Commit successful build.

--HG--
branch : feature
This commit is contained in:
Roman Telezhynskyi 2016-05-12 22:11:21 +03:00
parent 2717382d71
commit 910c40a5b3
41 changed files with 2681 additions and 76 deletions

View File

@ -74,7 +74,7 @@ void VToolOptionsPropertyBrowser::ClearPropertyBrowser()
void VToolOptionsPropertyBrowser::ShowItemOptions(QGraphicsItem *item)
{
// This check helps to find missed tools in the switch
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 42, "Not all tools was used in switch.");
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 43, "Not all tools was used in switch.");
switch (item->type())
{
@ -177,6 +177,9 @@ void VToolOptionsPropertyBrowser::ShowItemOptions(QGraphicsItem *item)
case VToolTrueDarts::Type:
ShowOptionsToolTrueDarts(item);
break;
case VToolRotation::Type:
ShowOptionsToolRotation(item);
break;
default:
break;
}
@ -191,7 +194,7 @@ void VToolOptionsPropertyBrowser::UpdateOptions()
}
// This check helps to find missed tools in the switch
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 42, "Not all tools was used in switch.");
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 43, "Not all tools was used in switch.");
switch (currentItem->type())
{
@ -288,6 +291,9 @@ void VToolOptionsPropertyBrowser::UpdateOptions()
case VToolTrueDarts::Type:
UpdateOptionsToolTrueDarts();
break;
case VToolRotation::Type:
UpdateOptionsToolRotation();
break;
default:
break;
}
@ -323,7 +329,7 @@ void VToolOptionsPropertyBrowser::userChangedData(VProperty *property)
}
// This check helps to find missed tools in the switch
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 42, "Not all tools was used in switch.");
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 43, "Not all tools was used in switch.");
switch (currentItem->type())
{
@ -414,6 +420,9 @@ void VToolOptionsPropertyBrowser::userChangedData(VProperty *property)
case VToolTrueDarts::Type:
ChangeDataToolTrueDarts(prop);
break;
case VToolRotation::Type:
ChangeDataToolRotation(prop);
break;
default:
break;
}
@ -1525,6 +1534,12 @@ void VToolOptionsPropertyBrowser::ChangeDataToolCurveIntersectAxis(VProperty *pr
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolOptionsPropertyBrowser::ChangeDataToolRotation(VProperty *property)
{
SCASSERT(property != nullptr)
}
//---------------------------------------------------------------------------------------------------------------------
void VToolOptionsPropertyBrowser::ShowOptionsToolSinglePoint(QGraphicsItem *item)
{
@ -1907,6 +1922,12 @@ void VToolOptionsPropertyBrowser::ShowOptionsToolCurveIntersectAxis(QGraphicsIte
AddPropertyFormula(tr("Angle"), i->GetFormulaAngle(), AttrAngle);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolOptionsPropertyBrowser::ShowOptionsToolRotation(QGraphicsItem *item)
{
}
//---------------------------------------------------------------------------------------------------------------------
void VToolOptionsPropertyBrowser::UpdateOptionsToolSinglePoint()
{
@ -2365,6 +2386,12 @@ void VToolOptionsPropertyBrowser::UpdateOptionsToolCurveIntersectAxis()
idToProperty[AttrAngle]->setValue(valueAngle);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolOptionsPropertyBrowser::UpdateOptionsToolRotation()
{
}
//---------------------------------------------------------------------------------------------------------------------
QStringList VToolOptionsPropertyBrowser::PropertiesList() const
{

View File

@ -144,6 +144,7 @@ private:
void ChangeDataToolTriangle(VPE::VProperty *property);
void ChangeDataToolLineIntersectAxis(VPE::VProperty *property);
void ChangeDataToolCurveIntersectAxis(VPE::VProperty *property);
void ChangeDataToolRotation(VPE::VProperty *property);
void ShowOptionsToolSinglePoint(QGraphicsItem *item);
void ShowOptionsToolEndLine(QGraphicsItem *item);
@ -174,6 +175,7 @@ private:
void ShowOptionsToolTriangle(QGraphicsItem *item);
void ShowOptionsToolLineIntersectAxis(QGraphicsItem *item);
void ShowOptionsToolCurveIntersectAxis(QGraphicsItem *item);
void ShowOptionsToolRotation(QGraphicsItem *item);
void UpdateOptionsToolSinglePoint();
void UpdateOptionsToolEndLine();
@ -204,6 +206,7 @@ private:
void UpdateOptionsToolTriangle();
void UpdateOptionsToolLineIntersectAxis();
void UpdateOptionsToolCurveIntersectAxis();
void UpdateOptionsToolRotation();
};
#endif // VTOOLOPTIONSPROPERTYBROWSER_H

View File

@ -208,7 +208,7 @@ void DialogHistory::FillTable()
QString DialogHistory::Record(const VToolRecord &tool)
{
// This check helps to find missed tools in the switch
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 42, "Not all tools was used in history.");
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 43, "Not all tools was used in history.");
const QDomElement domElem = doc->elementById(tool.getId());
if (domElem.isElement() == false)
@ -384,6 +384,7 @@ QString DialogHistory::Record(const VToolRecord &tool)
case Tool::NodeSpline:
case Tool::NodeSplinePath:
case Tool::Group:
case Tool::Rotation:
return QString();
}
}

View File

@ -613,6 +613,7 @@ void MainWindow::SetToolButtonWithApply(bool checked, Tool t, const QString &cur
SCASSERT(scene != nullptr);
connect(scene, &VMainGraphicsScene::ChoosedObject, dialogTool, &DialogTool::ChosenObject);
connect(scene, &VMainGraphicsScene::SelectedObject, dialogTool, &DialogTool::SelectedObject);
connect(dialogTool, &DialogTool::DialogClosed, this, closeDialogSlot);
connect(dialogTool, &DialogTool::DialogApplied, this, applyDialogSlot);
connect(dialogTool, &DialogTool::ToolTip, this, &MainWindow::ShowToolTip);
@ -1004,12 +1005,22 @@ void MainWindow::ClosedDialogUnionDetails(int result)
void MainWindow::ToolGroup(bool checked)
{
ToolSelectGroupObjects();
currentScene->clearSelection();
SetToolButton<DialogGroup>(checked, Tool::Group, ":/cursor/group_plus_cursor.png",
tr("Select one or more objects, <b>Enter</b> - finish creation"),
&MainWindow::ClosedDialogGroup);
}
//---------------------------------------------------------------------------------------------------------------------
void MainWindow::ToolRotation(bool checked)
{
ToolSelectGroupObjects();
SetToolButtonWithApply<DialogRotation>(checked, Tool::Rotation,
":/cursor/rotation_cursor.png",
tr("Select one or more objects, <b>Enter</b> - confirm selection"),
&MainWindow::ClosedDialogWithApply<VToolRotation>,
&MainWindow::ApplyDialog<VToolRotation>);
}
//---------------------------------------------------------------------------------------------------------------------
void MainWindow::ClosedDialogGroup(int result)
{
@ -1740,6 +1751,7 @@ void MainWindow::InitToolButtons()
connect(ui->toolButtonArcWithLength, &QToolButton::clicked, this, &MainWindow::ToolArcWithLength);
connect(ui->toolButtonTrueDarts, &QToolButton::clicked, this, &MainWindow::ToolTrueDarts);
connect(ui->toolButtonGroup, &QToolButton::clicked, this, &MainWindow::ToolGroup);
connect(ui->toolButtonRotation, &QToolButton::clicked, this, &MainWindow::ToolRotation);
}
//---------------------------------------------------------------------------------------------------------------------
@ -1780,12 +1792,16 @@ void MainWindow::mouseMove(const QPointF &scenePos)
void MainWindow::CancelTool()
{
// This check helps to find missed tools in the switch
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 42, "Not all tools was handled.");
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 43, "Not all tools was handled.");
qCDebug(vMainWindow, "Canceling tool.");
delete dialogTool;
dialogTool = nullptr;
qCDebug(vMainWindow, "Dialog closed.");
currentScene->setFocus(Qt::OtherFocusReason);
currentScene->clearSelection();
switch ( currentTool )
{
case Tool::Arrow:
@ -1907,9 +1923,10 @@ void MainWindow::CancelTool()
case Tool::Group:
ui->toolButtonGroup->setChecked(false);
break;
case Tool::Rotation:
ui->toolButtonRotation->setChecked(false);
break;
}
currentScene->setFocus(Qt::OtherFocusReason);
currentScene->clearSelection();
// Crash: using CRTL+Z while using line tool.
// related bug report:
@ -3110,6 +3127,7 @@ void MainWindow::SetEnableTool(bool enable)
ui->toolButtonArcWithLength->setEnabled(drawTools);
ui->toolButtonTrueDarts->setEnabled(drawTools);
ui->toolButtonGroup->setEnabled(drawTools);
ui->toolButtonRotation->setEnabled(drawTools);
ui->actionLast_tool->setEnabled(drawTools);
@ -3380,7 +3398,7 @@ void MainWindow::CreateMenus()
void MainWindow::LastUsedTool()
{
// This check helps to find missed tools in the switch
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 42, "Not all tools was handled.");
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 43, "Not all tools was handled.");
if (currentTool == lastUsedTool)
{
@ -3531,6 +3549,10 @@ void MainWindow::LastUsedTool()
ui->toolButtonGroup->setChecked(true);
ToolGroup(true);
break;
case Tool::Rotation:
ui->toolButtonRotation->setChecked(true);
ToolRotation(true);
break;
}
}
@ -4715,12 +4737,12 @@ void MainWindow::ToolSelectAllDrawObjects() const
}
//---------------------------------------------------------------------------------------------------------------------
void MainWindow::ToolSelectGroupObjects() const
void MainWindow::ToolSelectOperationObjects() const
{
// Only true for rubber band selection
emit EnableLabelSelection(true);
emit EnablePointSelection(true);
emit EnableLineSelection(true);
emit EnableLineSelection(false);
emit EnableArcSelection(true);
emit EnableSplineSelection(true);
emit EnableSplinePathSelection(true);
@ -4728,7 +4750,7 @@ void MainWindow::ToolSelectGroupObjects() const
// Hovering
emit EnableLabelHover(true);
emit EnablePointHover(true);
emit EnableLineHover(true);
emit EnableLineHover(false);
emit EnableArcHover(true);
emit EnableSplineHover(true);
emit EnableSplinePathHover(true);
@ -4738,6 +4760,17 @@ void MainWindow::ToolSelectGroupObjects() const
ui->view->AllowRubberBand(true);
}
//---------------------------------------------------------------------------------------------------------------------
void MainWindow::ToolSelectGroupObjects() const
{
ToolSelectOperationObjects();
// Only true for rubber band selection
emit EnableLineSelection(true);
// Hovering
emit EnableLineHover(true);
}
//---------------------------------------------------------------------------------------------------------------------
void MainWindow::ToolSelectDetail() const
{

View File

@ -122,6 +122,7 @@ public slots:
void ToolPointOfIntersection(bool checked);
void ToolUnionDetails(bool checked);
void ToolGroup(bool checked);
void ToolRotation(bool checked);
void ToolCutArc(bool checked);
void ToolLineIntersectAxis(bool checked);
void ToolCurveIntersectAxis(bool checked);
@ -372,6 +373,7 @@ private:
void ToolSelectPointArc() const;
void ToolSelectCurve() const;
void ToolSelectAllDrawObjects() const;
void ToolSelectOperationObjects() const;
void ToolSelectGroupObjects() const;
void ToolSelectDetail() const;
};

View File

@ -983,6 +983,32 @@
</property>
</widget>
</item>
<item row="0" column="1">
<widget class="QToolButton" name="toolButtonRotation">
<property name="enabled">
<bool>false</bool>
</property>
<property name="toolTip">
<string>Rotate objects</string>
</property>
<property name="text">
<string notr="true">...</string>
</property>
<property name="icon">
<iconset resource="share/resources/toolicon.qrc">
<normaloff>:/toolicon/32x32/rotation.png</normaloff>:/toolicon/32x32/rotation.png</iconset>
</property>
<property name="iconSize">
<size>
<width>32</width>
<height>32</height>
</size>
</property>
<property name="checkable">
<bool>true</bool>
</property>
</widget>
</item>
</layout>
</widget>
<widget class="QWidget" name="page_5">

View File

@ -66,5 +66,7 @@
<file>cursor/cubic_bezier_path_cursor@2x.png</file>
<file>cursor/group_plus_cursor.png</file>
<file>cursor/group_plus_cursor@2x.png</file>
<file>cursor/rotation_cursor.png</file>
<file>cursor/rotation_cursor@2x.png</file>
</qresource>
</RCC>

Binary file not shown.

After

Width:  |  Height:  |  Size: 836 B

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.7 KiB

View File

@ -64,5 +64,7 @@
<file>toolicon/32x32/cubic_bezier_path@2x.png</file>
<file>toolicon/32x32/group_plus.png</file>
<file>toolicon/32x32/group_plus@2x.png</file>
<file>toolicon/32x32/rotation.png</file>
<file>toolicon/32x32/rotation@2x.png</file>
</qresource>
</RCC>

Binary file not shown.

