This commit is contained in:
Roman Telezhynskyi 2021-05-11 13:16:21 +03:00
parent fd2a69451f
commit 8245aa907c
20 changed files with 2104 additions and 227 deletions

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4901,6 +4909,10 @@ Apply settings anyway?</source>
<source>yyyy-MM-dd</source>
<translation type="obsolete">yyyy-MM-dd</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6098,6 +6110,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9561,6 +9589,10 @@ Do you want to save your changes?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10718,6 +10750,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -14229,6 +14265,18 @@ Do you want to save your changes?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14717,6 +14765,10 @@ Do you want to save your changes?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14963,6 +15015,26 @@ Do you want to save your changes?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Length</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Angle</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCut</name>
@ -15845,6 +15917,26 @@ Do you want to save your changes?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4863,6 +4871,10 @@ Přesto použít nastavení?</translation>
<source>Label language:</source>
<translation>Jazyk popisu:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6048,6 +6060,22 @@ Přesto použít nastavení?</translation>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9349,6 +9377,10 @@ Chcete uložit své změny?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10467,6 +10499,10 @@ Tato volba se projeví po opětovném spuštění.</translation>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13786,6 +13822,18 @@ Chcete uložit změny?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14270,6 +14318,10 @@ Chcete uložit změny?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14520,6 +14572,26 @@ Chcete uložit změny?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation>Chyba při výpočtu bodu &apos;%1&apos;. Není tu žádný průsečík s křivkou &apos;%2&apos; a osou skrze bod &apos;%3&apos; s úhlem %4°</translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Délka</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Úhel</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Popis</translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15395,6 +15467,26 @@ Chcete uložit změny?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation>Chyba při výpočtu bodu &apos;%1&apos;. Křivky &apos;%2&apos; a &apos;%3&apos; nemají žádný průsečík</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Popis</translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4862,6 +4870,10 @@ Einstellungen trotzdem anwenden?</translation>
<source>Label language:</source>
<translation>Bezeichnungs Sprache:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6047,6 +6059,22 @@ Einstellungen trotzdem anwenden?</translation>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9346,6 +9374,10 @@ Sollen die Änderungen gespeichert werden?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10464,6 +10496,10 @@ Diese Option wird nach einem Neustart aktiv.</translation>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13780,6 +13816,18 @@ Do you want to save your changes?</source>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14264,6 +14312,10 @@ Do you want to save your changes?</source>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14510,6 +14562,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Länge</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Winkel</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Bezeichnung</translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15353,6 +15425,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Bezeichnung</translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1192,6 +1192,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4786,6 +4794,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation>Γλώσσα ετικέτας:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -5963,6 +5975,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9198,6 +9226,10 @@ Do you want to save your changes?</source>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10232,6 +10264,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QmuParser</name>
@ -13305,6 +13341,18 @@ Do you want to save your changes?</source>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -13789,6 +13837,10 @@ Do you want to save your changes?</source>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14023,6 +14075,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Μήκος</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Γωνία</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -14890,6 +14962,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4861,6 +4869,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation>Label language:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6046,6 +6058,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9345,6 +9373,10 @@ Do you want to save your changes?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10462,6 +10494,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13781,6 +13817,18 @@ Do you want to save your changes?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14265,6 +14313,10 @@ Do you want to save your changes?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14511,6 +14563,26 @@ Do you want to save your changes?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Length</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Angle</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15386,6 +15458,26 @@ Do you want to save your changes?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4861,6 +4869,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation>Label language:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6046,6 +6058,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9345,6 +9373,10 @@ Do you want to save your changes?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10462,6 +10494,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13781,6 +13817,18 @@ Do you want to save your changes?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14265,6 +14313,10 @@ Do you want to save your changes?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14511,6 +14563,26 @@ Do you want to save your changes?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Length</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Angle</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15386,6 +15458,26 @@ Do you want to save your changes?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4861,6 +4869,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation>Label language:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6046,6 +6058,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9345,6 +9373,10 @@ Do you want to save your changes?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10462,6 +10494,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13781,6 +13817,18 @@ Do you want to save your changes?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14265,6 +14313,10 @@ Do you want to save your changes?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14511,6 +14563,26 @@ Do you want to save your changes?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Length</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Angle</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15386,6 +15458,26 @@ Do you want to save your changes?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation>Notas</translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4862,6 +4870,10 @@ Aplicar características de todos modos?</translation>
