diff --git a/share/translations/valentina.ts b/share/translations/valentina.ts index 0e99a0c79..afbae20fb 100644 --- a/share/translations/valentina.ts +++ b/share/translations/valentina.ts @@ -4827,40 +4827,40 @@ Principle of choosing the next workpiece - + Three groups: big, middle, small Three groups: big, middle, small - + Two groups: big, small Two groups: big, small - + Descending area Descending area - - + + Millimiters Millimiters - - + + Centimeters Centimeters - - + + Inches Inches - + Pixels Pixels @@ -4870,22 +4870,22 @@ Create a layout - + Auto crop unused length Auto crop unused length - + Unite pages (if possible) Unite pages (if possible) - + Gap width: Gap width: - + Save length of the sheet Save length of the sheet @@ -4967,7 +4967,7 @@ Custom - + Wrong fields. Wrong fields. @@ -4980,7 +4980,7 @@ Apply settings anyway? Apply settings anyway? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4991,7 +4991,7 @@ Apply settings anyway? Descending area = 2 - + Layout options Layout options @@ -5000,7 +5000,7 @@ Apply settings anyway? Shift/Offset length: - + Rule for choosing the next workpiece Rule for choosing the next workpiece @@ -5009,17 +5009,17 @@ Apply settings anyway? Enabling for sheets that have big height will speed up creating. - + Divide into strips Divide into strips - + Multiplier Multiplier - + Set multiplier for length of the biggest workpiece in layout. Set multiplier for length of the biggest workpiece in layout. @@ -5028,7 +5028,7 @@ Apply settings anyway? x - + Enabling for sheets that have big height will speed up creating. Enabling for sheets that have big height will speed up creating. @@ -5038,7 +5038,7 @@ Apply settings anyway? Printer: - + None Printer None @@ -5069,70 +5069,85 @@ Apply settings anyway? - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -8244,7 +8259,7 @@ Apply settings anyway? Save Layout - + File name: File name: @@ -8281,8 +8296,8 @@ Apply settings anyway? Select path to destination folder - - + + File base name File base name @@ -8316,37 +8331,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins - + Right: Right: - + Left: Left: - + Top: Top: - + Bottom: Bottom: - + Paper format Paper format @@ -8360,20 +8380,20 @@ Apply settings anyway? - - - - + + + + cm cm - + Templates: Templates: - + Orientation: @@ -8383,17 +8403,17 @@ Apply settings anyway? Options - + Scale - + Horizontal: - + Vertical: @@ -10919,27 +10939,27 @@ Apply settings anyway? Point - + Point along perpendicular Point along perpendicular - + Perpendicular point along line Perpendicular point along line - + Point along bisector Point along bisector - + Point at distance and angle Point at distance and angle - + Point at distance along line Point at distance along line @@ -10952,12 +10972,12 @@ Apply settings anyway? Line - + Line between points Line between points - + Point at line intersection Point at line intersection @@ -10974,7 +10994,7 @@ Apply settings anyway? Tools for creating arcs. - + Arc Arc @@ -11002,210 +11022,215 @@ Apply settings anyway? &Pattern piece - + Measurements Measurements - + Window Window - + Toolbar files Toolbar files - + ToolBar modes ToolBar modes - + Toolbar pattern Toolbar pattern - + Toolbar options Toolbar options - + Toolbar tools Toolbar tools - + Tool options Tool options - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New New - + &New &New - + Create a new pattern Create a new pattern - + Open Open - + &Open &Open - + Open file with pattern Open file with pattern - - + + Save Save - + &Save &Save - + Save pattern Save pattern - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Save &As... - + Save not yet saved pattern Save not yet saved pattern - + Draw Draw - + Details Details - + Pointer tools Pointer tools - + New pattern piece New pattern piece - + Add new pattern piece Add new pattern piece - + Change the label of pattern piece Change the label of pattern piece @@ -11218,57 +11243,57 @@ Apply settings anyway? Tables of variables - - + + History History - + About &Qt About &Qt - + &About Valentina &About Valentina - + E&xit E&xit - + Exit the application Exit the application - + Preferences Preferences - + Pattern properties Pattern properties - - + + Zoom in Zoom in - + zoom in zoom in - - - + + + Zoom out Zoom out @@ -11285,7 +11310,7 @@ Apply settings anyway? Original Zoom - + Zoom fit best Zoom fit best @@ -11302,7 +11327,7 @@ Apply settings anyway? Repot Bug... - + Report bug Report bug @@ -11319,8 +11344,8 @@ Apply settings anyway? Show online help - - + + Pattern piece %1 Pattern piece %1 @@ -11413,7 +11438,7 @@ Apply settings anyway? Select curve - + About Qt About Qt @@ -11453,7 +11478,7 @@ Apply settings anyway? - + Open file Open file @@ -11470,7 +11495,7 @@ Apply settings anyway? - + Error empty parameter. Error empty parameter. @@ -11486,17 +11511,17 @@ Apply settings anyway? Error parsing file (std::bad_alloc). - + Bad id. Bad id. - + File saved File saved - + untitled.val untitled.val @@ -11508,23 +11533,23 @@ Do you want to save your changes? - + &Undo &Undo - + &Redo &Redo - + Pattern piece: Pattern piece: - + Enter a new label for the pattern piece. Enter a new label for the pattern piece. @@ -11543,8 +11568,8 @@ Do you want to save your changes? - - + + File error. File error. @@ -11553,12 +11578,12 @@ Do you want to save your changes? File loaded - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? - + Reopen files. Reopen files. @@ -11571,12 +11596,12 @@ Do you want to save your changes? Individual measurements (*.vit) - + Special point on shoulder Special point on shoulder - + Triangle tool Triangle tool @@ -11585,42 +11610,42 @@ Do you want to save your changes? Point at intersection of arc and line - + Point from X and Y of two other points Point from X and Y of two other points - + Point intersect line and axis Point intersect line and axis - + Simple curve Simple curve - + Curved path Curved path - + Segmenting a simple curve Segmenting a simple curve - + Segment a curved path Segment a curved path - + Point intersect curve and axis Point intersect curve and axis - + Segment an arc Segment an arc @@ -11633,7 +11658,7 @@ Do you want to save your changes? Seam allowance tool - + Union tool Union tool @@ -11642,12 +11667,12 @@ Do you want to save your changes? toolBar - + Last Tool Last Tool - + Activate last used tool again Activate last used tool again @@ -11657,33 +11682,33 @@ Do you want to save your changes? Select point for X value (vertical) - + Mode Mode - + Pointer Pointer - + Config pattern piece Config pattern piece - + Layout Layout - + Show Curve Details Show Curve Details - + Show/hide control points and curve direction Show/hide control points and curve direction @@ -11692,27 +11717,27 @@ Do you want to save your changes? Tools - + Point of intersection arcs Point of intersection arcs - + Point of intersection circles Point of intersection circles - + Point from circle and tangent Point from circle and tangent - + Point from arc and tangent Point from arc and tangent - + Arc with given length Arc with given length @@ -11721,7 +11746,7 @@ Do you want to save your changes? Settings - + Layout pages Layout pages @@ -11742,27 +11767,27 @@ Do you want to save your changes? Split and save a layout into smaller pages - + Print Print - + Print tiled PDF Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) Split and print a layout into smaller pages (for regular printers) - + Print preview Print preview - + Print preview original layout Print preview original layout @@ -11771,8 +11796,8 @@ Do you want to save your changes? Export As... - - + + Export original layout Export original layout @@ -11814,7 +11839,7 @@ Do you want to save your changes? - + Layout mode Layout mode @@ -11823,7 +11848,7 @@ Do you want to save your changes? You can't use now the Layout mode. Please, create at least one workpiece. - + Unsaved changes Unsaved changes @@ -11862,12 +11887,12 @@ Do you want to save your changes? Standard measurements (*.vst);;Individual measurements (*.vit) - + You can't export empty scene. You can't export empty scene. - + Create new Layout Create new Layout @@ -11899,7 +11924,7 @@ Do you want to save your changes? Measurement file contains invalid known measurement(s). - + Measurement file has unknown format. Measurement file has unknown format. @@ -11926,13 +11951,13 @@ Do you want to save your changes? Couldn't sync measurements. - + Couldn't update measurements. Couldn't update measurements. - - + + The measurements file '%1' could not be found. The measurements file '%1' could not be found. @@ -11941,7 +11966,7 @@ Do you want to save your changes? The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location - + Loading measurements file Loading measurements file @@ -11958,9 +11983,9 @@ Do you want to save your changes? Couldn't set size. File wasn't opened. - - - + + + The method %1 does nothing in GUI mode The method %1 does nothing in GUI mode @@ -11977,45 +12002,45 @@ Do you want to save your changes? Couldn't set height. File wasn't opened. - - - - + + + + Export error. Export error. - + Please, provide one input file. Please, provide one input file. - + Print an original layout Print an original layout - + Preview tiled PDF Preview tiled PDF - + Print preview tiled layout Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -12038,7 +12063,7 @@ Do you want to save your changes? Couldn't unload measurements. Some of them are used in the pattern. - + True darts True darts @@ -12062,7 +12087,7 @@ Do you want to save your changes? Save... - + Don't Save Don't Save @@ -12095,7 +12120,7 @@ Do you want to save your changes? Report Bug... - + Point intersection curves Point intersection curves @@ -12113,7 +12138,7 @@ Do you want to save your changes? Measurements was changed. Do you want to sync measurements now? - + Curve tool which uses point as control handle Curve tool which uses point as control handle @@ -12148,14 +12173,14 @@ Do you want to save your changes? Select one or more objects, <b>Enter</b> - finish creation - + Rotate objects Rotate objects - - - + + + Close pattern Close pattern @@ -12168,12 +12193,12 @@ Do you want to save your changes? Tool pointer - + Midpoint between two points Midpoint between two points - + Group Group @@ -12194,8 +12219,8 @@ Do you want to save your changes? You can't use now the Layout mode. Please, include at least one detail in layout. - - + + Original zoom Original zoom @@ -12225,22 +12250,22 @@ Do you want to save your changes? Size: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line Flipping objects by line - + Flipping objects by axis Flipping objects by axis - + Move objects Move objects @@ -12259,7 +12284,7 @@ Do you want to save your changes? Measurements have been synced - + Elliptical Arc @@ -12279,89 +12304,89 @@ Do you want to save your changes? - + read only - + Variables Table - + Contains information about increments and internal variables - + Load Individual - + Load Individual measurements file - - + + Load Multisize - + Load multisize measurements file - + Open Tape - + Edit Current - + Edit linked to the pattern measurements - + Sync - + Synchronize linked to the pattern measurements after change - + Unload Current - + Unload measurements if they were not used in a pattern file - - + + Individual measurements Individual measurements - - + + Multisize measurements @@ -12372,7 +12397,7 @@ Do you want to save your changes? - + Pin tool @@ -12382,17 +12407,17 @@ Do you want to save your changes? - + Insert node tool - + Open Tape app for creating or editing measurements file - + Export increments to CSV @@ -12432,143 +12457,143 @@ Do you want to save your changes? - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool - + Duplicate detail tool @@ -12578,7 +12603,7 @@ Do you want to save your changes? - + The measurements file '%1' could not be found or provides not enough information. @@ -12598,17 +12623,17 @@ Do you want to save your changes? Changes applied. - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -12632,27 +12657,27 @@ Do you want to save your changes? