diff --git a/share/translations/measurements_p0_pt_BR.ts b/share/translations/measurements_p0_pt_BR.ts index 01dc749a2..3ea58f57c 100644 --- a/share/translations/measurements_p0_pt_BR.ts +++ b/share/translations/measurements_p0_pt_BR.ts @@ -720,7 +720,7 @@ Head: Circumference Full measurement name. - Cabeça: Cicunferência + Cabeça: Circunferência diff --git a/share/translations/valentina.ts b/share/translations/valentina.ts index a91302ef8..123eba70d 100644 --- a/share/translations/valentina.ts +++ b/share/translations/valentina.ts @@ -10364,11 +10364,11 @@ Do you want to save your changes? Height: - Height: + Height: Size: - Size: + Size: All files @@ -10534,6 +10534,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10930,10 +10938,6 @@ Do you want to save your changes? Seam allowance Seam allowance - - Automatic - - Width: Width: @@ -10984,7 +10988,7 @@ Do you want to save your changes? Custom - Custom + Custom Start point: @@ -11062,6 +11066,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + Custom + TabPins @@ -11077,6 +11091,13 @@ Do you want to save your changes? Dialog + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12568,7 +12589,7 @@ Do you want to save your changes? Angle - Angle + Angle by length @@ -12598,6 +12619,82 @@ Do you want to save your changes? Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + + + + Intersection + + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + + + + Two lines + + + + Three lines + + + + T mark + + + + V mark + + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15523,6 +15620,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_cs_CZ.ts b/share/translations/valentina_cs_CZ.ts index 3c154d0fb..9c5b24440 100644 --- a/share/translations/valentina_cs_CZ.ts +++ b/share/translations/valentina_cs_CZ.ts @@ -8184,10 +8184,6 @@ Chcete uložit své změny? Export recipe - - Hide main path - Skrýt hlavní cestu - Recipe files @@ -10153,11 +10149,11 @@ Chcete uložit změny? Height: - Výška: + Výška: Size: - Velikost: + Velikost: All files @@ -10323,6 +10319,14 @@ Chcete uložit změny? Cannot read settings from a malformed .INI file. Nelze číst nastavení z poškozeného souboru .INI. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10661,7 +10665,7 @@ Chcete uložit změny? Automatic - Automaticky + Automaticky Width: @@ -10713,7 +10717,7 @@ Chcete uložit změny? Custom - Vlastní + Vlastní Start point: @@ -10791,6 +10795,16 @@ Chcete uložit změny? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + Automaticky + + + Custom + seam allowance + Vlastní + TabPlaceLabels @@ -10799,6 +10813,13 @@ Chcete uložit změny? Dialog + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12246,7 +12267,7 @@ Chcete uložit změny? Angle - Úhel + Úhel by length @@ -12276,6 +12297,82 @@ Chcete uložit změny? Passmark Značka sestavení + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Přímo + + + Bisector + Osa + + + Intersection + Průsečík + + + Intersection (only left) + Průsečík (pouze levý) + + + Intersection (only right) + Průsečík (pouze pravý) + + + Intersection 2 + Průsečík 2 + + + Intersection 2 (only left) + Průsečík 2 (pouze levý) + + + Intersection 2 (only right) + Průsečík 2 (pouze pravý) + + + Passmark mark + + + + One line + Jedna čára + + + Two lines + Dvě čáry + + + Three lines + Tři čáry + + + T mark + Značka T + + + V mark + Značka V + + + V mark 2 + Značka V 2 + + + U mark + Značka U + + + Box mark + Značka okénko + VPE::VBoolProperty @@ -15164,6 +15261,13 @@ Chcete uložit změny? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_de_DE.ts b/share/translations/valentina_de_DE.ts index ec73164f4..b3c24469d 100644 --- a/share/translations/valentina_de_DE.ts +++ b/share/translations/valentina_de_DE.ts @@ -10121,11 +10121,11 @@ Do you want to save your changes? Height: - Höhe: + Höhe: Size: - Größe: + Größe: All files @@ -10291,6 +10291,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10627,10 +10635,6 @@ Do you want to save your changes? Seam allowance Schnittzugabe - - Automatic - - Width: Breite: @@ -10679,10 +10683,6 @@ Do you want to save your changes? Angle: Winkel: - - Custom - Benutzerdefiniert - Start point: @@ -10759,6 +10759,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + Benutzerdefiniert + TabPlaceLabels @@ -10767,6 +10777,13 @@ Do you want to save your changes? Dialog + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12194,7 +12211,7 @@ Do you want to save your changes? Angle - Winkel + Winkel by length @@ -12224,6 +12241,82 @@ Do you want to save your changes? Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Geradeaus + + + Bisector + Bisektor + + + Intersection + Überschneidung + + + Intersection (only left) + Überscheidung (nur links) + + + Intersection (only right) + Überschneidung (nur rechts) + + + Intersection 2 + Überschneidung 2 + + + Intersection 2 (only left) + Überschneidung 2 (nur links) + + + Intersection 2 (only right) + Überschneidung 2 (nur rechts) + + + Passmark mark + + + + One line + Eine Linie + + + Two lines + Zwei Linien + + + Three lines + Drei Linien + + + T mark + T Markierung + + + V mark + V Markierung + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15072,6 +15165,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_el_GR.ts b/share/translations/valentina_el_GR.ts index b0d1eca8d..97c5d760b 100644 --- a/share/translations/valentina_el_GR.ts +++ b/share/translations/valentina_el_GR.ts @@ -8057,10 +8057,6 @@ Do you want to save your changes? Export recipe - - Hide main path - Απόκρυψη κύριου μονοπατιού - Recipe files @@ -9920,11 +9916,11 @@ Do you want to save your changes? Height: - Ύψος: + Ύψος: Size: - Μέγεθος: + Μέγεθος: All files @@ -10090,6 +10086,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10426,10 +10430,6 @@ Do you want to save your changes? Seam allowance Περιθώριο ραφής - - Automatic - - Width: Φάρδος: @@ -10480,7 +10480,7 @@ Do you want to save your changes? Custom - Προσαρμογή + Προσαρμογή Start point: @@ -10558,6 +10558,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + Προσαρμογή + TabPlaceLabels @@ -10566,6 +10576,13 @@ Do you want to save your changes? Διάλογος + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -11840,7 +11857,7 @@ Do you want to save your changes? Angle - Γωνία + Γωνία by length @@ -11870,6 +11887,82 @@ Do you want to save your changes? Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + Διχοτόμος + + + Intersection + Διατομή + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + Μια γραμμή + + + Two lines + Δυο γραμμές + + + Three lines + Τρείς γραμμές + + + T mark + Σημάδι Τ + + + V mark + Σημάδι V + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -14660,6 +14753,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_en_CA.ts b/share/translations/valentina_en_CA.ts index c199c81b8..e97940e10 100644 --- a/share/translations/valentina_en_CA.ts +++ b/share/translations/valentina_en_CA.ts @@ -8180,10 +8180,6 @@ Do you want to save your changes? Export recipe - - Hide main path - Hide main path - Recipe files @@ -10148,11 +10144,11 @@ Do you want to save your changes? Height: - Height: + Height: Size: - Size: + Size: All files @@ -10318,6 +10314,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10656,7 +10660,7 @@ Do you want to save your changes? Automatic - Automatic + Automatic Width: @@ -10708,7 +10712,7 @@ Do you want to save your changes? Custom - Custom + Custom Start point: @@ -10786,6 +10790,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + Automatic + + + Custom + seam allowance + Custom + TabPlaceLabels @@ -10794,6 +10808,13 @@ Do you want to save your changes? Dialog + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12241,7 +12262,7 @@ Do you want to save your changes? Angle - Angle + Angle by length @@ -12271,6 +12292,82 @@ Do you want to save your changes? Passmark Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Straightforward + + + Bisector + Bisector + + + Intersection + Intersection + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + One line + + + Two lines + Two lines + + + Three lines + Three lines + + + T mark + T mark + + + V mark + V mark + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15159,6 +15256,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_en_IN.ts b/share/translations/valentina_en_IN.ts index 5c6c7919c..6acb5e7a9 100644 --- a/share/translations/valentina_en_IN.ts +++ b/share/translations/valentina_en_IN.ts @@ -8180,10 +8180,6 @@ Do you want to save your changes? Export recipe - - Hide main path - Hide main path - Recipe files @@ -10148,11 +10144,11 @@ Do you want to save your changes? Height: - Height: + Height: Size: - Size: + Size: All files @@ -10318,6 +10314,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10656,7 +10660,7 @@ Do you want to save your changes? Automatic - Automatic + Automatic Width: @@ -10708,7 +10712,7 @@ Do you want to save your changes? Custom - Custom + Custom Start point: @@ -10786,6 +10790,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + Automatic + + + Custom + seam allowance + Custom + TabPlaceLabels @@ -10794,6 +10808,13 @@ Do you want to save your changes? Dialog + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12241,7 +12262,7 @@ Do you want to save your changes? Angle - Angle + Angle by length @@ -12271,6 +12292,82 @@ Do you want to save your changes? Passmark Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Straightforward + + + Bisector + Bisector + + + Intersection + Intersection + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + One line + + + Two lines + Two lines + + + Three lines + Three lines + + + T mark + T mark + + + V mark + V mark + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15159,6 +15256,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_en_US.ts b/share/translations/valentina_en_US.ts index 28f0b74af..3cb082583 100644 --- a/share/translations/valentina_en_US.ts +++ b/share/translations/valentina_en_US.ts @@ -8180,10 +8180,6 @@ Do you want to save your changes? Export recipe - - Hide main path - Hide main path - Recipe files @@ -10148,11 +10144,11 @@ Do you want to save your changes? Height: - Height: + Height: Size: - Size: + Size: All files @@ -10318,6 +10314,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10656,7 +10660,7 @@ Do you want to save your changes? Automatic - Automatic + Automatic Width: @@ -10708,7 +10712,7 @@ Do you want to save your changes? Custom - Custom + Custom Start point: @@ -10786,6 +10790,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + Automatic + + + Custom + seam allowance + Custom + TabPlaceLabels @@ -10794,6 +10808,13 @@ Do you want to save your changes? Dialog + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12241,7 +12262,7 @@ Do you want to save your changes? Angle - Angle + Angle by length @@ -12271,6 +12292,82 @@ Do you want to save your changes? Passmark Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Straightforward + + + Bisector + Bisector + + + Intersection + Intersection + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + One line + + + Two lines + Two lines + + + Three lines + Three lines + + + T mark + T mark + + + V mark + V mark + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15159,6 +15256,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_es_ES.ts b/share/translations/valentina_es_ES.ts index b3d64accf..45696df64 100644 --- a/share/translations/valentina_es_ES.ts +++ b/share/translations/valentina_es_ES.ts @@ -8182,10 +8182,6 @@ el patrón. Export recipe - - Hide main path - Ocultar ruta principal - Recipe files @@ -10151,11 +10147,11 @@ Quieres guardar los cambios? Height: - Altura: + Altura: Size: - Talla: + Talla: All files @@ -10321,6 +10317,14 @@ Quieres guardar los cambios? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10659,7 +10663,7 @@ Quieres guardar los cambios? Automatic - Automático + Automático Width: @@ -10711,7 +10715,7 @@ Quieres guardar los cambios? Custom - Cliente + Cliente Start point: @@ -10789,6 +10793,16 @@ Quieres guardar los cambios? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + Automático + + + Custom + seam allowance + + TabPlaceLabels @@ -10797,6 +10811,13 @@ Quieres guardar los cambios? Dialogo + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12244,7 +12265,7 @@ Quieres guardar los cambios? Angle - Angulo + Angulo by length @@ -12274,6 +12295,82 @@ Quieres guardar los cambios? Passmark Pique + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + Bisector + + + Intersection + Interseccion + + + Intersection (only left) + Intersección (solamente izquierdo) + + + Intersection (only right) + Intersección (solamente derecho) + + + Intersection 2 + Intersección 2 + + + Intersection 2 (only left) + Intersección 2 ( solamente izquierdo) + + + Intersection 2 (only right) + Intersección 2 ( solamente derecho) + + + Passmark mark + + + + One line + Una linea + + + Two lines + Dos lineas + + + Three lines + Tres lineas + + + T mark + Marca T + + + V mark + Marca V + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15162,6 +15259,13 @@ Quieres guardar los cambios? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_fi_FI.ts b/share/translations/valentina_fi_FI.ts index a627de69d..5d75c9a17 100644 --- a/share/translations/valentina_fi_FI.ts +++ b/share/translations/valentina_fi_FI.ts @@ -8978,14 +8978,6 @@ Do you want to save your changes? Customer's email address - - Height: - Korkeus: - - - Size: - - All files @@ -9150,6 +9142,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -9486,10 +9486,6 @@ Do you want to save your changes? Seam allowance Saumavara - - Automatic - - Width: Leveys: @@ -9538,10 +9534,6 @@ Do you want to save your changes? Angle: - - Custom - - Start point: @@ -9618,6 +9610,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + + TabPlaceLabels @@ -9626,6 +9628,13 @@ Do you want to save your changes? + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -10894,7 +10903,7 @@ Do you want to save your changes? Angle - Kulma + Kulma by length @@ -10924,6 +10933,82 @@ Do you want to save your changes? Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + + + + Intersection + + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + + + + Two lines + + + + Three lines + + + + T mark + + + + V mark + + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -13618,6 +13703,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_fr_FR.ts b/share/translations/valentina_fr_FR.ts index 49353e657..17eb18218 100644 --- a/share/translations/valentina_fr_FR.ts +++ b/share/translations/valentina_fr_FR.ts @@ -10129,11 +10129,11 @@ Voulez-vous enregistrer les changements? Height: - Stature: + Stature: Size: - Taille : + Taille : All files @@ -10299,6 +10299,14 @@ Voulez-vous enregistrer les changements? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10635,10 +10643,6 @@ Voulez-vous enregistrer les changements? Seam allowance Marge de couture - - Automatic - - Width: Largeur : @@ -10687,10 +10691,6 @@ Voulez-vous enregistrer les changements? Angle: Angle: - - Custom - Personnalisé - Start point: @@ -10767,6 +10767,16 @@ Voulez-vous enregistrer les changements? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + Personnalisé + TabPlaceLabels @@ -10775,6 +10785,13 @@ Voulez-vous enregistrer les changements? Dialogue + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12213,7 +12230,7 @@ Voulez-vous enregistrer les changements? Angle - Angle + Angle by length @@ -12243,6 +12260,82 @@ Voulez-vous enregistrer les changements? Passmark Repère de montage + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + + + + Intersection + + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + Un trait + + + Two lines + Deux traits + + + Three lines + Trois traits + + + T mark + Marque T + + + V mark + Marque V + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15119,6 +15212,13 @@ Voulez-vous enregistrer les changements? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_he_IL.ts b/share/translations/valentina_he_IL.ts index f9c0e5fe9..70c3c235c 100644 --- a/share/translations/valentina_he_IL.ts +++ b/share/translations/valentina_he_IL.ts @@ -7905,14 +7905,6 @@ Do you want to save your changes? Customer's email address - - Height: - - - - Size: - - All files @@ -8077,6 +8069,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -8413,10 +8413,6 @@ Do you want to save your changes? Seam allowance - - Automatic - - Width: @@ -8465,10 +8461,6 @@ Do you want to save your changes? Angle: - - Custom - - Start point: @@ -8545,6 +8537,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + + TabPlaceLabels @@ -8553,6 +8555,13 @@ Do you want to save your changes? + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapePreferencesConfigurationPage @@ -9664,10 +9673,6 @@ Do you want to save your changes? Force flipping - - Angle - - by length @@ -9696,6 +9701,82 @@ Do you want to save your changes? Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + + + + Intersection + + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + + + + Two lines + + + + Three lines + + + + T mark + + + + V mark + + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -12234,6 +12315,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_id_ID.ts b/share/translations/valentina_id_ID.ts index b22a40445..88c68aaab 100644 --- a/share/translations/valentina_id_ID.ts +++ b/share/translations/valentina_id_ID.ts @@ -8243,14 +8243,6 @@ Do you want to save your changes? Customer's email address - - Height: - - - - Size: - - All files @@ -8415,6 +8407,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -8751,10 +8751,6 @@ Do you want to save your changes? Seam allowance kampuh - - Automatic - - Width: @@ -8803,10 +8799,6 @@ Do you want to save your changes? Angle: - - Custom - - Start point: @@ -8883,6 +8875,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + + TabPlaceLabels @@ -8891,6 +8893,13 @@ Do you want to save your changes? + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -10050,7 +10059,7 @@ Do you want to save your changes? Angle - sudut + sudut by length @@ -10080,6 +10089,82 @@ Do you want to save your changes? Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + + + + Intersection + + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + + + + Two lines + + + + Three lines + + + + T mark + + + + V mark + + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -12635,6 +12720,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_it_IT.ts b/share/translations/valentina_it_IT.ts index 14925e91e..369a8fd7d 100644 --- a/share/translations/valentina_it_IT.ts +++ b/share/translations/valentina_it_IT.ts @@ -8146,10 +8146,6 @@ Vuoi salvare i cambiamenti? Export recipe - - Hide main path - Nascondi percorso primario - Recipe files @@ -10115,11 +10111,11 @@ Vuoi salvare le tue modifiche? Height: - Altezza: + Altezza: Size: - Taglia: + Taglia: All files @@ -10285,6 +10281,14 @@ Vuoi salvare le tue modifiche? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10623,7 +10627,7 @@ Vuoi salvare le tue modifiche? Automatic - Automaticoc + Automaticoc Width: @@ -10673,10 +10677,6 @@ Vuoi salvare le tue modifiche? Angle: Angolo: - - Custom - Personalizzato - Start point: Punto di inizio: @@ -10753,6 +10753,16 @@ Vuoi salvare le tue modifiche? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + Automaticoc + + + Custom + seam allowance + Personalizzato + TabPlaceLabels @@ -10761,6 +10771,13 @@ Vuoi salvare le tue modifiche? Finestra + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12147,7 +12164,7 @@ Vuoi salvare le tue modifiche? Angle - Angol + Angol by length @@ -12177,6 +12194,82 @@ Vuoi salvare le tue modifiche? Passmark Tacca + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Dritta + + + Bisector + Bisettrice + + + Intersection + Intersezione + + + Intersection (only left) + Intersezione (sinistra) + + + Intersection (only right) + Intersezione (destra) + + + Intersection 2 + Intersezione 2 + + + Intersection 2 (only left) + Intersezione 2 (solo sinistra) + + + Intersection 2 (only right) + Intersezione 2 (solo destra) + + + Passmark mark + + + + One line + Una linea + + + Two lines + Due linee + + + Three lines + Tre linee + + + T mark + Tacca a T + + + V mark + Tacca a V + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15000,6 +15093,13 @@ Vuoi salvare le tue modifiche? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_nl_NL.ts b/share/translations/valentina_nl_NL.ts index 6fc6c036a..d241d112d 100644 --- a/share/translations/valentina_nl_NL.ts +++ b/share/translations/valentina_nl_NL.ts @@ -8181,10 +8181,6 @@ Do you want to save your changes? Export recipe - - Hide main path - Verberg hoofdpad - Recipe files @@ -10149,11 +10145,11 @@ Wil je deze veranderingen opslaan? Height: - Hoogte: + Hoogte: Size: - Maat: + Maat: All files @@ -10319,6 +10315,14 @@ Wil je deze veranderingen opslaan? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10657,7 +10661,7 @@ Wil je deze veranderingen opslaan? Automatic - Automatisch + Automatisch Width: @@ -10709,7 +10713,7 @@ Wil je deze veranderingen opslaan? Custom - Op maat + Op maat Start point: @@ -10787,6 +10791,16 @@ Wil je deze veranderingen opslaan? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + Automatisch + + + Custom + seam allowance + Op maat + TabPlaceLabels @@ -10795,6 +10809,13 @@ Wil je deze veranderingen opslaan? Dialoog + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12242,7 +12263,7 @@ Wil je deze veranderingen opslaan? Angle - Hoek + Hoek by length @@ -12272,6 +12293,82 @@ Wil je deze veranderingen opslaan? Passmark Pasmarkering + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Rechttoe rechtaan + + + Bisector + Bisector + + + Intersection + Kruispunt van lijnen + + + Intersection (only left) + Kruispunt ( alleen links) + + + Intersection (only right) + Kruispunt ( alleen rechts) + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + Een lijn + + + Two lines + Twee lijnen + + + Three lines + Drie lijnen + + + T mark + T markering + + + V mark + V markering + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15160,6 +15257,13 @@ Wil je deze veranderingen opslaan? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_pl_PL.ts b/share/translations/valentina_pl_PL.ts index ca08edfbe..7a507b0f8 100644 --- a/share/translations/valentina_pl_PL.ts +++ b/share/translations/valentina_pl_PL.ts @@ -9118,11 +9118,11 @@ Do you want to save your changes? Height: - Wysokość: + Wysokość: Size: - Rozmiar: + Rozmiar: All files @@ -9288,6 +9288,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -9624,10 +9632,6 @@ Do you want to save your changes? Seam allowance Dodatek na szew - - Automatic - - Width: Szerokość: @@ -9676,10 +9680,6 @@ Do you want to save your changes? Angle: Kąt: - - Custom - - Start point: Punkt początkowy: @@ -9756,6 +9756,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + + TabPlaceLabels @@ -9764,6 +9774,13 @@ Do you want to save your changes? Wartość pierwszego kąta + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -11026,7 +11043,7 @@ Do you want to save your changes? Angle - Kąt + Kąt by length @@ -11056,6 +11073,82 @@ Do you want to save your changes? Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + + + + Intersection + + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + + + + Two lines + + + + Three lines + + + + T mark + + + + V mark + + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -13713,6 +13806,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_pt_BR.ts b/share/translations/valentina_pt_BR.ts index 9a6419222..1ca492589 100644 --- a/share/translations/valentina_pt_BR.ts +++ b/share/translations/valentina_pt_BR.ts @@ -8174,10 +8174,6 @@ Você quer salvar suas mudanças? Export recipe - - Hide main path - Ocultar caminho principal - Recipe files @@ -10131,11 +10127,11 @@ Deseja salvar suas mudanças? Height: - Altura: + Altura: Size: - Tamanho: + Tamanho: All files @@ -10301,6 +10297,14 @@ Deseja salvar suas mudanças? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10639,7 +10643,7 @@ Deseja salvar suas mudanças? Automatic - Automático + Automático Width: @@ -10691,7 +10695,7 @@ Deseja salvar suas mudanças? Custom - Personalizado + Personalizado Start point: @@ -10769,6 +10773,16 @@ Deseja salvar suas mudanças? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + Automático + + + Custom + seam allowance + Personalizado + TabPlaceLabels @@ -10777,6 +10791,13 @@ Deseja salvar suas mudanças? Caixa de diálogo + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12176,7 +12197,7 @@ Deseja salvar suas mudanças? Angle - Ângulo + Ângulo by length @@ -12206,6 +12227,82 @@ Deseja salvar suas mudanças? Passmark Pique + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Reto + + + Bisector + Bissetriz + + + Intersection + Interseção + + + Intersection (only left) + Interseção (apenas à esquerda) + + + Intersection (only right) + Interseção (apenas à direita) + + + Intersection 2 + Interseção 2 + + + Intersection 2 (only left) + Interseção 2 (apenas à esquerda) + + + Intersection 2 (only right) + Interseção 2 (apenas à direita) + + + Passmark mark + + + + One line + Uma linha + + + Two lines + Duas linhas + + + Three lines + Três linhas + + + T mark + Marca T + + + V mark + Marca V + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15049,6 +15146,13 @@ Deseja salvar suas mudanças? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_ro_RO.ts b/share/translations/valentina_ro_RO.ts index 6db3dea3e..65a3ee179 100644 --- a/share/translations/valentina_ro_RO.ts +++ b/share/translations/valentina_ro_RO.ts @@ -8941,14 +8941,6 @@ Do you want to save your changes? Customer's email address - - Height: - Înălțime: - - - Size: - - All files @@ -9113,6 +9105,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -9449,10 +9449,6 @@ Do you want to save your changes? Seam allowance Adaos cusatură - - Automatic - - Width: Lățime: @@ -9501,10 +9497,6 @@ Do you want to save your changes? Angle: Unghi: - - Custom - - Start point: @@ -9581,6 +9573,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + + TabPlaceLabels @@ -9589,6 +9591,13 @@ Do you want to save your changes? Dialog + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -10787,7 +10796,7 @@ Do you want to save your changes? Angle - Unghi + Unghi by length @@ -10817,6 +10826,82 @@ Do you want to save your changes? Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + + + + Intersection + + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + + + + Two lines + + + + Three lines + + + + T mark + + + + V mark + + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -13419,6 +13504,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_ru_RU.ts b/share/translations/valentina_ru_RU.ts index 1730455a9..e3eee2c1a 100644 --- a/share/translations/valentina_ru_RU.ts +++ b/share/translations/valentina_ru_RU.ts @@ -2749,7 +2749,7 @@ Rotate objects around point %1. Suffix '%2' - + Поворот объектов вокруг точки %1. Суффикс '%2' Flipping by line %1_%2. Suffix '%3' @@ -2761,7 +2761,7 @@ Move