After

Width:  |  Height:  |  Size: 1.3 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 2.7 KiB

View File

@ -0,0 +1,82 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Created with Inkscape (http://www.inkscape.org/) -->
<svg
xmlns:dc="http://purl.org/dc/elements/1.1/"
xmlns:cc="http://creativecommons.org/ns#"
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
xmlns:svg="http://www.w3.org/2000/svg"
xmlns="http://www.w3.org/2000/svg"
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
width="64mm"
height="64mm"
viewBox="0 0 226.77165 226.77165"
id="svg2"
version="1.1"
inkscape:version="0.91 r"
sodipodi:docname="rotation.svg">
<defs
id="defs4" />
<sodipodi:namedview
id="base"
pagecolor="#ffffff"
bordercolor="#666666"
borderopacity="1.0"
inkscape:pageopacity="0.0"
inkscape:pageshadow="2"
inkscape:zoom="2"
inkscape:cx="95.256309"
inkscape:cy="193.75942"
inkscape:document-units="px"
inkscape:current-layer="layer1"
showgrid="false"
fit-margin-top="0"
fit-margin-left="0"
fit-margin-right="0"
fit-margin-bottom="0"
inkscape:window-width="1855"
inkscape:window-height="1056"
inkscape:window-x="65"
inkscape:window-y="24"
inkscape:window-maximized="1" />
<metadata
id="metadata7">
<rdf:RDF>
<cc:Work
rdf:about="">
<dc:format>image/svg+xml</dc:format>
<dc:type
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
<dc:title></dc:title>
</cc:Work>
</rdf:RDF>
</metadata>
<g
inkscape:label="Layer 1"
inkscape:groupmode="layer"
id="layer1"
transform="translate(-109.37599,-227.40381)">
<g
id="g4161"
transform="matrix(1.4799279,0,0,1.514144,-50.49258,-240.01162)">
<path
style="fill:#4c4c4e"
d="m 175.63227,452.76646 c -4.46875,-0.93774 -11.21875,-3.08929 -15,-4.78121 -8.24709,-3.69017 -21.35406,-13.37364 -24.40567,-18.03098 -2.17124,-3.31373 -2.15358,-3.39279 1.41601,-6.34044 8.98492,-7.41942 8.5619,-7.37711 15.15272,-1.51551 7.49569,6.66635 18.87856,12.10104 29.12615,13.90613 15.6875,2.76328 32.5699,-2.90492 44.78685,-15.03701 21.30761,-21.15965 21.42043,-54.09472 0.25774,-75.24597 -16.4986,-16.48969 -40.34704,-20.56179 -61.06292,-10.42646 -7.89028,3.86036 -20.27088,15.13215 -20.27088,18.45542 0,1.46429 2.69199,3.44216 8.18114,6.01083 4.49962,2.10564 7.97069,4.45977 7.71347,5.2314 -0.76092,2.28276 -43.5192,27.43921 -44.63742,26.26202 -0.85926,-0.90458 -7.53255,-46.56479 -7.51343,-51.40866 0.004,-1.03123 2.60033,-0.271 7.47059,2.1875 4.1054,2.07239 8.48533,3.76799 9.73318,3.76799 1.26595,0 4.32338,-2.75199 6.91685,-6.22583 8.0603,-10.79646 20.45023,-19.26242 35.88562,-24.52041 9.52071,-3.2432 30.42538,-3.25368 40,-0.0201 24.10475,8.14083 41.33866,25.60172 48.25576,48.8913 3.36888,11.34283 3.081,28.84652 -0.6646,40.40947 -11.1378,34.38337 -46.87719,55.6626 -81.34116,48.4305 z"
id="path3349"
inkscape:connector-curvature="0" />
<path
d="m 205.99674,384.45563 a 16.359516,16.624689 0 0 1 -16.33832,16.62467 16.359516,16.624689 0 0 1 -16.38066,-16.58158 16.359516,16.624689 0 0 1 16.29586,-16.66766 16.359516,16.624689 0 0 1 16.4229,16.53839"
sodipodi:open="true"
sodipodi:end="6.2780017"
sodipodi:start="0"
sodipodi:ry="16.624689"
sodipodi:rx="16.359516"
sodipodi:cy="384.45563"
sodipodi:cx="189.63722"
sodipodi:type="arc"
id="path3357"
style="opacity:1;fill:#da4d3b;fill-opacity:1;fill-rule:evenodd;stroke:#da4d3b;stroke-width:1.82180572;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:4.9000001;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1" />
</g>
</g>
</svg>

After

Width:  |  Height:  |  Size: 3.7 KiB

View File

@ -840,7 +840,7 @@ void VPattern::ParseLineElement(VMainGraphicsScene *scene, const QDomElement &do
void VPattern::SplinesCommonAttributes(const QDomElement &domElement, quint32 &id, quint32 &idObject, quint32 &idTool)
{
ToolsCommonAttributes(domElement, id);
idObject = GetParametrUInt(domElement, VAbstractNode::AttrIdObject, NULL_ID_STR);
idObject = GetParametrUInt(domElement, AttrIdObject, NULL_ID_STR);
idTool = GetParametrUInt(domElement, VAbstractNode::AttrIdTool, NULL_ID_STR);
}
@ -1279,7 +1279,7 @@ void VPattern::ParseNodePoint(const QDomElement &domElement, const Document &par
qreal my = 0;
PointsCommonAttributes(domElement, id, mx, my);
const quint32 idObject = GetParametrUInt(domElement, VAbstractNode::AttrIdObject, NULL_ID_STR);
const quint32 idObject = GetParametrUInt(domElement, AttrIdObject, NULL_ID_STR);
const quint32 idTool = GetParametrUInt(domElement, VAbstractNode::AttrIdTool, NULL_ID_STR);
QSharedPointer<VPointF> point;
try
@ -2330,7 +2330,7 @@ void VPattern::ParseNodeArc(const QDomElement &domElement, const Document &parse
quint32 id = 0;
ToolsCommonAttributes(domElement, id);
const quint32 idObject = GetParametrUInt(domElement, VAbstractNode::AttrIdObject, NULL_ID_STR);
const quint32 idObject = GetParametrUInt(domElement, AttrIdObject, NULL_ID_STR);
const quint32 idTool = GetParametrUInt(domElement, VAbstractNode::AttrIdTool, NULL_ID_STR);
VArc *arc = nullptr;
try
@ -3130,7 +3130,7 @@ void VPattern::ToolsCommonAttributes(const QDomElement &domElement, quint32 &id)
QRectF VPattern::ActiveDrawBoundingRect() const
{
// This check helps to find missed tools in the switch
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 42, "Not all tools was used.");
Q_STATIC_ASSERT_X(static_cast<int>(Tool::LAST_ONE_DO_NOT_USE) == 43, "Not all tools was used.");
QRectF rec;
@ -3237,6 +3237,9 @@ QRectF VPattern::ActiveDrawBoundingRect() const
case Tool::TrueDarts:
rec = ToolBoundingRect<VToolTrueDarts>(rec, tool.getId());
break;
case Tool::Rotation:
rec = ToolBoundingRect<VToolRotation>(rec, tool.getId());
break;
//These tools are not accesseble in Draw mode, but still 'history' contains them.
case Tool::Detail:
case Tool::UnionDetails:

View File

@ -170,7 +170,7 @@ VExceptionToolWasDeleted &VExceptionToolWasDeleted::operator=(const VExceptionTo
* @brief raise method raise for exception
*/
// cppcheck-suppress unusedFunction
Q_NORETURN void VExceptionToolWasDeleted::VExceptionToolWasDeleted::raise() const
Q_NORETURN void VExceptionToolWasDeleted::raise() const
{
throw *this;
}

View File

@ -128,6 +128,8 @@ const QString AttrCCenter = QStringLiteral("cCenter");
const QString AttrTangent = QStringLiteral("tangent");
const QString AttrCRadius = QStringLiteral("cRadius");
const QString AttrArc = QStringLiteral("arc");
const QString AttrSuffix = QStringLiteral("suffix");
const QString AttrIdObject = QStringLiteral("idObject");
const QString TypeLineNone = QStringLiteral("none");
const QString TypeLineLine = QStringLiteral("hair");

View File

@ -130,6 +130,8 @@ extern const QString AttrCCenter;
extern const QString AttrTangent;
extern const QString AttrCRadius;
extern const QString AttrArc;
extern const QString AttrSuffix;
extern const QString AttrIdObject;
extern const QString TypeLineNone;
extern const QString TypeLineLine;

View File

@ -210,7 +210,7 @@ public:
signals:
/**
* @brief ChangedActivDraw change active pattern peace.
* @brief ChangedActivPP change active pattern peace.
* @param newName new pattern peace name.
*/
void ChangedActivPP(const QString &newName);

View File

@ -29,8 +29,6 @@
#ifndef VGEOMETRYDEF_H
#define VGEOMETRYDEF_H
#include <QString>
enum class Draw : char { Calculation, Modeling, Layout };
enum class GOType : char { Point, Arc, EllipticalArc, Spline, SplinePath, CubicBezier, CubicBezierPath, Unknown };
enum class SplinePointPosition : char { FirstPoint, LastPoint };

View File

@ -102,6 +102,7 @@ enum class Tool : ToolVisHolderType
TrueDarts,
UnionDetails,
Group,
Rotation,
LAST_ONE_DO_NOT_USE //add new stuffs above this, this constant must be last and never used
};
@ -110,6 +111,7 @@ enum class Vis : ToolVisHolderType
ControlPointSpline = static_cast<ToolVisHolderType>(Tool::LAST_ONE_DO_NOT_USE),
GraphicsSimpleTextItem,
SimplePoint,
SimpleCurve,
Line,
Path,
ToolAlongLine,
@ -139,7 +141,8 @@ enum class Vis : ToolVisHolderType
ToolCutSplinePath,
ToolLineIntersectAxis,
ToolCurveIntersectAxis,
ToolTrueDarts
ToolTrueDarts,
ToolRotation
};
enum class VarType : char { Measurement, Increment, LineLength, CurveLength, LineAngle, CurveAngle, ArcRadius,

View File

@ -37,7 +37,8 @@ HEADERS += \
$$PWD/tools/dialogpointofintersectioncurves.h \
$$PWD/tools/dialogcubicbezier.h \
$$PWD/tools/dialogcubicbezierpath.h \
$$PWD/tools/dialoggroup.h
$$PWD/tools/dialoggroup.h \
$$PWD/tools/dialogrotation.h
SOURCES += \
$$PWD/tools/dialogalongline.cpp \
@ -74,7 +75,8 @@ SOURCES += \
$$PWD/tools/dialogpointofintersectioncurves.cpp \
$$PWD/tools/dialogcubicbezier.cpp \
$$PWD/tools/dialogcubicbezierpath.cpp \
$$PWD/tools/dialoggroup.cpp
$$PWD/tools/dialoggroup.cpp \
$$PWD/tools/dialogrotation.cpp
FORMS += \
$$PWD/tools/dialogalongline.ui \
@ -110,4 +112,5 @@ FORMS += \
$$PWD/tools/dialogpointofintersectioncurves.ui \
$$PWD/tools/dialogcubicbezier.ui \
$$PWD/tools/dialogcubicbezierpath.ui \
$$PWD/tools/dialoggroup.ui
$$PWD/tools/dialoggroup.ui \
$$PWD/tools/dialogrotation.ui

View File

@ -61,6 +61,7 @@
#include "dialogs/tools/dialogpointfromarcandtangent.h"
#include "dialogs/tools/dialogtruedarts.h"
#include "dialogs/tools/dialoggroup.h"
#include "dialogs/tools/dialogrotation.h"
#include "dialogs/support/dialogeditwrongformula.h"
#include "dialogs/support/dialogundo.h"

