Lupdate.

share/translations/valentina_cs_CZ.ts

@@ -54,7 +54,7 @@
     <name>ChangeGroupOptions</name>
     <message>
         <source>rename group</source>
-        <translation type="unfinished"></translation>
+        <translation>Přejmenovat skupinu</translation>
     </message>
 </context>
 <context>
@@ -691,11 +691,11 @@
     </message>
     <message>
         <source>Approximation scale:</source>
-        <translation>Stupnice přibližnosti:</translation>
+        <translation>Měřítko přibližnosti:</translation>
     </message>
     <message>
         <source>Set approximation scale for this curve, 0 - use global value</source>
-        <translation>Nastavit stupnici přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
+        <translation>Nastavit měřítko přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
     </message>
 </context>
 <context>
@@ -806,11 +806,11 @@
     </message>
     <message>
         <source>Approximation scale:</source>
-        <translation>Stupnice přibližnosti:</translation>
+        <translation>Měřítko přibližnosti:</translation>
     </message>
     <message>
         <source>Set approximation scale for this curve, 0 - use global value</source>
-        <translation>Nastavit stupnici přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
+        <translation>Nastavit měřítko přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
     </message>
 </context>
 <context>
@@ -988,11 +988,11 @@
     </message>
     <message>
         <source>Approximation Scale:</source>
-        <translation>Stupnice přibližnosti:</translation>
+        <translation>Měřítko přibližnosti:</translation>
     </message>
     <message>
         <source>Set approximation scale for this curve, 0 - use global value</source>
-        <translation>Nastavit stupnici přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
+        <translation>Nastavit měřítko přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
     </message>
 </context>
 <context>
@@ -1031,11 +1031,11 @@
     </message>
     <message>
         <source>Approximation scale:</source>
-        <translation>Stupnice přibližnosti:</translation>
+        <translation>Měřítko přibližnosti:</translation>
     </message>
     <message>
         <source>Set approximation scale for this curve, 0 - use global value</source>
-        <translation>Nastavit stupnici přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
+        <translation>Nastavit měřítko přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
     </message>
     <message>
         <source>Cannot find point with id %1</source>
@@ -2456,11 +2456,11 @@
     </message>
     <message>
         <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="unfinished"></translation>
+        <translation>Povolit vytvoření skupiny viditelnosti z původních předmětů</translation>
     </message>
     <message>
         <source>Visibility Group</source>
-        <translation type="unfinished"></translation>
+        <translation>Skupina viditelnosti</translation>
     </message>
     <message>
         <source>Name:</source>
@@ -2472,15 +2472,15 @@
     </message>
     <message>
         <source>Tags:</source>
-        <translation type="unfinished"></translation>
+        <translation>Značky:</translation>
     </message>
     <message>
         <source>Separate each tag with comma.</source>
-        <translation type="unfinished"></translation>
+        <translation>Oddělit každou značku čárkou.</translation>
     </message>
     <message>
         <source>Add tags</source>
-        <translation type="unfinished"></translation>
+        <translation>Přidat značky</translation>
     </message>
 </context>
 <context>
@@ -2523,11 +2523,11 @@
     </message>
     <message>
         <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="unfinished"></translation>
+        <translation>Povolit vytvoření skupiny viditelnosti z původních předmětů</translation>
     </message>
     <message>
         <source>Visibility Group</source>
-        <translation type="unfinished"></translation>
+        <translation>Skupina viditelnosti</translation>
     </message>
     <message>
         <source>Name:</source>
@@ -2539,15 +2539,15 @@
     </message>
     <message>
         <source>Tags:</source>
-        <translation type="unfinished"></translation>
+        <translation>Značky:</translation>
     </message>
     <message>
         <source>Separate each tag with comma.</source>
-        <translation type="unfinished"></translation>
+        <translation>Oddělit každou značku čárkou.</translation>
     </message>
     <message>
         <source>Add tags</source>