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -12663,54 +12688,54 @@ Do you want to save your changes? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages @@ -12719,67 +12744,67 @@ Do you want to save your changes? ... - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove Remove - + Edit current - + Editor - + Create or edit a watermark @@ -12789,37 +12814,37 @@ Do you want to save your changes? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update Update - + Update manual layout @@ -12845,87 +12870,87 @@ Do you want to save your changes? Select folder - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -13010,38 +13035,38 @@ Do you want to save your changes? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled untitled - + All files All files - + Save Image - + Visibility group - + Show accuracy radius @@ -13085,7 +13110,7 @@ Do you want to save your changes? Cannot proceed because there are no available printers in your system. - + unnamed unnamed @@ -13098,7 +13123,7 @@ Do you want to save your changes? The layout was not updated since last pattern modification. Do you want to continue? - + Couldn't prepare data for creation layout Couldn't prepare data for creation layout @@ -13139,65 +13164,65 @@ Do you want to save your changes? Cannot set printer margins - - + + Can't create a path - + Preparing details for layout - + Pattern Pattern - + Name Name - + Value Value - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description Description - + Measurement file has unknown format. Measurement file has unknown format. @@ -13210,27 +13235,27 @@ Do you want to save your changes? Wrong units. - + File error. File error. - + Measurement file doesn't include all required measurements. Measurement file doesn't include all required measurements. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -13259,7 +13284,7 @@ Do you want to save your changes? MoveLabel - + move point label move point label @@ -14829,14 +14854,14 @@ This option will take an affect after restart. Wrong tag name '%1'. - + Can't convert toUInt parameter Can't convert toUInt parameter - + Can't convert toBool parameter Can't convert toBool parameter @@ -14847,7 +14872,7 @@ This option will take an affect after restart. Got empty parameter - + Can't convert toDouble parameter @@ -14900,22 +14925,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -14925,7 +14950,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -14969,13 +14994,13 @@ This option will take an affect after restart. Parser error: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -14985,7 +15010,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -15017,8 +15042,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -15040,7 +15065,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -15052,47 +15077,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -15120,39 +15145,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -15180,23 +15205,18 @@ This option will take an affect after restart. - + Cannot set printer margins Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -15244,25 +15264,25 @@ This option will take an affect after restart. Do you really want to delete? - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -15278,13 +15298,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -15855,7 +15875,7 @@ This option will take an affect after restart. - + 0 results @@ -15906,21 +15926,21 @@ This option will take an affect after restart. - + Name measurement column Name - + Full name measurement column Full name - + Group measurement column Group @@ -16146,7 +16166,7 @@ This option will take an affect after restart. - + Import from CSV @@ -16156,244 +16176,244 @@ This option will take an affect after restart. Export to CSV - + Show in Finder Show in Finder - + File '%1' doesn't exist! File '%1' doesn't exist! - + File error. File error. - + untitled %1 untitled %1 - - + + untitled untitled - + read only - - + + Known measurements - + All files All files - + Could not save the file - + known measurements - + Save as Save as - + Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. - + Could not save file Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt About Qt - + Empty - + File was not saved yet. File was not saved yet. - + Unsaved changes Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save Save - + Don't Save Don't Save - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list - + Unknown measurement - + &New Window &New Window - - + + Unnamed image %1 - + Open file Open file - + Length units - + Degrees - + None None - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Formula - + Description measurement column Description - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -16802,7 +16822,7 @@ Do you want to save your changes? - + Pattern unit: Pattern unit: @@ -16923,19 +16943,19 @@ Do you want to save your changes? Delete measurement - + unknown gender unknown - + male gender male - + female gender female @@ -17243,38 +17263,38 @@ Do you want to save your changes? - - + + Name measurement column Name - - + + Full name measurement column Full name - - + + Calculated value measurement column Calculated value - + Formula measurement column Formula - + Base value measurement column Base value @@ -17478,40 +17498,40 @@ Do you want to save your changes? None - + Invalid link - + Known measurements %1 - - + + Description measurement column Description - - - + + + Shift measurement column - + Empty list - - - + + + %1 shift @@ -17528,22 +17548,22 @@ Do you want to save your changes? - + Millimeters - + Inches Inches - + Centimeters Centimeters - + Degrees @@ -17569,7 +17589,7 @@ Do you want to save your changes? - + 0 results @@ -18836,12 +18856,12 @@ Do you want to save your changes? - + None None - + Known measurements %1 @@ -19194,27 +19214,22 @@ Do you want to save your changes? Can't cut this spline - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -20192,26 +20207,26 @@ Do you want to save your changes? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -20296,21 +20311,39 @@ Do you want to save your changes? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -20322,12 +20355,12 @@ Do you want to save your changes? VCommandLine - + Path to custom measure file (export mode). Path to custom measure file (export mode). - + The measure file The measure file @@ -20336,7 +20369,7 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - + Format number Format number @@ -20345,18 +20378,18 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - - + + Template number Template number - + The page width The page width - + The measure unit The measure unit @@ -20369,7 +20402,7 @@ Do you want to save your changes? Angle - + Auto crop unused length (export mode). Auto crop unused length (export mode). @@ -20386,7 +20419,7 @@ Do you want to save your changes? Layout units (as paper's one except px, export mode). - + The unit The unit @@ -20403,7 +20436,7 @@ Do you want to save your changes? Gap width x2, measured in layout units. (export mode). - + The gap width The gap width @@ -20412,7 +20445,7 @@ Do you want to save your changes? Sets layout groupping (export mode): - + Grouping type Grouping type @@ -20421,7 +20454,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - + Page height, width, units must be used all 3 at once. Page height, width, units must be used all 3 at once. @@ -20436,7 +20469,7 @@ Do you want to save your changes? - + Unsupported paper units. Unsupported paper units. @@ -20446,8 +20479,8 @@ Do you want to save your changes? Unsupported layout units. - - + + Export options can be used with single input file only. Export options can be used with single input file only. @@ -20456,17 +20489,17 @@ Do you want to save your changes? Run the program in a test mode. The program this mode load a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Test option can be used with single input file only. Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files The base filename of layout files @@ -20475,7 +20508,7 @@ Do you want to save your changes? The path to output destination folder. - + The destination folder The destination folder @@ -20496,12 +20529,12 @@ Do you want to save your changes? The height value - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -20532,22 +20565,22 @@ Do you want to save your changes? Ignore margins printing (export mode). Set all margins to 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. @@ -20556,32 +20589,32 @@ Do you want to save your changes? Shift length must be used together with shift units. - + Gap width must be used together with shift units. Gap width must be used together with shift units. - + Left margin must be used together with page units. Left margin must be used together with page units. - + Right margin must be used together with page units. Right margin must be used together with page units. - + Top margin must be used together with page units. Top margin must be used together with page units. - + Bottom margin must be used together with page units. Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. The path to output destination folder. By default the directory at which the application was started. @@ -20614,12 +20647,12 @@ Do you want to save your changes? Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. @@ -20628,17 +20661,17 @@ Do you want to save your changes? Shift layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. @@ -20655,7 +20688,7 @@ Do you want to save your changes? Shift/Offset length must be used together with shift units. - + Number corresponding to output format (default = 0, export mode): Number corresponding to output format (default = 0, export mode): @@ -20665,316 +20698,321 @@ Do you want to save your changes? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -20999,47 +21037,47 @@ Do you want to save your changes? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -21049,7 +21087,7 @@ Do you want to save your changes? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -21393,7 +21431,7 @@ Do you want to save your changes? VLayoutConverter - + Could not change version. Could not change version. @@ -21406,73 +21444,73 @@ Do you want to save your changes? - + Cannot set printer page size - + Cannot set printer margins Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 Creating file '%1' failed! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -21485,12 +21523,12 @@ Do you want to save your changes? VLayoutPiece - + Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21802,8 +21840,8 @@ Do you want to save your changes? - - + + Pieces of @@ -21906,12 +21944,12 @@ Do you want to save your changes? VPGraphicsPiece - + Move to - + Remove from Sheet @@ -21927,37 +21965,37 @@ Do you want to save your changes? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -22009,7 +22047,7 @@ Do you want to save your changes? - + Properties @@ -22174,9 +22212,9 @@ Do you want to save your changes? - - - + + + Export Export @@ -22230,84 +22268,84 @@ Do you want to save your changes? - + zoom - - + + Scale - + &Open &Open - + &Save &Save - + Save &As - + &Import Raw Layout Data - + E&xit E&xit - + &New &New - + About &Qt About &Qt - + About &Puzzle - + Zoom in Zoom in - + Zoom out Zoom out - + Zoom 1:1 - + Zoom fit best Zoom fit best - + Zoom sheet - - + + Preferences Preferences @@ -22328,7 +22366,7 @@ Do you want to save your changes? - + Could not extract data from file '%1'. %2 @@ -22351,102 +22389,102 @@ Do you want to save your changes? Inches - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Open file - + Could not save the file - + layout - + Save as Save as - + Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. - + Could not save file Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt About Qt @@ -22483,13 +22521,13 @@ Do you want to save your changes? - + Horizontal: - + Vertical: @@ -22572,71 +22610,76 @@ Do you want to save your changes? - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print Print - - + + Print preview Print preview - - + + Print tiled - - + + Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove Remove @@ -22647,13 +22690,13 @@ Do you want to save your changes? - + &Undo &Undo - + &Redo &Redo @@ -22664,113 +22707,113 @@ Do you want to save your changes? Pixels - + Unsaved changes Unsaved changes - + Save… - + Save Save - + Don't Save Don't Save - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Cannot proceed because there are no available printers in your system. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -22780,27 +22823,27 @@ Do you want to save your changes? - + Z value - + Bottom - + Down - + Up - + Top @@ -22810,12 +22853,12 @@ Do you want to save your changes? - + sheet - + Piece %1 invalid. %2 @@ -23003,37 +23046,37 @@ Do you want to save your changes? Error creating or updating detail - + Error creating or updating single point Error creating or updating single point - - + + Error creating or updating point of end line Error creating or updating point of end line - - + + Error creating or updating point along line Error creating or updating point along line - - + + Error creating or updating point of shoulder Error creating or updating point of shoulder - - + + Error creating or updating point of normal Error creating or updating point of normal - - + + Error creating or updating point of bisector Error creating or updating point of bisector @@ -23042,128 +23085,128 @@ Do you want to save your changes? Error creating or updating point of lineintersection - - + + Error creating or updating point of contact Error creating or updating point of contact - + Error creating or updating modeling point Error creating or updating modeling point - + Error creating or updating height Error creating or updating height - + Error creating or updating triangle Error creating or updating triangle - + Error creating or updating point of intersection Error creating or updating point of intersection - - + + Error creating or updating cut spline point Error creating or updating cut spline point - - + + Error creating or updating cut spline path point Error creating or updating cut spline path point - - + + Error creating or updating cut arc point Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis Error creating or updating point of intersection curve and axis - + Error creating or updating line Error creating or updating line - - + + Error creating or updating simple curve Error creating or updating simple curve - - + + Error creating or updating curve path Error creating or updating curve path - + Error creating or updating modeling simple curve Error creating or updating modeling simple curve - + Error creating or updating modeling curve path Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc Error creating or updating simple arc - + Error creating or updating modeling arc Error creating or updating modeling arc - + Error creating or updating union details Error creating or updating union details - + Error creating or updating point of intersection arcs Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent Error creating or updating point from arc and tangent - + Error creating or updating true darts Error creating or updating true darts @@ -23180,17 +23223,17 @@ Do you want to save your changes? Unknown point type '%1'. - + Unknown spline type '%1'. Unknown spline type '%1'. - + Unknown arc type '%1'. Unknown arc type '%1'. - + Unknown tools type '%1'. Unknown tools type '%1'. @@ -23200,75 +23243,75 @@ Do you want to save your changes? Error not unique id. - + Error creating or updating point of intersection curves Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline Error creating or updating simple interactive spline - + Error creating or updating interactive spline path Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation Error creating or updating operation of rotation - + Unknown operation type '%1'. Unknown operation type '%1'. - + Error creating or updating operation of flipping by line Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving Error creating or updating operation of moving - + Error creating or updating point of line intersection Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc @@ -23278,34 +23321,34 @@ Do you want to save your changes? Detail - + Unnamed path - - + + Error creating or updating a piece path - + Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -25087,108 +25130,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance - + move pattern piece label move pattern piece label - + resize pattern piece label resize pattern piece label - + rotate pattern piece label rotate pattern piece label - + move pattern info label move pattern info label - + resize pattern info label resize pattern info label - + rotate pattern info label rotate pattern info label - + move grainline move grainline - + resize grainline resize grainline - + rotate grainline rotate grainline - + Options Options - + In layout In layout - + Hide main path - + Reset piece label template - + Delete Delete - + apply save detail options - + multi deletion - + Forbid flipping Forbid flipping - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_cs_CZ.ts b/share/translations/valentina_cs_CZ.ts index b535263a9..af9fb7365 100644 --- a/share/translations/valentina_cs_CZ.ts +++ b/share/translations/valentina_cs_CZ.ts @@ -1296,22 +1296,22 @@ Move on top - Posunout úplně nahoru + Posunout úplně nahoru Move up - Posunout nahoru + Posunout nahoru Move down - Posunout dolů + Posunout dolů Move on bottom - Posunout úplně dolů + Posunout úplně dolů @@ -4767,40 +4767,40 @@ Zásada pro výběr dalšího obrobku - + Three groups: big, middle, small Tři skupiny: velká, prostřední, malá - + Two groups: big, small Dvě skupiny, malá, velká - + Descending area Oblast klesání - - + + Millimiters Milimetry - - + + Centimeters Centimetry - - + + Inches Palce - + Pixels Pixely @@ -4810,22 +4810,22 @@ Vytvořit rozvržení - + Auto crop unused length Automaticky ořezat nepoužívanou délku - + Unite pages (if possible) Spojit strany (pokud je to možné) - + Gap width: Šířka mezery: - + Save length of the sheet Uložit délku listu @@ -4907,7 +4907,7 @@ Vlastní - + Wrong fields. Nesprávná pole. @@ -4920,7 +4920,7 @@ Apply settings anyway? Přesto použít nastavení? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4931,7 +4931,7 @@ Přesto použít nastavení? Oblast klesání = 2 - + Layout options Volby rozvržení @@ -4940,7 +4940,7 @@ Přesto použít nastavení? Délka posunutí/vyrovnání: - + Rule for choosing the next workpiece Pravidlo pro výběr dalšího střihového dílu @@ -4949,17 +4949,17 @@ Přesto použít nastavení? Povolení pro listy mající velkou výšku urychlí vytvoření. - + Divide into strips Rozdělit do proužků - + Multiplier Násobitel - + Set multiplier for length of the biggest workpiece in layout. Stanovit násobitele pro délku největšího střihového dílu v rozvržení. @@ -4968,7 +4968,7 @@ Přesto použít nastavení? x - + Enabling for sheets that have big height will speed up creating. Povolení pro listy mající velkou výšku urychlí vytvoření. @@ -4978,7 +4978,7 @@ Přesto použít nastavení? Tiskárna: - + None Printer Žádný @@ -5009,7 +5009,7 @@ Přesto použít nastavení? Přehlížet okraje - + Margins go beyond printing. Apply settings anyway? @@ -5018,63 +5018,78 @@ Apply settings anyway? Přesto použít nastavení? - + Follow grainline Následovat dráhu nitě - + Time: Čas: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. Čas daný algoritmu k nalezení nejlepšího rozvržení. - + Efficiency: Účinnost: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority Ruční přednost - + Nest quantity of copies according to piece settings. Množství naskládání kopií do sebe podle nastavení střihu. - + Nest quantity Množství naskládání do sebe - + Auto crop unused width Automaticky ořezat nepoužívanou šířku - + Prefer one sheet solution Upřednostnit jednolistové řešení - + min minutes min - + Enable this option to prefer getting one sheet solutions. Povolit tuto volbu, aby se upřednostňovalo získání jednolistového řešení. @@ -8148,7 +8163,7 @@ Přesto použít nastavení? Uložit rozvržení - + File name: Název souboru: @@ -8185,8 +8200,8 @@ Přesto použít nastavení? Vybrat cestu k