View File

@ -0,0 +1,323 @@
/************************************************************************
**
** @file dialogrotation.cpp
** @author Roman Telezhynskyi <dismine(at)gmail.com>
** @date 10 4, 2016
**
** @brief
** @copyright
** This source code is part of the Valentine project, a pattern making
** program, whose allow create and modeling patterns of clothing.
** Copyright (C) 2016 Valentina project
** <https://bitbucket.org/dismine/valentina> All Rights Reserved.
**
** Valentina is free software: you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation, either version 3 of the License, or
** (at your option) any later version.
**
** Valentina is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with Valentina. If not, see <http://www.gnu.org/licenses/>.
**
*************************************************************************/
#include "dialogrotation.h"
#include "ui_dialogrotation.h"
#include <QTimer>
#include "../vgeometry/vpointf.h"
#include "../vpatterndb/vcontainer.h"
#include "../vpatterndb/vtranslatevars.h"
#include "../ifc/xml/vdomdocument.h"
#include "../../visualization/line/vistoolrotation.h"
#include "../support/dialogeditwrongformula.h"
//---------------------------------------------------------------------------------------------------------------------
DialogRotation::DialogRotation(const VContainer *data, const quint32 &toolId, QWidget *parent)
: DialogTool(data, toolId, parent),
ui(new Ui::DialogRotation),
flagAngle(false),
timerAngle(nullptr),
formulaAngle(),
formulaBaseHeightAngle(0),
objects(),
stage1(true)
{
ui->setupUi(this);
this->formulaBaseHeightAngle = ui->plainTextEditFormula->height();
ui->plainTextEditFormula->installEventFilter(this);
// ui->lineEditSuffix->setText(/*qApp->getCurrentDocument()->GenerateLabel(LabelType::NewLabel)*/);
timerAngle = new QTimer(this);
connect(timerAngle, &QTimer::timeout, this, &DialogRotation::EvalAngle);
InitOkCancelApply(ui);
FillComboBoxPoints(ui->comboBoxOriginPoint);
// flagName = true;
CheckState();
connect(ui->lineEditSuffix, &QLineEdit::textChanged, this, &DialogRotation::SuffixChanged);
connect(ui->toolButtonExprAngle, &QPushButton::clicked, this, &DialogRotation::FXAngle);
connect(ui->plainTextEditFormula, &QPlainTextEdit::textChanged, this, &DialogRotation::AngleChanged);
connect(ui->pushButtonGrowLength, &QPushButton::clicked, this, &DialogRotation::DeployAngleTextEdit);
vis = new VisToolRotation(data);
}
//---------------------------------------------------------------------------------------------------------------------
DialogRotation::~DialogRotation()
{
delete ui;
}
//---------------------------------------------------------------------------------------------------------------------
quint32 DialogRotation::GetOrigPointId() const
{
return getCurrentObjectId(ui->comboBoxOriginPoint);
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::SetOrigPointId(const quint32 &value)
{
ChangeCurrentData(ui->comboBoxOriginPoint, value);
VisToolRotation *operation = qobject_cast<VisToolRotation *>(vis);
SCASSERT(operation != nullptr);
operation->SetOriginPointId(value);
}
//---------------------------------------------------------------------------------------------------------------------
QString DialogRotation::GetAngle() const
{
return qApp->TrVars()->TryFormulaFromUser(formulaAngle, qApp->Settings()->GetOsSeparator());
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::SetAngle(const QString &value)
{
formulaAngle = qApp->TrVars()->FormulaToUser(value);
// increase height if needed.
if (formulaAngle.length() > 80)
{
this->DeployAngleTextEdit();
}
ui->plainTextEditFormula->setPlainText(formulaAngle);
VisToolRotation *operation = qobject_cast<VisToolRotation *>(vis);
SCASSERT(operation != nullptr);
operation->SetAngle(formulaAngle);
MoveCursorToEnd(ui->plainTextEditFormula);
}
//---------------------------------------------------------------------------------------------------------------------
QString DialogRotation::GetSuffix() const
{
return ui->lineEditSuffix->text();
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::SetSuffix(const QString &value)
{
ui->lineEditSuffix->setText(value);
}
//---------------------------------------------------------------------------------------------------------------------
QVector<quint32> DialogRotation::GetObjects() const
{
return objects.toVector();
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::ShowDialog(bool click)
{
if (stage1 && not click)
{
if (objects.isEmpty())
{
return;
}
stage1 = false;
auto scene = qApp->getCurrentScene();
SCASSERT(scene != nullptr);
scene->clearSelection();
VisToolRotation *operation = qobject_cast<VisToolRotation *>(vis);
SCASSERT(operation != nullptr);
operation->SetObjects(objects.toVector());
operation->VisualMode();
emit ToolTip("Select origin point");
}
else if (not stage1 && prepare && click)
{
/*We will ignore click if pointer is in point circle*/
VMainGraphicsScene *scene = qobject_cast<VMainGraphicsScene *>(qApp->getCurrentScene());
SCASSERT(scene != nullptr);
const QSharedPointer<VPointF> point = data->GeometricObject<VPointF>(GetOrigPointId());
const QLineF line = QLineF(point->toQPointF(), scene->getScenePos());
//Radius of point circle, but little bigger. Need handle with hover sizes.
const qreal radius = ToPixel(DefPointRadius/*mm*/, Unit::Mm)*1.5;
if (line.length() <= radius)
{
return;
}
VisToolRotation *operation = qobject_cast<VisToolRotation *>(vis);
SCASSERT(operation != nullptr);
SetAngle(operation->Angle());//Show in dialog angle that a user choose
setModal(true);
emit ToolTip("");
timerAngle->start();
show();
}
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::ChosenObject(quint32 id, const SceneObject &type)
{
if (not stage1 && not prepare)// After first choose we ignore all objects
{
if (type == SceneObject::Point)
{
if (SetObject(id, ui->comboBoxOriginPoint, ""))
{
VisToolRotation *operation = qobject_cast<VisToolRotation *>(vis);
SCASSERT(operation != nullptr);
connect(operation, &Visualization::ToolTip, this, &DialogTool::ShowVisToolTip);
operation->SetOriginPointId(id);
operation->RefreshGeometry();
prepare = true;
}
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::SelectedObject(bool selected, quint32 object, quint32 tool)
{
if (stage1)
{
if (selected)
{
if (not objects.contains(object))
{
objects.append(object);
}
}
else
{
objects.removeOne(object);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::DeployAngleTextEdit()
{
DeployFormula(ui->plainTextEditFormula, ui->pushButtonGrowLength, formulaBaseHeightAngle);
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::AngleChanged()
{
labelEditFormula = ui->labelEditAngle;
labelResultCalculation = ui->labelResultAngle;
ValFormulaChanged(flagAngle, ui->plainTextEditFormula, timerAngle, degreeSymbol);
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::FXAngle()
{
DialogEditWrongFormula *dialog = new DialogEditWrongFormula(data, toolId, this);
dialog->setWindowTitle(tr("Edit angle"));
dialog->SetFormula(GetAngle());
dialog->setPostfix(VDomDocument::UnitsToStr(qApp->patternUnit(), true));
if (dialog->exec() == QDialog::Accepted)
{
SetAngle(dialog->GetFormula());
}
delete dialog;
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::SuffixChanged()
{
QLineEdit* edit = qobject_cast<QLineEdit*>(sender());
if (edit)
{
const QString name = edit->text();
// QRegularExpression rx(NameRegExp());
if (name.isEmpty()/* || (pointName != name && not data->IsUnique(name)) || not rx.match(name).hasMatch()*/)
{
flagName = false;
ChangeColor(ui->labelSuffix, Qt::red);
}
else
{
flagName = true;
ChangeColor(ui->labelSuffix, okColor);
}
}
CheckState();
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::CheckState()
{
SCASSERT(bOk != nullptr);
bOk->setEnabled(flagAngle && flagName);
SCASSERT(bApply != nullptr);
bApply->setEnabled(bOk->isEnabled());
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::ShowVisualization()
{
AddVisualization<VisToolRotation>();
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::SaveData()
{
formulaAngle = ui->plainTextEditFormula->toPlainText();
formulaAngle.replace("\n", " ");
VisToolRotation *operation = qobject_cast<VisToolRotation *>(vis);
SCASSERT(operation != nullptr);
operation->SetObjects(objects.toVector());
operation->SetOriginPointId(GetOrigPointId());
operation->SetAngle(formulaAngle);
operation->RefreshGeometry();
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::closeEvent(QCloseEvent *event)
{
ui->plainTextEditFormula->blockSignals(true);
DialogTool::closeEvent(event);
}
//---------------------------------------------------------------------------------------------------------------------
void DialogRotation::EvalAngle()
{
labelEditFormula = ui->labelEditAngle;
Eval(ui->plainTextEditFormula->toPlainText(), flagAngle, ui->labelResultAngle, degreeSymbol, false);
}

View File

@ -0,0 +1,101 @@
/************************************************************************
**
** @file dialogrotation.h
** @author Roman Telezhynskyi <dismine(at)gmail.com>
** @date 10 4, 2016
**
** @brief
** @copyright
** This source code is part of the Valentine project, a pattern making
** program, whose allow create and modeling patterns of clothing.
** Copyright (C) 2016 Valentina project
** <https://bitbucket.org/dismine/valentina> All Rights Reserved.
**
** Valentina is free software: you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation, either version 3 of the License, or
** (at your option) any later version.
**
** Valentina is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with Valentina. If not, see <http://www.gnu.org/licenses/>.
**
*************************************************************************/
#ifndef DIALOGROTATION_H
#define DIALOGROTATION_H
#include "dialogtool.h"
namespace Ui
{
class DialogRotation;
}
class DialogRotation : public DialogTool
{
Q_OBJECT
public:
explicit DialogRotation(const VContainer *data, const quint32 &toolId, QWidget *parent = nullptr);
virtual ~DialogRotation();
quint32 GetOrigPointId() const;
void SetOrigPointId(const quint32 &value);
QString GetAngle() const;
void SetAngle(const QString &value);
QString GetSuffix() const;
void SetSuffix(const QString &value);
QVector<quint32> GetObjects() const;
virtual void ShowDialog(bool click) Q_DECL_OVERRIDE;
public slots:
virtual void ChosenObject(quint32 id, const SceneObject &type) Q_DECL_OVERRIDE;
virtual void SelectedObject(bool selected, quint32 object, quint32 tool) Q_DECL_OVERRIDE;
private slots:
/** @brief DeployAngleTextEdit grow or shrink formula input */
void DeployAngleTextEdit();
void AngleChanged();
void FXAngle();
void SuffixChanged();
protected:
virtual void CheckState() Q_DECL_OVERRIDE;
virtual void ShowVisualization() Q_DECL_OVERRIDE;
/** @brief SaveData Put dialog data in local variables */
virtual void SaveData() Q_DECL_OVERRIDE;
virtual void closeEvent(QCloseEvent *event) Q_DECL_OVERRIDE;
private:
Q_DISABLE_COPY(DialogRotation)
Ui::DialogRotation *ui;
/** @brief flagAngle true if value of angle is correct */
bool flagAngle;
/** @brief timerAngle timer of check formula of angle */
QTimer *timerAngle;
/** @brief angle formula of angle */
QString formulaAngle;
/** @brief formulaBaseHeightAngle base height defined by dialogui */
int formulaBaseHeightAngle;
QList<quint32> objects;
bool stage1;
void EvalAngle();
};
#endif // DIALOGROTATION_H

