type of line: Line color: Line color: DialogExportToCSV Export options Export options Export Export With header With header Codec: Codec: Separator Separator Tab Tab Comma Comma Semicolon Semicolon Space Space Options Options Preview Global Options DialogFinalMeasurements Final measurements Find: Find: Search Search Name Name The calculated value The calculated value Formula Formula Details Details Name: Name: Calculated value: Calculated value: Formula: Formula: Calculation Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Formula wizard Formula wizard Description: Description: Move measurement up Move measurement up Move measurement down Move measurement down measurement Error Error Empty field. Empty field. Edit measurement Edit measurement Empty field Empty field Invalid result. Value is infinite or NaN. Please, check your calculations. Invalid result. Value is infinite or NaN. Please, check your calculations. Value Value Parser error: %1 Parser error: %1 <html><head/><body>Search final measurements by term. Prepend "/r/" to the front of the search string to search final measurements by regex.</body></html> DialogFlippingByAxis Dialog Dialog Origin point: Origin point: Suffix: Suffix: Axis type: Axis type: Select origin point Select origin point Select origin point that is not part of the list of objects Select origin point that is not part of the list of objects Vertical axis Vertical axis Horizontal axis Horizontal axis Flipping by axis Flipping by axis Enable to create a visibility gropup from original objects Visibility Group Name: Name: Rotation Rotation Tags: Separate each tag with comma. Add tags DialogFlippingByLine Dialog Dialog First line point: First line point: Suffix: Suffix: Second line point: Second line point: Select first line point Select first line point Select first line point that is not part of the list of objects Select first line point that is not part of the list of objects Select second line point Select second line point Select second line point that is not part of the list of objects Select second line point that is not part of the list of objects Flipping by line Flipping by line Enable to create a visibility gropup from original objects Visibility Group Name: Name: Rotation Rotation Tags: Separate each tag with comma. Add tags DialogGroup Group Group Group name: Group name: Unique pattern piece name Unique pattern piece name Choose group name Choose group name New group New group Tags: Separate each tag with comma. Add tags DialogHeight Point label Point label Base point Base point First point of line First point of line Second point of line Second point of line Type of line Type of line Show line from first point to our point Show line from first point to our point Select first point of line Select first point of line Select second point of line Select second point of line Perpendicular point along line Perpendicular point along line Base Point Base Point Line color Line color Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Base point: Base point: First point of line: First point of line: Second point of line: Second point of line: Type of line: Type of line: Line color: Line color: DialogHistory History History Tool Tool Can't create record. Can't create record. %1 - Base point %1 - Base point %1_%2 - Line from point %1 to point %2 %1_%2 - Line from point %1 to point %2 %3 - Point along line %1_%2 %3 - Point along line %1_%2 %1 - Point of shoulder %1 - Point of shoulder %3 - normal to line %1_%2 %3 - normal to line %1_%2 %4 - bisector of angle %1_%2_%3 %4 - bisector of angle %1_%2_%3 %5 - intersection of lines %1_%2 and %3_%4 %5 - intersection of lines %1_%2 and %3_%4 Curve %1_%2 Curve %1_%2 Arc with center in point %1 Arc with center in point %1 Curve point %1 Curve point %1 %4 - point of contact of arc with the center in point %1 and line %2_%3 %4 - point of contact of arc with the center in point %1 and line %2_%3 Point of perpendicular from point %1 to line %2_%3 Point of perpendicular from point %1 to line %2_%3 Triangle: axis %1_%2, points %3 and %4 Triangle: axis %1_%2, points %3 and %4 %1 - point of intersection %2 and %3 %1 - point of intersection %2 and %3 %1 - cut arc with center %2 %1 - cut arc with center %2 %1 - cut curve %2_%3 %1 - cut curve %2_%3 %1 - cut curve path %2 %1 - cut curve path %2 %1 - point of intersection line %2_%3 and axis through point %4 %1 - point of intersection line %2_%3 and axis through point %4 %1 - point of intersection curve and axis through point %2 %1 - point of intersection curve and axis through point %2 Arc with center in point %1 and length %2 Arc with center in point %1 and length %2 %1 - point of arcs intersection %1 - point of arcs intersection %1 - point of circles intersection %1 - point of circles intersection %1 - point from circle and tangent %1 - point from circle and tangent %1 - point from arc and tangent %1 - point from arc and tangent Correction the dart %1_%2_%3 Correction the dart %1_%2_%3 %1 - point of curves intersection %1 - point of curves intersection Curve Curve Cubic bezier curve Cubic bezier curve Arc Arc %1 with length %2 %1 with length %2 Spline path Spline path Cubic bezier curve path Cubic bezier curve path %1 - cut %2 %1 - cut %2 arc arc curve curve curve path curve path Elliptical arc Elliptical arc Rotate objects around point %1. Suffix '%2' Flipping by line %1_%2. Suffix '%3' Flipping by axis through %1 point. Suffix '%2' Move objects. Suffix '%1' DialogIncrements Increments Increments Name Name The calculated value The calculated value Lines Lines Line Line Length Length Curve Curve Arc Arc Tables of Variables Tables of Variables Lines angles Lines angles Angle Angle Lengths curves Lengths curves Angles curves Angles curves Lengths arcs Lengths arcs Radiuses arcs Radiuses arcs Radius Radius Angles arcs Angles arcs Formula Formula Details Details Move measurement up Move measurement up Move measurement down Move measurement down Name: Name: Calculated value: Calculated value: Formula: Formula: <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Description: Description: Error Error Empty field. Empty field. Empty field Empty field Value Value Parser error: %1 Parser error: %1 Increment_%1 Increment_%1 Edit increment Edit increment Unique increment name Unique increment name Calculation Calculation Formula wizard Formula wizard Invalid value Invalid value Find: Find: Search Search Curves control point lengths Curves control point lengths Invalid result. Value is infinite or NaN. Please, check your calculations. Invalid result. Value is infinite or NaN. Please, check your calculations. Refresh a pattern with all changes you made Refresh Preview calculations Unique variable name <html><head/><body>Search increments by term. Prepend "/r/" to the front of the search string to search increments by regex.</body></html> <html><head/><body>Search preview calculations by term. Prepend "/r/" to the front of the search string to search preview calculations by regex.</body></html> Increment Separator Separator DialogInsertNode Insert node Insert node Item: Item: Piece: Piece: Uknown Uknown The list of pieces is empty. Please, first create at least one piece for current pattern piece. DialogKnownMaterials Known materials Material: Name of material User material DialogLayoutProgress Couldn't prepare data for creation layout Couldn't prepare data for creation layout Several workpieces left not arranged, but none of them match for paper Several workpieces left not arranged, but none of them match for paper Create a Layout Create a Layout <html><head/><body>Finding best position for worpieces. Please, wait.</body></html> <html><head/><body>Finding best position for worpieces. Please, wait.</body></html> Arranged workpieces: %1 from %2 Arranged workpieces: %1 from %2 Nesting. Please, wait. Time left: Time left: %1 Efficiency coefficient: %1% DialogLayoutScale Layout scale Margins Left: Left: cm cm Right: Right: Top: Top: Bottom: Bottom: Scale Horizontal: Vertical: DialogLayoutSettings Paper size Paper size Templates: Templates: Width: Width: Height: Height: Rotate workpiece Rotate workpiece Rotate by Rotate by degree degree Creation options Creation options Shift length: Shift length: Principle of choosing the next workpiece Principle of choosing the next workpiece Three groups: big, middle, small Three groups: big, middle, small Two groups: big, small Two groups: big, small Descending area Descending area Millimiters Millimiters Centimeters Centimeters Inches Inches Pixels Pixels Create a layout Create a layout Auto crop unused length Auto crop unused length Unite pages (if possible) Unite pages (if possible) Gap width: Gap width: Save length of the sheet Save length of the sheet Letter Letter Legal Legal Roll 24in Roll 24in Roll 30in Roll 30in Roll 36in Roll 36in Roll 42in Roll 42in Roll 44in Roll 44in Three groups: big, middle, small = 0 Two groups: big, small = 1 Descending area = 2 Three groups: big, middle, small = 0 Two groups: big, small = 1 Descending area = 2 Paper format Paper format Fields Fields Left: Left: Right: Right: Top: Top: Bottom: Bottom: Ignore fileds Ignore fileds Custom Custom Wrong fields. Wrong fields. Fields go beyond printing. Apply settings anyway? Fields go beyond printing. Apply settings anyway? Three groups: big, middle, small = 0; Two groups: big, small = 1; Descending area = 2 Three groups: big, middle, small = 0; Two groups: big, small = 1; Descending area = 2 Layout options Layout options Shift/Offset length: Shift/Offset length: Rule for choosing the next workpiece Rule for choosing the next workpiece Enabling for sheets that have big height will speed up creating. Enabling for sheets that have big height will speed up creating. Divide into strips Divide into strips Multiplier Multiplier Set multiplier for length of the biggest workpiece in layout. Set multiplier for length of the biggest workpiece in layout. x x Enabling for sheets that have big height will speed up creating. Enabling for sheets that have big height will speed up creating. Printer: Printer: None Printer None Text Text will be converted to paths Export text as paths Margins Ignore margins Margins go beyond printing. Apply settings anyway? Follow grainline Time: Time given for the algorithm to find best layout. Efficiency: Set layout efficiency coefficient. Layout efficiency coefficientt is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Manual priority Nest quantity of copies according to piece settings. Nest quantity Auto crop unused width Prefer one sheet solution min minutes Enable this option to prefer getting one sheet solutions. DialogLine First point First point Second point Second point Type of line Type of line Show line from first point to this point Show line from first point to this point Select second point Select second point Line between points Line between points Line color Line color First point: First point: Second point: Second point: Type of line: Type of line: Line color: Line color: DialogLineIntersect Point label Point label First line First line First point First point Second point Second point Second line Second line Select second point of first line Select second point of first line Select first point of second line Select first point of second line Select second point of second line Select second point of second line Point at line intersection Point at line intersection Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. First point: First point: Second point: Second point: DialogLineIntersectAxis Angle Angle Value of angle Value of angle <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Axis point Axis point First point of line First point of line First line point First line point Second line point Second line point Point label Point label Type of line Type of line Show line from first point to this point Show line from first point to this point Select second point of line Select second point of line Select axis point Select axis point Point intersect line and axis Point intersect line and axis Axis Point Axis Point Second point of line Second point of line Line color Line color Edit angle Edit angle Angle: Angle: Formula wizard Formula wizard Value Value Calculation Calculation Axis point: Axis point: First line point: First line point: Second line point: Second line point: Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Type of line: Type of line: Line color: Line color: DialogMDataBase Measurement data base Measurement data base Measurements Measurements Direct Height Measurement section Direct Height Direct Width Measurement section Direct Width Indentation Measurement section Indentation Circumference and Arc Measurement section Circumference and Arc Vertical Measurement section Vertical Horizontal Measurement section Horizontal Bust Measurement section Bust Balance Measurement section Balance Arm Measurement section Arm Leg Measurement section Leg Crotch and Rise Measurement section Crotch and Rise Hand Measurement section Hand Foot Measurement section Foot Head Measurement section Head Men & Tailoring Measurement section Men & Tailoring Historical & Specialty Measurement section Historical & Specialty Patternmaking measurements Measurement section Patternmaking measurements Collapse All Collapse All Expand All Expand All Check all Check all Uncheck all Uncheck all Search: Search Search Select measurement DialogMeasurementsCSVColumns Setup columns Preview Input Import Columns Full name: Full name: Description: Description: Ready Name Name Value Value Full name Full name Description Description Base value Base value Shift (%1): Skip Shift (%1)*: File path is empty Not enough columns Not enough data to import Please, select unique number for each column DialogMove Dialog Dialog Angle: Angle: Formula wizard Formula wizard Value Value <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Length: Length: Suffix: Suffix: Edit angle Edit angle Edit length Edit length Calculation Calculation Move Move Rotation angle: Rotation angle: Edit rotation angle Edit rotation angle Rotation origin point: Center point Center point Enable to create a visibility gropup from original objects Visibility Group Name: Name: Rotation Rotation Tags: Separate each tag with comma. Add tags DialogNewMeasurements New measurement file New measurement file Measurement type: Measurement type: Unit: Unit: Base size: Base size: Base height: Base height: Individual Individual Standard Standard Centimeters Centimeters Millimiters Millimiters Inches Inches Multisize DialogNewPattern Individual measurements Individual measurements Pattern piece name Pattern piece name Units: Units: Centimeters Centimeters Millimiters Millimiters Inches Inches Pattern piece name: Pattern piece name: Unique pattern piece name Unique pattern piece name Choose unique pattern piece name. Choose unique pattern piece name. New pattern New pattern DialogNormal Length Length Value of length Value of length <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Point label Point label First point First point Second point Second point Additional angle degrees Additional angle degrees Type of line Type of line Show line from first point to this point Show line from first point to this point Select second point of line Select second point of line Point along perpendicular Point along perpendicular First point of line First point of line Second point of line Second point of line Line color Line color Edit length Edit length Length: Length: Formula wizard Formula wizard Value Value Calculation Calculation Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. First point: First point: Second point: Second point: Additional angle degrees: Additional angle degrees: Type of line: Type of line: Line color: Line color: DialogPatternMaterials Dialog Dialog Placeholder Value Value DialogPatternProperties Pattern properties Pattern properties Description Description Author name Author name Pattern description Pattern description For technical notes. For technical notes. Heights and Sizes Heights and Sizes All heights (cm) All heights (cm) All sizes (cm) All sizes (cm) Default height and size Default height and size From standard measurements From standard measurements Custom Custom Height: Height: Size: Size: Security Security Open only for read Open only for read Call context menu for edit Call context menu for edit No image No image Delete image Delete image Change image Change image Save image to file Save image to file Show image Show image Image for pattern Image for pattern Images (*.png *.jpg *.jpeg *.bmp) Images (*.png *.jpg *.jpeg *.bmp) Images Images Save File Save File untitled untitled Path: Path: Show in Explorer Show in Explorer <Empty> <Empty> File was not saved yet. File was not saved yet. Show in Finder Show in Finder General info General info Pattern name: Pattern name: Pattern number: Pattern number: Company/Designer name: Company/Designer name: Customer name: Customer name: Created: Created: Pattern size: Pattern size: Show measurements Show measurements Show date of creation Show date of creation Use %1 and %2 to insert pattern size and height Use %1 and %2 to insert pattern size and height Show date of layout creation (%1) Show date of layout creation (%1) Show measurements file Show measurements file Pattern Pattern For technical notes Label data Label template: Edit pattern label Edit template Date format: Time format: Save label data. Label data were changed. Do you want to save them before editing label template? Materials Pattern materials: Manage list of pattern materials Manage The customer name from individual measurements Label language: Label