objects. Suffix '%1' - + Переместить объекты. Суффикс '%1' @@ -4680,7 +4680,7 @@ Apply settings anyway? V mark 2 - + V метка 2 Select main path objects, <b>%1</b> - reverse direction curve, <b>%2</b> - finish creation @@ -4700,11 +4700,11 @@ Apply settings anyway? U mark - + U метка Box mark - + П метка Edit passmark length @@ -8183,21 +8183,17 @@ Do you want to save your changes? Export recipe Экспортировать рецепт - - Hide main path - Прятать главный контур - Recipe files - + Файлы рецептов recipe - + рецепт Could not save recipe. %1 - + Не удалось сохранить рецепт. %1 Curved path tool which uses point as control handle @@ -8205,11 +8201,11 @@ Do you want to save your changes? Point of intersection arc and axis - + Точка пересечения дуги и оси Show main path - + Показать основной контур Globally show pieces main path @@ -8380,7 +8376,7 @@ Do you want to save your changes? Timeout. - + Закончилось время. Cannot set printer page size @@ -9187,7 +9183,7 @@ This option will take an affect after restart. Piece '%1'. Not enough points to build seam allowance. - + Деталь '%1'. Недостаточно точек, чтобы построить припуск на шов. Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -9207,7 +9203,7 @@ This option will take an affect after restart. Empty formula - + Пустая формула Invalid result. Value is infinite or NaN. Please, check your calculations. @@ -9231,7 +9227,7 @@ This option will take an affect after restart. Piece '%1'. Seam allowance is not valid. - + Деталь '%1'. Припуски на швы неправильные. Found null notch for point '%1' in piece '%2'. Length is less than minimal allowed. @@ -9239,7 +9235,7 @@ This option will take an affect after restart. Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. - + Невозможно вычислить длину надсечки у точки '%1' в детали '%2' со встроенным припуском на шов. Пользователь должен вручную указать длину. Cannot calculate seam allowance before for point '%1'. Reason: %2. @@ -10152,11 +10148,11 @@ Do you want to save your changes? Height: - Рост: + Рост: Size: - Размер: + Размер: All files @@ -10276,7 +10272,7 @@ Do you want to save your changes? &Window - + &Окно &Help @@ -10284,11 +10280,11 @@ Do you want to save your changes? &Measurements - + &Мерки &Open individual … - + &Открыть индивидуальные … &Save @@ -10296,7 +10292,7 @@ Do you want to save your changes? Save &As … - + Сохранить &как … &Quit @@ -10304,7 +10300,7 @@ Do you want to save your changes? &About Tape - + &О Tape &New @@ -10322,6 +10318,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10593,7 +10597,7 @@ Do you want to save your changes? V mark 2 - + V метка 2 Manual length @@ -10625,11 +10629,11 @@ Do you want to save your changes? U mark - + U метка Box mark - + П метка @@ -10660,7 +10664,7 @@ Do you want to save your changes? Automatic - Автоматическая + Автоматическая Width: @@ -10712,7 +10716,7 @@ Do you want to save your changes? Custom - Пользовательская + Пользовательская Start point: @@ -10788,6 +10792,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + Управление приоритетом в раскладке. 0 - нет приоритета. + + + Automatic + seam allowance + Автоматическая + + + Custom + seam allowance @@ -10798,6 +10812,13 @@ Do you want to save your changes? Диалог + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -11885,7 +11906,7 @@ Do you want to save your changes? Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + Переключить ориентацию шаблона страницы в альбомную ориентацию (режим экспорта). Этот параметр действует только для одного из предварительно определенных шаблонов страниц. The page height @@ -11897,7 +11918,7 @@ Do you want to save your changes? <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + <Time>в минутах, приведенных для алгоритма, чтобы найти лучшую раскладку. Время должно быть в диапазоне от 1 минуты до 60 минут. Значение по умолчанию 1 минута. Time @@ -11911,10 +11932,6 @@ Do you want to save your changes? Time must be in range from 1 minute to 60 minutes. Время должно быть в диапазоне от 1 минуты до 60 минут. - - Сoefficient must be in range from 0 to 100. - Коэффициент должен быть в диапазоне от 0 до 100. - Follow manual priority over priority by square (export mode). @@ -11929,7 +11946,7 @@ Do you want to save your changes? Coefficient must be in range from 0 to 100. - + Коэффициент должен быть в диапазоне от 0 до 100. @@ -12249,7 +12266,7 @@ Do you want to save your changes? Angle - Угол + Угол by length @@ -12279,6 +12296,82 @@ Do you want to save your changes? Passmark