View File

@ -0,0 +1,275 @@
<?xml version="1.0" encoding="UTF-8"?>
<ui version="4.0">
<class>DialogRotation</class>
<widget class="QDialog" name="DialogRotation">
<property name="geometry">
<rect>
<x>0</x>
<y>0</y>
<width>309</width>
<height>189</height>
</rect>
</property>
<property name="windowTitle">
<string>Rotation</string>
</property>
<property name="windowIcon">
<iconset resource="../../../vmisc/share/resources/icon.qrc">
<normaloff>:/icon/64x64/icon64x64.png</normaloff>:/icon/64x64/icon64x64.png</iconset>
</property>
<layout class="QVBoxLayout" name="verticalLayout">
<item>
<layout class="QHBoxLayout" name="horizontalLayout_6">
<item>
<widget class="QPlainTextEdit" name="plainTextEditFormula">
<property name="sizePolicy">
<sizepolicy hsizetype="Expanding" vsizetype="Preferred">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="maximumSize">
<size>
<width>16777215</width>
<height>28</height>
</size>
</property>
<property name="toolTip">
<string>Calulation</string>
</property>
<property name="tabChangesFocus">
<bool>true</bool>
</property>
</widget>
</item>
<item>
<widget class="QPushButton" name="pushButtonGrowLength">
<property name="maximumSize">
<size>
<width>18</width>
<height>18</height>
</size>
</property>
<property name="sizeIncrement">
<size>
<width>0</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Show full calculation in message box&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</string>
</property>
<property name="text">
<string notr="true"/>
</property>
<property name="icon">
<iconset theme="go-down">
<normaloff/>
</iconset>
</property>
<property name="iconSize">
<size>
<width>16</width>
<height>16</height>
</size>
</property>
<property name="flat">
<bool>true</bool>
</property>
</widget>
</item>
</layout>
</item>
<item>
<layout class="QHBoxLayout" name="horizontalLayout">
<item alignment="Qt::AlignLeft">
<widget class="QLabel" name="labelEditAngle">
<property name="sizePolicy">
<sizepolicy hsizetype="Fixed" vsizetype="Preferred">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="palette">
<palette>
<active>
<colorrole role="WindowText">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>255</red>
<green>0</green>
<blue>0</blue>
</color>
</brush>
</colorrole>
</active>
<inactive>
<colorrole role="WindowText">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>255</red>
<green>0</green>
<blue>0</blue>
</color>
</brush>
</colorrole>
</inactive>
<disabled>
<colorrole role="WindowText">
<brush brushstyle="SolidPattern">
<color alpha="255">
<red>159</red>
<green>158</green>
<blue>158</blue>
</color>
</brush>
</colorrole>
</disabled>
</palette>
</property>
<property name="text">
<string>Angle:</string>
</property>
</widget>
</item>
<item>
<spacer name="horizontalSpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
<property name="sizeHint" stdset="0">
<size>
<width>40</width>
<height>20</height>
</size>
</property>
</spacer>
</item>
<item alignment="Qt::AlignRight">
<widget class="QToolButton" name="toolButtonExprAngle">
<property name="toolTip">
<string>Formula wizard</string>
</property>
<property name="text">
<string notr="true">...</string>
</property>
<property name="icon">
<iconset resource="../../../vmisc/share/resources/icon.qrc">
<normaloff>:/icon/24x24/fx.png</normaloff>:/icon/24x24/fx.png</iconset>
</property>
<property name="iconSize">
<size>
<width>24</width>
<height>24</height>
</size>
</property>
</widget>
</item>
<item alignment="Qt::AlignRight">
<widget class="QLabel" name="label_2">
<property name="text">
<string/>
</property>
<property name="pixmap">
<pixmap resource="../../../vmisc/share/resources/icon.qrc">:/icon/24x24/equal.png</pixmap>
</property>
</widget>
</item>
<item alignment="Qt::AlignRight">
<widget class="QLabel" name="labelResultAngle">
<property name="sizePolicy">
<sizepolicy hsizetype="Fixed" vsizetype="Preferred">
<horstretch>0</horstretch>
<verstretch>0</verstretch>
</sizepolicy>
</property>
<property name="minimumSize">
<size>
<width>87</width>
<height>0</height>
</size>
</property>
<property name="toolTip">
<string>Value</string>
</property>
<property name="text">
<string notr="true">_</string>
</property>
</widget>
</item>
</layout>
</item>
<item>
<layout class="QFormLayout" name="formLayout">
<item row="0" column="0">
<widget class="QLabel" name="labelOriginPoint">
<property name="text">
<string>Origin Point:</string>
</property>
</widget>
</item>
<item row="0" column="1">
<widget class="QComboBox" name="comboBoxOriginPoint"/>
</item>
<item row="1" column="0">
<widget class="QLabel" name="labelSuffix">
<property name="text">
<string>Suffix:</string>
</property>
</widget>
</item>
<item row="1" column="1">
<widget class="QLineEdit" name="lineEditSuffix"/>
</item>
</layout>
</item>
<item>
<widget class="QDialogButtonBox" name="buttonBox">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
<property name="standardButtons">
<set>QDialogButtonBox::Cancel|QDialogButtonBox::Ok</set>
</property>
</widget>
</item>
</layout>
</widget>
<resources>
<include location="../../../vmisc/share/resources/icon.qrc"/>
</resources>
<connections>
<connection>
<sender>buttonBox</sender>
<signal>accepted()</signal>
<receiver>DialogRotation</receiver>
<slot>accept()</slot>
<hints>
<hint type="sourcelabel">
<x>248</x>
<y>254</y>
</hint>
<hint type="destinationlabel">
<x>157</x>
<y>274</y>
</hint>
</hints>
</connection>
<connection>
<sender>buttonBox</sender>
<signal>rejected()</signal>
<receiver>DialogRotation</receiver>
<slot>reject()</slot>
<hints>
<hint type="sourcelabel">
<x>316</x>
<y>260</y>
</hint>
<hint type="destinationlabel">
<x>286</x>
<y>274</y>
</hint>
</hints>
</connection>
</connections>
</ui>

View File

@ -58,5 +58,6 @@
#include "toolpoint/toolsinglepoint/vtoolpointfromcircleandtangent.h"
#include "toolpoint/toolsinglepoint/vtoolpointfromarcandtangent.h"
#include "toolpoint/tooldoublepoint/vtooltruedarts.h"
#include "operation/vtoolrotation.h"
#endif // DRAWTOOLS_H