language: Customer birth date: yyyy-MM-dd yyyy-MM-dd Customer email: The customer email from individual measurements The customer birth date from individual measurements DialogPatternXmlEdit XML Editor XML Editor Value : Value : Name : Name : <No selection> <No selection> Type : Type : Add attribute Add attribute Add son Add son Remove attribute Remove attribute Remove node Remove node Set Set Cancel Cancel Apply changes Apply changes Undo last Undo last Immediate apply Immediate apply Base selection Base selection All pattern pieces All pattern pieces No changes No changes Cannot delete previously created node Cannot delete previously created node No changes left No changes left Cannot undo change Cannot undo change <no value> <no value> Unchanged Unchanged Cannot delete previously created attribute Cannot delete previously created attribute Node Name Node Name Name: Name: Node Value (may be empty) Node Value (may be empty) Value: Value: Attribute Name Attribute Name Attribute Value Attribute Value No selection No selection Root node Root node Node Node Attribute Attribute Immediately apply Immediately apply Type: Type: Type: Type: DialogPiecePath Piece path tool Piece path tool Path Path Name: Name: Unnamed path Unnamed path Create name for your path Create name for your path Type: Type: Piece: Piece: Type of pen: Type of pen: Ready! Ready! Seam allowance Seam allowance Width: Width: Formula wizard Formula wizard Value Value Calculation Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Nodes Nodes Node: Node: Before: Before: Return to default width Return to default width Default Default After: After: Angle: Angle: Reverse Reverse Delete Delete Edit seam allowance width Edit seam allowance width Edit seam allowance width before Edit seam allowance width before Edit seam allowance width after Edit seam allowance width after Internal path Internal path Custom seam allowance Custom seam allowance You need more points! You need more points! First point of custom seam allowance cannot be equal to the last point! First point of custom seam allowance cannot be equal to the last point! You have double points! You have double points! Passmarks Passmarks Passmark: Passmark: One line One line Two lines Two lines Three lines Three lines Angle Angle Straightforward Straightforward Bisector Bisector Passmark Passmark Marks Marks T mark T mark V mark V mark Please, select a detail to insert into! Please, select a detail to insert into! List of details is empty! List of details is empty! Select if need designate the corner point as a passmark Select if need designate the corner point as a passmark Intersection Intersection Each point in the custom seam allowance path must be unique! Each point in the custom seam allowance path must be unique! Cut on fabric Select if need designate the corner point as a passmark. Show only left passmark. Intersection (only left) Select if need designate the corner point as a passmark. Show only right passmark. Intersection (only right) Control Visible Create a formula that regulates visibility. Values different from "0" make a path visible. 1 Control visibility Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Check uniqueness Move on top Move up Move down Move on bottom Continue the first point to the cutting contour Continue the last point to the cutting contour The path is a cut contour. Use to control export to DXF-AAMA The list of pieces is empty. Please, first create at least one piece for current pattern piece. This option has effect only if the second passmark on seam line enabled in global preferences. The option helps disable the second passmark for this passmark only. This option has effect only if the second passmark on seam line enabled in global preferences. The option helps disable the second passmark for this passmark only. Show the second passmark on seam line Show the second passmark on seam line Excluded Excluded The same curve repeats twice! <Empty> <Empty> Current seam allowance Current seam allowance Acute angle that looks inside of piece Acute angle that looks outside of piece V mark 2 Select main path objects, %1 - reverse direction curve, %2 - finish creation Manual length Length: Length: U mark Box mark Edit passmark length DialogPin Pin tool Pin tool Point: Point: Piece: Piece: Pin Pin The list of pieces is empty. Please, first create at least one piece for current pattern piece. DialogPlaceLabel Width: Width: Formula wizard Formula wizard Value Value Calculation Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Height: Height: Angle: Angle: 0 Point: Point: Piece: Piece: Type: Type: Edit rectangle width Edit angle Edit angle Segment Rectangle Cross T-shaped Doubletree Corner Triangle H-shaped Button Place label Control Visible Create a formula that regulates visibility. Values different from "0" make a path visible. 1 The list of pieces is empty. Please, first create at least one piece for current pattern piece. Control visibility Circle DialogPointFromArcAndTangent Point from arc and tangent Point from arc and tangent Point label Point label Tangent point Tangent point Arc Arc Select point of center of arc Select point of center of arc Take Take Select an arc Select an arc Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Tangent point: Tangent point: Arc: Arc: Take: Take: DialogPointFromCircleAndTangent Point from circle and tangent Point from circle and tangent Radius Radius <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Point label Point label Center of the circle Center of the circle Select point of center of arc Select point of center of arc Tangent point Tangent point Take Take Select a circle center Select a circle center Edit radius Edit radius Error Error Radius can't be negative Radius can't be negative Radius: Radius: Formula wizard Formula wizard Value Value Calculation Calculation Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Center of the circle: Center of the circle: Tangent point: Tangent point: Take: Take: DialogPointOfContact Radius Radius Value of radius Value of radius <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Point label Point label Center of arc Center of arc Select point of center of arc Select point of center of arc Top of the line Top of the line End of the line End of the line Select second point of line Select second point of line Point at intersection of arc and line Point at intersection of arc and line Edit radius Edit radius Radius: Radius: Formula wizard Formula wizard Value Value Calculation Calculation Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Center of arc: Center of arc: Top of the line: Top of the line: End of the line: End of the line: DialogPointOfIntersection Point label Point label First point of angle First point of angle Second point of angle Second point of angle Point from X and Y of two other points Point from X and Y of two other points X: vertical point X: vertical point Y: horizontal point Y: horizontal point Select point for Y value (horizontal) Select point for Y value (horizontal) Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. X: vertical point: X: vertical point: Y: horizontal point: Y: horizontal point: DialogPointOfIntersectionArcs Dialog Dialog Point label Point label First arc First arc Selected arc Selected arc Second arc Second arc Take Take Select second an arc Select second an arc Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. First arc: First arc: Second arc: Second arc: Take: Take: Tool point of intersetion arcs Tool point of intersetion arcs DialogPointOfIntersectionCircles Dialog Dialog Radius of the first circle Radius of the first circle <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Radius of the second circle Radius of the second circle Point label Point label Center of the first circle Center of the first circle Select point of center of arc Select point of center of arc Center of the second circle Center of the second circle Take Take Select second circle center Select second circle center Edit first circle radius Edit first circle radius Edit second circle radius Edit second circle radius Error Error Radius can't be negative Radius can't be negative Radius of the first circle: Radius of the first circle: Formula wizard Formula wizard Value Value Calculation Calculation Radius of the second circle: Radius of the second circle: Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Center of the first circle: Center of the first circle: Center of the second circle: Center of the second circle: Take: Take: Tool point of intersection circles Tool point of intersection circles DialogPointOfIntersectionCurves Tool point of intersection curves Tool point of intersection curves First curve: First curve: Second curve: Second curve: Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. Vertical correction: Vertical correction: Horizontal correction: Horizontal correction: Select second curve Select second curve DialogPreferences Preferences Preferences Configuration Configuration Pattern Pattern Paths Paths Followed %n option(s) require restart to take effect: %1. DialogRestrictDimension Restrict dimension Dimension A: Restriction Min: Max: DialogRotation Rotation Rotation Angle: Angle: Formula wizard Formula wizard Value Value Calulation Calulation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Origin Point: Origin Point: Suffix: Suffix: Edit angle Edit angle Select origin point Select origin point Select origin point that is not part of the list of objects Select origin point that is not part of the list of objects Calculation Calculation This point cannot be origin point. Please, select another origin point Enable to create a visibility gropup from original objects Visibility Group Name: Name: Tags: Separate each tag with comma. Add tags DialogSaveLAyout Save Layout Save Layout File name: File name: Path: Path: File format: File format: Browse... Browse... TextLabel TextLabel Destination folder Destination folder Path to destination folder. Path to destination folder. Select path to destination folder Select path to destination folder File base name File base name File base name. File base name. File base name. File base name. Path to destination folder Path to destination folder Binary form Text as paths Margins Right: Right: Left: Left: Top: Top: Bottom: Bottom: Paper format Paper format Browse… cm cm Templates: Templates: Orientation: Options Options Scale Horizontal: Vertical: DialogSaveLayout Name conflict Name conflict Folder already contain file with name %1. Rewrite all conflict file names? Folder already contain file with name %1. Rewrite all conflict file names? Example: Example: Select folder Select folder Svg files (*.svg) Svg files (*.svg) PDF files (*.pdf) PDF files (*.pdf) Images (*.png) Images (*.png) Wavefront OBJ (*.obj) Wavefront OBJ (*.obj) PS files (*.ps) PS files (*.ps) EPS files (*.eps) EPS files (*.eps) DXF files (*.dxf) DXF files (*.dxf) Tried to use out of range format number. Tried to use out of range format number. Selected not present format. Selected not present format. The base filename has not match regular expression. The base filename has not match regular expression. The destination directory doesn't exists or is not readable. The destination directory doesn't exists or is not readable. The base filename does not match a regular expression. The base filename does not match a regular expression. files files (flat) files Image files tiled Numerical control DialogSeamAllowance Ready! Ready! Value Value Detail Detail Grainline Grainline Reverse Reverse Delete Delete Options Options Error. Can't save piece path. Error. Can't save piece path. Infinite/undefined result Infinite/undefined result Length should be positive Length should be positive Parser error: %1 Parser error: %1 Current seam allowance Current seam allowance Edit seam allowance width Edit seam allowance width Edit seam allowance width before Edit seam allowance width before Edit seam allowance width after Edit seam allowance width after You need more points! You need more points! You have to choose points in a clockwise direction! You have to choose points in a clockwise direction! First point cannot be equal to the last point! First point cannot be equal to the last point! You have double points! You have double points! Empty Empty main path main path custom seam allowance custom seam allowance Both Both Just front Just front Just rear Just rear Pins Pins no pin no pin Labels Labels Error Error Edit length Edit length Edit angle Edit angle Edit height Edit height Edit width Edit width Paths Paths Excluded Excluded Passmark Passmark Each point in the path must be unique! Each point in the path must be unique! Passmarks Passmarks Workpiece tool Segment Rectangle Cross T-shaped Doubletree Corner Triangle H-shaped Button Place label Check uniqueness To open all detail's features complete creating the main path. Please, press OK. The same curve repeats twice! <Empty> <Empty> Select main path objects clockwise, %1 - reverse direction curve, %2 - finish creation Circle Edit passmark length DialogSetupMultisize Setup multisize measurements Use full circumference Height Height Min value: Minimal value described in the column Max value: Maximal value described in the column Step: Single-step between the column values Base: The base value for the column Size Size Circumference Hip Waist Please, provide correct data for dimensions Please, select at least one dimension No more than 3 dimensions allowed Ready DialogShoulderPoint Length Length Value of length Value of length <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Point label Point label First point First point Second point Second point Third point Third point Type of line Type of line Show line from first point to our point Show line from first point to our point Select first point of line Select first point of line Select second point of line Select second point of line Special point on shoulder Special point on shoulder Line color Line color Edit length Edit length Length: Length: Formula wizard Formula wizard Value Value Calculation Calculation Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. First point: First point: Second point: Second point: Third point: Third point: Type of line: Type of line: Line color: Line color: DialogSinglePoint Single point Single point Coordinates on the sheet Coordinates on the sheet Coordinates Coordinates Y coordinate Y coordinate X coordinate X coordinate Point label Point label Unique label Unique label Choose unique label. Choose unique label. DialogSpline First point First point Length ratio of the first control point Length ratio of the first control point The angle of the first control point The angle of the first control point Second point Second point Length ratio of the second control point Length ratio of the second control point The angle of the second control point The angle of the second control point Coefficient of curvature of the curve Coefficient of curvature of the curve Select last point of curve Select last point of curve Simple curve Simple curve Color Color Coefficient of curvature of the curve: Coefficient of curvature of the curve: Color: Color: First point: First point: Control point Control point Angle: Angle: Length ratio: Length ratio: Second point: Second point: Name: Name: Invalid spline Invalid spline Length: Length: Formula wizard Formula wizard Value Value Calulation Calulation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Edit first control point angle Edit first control point angle Edit second control point angle Edit second control point angle Edit first control point length Edit first control point length Edit second control point length Edit second control point length Error Error Length can't be negative Length can't be negative Calculation Calculation Pen style: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value DialogSplinePath Curved path Curved path Point of curve Point of curve Length ratio of the first control point Length ratio of the first control point The angle of the first control point The angle of the first control point Length ratio of the second control point Length ratio of the second control point The angle of the second control point The angle of the second control point List of points List of points Coefficient of curvature of the curve Coefficient of curvature of the curve Select point of curve path Select point of curve path Color Color Coefficient of curvature of the curve: Coefficient of curvature of the curve: Color: Color: Point: Point: First control point First control point Angle: Angle: Length ratio: Length ratio: Second control point Second control point Name: Name: Invalid spline path Invalid spline path Length: Length: Formula wizard Formula wizard Value Value Calulation Calulation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Edit first control point angle Edit first control point angle Edit second control point angle Edit second control point angle Edit first control point length Edit first control point length Edit second control point length Edit second control point length Error Error Length can't be negative Length can't be negative Not used Not used Calculation Calculation Pen style: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value Cannot find point with id %1 DialogTapePreferences Preferences Preferences Configuration Configuration Paths Paths Followed %n option(s) require restart to take effect: %1. DialogTool Error Error Empty field Empty field Value can't be 0 Value can't be 0 Value Value Parser error: %1 Parser error: %1 First point First point Second point Second point