-        <translation type="unfinished"></translation>
+        <translation>Přidat značky</translation>
     </message>
 </context>
 <context>
@@ -2574,15 +2574,15 @@
     </message>
     <message>
         <source>Tags:</source>
-        <translation type="unfinished"></translation>
+        <translation>Značky:</translation>
     </message>
     <message>
         <source>Separate each tag with comma.</source>
-        <translation type="unfinished"></translation>
+        <translation>Oddělit každou značku čárkou.</translation>
     </message>
     <message>
         <source>Add tags</source>
-        <translation type="unfinished"></translation>
+        <translation>Přidat značky</translation>
     </message>
 </context>
 <context>
@@ -3127,7 +3127,7 @@
     <name>DialogLayoutScale</name>
     <message>
         <source>Layout scale</source>
-        <translation type="unfinished"></translation>
+        <translation>Měřítko rozvržení</translation>
     </message>
     <message>
         <source>Margins</source>
@@ -3155,15 +3155,15 @@
     </message>
     <message>
         <source>Scale</source>
-        <translation type="unfinished"></translation>
+        <translation>Měřítko</translation>
     </message>
     <message>
         <source>Horizontal:</source>
-        <translation type="unfinished"></translation>
+        <translation>Vodorovná:</translation>
     </message>
     <message>
         <source>Vertical:</source>
-        <translation type="unfinished"></translation>
+        <translation>Svislá:</translation>
     </message>
 </context>
 <context>
@@ -3461,7 +3461,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Prefer one sheet solution</source>
-        <translation type="unfinished"></translation>
+        <translation>Upřednostnit jednolistové řešení</translation>
     </message>
     <message>
         <source> min</source>
@@ -3470,7 +3470,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Enable this option to prefer getting one sheet solutions.</source>
-        <translation type="unfinished"></translation>
+        <translation>Povolit tuto volbu, aby se upřednostňovalo získání jednolistového řešení.</translation>
     </message>
 </context>
 <context>
@@ -3886,11 +3886,11 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="unfinished"></translation>
+        <translation>Povolit vytvoření skupiny viditelnosti z původních předmětů</translation>
     </message>
     <message>
         <source>Visibility Group</source>
-        <translation type="unfinished"></translation>
+        <translation>Skupina viditelnosti</translation>
     </message>
     <message>
         <source>Name:</source>
@@ -3902,15 +3902,15 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Tags:</source>
-        <translation type="unfinished"></translation>
+        <translation>Značky:</translation>
     </message>
     <message>
         <source>Separate each tag with comma.</source>
-        <translation type="unfinished"></translation>
+        <translation>Oddělit každou značku čárkou.</translation>
     </message>
     <message>
         <source>Add tags</source>
-        <translation type="unfinished"></translation>
+        <translation>Přidat značky</translation>
     </message>
 </context>
 <context>
@@ -4843,7 +4843,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Select main path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
+        <translation>Vybrat hlavní cestu předmětů, &lt;b&gt;%1&lt;/b&gt; - obrátit směr křivky, &lt;b&gt;%2&lt;/b&gt; - dokončit vytvoření</translation>
     </message>
     <message>
         <source>Manual length</source>
@@ -5584,11 +5584,11 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Enable to create a visibility gropup from original objects</source>
-        <translation type="unfinished"></translation>
+        <translation>Povolit vytvoření skupiny viditelnosti z původních předmětů</translation>
     </message>
     <message>
         <source>Visibility Group</source>
-        <translation type="unfinished"></translation>
+        <translation>Skupina viditelnosti</translation>
     </message>
     <message>
         <source>Name:</source>
@@ -5596,15 +5596,15 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Tags:</source>
-        <translation type="unfinished"></translation>
+        <translation>Značky:</translation>
     </message>
     <message>
         <source>Separate each tag with comma.</source>
-        <translation type="unfinished"></translation>
+        <translation>Oddělit každou značku čárkou.</translation>
     </message>
     <message>
         <source>Add tags</source>