<source>Label language:</source>
<translation>Idioma de etiquetas:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6047,6 +6059,22 @@ Aplicar características de todos modos?</translation>
<source>Notes</source>
<translation>Notas</translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9347,6 +9375,10 @@ el patrón.</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10465,6 +10497,10 @@ Esta opción surtirá efecto después de reiniciar.</translation>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13784,6 +13820,18 @@ Quieres guardar los cambios?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14268,6 +14316,10 @@ Quieres guardar los cambios?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation>Valor para medida final &apos;%1&apos; es infinito o no es un numero. Por favor, revise sus cálculos.</translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14518,6 +14570,26 @@ Quieres guardar los cambios?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation>Error calculando el punto &apos;%1&apos;. No hay intersección con la curva &apos;%2&apos; y el eje a través del punto &apos;%3&apos; con el angulo %4°</translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Longitud</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Etiqueta</translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15393,6 +15465,26 @@ Quieres guardar los cambios?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation>Error calculando el punto &apos;%1&apos;. Las curvas &apos;%2&apos; y &apos;%3&apos; no tienen punto de intersección</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Etiqueta</translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1072,6 +1072,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4278,6 +4286,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -5387,6 +5399,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -8353,6 +8381,10 @@ Haluatko tallentaa muutokset?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -9300,6 +9332,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QmuParser</name>
@ -12246,6 +12282,18 @@ Do you want to save your changes?</source>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -12730,6 +12778,10 @@ Do you want to save your changes?</source>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -12949,6 +13001,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Pituus</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Kulma</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -13724,6 +13796,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation>Remarques</translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4858,6 +4866,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation>Langue:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6043,6 +6055,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation>Remarques</translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9342,6 +9370,10 @@ Voulez-vous sauvegarder les changements?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10451,6 +10483,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13760,6 +13796,18 @@ Voulez-vous enregistrer les changements?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14244,6 +14292,10 @@ Voulez-vous enregistrer les changements?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14490,6 +14542,26 @@ Voulez-vous enregistrer les changements?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Longueur</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Angle</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Étiquette</translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15353,6 +15425,26 @@ Voulez-vous enregistrer les changements?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Étiquette</translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -805,6 +805,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -3731,6 +3739,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPiecePath</name>
@ -4661,6 +4673,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -7378,6 +7406,10 @@ Do you want to save your changes?</source>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -8239,6 +8271,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QmuParser</name>
@ -10967,6 +11003,18 @@ Do you want to save your changes?</source>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -11432,6 +11480,10 @@ Do you want to save your changes?</source>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -11647,6 +11699,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">אורך</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -12382,6 +12454,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1016,6 +1016,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4030,6 +4038,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPiecePath</name>
@ -4984,6 +4996,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -7716,6 +7744,10 @@ Apakah anda ingin menyimpan perubahan anda?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -8577,6 +8609,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QmuParser</name>
@ -11351,6 +11387,18 @@ Do you want to save your changes?</source>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -11816,6 +11864,10 @@ Do you want to save your changes?</source>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -12031,6 +12083,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">panjang</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">sudut</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -12778,6 +12850,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1208,6 +1208,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4855,6 +4863,10 @@ Applicare la configurazione comunque?</translation>
<source>Label language:</source>