Highest point Highest point Lowest point Lowest point Leftmost point Leftmost point Rightmost point Rightmost point Invalid value Invalid value by length by length by points intersetions by points intersetions by first edge symmetry by first edge symmetry by second edge symmetry by second edge symmetry by first edge right angle by first edge right angle by second edge right angle by second edge right angle DialogTriangle Point label Point label First point of axis First point of axis First point of line First point of line Second point of axis Second point of axis First point First point Second point Second point Select second point of axis Select second point of axis Select first point Select first point Select second point Select second point Triangle tool Triangle tool First point of the axis First point of the axis Second point of the axis Second point of the axis Second point of line Second point of line Point label: Point label: Unique label Unique label Choose unique label. Choose unique label. First point of axis: First point of axis: Second point of axis: Second point of axis: First point: First point: Second point: Second point: DialogTrueDarts True darts True darts First base point First base point First point of angle First point of angle Second base point Second base point Second point of angle Second point of angle First dart point First dart point Third point of angle Third point of angle Second dart point Second dart point Show line from second point to this point Show line from second point to this point Third dart point Third dart point First new dart point First new dart point Second new dart point Second new dart point Select the second base point Select the second base point Select the first dart point Select the first dart point Select the second dart point Select the second dart point Select the third dart point Select the third dart point First base point: First base point: Second base point: Second base point: First dart point: First dart point: Second dart point: Second dart point: Third dart point: Third dart point: First new dart point: First new dart point: Unique label Unique label Choose unique label. Choose unique label. Second new dart point: Second new dart point: DialogUndo Broken formula Broken formula Error while calculation formula. You can try undo last operation or fix broken formula. Error while calculation formula. You can try undo last operation or fix broken formula. &Undo &Undo &Fix formula &Fix formula &Cancel &Cancel Error while calculation formula. You can try to undo last operation or fix broken formula. Error while calculation formula. You can try to undo last operation or fix broken formula. DialogUnionDetails <html><head/><body>Do you really want union details?</body></html> <html><head/><body>Do you really want union details?</body></html> Union tool Union tool Select a first point Select a first point Workpiece should have at least two points and three objects Workpiece should have at least two points and three objects Select a second point Select a second point Select a unique point Select a unique point Select a detail Select a detail Select a point on edge Select a point on edge <html><head/><body>Do you really want to unite details?</body></html> <html><head/><body>Do you really want to unite details?</body></html> Retain original pieces Retain original pieces FvUpdateWindow Software Update Software Update A new version of %1 is available! A new version of %1 is available! %1 %2 is now available - you have %3. Would you like to download it now? %1 %2 is now available - you have %3. Would you like to download it now? Skip This Version Skip This Version Remind Me Later Remind Me Later Get Update Get Update %1 update is available! FvUpdater Cannot open your default browser. Cannot open your default browser. Feed download failed: %1. Feed download failed: %1. Feed parsing failed: %1 %2. Feed parsing failed: %1 %2. No updates were found. No updates were found. Feed error: invalid "enclosure" with the download link Feed error: invalid "enclosure" with the download link Error Error Information Information InternalStrings The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MApplication Error parsing file. Program will be terminated. Error parsing file. Program will be terminated. Error bad id. Program will be terminated. Error bad id. Program will be terminated. Error can't convert value. Program will be terminated. Error can't convert value. Program will be terminated. Error empty parameter. Program will be terminated. Error empty parameter. Program will be terminated. Error wrong id. Program will be terminated. Error wrong id. Program will be terminated. Something's wrong!! Something's wrong!! Parser error: %1. Program will be terminated. Parser error: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. Valentina's measurements editor. Valentina's measurements editor. The measurement file. The measurement file. The base height The base height The base size The base size Set pattern file unit: cm, mm, inch. Set pattern file unit: cm, mm, inch. The pattern unit The pattern unit Use for unit testing. Run the program and open a file without showing a window. Use for unit testing. Run the program and open a file without showing a window. Invalid base size argument. Must be cm, mm or inch. Invalid base size argument. Must be cm, mm or inch. Can't begin to listen for incoming connections on name '%1' Can't begin to listen for incoming connections on name '%1' Test mode doesn't support openning several files. Test mode doesn't support openning several files. Please, provide one input file. Please, provide one input file. Open with the base size. Valid values: %1cm. Open with the base size. Valid values: %1cm. Invalid base height argument. Must be %1cm. Invalid base height argument. Must be %1cm. Invalid base size argument. Must be %1cm. Invalid base size argument. Must be %1cm. Open with the base height. Valid values: %1cm. Open with the base height. Valid values: %1cm. Use for unit testing. Run the program and open a file without showing the main window. Use for unit testing. Run the program and open a file without showing the main window. Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Set base for dimension A in the table units. The dimension A base Set base for dimension B in the table units. The dimension B base Set base for dimension C in the table units. The dimension C base Set pattern file units: cm, mm, inch. The pattern units Invalid dimension A base value. Invalid dimension B base value. Invalid dimension C base value. MainWindow Valentina Valentina Tools for creating points. Tools for creating points. Point Point Point along perpendicular Point along perpendicular Perpendicular point along line Perpendicular point along line Point along bisector Point along bisector Point at distance and angle Point at distance and angle Point at distance along line Point at distance along line Tools for creating lines. Tools for creating lines. Line Line Line between points Line between points Point at line intersection Point at line intersection Tools for creating curves. Tools for creating curves. Curve Curve Tools for creating arcs. Tools for creating arcs. Arc Arc Tools for creating details. Tools for creating details. Detail Detail &File &File &Help &Help &Pattern piece &Pattern piece Measurements Measurements Window Window Toolbar files Toolbar files ToolBar modes ToolBar modes Toolbar pattern Toolbar pattern Toolbar options Toolbar options Toolbar tools Toolbar tools Tool options Tool options New New &New &New Create a new pattern Create a new pattern Open Open &Open &Open Open file with pattern Open file with pattern Save Save &Save &Save Save pattern Save pattern Save &As... Save &As... Save not yet saved pattern Save not yet saved pattern Draw Draw Details Details Pointer tools Pointer tools New pattern piece New pattern piece Add new pattern piece Add new pattern piece Change the label of pattern piece Change the label of pattern piece Table of variables Table of variables Tables of variables Tables of variables History History About &Qt About &Qt &About Valentina &About Valentina E&xit E&xit Exit the application Exit the application Preferences Preferences Pattern properties Pattern properties Zoom in Zoom in zoom in zoom in Zoom out Zoom out Edit pattern XML code Edit pattern XML code Original zoom Original zoom Original Zoom Original Zoom Zoom fit best Zoom fit best Stop Stop Stop using tool Stop using tool Repot Bug... Repot Bug... Report bug Report bug Close window Close window Online help Online help Show online help Show online help Pattern piece %1 Pattern piece %1 Select point Select point Select first point Select first point Select first point of line Select first point of line Select first point of angle Select first point of angle Select first point of first line Select first point of first line Select first point curve Select first point curve Select simple curve Select simple curve Select point of center of arc Select point of center of arc Select point of curve path Select point of curve path Select curve path Select curve path Select points, arcs, curves clockwise. Select points, arcs, curves clockwise. Select base point Select base point Select first point of axis Select first point of axis Select detail Select detail Select arc Select arc Select curve Select curve About Qt About Qt Height: Height: Size: Size: Pattern Piece: Pattern Piece: Pattern files (*.val) Pattern files (*.val) pattern pattern Save as Save as Could not save file Could not save file Open file Open file Error parsing file. Error parsing file. Error can't convert value. Error can't convert value. Error empty parameter. Error empty parameter. Error wrong id. Error wrong id. Error parsing file (std::bad_alloc). Error parsing file (std::bad_alloc). Bad id. Bad id. File saved File saved untitled.val untitled.val The pattern has been modified. Do you want to save your changes? The pattern has been modified. Do you want to save your changes? &Undo &Undo &Redo &Redo Pattern piece: Pattern piece: Enter a new label for the pattern piece. Enter a new label for the pattern piece. This file already opened in another window. This file already opened in another window. Wrong units. Wrong units. Application doesn't support standard table with inches. Application doesn't support standard table with inches. File error. File error. File loaded File loaded Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Reopen files. Reopen files. Standard measurements (*.vst) Standard measurements (*.vst) Individual measurements (*.vit) Individual measurements (*.vit) Special point on shoulder Special point on shoulder Triangle tool Triangle tool Point at intersection of arc and line Point at intersection of arc and line Point from X and Y of two other points Point from X and Y of two other points Point intersect line and axis Point intersect line and axis Simple curve Simple curve Curved path Curved path Segmenting a simple curve Segmenting a simple curve Segment a curved path Segment a curved path Point intersect curve and axis Point intersect curve and axis Segment an arc Segment an arc Point intersect arc and axis Point intersect arc and axis Seam allowance tool Seam allowance tool Union tool Union tool toolBar toolBar Last Tool Last Tool Activate last used tool again Activate last used tool again Select point for X value (vertical) Select point for X value (vertical) Mode Mode Pointer Pointer Config pattern piece Config pattern piece Layout Layout Show Curve Details Show Curve Details Show/hide control points and curve direction Show/hide control points and curve direction Tools Tools Point of intersection arcs Point of intersection arcs Point of intersection circles Point of intersection circles Point from circle and tangent Point from circle and tangent Point from arc and tangent Point from arc and tangent Arc with given length Arc with given length Settings Settings Layout pages Layout pages Save as PDF Save as PDF Save original layout Save original layout Save as tiled PDF Save as tiled PDF Split and save a layout into smaller pages Split and save a layout into smaller pages Print Print Print tiled PDF Print tiled PDF Split and print a layout into smaller pages (for regular printers) Split and print a layout into smaller pages (for regular printers) Print preview Print preview Print preview original layout Print preview original layout Export As... Export As... Export original layout Export original layout Select first an arc Select first an arc Select first circle center Select first circle center Select point on tangent Select point on tangent Select point of the center of the arc Select point of the center of the arc Select the first base line point Select the first base line point Detail mode Detail mode You can't use now the Detail mode. Please, create at least one workpiece. You can't use now the Detail mode. Please, create at least one workpiece. Layout mode Layout mode You can't use now the Layout mode. Please, create at least one workpiece. You can't use now the Layout mode. Please, create at least one workpiece. Unsaved changes Unsaved changes Load Individual ... Load Individual ... Load Standard ... Load Standard ... Show ... Show ... Show measurements Show measurements Sync measurements Sync measurements Individual measurements (*.vit);;Standard measurements (*.vst) Individual measurements (*.vit);;Standard measurements (*.vst) Measurements loaded Measurements loaded Standard measurements (*.vst);;Individual measurements (*.vit) Standard measurements (*.vst);;Individual measurements (*.vit) You can't export empty scene. You can't export empty scene. Create new Layout Create new Layout Create/Edit Create/Edit Create/edit measurements Create/edit measurements %1, %2 (%3) Coords in status line: "X, Y (units)" %1, %2 (%3) Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Measurement file contains invalid known measurement(s). Measurement file contains invalid known measurement(s). Measurement file has unknown format. Measurement file has unknown format. Measurement file doesn't include all required measurements. Measurement file doesn't include all required measurements. Please, additionaly provide: %1 Please, additionaly provide: %1 Measurement files types have not match. Measurement files types have not match. Measurements was synced Measurements was synced Couldn't sync measurements. Couldn't sync measurements. Couldn't update measurements. Couldn't update measurements. The measurements file '%1' could not be found. The measurements file '%1' could not be found. The measurements file %1 could not be found. Do you want to update the file location The measurements file %1 could not be found. Do you want to update the file location Loading measurements file Loading measurements file Not supported size value '%1' for this pattern file. Not supported size value '%1' for this pattern file. Couldn't set size. Need a file with standard measurements. Couldn't set size. Need a file with standard measurements. Couldn't set size. File wasn't opened. Couldn't set size. File wasn't opened. The method %1 does nothing in GUI mode The method %1 does nothing in GUI mode Not supported height value '%1' for this pattern file. Not supported height value '%1' for this pattern file. Couldn't set height. Need a file with standard measurements. Couldn't set height. Need a file with standard measurements. Couldn't set height. File wasn't opened. Couldn't set height. File wasn't opened. Export error. Export error. Please, provide one input file. Please, provide one input file. Print an original layout Print an original layout Preview tiled PDF Preview tiled PDF Print preview tiled layout Print preview tiled layout <html><head/><body>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage "Details mode". Before you will be able to enable the "Details mode" need create at least one detail.</body></html> <html><head/><body>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage "Details mode". Before you will be able to enable the "Details mode" need create at least one detail.</body></html> <html><head/><body>Mode for working with details. Before you will be able to enable the "Details mode" need create at least one detail on the stage "Draw mode". Details created on this stage will be used for creating a layout. </body></html> <html><head/><body>Mode for working with details. Before you will be able to enable the "Details mode" need create at least one detail on the stage "Draw mode". Details created on this stage will be used for creating a layout. </body></html> <html><head/><body>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage "Details mode". The layout can be exported to your prefered file format and saved to your harddirve.</body></html> <html><head/><body>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage "Details mode". The layout can be exported to your prefered file format and saved to your harddirve.