View File

@ -0,0 +1,934 @@
/************************************************************************
**
** @file vtoolrotation.cpp
** @author Roman Telezhynskyi <dismine(at)gmail.com>
** @date 12 4, 2016
**
** @brief
** @copyright
** This source code is part of the Valentine project, a pattern making
** program, whose allow create and modeling patterns of clothing.
** Copyright (C) 2016 Valentina project
** <https://bitbucket.org/dismine/valentina> All Rights Reserved.
**
** Valentina is free software: you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation, either version 3 of the License, or
** (at your option) any later version.
**
** Valentina is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with Valentina. If not, see <http://www.gnu.org/licenses/>.
**
*************************************************************************/
#include "vtoolrotation.h"
#include "../../../dialogs/tools/dialogrotation.h"
#include "../vgeometry/vpointf.h"
#include "../vgeometry/varc.h"
#include "../vgeometry/vellipticalarc.h"
#include "../vgeometry/vspline.h"
#include "../vgeometry/vsplinepath.h"
#include "../vgeometry/vcubicbezier.h"
#include "../vgeometry/vcubicbezierpath.h"
#include "../../../visualization/line/vistoolrotation.h"
#include "../vwidgets/vsimplepoint.h"
#include "../vwidgets/vsimplecurve.h"
const QString VToolRotation::TagName = QStringLiteral("operation");
const QString VToolRotation::TagItem = QStringLiteral("item");
const QString VToolRotation::TagSource = QStringLiteral("source");
const QString VToolRotation::TagDestination = QStringLiteral("destination");
//---------------------------------------------------------------------------------------------------------------------
VToolRotation::VToolRotation(VAbstractPattern *doc, VContainer *data, quint32 id, quint32 origPointId,
const QString &angle, const QString &suffix, const QVector<quint32> &source,
const QVector<DestinationItem> &destination, const Source &typeCreation,
QGraphicsItem *parent)
: VDrawTool(doc, data, id),
QGraphicsItem(parent),
origPointId(origPointId),
angle(angle),
suffix(suffix),
source(source),
destination(destination),
rObjects()
{
for (int i = 0; i < destination.size(); ++i)
{
const DestinationItem object = destination.at(i);
const QSharedPointer<VGObject> obj = data->GetGObject(object.id);
// This check helps to find missed objects in the switch
Q_STATIC_ASSERT_X(static_cast<int>(GOType::Unknown) == 7, "Not all objects were handled.");
switch(static_cast<GOType>(obj->getType()))
{
case GOType::Point:
{
VSimplePoint *point = new VSimplePoint(object.id, QColor(baseColor), *data->GetPatternUnit(), &factor);
point->setParentItem(this);
point->SetType(GOType::Point);
connect(point, &VSimplePoint::Choosed, [this](quint32 id)
{
emit ChoosedTool(id, SceneObject::Point);
});
connect(point, &VSimplePoint::Selected, this, &VToolRotation::ObjectSelected);
connect(point, &VSimplePoint::ShowContextMenu, this, &VToolRotation::contextMenuEvent);
connect(point, &VSimplePoint::Delete, this, &VToolRotation::DeleteFromLabel);
connect(point, &VSimplePoint::NameChangedPosition, this, &VToolRotation::LabelChangePosition);
point->RefreshGeometry(*VAbstractTool::data.GeometricObject<VPointF>(object.id));
rObjects.insert(object.id, point);
break;
}
case GOType::Arc:
case GOType::EllipticalArc:
{
VSimpleCurve *curve = InitCurve(object.id, data, GOType::Arc);
connect(curve, &VSimpleCurve::Choosed, [this](quint32 id)
{
emit ChoosedTool(id, SceneObject::Arc);
});
break;
}
case GOType::Spline:
case GOType::CubicBezier:
{
VSimpleCurve *curve = InitCurve(object.id, data, GOType::Spline);
connect(curve, &VSimpleCurve::Choosed, [this](quint32 id)
{
emit ChoosedTool(id, SceneObject::Spline);
});
break;
}
case GOType::SplinePath:
case GOType::CubicBezierPath:
{
VSimpleCurve *curve = InitCurve(object.id, data, GOType::SplinePath);
connect(curve, &VSimpleCurve::Choosed, [this](quint32 id)
{
emit ChoosedTool(id, SceneObject::SplinePath);
});
break;
}
case GOType::Unknown:
break;
}
}
ToolCreation(typeCreation);
}
//---------------------------------------------------------------------------------------------------------------------
VToolRotation::~VToolRotation()
{}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::setDialog()
{
SCASSERT(dialog != nullptr);
DialogRotation *dialogTool = qobject_cast<DialogRotation*>(dialog);
SCASSERT(dialogTool != nullptr);
dialogTool->SetOrigPointId(origPointId);
dialogTool->SetAngle(angle);
dialogTool->SetSuffix(suffix);
}
//---------------------------------------------------------------------------------------------------------------------
VToolRotation *VToolRotation::Create(DialogTool *dialog, VMainGraphicsScene *scene, VAbstractPattern *doc,
VContainer *data)
{
SCASSERT(dialog != nullptr);
DialogRotation *dialogTool = qobject_cast<DialogRotation*>(dialog);
SCASSERT(dialogTool != nullptr);
const quint32 originPointId = dialogTool->GetOrigPointId();
QString angle = dialogTool->GetAngle();
const QString suffix = dialogTool->GetSuffix();
const QVector<quint32> source = dialogTool->GetObjects();
VToolRotation* operation = Create(0, originPointId, angle, suffix, source, QVector<DestinationItem>(),
scene, doc, data, Document::FullParse, Source::FromGui);
if (operation != nullptr)
{
operation->dialog = dialogTool;
}
return operation;
}
//---------------------------------------------------------------------------------------------------------------------
VToolRotation *VToolRotation::Create(const quint32 _id, const quint32 &origin, QString &angle, const QString &suffix,
const QVector<quint32> &source,
const QVector<DestinationItem> &destination,
VMainGraphicsScene *scene, VAbstractPattern *doc, VContainer *data,
const Document &parse, const Source &typeCreation)
{
qreal calcAngle = 0;
calcAngle = CheckFormula(_id, angle, data);
const auto originPoint = *data->GeometricObject<VPointF>(origin);
const QPointF oPoint = originPoint.toQPointF();
QVector<DestinationItem> dest = destination;
quint32 id = _id;
if (typeCreation == Source::FromGui)
{
dest.clear();// Try to avoid mistake, value must be empty
id = data->getNextId();//Just reserve id for tool
for (int i = 0; i < source.size(); ++i)
{
const quint32 idObject = source.at(i);
const QSharedPointer<VGObject> obj = data->GetGObject(idObject);
// This check helps to find missed objects in the switch
Q_STATIC_ASSERT_X(static_cast<int>(GOType::Unknown) == 7, "Not all objects were handled.");
switch(static_cast<GOType>(obj->getType()))
{
case GOType::Point:
dest.append(CreatePoint(id, idObject, oPoint, calcAngle, suffix, data));
break;
case GOType::Arc:
dest.append(CreateArc(id, idObject, oPoint, calcAngle, suffix, data));
break;
case GOType::EllipticalArc:
//dest.append(CreateItem<VEllipticalArc>(id, idObject, oPoint, angle, suffix));
break;
case GOType::Spline:
dest.append(CreateCurve<VSpline>(id, idObject, oPoint, calcAngle, suffix, data));
break;
case GOType::SplinePath:
dest.append(CreateCurveWithSegments<VSplinePath>(id, idObject, oPoint, calcAngle, suffix, data));
break;
case GOType::CubicBezier:
dest.append(CreateCurve<VCubicBezier>(id, idObject, oPoint, calcAngle, suffix, data));
break;
case GOType::CubicBezierPath:
dest.append(CreateCurveWithSegments<VCubicBezierPath>(id, idObject, oPoint, calcAngle, suffix,
data));
break;
case GOType::Unknown:
break;
}
}
}
else
{
for (int i = 0; i < source.size(); ++i)
{
const quint32 idObject = source.at(i);
const QSharedPointer<VGObject> obj = data->GetGObject(idObject);
// This check helps to find missed objects in the switch
Q_STATIC_ASSERT_X(static_cast<int>(GOType::Unknown) == 7, "Not all objects were handled.");
switch(static_cast<GOType>(obj->getType()))
{
case GOType::Point:
UpdatePoint(id, idObject, oPoint, calcAngle, suffix, data, dest.at(i).id, dest.at(i).mx,
dest.at(i).my);
break;
case GOType::Arc:
UpdateArc(id, idObject, oPoint, calcAngle, suffix, data, dest.at(i).id);
break;
case GOType::EllipticalArc:
//dest.append(UpdateItem<VEllipticalArc>(id, idObject, oPoint, angle, suffix, data));
break;
case GOType::Spline:
UpdateCurve<VSpline>(id, idObject, oPoint, calcAngle, suffix, data, dest.at(i).id);
break;
case GOType::SplinePath:
UpdateCurveWithSegments<VSplinePath>(id, idObject, oPoint, calcAngle, suffix, data, dest.at(i).id);
break;
case GOType::CubicBezier:
UpdateCurve<VCubicBezier>(id, idObject, oPoint, calcAngle, suffix, data, dest.at(i).id);
break;
case GOType::CubicBezierPath:
UpdateCurveWithSegments<VCubicBezierPath>(id, idObject, oPoint, calcAngle, suffix, data,
dest.at(i).id);
break;
case GOType::Unknown:
break;
}
}
if (parse != Document::FullParse)
{
doc->UpdateToolData(id, data);
}
}
VDrawTool::AddRecord(id, Tool::Rotation, doc);
if (parse == Document::FullParse)
{
VToolRotation *tool = new VToolRotation(doc, data, id, origin, angle, suffix, source, dest, typeCreation);
scene->addItem(tool);
InitRotationToolConnections(scene, tool);
doc->AddTool(id, tool);
doc->IncrementReferens(originPoint.getIdTool());
for (int i = 0; i < source.size(); ++i)
{
doc->IncrementReferens(data->GetGObject(source.at(i))->getIdTool());
}
for (int i = 0; i < dest.size(); ++i)
{
doc->IncrementReferens(data->GetGObject(dest.at(i).id)->getIdTool());
}
return tool;
}
return nullptr;
}
//---------------------------------------------------------------------------------------------------------------------
QString VToolRotation::getTagName() const
{
return VToolRotation::TagName;
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::setEnabled(bool enabled)
{
this->setEnabled(enabled);
}
//---------------------------------------------------------------------------------------------------------------------
QString VToolRotation::Suffix() const
{
return suffix;
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::GroupVisibility(quint32 object, bool visible)
{
if (rObjects.contains(object))
{
VAbstractSimple *obj = rObjects.value(object);
if (obj->GetType() == GOType::Point)
{
VSimplePoint *item = qobject_cast<VSimplePoint *>(obj);
SCASSERT(item != nullptr);
item->setVisible(visible);
}
else
{
VSimpleCurve *item = qobject_cast<VSimpleCurve *>(obj);
SCASSERT(item != nullptr);
item->setVisible(visible);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::ShowVisualization(bool show)
{
ShowToolVisualization<VisToolRotation>(show);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::FullUpdateFromFile()
{
ReadAttributes();
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
if (i.value()->GetType() == GOType::Point)
{
VSimplePoint *item = qobject_cast<VSimplePoint *>(i.value());
SCASSERT(item != nullptr);
item->RefreshGeometry(*VAbstractTool::data.GeometricObject<VPointF>(i.key()));
}
else
{
VSimpleCurve *item = qobject_cast<VSimpleCurve *>(i.value());
SCASSERT(item != nullptr);
item->RefreshGeometry(VAbstractTool::data.GeometricObject<VAbstractCurve>(i.key()));
}
}
SetVisualization();
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowHover(bool enabled)
{
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
if (i.value()->GetType() == GOType::Point)
{
VSimplePoint *item = qobject_cast<VSimplePoint *>(i.value());
SCASSERT(item != nullptr);
item->setAcceptHoverEvents(enabled);
}
else
{
VSimpleCurve *item = qobject_cast<VSimpleCurve *>(i.value());
SCASSERT(item != nullptr);
item->setAcceptHoverEvents(enabled);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowSelecting(bool enabled)
{
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
if (i.value()->GetType() == GOType::Point)
{
VSimplePoint *item = qobject_cast<VSimplePoint *>(i.value());
SCASSERT(item != nullptr);
item->setFlag(QGraphicsItem::ItemIsSelectable, enabled);
}
else
{
VSimpleCurve *item = qobject_cast<VSimpleCurve *>(i.value());
SCASSERT(item != nullptr);
item->setFlag(QGraphicsItem::ItemIsSelectable, enabled);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowPointHover(bool enabled)
{
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
if (i.value()->GetType() == GOType::Point)
{
VSimplePoint *item = qobject_cast<VSimplePoint *>(i.value());
SCASSERT(item != nullptr);
item->setAcceptHoverEvents(enabled);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowPointSelecting(bool enabled)
{
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
if (i.value()->GetType() == GOType::Point)
{
VSimplePoint *item = qobject_cast<VSimplePoint *>(i.value());
SCASSERT(item != nullptr);
item->setFlag(QGraphicsItem::ItemIsSelectable, enabled);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowPointLabelHover(bool enabled)
{
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
if (i.value()->GetType() == GOType::Point)
{
VSimplePoint *item = qobject_cast<VSimplePoint *>(i.value());
SCASSERT(item != nullptr);
item->AllowLabelHover(enabled);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowPointLabelSelecting(bool enabled)
{
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
if (i.value()->GetType() == GOType::Point)
{
VSimplePoint *item = qobject_cast<VSimplePoint *>(i.value());
SCASSERT(item != nullptr);
item->AllowLabelSelecting(enabled);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowSplineHover(bool enabled)
{
AllowCurveHover(enabled, GOType::Spline);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowSplineSelecting(bool enabled)
{
AllowCurveSelecting(enabled, GOType::Spline);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowSplinePathHover(bool enabled)
{
AllowCurveHover(enabled, GOType::SplinePath);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowSplinePathSelecting(bool enabled)
{
AllowCurveSelecting(enabled, GOType::SplinePath);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowArcHover(bool enabled)
{
AllowCurveHover(enabled, GOType::Arc);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowArcSelecting(bool enabled)
{
AllowCurveSelecting(enabled, GOType::Arc);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AddToFile()
{
QDomElement domElement = doc->createElement(getTagName());
QSharedPointer<VGObject> obj = VAbstractTool::data.GetFakeGObject(id);
SaveOptions(domElement, obj);
AddToCalculation(domElement);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::RefreshDataInFile()
{
QDomElement domElement = doc->elementById(id);
if (domElement.isElement())
{
QSharedPointer<VGObject> obj = VAbstractTool::data.GetFakeGObject(id);
SaveOptions(domElement, obj);
}
else
{
qCDebug(vTool, "Can't find tool with id = %u", id);
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::SetVisualization()
{
if (vis != nullptr)
{
VisToolRotation *visual = qobject_cast<VisToolRotation *>(vis);
SCASSERT(visual != nullptr);
visual->SetObjects(source);
visual->SetOriginPointId(origPointId);
visual->SetAngle(angle);
visual->RefreshGeometry();
}
}
//---------------------------------------------------------------------------------------------------------------------
QRectF VToolRotation::boundingRect() const
{
QRectF recTool;
const QList<QGraphicsItem *> items = childItems();
foreach (QGraphicsItem *item, items)
{
recTool = recTool.united(item->boundingRect());
recTool = recTool.united(item->childrenBoundingRect());
}
return recTool;
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::paint(QPainter *painter, const QStyleOptionGraphicsItem *option, QWidget *widget)
{
Q_UNUSED(painter);
Q_UNUSED(option);
Q_UNUSED(widget);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::Disable(bool disable, const QString &namePP)
{
enabled = !CorrectDisable(disable, namePP);
setEnabled(enabled);
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
i.value()->SetEnabled(enabled);
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::ObjectSelected(bool selected, quint32 objId)
{
emit ChangedToolSelection(selected, objId, id);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::DeleteFromLabel()
{
try
{
DeleteTool();
}
catch(const VExceptionToolWasDeleted &e)
{
Q_UNUSED(e);
return;//Leave this method immediately!!!
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::LabelChangePosition(const QPointF &pos, quint32 labelId)
{
if (rObjects.contains(labelId))
{
VAbstractSimple *obj = rObjects.value(labelId);
if (obj->GetType() == GOType::Point)
{
VSimplePoint *item = qobject_cast<VSimplePoint *>(obj);
SCASSERT(item != nullptr);
ChangePosition(item, labelId, pos);
}
else
{
VSimpleCurve *item = qobject_cast<VSimpleCurve *>(obj);
SCASSERT(item != nullptr);
ChangePosition(item, labelId, pos);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::SaveDialog(QDomElement &domElement)
{
SCASSERT(dialog != nullptr);
DialogRotation *dialogTool = qobject_cast<DialogRotation*>(dialog);
SCASSERT(dialogTool != nullptr);
doc->SetAttribute(domElement, AttrCenter, QString().setNum(dialogTool->GetOrigPointId()));
doc->SetAttribute(domElement, AttrAngle, dialogTool->GetAngle());
doc->SetAttribute(domElement, AttrSuffix, dialogTool->GetSuffix());
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::ReadToolAttributes(const QDomElement &domElement)
{
origPointId = doc->GetParametrUInt(domElement, AttrCenter, NULL_ID_STR);
angle = doc->GetParametrString(domElement, AttrAngle, "0");
suffix = doc->GetParametrString(domElement, AttrSuffix);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::SaveOptions(QDomElement &tag, QSharedPointer<VGObject> &obj)
{
VDrawTool::SaveOptions(tag, obj);
doc->SetAttribute(tag, AttrCenter, QString().setNum(origPointId));
doc->SetAttribute(tag, AttrAngle, angle);
doc->SetAttribute(tag, AttrSuffix, suffix);
QDomElement tagObjects = doc->createElement(TagSource);
for (int i = 0; i < source.size(); ++i)
{
QDomElement item = doc->createElement(TagItem);
doc->SetAttribute(item, AttrIdObject, source.at(i));
tagObjects.appendChild(item);
}
tag.appendChild(tagObjects);
tagObjects = doc->createElement(TagDestination);
for (int i = 0; i < destination.size(); ++i)
{
QDomElement item = doc->createElement(TagItem);
doc->SetAttribute(item, AttrIdObject, destination.at(i).id);
doc->SetAttribute(item, AttrMx, qApp->fromPixel(destination.at(i).mx));
doc->SetAttribute(item, AttrMy, qApp->fromPixel(destination.at(i).my));
tagObjects.appendChild(item);
}
tag.appendChild(tagObjects);
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::contextMenuEvent(QGraphicsSceneContextMenuEvent *event)
{
try
{
ContextMenu<DialogRotation>(this, event);
}
catch(const VExceptionToolWasDeleted &e)
{
Q_UNUSED(e);
return;//Leave this method immediately!!!
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::DoChangePosition(quint32 id, qreal mx, qreal my)
{
if (rObjects.contains(id))
{
VPointF *point = new VPointF(*VAbstractTool::data.GeometricObject<VPointF>(id));
point->setMx(mx);
point->setMy(my);
VAbstractTool::data.UpdateGObject(id, point);
VSimplePoint *item = qobject_cast<VSimplePoint *>(rObjects.value(id));
SCASSERT(item != nullptr);
item->blockSignals(true);
item->setPos(QPointF(mx, my));
item->blockSignals(false);
item->RefreshLine();
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::UpdateNamePosition(quint32 id)
{
const QSharedPointer<VPointF> point = VAbstractTool::data.GeometricObject<VPointF>(id);
// auto moveLabel = new MoveLabel(doc, point->mx(), point->my(), id, scene());
// connect(moveLabel, &MoveLabel::ChangePosition, this, &VToolSinglePoint::DoChangePosition);
// qApp->getUndoStack()->push(moveLabel);
}
//---------------------------------------------------------------------------------------------------------------------
DestinationItem VToolRotation::CreatePoint(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data)
{
const QSharedPointer<VPointF> point = data->GeometricObject<VPointF>(idItem);
VPointF rotated = point->Rotate(origin, angle, suffix);
rotated.setIdObject(idTool);
DestinationItem item;
item.mx = rotated.mx();
item.my = rotated.my();
item.id = data->AddGObject(new VPointF(rotated));
return item;
}
//---------------------------------------------------------------------------------------------------------------------
template <class Item>
DestinationItem VToolRotation::CreateItem(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data)
{
const QSharedPointer<Item> i = data->GeometricObject<Item>(idItem);
Item rotated = i->Rotate(origin, angle, suffix);
rotated.setIdObject(idTool);
DestinationItem item;
item.mx = INT_MAX;
item.my = INT_MAX;
item.id = data->AddGObject(new Item(rotated));
return item;
}
//---------------------------------------------------------------------------------------------------------------------
DestinationItem VToolRotation::CreateArc(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data)
{
const DestinationItem item = CreateItem<VArc>(idTool, idItem, origin, angle, suffix, data);
data->AddArc(data->GeometricObject<VArc>(item.id), item.id);
return item;
}
//---------------------------------------------------------------------------------------------------------------------
template <class Item>
DestinationItem VToolRotation::CreateCurve(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data)
{
const DestinationItem item = CreateItem<Item>(idTool, idItem, origin, angle, suffix, data);
data->AddCurve(data->GeometricObject<Item>(item.id), item.id);
return item;
}
//---------------------------------------------------------------------------------------------------------------------
template <class Item>
DestinationItem VToolRotation::CreateCurveWithSegments(quint32 idTool, quint32 idItem, const QPointF &origin,
qreal angle, const QString &suffix, VContainer *data)
{
const DestinationItem item = CreateItem<Item>(idTool, idItem, origin, angle, suffix, data);
data->AddCurveWithSegments(data->GeometricObject<Item>(item.id), item.id);
return item;
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::UpdatePoint(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id, qreal mx, qreal my)
{
const QSharedPointer<VPointF> point = data->GeometricObject<VPointF>(idItem);
VPointF rotated = point->Rotate(origin, angle, suffix);
rotated.setIdObject(idTool);
rotated.setMx(mx);
rotated.setMy(my);
data->UpdateGObject(id, new VPointF(rotated));
}
//---------------------------------------------------------------------------------------------------------------------
template <class Item>
void VToolRotation::UpdateItem(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id)
{
const QSharedPointer<Item> i = data->GeometricObject<Item>(idItem);
Item rotated = i->Rotate(origin, angle, suffix);
rotated.setIdObject(idTool);
data->UpdateGObject(id, new Item(rotated));
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::UpdateArc(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id)
{
UpdateItem<VArc>(idTool, idItem, origin, angle, suffix, data, id);
data->AddArc(data->GeometricObject<VArc>(id), id);
}
//---------------------------------------------------------------------------------------------------------------------
template <class Item>
void VToolRotation::UpdateCurve(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id)
{
UpdateItem<Item>(idTool, idItem, origin, angle, suffix, data, id);
data->AddCurve(data->GeometricObject<Item>(id), id);
}
//---------------------------------------------------------------------------------------------------------------------
template <class Item>
void VToolRotation::UpdateCurveWithSegments(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id)
{
UpdateItem<Item>(idTool, idItem, origin, angle, suffix, data, id);
data->AddCurveWithSegments(data->GeometricObject<Item>(id), id);
}
//---------------------------------------------------------------------------------------------------------------------
template <typename T>
void VToolRotation::ShowToolVisualization(bool show)
{
if (show)
{
if (vis == nullptr)
{
AddVisualization<T>();
SetVisualization();
}
else
{
if (T *visual = qobject_cast<T *>(vis))
{
visual->show();
}
}
}
else
{
delete vis;
vis = nullptr;
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::ChangePosition(QGraphicsItem *item, quint32 id, const QPointF &pos)
{
const QPointF p = pos - item->pos();
DoChangePosition(id, p.x(), p.y());
UpdateNamePosition(id);
}
//---------------------------------------------------------------------------------------------------------------------
VSimpleCurve *VToolRotation::InitCurve(quint32 id, VContainer *data, GOType curveType)
{
VSimpleCurve *curve = new VSimpleCurve(id, QColor(baseColor), *data->GetPatternUnit(), &factor);
curve->setParentItem(this);
curve->SetType(curveType);
connect(curve, &VSimpleCurve::Selected, this, &VToolRotation::ObjectSelected);
connect(curve, &VSimpleCurve::ShowContextMenu, this, &VToolRotation::contextMenuEvent);
curve->RefreshGeometry(VAbstractTool::data.GeometricObject<VAbstractCurve>(id));
rObjects.insert(id, curve);
return curve;
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowCurveHover(bool enabled, GOType type)
{
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
if (i.value()->GetType() != GOType::Point)
{
VSimpleCurve *item = qobject_cast<VSimpleCurve *>(i.value());
SCASSERT(item != nullptr);
if (item->GetType() == type)
{
item->setAcceptHoverEvents(enabled);
}
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AllowCurveSelecting(bool enabled, GOType type)
{
QMapIterator<quint32, VAbstractSimple *> i(rObjects);
while (i.hasNext())
{
i.next();
if (i.value()->GetType() != GOType::Point)
{
VSimpleCurve *item = qobject_cast<VSimpleCurve *>(i.value());
SCASSERT(item != nullptr);
if (item->GetType() == type)
{
item->setFlag(QGraphicsItem::ItemIsSelectable, enabled);
}
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VToolRotation::AddSourceObject(VAbstractPattern *doc, QDomElement &domElement, quint32 objId)
{
QDomElement obj = doc->createElement(TagItem);
doc->SetAttribute(obj, AttrIdObject, objId);
domElement.appendChild(obj);
}
//---------------------------------------------------------------------------------------------------------------------
template <typename T>
void VToolRotation::InitRotationToolConnections(VMainGraphicsScene *scene, T *tool)
{
SCASSERT(scene != nullptr);
SCASSERT(tool != nullptr);
InitDrawToolConnections(scene, tool);
QObject::connect(scene, &VMainGraphicsScene::EnablePointItemHover, tool, &T::AllowPointHover);
QObject::connect(scene, &VMainGraphicsScene::EnablePointItemSelection, tool, &T::AllowPointSelecting);
QObject::connect(scene, &VMainGraphicsScene::EnableLabelItemHover, tool, &T::AllowPointLabelHover);
QObject::connect(scene, &VMainGraphicsScene::EnableLabelItemSelection, tool, &T::AllowPointLabelSelecting);
QObject::connect(scene, &VMainGraphicsScene::EnableSplineItemHover, tool, &T::AllowSplineHover);
QObject::connect(scene, &VMainGraphicsScene::EnableSplineItemSelection, tool, &T::AllowSplineSelecting);
QObject::connect(scene, &VMainGraphicsScene::EnableSplinePathItemHover, tool, &T::AllowSplinePathHover);
QObject::connect(scene, &VMainGraphicsScene::EnableSplinePathItemSelection, tool, &T::AllowSplinePathSelecting);
QObject::connect(scene, &VMainGraphicsScene::EnableArcItemHover, tool, &T::AllowArcHover);
QObject::connect(scene, &VMainGraphicsScene::EnableArcItemSelection, tool, &T::AllowArcSelecting);
}