-        <translation type="unfinished"></translation>
+        <translation>Přidat značky</translation>
     </message>
 </context>
 <context>
@@ -5715,15 +5715,15 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Scale</source>
-        <translation type="unfinished"></translation>
+        <translation>Měřítko</translation>
     </message>
     <message>
         <source>Horizontal:</source>
-        <translation type="unfinished"></translation>
+        <translation>Vodorovná:</translation>
     </message>
     <message>
         <source>Vertical:</source>
-        <translation type="unfinished"></translation>
+        <translation>Svislá:</translation>
     </message>
 </context>
 <context>
@@ -5806,7 +5806,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>tiled</source>
-        <translation type="unfinished"></translation>
+        <translation>dlážděný</translation>
     </message>
     <message>
         <source>Numerical control</source>
@@ -6029,7 +6029,7 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Select main path objects clockwise, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
+        <translation>Vybrat hlavní cestu předmětů po směru hodinových ručiček (doprava), &lt;b&gt;%1&lt;/b&gt; - obrátit směr křivky, &lt;b&gt;%2&lt;/b&gt; - dokončit vytvoření</translation>
     </message>
     <message>
         <source>Circle</source>
@@ -6314,11 +6314,11 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Approximation scale:</source>
-        <translation>Stupnice přibližnosti:</translation>
+        <translation>Měřítko přibližnosti:</translation>
     </message>
     <message>
         <source>Set approximation scale for this curve, 0 - use global value</source>
-        <translation>Nastavit stupnici přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
+        <translation>Nastavit měřítko přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
     </message>
 </context>
 <context>
@@ -6457,11 +6457,11 @@ Přesto použít nastavení?</translation>
     </message>
     <message>
         <source>Approximation scale:</source>
-        <translation>Stupnice přibližnosti:</translation>
+        <translation>Měřítko přibližnosti:</translation>
     </message>
     <message>
         <source>Set approximation scale for this curve, 0 - use global value</source>
-        <translation>Nastavit stupnici přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
+        <translation>Nastavit měřítko přibližnosti pro tuto křivku, 0 - použít celkovou hodnotu</translation>
     </message>
     <message>
         <source>Cannot find point with id %1</source>
@@ -6484,10 +6484,10 @@ Přesto použít nastavení?</translation>
     </message>
     <message numerus="yes">
         <source>Followed %n option(s) require restart to take effect: %1.</source>
-        <translation type="unfinished">
+        <translation>
-            <numerusform>Následována %n volba, vyžaduje opětovné spuštění, aby se projevilo: %1.</numerusform>
+            <numerusform>Sledováno %n volba vyžaduje opětovné spuštění, aby se projevila %1.</numerusform>
-            <numerusform>Následovány %n volby, vyžaduje opětovné spuštění, aby se projevilo: %1.</numerusform>
+            <numerusform>Sledováno %n volby vyžaduje opětovné spuštění, aby se projevily %1.</numerusform>
-            <numerusform>Následováno %n voleb, vyžaduje opětovné spuštění, aby se projevilo: %1.</numerusform>
+            <numerusform>Sledováno %n voleb vyžaduje opětovné spuštění, aby se projevilo %1.</numerusform>
         </translation>
     </message>
 </context>
@@ -8341,15 +8341,15 @@ Chcete uložit své změny?</translation>
     </message>
     <message>
         <source>Select path objects, &lt;b&gt;%1&lt;/b&gt; - reverse direction curve</source>
-        <translation type="unfinished"></translation>
+        <translation>Vyberte předměty cesty, &lt;b&gt;%1&lt;/b&gt; - obrátitkřivku směru</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - finish creation</source>
-        <translation type="unfinished"></translation>
+        <translation>Vyberte jeden nebo více předmětů, podržet &lt;b&gt;%1&lt;/b&gt; - pro vícenásobný výběr, &lt;b&gt;%2&lt;/b&gt; - dokončit vytvoření</translation>
     </message>
     <message>
         <source>Select one or more objects, hold &lt;b&gt;%1&lt;/b&gt; - for multiple selection, &lt;b&gt;%2&lt;/b&gt; - confirm selection</source>
-        <translation type="unfinished"></translation>
+        <translation>Vyberte jeden nebo více předmětů, podržet &lt;b&gt;%1&lt;/b&gt; - pro vícenásobný výběr, &lt;b&gt;%2&lt;/b&gt; - potvrdit výběr</translation>
     </message>
     <message>