</body></html> Unload measurements Unload measurements Unload measurements if they was not used in a pattern file. Unload measurements if they was not used in a pattern file. Measurements unloaded Measurements unloaded Couldn't unload measurements. Some of them are used in the pattern. Couldn't unload measurements. Some of them are used in the pattern. True darts True darts New pattern New pattern Open pattern Open pattern Create/Edit measurements Create/Edit measurements Save... Save... Don't Save Don't Save Locking file Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. The lock file could not be created, for lack of permissions. Unknown error happened, for instance a full partition prevented writing out the lock file. Unknown error happened, for instance a full partition prevented writing out the lock file. Report Bug... Report Bug... Point intersection curves Point intersection curves Select first curve Select first curve (read only) (read only) Measurements was changed. Do you want to sync measurements now? Measurements was changed. Do you want to sync measurements now? Curve tool which uses point as control handle Curve tool which uses point as control handle Select first curve point Select first curve point Select point of cubic bezier path Select point of cubic bezier path Toolbar pointer Toolbar pointer Operations Operations Create new group Create new group Groups Groups Select one or more objects, Enter - finish creation Select one or more objects, Enter - finish creation Rotate objects Rotate objects Close pattern Close pattern Select one or more objects, Enter - confirm selection Select one or more objects, Enter - confirm selection Tool pointer Tool pointer Midpoint between two points Midpoint between two points Group Group Contains all visibility groups Contains all visibility groups Show which details will go in layout Show which details will go in layout You can't use now the Layout mode. Please, include at least one detail in layout. You can't use now the Layout mode. Please, include at least one detail in layout. Original zoom Original zoom Select first circle center Select first circle center Select point on tangent Select point on tangent Pattern Piece: Pattern Piece: Height: Height: Size: Size: The measurements file %1 could not be found. Do you want to update the file location? The measurements file %1 could not be found. Do you want to update the file location? Flipping objects by line Flipping objects by line Flipping objects by axis Flipping objects by axis Move objects Move objects Measurements were changed. Do you want to sync measurements now? Measurements were changed. Do you want to sync measurements now? Gradation doesn't support inches Gradation doesn't support inches Measurements have been synced Measurements have been synced Tools for creating elliptical arcs. Tools for creating elliptical arcs. Elliptical Arc Elliptical Arc Select point of center of elliptical arc Select point of center of elliptical arc Select main path objects clockwise. Select main path objects clockwise. The document has no write permissions. The document has no write permissions. Cannot set permissions for %1 to writable. Cannot set permissions for %1 to writable. Could not save the file. Could not save the file. Could not save the file Could not save the file read only read only Variables Table Variables Table Contains information about increments and internal variables Contains information about increments and internal variables Load Individual Load Individual Load Individual measurements file Load Individual measurements file Load Multisize Load Multisize Load multisize measurements file Load multisize measurements file Open Tape Open Tape Edit Current Edit Current Edit linked to the pattern measurements Edit linked to the pattern measurements Sync Sync Synchronize linked to the pattern measurements after change Synchronize linked to the pattern measurements after change Unload Current Unload Current Unload measurements if they were not used in a pattern file Unload measurements if they were not used in a pattern file Individual measurements Individual measurements Multisize measurements Multisize measurements Pattern files Pattern files Pin tool Pin tool Select pin point Select pin point Insert node tool Insert node tool Select an item to insert Select an item to insert Open Tape app for creating or editing measurements file Open Tape app for creating or editing measurements file Export increments to CSV Export increments to CSV Name Name The calculated value The calculated value Formula Formula You can't use Detail mode yet. Please, create at least one workpiece. You can't use Detail mode yet. Please, create at least one workpiece. You can't use Layout mode yet. Please, create at least one workpiece. You can't use Layout mode yet. Please, create at least one workpiece. You can't use Layout mode yet. Please, include at least one detail in layout. You can't use Layout mode yet. Please, include at least one detail in layout. You can't use Layout mode yet. You can't use Layout mode yet. Zoom fit best current zoom fit best current pattern piece Export details skiping the Layout stage You don't have enough details to export. Please, include at least one detail in layout. Export details Can't export details. Label template editor Workpiece tool Internal path tool Save &As… Report Bug… Export As… Save… Final measurements Export Final Measurements to CSV You can't export empty scene. Please, include at least one detail in layout. Export final measurements error. Destination path is empty. Next pattern piece Ctrl+PgDown Previous pattern piece Ctrl+PgUp Place label tool Duplicate detail tool Select placelabel center point The measurements file '%1' could not be found or provides not enough information. Use these tools to create a pattern Scale: Create new pattern piece to start working. Create new pattern piece to start working. Changes applied. Changes applied. Cannot save settings. Access denied. Ctrl+O Cannot read settings from a malformed .INI file. Select path objects, %1 - reverse direction curve Select one or more objects, hold %1 - for multiple selection, %2 - finish creation Select one or more objects, hold %1 - for multiple selection, %2 - confirm selection Point of intersection circle and segment Increase label font Decrease label font Original label font Hide labels Groups of visibility Export recipe Recipe files recipe Could not save recipe. %1 Curved path tool which uses point as control handle Point of intersection arc and axis Show main path Globally show pieces main path Pattern messages Clear all messages Filter DEBUG WARNING CRITICAL FATAL INFO Auto refresh the list with each parse Watermark Load Remove Remove Edit current Editor Create or edit a watermark Watermark files Do you want to change the premissions? Not supported dimension A value '%1' for this pattern file. Couldn't set dimension A. Need a file with multisize measurements. Couldn't set dimension A. File wasn't opened. Not supported dimension B value '%1' for this pattern file. Couldn't set dimension B. Need a file with multisize measurements. Couldn't set dimension B. File wasn't opened. Not supported dimension C value '%1' for this pattern file. Couldn't set dimension C. Need a file with multisize measurements. Couldn't set dimension C. File wasn't opened. MainWindowsNoGUI For saving multypage document all sheet should have the same size. Use export function instead. For saving multypage document all sheet should have the same size. Use export function instead. For previewing multypage document all sheet should have the same size. For previewing multypage document all sheet should have the same size. For printing multypages document all sheet should have the same size. For printing multypages document all sheet should have the same size. Creating file '%1' failed! %2 Creating file '%1' failed! %2 Critical error! Critical error! Print to pdf Print to pdf PDF file (*.pdf) PDF file (*.pdf) Print error Print error Cannot proceed because there are no available printers in your system. Cannot proceed because there are no available printers in your system. unnamed unnamed The layout is stale. The layout is stale. The layout was not updated since last pattern modification. Do you want to continue? The layout was not updated since last pattern modification. Do you want to continue? Couldn't prepare data for creation layout Couldn't prepare data for creation layout Several workpieces left not arranged, but none of them match for paper Several workpieces left not arranged, but none of them match for paper Can't open printer %1 Can't open printer %1 Export error. Export error. For saving multipage document all sheet should have the same size. Use export function instead. For saving multipage document all sheet should have the same size. Use export function instead. For previewing multipage document all sheet should have the same size. For previewing multipage document all sheet should have the same size. For printing multipages document all sheet should have the same size. For printing multipages document all sheet should have the same size. Pages will be cropped because they do not fit printer paper size. Pages will be cropped because they do not fit printer paper size. Can't create path Can't create path Cannot set printer margins Cannot set printer margins Can't create a path Pattern Pattern Name Name Value Value Export final measurements error. Value in line %1 is infinite or NaN. Please, check your calculations. Parser error at line %1: %2. File error %1. One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Description Description Measurement file has unknown format. Measurement file has unknown format. Measurement file contains invalid known measurement(s). Measurement file contains invalid known measurement(s). Wrong units. Wrong units. File error. File error. Measurement file doesn't include all required measurements. Measurement file doesn't include all required measurements. Please, additionally provide: %1 Preparing details for layout Timeout. Cannot set printer page size Cannot set custom printer page size Process has been stoped because of exception. File error. %1 %2 MoveDoubleLabel move the first dart label move the first dart label move the second dart label move the second dart label MoveLabel move point label move point label MoveSPoint move single point move single point MoveSpline move spline move spline MoveSplinePath move spline path move spline path OperationMoveLabel move point label move point label OperationShowLabel toggle label PathPage Open Directory Open Directory Path that use Valentina Path that use Valentina Default Default Edit Edit Type Type Path Path Individual measurements Individual measurements Patterns Patterns Standard measurements Standard measurements Layout Layout Templates Templates PatternPage User User User name User name Graphical output Graphical output Use antialiasing Use antialiasing Undo Undo Count steps (0 - no limit) Count steps (0 - no limit) User name: User name: Count steps (0 - no limit): Count steps (0 - no limit): All user defined materials have been deleted! All user defined materials have been deleted! User defined materials User defined materials Delete all Delete all Workpiece Workpiece Forbid flipping Forbid flipping By default forbid flipping for all workpieces By default forbid flipping for all workpieces By default forbid flipping for all new created workpieces By default forbid flipping for all new created workpieces PreferencesConfigurationPage Save Save Auto-save modified pattern Auto-save modified pattern Interval: Interval: min min Language Language GUI language: GUI language: Decimal separator parts: Decimal separator parts: Default unit: Default unit: Label language: Label language: Pattern making system Pattern making system Pattern making system: Pattern making system: Author: Author: Book: Book: Pattern editing Pattern editing Reset warnings Reset warnings Toolbar Toolbar The text appears under the icon (recommended for beginners). The text appears under the icon (recommended for beginners). With OS options With OS options Centimeters Centimeters Millimiters Millimiters Inches Inches Update a pattern only after a curve release Free curve mode default unit General General Double click calls Zoom fit best for current pattern piece Scrolling Animation Duration: Scrolling animation duration ms milliseconds Update interval: Time in milliseconds between each animation update Mouse scale Sensor: sensor mouse Scale scrolling sensitivity for mouse with sensor Wheel: mouse wheel Scale scrolling sensitivity for mouse with wheel Acceleration: User Interface Activate dark mode dark mode Change the position of the tool panel to optimize for big screen resolutions. By default, the tool panel will take all available space. Tool panel scaling PreferencesPathPage Paths that Valentina uses Paths that Valentina uses Type Type Path Path Default Default Edit Edit Open Directory Open Directory My Individual Measurements My Individual Measurements My Multisize Measurements My Multisize Measurements My Patterns My Patterns My Layouts My Layouts My Templates My Templates My label templates PreferencesPatternPage Graphical output Graphical output Use antialiasing Use antialiasing Undo Undo Count steps (0 - no limit): Count steps (0 - no limit): Workpiece Workpiece Forbid flipping Forbid flipping Show a passmark both in the seam allowance and on the seam line. Show a passmark both in the seam allowance and on the seam line. Show second passmark on seam line Show second passmark on seam line By default forbid flipping for all new created workpieces By default forbid flipping for all new created workpieces By default hide the main path if the seam allowance was enabled By default hide the main path if the seam allowance was enabled Hide main path Hide main path Label font: Seam allowance Seam allowance Default value: Label data/time format Date: Edit formats Time: Materials Known materials: Manage list of known materials Manage When manage pattern materials save them to known materials list Remeber pattern materials Curve approximation: Set default curve approximation scale Bold line width Line width: Millimiters Millimiters Inches Inches Use OpenGL to render a scene. This option will take an affect after restart. Use OpenGL render antialiasing scene render QApplication The path to the measurments is already relative. The path to the measurments is already relative. The path to the measurments is already absolute. The path to the measurments is already absolute. QCommandLineParser Displays version information. Displays version information. Displays this help. Displays this help. Unknown option '%1'. Unknown option '%1'. Unknown options: %1. Unknown options: %1. Missing value after '%1'. Missing value after '%1'. Unexpected value after '%1'. Unexpected value after '%1'. [options] [options] Usage: %1 Usage: %1 Options: Options: Arguments: Arguments: QCoreApplication Based on Qt %1 (%2, %3 bit) Based on Qt %1 (%2, %3 bit) VLayoutPassmark prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VLayoutPassmark compatibility error: actualClassVersion = %1 and classVersion = %2 VLayoutPlaceLabel prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VLayoutPlaceLabel compatibility error: actualClassVersion = %1 and classVersion = %2 VAbstractPieceData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VAbstractPieceData compatibility error: actualClassVersion = %1 and classVersion = %2 VRawLayoutData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VRawLayoutData compatibility error: actualClassVersion = %1 and classVersion = %2 VLayoutPiecePathData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VLayoutPiecePathData compatibility error: actualClassVersion = %1 and classVersion = %2 TextLine prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 TextLine compatibility error: actualClassVersion = %1 and classVersion = %2 VTextManager prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VTextManager compatibility error: actualClassVersion = %1 and classVersion = %2 CustomSARecord prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 CustomSARecord compatibility error: actualClassVersion = %1 and classVersion = %2 VPieceNodeData prefix mismatch error: actualStreamHeader = 0x%1 and streamHeader = 0x%2 VPieceNodeData compatibility error: actualClassVersion = %1 and classVersion = %2 QObject Create new pattern piece to start working. Create new pattern piece to start working. mm mm cm cm inch inch Property The text that appears in the first column header Property Value The text that appears in the second column header Value px px add node add node move detail move detail Changes applied. Changes applied. Wrong tag name '%1'. Wrong tag name '%1'. Can't convert toUInt parameter Can't convert toUInt parameter Can't convert toBool parameter Can't convert toBool parameter Got empty parameter Got empty parameter Can't convert toDouble parameter Can't convert toDouble parameter Got wrong parameter id. Need only id > 0. Got wrong parameter id. Need only id > 0. United detail United detail Fabric Fabric Lining Lining Interfacing Interfacing Interlining Interlining Cut Cut on fold on fold Visibility trigger contains error and will be ignored User material number %1 was not defined in this pattern. Error in internal path '%1'. There is no intersection of first point with cutting countour Error in internal path '%1'. There is no intersection of last point with cutting countour Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. Cannot get tokens from formula '%1'. Parser error: %2. Error Error Empty formula Invalid result. Value is infinite or NaN. Please, check your calculations. Invalid result. Value is infinite or NaN. Please, check your calculations. Value can't be 0 Value can't be 0 Value can't be less than 0 Value can't be less than 0 Parser error: %1 Parser error: %1 Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. Piece '%1'. Seam allowance is not valid. Found null notch for point '%1' in piece '%2'. Length is less than minimal allowed. Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. Cannot calculate seam allowance before for point '%1'. Reason: %2. Cannot calculate seam allowance after for point '%1'. Reason: %2. Cannot calculate seam allowance after for point '%1'. Reason: Cannot calculate passmark length for point '%1'. Reason: %2. Passmark '%1' is not part of piece '%2'. Cannot cast tool with id '%1'. Empty list of nodes for tool with id '%1'. Invalid formula '%1' for tool with id '%2'. %3. Can't convert toInt parameter Could not find the segment start. Could not find the segment end. Segment is too short. Error calculating segment for curve '%1'. %2 Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. Piece name '%1' is not unique. Error in path '%1'. Calculating segment for curve '%2' has failed. %3 QSaveFile Existing file %1 is not writable Existing file %1 is not writable Writing canceled by application Writing canceled by application Partial write. Partition full? Partial write. Partition full? QmuParser too few arguments for function sum. parser error message too few arguments for function sum. too few arguments for function min. parser error message too few arguments for function min. QmuParserErrorMsg Unexpected token "$TOK$" found at position $POS$. Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected token "$TOK$" found at position $POS$. Internal error Math parser error messages. Internal error Invalid function-, variable- or constant name: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid function-, variable- or constant name: "$TOK$". Invalid binary operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid binary operator identifier: "$TOK$". Invalid infix operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid infix operator identifier: "$TOK$". Invalid postfix operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid postfix operator identifier: "$TOK$". Invalid pointer to callback function. Math parser error messages. Invalid pointer to callback function. Expression is empty. Math parser error messages. Expression is empty. Invalid pointer to variable. Math parser error messages. Invalid pointer to variable. Unexpected operator "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected operator "$TOK$" found at position $POS$ Unexpected end of expression at position $POS$ Math parser error messages. Left untouched $POS$ Unexpected end of expression at position $POS$ Unexpected argument separator at position $POS$ Math parser error messages. Left untouched $POS$ Unexpected argument separator at position $POS$ Unexpected parenthesis "$TOK$" at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected parenthesis "$TOK$" at position $POS$ Unexpected function "$TOK$" at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected function "$TOK$" at position $POS$ Unexpected value "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected value "$TOK$" found at position $POS$ Unexpected variable "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected variable "$TOK$" found at position $POS$ Function arguments used without a function (position: $POS$) Math parser error messages. Left untouched $POS$ Function arguments used without a function (position: $POS$) Missing parenthesis Math parser error messages. Missing parenthesis Too many parameters for function "$TOK$" at expression position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Too many parameters for function "$TOK$" at expression position $POS$ Too few parameters for function "$TOK$" at expression position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Too few parameters for function "$TOK$" at expression position $POS$ Divide by zero Math parser error messages. Divide by zero Domain error Math parser error messages. Domain error Name conflict Math parser error messages. Name conflict Invalid value for operator priority (must be greater or equal to zero). Math parser error messages. Invalid value for operator priority (must be greater or equal to zero). user defined binary operator "$TOK$" conflicts with a built in operator. Math parser error messages. Left untouched "$TOK$" user defined binary operator "$TOK$" conflicts with a built in operator. Unexpected string token found at position $POS$. Math parser error messages. Left untouched $POS$ Unexpected string token found at position $POS$. Unterminated string starting at position $POS$. Math parser error messages. Left untouched $POS$ Unterminated string starting at position $POS$. String function called with a non string type of argument. Math parser error messages. String function called with a non string type of argument. String value used where a numerical argument is expected. Math parser error messages. String value used where a numerical argument is expected. No suitable overload for operator "$TOK$" at position $POS$. Math parser error messages. Left untouched "$TOK$" and $POS$ No suitable overload for operator "$TOK$" at position $POS$. Function result is a string. Math parser error messages. Function result is a string. Parser error. Math parser error messages. Parser error. Decimal separator is identic to function argument separator. Math parser error messages. Decimal separator is identic to function argument separator. The "$TOK$" operator must be preceeded by a closing bracket. Math parser error messages. Left untouched "$TOK$" The "$TOK$" operator must be preceeded by a closing bracket. If-then-else operator is missing an else clause Math parser error messages. Do not translate operator name. If-then-else operator is missing an else clause Misplaced colon at position $POS$ Math parser error messages. Left untouched $POS$ Misplaced colon at position $POS$ RemoveItemFromGroup Remove item from group RenameGroup rename group RenamePP rename pattern piece rename pattern piece RotationMoveLabel move point label move point label SaveDetailOptions save detail option save detail option SavePieceOptions save detail options SavePiecePathOptions save path options save path options SavePlaceLabelOptions save place label options SaveToolOptions save tool option save tool option ShowDoubleLabel toggle the first dart label togggle the second dart label ShowLabel toggle label TMainWindow <html><head/><body>Select New for creation measurement file.</body></html> <html><head/><body>Select New for creation measurement file.</body></html> Name Name Calculated value Calculated value Formula Formula Base value Base value In sizes In sizes In heights In heights Details Details Name: Name: Formula: Formula: <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Base value: Base value: In sizes: In sizes: In heights: In heights: Description: Description: Move measurement up Move measurement up Move measurement down Move measurement down Calculated value: Calculated value: Full name: Full name: Information Information Type: Type: Measurement type Measurement type Path: Path: Path to file Path to file Show in Explorer Show in Explorer Base size: Base size: Base size value Base size value Base height: Base height: Base height value Base height value Given name: Given name: Family name: Family name: Birth date: Birth date: yyyy-MM-dd yyyy-MM-dd Email: Email: Notes: Notes: File File Window Window Help Help Measurements Measurements Menu Menu Gradation Gradation Open individual ... Open individual ... Save Save Save As ... Save As ... Quit Quit About &Qt About &Qt About Tape About Tape New New Add known Add known Add custom Add custom Read only Read only Open standard ... Open standard ... Open template Open template Database Database Show information about all known measurement Show information about all known measurement Preferences Preferences untitled %1 untitled %1 This file already opened in another window. This file already opened in another window. File error. File error. Could not save file Could not save file measurements measurements Individual measurements (*.vit) Individual measurements (*.vit) Standard measurements (*.vst) Standard measurements (*.vst) Save as Save as &New Window &New Window Edit measurement Edit measurement M_%1 M_%1 Error Error Empty field. Empty field. Parser error: %1 Parser error: %1 Standard measurements Standard measurements Height: Height: Size: Size: Individual measurements Individual measurements untitled untitled <Empty> <Empty> Unsaved changes Unsaved changes Measurements have been modified. Do you want to save your changes? Measurements have been modified. Do you want to save your changes? Empty field Empty field Value Value Open file Open file Import from a pattern Import from a pattern Pattern files (*.val) Pattern files (*.val) Pattern unit: Pattern unit: Find: Find: Find Previous Find Previous Ctrl+Shift+G Ctrl+Shift+G Find Next Find Next Ctrl+G Ctrl+G Individual measurements (*.vit);;Standard measurements (*.vst);;All files (*.*) Individual measurements (*.vit);;Standard measurements (*.vst);;All files (*.*) Standard measurements (*.vst);;Individual measurements (*.vit);;All files (*.*) Standard measurements (*.vst);;Individual measurements (*.vit);;All files (*.*) Measurements (*.vst *.vit);;All files (*.*) Measurements (*.vst *.vit);;All files (*.*) Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. File contains invalid known measurement(s). File contains invalid known measurement(s). File has unknown format. File has unknown format. Full name Full name File '%1' doesn't exist! File '%1' doesn't exist! The name of known measurement forbidden to change. The name of known measurement forbidden to change. Can't find measurement '%1'. Can't find measurement '%1'. The base value of known measurement forbidden to change. The base value of known measurement forbidden to change. The size increase value of known measurement forbidden to change. The size increase value of known measurement forbidden to change. The height increase value of known measurement forbidden to change. The height increase value of known measurement forbidden to change. The full name of known measurement forbidden to change. The full name of known measurement forbidden to change. Name in formula Name in formula Function Wizard Function Wizard Move measurement top Move measurement top Move measurement bottom Move measurement bottom Delete measurement Delete measurement unknown gender unknown male gender male female gender female Gender: Gender: PM system: PM system: Create from existing ... Create from existing ... Create from existing file Create from existing file Select file Select file Export standard measurements not supported. Export standard measurements not supported. Measurement diagram Measurement diagram <html><head/><body>?Unknown measurement</body></html> <html><head/><body>?Unknown measurement</body></html> <html><head/><body>?Unknown measurement</body></html> <html><head/><body>?Unknown measurement</body></html> About Qt About Qt File was not saved yet. File was not saved yet. Search Search Measurement's name in a formula Measurement's name in a formula Measurement's name in a formula. Measurement's name in a formula. Measurement's human-readable name. Measurement's human-readable name. Customer's name. Customer's name. Customer's family name. Customer's family name. Customer's email address. Customer's email address. Save... Save... Don't Save Don't Save Locking file Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. The lock file could not be created, for lack of permissions. Unknown error happened, for instance a full partition prevented writing out the lock file. Unknown error happened, for instance a full partition prevented writing out the lock file. Export to CSV Export to CSV Comma-Separated Values (*.cvs) Comma-Separated Values (*.cvs) Invalid value Invalid value Show in Finder Show in Finder Comma-Separated Values Comma-Separated Values Customer's name Customer's name Customer's family name Customer's family name Customer's email address Customer's email address Height: Height: Size: Size: All files All files The measurements document has no write permissions. The measurements document has no write permissions. Cannot set permissions for %1 to writable. Cannot set permissions for %1 to writable. Could not save the file. Could not save the file. Could not save the file Could not save the file read only read only Multisize measurements Multisize measurements Invalid result. Value is infinite or NaN. Please, check your calculations. Invalid result. Value is infinite or NaN. Please, check your calculations. Empty Empty Export from multisize measurements is not supported. Customer name: Customer name: Open multisize … Create from existing … Save… Import from CSV Measurement name in is empty. Merasurement '%1' doesn't match regex pattern. Merasurement '%1' already used in file. Measurement '%1' is not one of known measurements. Individual measurements require at least 2 columns. Error in row %1. Multisize measurements require at least 4 columns. Imported file must not contain the same name twice. Error in row %1. Measurement name is empty. Cannot save settings. Access denied. &File &File &Window &Help &Help &Measurements &Open individual … &Save &Save Save &As … &Quit &About Tape &New &New <html><head/><body>Search measurements by term. Prepend "/r/" to the front of the search string to search measurements by regex.</body></html> Do you want to change the premissions? Cannot read settings from a malformed .INI file. Correction Units: Units: Shift B Shift C Correction: Dimension: Select one of the dimensions to later use the measurement value in piece label Base Values: Export to individual Export to individual measurements Use full circumference Restrict second dimension Restrict third dimension Dimension labels The table doesn't provide dimensions Invalid base value for dimension A The table doesn't support dimension B Invalid base value for dimension B The table doesn't support dimension C Invalid base value for dimension C measurements.vit Shift (%1): %1 shift Cannot convert base value to double in column 2. Cannot convert shift value to double in column %1. Millimeters Inches Inches Centimeters Centimeters Degrees TabGrainline Grainline visible Grainline visible Rotation: Rotation: Formula wizard Formula wizard Value Value Calculation Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Length: Length: Center pin: Center pin: Top pin: Top pin: Bottom pin: Bottom pin: Arrows: Arrows: TabLabels Piece label data Piece label data Letter: Letter: Letter of pattern piece Letter of pattern piece Placement: Placement: Labels Labels Detail label visible Detail label visible Width: Width: Formula wizard Formula wizard Value Value Calculation Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Height: Height: Center pin: Center pin: Top left pin: Top left pin: Bottom right pin: Bottom right pin: Angle: Angle: Pattern label visible Pattern label visible Label template: Edit template Label data Quantity: on fold on fold Annotation: A text field to add comments in Orientation: Rotation: Rotation: Tilt: Fold position: Edit piece label template Options to control position a detail label. Not available if a detail label template is empty. Options to control position a pattern label. Not available if a pattern label template is empty. TabPassmarks Passmark: Passmark: One line One line Two lines Two lines Three lines Three lines T mark T mark V mark V mark Angle Angle Straightforward Straightforward Bisector Bisector Marks Marks Select if need designate the corner point as a passmark Select if need designate the corner point as a passmark Intersection Intersection Show the second passmark on seam line Show the second passmark on seam line This option has effect only if the second passmark on seam line enabled in global preferences. The option helps disable the second passmark for this passmark only. This option has effect only if the second passmark on seam line enabled in global preferences. The option helps disable the second passmark for this passmark only. Select if need designate the corner point as a passmark. Show only left passmark. Intersection (only left) Select if need designate the corner point as a passmark. Show only right passmark. Intersection (only right) Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Acute angle that looks intside of piece Acute angle that looks outside of piece V mark 2 Manual length Length: Length: Formula wizard Formula wizard Value Value Calculation Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> U mark Box mark List of all defined passmarks. To define a passmark return to the Main Path tab, call context menu for a point item and make it a passmark. TabPaths Main path Main path All objects in path should follow in clockwise direction. All objects in path should follow in clockwise direction. Forbid piece be mirrored in a layout. Forbid piece be mirrored in a layout. Forbid flipping Forbid flipping Ready! Ready! Seam allowance Seam allowance Width: Width: Formula wizard Formula wizard Value Value Calculation Calculation <html><head/><body>Show full calculation in message box</body></html> <html><head/><body>Show full calculation in message box</body></html> Nodes Nodes Node: Node: Before: Before: Return to default width Return to default width Default Default After: After: Angle: Angle: Start point: Start point: End point: End point: Include as: Include as: Internal paths Internal paths The seam allowance is part of main path The seam allowance is part of main path Built in Built in Hide the main path if the seam allowance is enabled Hide the main path if the seam allowance is enabled Hide main path Hide main path Name of detail: Name of detail: Detail Detail Name can't be empty Name can't be empty Force piece to be always flipped in a layout. Force flipping Move on top Move up Move down Move on bottom Priority: Controls priority in layout. 