<translation>Lingua etichetta:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6040,6 +6052,22 @@ Applicare la configurazione comunque?</translation>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9335,6 +9363,10 @@ Vuoi salvare i cambiamenti?</translation>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10307,7 +10339,7 @@ Questa opzione sarà effettiva dopo il riavvio del programma.</translation>
</message>
<message>
<source>Cannot get tokens from formula &apos;%1&apos;. Parser error: %2.</source>
<translation type="unfinished"></translation>
<translation>Impossibile ottenere risultato dalla formula &apos;%1&apos;. Errore analizzato: %2.</translation>
</message>
<message>
<source>Error</source>
@ -10453,6 +10485,10 @@ Questa opzione sarà effettiva dopo il riavvio del programma.</translation>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -12775,31 +12811,31 @@ Vuoi salvare le tue modifiche?</translation>
<name>VAbstractTool</name>
<message>
<source>black</source>
<translation>nero</translation>
<translation>Nero</translation>
</message>
<message>
<source>green</source>
<translation>verde</translation>
<translation>Verde</translation>
</message>
<message>
<source>blue</source>
<translation>blu</translation>
<translation>Blu</translation>
</message>
<message>
<source>dark red</source>
<translation>rosso scuro</translation>
<translation>Rosso scuro</translation>
</message>
<message>
<source>dark green</source>
<translation>verde scuro</translation>
<translation>Verde scuro</translation>
</message>
<message>
<source>dark blue</source>
<translation>blu scuro</translation>
<translation>Blu scuro</translation>
</message>
<message>
<source>yellow</source>
<translation>giallo</translation>
<translation>Giallo</translation>
</message>
<message>
<source>Confirm deletion</source>
@ -13697,6 +13733,18 @@ Vuoi salvare le tue modifiche?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14181,6 +14229,10 @@ Vuoi salvare le tue modifiche?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14423,6 +14475,26 @@ Vuoi salvare le tue modifiche?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Lunghezza</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Etichetta</translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15290,6 +15362,26 @@ Vuoi salvare le tue modifiche?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation>Errore di calcolazione del punto &apos;%1&apos;. Curve &apos;%2&apos; e &apos;%3&apos; non hanno alcun punto d&apos;intersezione</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Etichetta</translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation>Notities</translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished">Alias1:</translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished">Alias2:</translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4863,6 +4871,10 @@ Toch de instellingen aanpassen?</translation>
<source>Label language:</source>
<translation>Taal label:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6048,6 +6060,22 @@ Toch de instellingen aanpassen?</translation>
<source>Notes</source>
<translation>Notities</translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished">Alias1:</translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished">Alias2:</translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9346,6 +9374,10 @@ Do you want to save your changes?</source>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation>Kan dimensie C niet instellen. Bestand was niet geopend.</translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10464,6 +10496,10 @@ Deze optie wordt actief na een herstart..</translation>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13783,6 +13819,18 @@ Wil je deze veranderingen opslaan?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation>Kan bestand &apos;%1&apos; niet opslaan. Fout %2.</translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14267,6 +14315,10 @@ Wil je deze veranderingen opslaan?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation>Waarde voor de definitieve maten &apos;%1&apos; is oneindig of NaN. Controlleer uw berekeningen.</translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14517,6 +14569,26 @@ Wil je deze veranderingen opslaan?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation>Fout berekenen punt &apos;%1&apos;. Er is geen kruispunt met de kromme &apos;%2&apos; en de aslijn door punt &apos;%3&apos; met hoek %4°</translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Lengte</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Hoek</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Label</translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15392,6 +15464,26 @@ Wil je deze veranderingen opslaan?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation>Fout bij berekenen van punt &apos;%1&apos;. Krommen &apos;%2&apos; en &apos;%3&apos; hebben geen kruispunt</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Label</translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished">Odnośnik1:</translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished">Odnośnik2:</translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4534,6 +4542,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation>Język etykiet:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -5567,6 +5579,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished">Odnośnik1:</translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished">Odnośnik2:</translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -8490,6 +8518,10 @@ Do you want to save your changes?</source>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -9467,6 +9499,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QmuParser</name>
@ -12472,6 +12508,18 @@ Czy chcesz zapisać zmiany?</translation>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -12948,6 +12996,10 @@ Czy chcesz zapisać zmiany?</translation>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -13170,6 +13222,26 @@ Czy chcesz zapisać zmiany?</translation>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Długość</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Kąt</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Etykieta</translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -13941,6 +14013,26 @@ Czy chcesz zapisać zmiany?</translation>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Etykieta</translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

File diff suppressed because it is too large Load Diff

View File

@ -1177,6 +1177,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4451,6 +4459,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation>Limbă etichetă:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -5464,6 +5476,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -8387,6 +8415,10 @@ Do you want to save your changes?</source>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -9259,6 +9291,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QmuParser</name>