cílové složce - - + + File base name Název souboru databáze @@ -8220,37 +8235,42 @@ Přesto použít nastavení? + Boundary together with notches + + + + Not available options - + Margins Okraje - + Right: Pravý: - + Left: Levý: - + Top: Nahoře: - + Bottom: Dole: - + Paper format Formát papíru @@ -8260,20 +8280,20 @@ Přesto použít nastavení? Procházet… - - - - + + + + cm cm - + Templates: Předlohy: - + Orientation: Natočení: @@ -8283,17 +8303,17 @@ Přesto použít nastavení? Volby - + Scale Měřítko - + Horizontal: Vodorovná: - + Vertical: Svislá: @@ -9808,22 +9828,22 @@ Přesto použít nastavení? Move on top - Posunout úplně nahoru + Posunout úplně nahoru Move up - Posunout nahoru + Posunout nahoru Move down - Posunout dolů + Posunout dolů Move on bottom - Posunout úplně dolů + Posunout úplně dolů @@ -10650,27 +10670,27 @@ Přesto použít nastavení? Bod - + Point along perpendicular Bod podél pravého úhlu - + Perpendicular point along line Bod v pravém úhlu podél čáry - + Point along bisector Bod podél osy úhlu - + Point at distance and angle Bod ve vzdálenosti a úhlu - + Point at distance along line Bod ve vzdálenosti podél čáry @@ -10683,12 +10703,12 @@ Přesto použít nastavení? Čára - + Line between points Čára mezi body - + Point at line intersection Bod na průsečíku čar @@ -10705,7 +10725,7 @@ Přesto použít nastavení? Nástroje na vytváření oblouků. - + Arc Oblouk @@ -10733,210 +10753,215 @@ Přesto použít nastavení? &Střih - + Measurements Míry - + Window Okno - + Toolbar files Nástrojový pruh Soubory - + ToolBar modes Nástrojový pruh Režimy - + Toolbar pattern Nástrojový pruh Střihy - + Toolbar options Nástrojový pruh Volby - + Toolbar tools Nástrojový pruh Nástroje - + Tool options Volby pro nástroje - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Nový - + &New &Nový - + Create a new pattern Vytvořit nový střih - + Open Otevřít - + &Open &Otevřít - + Open file with pattern Otevřít soubor se střihem - - + + Save Uložit - + &Save &Uložit - + Save pattern Uložit střih - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Uložit j&ako... - + Save not yet saved pattern Uložit dosud neuložený střih - + Draw Kreslení - + Details Jednotlivosti - + Pointer tools Nástroje ukazovátka - + New pattern piece Nový díl střihu - + Add new pattern piece Přidat nový díl střihu - + Change the label of pattern piece Změnit štítek dílu střihu @@ -10949,57 +10974,57 @@ Přesto použít nastavení? Tabulky proměnných - - + + History Historie - + About &Qt O &Qt - + &About Valentina &O programu Valentina - + E&xit &Ukončit - + Exit the application Ukončit program - + Preferences Nastavení - + Pattern properties Vlastnosti střihu - - + + Zoom in Přiblížit - + zoom in přiblížit - - - + + + Zoom out Oddálit @@ -11016,7 +11041,7 @@ Přesto použít nastavení? Původní přiblížení - + Zoom fit best Přizpůsobit velikost oknu aplikace @@ -11033,7 +11058,7 @@ Přesto použít nastavení? Nahlásit chybu… - + Report bug Nahlásit chybu @@ -11050,8 +11075,8 @@ Přesto použít nastavení? Zobrazit nápovědu na internetu - - + + Pattern piece %1 Díl střihu %1 @@ -11144,7 +11169,7 @@ Přesto použít nastavení? Vybrat křivku - + About Qt O Qt @@ -11184,7 +11209,7 @@ Přesto použít nastavení? - + Open file Otevřít soubor @@ -11201,7 +11226,7 @@ Přesto použít nastavení? - + Error empty parameter. Chyba. Prázdný parametr. @@ -11217,17 +11242,17 @@ Přesto použít nastavení? Chyba při zpracování souboru (std::bad_alloc). - + Bad id. Chybný identifikátor. - + File saved Soubor uložen - + untitled.val Bez názvu.val @@ -11239,23 +11264,23 @@ Chcete uložit své změny? - + &Undo &Zpět - + &Redo &Znovu - + Pattern piece: Díl střihu: - + Enter a new label for the pattern piece. Zadejte nový štítek dílu střihu. @@ -11274,8 +11299,8 @@ Chcete uložit své změny? - - + + File error. Chyba souboru. @@ -11284,12 +11309,12 @@ Chcete uložit své změny? Soubor nahrán - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina nebyla vypnuta správně. Chcete znovu otevřít soubory (%1), které jste měli otevřeny? - + Reopen files. Znovu otevřít soubory. @@ -11302,12 +11327,12 @@ Chcete uložit své změny? Individuální míry (*.vit) - + Special point on shoulder Zvláštní bod na rameni - + Triangle tool Nástroj trojúhelníku @@ -11316,42 +11341,42 @@ Chcete uložit své změny? Bod v průsečíku oblouku a čáry - + Point from X and Y of two other points Bod se stejným X jednoho bodu a stejným Y jiného - + Point intersect line and axis Bod průsečíku čáry a osy - + Simple curve Jednoduchá křivka - + Curved path Cesta křivky - + Segmenting a simple curve Rozdělení jednoduché křivky - + Segment a curved path Rozdělit zakřivenou cestu - + Point intersect curve and axis Bod průsečíku křivky a osy - + Segment an arc Část oblouku @@ -11364,7 +11389,7 @@ Chcete uložit své změny? Nástroj pro stanovení švové záložky - + Union tool Nástroj Spojení @@ -11373,12 +11398,12 @@ Chcete uložit své změny? Lišta nástrojů - + Last Tool Naposledy použitý nástroj - + Activate last used tool again Vybrat znovu naposledy použitý nástroj @@ -11388,33 +11413,33 @@ Chcete uložit své změny? Vybrat bod pro hodnotu X (svislý) - + Mode Režim - + Pointer Ukazovátko - + Config pattern piece Nastavit díl střihu - + Layout Rozvržení - + Show Curve Details Ukázat podrobnosti křivky - + Show/hide control points and curve direction Ukázat/Skrýt ovládací body a směr křivky @@ -11423,27 +11448,27 @@ Chcete uložit své změny? Nástroje - + Point of intersection arcs Průsečík oblouků - + Point of intersection circles Průsečík kruhů - + Point from circle and tangent Průsečík kruhu a tangenty - + Point from arc and tangent Průsečík oblouku a tangenty - + Arc with given length Oblouk s danou délkou @@ -11452,7 +11477,7 @@ Chcete uložit své změny? Nastavení - + Layout pages Zobrazit stránky v rozvržení @@ -11473,27 +11498,27 @@ Chcete uložit své změny? Rozdělit a uložit rozvržení do menších stran - + Print Tisk - + Print tiled PDF Tisk dlaždicového PDF - + Split and print a layout into smaller pages (for regular printers) Rozdělit a uložit rozvržení do menších stran (pro běžné tiskárny) - + Print preview Náhled před tiskem - + Print preview original layout Tiskový náhled s původním rozvržením @@ -11502,8 +11527,8 @@ Chcete uložit své změny? Vyvést jako... - - + + Export original layout Vyvést původní rozvržení @@ -11545,7 +11570,7 @@ Chcete uložit své změny? - + Layout mode Režim rozvržení @@ -11554,7 +11579,7 @@ Chcete uložit své změny? Nyní nemůžete použít Režim rozvržení. Vytvořte, prosím, alespoň jeden střihový díl. - + Unsaved changes Neuložené změny @@ -11593,12 +11618,12 @@ Chcete uložit své změny? Obvyklé míry (*.vst);;Individuální míry (*.vit) - + You can't export empty scene. Nelze vyvést prázdný soubor (prázdné rozvržení). - + Create new Layout Vytvořit nové rozvržení @@ -11630,7 +11655,7 @@ Chcete uložit své změny? Soubor s mírami obsahuje neplatný(é) rozměr(y). - + Measurement file has unknown format. Soubor s mírami má neznámý formát. @@ -11657,13 +11682,13 @@ Chcete uložit své změny? Nepodařilo se seřídit míry. - + Couldn't update measurements. Nepodařilo se aktualizovat míry. - - + + The measurements file '%1' could not be found. Nepodařilo se najít soubor s mírami '%1'. @@ -11672,7 +11697,7 @@ Chcete uložit své změny? Nepodařilo se najít soubor s mírami <br/><br/> <b>%1</b> <br/><br/>. Chcete aktualizovat umístění souboru? - + Loading measurements file Nahrává se soubor s mírami @@ -11689,9 +11714,9 @@ Chcete uložit své změny? Nepodařilo se stanovit velikost. Soubor nebyl otevřen. - - - + + + The method %1 does nothing in GUI mode Metoda %1 nepůsobí v režimu rozhraní @@ -11708,45 +11733,45 @@ Chcete uložit své změny? Nepodařilo se stanovit výšku. Soubor nebyl otevřen. - - - - + + + + Export error. Chyba při vyvádění. - + Please, provide one input file. Poskytněte, prosím, jeden vstupní soubor. - + Print an original layout Vytisknout původní rozvržení - + Preview tiled PDF Náhled dlaždicového PDF - + Print preview tiled layout Zobrazit náhled na dlaždicové rozvržení - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Režim pro práci s jednotlivostmi (díly střihu). Tyto díly střihu jsou základem pro další krok v &quot;režimu jednotlivosti&quot;. Předtím než můžete dále pracovat v &quot;režimu jednotlivosti&quot;, musíte vytvořit alespoň jednu jednotlivost (díl střihu).</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Režim pro práci s jednotlivostmi (díly střihu). Předtím než můžete dále pracovat v &quot;režimu jednotlivosti&quot;, musíte alespoň jednu jednotlivost (díl střihu) vytvořit v &quot;režimu kreslení&quot;. Jednotlivosti (díly střihu) vytvořené v tomto kroku se použijí na vytvoření rozvržení.</p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Režim k vytváření rozvržení jednotlivostí (dílů střihu). Tento režim je dostupný, když byla vytvořena alespoň jedna jednotlivost (díl střihu) v &quot;režimu jednotlivosti&quot;. Rozvržení lze vyvést do upřednostňovaného souborového formátu a uložit na pevný disk.</p></body></html> @@ -11769,7 +11794,7 @@ Chcete uložit své změny? Nepodařilo se smazat míry. Některé z nich se používají v nynějším střihu. - + True darts Vyrovnat délku záševku @@ -11793,7 +11818,7 @@ Chcete uložit své změny? Uložit... - + Don't Save Neukládat @@ -11826,7 +11851,7 @@ Chcete uložit své změny? Nahlásit chybu… - + Point intersection curves Průsečík dvou křivek @@ -11844,7 +11869,7 @@ Chcete uložit své změny? Míry byly změněny. Chcete nyní míry seřídit? - + Curve tool which uses point as control handle Nástroj křivky, který jako ovládací úchop používá bod @@ -11879,14 +11904,14 @@ Chcete uložit své změny? Vyberte jeden nebo více předmětů, <b>Enter</b> - dokončit výběr - + Rotate objects Otočit předměty - - - + + + Close pattern Zavřít střih @@ -11899,12 +11924,12 @@ Chcete uložit své změny? Nástroj Ukazovátko - + Midpoint between two points Středový bod mezi dvěma body - + Group Skupina @@ -11925,8 +11950,8 @@ Chcete uložit své změny? Nyní nemůžete použít Režim rozvržení. Zahrňte, prosím, do rozvržení alespoň jednu jednotlivost (díl střihu). - - + + Original zoom Původní přiblížení @@ -11956,22 +11981,22 @@ Chcete uložit své změny? Velikost: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? Nepodařilo se najít soubor s mírami <br/><br/> <b>%1</b> <br/><br/>. Chcete aktualizovat umístění souboru? - + Flipping objects by line Převrátit předměty podle čáry - + Flipping objects by axis Převrátit předměty podle osy - + Move objects Posunout předměty @@ -11990,7 +12015,7 @@ Chcete uložit své změny? Míry byly seřízeny - + Elliptical Arc Elipsovitý oblouk @@ -12010,89 +12035,89 @@ Chcete uložit své změny? Nepodařilo se uložit soubor - + read only Pouze pro čtení - + Variables Table Tabulka proměnných - + Contains information about increments and internal variables Obsahuje údaje