         <source>Point of intersection circle and segment</source>
@@ -8972,7 +8972,7 @@ Chcete uložit své změny?</translation>
     </message>
     <message>
         <source>Scale scrolling sensitivity for mouse with sensor</source>
-        <translation>Citlivost rozsahu posunování pro myš s čidlem</translation>
+        <translation>Citlivost posunování měřítka pro myš s čidlem</translation>
     </message>
     <message>
         <source>Wheel:</source>
@@ -8981,7 +8981,7 @@ Chcete uložit své změny?</translation>
     </message>
     <message>
         <source>Scale scrolling sensitivity for mouse with wheel</source>
-        <translation>Citlivost rozsahu posunování pro myš s kolečkem</translation>
+        <translation>Citlivost posunování měřítka pro myš s kolečkem</translation>
     </message>
     <message>
         <source>Acceleration:</source>
@@ -9155,7 +9155,7 @@ Chcete uložit své změny?</translation>
     </message>
     <message>
         <source>Set default curve approximation scale</source>
-        <translation>Nastavit stupnici přibližnosti výchozí křivky</translation>
+        <translation>Nastavit výchozí měřítko přibližnosti křivky</translation>
     </message>
     <message>
         <source>Bold line width</source>
@@ -9527,11 +9527,11 @@ Tato volba se projeví po opětovném spuštění.</translation>
     </message>
     <message>
         <source>Empty list of nodes for tool with id &apos;%1&apos;.</source>
-        <translation type="unfinished"></translation>
+        <translation>Prázdný seznam uzlů pro nástroj s ID &apos;%1&apos;.</translation>
     </message>
     <message>
         <source>Invalid formula &apos;%1&apos; for tool with id &apos;%2&apos;. %3.</source>
-        <translation type="unfinished"></translation>
+        <translation>Neplatný vzorec &apos;%1&apos; pro nástroj s ID &apos;%2&apos;. %3.</translation>
     </message>
     <message>
         <source>Can&apos;t convert toInt parameter</source>
@@ -9760,7 +9760,7 @@ Tato volba se projeví po opětovném spuštění.</translation>
     <name>RenameGroup</name>
     <message>
         <source>rename group</source>
-        <translation type="unfinished"></translation>
+        <translation>Přejmenovat skupinu</translation>
     </message>
 </context>
 <context>
@@ -11541,7 +11541,7 @@ Chcete uložit změny?</translation>
     </message>
     <message>
         <source>Visibility group</source>
-        <translation type="unfinished"></translation>
+        <translation>Skupina viditelnosti</translation>
     </message>
 </context>
 <context>
@@ -12233,19 +12233,19 @@ Chcete uložit změny?</translation>
     </message>
     <message>
         <source>Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode).</source>
-        <translation type="unfinished"></translation>
+        <translation>Nastavit vodorovné měřítko od 0.01 do 3.0 (výchozí = 1.0, režim vyvedení).</translation>
     </message>
     <message>
         <source>Horizontal scale</source>
-        <translation type="unfinished"></translation>
+        <translation>Vodorovné měřítko</translation>
     </message>
     <message>
         <source>Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode).</source>
-        <translation type="unfinished"></translation>
+        <translation>Nastavit svislé měřítko od 0.01 do 3.0 (výchozí = 1.0, režim vyvedení).</translation>
     </message>
     <message>
         <source>Vertical scale</source>
-        <translation type="unfinished"></translation>
+        <translation>Svislé měřítko</translation>
     </message>
     <message>
         <source>Prefer one sheet layout solution (export mode).</source>
@@ -13945,7 +13945,7 @@ Chcete uložit změny?</translation>
     </message>
     <message>
         <source>Approximation scale:</source>
-        <translation>Stupnice přibližnosti:</translation>
+        <translation>Měřítko přibližnosti:</translation>
     </message>
     <message>
         <source>Rotation origin point:</source>
@@ -15810,11 +15810,11 @@ Chcete uložit změny?</translation>
     </message>
     <message>
         <source>Tags:</source>
-        <translation type="unfinished"></translation>
+        <translation>Značky:</translation>
     </message>
     <message>
         <source>Separate each tag with comma.</source>
-        <translation type="unfinished"></translation>
+        <translation>Oddělit každou značku čárkou.</translation>
     </message>
     <message>
         <source>Filter by tags</source>

share/translations/valentina_it_IT.ts

@@ -1656,7 +1656,7 @@
     <name>DialogDuplicateDetail</name>
     <message>
         <source>Dialog duplicate detail</source>