@ -12120,6 +12156,18 @@ Do you want to save your changes?</source>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -12585,6 +12633,10 @@ Do you want to save your changes?</source>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -12800,6 +12852,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Lungime</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Unghi</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -13559,6 +13631,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation>Заметки</translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished">Псевдоним 1:</translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished">Псевдоним 2:</translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4863,6 +4871,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation>Язык метки точки:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6048,6 +6060,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation>Заметки</translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished">Псевдоним 1:</translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished">Псевдоним 2:</translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9348,6 +9376,10 @@ Do you want to save your changes?</source>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation>Не удалось установить измерение C. Файл не открыт.</translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10466,6 +10498,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation>Не удалось подготовить заполнитель для финального измерения. Ошибка синтаксического анализатора в строке %1: %2.</translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13785,6 +13821,18 @@ Do you want to save your changes?</source>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation>Не удается сохранить файл &apos;%1&apos;. Ошибка: %2.</translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14269,6 +14317,10 @@ Do you want to save your changes?</source>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation>Значение для финальной мерки &quot;%1&quot; бесконечно или NaN. Пожалуйста, проверьте свои расчеты.</translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14519,6 +14571,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation>Ошибка при вычислении точки &apos;%1&apos;. Между кривой &apos;%2&apos; и осью через точку &apos;%3&apos; с углом %4° нет пересечений</translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Длина</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Угол</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Метка</translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15394,6 +15466,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation>Ошибка при вычислении точки &apos;%1&apos;. Кривые &apos;%2&apos; и &apos;%3&apos; не имеют точек пересечения</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished">Метка</translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -1212,6 +1212,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -4861,6 +4869,10 @@ Apply settings anyway?</source>
<source>Label language:</source>
<translation>Мова назви точки:</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPatternXmlEdit</name>
@ -6046,6 +6058,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -9346,6 +9374,10 @@ Do you want to save your changes?</source>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -10463,6 +10495,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QSaveFile</name>
@ -13780,6 +13816,18 @@ Do you want to save your changes?</source>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -14264,6 +14312,10 @@ Do you want to save your changes?</source>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -14510,6 +14562,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished">Довжина</translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished">Кут</translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -15385,6 +15457,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>

View File

@ -969,6 +969,14 @@
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogCutArc</name>
@ -3879,6 +3887,10 @@ Apply settings anyway?</source>
<source>yyyy-MM-dd</source>
<translation type="obsolete">--</translation>
</message>
<message>
<source>Passmark length:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPiecePath</name>
@ -4773,6 +4785,22 @@ Apply settings anyway?</source>
<source>Notes</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias1:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Alias2:</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>DialogPreferences</name>
@ -7504,6 +7532,10 @@ Do you want to save your changes?</source>
<source>Couldn&apos;t set dimension C. File wasn&apos;t opened.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Could not create recipe file. %1</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindowsNoGUI</name>
@ -8383,6 +8415,10 @@ This option will take an affect after restart.</source>
<source>Failed to prepare final measurement placeholder. Parser error at line %1: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Invalid global value for a passmark length. Piece &apos;%1&apos;. Length is less than minimal allowed.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>QmuParser</name>
@ -11184,6 +11220,18 @@ Do you want to save your changes?</source>
<source>Can&apos;t save file &apos;%1&apos;. Error: %2.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an flat dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an AAMA dxf file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Can&apos;t create an ASTM dxf file.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VLayoutPiece</name>
@ -11649,6 +11697,10 @@ Do you want to save your changes?</source>
<source>Value for final measurtement &apos;%1&apos; is infinite or NaN. Please, check your calculations.</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Unable to create record for final measurement &apos;%1&apos;. Error: %2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VPiece</name>
@ -11864,6 +11916,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. There is no intersection with curve &apos;%2&apos; and axis through point &apos;%3&apos; with angle %4°</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Length</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Angle</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolCutArc</name>
@ -12595,6 +12667,26 @@ Do you want to save your changes?</source>
<source>Error calculating point &apos;%1&apos;. Curves &apos;%2&apos; and &apos;%3&apos; have no point of intersection</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 1 segment 2</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<source>Curve 2 segment 2</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>VToolRotation</name>