Надсечка + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Прямой + + + Bisector + Биссектриса + + + Intersection + Пересечение + + + Intersection (only left) + Пересечение (только слева) + + + Intersection (only right) + Пересечение (только справа) + + + Intersection 2 + Пересечение 2 + + + Intersection 2 (only left) + Пересечение 2 (только слева) + + + Intersection 2 (only right) + Пересечение 2 (только справа) + + + Passmark mark + + + + One line + Одна линия + + + Two lines + Две линии + + + Three lines + Три линии + + + T mark + Т метка + + + V mark + V метка + + + V mark 2 + V метка 2 + + + U mark + U метка + + + Box mark + П метка + VPE::VBoolProperty @@ -15138,7 +15231,7 @@ Do you want to save your changes? Hide not in layout - + Скрыть не в раскладке @@ -15172,6 +15265,13 @@ Do you want to save your changes? Показать все + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_uk_UA.ts b/share/translations/valentina_uk_UA.ts index 4539bffad..fd0286692 100644 --- a/share/translations/valentina_uk_UA.ts +++ b/share/translations/valentina_uk_UA.ts @@ -8181,10 +8181,6 @@ Do you want to save your changes? Export recipe - - Hide main path - Ховати головний контур - Recipe files @@ -10149,11 +10145,11 @@ Do you want to save your changes? Height: - Висота: + Висота: Size: - Розмір: + Розмір: All files @@ -10319,6 +10315,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -10657,7 +10661,7 @@ Do you want to save your changes? Automatic - Автоматична + Автоматична Width: @@ -10709,7 +10713,7 @@ Do you want to save your changes? Custom - Користувацька + Користувацька Start point: @@ -10787,6 +10791,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + Автоматична + + + Custom + seam allowance + + TabPlaceLabels @@ -10795,6 +10809,13 @@ Do you want to save your changes? Діалог + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -12241,7 +12262,7 @@ Do you want to save your changes? Angle - Кут + Кут by length @@ -12271,6 +12292,82 @@ Do you want to save your changes? Passmark Надсічка + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + Пряма + + + Bisector + Бісектриса + + + Intersection + Перетин + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + Одна лінія + + + Two lines + Дві лінії + + + Three lines + Три лінії + + + T mark + Т позначка + + + V mark + V позначка + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -15159,6 +15256,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath diff --git a/share/translations/valentina_zh_CN.ts b/share/translations/valentina_zh_CN.ts index 4ae322ebb..9d1d869f8 100644 --- a/share/translations/valentina_zh_CN.ts +++ b/share/translations/valentina_zh_CN.ts @@ -8019,14 +8019,6 @@ Do you want to save your changes? Customer's email address - - Height: - - - - Size: - - All files @@ -8191,6 +8183,14 @@ Do you want to save your changes? Cannot read settings from a malformed .INI file. + + Height (%1): + + + + Size (%1): + + TabGrainline @@ -8527,10 +8527,6 @@ Do you want to save your changes? Seam allowance - - Automatic - - Width: 宽度: @@ -8579,10 +8575,6 @@ Do you want to save your changes? Angle: - - Custom - - Start point: @@ -8659,6 +8651,16 @@ Do you want to save your changes? Controls priority in layout. 0 - no priority. + + Automatic + seam allowance + + + + Custom + seam allowance + + TabPlaceLabels @@ -8667,6 +8669,13 @@ Do you want to save your changes? + + Tape + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Tape please update to newer test build. The application will be shut down. + + + TapeConfigDialog @@ -9835,10 +9844,6 @@ Do you want to save your changes? Force flipping - - Angle - - by length @@ -9867,6 +9872,82 @@ Do you want to save your changes? Passmark + + Seam allowance angle + + + + Passmark angle + + + + Straightforward + + + + Bisector + + + + Intersection + + + + Intersection (only left) + + + + Intersection (only right) + + + + Intersection 2 + + + + Intersection 2 (only left) + + + + Intersection 2 (only right) + + + + Passmark mark + + + + One line + + + + Two lines + + + + Three lines + + + + T mark + + + + V mark + + + + V mark 2 + + + + U mark + + + + Box mark + + VPE::VBoolProperty @@ -12401,6 +12482,13 @@ Do you want to save your changes? + + Valentina + + This test build is older than %1 days. To provide you with better quality service we restrict the lifetime you can use a test build. To continue using Valentina please update to newer test build. The application will be shut down. + + + VisToolCubicBezierPath