-        <translation type="unfinished"></translation>
+        <translation>Strumento duplica dettaglio</translation>
     </message>
     <message>
         <source>Click to place duplicate</source>
@@ -4715,7 +4715,7 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>Select if need designate the corner point as a passmark. Show only left passmark.</source>
-        <translation type="unfinished"></translation>
+        <translation>Seleziona se vuoi impostare un punto ad angolo come tacca. Mostra solo tacca a sinistra dell&apos;angolo.</translation>
     </message>
     <message>
         <source>Intersection (only left)</source>
@@ -4723,7 +4723,7 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>Select if need designate the corner point as a passmark. Show only right passmark.</source>
-        <translation type="unfinished"></translation>
+        <translation>Seleziona se vuoi impostare un punto ad angolo come tacca. Mostra solo tacca a destra dell&apos;angolo.</translation>
     </message>
     <message>
         <source>Intersection (only right)</source>
@@ -4739,7 +4739,7 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>Create a formula that regulates visibility. Values different from &quot;0&quot; make a path visible.</source>
-        <translation type="unfinished"></translation>
+        <translation>Crea una formula che regola la visibilità. Valori differenti da 0 rendono un tracciato visibile.</translation>
     </message>
     <message>
         <source>1</source>
@@ -4791,7 +4791,7 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>The path is a cut contour. Use to control export to DXF-AAMA</source>
-        <translation type="unfinished"></translation>
+        <translation>Il tracciato e una linea di ritaglio. Usa per regolare l&apos;esportazione nel formato DXF-AAMA</translation>
     </message>
     <message>
         <source>The list of pieces is empty. Please, first create at least one piece for current pattern piece.</source>
@@ -4862,7 +4862,7 @@ Applicare la configurazione comunque?</translation>
     <name>DialogPin</name>
     <message>
         <source>Pin tool</source>
-        <translation type="unfinished"></translation>
+        <translation>Strumento spillo</translation>
     </message>
     <message>
         <source>Point:</source>
@@ -4874,7 +4874,7 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>Pin</source>
-        <translation type="unfinished"></translation>
+        <translation>Spillo</translation>
     </message>
     <message>
         <source>The list of pieces is empty. Please, first create at least one piece for current pattern piece.</source>
@@ -4985,7 +4985,7 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>Create a formula that regulates visibility. Values different from &quot;0&quot; make a path visible.</source>
-        <translation type="unfinished"></translation>
+        <translation>Crea una formula che regola la visibilità. Valori differenti da 0 rendono un tracciato visibile.</translation>
     </message>
     <message>
         <source>1</source>
@@ -5571,7 +5571,7 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>This point cannot be origin point. Please, select another origin point</source>
-        <translation type="unfinished"></translation>
+        <translation>Questo non può essere il punto di origine. Selezionane un altro, grazie</translation>
     </message>
     <message>
         <source>Enable to create a visibility gropup from original objects</source>
@@ -5908,11 +5908,11 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>Pins</source>
-        <translation type="unfinished"></translation>
+        <translation>Spilli</translation>
     </message>
     <message>
         <source>no pin</source>
-        <translation type="unfinished"></translation>
+        <translation>Nessuno spillo</translation>
     </message>
     <message>
         <source>Labels</source>
@@ -5960,7 +5960,7 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>Workpiece tool</source>
-        <translation type="unfinished"></translation>
+        <translation>Strumento crea dettaglio</translation>
     </message>
     <message>
         <source>Segment</source>
@@ -6541,19 +6541,19 @@ Applicare la configurazione comunque?</translation>
     </message>
     <message>
         <source>by first edge symmetry</source>
-        <translation type="unfinished"></translation>
+        <translation>Secondo simmetria del primo contorno</translation>
     </message>
     <message>
         <source>by second edge symmetry</source>
-        <translation type="unfinished"></translation>