View File

@ -0,0 +1,175 @@
/************************************************************************
**
** @file vtoolrotation.h
** @author Roman Telezhynskyi <dismine(at)gmail.com>
** @date 12 4, 2016
**
** @brief
** @copyright
** This source code is part of the Valentine project, a pattern making
** program, whose allow create and modeling patterns of clothing.
** Copyright (C) 2016 Valentina project
** <https://bitbucket.org/dismine/valentina> All Rights Reserved.
**
** Valentina is free software: you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation, either version 3 of the License, or
** (at your option) any later version.
**
** Valentina is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with Valentina. If not, see <http://www.gnu.org/licenses/>.
**
*************************************************************************/
#ifndef VTOOLROTATION_H
#define VTOOLROTATION_H
#include "../vdrawtool.h"
struct DestinationItem
{
quint32 id;
qreal mx;
qreal my;
};
class VAbstractSimple;
class VSimpleCurve;
class VToolRotation : public VDrawTool, public QGraphicsItem
{
Q_OBJECT
public:
VToolRotation(VAbstractPattern *doc, VContainer *data, quint32 id, quint32 origPointId,
const QString &angle, const QString &suffix, const QVector<quint32> &source,
const QVector<DestinationItem> &destination, const Source &typeCreation,
QGraphicsItem *parent = nullptr);
virtual ~VToolRotation();
virtual void setDialog() Q_DECL_OVERRIDE;
static VToolRotation* Create(DialogTool *dialog, VMainGraphicsScene *scene, VAbstractPattern *doc,
VContainer *data);
static VToolRotation* Create(const quint32 _id, const quint32 &origin, QString &angle, const QString &suffix,
const QVector<quint32> &source, const QVector<DestinationItem> &destination,
VMainGraphicsScene *scene, VAbstractPattern *doc, VContainer *data,
const Document &parse, const Source &typeCreation);
// cppcheck-suppress duplInheritedMember
static const QString TagName;
static const QString TagItem;
static const QString TagSource;
static const QString TagDestination;
virtual int type() const Q_DECL_OVERRIDE {return Type;}
enum { Type = UserType + static_cast<int>(Tool::Rotation)};
virtual QString getTagName() const Q_DECL_OVERRIDE;
void setEnabled(bool enabled);
QString Suffix() const;
virtual void GroupVisibility(quint32 object, bool visible) Q_DECL_OVERRIDE;
virtual void ShowVisualization(bool show) Q_DECL_OVERRIDE;
virtual QRectF boundingRect() const Q_DECL_OVERRIDE;
virtual void paint(QPainter *painter, const QStyleOptionGraphicsItem *option, QWidget *widget) Q_DECL_OVERRIDE;
public slots:
virtual void FullUpdateFromFile() Q_DECL_OVERRIDE;
virtual void AllowHover(bool enabled) Q_DECL_OVERRIDE;
virtual void AllowSelecting(bool enabled) Q_DECL_OVERRIDE;
void AllowPointHover(bool enabled);
void AllowPointSelecting(bool enabled);
void AllowPointLabelHover(bool enabled);
void AllowPointLabelSelecting(bool enabled);
void AllowSplineHover(bool enabled);
void AllowSplineSelecting(bool enabled);
void AllowSplinePathHover(bool enabled);
void AllowSplinePathSelecting(bool enabled);
void AllowArcHover(bool enabled);
void AllowArcSelecting(bool enabled);
virtual void Disable(bool disable, const QString &namePP) Q_DECL_OVERRIDE;
void ObjectSelected(bool selected, quint32 objId);
void DeleteFromLabel();
void LabelChangePosition(const QPointF &pos, quint32 labelId);
protected:
virtual void AddToFile() Q_DECL_OVERRIDE;
virtual void RefreshDataInFile() Q_DECL_OVERRIDE;
virtual void SetVisualization() Q_DECL_OVERRIDE;
virtual void SaveDialog(QDomElement &domElement) Q_DECL_OVERRIDE;
virtual void ReadToolAttributes(const QDomElement &domElement) Q_DECL_OVERRIDE;
virtual void SaveOptions(QDomElement &tag, QSharedPointer<VGObject> &obj) Q_DECL_OVERRIDE;
virtual void contextMenuEvent ( QGraphicsSceneContextMenuEvent * event ) Q_DECL_OVERRIDE;
private slots:
void DoChangePosition(quint32 id, qreal mx, qreal my);
private:
Q_DISABLE_COPY(VToolRotation)
quint32 origPointId;
QString angle;
QString suffix;
QVector<quint32> source;
QVector<DestinationItem> destination;
QMap<quint32, VAbstractSimple *> rObjects;
void UpdateNamePosition(quint32 id);
static DestinationItem CreatePoint(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data);
template <class Item>
static DestinationItem CreateItem(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data);
static DestinationItem CreateArc(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data);
template <class Item>
static DestinationItem CreateCurve(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data);
template <class Item>
static DestinationItem CreateCurveWithSegments(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data);
static void UpdatePoint(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id, qreal mx, qreal my);
template <class Item>
static void UpdateItem(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id);
static void UpdateArc(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id);
template <class Item>
static void UpdateCurve(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id);
template <class Item>
static void UpdateCurveWithSegments(quint32 idTool, quint32 idItem, const QPointF &origin, qreal angle,
const QString &suffix, VContainer *data, quint32 id);
template <typename T>
void ShowToolVisualization(bool show);
void ChangePosition(QGraphicsItem *item, quint32 id, const QPointF &pos);
VSimpleCurve *InitCurve(quint32 id, VContainer *data, GOType curveType);
template <typename T>
static void InitRotationToolConnections(VMainGraphicsScene *scene, T *tool);
void AllowCurveHover(bool enabled, GOType type);
void AllowCurveSelecting(bool enabled, GOType type);
static void AddSourceObject(VAbstractPattern *doc, QDomElement &domElement, quint32 objId);
};
#endif // VTOOLROTATION_H

View File

@ -31,7 +31,6 @@
#include <QDebug>
const QString VAbstractNode::AttrIdObject = QStringLiteral("idObject");
const QString VAbstractNode::AttrIdTool = QStringLiteral("idTool");
//---------------------------------------------------------------------------------------------------------------------

View File

@ -45,7 +45,6 @@ public:
VAbstractNode(VAbstractPattern *doc, VContainer *data, const quint32 &id, const quint32 &idNode,
const quint32 &idTool, QObject *parent = nullptr);
virtual ~VAbstractNode() Q_DECL_OVERRIDE {}
static const QString AttrIdObject;
static const QString AttrIdTool;
virtual void ShowVisualization(bool show) Q_DECL_OVERRIDE;
virtual void incrementReferens() Q_DECL_OVERRIDE;

View File

@ -49,7 +49,8 @@ HEADERS += \
$$PWD/drawTools/toolpoint/tooldoublepoint/vtooltruedarts.h \
$$PWD/drawTools/toolpoint/toolsinglepoint/vtoolpointofintersectioncurves.h \
$$PWD/drawTools/toolcurve/vtoolcubicbezier.h \
$$PWD/drawTools/toolcurve/vtoolcubicbezierpath.h
$$PWD/drawTools/toolcurve/vtoolcubicbezierpath.h \
$$PWD/drawTools/operation/vtoolrotation.h
SOURCES += \
$$PWD/vtooldetail.cpp \
@ -96,4 +97,5 @@ SOURCES += \
$$PWD/drawTools/toolpoint/tooldoublepoint/vtooltruedarts.cpp \
$$PWD/drawTools/toolpoint/toolsinglepoint/vtoolpointofintersectioncurves.cpp \
$$PWD/drawTools/toolcurve/vtoolcubicbezier.cpp \
$$PWD/drawTools/toolcurve/vtoolcubicbezierpath.cpp
$$PWD/drawTools/toolcurve/vtoolcubicbezierpath.cpp \
$$PWD/drawTools/operation/vtoolrotation.cpp