0 - no priority. Automatic seam allowance Automatic Custom seam allowance Custom TabPlaceLabels Dialog Dialog Tape This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. TapeConfigDialog Apply Apply &Cancel &Cancel &Ok &Ok Config Dialog Config Dialog Configuration Configuration Paths Paths TapeConfigurationPage Language Language GUI language GUI language Pattern making system Pattern making system Author: Author: Book: Book: Decimal separator parts Decimal separator parts With OS options (%1) With OS options (%1) GUI language: GUI language: Decimal separator parts: Decimal separator parts: Pattern making system: Pattern making system: Default height and size Default height and size Default height: Default height: Default size: Default size: TapePathPage Open Directory Open Directory Path that use Valentina Path that use Valentina Default Default Edit Edit Type Type Path Path Individual measurements Individual measurements Standard measurements Standard measurements Templates Templates TapePreferencesConfigurationPage Language Language GUI language: GUI language: Decimal separator parts: Decimal separator parts: Pattern making system Pattern making system Pattern making system: Pattern making system: Author: Author: Book: Book: Measurements editing Measurements editing Reset warnings Reset warnings Toolbar Toolbar The text appears under the icon (recommended for beginners). The text appears under the icon (recommended for beginners). Default height and size Default height and size Default height: Default height: Default size: Default size: With OS options With OS options User Interface Activate dark mode dark mode TapePreferencesPathPage Paths that Valentina uses Paths that Valentina uses Type Type Path Path Default Default Edit Edit Open Directory Open Directory My Individual Measurements My Individual Measurements My Multisize Measurements My Multisize Measurements My Templates My Templates My Patterns My Patterns ToggleDetailInLayout detail in layout list detail in layout list TogglePieceForceForbidFlipping piece flipping TogglePieceInLayout detail in layout list detail in layout list Utils::CheckableMessageBox Do not ask again Do not ask again Do not &ask again Do not &ask again Do not &show again Do not &show again VAbstartMeasurementDimension Invalid min/max range Invalid step Base value invalid Height Height Size Size Hip Waist Chest full circumference Chest half circumference Chest circumference Hip full circumference Hip half circumference Waist full circumference Waist half circumference VAbstractConverter Couldn't get version information. Couldn't get version information. Too many tags <%1> in file. Too many tags <%1> in file. Version "%1" invalid. Version "%1" invalid. Version "0.0.0" invalid. Version "0.0.0" invalid. Invalid version. Minimum supported version is %1 Invalid version. Minimum supported version is %1 Invalid version. Maximum supported version is %1 Invalid version. Maximum supported version is %1 Error no unique id. Error no unique id. Could not change version. Could not change version. Error creating a backup file: %1. Error creating a backup file: %1. Error creating a reserv copy: %1. Error creating a reserv copy: %1. Unexpected version "%1". Unexpected version "%1". Error replacing a symlink by real file: %1. Error replacing a symlink by real file: %1. Error openning a temp file: %1. Error openning a temp file: %1. Invalid version. Minimum supported format version is %1 Invalid version. Maximum supported format version is %1 Can't open file %1: %2. Can't open file %1: %2. Can't open schema file %1: %2. Can't open schema file %1: %2. Could not load schema file '%1'. Could not load schema file '%1'. Validation error file %3 in line %1 column %2 Validation error file %3 in line %1 column %2 VAbstractCubicBezierPath Can't cut this spline Can't cut this spline VAbstractLayoutDialog Letter Paper format Letter Legal Paper format Legal Tabloid Paper format Roll 24in Paper format Roll 24in Roll 30in Paper format Roll 30in Roll 36in Paper format Roll 36in Roll 42in Paper format Roll 42in Roll 44in Paper format Roll 44in Roll 48in Paper format Roll 44in {48i?} Roll 62in Paper format Roll 44in {62i?} Roll 72in Paper format Roll 44in {72i?} Custom Paper format Custom VAbstractNode This id (%1) is not unique. VAbstractOperation Label Length Length operation options delete operation Visibility group VAbstractPattern Can't find tool in table. Can't find tool in table. Error creating or updating group Error creating or updating group New group New group measurement VAbstractPiece Piece '%1'. Not enough points to build seam allowance. VAbstractPieceData Detail Detail VAbstractSpline Length Length Label VAbstractTool black black green green blue blue dark red dark red dark green dark green dark blue dark blue yellow yellow Confirm deletion Confirm deletion Do you really want to delete? Do you really want to delete? light salmon light salmon golden rod golden rod orange orange deep pink deep pink violet violet dark violet dark violet medium sea green medium sea green lime lime deep sky blue deep sky blue corn flower blue corn flower blue Edit wrong formula Edit wrong formula goldenrod goldenrod VApplication Error parsing file. Program will be terminated. Error parsing file. Program will be terminated. Error bad id. Program will be terminated. Error bad id. Program will be terminated. Error can't convert value. Program will be terminated. Error can't convert value. Program will be terminated. Error empty parameter. Program will be terminated. Error empty parameter. Program will be terminated. Error wrong id. Program will be terminated. Error wrong id. Program will be terminated. Something's wrong!! Something's wrong!! Parser error: %1. Program will be terminated. Parser error: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. Invalid notch. VBank Preparing data for layout error: Detail '%1' square <= 0 Preparing data for layout error: Layout paper sheet <= 0 Preparing data for layout error: List of details is empty VCommandLine Path to custom measure file (export mode). Path to custom measure file (export mode). The measure file The measure file Number corresponding to output format (default = 0, export mode): Number corresponding to output format (default = 0, export mode): Format number Format number Number corresponding to page template (default = 0, export mode): Number corresponding to page template (default = 0, export mode): Template number Template number The page width The page width The measure unit The measure unit Rotation in degrees (one of predefined). Default (or 0) is no-rotate (export mode). Rotation in degrees (one of predefined). Default (or 0) is no-rotate (export mode). Angle Angle Auto crop unused length (export mode). Auto crop unused length (export mode). Unite pages if possible (export mode). Unite pages if possible (export mode). Save length of the sheet if set. (export mode). Save length of the sheet if set. (export mode). Layout units (as paper's one except px, export mode). Layout units (as paper's one except px, export mode). The unit The unit Shift layout length measured in layout units (export mode). Shift layout length measured in layout units (export mode). Shift length Shift length Gap width x2, measured in layout units. (export mode). Gap width x2, measured in layout units. (export mode). The gap width The gap width Sets layout groupping (export mode): Sets layout groupping (export mode): Grouping type Grouping type Cannot use pageformat and page explicit size/units together. Cannot use pageformat and page explicit size/units together. Page height, width, units must be used all 3 at once. Page height, width, units must be used all 3 at once. Invalid rotation value. That must be one of predefined values. Invalid rotation value. That must be one of predefined values. Unknown page templated selected. Unknown page templated selected. Unsupported paper units. Unsupported paper units. Unsupported layout units. Unsupported layout units. Export options can be used with single input file only. Export options can be used with single input file only. Run the program in a test mode. The program this mode load a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Run the program in a test mode. The program this mode load a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Test option can be used with single input file only. Test option can be used with single input file only. The base filename of exported layout files. Use it to enable console export mode. The base filename of exported layout files. Use it to enable console export mode. The base filename of layout files The base filename of layout files The path to output destination folder. The path to output destination folder. The destination folder The destination folder Set size value a pattern file, that was opened with standard measurements (export mode). Valid values: %1cm. Set size value a pattern file, that was opened with standard measurements (export mode). Valid values: %1cm. The size value The size value Set height value a pattern file, that was opened with standard measurements (export mode). Valid values: %1cm. Set height value a pattern file, that was opened with standard measurements (export mode). Valid values: %1cm. The height value The height value Page width in current units like 12.0 (cannot be used with "%1", export mode). Page width in current units like 12.0 (cannot be used with "%1", export mode). Page height in current units like 12.0 (cannot be used with "%1", export mode). Page height in current units like 12.0 (cannot be used with "%1", export mode). Page height/width measure units (cannot be used with "%1", export mode): Page height/width measure units (cannot be used with "%1", export mode): Invalid gradation size value. Invalid gradation size value. Invalid gradation height value. Invalid gradation height value. Pattern making program. Pattern making program. Pattern file. Pattern file. Ignore margins printing (export mode). Set all margins to 0. Ignore margins printing (export mode). Set all margins to 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Shift length must be used together with shift units. Shift length must be used together with shift units. Gap width must be used together with shift units. Gap width must be used together with shift units. Left margin must be used together with page units. Left margin must be used together with page units. Right margin must be used together with page units. Right margin must be used together with page units. Top margin must be used together with page units. Top margin must be used together with page units. Bottom margin must be used together with page units. Bottom margin must be used together with page units. The path to output destination folder. By default the directory at which the application was started. The path to output destination folder. By default the directory at which the application was started. Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Shift layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. Shift layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. Sets layout groupping cases (export mode): %1. Sets layout groupping cases (export mode): %1. Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Shift/Offset layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. Shift/Offset layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. Shift/Offset length Shift/Offset length Shift/Offset length must be used together with shift units. Shift/Offset length must be used together with shift units. Number corresponding to output format (default = 0, export mode): Number corresponding to output format (default = 0, export mode): Number corresponding to page template (default = 0, export mode): Number corresponding to page template (default = 0, export mode): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Export dxf in binary form. Export text as paths. Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Export only details that match a piece name regex. The name regex Export to csv with header. By default disabled. Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Codec name Specify csv separator character. Default value is '%1'. Valid characters: Separator character Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Path to csv file Number corresponding to layout page template (default = 0, export mode): Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. The left margin Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. The right margin Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. The top margin Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. The bottom margin Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Cannot use pageformat and page explicit size together. Tiled left margin must be used together with page units. Tiled right margin must be used together with page units. Tiled top margin must be used together with page units. Tiled bottom margin must be used together with page units. Page measure units (export mode). Valid values: %1. Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. User material Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. Invalid user material '%1'. Separator is missing. Invalid user material '%1'. Wrong material number. Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. The page height Order detail to follow grainline direction (export mode). <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. Time Coefficient Time must be in range from 1 minute to 60 minutes. Follow manual priority over priority by square (export mode). Nest quantity copies of each piece (export mode). Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. Coefficient must be in range from 0 to 100. Auto crop unused width (export mode). Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). Horizontal scale Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). Vertical scale Prefer one sheet layout solution (export mode). Invalid dimension A value. Invalid dimension B value. Invalid dimension C value. Set base for dimension A in the multisize measurements units (export mode). The dimension A base Set base for dimension B in the multisize measurements units (export mode). The dimension B base Set base for dimension C in the multisize measurements units (export mode). The dimension C base VCommonSettings measurements measurements individual individual multisize multisize templates templates label templates patterns patterns VContainer Can't find object Can't find object Can't cast object Can't cast object Can't find object. Type mismatch. Can't find object. Type mismatch. Number of free id exhausted. Number of free id exhausted. Can't create a curve with type '%1' Can't create a curve with type '%1' Can't cast object. VCubicBezierPath Not enough points to create the spline. Not enough points to create the spline. This spline does not exist. This spline does not exist. VDomDocument Can't convert toUInt parameter Can't convert toUInt parameter Can't convert toBool parameter Can't convert toBool parameter Got empty parameter Got empty parameter Can't convert toDouble parameter Can't convert toDouble parameter Can't open file %1: %2. Can't open file %1: %2. Can't open schema file %1: %2. Can't open schema file %1: %2. Could not load schema file. Could not load schema file. Validation error file %3 in line %1 column %2 Validation error file %3 in line %1 column %2 Parsing error file %3 in line %1 column %2 Parsing error file %3 in line %1 column %2 Couldn't get node Couldn't get node Got wrong parameter id. Need only id > 0. Got wrong parameter id. Need only id > 0. This id is not unique. This id is not unique. Could not copy temp file to document file Could not copy temp file to document file Could not remove document file Could not remove document file Could not load schema file '%1'. Could not load schema file '%1'. Fail to write Canonical XML. Fail to write Canonical XML. <empty> Not unique id (%1) This id (%1) is not unique. Couldn't get version information. Couldn't get version information. Too many tags <%1> in file. Too many tags <%1> in file. Version "%1" invalid. Version "%1" invalid. Version "0.0.0" invalid. Version "0.0.0" invalid. VDrawTool Edit wrong formula Edit wrong formula Options Options Delete Delete This id (%1) is not unique. Add to group Remove from group Show label VException Exception: %1 Exception: %1 VFormula Error Error Data container is empty Math parser error: %1 Result is infinite Result is NaN Result is zero Result less than zero Formula is empty Not evaluated VFormulaData Not evaluated Error Error Formula is empty VFormulaProperty Value Value Formula Formula VLayoutPiece Piece %1 doesn't have shape. Piece %1 doesn't have shape. VMeasurements Can't find measurement '%1' Can't find measurement '%1' The measurement name is empty! The measurement name is empty! None None Height Height Size Size Hip Waist VNodePoint Options Options In layout In layout Show label Exclude Delete Delete Forbid flipping Forbid flipping Force flipping by length by length by points intersetions by points intersetions by first edge symmetry by first edge symmetry by second edge symmetry by second edge symmetry by first edge right angle by first edge right angle by second edge right angle by second edge right angle Passmark Passmark Seam allowance angle Passmark angle Straightforward Straightforward Bisector Bisector Intersection Intersection Intersection (only left) Intersection (only right) Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Passmark mark One line One line Two lines Two lines Three lines Three lines T mark T mark V mark V mark V mark 2 U mark Box mark VPE::VBoolProperty True True False False VPE::VFileEditWidget Directory Directory Open File Open File VPattern Error no unique id. Error no unique id. Error parsing file. Error parsing file. Error can't convert value. Error can't convert value. Error empty parameter. Error empty parameter. Error wrong id. Error wrong id. Error parsing file (std::bad_alloc). Error parsing file (std::bad_alloc). Error creating or updating detail Error creating or updating detail Error creating or updating single point Error creating or updating single point Error creating or updating point of end line Error creating or updating point of end line Error creating or updating point along line Error creating or updating point along line Error creating or updating point of shoulder Error creating or updating point of shoulder Error creating or updating point of normal Error creating or updating point of normal Error creating or updating point of bisector Error creating or updating point of bisector Error creating or updating point of lineintersection Error creating or updating point of lineintersection Error creating or updating point of contact Error creating or updating point of contact Error creating or updating modeling point Error creating or updating modeling point Error creating or updating height Error creating or updating height Error creating or updating triangle Error creating or updating triangle Error creating or updating point of intersection Error creating or updating point of intersection Error creating or updating cut spline point Error creating or updating cut spline point Error creating or updating cut spline path point Error creating or updating cut spline path point Error creating or updating cut arc point Error creating or updating cut arc point Error creating or updating point of intersection line and axis Error creating or updating point of intersection line and axis Error creating or updating point of intersection curve and axis Error creating or updating point of intersection curve and axis Error creating or updating line Error creating or updating line Error creating or updating simple curve Error creating or updating simple curve Error creating or updating curve path Error creating or updating curve path Error creating or updating modeling simple curve Error creating or updating modeling simple curve Error creating or updating modeling curve path Error creating or updating modeling curve path Error creating or updating simple arc Error creating or updating simple arc Error creating or updating modeling arc Error creating or updating modeling arc Error creating or updating union details Error creating or updating union details Error creating or updating point of intersection arcs Error creating or updating point of intersection arcs Error creating or updating point of intersection circles Error creating or updating point of intersection circles Error creating or updating point from circle and tangent Error creating or updating point from circle and tangent Error creating or updating point from arc and tangent Error creating or updating point from arc and tangent Error creating or updating true darts Error creating or updating true darts Wrong tag name '%1'. Wrong tag name '%1'. Unknown point type '%1'. Unknown point type '%1'. Unknown spline type '%1'. Unknown spline type '%1'. Unknown arc type '%1'. Unknown arc type '%1'. Unknown tools type '%1'. Unknown tools type '%1'. Error not unique id. Error not unique id. Error creating or updating point of intersection curves Error creating or updating point of intersection curves Error creating or updating simple interactive spline Error creating or updating simple interactive spline Error creating or updating interactive spline path Error creating or updating interactive spline path Error creating or updating cubic bezier curve Error creating or updating cubic bezier curve Error creating or updating cubic bezier path curve Error creating or updating cubic bezier path curve Error creating or updating operation of rotation Error creating or updating operation of rotation Unknown operation type '%1'. Unknown operation type '%1'. Error creating or updating operation of flipping by line Error creating or updating operation of flipping by line Error creating or updating operation of flipping by axis Error creating or updating operation of flipping by axis Error creating or updating operation of moving Error creating or updating operation of moving Error creating or updating point of line intersection Error creating or updating point of line intersection Error creating or updating simple elliptical arc Error creating or updating simple elliptical arc Unknown elliptical arc type '%1'. Unknown elliptical arc type '%1'. Error creating or updating modeling elliptical arc Error creating or updating modeling elliptical arc Detail Detail Unnamed path Unnamed path Error creating or updating a piece path Error creating or updating a piece path Error creating or updating pin point Error creating or updating pin point Error creating or updating place lavel Piece path doesn't contain nodes VPatternConverter Unexpected version "%1". Unexpected version "%1". Error restoring backup file: %1. Error restoring backup file: %1. VPatternRecipe Invalid tag %1 Can't find element by id '%1' Can't create history record for the tool. Reading final measurements error. Value for final measurtement '%1' is infinite or NaN. Please, check your calculations. VPiece Cannot calculate a notch for point '%1' in piece '%2'. Notch for point '%1' in piece '%2' will be disabled. Manual length is less than allowed value. Main path of piece %1 VPoster Grid ( %1 , %2 ) Grid ( %1 , %2 ) Page %1 of %2 Page %1 of %2 Sheet %1 of %2 Sheet %1 of %2 Not supported file suffix '%1' cm unit cm in unit in Cannot open the watermark image. VSettings layouts layouts VSplinePath Not enough points to create the spline. Not enough points to create the spline. This spline does not exist. This spline does not exist. Can't cut spline path with one point Can't cut spline path with one point VTextManager Cut %1 on %2%3 Cut %1 on %2%3 on Fold on Fold on Fold on Fold Cut Cut cut cut on fold on fold VToolAlongLine Length Length Angle Angle Label VToolArc Length Length Radius Radius Start angle End angle Label VToolArcWithLength Length Length Radius Radius Start angle End angle Label VToolBasePoint Label VToolCurveIntersectAxis Error calculating point '%1'. There is no intersection with curve '%2' and axis through point '%3' with angle %4° VToolCutArc Arc Arc length start angle end angle radius label VToolCutSpline Curve Curve length label VToolCutSplinePath Curve Curve length label VToolDetail Options Options Delete Delete move pattern piece label move pattern piece label resize pattern piece label resize pattern piece label rotate pattern piece label rotate pattern piece label move pattern info label move pattern info label resize pattern info label resize pattern info label rotate pattern info label rotate pattern info label In layout In layout move grainline move grainline resize grainline resize grainline rotate grainline rotate grainline VToolDoublePoint Label VToolEllipticalArc Length Length Radius Radius Start angle End angle Label Rotation Rotation VToolFlippingByAxis Origin point Flipping by axis Flipping by axis VToolFlippingByLine First line point First line point Second line point Second line point flipping by line VToolHeight Length Length Angle Angle Label VToolLine Length Length Angle Angle VToolLineIntersect Label Error calculating point '%1'. Lines (%2;%3) and (%4;%5) have no point of intersection VToolLineIntersectAxis Length Length Angle Angle Label Error calculating point '%1'. Line (%2;%3) doesn't have intersection with axis through point '%4' and angle %5° VToolLinePoint Length Length Angle Angle Label VToolMove Rotation angle Length Length Center point Center point Angle Angle Rotation origin point move VToolOptionsPropertyBrowser Base point Base point Point label Point label Position Position Point at distance and angle Point at distance and angle Line type Line type Length Length Angle Angle Point at distance along line Point at distance along line Arc Arc Radius Radius First angle First angle Second angle Second angle Point along bisector Point along bisector Cut arc tool Cut arc tool Tool for segmenting a curve Tool for segmenting a curve Tool segment a pathed curve Tool segment a pathed curve Perpendicular point along line Perpendicular point along line Line between points Line between points Point at line intersection Point at line intersection Point along perpendicular Point along perpendicular Additional angle degrees Additional angle degrees Point at intersection of arc and line Point at intersection of arc and line Tool to make point from x & y of two other points Tool to make point from x & y of two other points Special point on shoulder Special point on shoulder Curve tool Curve tool Curve factor Curve factor Tool for path curve Tool for path curve Tool triangle Tool triangle Point intersection line and axis Point intersection line and axis Line color Line color Color Color Point intersection curve and axis Point intersection curve and axis First point First point Second point Second point Arc with given length Arc with given length True darts True darts Point 1 label Point 1 label Point 2 label Point 2 label Tool to make point from intersection two arcs Tool to make point from intersection two arcs Take Take Tool to make point from intersection two circles Tool to make point from intersection two circles First circle radius First circle radius Second circle radius Second circle radius Tool to make point from circle and tangent Tool to make point from circle and tangent Circle radius Circle radius Tool to make point from arc and tangent Tool to make point from arc and tangent Highest point Highest point Lowest point Lowest point Leftmost point Leftmost point Rightmost point Rightmost point Tool to make point from intersection two curves Tool to make point from intersection two curves Vertical correction Vertical correction Horizontal correction Horizontal correction Name Name C1: angle C1: angle C1: length C1: length C2: angle C2: angle C2: length C2: length Cubic bezier curve Cubic bezier curve Tool cubic bezier curve Tool cubic bezier curve Tool rotation Tool rotation Suffix Suffix Vertical axis Vertical axis Horizontal axis Horizontal axis Tool move Tool move Tool flipping by line Tool flipping by line Tool flipping by axis Tool flipping by axis Axis type Axis type Elliptical arc Elliptical arc Point label: Point label: Position: Position: Base point: Base point: Line type: Line type: Line color: Line color: Length: Length: Angle: Angle: First point: First point: Second point: Second point: Center point: Center point: Radius: Radius: First angle: First angle: Second angle: Second angle: Color: Color: Third point: Third point: Point 1 label: Point 1 label: Point 2 label: Point 2 label: First base point: First base point: Second base point: Second base point: First dart point: First dart point: Arc: Arc: Curve: Curve: First line point: First line point: Second line point: Second line point: First line (first point): First line (first point): First line (second point): First line (second point): Second line (first point): Second line (first point): Second line (second point): Second line (second point): Additional angle degrees: Additional angle degrees: Center of arc: Center of arc: Top of the line: Top of the line: End of the line: End of the line: X: vertical point: X: vertical point: Y: horizontal point: Y: horizontal point: First arc: First arc: Second arc: Second arc: Take: Take: Center of the first circle: Center of the first circle: Center of the second circle: Center of the second circle: First circle radius: First circle radius: Second circle radius: Second circle radius: First curve: First curve: Second curve: Second curve: Vertical correction: Vertical correction: Horizontal correction: Horizontal correction: Center of the circle: Center of the circle: Tangent point: Tangent point: Circle radius: Circle radius: Name: Name: C1: angle: C1: angle: C1: length: C1: length: C2: angle: C2: angle: C2: length: C2: length: First point of axis: First point of axis: Second point of axis: Second point of axis: Axis point: Axis point: Suffix: Suffix: Origin point: Origin point: Axis type: Axis type: Rotation angle: Rotation angle: Fourth point: Fourth point: Pen style: Pen style: Approximation scale: Rotation origin point: VToolPointFromArcAndTangent Error calculating point '%1'. Tangent to arc '%2' from point '%3' cannot be found VToolPointFromCircleAndTangent Error calculating point '%1'. Tangent to circle with center '%2' and radius '%3' from point '%4' cannot be found VToolPointOfContact Length Length Angle Angle Label Error calculating point '%1'. Circle with center '%2' and radius '%3' doesn't have intersection with line (%4;%5) VToolPointOfIntersectionArcs Error calculating point '%1'. Arcs '%2' and '%3' have no point of intersection VToolPointOfIntersectionCircles Error calculating point '%1'. Circles with centers in points '%2' and '%3' have no point of intersection VToolPointOfIntersectionCurves Error calculating point '%1'. Curves '%2' and '%3' have no point of intersection VToolRotation Origin point Rotation angle rotate VToolSeamAllowance Current seam allowance Current seam allowance move pattern piece label move pattern piece label resize pattern piece label resize pattern piece label rotate pattern piece label rotate pattern piece label move pattern info label move pattern info label resize pattern info label resize pattern info label rotate pattern info label rotate pattern info label move grainline move grainline resize grainline resize grainline rotate grainline rotate grainline Options Options In layout In layout Delete Delete apply save detail options multi deletion Forbid flipping Forbid flipping Force flipping This id (%1) is not unique. Tool was used after deleting. VToolShoulderPoint Length Length Angle Angle Label VToolTriangle Error calculating point '%1'. Point of intersection cannot be found VToolUnionDetails union details union details United detail United detail This id (%1) is not unique. VTranslateVars Bunka System name Bunka Bunka Fashion College Author name Bunka Fashion College Fundamentals of Garment Design Book name Fundamentals of Garment Design Barnfield and Richard System name Barnfield and Richard Jo Barnfield and Andrew Richards Author name Jo Barnfield and Andrew Richards Pattern Making Primer Book name Pattern Making Primer Friendship/Women System name Friendship/Women Elizabeth Friendship Author name Elizabeth Friendship Creating Historical Clothes - Pattern Cutting from the 16th to the 19th Centuries Book name Creating Historical Clothes - Pattern Cutting from the 16th to the 19th Centuries Morris, K. System name Morris, K. Karen Morris Author name Karen Morris Sewing Lingerie that Fits Book name Sewing Lingerie that Fits Castro System name Castro Lucia Mors de Castro Author name Lucia Mors de Castro Patternmaking in Practic Book name Patternmaking in Practic Kim & Uh System name Kim & Uh Injoo Kim and Mykyung Uh Author name Injoo Kim and Mykyung Uh Apparel Making in Fashion Design Book name Apparel Making in Fashion Design Waugh System name Waugh Norah Waugh Author name Norah Waugh Corsets and Crinolines Book name Corsets and Crinolines Grimble System name Grimble Frances Grimble Author name Frances Grimble Fashions of the Gilded Age Book name Fashions of the Gilded Age Thornton's International System System name Thornton's International System ed. R. L. Shep Author name ed. R. L. Shep The Great War: Styles and Patterns of the 1910s Book name The Great War: Styles and Patterns of the 1910s Hillhouse & Mansfield System name Hillhouse & Mansfield Marion S. Hillhouse and Evelyn A. Mansfield Author name Marion S. Hillhouse and Evelyn A. Mansfield Dress Design: Draping and Flat Pattern Making Book name Dress Design: Draping and Flat Pattern Making Pivnick System name Pivnick Esther Kaplan Pivnick Author name Esther Kaplan Pivnick How to Design Beautiful Clothes: Designing and Pattern Making Book name How to Design Beautiful Clothes: Designing and Pattern Making Minister & Son System name Minister & Son Edward Minister & Son, ed. R. L. Shep Author name Edward Minister & Son, ed. R. L. Shep The Complete Guide to Practical Cutting (1853) Book name The Complete Guide to Practical Cutting (1853) Strickland System name Strickland Gertrude Strickland Author name Gertrude Strickland A Tailoring Manual Book name A Tailoring Manual Loh & Lewis System name Loh & Lewis May Loh and Diehl Lewis Author name May Loh and Diehl Lewis Patternless Fashion Design Book name Patternless Fashion Design Morris, F. R. System name Morris, F. R. F. R. Morris Author name F. R. Morris Ladies Garment Cutting and Making Book name Ladies Garment Cutting and Making Mason System name Mason Gertrude Mason Author name Gertrude Mason Gertrude Mason's Patternmaking Book Book name Gertrude Mason's Patternmaking Book Kimata System name Kimata K. Kimata Author name K. Kimata K.Kimata's Simplified Drafting Book for Dressmaking Book name K.Kimata's Simplified Drafting Book for Dressmaking Master Designer System name Master Designer The Master Designer (Chicago, IL) Author name The Master Designer (Chicago, IL) Master Designer's System of Designing, Cutting and Grading Book