+        <translation>Secondo la simmetria del secondo contorno</translation>
     </message>
     <message>
         <source>by first edge right angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Secondo l&apos;angolo destro del primo contorno</translation>
     </message>
     <message>
         <source>by second edge right angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Seguendo l&apos;angolo destro del secondo contorno</translation>
     </message>
 </context>
 <context>
@@ -8139,11 +8139,11 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>Pin tool</source>
-        <translation type="unfinished"></translation>
+        <translation>Strumento spillo</translation>
     </message>
     <message>
         <source>Select pin point</source>
-        <translation type="unfinished"></translation>
+        <translation>Selezionare punto per spillo</translation>
     </message>
     <message>
         <source>Insert node tool</source>
@@ -8183,7 +8183,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>You can&apos;t use Layout mode yet. Please, include at least one detail in layout.</source>
-        <translation type="unfinished"></translation>
+        <translation>Non puoi ancora usare la modalità Layout. Seleziona almeno un dettaglio per il layout, grazie.</translation>
     </message>
     <message>
         <source>You can&apos;t use Layout mode yet.</source>
@@ -8227,7 +8227,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>Workpiece tool</source>
-        <translation type="unfinished"></translation>
+        <translation>Strumento crea dettaglio</translation>
     </message>
     <message>
         <source>Internal path tool</source>
@@ -8884,7 +8884,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>With OS options</source>
-        <translation type="unfinished"></translation>
+        <translation>Come da opzioni del Sistema Operativo</translation>
     </message>
     <message>
         <source>Centimeters</source>
@@ -8916,7 +8916,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>Double click calls Zoom fit best for current pattern piece</source>
-        <translation type="unfinished"></translation>
+        <translation>Doppio clic per zoom migliore adattamento per l&apos;attuale pezzo del modello</translation>
     </message>
     <message>
         <source>Scrolling</source>
@@ -8949,7 +8949,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>Mouse scale</source>
-        <translation type="unfinished"></translation>
+        <translation>Scala mouse</translation>
     </message>
     <message>
         <source>Sensor:</source>
@@ -8971,7 +8971,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>Acceleration:</source>
-        <translation type="unfinished"></translation>
+        <translation>Accelerazione:</translation>
     </message>
     <message>
         <source>User Interface</source>
@@ -9030,7 +9030,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>My Templates</source>
-        <translation type="unfinished"></translation>
+        <translation>I miei Modelli</translation>
     </message>
     <message>
         <source>My label templates</source>
@@ -9077,7 +9077,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>By default hide the main path if the seam allowance was enabled</source>
-        <translation type="unfinished"></translation>
+        <translation>Nasconde automaticamente il tracciato principale se il margine di cucitura è abilitato</translation>
     </message>
     <message>
         <source>Hide main path</source>
@@ -9149,7 +9149,7 @@ Vuoi salvare i cambiamenti?</translation>
     </message>
     <message>
         <source>Line width:</source>
-        <translation type="unfinished"></translation>
+        <translation>Spessore linea:</translation>
     </message>
     <message>
         <source>Millimiters</source>
@@ -9417,15 +9417,15 @@ Questa opzione sarà effettiva dopo il riavvio del programma.</translation>
     </message>
     <message>
         <source>Error in internal path &apos;%1&apos;. There is no intersection of first point with cutting countour</source>
-        <translation type="unfinished"></translation>
+        <translation>Errore nel tracciato interno &apos;%1&apos;. Non c&apos;è intersezione tra il primo punto e il contorno di ritaglio</translation>
     </message>
     <message>
         <source>Error in internal path &apos;%1&apos;. There is no intersection of last point with cutting countour</source>
-        <translation type="unfinished"></translation>
+        <translation>Errore nel tracciato interno &apos;%1&apos;. Non c&apos;è intersezione tra l&apos;ultimo punto e il contorno di ritaglio</translation>