View File

@ -0,0 +1,258 @@
/************************************************************************
**
** @file vistoolrotation.cpp
** @author Roman Telezhynskyi <dismine(at)gmail.com>
** @date 11 4, 2016
**
** @brief
** @copyright
** This source code is part of the Valentine project, a pattern making
** program, whose allow create and modeling patterns of clothing.
** Copyright (C) 2016 Valentina project
** <https://bitbucket.org/dismine/valentina> All Rights Reserved.
**
** Valentina is free software: you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation, either version 3 of the License, or
** (at your option) any later version.
**
** Valentina is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with Valentina. If not, see <http://www.gnu.org/licenses/>.
**
*************************************************************************/
#include "vistoolrotation.h"
#include "../vgeometry/vpointf.h"
#include "../vgeometry/varc.h"
#include "../vgeometry/vellipticalarc.h"
#include "../vgeometry/vspline.h"
#include "../vgeometry/vsplinepath.h"
#include "../vgeometry/vcubicbezier.h"
#include "../vgeometry/vcubicbezierpath.h"
#include "../vpatterndb/vcontainer.h"
#include <QGraphicsScene>
//---------------------------------------------------------------------------------------------------------------------
VisToolRotation::VisToolRotation(const VContainer *data, QGraphicsItem *parent)
: VisLine(data, parent),
angle(INT_MIN),
objects(),
point(nullptr),
xAxis(nullptr),
supportColor2(Qt::darkGreen),
points(),
curves()
{
point = InitPoint(supportColor2, this);
xAxis = InitItem<QGraphicsLineItem>(supportColor2, this);
}
//---------------------------------------------------------------------------------------------------------------------
VisToolRotation::~VisToolRotation()
{
qDeleteAll(points);
qDeleteAll(curves);
}
//---------------------------------------------------------------------------------------------------------------------
#if defined(Q_CC_GNU)
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wswitch-default"
#endif
void VisToolRotation::RefreshGeometry()
{
if (objects.isEmpty())
{
return;
}
if (object1Id != NULL_ID)
{
const QPointF origin = Visualization::data->GeometricObject<VPointF>(object1Id)->toQPointF();
DrawPoint(point, origin, supportColor2);
QLineF rLine;
if (VFuzzyComparePossibleNulls(angle, INT_MIN))
{
rLine = QLineF(origin, Visualization::scenePos);
if (QGuiApplication::keyboardModifiers() == Qt::ShiftModifier)
{
rLine.setAngle(CorrectAngle(rLine.angle()));
}
rLine.setP2(Ray(origin, rLine.angle()));
}
else
{
rLine = QLineF(origin, Ray(origin, angle));
}
if (mode == Mode::Creation)
{
DrawLine(this, rLine, supportColor2, Qt::DashLine);
DrawLine(xAxis, QLineF(origin, Ray(origin, 0)), supportColor2, Qt::DashLine);
}
Visualization::toolTip = tr("Rotating angle = %1°, <b>Shift</b> - sticking angle, "
"<b>Mouse click</b> - finish creation").arg(rLine.angle());
int iPoint = -1;
int iCurve = -1;
for (int i = 0; i < objects.size(); ++i)
{
const quint32 id = objects.at(i);
const QSharedPointer<VGObject> obj = Visualization::data->GetGObject(id);
// This check helps to find missed objects in the switch
Q_STATIC_ASSERT_X(static_cast<int>(GOType::Unknown) == 7, "Not all objects was handled.");
switch(static_cast<GOType>(obj->getType()))
{
case GOType::Point:
{
const QSharedPointer<VPointF> p = Visualization::data->GeometricObject<VPointF>(id);
++iPoint;
QGraphicsEllipseItem *point = GetPoint(iPoint);
DrawPoint(point, p->toQPointF(), supportColor);
++iPoint;
point = GetPoint(iPoint);
DrawPoint(point, p->Rotate(origin, angle).toQPointF(), supportColor);
break;
}
case GOType::Arc:
{
iCurve = AddCurve<VArc>(origin, id, iCurve);
break;
}
case GOType::EllipticalArc:
{
iCurve = AddCurve<VEllipticalArc>(origin, id, iCurve);
break;
}
case GOType::Spline:
{
iCurve = AddCurve<VSpline>(origin, id, iCurve);
break;
}
case GOType::SplinePath:
{
iCurve = AddCurve<VSplinePath>(origin, id, iCurve);
break;
}
case GOType::CubicBezier:
{
iCurve = AddCurve<VCubicBezier>(origin, id, iCurve);
break;
}
case GOType::CubicBezierPath:
{
iCurve = AddCurve<VCubicBezierPath>(origin, id, iCurve);
break;
}
case GOType::Unknown:
break;
}
}
}
}
#if defined(Q_CC_GNU)
#pragma GCC diagnostic pop
#endif
//---------------------------------------------------------------------------------------------------------------------
void VisToolRotation::SetObjects(QVector<quint32> objects)
{
this->objects = objects;
}
//---------------------------------------------------------------------------------------------------------------------
void VisToolRotation::SetOriginPointId(quint32 value)
{
object1Id = value;
}
//---------------------------------------------------------------------------------------------------------------------
QString VisToolRotation::Angle() const
{
return QString::number(line().angle());
}
//---------------------------------------------------------------------------------------------------------------------
void VisToolRotation::SetAngle(const QString &expression)
{
angle = FindVal(expression, Visualization::data->PlainVariables());
}
//---------------------------------------------------------------------------------------------------------------------
void VisToolRotation::VisualMode(const quint32 &pointId)
{
Q_UNUSED(pointId);
VMainGraphicsScene *scene = qobject_cast<VMainGraphicsScene *>(qApp->getCurrentScene());
SCASSERT(scene != nullptr);
Visualization::scenePos = scene->getScenePos();
RefreshGeometry();
AddOnScene();
}
//---------------------------------------------------------------------------------------------------------------------
QGraphicsEllipseItem *VisToolRotation::GetPoint(quint32 i)
{
if (not points.isEmpty() && static_cast<quint32>(points.size() - 1) >= i)
{
return points.at(static_cast<int>(i));
}
else
{
auto point = InitPoint(supportColor, this);
points.append(point);
return point;
}
return nullptr;
}
//---------------------------------------------------------------------------------------------------------------------
QGraphicsPathItem *VisToolRotation::GetCurve(quint32 i)
{
if (not curves.isEmpty() && static_cast<quint32>(curves.size() - 1) >= i)
{
return curves.at(static_cast<int>(i));
}
else
{
auto curve = InitItem<QGraphicsPathItem>(supportColor, this);
curves.append(curve);
return curve;
}
return nullptr;
}
//---------------------------------------------------------------------------------------------------------------------
template <class Item>
int VisToolRotation::AddCurve(const QPointF &origin, quint32 id, int i)
{
const QSharedPointer<Item> curve = Visualization::data->GeometricObject<Item>(id);
++i;
QGraphicsPathItem *path = GetCurve(i);
DrawPath(path, curve->GetPath(PathDirection::Hide), mainColor, Qt::SolidLine, Qt::RoundCap);
++i;
path = GetCurve(i);
const Item rotated = curve->Rotate(origin, angle);
DrawPath(path, rotated.GetPath(PathDirection::Hide), mainColor, Qt::SolidLine, Qt::RoundCap);
return i;
}

View File

@ -0,0 +1,71 @@
/************************************************************************
**
** @file vistoolrotation.h
** @author Roman Telezhynskyi <dismine(at)gmail.com>
** @date 11 4, 2016
**
** @brief
** @copyright
** This source code is part of the Valentine project, a pattern making
** program, whose allow create and modeling patterns of clothing.
** Copyright (C) 2016 Valentina project
** <https://bitbucket.org/dismine/valentina> All Rights Reserved.
**
** Valentina is free software: you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation, either version 3 of the License, or
** (at your option) any later version.
**
** Valentina is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with Valentina. If not, see <http://www.gnu.org/licenses/>.
**
*************************************************************************/
#ifndef VISTOOLROTATION_H
#define VISTOOLROTATION_H
#include "visline.h"
class VisToolRotation : public VisLine
{
Q_OBJECT
public:
explicit VisToolRotation(const VContainer *data, QGraphicsItem *parent = nullptr);
virtual ~VisToolRotation();
virtual void RefreshGeometry() Q_DECL_OVERRIDE;
void SetObjects(QVector<quint32> objects);
void SetOriginPointId(quint32 value);
QString Angle() const;
void SetAngle(const QString &expression);
virtual void VisualMode(const quint32 &pointId = NULL_ID) Q_DECL_OVERRIDE;
virtual int type() const Q_DECL_OVERRIDE {return Type;}
enum { Type = UserType + static_cast<int>(Vis::ToolRotation)};
private:
Q_DISABLE_COPY(VisToolRotation)
qreal angle;
QVector<quint32> objects;
QGraphicsEllipseItem *point;
QGraphicsLineItem *xAxis;
QColor supportColor2;
QVector<QGraphicsEllipseItem *> points;
QVector<QGraphicsPathItem *> curves;
QGraphicsEllipseItem * GetPoint(quint32 i);
QGraphicsPathItem * GetCurve(quint32 i);
template <class Item>
int AddCurve(const QPointF &origin, quint32 id, int i);
};
#endif // VISTOOLROTATION_H

View File

@ -32,7 +32,8 @@ HEADERS += \
$$PWD/path/vistoolarcwithlength.h \
$$PWD/path/vistoolpointofintersectioncurves.h \
$$PWD/path/vistoolcubicbezier.h \
$$PWD/path/vistoolcubicbezierpath.h
$$PWD/path/vistoolcubicbezierpath.h \
visualization/line/vistoolrotation.h
SOURCES += \
$$PWD/visualization.cpp \
@ -65,4 +66,5 @@ SOURCES += \
$$PWD/path/vistoolarcwithlength.cpp \
$$PWD/path/vistoolpointofintersectioncurves.cpp \
$$PWD/path/vistoolcubicbezier.cpp \
$$PWD/path/vistoolcubicbezierpath.cpp
$$PWD/path/vistoolcubicbezierpath.cpp \
visualization/line/vistoolrotation.cpp

View File

@ -28,16 +28,32 @@
#include "vabstractsimple.h"
#include <QGraphicsItem>
#include <QGraphicsSceneContextMenuEvent>
//---------------------------------------------------------------------------------------------------------------------
VAbstractSimple::VAbstractSimple(quint32 id, const QColor &currentColor, Unit patternUnit, qreal *factor,
QObject *parent)
:QObject(parent), id (id), factor(factor), currentColor(currentColor), enabled(true), patternUnit(patternUnit)
: QObject(parent),
id (id),
factor(factor),
currentColor(currentColor),
enabled(true),
patternUnit(patternUnit),
selectionType(SelectionType::ByMouseRelease),
type(GOType::Unknown)
{}
//---------------------------------------------------------------------------------------------------------------------
VAbstractSimple::~VAbstractSimple()
{}
//---------------------------------------------------------------------------------------------------------------------
void VAbstractSimple::ToolSelectionType(const SelectionType &type)
{
selectionType = type;
}
//---------------------------------------------------------------------------------------------------------------------
QColor VAbstractSimple::CorrectColor(const QColor &color) const
{
@ -50,3 +66,28 @@ QColor VAbstractSimple::CorrectColor(const QColor &color) const
return Qt::gray;
}
}
//---------------------------------------------------------------------------------------------------------------------
// cppcheck-suppress unusedFunction
QColor VAbstractSimple::GetCurrentColor() const
{
return currentColor;
}
//---------------------------------------------------------------------------------------------------------------------
void VAbstractSimple::ContextMenu(QGraphicsSceneContextMenuEvent *event)
{
emit ShowContextMenu(event);
}
//---------------------------------------------------------------------------------------------------------------------
GOType VAbstractSimple::GetType() const
{
return type;
}
//---------------------------------------------------------------------------------------------------------------------
void VAbstractSimple::SetType(const GOType &value)
{
type = value;
}

View File

@ -33,6 +33,11 @@
#include <QPen>
#include <QColor>
#include "../vmisc/def.h"
#include "../vgeometry/vgeometrydef.h"
#include "../ifc/ifcdef.h"
class QGraphicsSceneContextMenuEvent;
class QGraphicsItem;
class VAbstractSimple : public QObject
{
@ -40,9 +45,22 @@ class VAbstractSimple : public QObject
public:
VAbstractSimple(quint32 id, const QColor &currentColor, Unit patternUnit, qreal *factor = nullptr,
QObject *parent = 0);
virtual ~VAbstractSimple() Q_DECL_OVERRIDE;
virtual ~VAbstractSimple();
virtual void ChangedActivDraw(const bool &flag)=0;
virtual void ToolSelectionType(const SelectionType &type);
QColor GetCurrentColor() const;
virtual void SetEnabled(bool enabled) { Q_UNUSED(enabled); }
GOType GetType() const;
void SetType(const GOType &value);
signals:
void ShowContextMenu(QGraphicsSceneContextMenuEvent * event);
public slots:
void ContextMenu(QGraphicsSceneContextMenuEvent * event);
protected:
/** @brief id spline id. */
@ -58,10 +76,20 @@ protected:
Unit patternUnit;
SelectionType selectionType;
GOType type;
QColor CorrectColor(const QColor &color) const;
template <class T>
void SetPen(T *item, const QColor &color, qreal width);
void SetPen(T *item, const QColor &color, qreal width);
template <class T>
void SimpleChangedActivDraw(T *item, const bool &flag);
template <class T>
void SetSimpleCurrentColor(T *item, const QColor &value);
private:
Q_DISABLE_COPY(VAbstractSimple)
@ -81,4 +109,21 @@ void VAbstractSimple::SetPen(T *item, const QColor &color, qreal width)
}
}
//---------------------------------------------------------------------------------------------------------------------
template <class T>
void VAbstractSimple::SimpleChangedActivDraw(T *item, const bool &flag)
{
enabled = flag;
item->setEnabled(enabled);
SetPen(item, currentColor, WidthHairLine(patternUnit));
}
//---------------------------------------------------------------------------------------------------------------------
template <class T>
void VAbstractSimple::SetSimpleCurrentColor(T *item, const QColor &value)
{
currentColor = value;
SetPen(item, CorrectColor(currentColor), item->pen().widthF());
}
#endif // VABSTRACTSIMPLE_H