name Master Designer's System of Designing, Cutting and Grading Kopp System name Kopp Ernestine Kopp, Vittorina Rolfo, Beatrice Zelin, Lee Gross Author name Ernestine Kopp, Vittorina Rolfo, Beatrice Zelin, Lee Gross How to Draft Basic Patterns Book name How to Draft Basic Patterns Ekern System name Ekern Doris Ekern Author name Doris Ekern Slacks Cut-to-Fit for Your Figure Book name Slacks Cut-to-Fit for Your Figure Doyle System name Doyle Sarah J. Doyle Author name Sarah J. Doyle Sarah's Key to Pattern Drafting Book name Sarah's Key to Pattern Drafting Shelton System name Shelton Karla J. Shelton Author name Karla J. Shelton Design and Sew Jeans Book name Design and Sew Jeans Lady Boutique System name Lady Boutique Lady Boutique Author name Lady Boutique Lady Boutique magazine (Japan) Book name Lady Boutique magazine (Japan) Rohr System name Rohr M. Rohr Author name M. Rohr Pattern Drafting and Grading: Women's nd Misses' Garment Design Book name Pattern Drafting and Grading: Women's nd Misses' Garment Design Moore System name Moore Dorothy Moore Author name Dorothy Moore Dorothy Moore's Pattern Drafting and Dressmaking Book name Dorothy Moore's Pattern Drafting and Dressmaking Abling System name Abling Bina Abling Author name Bina Abling Integrating Draping, Drafting and Drawing Book name Integrating Draping, Drafting and Drawing Fukomoto System name Fukomoto Sue S. Fukomoto Author name Sue S. Fukomoto Scientific Pattern Drafting as taught at Style Center School of Costume Design, Dressmaking and Millinery Book name Scientific Pattern Drafting as taught at Style Center School of Costume Design, Dressmaking and Millinery Dressmaking International System name Dressmaking International Dressmaking International Author name Dressmaking International Dressmaking International magazine (Japan) Book name Dressmaking International magazine (Japan) Erwin System name Erwin Mabel D. Erwin Author name Mabel D. Erwin Practical Dress Design Book name Practical Dress Design Gough System name Gough E. L. G. Gough Author name E. L. G. Gough Principles of Garment Cutting Book name Principles of Garment Cutting Allemong System name Allemong Elizabeth M. Allemong Author name Elizabeth M. Allemong European Cut Book name European Cut McCunn System name McCunn Donald H. McCunn Author name Donald H. McCunn How to Make Your Own Sewing Patterns Book name How to Make Your Own Sewing Patterns Zarapkar System name Zarapkar Shri K. R. Zarapkar and Shri Arvind K. Zarapkar Author name Shri K. R. Zarapkar and Shri Arvind K. Zarapkar Zarapkar System of Cutting Book name Zarapkar System of Cutting Kunick System name Kunick Philip Kunick Author name Philip Kunick Sizing, Pattern Construction and Grading for Women's and Children's Garments Book name Sizing, Pattern Construction and Grading for Women's and Children's Garments Handford System name Handford Jack Handford Author name Jack Handford Professional Patternmaking for Designers: Women's Wear, Men's Casual Wear Book name Professional Patternmaking for Designers: Women's Wear, Men's Casual Wear Davis System name Davis R. I. Davis Author name R. I. Davis Men's 17th & 18th Century Costume, Cut & Fashion Book name Men's 17th & 18th Century Costume, Cut & Fashion MacLochlainn System name MacLochlainn Jason MacLochlainn Author name Jason MacLochlainn The Victorian Tailor: An Introduction to Period Tailoring Book name The Victorian Tailor: An Introduction to Period Tailoring Joseph-Armstrong System name Joseph-Armstrong Helen Joseph-Armstrong Author name Helen Joseph-Armstrong Patternmaking for Fashion Design Book name Patternmaking for Fashion Design Supreme System System name Supreme System Frederick T. Croonberg Author name Frederick T. Croonberg The Blue Book of Men's Tailoring, Grand Edition of Supreme System for Producing Mens Garments (1907) Book name The Blue Book of Men's Tailoring, Grand Edition of Supreme System for Producing Mens Garments (1907) Sugino System name Sugino Dressmaking Author name Dressmaking Pattern Drafting Vols. I, II, III (Japan) Book name Pattern Drafting Vols. I, II, III (Japan) Centre Point System System name Centre Point System Louis Devere Author name Louis Devere The Handbook of Practical Cutting on the Centre Point System Book name The Handbook of Practical Cutting on the Centre Point System Aldrich/Men System name Aldrich/Men Winifred Aldrich Author name Winifred Aldrich Metric Pattern Cutting for Menswear Book name Metric Pattern Cutting for Menswear Aldrich/Women System name Aldrich/Women Metric Pattern Cutting for Women's Wear Book name Metric Pattern Cutting for Women's Wear Kershaw System name Kershaw Gareth Kershaw Author name Gareth Kershaw Patternmaking for Menswear Book name Patternmaking for Menswear Gilewska System name Gilewska Teresa Gilewska Author name Teresa Gilewska Pattern-Drafting for Fashion: The Basics Book name Pattern-Drafting for Fashion: The Basics Lo System name Lo Dennic Chunman Lo Author name Dennic Chunman Lo Pattern Cutting Book name Pattern Cutting Bray System name Bray Natalie Bray Author name Natalie Bray Dress Pattern Designing: The Basic Principles of Cut and Fit Book name Dress Pattern Designing: The Basic Principles of Cut and Fit Knowles/Men System name Knowles/Men Lori A. Knowles Author name Lori A. Knowles The Practical Guide to Patternmaking for Fashion Designers: Menswear Book name The Practical Guide to Patternmaking for Fashion Designers: Menswear Friendship/Men System name Friendship/Men Pattern Cutting for Men's Costume Book name Pattern Cutting for Men's Costume Brown System name Brown P. Clement Brown Author name P. Clement Brown Art in Dress Book name Art in Dress Mitchell System name Mitchell Jno. J. Mitchell Author name Jno. J. Mitchell "Standard" Work on Cutting (Men's Garments) 1886: The Art and Science of Garment Cutting Book name "Standard" Work on Cutting (Men's Garments) 1886: The Art and Science of Garment Cutting GOST 17917-86 System name GOST 17917-86 Ministry of consumer industry of the USSR Author name Ministry of consumer industry of the USSR Standard figure boys Book name Standard figure boys Eddy System name Eddy Josephine F. Eddy and Elizabeth C. B. Wiley Author name Josephine F. Eddy and Elizabeth C. B. Wiley Pattern and Dress Design Book name Pattern and Dress Design Knowles/Women System name Knowles/Women Practical Guide to Patternmaking for Fashion Designers: Juniors, Misses, and Women Book name Practical Guide to Patternmaking for Fashion Designers: Juniors, Misses, and Women American Garment Cutter System name American Garment Cutter None System name None Valentina team Author name Valentina team Valentina's internal standard Book name Valentina's internal standard Line_ Left symbol _ in name Line_ AngleLine_ Left symbol _ in name AngleLine_ Arc_ Left symbol _ in name Arc_ Spl_ Left symbol _ in name Spl_ SplPath Do not add symbol _ to the end of name SplPath RadiusArc_ Left symbol _ in name RadiusArc_ Angle1Arc_ Left symbol _ in name Angle1Arc_ Angle2Arc_ Left symbol _ in name Angle2Arc_ Angle1Spl_ Left symbol _ in name Angle1Spl_ Angle2Spl_ Left symbol _ in name Angle2Spl_ Angle1SplPath Do not add symbol _ to the end of name Angle1SplPath Angle2SplPath Do not add symbol _ to the end of name Angle2SplPath sin sine function sin cos cosine function cos tan tangens function tan asin arcus sine function asin acos arcus cosine function acos atan arcus tangens function atan sinh hyperbolic sine function sinh cosh hyperbolic cosine cosh tanh hyperbolic tangens function tanh asinh hyperbolic arcus sine function asinh acosh hyperbolic arcus tangens function acosh atanh hyperbolic arcur tangens function atanh log2 logarithm to the base 2 log2 log10 logarithm to the base 10 log10 log logarithm to the base 10 log ln logarithm to base e (2.71828...) ln exp e raised to the power of x exp sqrt square root of a value sqrt sign sign function -1 if x<0; 1 if x>0 sign rint round to nearest integer rint abs absolute value abs min min of all arguments min max max of all arguments max sum sum of all arguments sum avg mean value of all arguments avg fmod Returns the floating-point remainder of numer/denom (rounded towards zero) fmod cm centimeter cm mm millimeter mm in inch in Line_ Left symbol _ in the name Line_ AngleLine_ Left symbol _ in the name AngleLine_ Arc_ Left symbol _ in the name Arc_ Spl_ Left symbol _ in the name Spl_ SplPath Do not add symbol _ to the end of the name SplPath RadiusArc_ Left symbol _ in the name RadiusArc_ Angle1Arc_ Left symbol _ in the name Angle1Arc_ Angle2Arc_ Left symbol _ in the name Angle2Arc_ Angle1Spl_ Left symbol _ in the name Angle1Spl_ Angle2Spl_ Left symbol _ in the name Angle2Spl_ Angle1SplPath Do not add symbol _ to the end of the name Angle1SplPath Angle2SplPath Do not add symbol _ to the end of the name Angle2SplPath Seg_ Segment. Left symbol _ in the name Seg_ CurrentLength Do not add space between words CurrentLength acosh hyperbolic arcus cosine function acosh size placeholder size height placeholder height C1LengthSpl_ Left symbol _ in the name C1LengthSpl_ C2LengthSpl_ Left symbol _ in the name C2LengthSpl_ C1LengthSplPath Do not add symbol _ to the end of the name C1LengthSplPath C2LengthSplPath Do not add symbol _ to the end of the name C2LengthSplPath CurrentSeamAllowance Do not add space between words CurrentSeamAllowance degTorad converts degrees to radian degTorad radTodeg converts radian to degrees radTodeg sin sine function working with radians sin cos cosine function working with radians cos tan tangens function working with radians tan asin arcus sine function working with radians asin acos arcus cosine function working with radians acos atan arcus tangens function working with radians atan sinD sine function working with degrees sinD cosD cosine function working with degrees cosD tanD tangens function working with degrees tanD asinD arcus sine function working with degrees asinD acosD arcus cosine function working with degrees acosD atanD arcus tangens function working with degrees atanD M_ Left symbol _ in the name M_ Increment_ Left symbol _ in the name Increment_ ElArc_ Left symbol _ in the name Radius1ElArc_ Left symbol _ in the name Radius2ElArc_ Left symbol _ in the name Angle1ElArc_ Left symbol _ in the name Angle2ElArc_ Left symbol _ in the name r2cm round to up to 1 decimal csrCm cut, split and rotate modeling operation. Takes cm units. csrInch cut, split and rotate modeling operation. Takes inch units. RotationElArc_ Left symbol _ in the name converts degrees to radian functionm degTorad converts radian to degrees function radTodeg sine function working with radians function sin cosine function working with radians function cos tangens function working with radians function tan arcus sine function working with radians function asin arcus cosine function working with radians function acos arcus tangens function working with radians function atan hyperbolic sine function function sinh hyperbolic cosine function cosh hyperbolic tangens function function tanh hyperbolic arcus sine function function asinh hyperbolic arcus cosine function function acosh hyperbolic arcur tangens function function atanh sine function working with degrees function sinD cosine function working with degrees function cosD tangens function working with degrees function tanD arcus sine function working with degrees function asinD arcus cosine function working with degrees function acosD arcus tangens function working with degrees function atanD logarithm to the base 2 function log2 logarithm to the base 10 function log10 logarithm to the base 10 function log logarithm to base e (2.71828...) function ln e raised to the power of x function exp square root of a value function sqrt sign function -1 if x<0; 1 if x>0 function sign round to nearest integer function rint round to up to 1 decimal function r2cm cut, split and rotate modeling operation. Takes cm units. function csrCm cut, split and rotate modeling operation. Takes inch units. function csrInch absolute value function abs min of all arguments function min max of all arguments function max sum of all arguments function sum mean value of all arguments function avg Returns the floating-point remainder of numer/denom (rounded towards zero) function fmod VVITConverter Unexpected version "%1". Unexpected version "%1". Error restoring backup file: %1. Error restoring backup file: %1. VVSTConverter Unexpected version "%1". Unexpected version "%1". Error restoring backup file: %1. Error restoring backup file: %1. VWidgetDetails Form Form Unnamed Unnamed Select all Select all Select none Select none select all details select all details select none details select none details Invert selection Invert selection invert selection invert selection Hide not in layout Piece options Delete piece Cannot find piece by id '%1' VWidgetGroups Form Form Rename Rename Delete Delete Hide Show Hide All Show All Tags: Separate each tag with comma. Filter by tags Preferences Preferences Categories: %1. Valentina This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. VisToolCubicBezierPath Curved path: select seven or more points Curved path: select seven or more points Curved path: select seven or more points, Enter - finish creation Curved path: select seven or more points, Enter - finish creation Curved path: select more points for complete segment Curved path: select more points for complete segment Curved path: select seven or more points, %1 - finish creation VisToolCurveIntersectAxis Intersection curve and axis: angle = %1°; Shift - sticking angle, Enter - finish creation Intersection curve and axis: angle = %1°; Shift - sticking angle, Enter - finish creation Intersection curve and axis: angle = %1°; %2 - sticking angle, %3 - finish creation VisToolEndLine Point at distance and angle: angle = %1°; Shift - sticking angle, Enter - finish creation Point at distance and angle: angle = %1°; Shift - sticking angle, Enter - finish creation Point at distance and angle: angle = %1°, length = %2%3; Shift - sticking angle, Enter - finish creation Point at distance and angle: angle = %1°, length = %2%3; Shift - sticking angle, Enter - finish creation Point at distance and angle: angle = %1°, length = %2%3; %4 - sticking angle, %5 - finish creation VisToolLineIntersectAxis Intersection line and axis: angle = %1°; Shift - sticking angle, Enter - finish creation Intersection line and axis: angle = %1°; Shift - sticking angle, Enter - finish creation Intersection line and axis: angle = %1°; %2 - sticking angle, %3 - finish creation VisToolMove Length = %1%2, angle = %3°, Shift - sticking angle, Mouse click - finish creation Length = %1%2, angle = %3°, Shift - sticking angle, Mouse click - finish creation Length = %1%2, angle = %3°, %4 - sticking angle, Mouse click - finish selecting a position Length = %1%2, angle = %3°, rotation angle = %4°, %5 - sticking angle, %6 - change rotation origin point, Mouse click - finish creating VisToolRotation Rotating angle = %1°, Shift - sticking angle, Mouse click - finish creation Rotating angle = %1°, Shift - sticking angle, Mouse click - finish creation Rotating angle = %1°, %2 - sticking angle, Mouse click - finish creation VisToolSpline Use Shift for sticking angle! Use Shift for sticking angle! Use %1 for sticking angle! VisToolSplinePath Curved path: select three or more points Curved path: select three or more points Curved path: select three or more points, Enter - finish creation Curved path: select three or more points, Enter - finish creation Use Shift for sticking angle! Use Shift for sticking angle! Curved path: select three or more points, %1 - finish creation Use %1 for sticking angle! WatermarkWindow Watermark Opacity: Text Text: watermark text Rotation: Rotation: Font: The quick brown fox jumps over the lazy dog Use native text to test a font options Edit font Image Path: Path: path to image Browse… Gray color &File &File Operations Operations Save Save Save &As… E&xit E&xit Open Open New New Images Images Watermark image File error. File error. Watermark files Save as Save as watermark Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Could not save file Could not save file Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. The document has no write permissions. The document has no write permissions. Cannot set permissions for %1 to writable. Cannot set permissions for %1 to writable. Could not save the file. Could not save the file. Could not save the file Could not save the file Open file Open file Unsaved changes Unsaved changes The watermark has been modified. Do you want to save your changes? Don't Save Don't Save read only read only untitled.vwm Confirm format rewriting This file is using previous format version v%1. The current is v%2. Saving the file with this app version will update the format version for this file. This may prevent you from be able to open the file with older app versions. Do you really want to continue? File saved File saved Locking file Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). Do you want to change the premissions? mNoisyHandler DEBUG: DEBUG: WARNING: WARNING: CRITICAL: CRITICAL: FATAL: FATAL: INFO: INFO: Warning. Warning. Critical error. Critical error. Fatal error. Fatal error. Information. Information. Warning Warning Critical error Critical error Fatal error Fatal error Information Information vNoisyHandler DEBUG: DEBUG: WARNING: WARNING: CRITICAL: CRITICAL: FATAL: FATAL: INFO: INFO: Warning. Warning. Critical error. Critical error. Fatal error. Fatal error. Information. Information. Warning Warning Critical error Critical error Fatal error Fatal error Information Information