     </message>
     <message>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Seam allowance is empty.</source>
-        <translation type="unfinished"></translation>
+        <translation>Impossibile calcolare una tacca per il punto &apos;%1&apos; nel pezzo &apos;%2&apos;. Il margine di cucitura non è ancora stato stabilito.</translation>
     </message>
     <message>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find position for a notch.</source>
@@ -9433,15 +9433,15 @@ Questa opzione sarà effettiva dopo il riavvio del programma.</translation>
     </message>
     <message>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Unable to fix a notch position.</source>
-        <translation type="unfinished"></translation>
+        <translation>Impossibile calcolare una tacca per il punto &apos;%1&apos; nel pezzo &apos;%2&apos;. Impossibile trovare una posizione per la tacca.</translation>
     </message>
     <message>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Notch collapse.</source>
-        <translation type="unfinished"></translation>
+        <translation>Impossibile calcolare una tacca per il punto &apos;%1&apos; nel pezzo &apos;%2&apos;. La tacca collassa.</translation>
     </message>
     <message>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;. Cannot find intersection.</source>
-        <translation type="unfinished"></translation>
+        <translation>Impossibile calcolare una tacca per il punto &apos;%1&apos; nel pezzo &apos;%2&apos;. Impossibile trovare un&apos;intersezione.</translation>
     </message>
     <message>
         <source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
@@ -10453,7 +10453,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Export from multisize measurements is not supported.</source>
-        <translation type="unfinished"></translation>
+        <translation>Esportazione da misure multitaglia non supportata.</translation>
     </message>
     <message>
         <source>Customer name:</source>
@@ -10477,7 +10477,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Measurement name in is empty.</source>
-        <translation type="unfinished"></translation>
+        <translation>Nome della misura mancante.</translation>
     </message>
     <message>
         <source>Merasurement &apos;%1&apos; doesn&apos;t match regex pattern.</source>
@@ -10497,7 +10497,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Error in row %1.</source>
-        <translation type="unfinished"></translation>
+        <translation>Errore nella riga %1.</translation>
     </message>
     <message>
         <source>Multisize measurements require at least 4 columns.</source>
@@ -10521,7 +10521,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Error in row %1. Measurement name is empty.</source>
-        <translation type="unfinished"></translation>
+        <translation>Errore nella riga %1. Nome misura mancante.</translation>
     </message>
     <message>
         <source>Cannot save settings. Access denied.</source>
@@ -10659,7 +10659,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Detail label visible</source>
-        <translation type="unfinished">Dettaglio etichetta visibile</translation>
+        <translation>Attiva/Disattiva Etichetta del Dettaglio</translation>
     </message>
     <message>
         <source>Width:</source>
@@ -10703,7 +10703,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Pattern label visible</source>
-        <translation type="unfinished">Modello etichetta visibile</translation>
+        <translation>Attiva/Disattiva Etichetta del Modello</translation>
     </message>
     <message>
         <source>Label template:</source>
@@ -10731,7 +10731,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>A text field to add comments in</source>
-        <translation type="unfinished"></translation>
+        <translation>Uno spazio di testo per aggiungere commenti</translation>
     </message>
     <message>
         <source>Orientation:</source>
@@ -10751,11 +10751,11 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Edit piece label template</source>
-        <translation type="unfinished"></translation>
+        <translation>Modifica modello di etichetta</translation>
     </message>
     <message>
         <source>Options to control position a detail label. &lt;b&gt;Not available if a detail label template is empty&lt;/b&gt;.</source>
-        <translation type="unfinished"></translation>
+        <translation>Opzione per regolare la visibilità e posizione dell&apos;etichetta. &lt;b&gt;Non disponibile se il modello etichetta non è stato caricato&lt;/b&gt;.</translation>