View File

@ -0,0 +1,133 @@
/************************************************************************
**
** @file vsimplecurve.cpp
** @author Roman Telezhynskyi <dismine(at)gmail.com>
** @date 7 5, 2016
**
** @brief
** @copyright
** This source code is part of the Valentine project, a pattern making
** program, whose allow create and modeling patterns of clothing.
** Copyright (C) 2016 Valentina project
** <https://bitbucket.org/dismine/valentina> All Rights Reserved.
**
** Valentina is free software: you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation, either version 3 of the License, or
** (at your option) any later version.
**
** Valentina is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with Valentina. If not, see <http://www.gnu.org/licenses/>.
**
*************************************************************************/
#include "vsimplecurve.h"
#include "../ifc/ifcdef.h"
#include "../vgeometry/vabstractcurve.h"
#include <QDebug>
#include <QGraphicsSceneMouseEvent>
//---------------------------------------------------------------------------------------------------------------------
VSimpleCurve::VSimpleCurve(quint32 id, const QColor &currentColor, Unit patternUnit, qreal *factor, QObject *parent)
: VAbstractSimple(id, currentColor, patternUnit, factor, parent),
QGraphicsPathItem(),
m_curve()
{
this->setBrush(QBrush(Qt::NoBrush));
SetPen(this, currentColor, WidthHairLine(patternUnit));
this->setAcceptHoverEvents(true);
}
//---------------------------------------------------------------------------------------------------------------------
VSimpleCurve::~VSimpleCurve()
{
}
//---------------------------------------------------------------------------------------------------------------------
void VSimpleCurve::SetCurrentColor(const QColor &value)
{
SetSimpleCurrentColor(this, value);
}
//---------------------------------------------------------------------------------------------------------------------
void VSimpleCurve::ChangedActivDraw(bool flag)
{
SimpleChangedActivDraw(this, flag);
}
//---------------------------------------------------------------------------------------------------------------------
void VSimpleCurve::RefreshGeometry(const QSharedPointer<VAbstractCurve> &curve)
{
m_curve = curve;
if (not curve.isNull())
{
setPath(curve->GetPath(PathDirection::Hide));
}
else
{
qWarning() << tr("VSimpleCurve::RefreshGeometry: pointer to curve is null.");
}
}
//---------------------------------------------------------------------------------------------------------------------
void VSimpleCurve::CurveChoosed()
{
emit Choosed(id);
}
//---------------------------------------------------------------------------------------------------------------------
void VSimpleCurve::CurveSelected(bool selected)
{
emit Selected(selected, id);
}
//---------------------------------------------------------------------------------------------------------------------
void VSimpleCurve::mousePressEvent(QGraphicsSceneMouseEvent *event)
{
// Special for not selectable item first need to call standard mousePressEvent then accept event
QGraphicsPathItem::mousePressEvent(event);
if (selectionType == SelectionType::ByMouseRelease)
{
event->accept();// Special for not selectable item first need to call standard mousePressEvent then accept event
}
else
{
if (event->button() == Qt::LeftButton)
{
emit Choosed(id);
}
}
}
//---------------------------------------------------------------------------------------------------------------------
void VSimpleCurve::mouseReleaseEvent(QGraphicsSceneMouseEvent *event)
{
if (selectionType == SelectionType::ByMouseRelease)
{
if (event->button() == Qt::LeftButton)
{
emit Choosed(id);
}
}
QGraphicsPathItem::mouseReleaseEvent(event);
}
//---------------------------------------------------------------------------------------------------------------------
void VSimpleCurve::hoverEnterEvent(QGraphicsSceneHoverEvent *event)
{
SetPen(this, currentColor, WidthMainLine(patternUnit));
QGraphicsPathItem::hoverEnterEvent(event);
}
//---------------------------------------------------------------------------------------------------------------------
void VSimpleCurve::hoverLeaveEvent(QGraphicsSceneHoverEvent *event)
{
SetPen(this, currentColor, WidthHairLine(patternUnit));
QGraphicsPathItem::hoverLeaveEvent(event);
}

View File

@ -0,0 +1,78 @@
/************************************************************************
**
** @file vsimplecurve.h
** @author Roman Telezhynskyi <dismine(at)gmail.com>
** @date 7 5, 2016
**
** @brief
** @copyright
** This source code is part of the Valentine project, a pattern making
** program, whose allow create and modeling patterns of clothing.
** Copyright (C) 2016 Valentina project
** <https://bitbucket.org/dismine/valentina> All Rights Reserved.
**
** Valentina is free software: you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation, either version 3 of the License, or
** (at your option) any later version.
**
** Valentina is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
**
** You should have received a copy of the GNU General Public License
** along with Valentina. If not, see <http://www.gnu.org/licenses/>.
**
*************************************************************************/
#ifndef VSIMPLECURVE_H
#define VSIMPLECURVE_H
#include "vabstractsimple.h"
#include <QGraphicsPathItem>
class VAbstractCurve;
class VSimpleCurve : public VAbstractSimple, public QGraphicsPathItem
{
Q_OBJECT
public:
VSimpleCurve(quint32 id, const QColor &currentColor, Unit patternUnit, qreal *factor = nullptr,
QObject *parent = nullptr);
virtual ~VSimpleCurve();
virtual int type() const Q_DECL_OVERRIDE {return Type;}
enum { Type = UserType + static_cast<int>(Vis::SimpleCurve)};
void SetCurrentColor(const QColor &value);
void ChangedActivDraw(bool flag);
void RefreshGeometry(const QSharedPointer<VAbstractCurve> &curve);
signals:
/**
* @brief Choosed send id when clicked.
* @param id point id.
*/
void Choosed(quint32 id);
void Selected(bool selected, quint32 id);
void Delete();
public slots:
void CurveChoosed();
void CurveSelected(bool selected);
protected:
virtual void mousePressEvent( QGraphicsSceneMouseEvent * event ) Q_DECL_OVERRIDE;
virtual void mouseReleaseEvent ( QGraphicsSceneMouseEvent * event ) Q_DECL_OVERRIDE;
virtual void hoverEnterEvent ( QGraphicsSceneHoverEvent * event ) Q_DECL_OVERRIDE;
virtual void hoverLeaveEvent ( QGraphicsSceneHoverEvent * event ) Q_DECL_OVERRIDE;
private:
Q_DISABLE_COPY(VSimpleCurve)
QSharedPointer<VAbstractCurve> m_curve;
};
#endif // VSIMPLECURVE_H

View File

@ -39,8 +39,7 @@
//---------------------------------------------------------------------------------------------------------------------
VSimplePoint::VSimplePoint(quint32 id, const QColor &currentColor, Unit patternUnit, qreal *factor, QObject *parent)
:VAbstractSimple(id, currentColor, patternUnit, factor, parent), QGraphicsEllipseItem(),
radius(ToPixel(DefPointRadius/*mm*/, Unit::Mm)), namePoint(nullptr), lineName(nullptr),
selectionType(SelectionType::ByMouseRelease)
radius(ToPixel(DefPointRadius/*mm*/, Unit::Mm)), namePoint(nullptr), lineName(nullptr)
{
namePoint = new VGraphicsSimpleTextItem(this);
connect(namePoint, &VGraphicsSimpleTextItem::ShowContextMenu, this, &VSimplePoint::ContextMenu);
@ -59,11 +58,15 @@ VSimplePoint::~VSimplePoint()
{}
//---------------------------------------------------------------------------------------------------------------------
void VSimplePoint::ChangedActivDraw(const bool &flag)
void VSimplePoint::SetCurrentColor(const QColor &value)
{
enabled = flag;
setEnabled(enabled);
SetPen(this, currentColor, WidthHairLine(patternUnit));
SetSimpleCurrentColor(this, value);
}
//---------------------------------------------------------------------------------------------------------------------
void VSimplePoint::ChangedActivDraw(bool flag)
{
SimpleChangedActivDraw(this, flag);
}
//---------------------------------------------------------------------------------------------------------------------
@ -150,7 +153,7 @@ void VSimplePoint::AllowLabelSelecting(bool enabled)
//---------------------------------------------------------------------------------------------------------------------
void VSimplePoint::ToolSelectionType(const SelectionType &type)
{
selectionType = type;
VAbstractSimple::ToolSelectionType(type);
namePoint->LabelSelectionType(type);
}
@ -175,13 +178,7 @@ void VSimplePoint::PointSelected(bool selected)
//---------------------------------------------------------------------------------------------------------------------
void VSimplePoint::ChangedPosition(const QPointF &pos)
{
emit NameChangedPosition(pos);
}
//---------------------------------------------------------------------------------------------------------------------
void VSimplePoint::ContextMenu(QGraphicsSceneContextMenuEvent *event)
{
emit ShowContextMenu(event);
emit NameChangedPosition(pos, id);
}
//---------------------------------------------------------------------------------------------------------------------
@ -242,17 +239,3 @@ QVariant VSimplePoint::itemChange(QGraphicsItem::GraphicsItemChange change, cons
return QGraphicsEllipseItem::itemChange(change, value);
}
//---------------------------------------------------------------------------------------------------------------------
// cppcheck-suppress unusedFunction
QColor VSimplePoint::GetCurrentColor() const
{
return currentColor;
}
//---------------------------------------------------------------------------------------------------------------------
void VSimplePoint::SetCurrentColor(const QColor &value)
{
currentColor = value;
SetPen(this, CorrectColor(currentColor), pen().widthF());
}

View File

@ -44,21 +44,19 @@ public:
QObject *parent = nullptr);
virtual ~VSimplePoint() Q_DECL_OVERRIDE;
virtual void ChangedActivDraw(const bool &flag) Q_DECL_OVERRIDE;
virtual int type() const Q_DECL_OVERRIDE {return Type;}
enum { Type = UserType + static_cast<int>(Vis::SimplePoint)};
void ChangedActivDraw(bool flag);
void RefreshLine();
void RefreshGeometry(const VPointF &point);
void SetEnabled(bool enabled);
virtual void SetEnabled(bool enabled) Q_DECL_OVERRIDE;
void EnableToolMove(bool move);
void AllowLabelHover(bool enabled);
void AllowLabelSelecting(bool enabled);
void ToolSelectionType(const SelectionType &type);
virtual void ToolSelectionType(const SelectionType &type) Q_DECL_OVERRIDE;
QColor GetCurrentColor() const;
void SetCurrentColor(const QColor &value);
void SetCurrentColor(const QColor &value);
signals:
/**
* @brief Choosed send id when clicked.
@ -66,16 +64,14 @@ signals:
*/
void Choosed(quint32 id);
void Selected(bool selected, quint32 id);
void ShowContextMenu(QGraphicsSceneContextMenuEvent * event);
void Delete();
void NameChangedPosition(const QPointF &pos);
void NameChangedPosition(const QPointF &pos, quint32 id);
public slots:
void DeleteFromLabel();
void PointChoosed();
void PointSelected(bool selected);
void ChangedPosition(const QPointF &pos);
void ContextMenu(QGraphicsSceneContextMenuEvent * event);
protected:
virtual void mousePressEvent( QGraphicsSceneMouseEvent * event ) Q_DECL_OVERRIDE;
@ -95,9 +91,6 @@ private:
/** @brief lineName line what we see if label moved too away from point. */
QGraphicsLineItem *lineName;
SelectionType selectionType;
};
#endif // VSIMPLEPOINT_H

View File

@ -9,7 +9,8 @@ SOURCES += \
$$PWD/vgraphicssimpletextitem.cpp \
$$PWD/vsimplepoint.cpp \
$$PWD/vabstractsimple.cpp \
$$PWD/vnobrushscalepathitem.cpp
$$PWD/vnobrushscalepathitem.cpp \
$$PWD/vsimplecurve.cpp
win32-msvc*:SOURCES += $$PWD/stable.cpp
@ -22,4 +23,5 @@ HEADERS += \
$$PWD/vgraphicssimpletextitem.h \
$$PWD/vsimplepoint.h \
$$PWD/vabstractsimple.h \
$$PWD/vnobrushscalepathitem.h
$$PWD/vnobrushscalepathitem.h \
$$PWD/vsimplecurve.h