     </message>
     <message>
         <source>Options to control position a pattern label. &lt;b&gt;Not available if a pattern label template is empty&lt;/b&gt;.</source>
@@ -10822,7 +10822,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Select if need designate the corner point as a passmark. Show only left passmark.</source>
-        <translation type="unfinished"></translation>
+        <translation>Seleziona se vuoi impostare un punto ad angolo come tacca. Mostra solo tacca a sinistra dell&apos;angolo.</translation>
     </message>
     <message>
         <source>Intersection (only left)</source>
@@ -10830,7 +10830,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Select if need designate the corner point as a passmark. Show only right passmark.</source>
-        <translation type="unfinished"></translation>
+        <translation>Seleziona se vuoi impostare un punto ad angolo come tacca. Mostra solo tacca a destra dell&apos;angolo.</translation>
     </message>
     <message>
         <source>Intersection (only right)</source>
@@ -11253,7 +11253,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>With OS options</source>
-        <translation type="unfinished"></translation>
+        <translation>Come da opzioni del Sistema Operativo</translation>
     </message>
     <message>
         <source>User Interface</source>
@@ -11304,7 +11304,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>My Templates</source>
-        <translation type="unfinished"></translation>
+        <translation>I miei Modelli</translation>
     </message>
     <message>
         <source>My Patterns</source>
@@ -11399,11 +11399,11 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Invalid version. Minimum supported format version is %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Versione non valida. La versione minima supportata è %1</translation>
     </message>
     <message>
         <source>Invalid version. Maximum supported format version is %1</source>
-        <translation type="unfinished"></translation>
+        <translation>Versione non valida. La versione massima supportata è %1</translation>
     </message>
     <message>
         <source>Can&apos;t open file %1:
@@ -11692,7 +11692,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Invalid notch.</source>
-        <translation type="unfinished"></translation>
+        <translation>Tacca non valida.</translation>
     </message>
 </context>
 <context>
@@ -11990,7 +11990,7 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>Export text as paths.</source>
-        <translation type="unfinished"></translation>
+        <translation>Esporta testo come tracciato.</translation>
     </message>
     <message>
         <source>Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored.</source>
@@ -12488,19 +12488,19 @@ Vuoi salvare le tue modifiche?</translation>
     </message>
     <message>
         <source>by first edge symmetry</source>
-        <translation type="unfinished"></translation>
+        <translation>Secondo simmetria del primo contorno</translation>
     </message>
     <message>
         <source>by second edge symmetry</source>
-        <translation type="unfinished"></translation>
+        <translation>Secondo la simmetria del secondo contorno</translation>
     </message>
     <message>
         <source>by first edge right angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Secondo l&apos;angolo destro del primo contorno</translation>
     </message>
     <message>
         <source>by second edge right angle</source>
-        <translation type="unfinished"></translation>
+        <translation>Seguendo l&apos;angolo destro del secondo contorno</translation>
     </message>
     <message>
         <source>Passmark</source>
@@ -12898,7 +12898,7 @@ Vuoi salvare le tue modifiche?</translation>
     <name>VPiece</name>
     <message>
         <source>Cannot calculate a notch for point &apos;%1&apos; in piece &apos;%2&apos;.</source>
-        <translation type="unfinished"></translation>
+        <translation>Impossibile calcolare una tacca per il punto &apos;%1&apos; nel pezzo &apos;%2&apos;.</translation>
     </message>
     <message>
         <source>Notch for point &apos;%1&apos; in piece &apos;%2&apos; will be disabled. Manual length is less than allowed value.</source>

share/translations/valentina_ru_RU.ts

@@ -14017,7 +14017,7 @@ Do you want to save your changes?</source>
     </message>
     <message>
         <source>rotate</source>
-        <translation type="unfinished"></translation>
+        <translation>поворот</translation>
     </message>
 </context>
 <context>