o přírůstcích a vnitřních proměnných - + Load Individual Nahrát individuální měření - + Load Individual measurements file Nahrát soubor s individuálními mírami - - + + Load Multisize Nahrát více velikostí - + Load multisize measurements file Nahrát soubor s vícevelikostními mírami - + Open Tape Otevřít Tape - + Edit Current Upravit nynější - + Edit linked to the pattern measurements Upravit míry spojené se střihem - + Sync Seřídit - + Synchronize linked to the pattern measurements after change Seřídit míry spojené se střihem po změně - + Unload Current Smazat nynější - + Unload measurements if they were not used in a pattern file Smazat nahrané míry, které nebyly použity v nynějším souboru se střihem - - + + Individual measurements Individuální míry - - + + Multisize measurements Měření více velikostí @@ -12103,7 +12128,7 @@ Chcete uložit své změny? Soubory se střihem - + Pin tool Nástroj Špendlík @@ -12113,17 +12138,17 @@ Chcete uložit své změny? Vybrat bod špendlíku - + Insert node tool Nástroj Vložit uzel - + Open Tape app for creating or editing measurements file Otevřít program Tape pro vytvoření nebo upravení souboru s mírami - + Export increments to CSV Vyvést přírůstky do CSV @@ -12163,143 +12188,143 @@ Chcete uložit své změny? Ještě nemůžete použít Režim rozvržení. - + Zoom fit best current Přizpůsobit nynější pohled - + zoom fit best current pattern piece Přizpůsobit pohled nejlépe na nynější díl střihu - + Export details skiping the Layout stage Vyvést jednotlivosti (díly střihu) a přeskočit krok rozvržení - + You don't have enough details to export. Please, include at least one detail in layout. Nemáte dost jednotlivostí (dílů střihu) k vyvedení. Zahrňte, prosím, alespoň jednu jednotlivost (díl střihu) do rozvržení. - + Export details Vyvést jednotlivosti (díly střihu) - + Can't export details. Nelze vyvést jednotlivosti (díly střihu). - + Label template editor Editor předlohy popisu - + Workpiece tool Nástroj Střihový díl - + Internal path tool Nástroj Vnitřní cesta - + Save &As… Uložit j&ako… - + Report Bug… Nahlásit chybu… - + Export As… Vyvést jako… - + Save… Uložit… - + Final measurements Konečné míry - + Export Final Measurements to CSV Vyvést konečné míry do CSV - + You can't export empty scene. Please, include at least one detail in layout. Nemůžete vyvést prázdný výstup. Zahrňte, prosím, do rozvržení alespoň jednu jednotlivost (díl střihu). - + Export final measurements error. Chyba při vyvádění konečných měr do CSV. - + Destination path is empty. Cílová cesta je prázdná. - + Next pattern piece Další díl střihu - + Ctrl+PgDown Ctrl+PgDown - + Previous pattern piece Předchozí díl střihu - + Ctrl+PgUp Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool Nástroj Umístit popis - + Duplicate detail tool Nástroj Zdvojit jednotlivost (díl střihu) @@ -12309,7 +12334,7 @@ Chcete uložit své změny? Vybrat středový bod umístění popisu - + The measurements file '%1' could not be found or provides not enough information. Soubor s mírami '%1' se nepodařilo najít nebo neposkytuje dostatek údajů. @@ -12329,17 +12354,17 @@ Chcete uložit své změny? Změny použity. - + Cannot save settings. Access denied. Nelze uložit nastavení. Přístup odepřen. - + Ctrl+O Ctrl+O - + Cannot read settings from a malformed .INI file. Nelze číst nastavení z poškozeného souboru .INI. @@ -12363,27 +12388,27 @@ Chcete uložit své změny? Vyberte jeden nebo více předmětů, podržet <b>%1</b> - pro vícenásobný výběr, <b>%2</b> - potvrdit výběr - + Point of intersection circle and segment Průsečík kruhu a části - + Increase label font Zvětšit písmo popisu - + Decrease label font Zmenšit písmo popisu - + Original label font Původní písmo popisu - + Hide labels Skrýt popisy @@ -12394,119 +12419,119 @@ Chcete uložit své změny? Skupiny viditelnosti - - + + Export recipe Vyvést Recipe - + Recipe files Soubory Recipe - + recipe Recipe - + Could not save recipe. %1 Nepodařilo se uložit Recipe. %1 - + Curved path tool which uses point as control handle Nástroj zakřivené cesty, který jako ovládací úchop používá bod - + Point of intersection arc and axis Bod průsečíku oblouku a osy - + Show main path Ukázat hlavní cestu - + Globally show pieces main path Ukázat celkově hlavní cestu dílu - - + + Pattern messages Zprávy střihu - + Clear all messages Smazat všechny zprávy - + Filter Filtr - + DEBUG LADĚNÍ - + WARNING VAROVÁNÍ - + CRITICAL ZÁSADNÍ - + FATAL VELMI ZÁVAŽNÉ - + INFO INFORMACE - + Auto refresh the list with each parse Automaticky při každém zpracování obnovit seznam - + Watermark Vodoznak - + Load Nahrát - + Remove Odstranit - + Edit current Upravit nynější - + Editor Editor - + Create or edit a watermark Vytvořit nebo upravit vodoznak @@ -12516,37 +12541,37 @@ Chcete uložit své změny? Soubory vodoznaku - + Manual Layout Ruční rozvržení - + Open Puzzle Otevřít Puzzle - + Open the Puzzle app Otevřít program Puzzle - + Create Vytvořit - + Create manual layout Vytvořit ruční rozvržení - + Update Aktualizovat - + Update manual layout Aktualizovat ruční rozvržení @@ -12572,87 +12597,87 @@ Chcete uložit své změny? Vybrat složku - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. Hodnota A výšky '%1' pro tento soubor se střihem není podporována. - + Couldn't set dimension A. Need a file with multisize measurements. Nepodařilo se stanovit rozměr A. Soubor musí mít vícevelikostní míry. - + Couldn't set dimension A. File wasn't opened. Nepodařilo se stanovit rozměr A. Soubor nebyl otevřen. - + Not supported dimension B value '%1' for this pattern file. Hodnota B výšky '%1' pro tento soubor se střihem není podporována. - + Couldn't set dimension B. Need a file with multisize measurements. Nepodařilo se stanovit rozměr B. Soubor musí mít vícevelikostní míry. - + Couldn't set dimension B. File wasn't opened. Nepodařilo se stanovit rozměr B. Soubor nebyl otevřen. - + Not supported dimension C value '%1' for this pattern file. Hodnota C výšky '%1' pro tento soubor se střihem není podporována. - + Couldn't set dimension C. Need a file with multisize measurements. Nepodařilo se stanovit rozměr C. Soubor musí mít vícevelikostní míry. - + Couldn't set dimension C. File wasn't opened. Nepodařilo se stanovit rozměr C. Soubor nebyl otevřen. - + Could not create recipe file. %1 Nepodařilo se vytvořit soubor Recipe. %1 - + Shop Obchod - + Scalable Vector Graphics files Škálovatelné soubory vektorové grafiky - + Save draw Uložit kreslení - + Draw export Vyvedení kreslení - + Background images Obrázky pozadí - + Add background image Přidat obrázek pozadí @@ -12737,38 +12762,38 @@ Chcete uložit své změny? Vybrat obrázek pozadí - - + + Unable to save image. Error: %1 Nepodařilo se uložit obrázek. Chyba: %1 - + Unable to save image. No data. Nelze uložit obrázek. Žádná data. - + untitled bez názvu - + All files Všechny soubory - + Save Image Uložit obrázek - + Visibility group Skupina viditelnosti - + Show accuracy radius Ukázat poloměr přesnosti @@ -12812,7 +12837,7 @@ Chcete uložit své změny? Nelze pokračovat, protože ve vašem systému nejsou dostupné žádné tiskárny. - + unnamed bez názvu @@ -12825,7 +12850,7 @@ Chcete uložit své změny? Rozvržení nebylo od poslední změny střihu aktualizováno. Chcete pokračovat? - + Couldn't prepare data for creation layout Nepodařilo se připravit data pro vytvoření rozvržení @@ -12866,90 +12891,90 @@ Chcete uložit své změny? Nelze nastavit okraje tiskárny - - + + Can't create a path Nelze vytvořit cestu - + Preparing details for layout Připravují se podrobnosti pro rozvržení - + Pattern Střih - + Name Název - + Value Hodnota - - - + + + Export final measurements error. Chyba při vyvádění konečných měr. - + Value in line %1 is infinite or NaN. Please, check your calculations. Hodnota na řádku %1 je nekonečno nebo NaN. Prověřte, prosím, svoje výpočty. - + Parser error at line %1: %2. Chyba při zpracování na řádku %1: %2. - + File error %1. Chyba souboru %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Jeden nebo více dílů střihu je větší než formát papíru, jejž jste vybral. Vyberte, prosím, větší formát papíru. - + Description Popis - + Measurement file has unknown format. Soubor s mírami má neznámý formát. - + File error. Chyba souboru. - + Measurement file doesn't include all required measurements. Soubor s mírami neobsahuje všechny požadované míry. - + Please, additionally provide: %1 Dodatečně, prosím, poskytněte: %1 - + Timeout. Vypršení času. - + Process has been stoped because of exception. Postup byl kvůli výjimce zastaven. @@ -12978,7 +13003,7 @@ Chcete uložit své změny? MoveLabel - + move point label Posunout popis bodu @@ -14478,14 +14503,14 @@ Tato volba se projeví po opětovném spuštění. Změny použity. - + Can't convert toUInt parameter Nelze převést parametr toUInt - + Can't convert toBool parameter Nelze převést parametr toBool @@ -14496,7 +14521,7 @@ Tato volba se projeví po opětovném spuštění. Obdržen prázdný parametr - + Can't convert toDouble parameter @@ -14525,22 +14550,22 @@ Tato volba se projeví po opětovném spuštění. Uživatelský materiál %1 v tomto střihu nebyl stanoven. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Nelze spočítat zářez pro bod '%1' v dílu '%2'. Švová záložka je prázdná. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. Nelze spočítat zářez pro bod '%1' v dílu '%2'. Nelze najít polohu pro zářez. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. Nelze spočítat zářez pro bod '%1' v dílu '%2'. Nelze opravit polohu zářezu. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. Nelze spočítat zářez pro bod '%1' v dílu '%2'. @@ -14550,7 +14575,7 @@ Tato volba se projeví po opětovném spuštění. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. Nelze spočítat zářez pro bod '%1' v dílu '%2'. Nelze najít průsečík. @@ -14594,13 +14619,13 @@ Tato volba se projeví po opětovném spuštění. Chyba zpracování: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. Díl '%1' má neplatný přídavek na rozvržení. Prověřte, prosím, švovou záložku, a tak ověřte, jak se švová záložka chová. - - + + Piece '%1'. Seam allowance is not valid. Díl '%1'. Švová záložka není platná. @@ -14610,7 +14635,7 @@ Tato volba se projeví po opětovném spuštění. Nalezen nulový zářez pro bod '%1' v dílu '%2'. Délka je menší než nejmenší povolená délka. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. Nelze spočítat zářez pro bod '%1' v dílu '%2' se zabudovanou švovou záložkou. Uživatel musí zadat délku ručně. @@ -14642,8 +14667,8 @@ Tato volba se projeví po opětovném spuštění. Nelze vypočítat délku značky sestavení pro bod '%1'. Důvod: %2. - - + + Passmark '%1' is not part of piece '%2'. Značka sestavení '%1' není součástí dílu '%2'. @@ -14665,7 +14690,7 @@ Tato volba se projeví po opětovném spuštění. Neplatný vzorec '%1' pro nástroj s ID '%2'. %3. - + Can't convert toInt parameter @@ -14677,47 +14702,47 @@ Tato volba se projeví po opětovném spuštění. Název dílu '%1' není jedinečný. - + Could not find the segment start. Nepodařilo se najít začátek části. - + Could not find the segment end. Nepodařilo se najít konec části. - + Segment is too short. Část je příliš krátká. - + Error calculating segment for curve '%1'. %2 Chyba při výpočtu části pro křivku '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 Chyba v cestě '%1'. Výpočet části pro křivku '%2' se nezdařil. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. Nelze připravit značku sestavení '%1' pro díl '%2'. Značka sestavení je prázdná. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. Nelze připravit vestavěnou značku sestavení '%1' pro díl '%2'. Základní čára značky sestavení je prázdná. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. Nelze připravit značku sestavení '%1' pro díl '%2'. Základní čára značky sestavení je prázdná. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. Nelze připravit značku sestavení '%1' pro díl '%2'. Značka sestavení je prázdná. @@ -14745,39 +14770,39 @@ Tato volba se projeví po opětovném spuštění. - + No data for the height dimension. Žádná data pro rozměr výšky. - + No data for the size dimension. Žádná data pro rozměr velikosti. - + No data for the hip dimension. Žádná data pro rozměr kyčle. - + No data for the waist dimension. Žádná data pro rozměr pasu. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. Díl '%1'. Dráha nitě není platná. @@ -14805,23 +14830,22 @@ Tato volba se projeví po opětovném spuštění. - + Cannot set printer margins Nelze nastavit okraje tiskárny - Unable to cut curve '%1'. The curve is too short. - Nelze oříznout křivku '%1'. Křivka je příliš krátká. + Nelze oříznout křivku '%1'. Křivka je příliš krátká. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Křivka '%1'. Délka vyjmuté části je příliš malá. Vylaďte ji na nejmenší hodnotu. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Křivka '%1'. Délka vyjmuté části je příliš velká. Vylaďte ji na největší hodnotu. @@ -14869,25 +14893,25 @@ Tato volba se projeví po opětovném spuštění. Opravdu chcete smazat? - + No data for the X dimension. Žádná data pro rozměr X. - + No data for the Y dimension. Žádná data pro rozměr Y. - + No data for the Z dimension. Žádná data pro rozměr Z. - + No data for the W dimension. Žádná data pro rozměr W. @@ -14903,13 +14927,13 @@ Tato volba se projeví po opětovném spuštění. z hodnota posunuje díly - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Křivka '%1'. Délka vyjmuté části (%2) je příliš malá. Vylaďte ji na nejmenší hodnotu. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Křivka '%1'. Délka vyjmuté části (%2) je příliš velká. Vylaďte ji na největší hodnotu. @@ -15465,7 +15489,7 @@ Tato volba se projeví po opětovném spuštění. - + 0 results 0 výsledků @@ -15516,21 +15540,21 @@ Tato volba se projeví po opětovném spuštění. - + Name measurement column Název - + Full name measurement column Plný název - + Group measurement column Skupina @@ -15752,7 +15776,7 @@ Tato volba se projeví po opětovném spuštění. - + Import from CSV Zavést z CSV @@ -15762,244 +15786,244 @@ Tato volba se projeví po opětovném spuštění. Vyvést do CSV - + Show in Finder Ukázat ve okně pro hledání - + File '%1' doesn't exist! Soubor '%1' není! - + File error. Chyba souboru. - + untitled %1 bez názvu %1 - - + + untitled bez názvu - + read only Pouze pro čtení - - + + Known measurements - + All files Všechny soubory - + Could not save the file Nepodařilo se uložit soubor - + known measurements - + Save as Uložit jako - + Failed to lock. This file already opened in another window. Nepodařilo se uzamknout. Tento soubor je již otevřen v jiném okně. - + Could not save file Nepodařilo se uložit soubor - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Nepodařilo se uzamknout. Tento soubor je již otevřen v jiném okně. Při zdvojeném vykonávání (2 kopie programu) může dojít ke střetům. - + Comma-Separated Values Čárkou oddělené hodnoty - + Measurement image - + Invalid image. Error: %1 Neplatný obrázek. Chyba: %1 - - + + Unable to save image. Error: %1 Nepodařilo se uložit obrázek. Chyba: %1 - + Save Image Uložit obrázek - + Unable to show image. Error: %1 Nepodařilo se zobrazit obrázek. Chyba: %1 - + About Qt O Qt - + Empty Prázdný - + File was not saved yet. Soubor ještě nebyl uložen. - + Unsaved changes Neuložené změny - + Measurements have been modified. Do you want to save your changes? - + Save… Uložit… - + Save Uložit - + Don't Save Neukládat - + Cannot read settings from a malformed .INI file. Nelze číst nastavení z poškozeného souboru .INI. - + Cannot save settings. Access denied. Nelze uložit nastavení. Přístup odepřen. - + Empty list Prázdný - + Unknown measurement - + &New Window &Nové okno - - + + Unnamed image %1 - + Open file Otevřít soubor - + Length units - + Degrees Stupně - + None Žádný - + Measurement name is empty. Název míry je prázdný. - + Imported file must not contain the same name twice. Zavedený soubor nesmí obsahovat stejný název dvakrát. - + Measurement '%1' doesn't match regex pattern. Rozměry '%1' neodpovídají vzoru regulárního výrazu. - + Measurement '%1' already used in the file. Míra '%1' již použita v souboru. - + Formula measurement column Vzorec - + Description measurement column Popis - + Error in row %1. The measurement name is empty. Chyba na řádku %1. Název míry je prázdný. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. Individuální míry vyžadují alespoň 2 sloupce. @@ -16408,7 +16432,7 @@ Chcete uložit změny? - + Pattern unit: Jednotka střihu: @@ -16529,19 +16553,19 @@ Chcete uložit změny? Smazat míru - + unknown gender Neznámý - + male gender muž - + female gender žena @@ -16849,38 +16873,38 @@ Chcete uložit změny? - - + + Name measurement column Název - - + + Full name measurement column Plný název - - + + Calculated value measurement column Vypočítaná hodnota - + Formula measurement column Vzorec - + Base value measurement column Základní hodnota @@ -17084,40 +17108,40 @@ Chcete uložit změny? Žádný - + Invalid link - + Known measurements %1 - - + + Description measurement column Popis - - - + + + Shift measurement column - + Empty list Prázdný - - - + + + %1 shift %1 posun @@ -17134,22 +17158,22 @@ Chcete uložit změny? Nelze převést hodnotu posunu na dvojnásobek ve sloupci %1. - + Millimeters Milimetry - + Inches Palce - + Centimeters Centimetry - + Degrees Stupně @@ -17175,7 +17199,7 @@ Chcete uložit změny? - + 0 results 0 výsledků @@ -18335,12 +18359,12 @@ Chcete uložit změny? - + None Žádný - + Known measurements %1 @@ -18654,27 +18678,26 @@ Chcete uložit změny? Tuto hladkou křivku (křivka spline) nelze rozstřihnout - Unable to cut curve '%1'. The curve is too short. - Nelze oříznout křivku '%1'. Křivka je příliš krátká. + Nelze oříznout křivku '%1'. Křivka je příliš krátká. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Křivka '%1'. Délka vyjmuté části (%2) je příliš malá. Vylaďte ji na nejmenší hodnotu. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Křivka '%1'. Délka vyjmuté části je příliš malá. Vylaďte ji na nejmenší hodnotu. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Křivka '%1'. Délka vyjmuté části (%2) je příliš velká. Vylaďte ji na největší hodnotu. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Křivka '%1'. Délka vyjmuté části je příliš velká. Vylaďte ji na největší hodnotu. @@ -19608,26 +19631,26 @@ Chcete uložit změny? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Křivka '%1'. Délka vyjmuté části (%2) je příliš malá. Vylaďte ji na nejmenší hodnotu. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Křivka '%1'. Délka vyjmuté části je příliš malá. Vylaďte ji na nejmenší hodnotu. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Křivka '%1'. Délka vyjmuté části (%2) je příliš velká. Vylaďte ji na největší hodnotu. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Křivka '%1'. Délka vyjmuté části je příliš velká. Vylaďte ji na největší hodnotu. @@ -19712,21 +19735,39 @@ Chcete uložit změny? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 Chyba při přípravě dat pro rozvržení: Podrobnost '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 Chyba při přípravě dat pro rozvržení: List papíru rozvržení <= 0 - + Error of preparing data for layout: List of details is empty Chyba při přípravě dat pro rozvržení: Seznam podrobností je prázdný + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19738,12 +19779,12 @@ Chcete uložit změny? VCommandLine - + Path to custom measure file (export mode). Cesta k vlastnímu souboru s rozměry (režim vyvedení). - + The measure file Soubor s rozměry @@ -19752,7 +19793,7 @@ Chcete uložit změny? Číslo odpovídající výstupnímu formátu (výchozí = 0, režim vyvedení): - + Format number Číslo formátu @@ -19761,18 +19802,18 @@ Chcete uložit změny? Číslo odpovídající předloze pro stranu (výchozí = 0, režim vyvedení): - - + + Template number Číslo předlohy - + The page width Šířka strany - + The measure unit Jednotka rozměrů @@ -19785,7 +19826,7 @@ Chcete uložit změny? Úhel - + Auto crop unused length (export mode). Automaticky ořezat nepoužívanou délku (režim vyvedení). @@ -19802,7 +19843,7 @@ Chcete uložit změny? Jednotky rozvržení (papíru s výjimkou px, režim vyvedení). - + The unit Jednotka @@ -19819,7 +19860,7 @@ Chcete uložit změny? Šířka sloupce x2, měřená v jednotkách rozvržení. (režim vyvedení). - + The gap width Šířka sloupce @@ -19828,7 +19869,7 @@ Chcete uložit změny? Nastavit skupiny rozvržení (režim vyvedení): - + Grouping type Typ skupiny @@ -19837,7 +19878,7 @@ Chcete uložit změny? Nelze společně použít formát strany a výslovnou velikost/jednotky strany. - + Page height, width, units must be used all 3 at once. Výška, šířka a jednotky stranyse musí použít všechny 3 najednou. @@ -19852,7 +19893,7 @@ Chcete uložit změny? - + Unsupported paper units. Nepodporované rozměry (velikosti) papíru. @@ -19862,8 +19903,8 @@ Chcete uložit změny? Nepodporované rozměry (velikosti) rozvržení. - - + + Export options can be used with single input file only. Volby pro vyvedení lze použít jen s jedním vstupním souborem. @@ -19872,17 +19913,17 @@ Chcete uložit změny? Spustit program ve zkušebním režimu. Program v tomto režimu nahraje jeden soubor se střihem a tiše se ukončí bez ukázání hlavního okna. Klíč má přednost před klíčem '%1'. - + Test option can be used with single input file only. Zkušební volbu lze používat jen s jedním vstupním souborem. - + The base filename of exported layout files. Use it to enable console export mode. Název základního souboru vyvedených souborů rozvržení. Tento použijte k zapnutí režimu vyvedené v konzoli. - + The base filename of layout files Název základního souboru souborů rozvržení @@ -19891,7 +19932,7 @@ Chcete uložit změny? Cesta k výstupní cílové složce. - + The destination folder Cílová složka @@ -19912,12 +19953,12 @@ Chcete uložit změny? Hodnota výšky - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Šířka strany v nynějších jednotkách jako 12.0 (nelze použít s "%1", režim vyvedení). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Výška strany v nynějších jednotkách jako 12.0 (nelze použít s "%1", režim vyvedení). @@ -19948,22 +19989,22 @@ Chcete uložit změny? Přehlížet tisk okrajů (režim vyvedení). Nastavit všechny okraje stran na 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Levý okraj strany v nynějších jednotkách jako 3.0 (režim vyvedení). Pokud není nastaven, použije se hodnota výchozí tiskárny. Nebo 0, pokud nebyla nalezena žádná tiskárna. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Pravý okraj strany v nynějších jednotkách jako 3.0 (režim vyvedení). Pokud není nastaven, použije se hodnota výchozí tiskárny. Nebo 0, pokud nebyla nalezena žádná tiskárna. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Horní okraj strany v nynějších jednotkách jako 3.0 (režim vyvedení). Pokud není nastaven, použije se hodnota výchozí tiskárny. Nebo 0, pokud nebyla nalezena žádná tiskárna. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Dolní okraj strany v nynějších jednotkách jako 3.0 (režim vyvedení). Pokud není nastaven, použije se hodnota výchozí tiskárny. Nebo 0, pokud nebyla nalezena žádná tiskárna. @@ -19972,32 +20013,32 @@ Chcete uložit změny? Délka posunutí se musí používat společně s jednotkami posunutí. - + Gap width must be used together with shift units. Šířka sloupce se musí používat společně s jednotkami posunutí. - + Left margin must be used together with page units. Levý okraj se musí používat společně se jednotkami stránky. - + Right margin must be used together with page units. Pravý okraj se musí používat společně se jednotkami stránky. - + Top margin must be used together with page units. Horní okraj se musí používat společně se jednotkami stránky. - + Bottom margin must be used together with page units. Dolní okraj se musí používat společně se jednotkami stránky. - + The path to output destination folder. By default the directory at which the application was started. Cesta k výstupní cílové složce. Ve výchozím nastavení adresář, v němž byl program spuštěn. @@ -20030,12 +20071,12 @@ Chcete uložit změny? Otočení ve stupních (jedno z předem vymezených, režim vyvedení). Výchozí hodnota je 180. 0 je žádné otočení. Platné hodnoty: %1. Každá hodnota ukazuje, kolikrát budou jednotlivosti (díly střihu) otočeny. Například 180 znamená, že to bude dvakrát (360/180=2) o 180 stupňů. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Spojit strany, pokud je to možné (režim vyvedení). Největší hodnota je omezená QImage, který podporuje jen obrázky s rozlišením nejvíce 32768 x 32768 obrazových bodů (px). - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Uložit délku listu, pokud je nastavena (režim vyvedení). Tato volba programu řekne, aby použil co možná nejvíce z šířky listu. Jakost rozvržení se při použití tohoto nastavení může zhoršit. @@ -20044,17 +20085,17 @@ Chcete uložit změny? Posunutí změřených délek rozvržení v jednotkách rozvržení. (režim vyvedení). Volba ukazuje, kolik bodů podél okraje se použije na vytvoření rozvržení. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. Šířka sloupce rozvržení x2, měřeno v jednotkách rozvržení. (režim vyvedení). Nastavuje vzdálenost mezi jednotlivostmi (díly střihu) a listem. - + Sets layout groupping cases (export mode): %1. Nastaví případy seskupení rozvržení (režim vyvedení): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Spustit program ve zkušebním režimu. Program v tomto režimu nahraje jeden soubor se střihem a tiše se ukončí bez ukázání hlavního okna. Klíč má přednost před klíčem '%1'. @@ -20071,7 +20112,7 @@ Chcete uložit změny? Délka posunutí/vyrovnání se musí používat společně s jednotkami posunutí. - + Number corresponding to output format (default = 0, export mode): Číslo odpovídající výstupnímu formátu (výchozí = 0, režim vyvedení): @@ -20081,316 +20122,321 @@ Chcete uložit změny? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Zakázat škálování pro obrazovky s velkým rozlišením. Tuto volbu zvolte, pokud máte potíže se škálováním (ve výchozím nastavení je škálování povoleno). Jinou možností je použít proměnnou prostředí %1. - + Export dxf in binary form. Vyvést DXF v binární formě. - + Show/hide grainline when export layout. - + Export text as paths. Vyvést text jako cesty. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Vyvést jen jednotlivosti (díly střihu). Vyvést jednotlivosti (díly střihu), jak jsou umístěny v režimu jednotlivostí (dílů střihu). Všechny volby týkající se rozvržení se budou přehlížet. - + Export only details that match a piece name regex. Vyvést jen jednotlivosti (díly střihu), jež odpovídají regulárnímu výrazu názvu dílu. - + The name regex Regulární výraz názvu - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. Vyvést do CSV s hlavičkou. Ve výchozím nastavení zakázáno. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Zadejte kodek, který se použije k uložení dat. Seznam podporovaných kodeků poskytovaný Qt. Výchozí hodnota závisí na systému. V operačním systému Windows bude kodek založen na nastavení jazyka systému. U unixových systémů může kodek začít používat knihovnu iconv, pokud není nalezen žádný kodek pro jazykové nastavení. Platné hodnoty pro tuto instalaci: - + Codec name Název kodeku - + Specify csv separator character. Default value is '%1'. Valid characters: Zadat znak oddělovače CSV. Výchozí hodnota je '%1'. Platné znaky: - + Separator character Znak oddělovače - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Vyvolání tohoto příkazu povolí vyvedení konečných měr. Zadejte cestu k souboru CSV s konečnými mírami. Cesta musí obsahovat cestu k adresáři a název souboru. Může být absolutní nebo relativní. V případě relativní cesty se použije nynější pracovní adresář k propočítání cílové cesty. - + Path to csv file Cesta k souboru CSV - + Number corresponding to layout page template (default = 0, export mode): Číslo odpovídající předloze pro stranu rozvržení (výchozí = 0, režim vyvedení): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Číslo odpovídající předloze pro stranu dlaždicového PDF (výchozí = 0, režim vyvedení s formátem dlaždicového PDF): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Levý okraj dlaždicové strany v nynějších jednotkách jako 3.0 (režim vyvedení). Pokud není nastaven, použije se výchozí hodnota 1 cm. - - + + The left margin Levý okraj - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Pravý okraj dlaždicové strany v nynějších jednotkách jako 3.0 (režim vyvedení). Pokud není nastaven, použije se výchozí hodnota 1 cm. - - + + The right margin Pravý okraj - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Horní okraj dlaždicové strany v nynějších jednotkách jako 3.0 (režim vyvedení). Pokud není nastaven, použije se výchozí hodnota 1 cm. - - + + The top margin Horní okraj - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Dolní okraj dlaždicové strany v nynějších jednotkách jako 3.0 (režim vyvedení). Pokud není nastaven, použije se výchozí hodnota 1 cm. - - + + The bottom margin Dolní okraj - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Nastavit natočení dlaždicové strany na "na šířku" (režim vyvedení). Výchozí hodnota není nastavena na "na výšku". - + Cannot use pageformat and page explicit size together. Nelze společně použít formát strany a výslovnou velikost strany. - + Tiled left margin must be used together with page units. Dlaždicový levý okraj se musí používat společně se jednotkami stránky. - + Tiled right margin must be used together with page units. Dlaždicový pravý okraj se musí používat společně se jednotkami stránky. - + Tiled top margin must be used together with page units. Dlaždicový horní okraj se musí používat společně se jednotkami stránky. - + Tiled bottom margin must be used together with page units. Dlaždicový dolní okraj se musí používat společně se jednotkami stránky. - + Page measure units (export mode). Valid values: %1. Jednotky pro měření strany (režim vyvedení). Platné hodnoty: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. Tuto volbu použijte na zrušení uživatelského materiálu stanoveného ve střihu. Hodnota musí být ve tvaru <číslo>@<název uživatelského materiálu>. Číslo má být v rozsahu od 1 po %1. Například, 1@Fabric2. Klíč lze použít vícekrát. Nemúčinkuje v režimu grafického uživatelského rozhraní. - + User material Uživatelský materiál - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. Udělat všechna varování ohledně zpracování do chyb. Účinkuje jen v režimu konzole. Použijte k přinucení Valentiny k okamžitému ukončení, pokud střih obsahuje varování týkající se zpracování. - + Invalid user material '%1'. Separator is missing. Neplatný uživatelský materiál '%1'. Chybí oddělovač. - + Invalid user material '%1'. Wrong material number. Neplatný uživatelský materiál '%1'. Špatné číslo materiálu. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. Přepněte natočení předlohy stránky na šířku (režim vyvedení). Tato volba má vliv pouze na jednu z předem stanovených předloh stránek. - + The page height Výška strany - + Order detail to follow grainline direction (export mode). Přikázat podrobnost, aby se sledoval směr dráhy nitě (režim vyvedení). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. <Time> v minutách daných algoritmu k nalezení nejlepšího rozvržení. Čas musí být v rozsahu od 1 minuty do 60 minut. Výchozí hodnota je 1 minuta. - + Time Čas - + Coefficient Součinitel - + Time must be in range from 1 minute to 60 minutes. Čas musí být v rozsahu od 1 minuty do 60 minut. - + Follow manual priority over priority by square (export mode). Dodržovat ruční přednost před předností podle pole (režim vyvedení). - + Nest quantity copies of each piece (export mode). Naskládat množství kopií každého dílu (režim vyvedení). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. Nastavit účinnost rozvržení <coefficient>. Součinitel účinnosti rozvržení je poměr plochy, kterou zabírají díly, k ohraničujícímu obdélníku ze všech dílů. Pokud naskládání vedle sebe dosáhne požadované úrovně, postup se zastaví. Pokud je hodnota 0, nebude provedeno žádné ověření. Součinitel musí být v rozsahu od 0 do 100. Výchozí hodnota je 0. - + Coefficient must be in range from 0 to 100. Součinitel musí být v rozsahu od 0 do 100. - + Auto crop unused width (export mode). Automaticky ořezat nepoužívanou šířku (režim vyvedení). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). Nastavit vodorovné měřítko od 0.01 do 3.0 (výchozí = 1.0, režim vyvedení). - + Horizontal scale Vodorovné měřítko - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). Nastavit svislé měřítko od 0.01 do 3.0 (výchozí = 1.0, režim vyvedení). - + Vertical scale Svislé měřítko - + Prefer one sheet layout solution (export mode). Dát přednost řešení rozvržení na jednom listu (režim vyvedení). - + Invalid dimension A value. Neplatná hodnota rozměru A. - + Invalid dimension B value. Neplatná hodnota rozměru B. - + Invalid dimension C value. Neplatná hodnota rozměru C. - + Set base for dimension A in the multisize measurements units (export mode). Nastavte základní hodnotu pro rozměr A v jednotkách měření více velikostí (režim vyvedení). - + The dimension A base Základní hodnota rozměru A - + Set base for dimension B in the multisize measurements units (export mode). Nastavte základní hodnotu pro rozměr B v jednotkách měření více velikostí (režim vyvedení). - + The dimension B base Základní hodnota rozměru B - + Set base for dimension C in the multisize measurements units (export mode). Nastavte základní hodnotu pro rozměr C v jednotkách měření více velikostí (režim vyvedení). - + The dimension C base Základní hodnota rozměru C @@ -20415,47 +20461,47 @@ Chcete uložit změny? Neplatná šířka mezery. - + Invalid layout page left margin. Levý okraj stránky s neplatným rozložením. - + Invalid layout page right margin. Pravý okraj stránky s neplatným rozložením. - + Invalid layout page top margin. Horní okraj stránky s neplatným rozložením. - + Invalid layout page bottom margin. Dolní okraj stránky s neplatným rozložením. - + Invalid tiled page left margin. Neplatný levý okraj stránky s dlaždicemi. - + Invalid tiled page right margin. Neplatný pravý okraj stránky s dlaždicemi. - + Invalid tiled page top margin. Neplatný horní okraj stránky s dlaždicemi. - + Invalid tiled page bottom margin. Neplatný dolní okraj stránky s dlaždicemi. - + Layout units (as paper's one except px, export mode). Default units cm. Jednotky rozvržení (papíru s výjimkou px, režim vyvedení). Výchozí jednotky cm. @@ -20465,7 +20511,7 @@ Chcete uložit změny? Nahrát díly střihu z nezpracovaného datového souboru rozvržení. - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. Přehlížet tisk okrajů (režim vyvedení). Použít v případě potřeby místa celého papíru. V případě pozdějšího tisku musíte počítat se samotnými okraji. @@ -20795,7 +20841,7 @@ Chcete uložit změny? VLayoutConverter - + Could not change version. Nebylo možné změnit verzi. @@ -20808,73 +20854,73 @@ Chcete uložit změny? Nelze uložit soubor '%1'. Chyba: %2. - + Cannot set printer page size Nelze nastavit velikost strany tiskárny - + Cannot set printer margins Nelze nastavit okraje tiskárny - + Can't open file '%1' Nelze otevřít soubor '%1' - + Export raw layout data failed. %1. Vyvedení nezpracovaných dat rozvržení se nezdařilo. %1. - + Creating file '%1' failed! %2 Vytvoření souboru '%1' se nezdařilo! %2 - + Can't create an AAMA dxf file. Nelze vytvořit soubor AAMA dxf. - + Can't create an ASTM dxf file. Nelze vytvořit soubor ASTM dxf. - - + + Can't create an HP-GL file. - + (flat) files (ploché) soubory - + files Soubory - + Image files Obrázkové soubory - + tiled dlážděný - + Numerical control Číslicové ovládání - + Raw Layout Data Nezpracovaná data rozvržení @@ -20887,12 +20933,12 @@ Chcete uložit změny? VLayoutPiece - + Piece %1 doesn't have shape. Díl %1 nemá tvar. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21196,8 +21242,8 @@ Chcete uložit změny? Neumístěné díly - - + + Pieces of Díly @@ -21300,12 +21346,12 @@ Chcete uložit změny? VPGraphicsPiece - + Move to Přesunout do - + Remove from Sheet Odstranit z listu @@ -21321,37 +21367,37 @@ Chcete uložit změny? VPLayoutFileReader - + Piece Díl - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' Obdržena prázdná vlastnost '%1' - + Error in line %1. Seam allowance is empty. Chyba na řádku %1. Švová záložka je prázdná. - + Error in line %1. Internal path shape is empty. Chyba v řádku %1. Tvar vnitřní cesty je prázdný. - + Unexpected tag %1 in line %2 Neočekávaná značka %1 v řádku %2 - + Piece %1 invalid. %2 @@ -21403,7 +21449,7 @@ Chcete uložit změny? - + Properties Vlastnosti @@ -21560,9 +21606,9 @@ Chcete uložit změny? - - - + + + Export Vyvést @@ -21612,84 +21658,84 @@ Chcete uložit změny? Varování díly nedovoleny - + zoom Zvětšení - - + + Scale Měřítko - + &Open &Otevřít - + &Save &Uložit - + Save &As Uložit j&ako - + &Import Raw Layout Data &Zavést nezpracovaná data rozvržení - + E&xit &Ukončit - + &New &Nový - + About &Qt O &Qt - + About &Puzzle O programu &Puzzle - + Zoom in Přiblížit - + Zoom out Oddálit - + Zoom 1:1 Zvětšení 1:1 - + Zoom fit best Přizpůsobit velikost oknu aplikace - + Zoom sheet Zvětšit list - - + + Preferences Nastavení @@ -21710,7 +21756,7 @@ Chcete uložit změny? Vytvoření rozvržení se nezdařilo. - + Could not extract data from file '%1'. %2 Nepodařilo se vytáhnout data ze souboru '%1'. %2 @@ -21733,102 +21779,102 @@ Chcete uložit změny? Palce - + Scale: Měřítko: - + untitled %1.vlt bez názvu %1.vlt - + untitled.vlt bez_názvu.vlt - + read only Pouze pro čtení - + Cannot read settings from a malformed .INI file. Nelze číst nastavení z poškozeného souboru .INI. - + Cannot save settings. Access denied. Nelze uložit nastavení. Přístup odepřen. - - - + + + Failed to open file, is it writable? Soubor se nepodařilo otevřít. Lze do něj zapisovat? - + &New Window &Nové okno - + Layout has been modified. Do you want to save your changes? - - + + Layout files Soubory rozvržení - - - + + + Open file Otevřít soubor - + Could not save the file Nepodařilo se uložit soubor - + layout Rozvržení - + Save as Uložit jako - + Failed to lock. This file already opened in another window. Nepodařilo se uzamknout. Tento soubor je již otevřen v jiném okně. - + Could not save file Nepodařilo se uložit soubor - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Nepodařilo se uzamknout. Tento soubor je již otevřen v jiném okně. Při zdvojeném vykonávání (2 kopie programu) může dojít ke střetům. - + Raw Layout files Soubory s nezpracovaným rozvržením - + About Qt O Qt @@ -21865,13 +21911,13 @@ Chcete uložit změny? - + Horizontal: Vodorovná: - + Vertical: Svislá: @@ -21954,71 +22000,76 @@ Chcete uložit změny? Zobrazit schéma dlaždic - + + Boundary together with notches + + + + Pieces gap: Dílová mezera: - + Export Layout Vyvést rozvržení - + Undo commands Zpět příkazy - + Add Sheet Přidat list - - + + Print Tisk - - + + Print preview Náhled před tiskem - - + + Print tiled Zobrazit dlaždicové - - + + Print preview tiled Náhled tisku dlaždicový - + Editor Editor - + Create or edit a watermark Vytvořit nebo upravit vodoznak - + Edit current Upravit nynější - + Load Nahrát - + Remove Odstranit @@ -22029,13 +22080,13 @@ Chcete uložit změny? - + &Undo &Zpět - + &Redo &Znovu @@ -22046,113 +22097,113 @@ Chcete uložit změny? Pixely - + Unsaved changes Neuložené změny - + Save… Uložit… - + Save Uložit - + Don't Save Neukládat - - + + Can't create a path Nelze vytvořit cestu - + Can't open file '%1' Nelze otevřít soubor '%1' - - + + Failed in flushing page to disk, disk full? Nepodařilo se dostat stránku na disk. Disk je plný? - - + + The layout is invalid. Rozvržení je neplatné. - + The layout is invalid. Piece out of bound. Do you want to continue export? Rozvržení je neplatné. Díl mimo plochu. Chcete pokračovat ve vyvádění? - + The layout is invalid. Pieces superposition. Do you want to continue export? Rozvržení je neplatné. Překrývání se dílů. Chcete pokračovat ve vyvádění? - + Sheet %1 List %1 - + translate pieces Přesunout díly - + rotate pieces Otočit díly - - + + For printing multipages document all sheet should have the same size. Pro tisk vícestránkového dokumentu musí mít všechny listy stejnou velikost. - - - - - - - - + + + + + + + + Print error Chyba při tisku - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Nelze pokračovat, protože ve vašem systému nejsou dostupné žádné tiskárny. - + Watermark files Soubory vodoznaku - - - - + + + + Unable to get sheet page settings Nelze získat nastavení strany listu @@ -22162,27 +22213,27 @@ Chcete uložit změny? Zobrazit číslo dlaždice - + Z value Hodnota Z - + Bottom Dole - + Down Dolů - + Up Nahoru - + Top Nahoře @@ -22192,12 +22243,12 @@ Chcete uložit změny? Působí pouze při tisku v aplikaci. Pro vyvedení se schématem dlaždic použijte samostatné nastavení - + sheet - + Piece %1 invalid. %2 @@ -22338,37 +22389,37 @@ Chcete uložit změny? Chyba při vytváření nebo aktualizaci záznamu typu "jednotlivost (díl střihu)" - + Error creating or updating single point Chyba při vytváření nebo aktualizaci jediného bodu - - + + Error creating or updating point of end line Chyba při vytváření nebo aktualizaci bodu na konci čáry - - + + Error creating or updating point along line Chyba při vytváření nebo aktualizaci bodu podél čáry - - + + Error creating or updating point of shoulder Chyba při vytváření nebo aktualizaci bodu ramene - - + + Error creating or updating point of normal Chyba při vytváření nebo aktualizaci bodu kolmice - - + + Error creating or updating point of bisector Chyba při vytváření nebo aktualizaci bodu osy úhlu @@ -22377,128 +22428,128 @@ Chcete uložit změny? Chyba při vytváření nebo aktualizaci bodu průsečíku čar - - + + Error creating or updating point of contact Chyba při vytváření nebo aktualizaci bodu dotyku - + Error creating or updating modeling point Chyba při vytváření nebo aktualizaci modelovacího bodu - + Error creating or updating height Chyba při vytváření nebo aktualizaci výšky - + Error creating or updating triangle Chyba při vytváření nebo aktualizaci trojúhelníku - + Error creating or updating point of intersection Chyba při vytváření nebo aktualizaci bodu průsečíku - - + + Error creating or updating cut spline point Chyba při vytváření nebo aktualizaci bodu vyjmutí hladké křivky (křivka spline) - - + + Error creating or updating cut spline path point Chyba při vytváření nebo aktualizaci bodu cesty vyjmutí hladké křivky (křivka spline) - - + + Error creating or updating cut arc point Chyba při vytváření nebo aktualizaci bodu vyjmutí oblouku - - + + Error creating or updating point of intersection line and axis Chyba při vytváření nebo aktualizaci bodu průsečíku čáry a osy - - + + Error creating or updating point of intersection curve and axis Chyba při vytváření nebo aktualizaci bodu průsečíku křivky a osy - + Error creating or updating line Chyba při vytváření nebo aktualizaci čáry - - + + Error creating or updating simple curve Chyba při vytváření nebo aktualizaci jednoduché křivky - - + + Error creating or updating curve path Chyba při vytváření nebo aktualizaci cesty křivky - + Error creating or updating modeling simple curve Chyba při vytváření nebo aktualizaci jednoduché křivky, záznamu typu "podrobnost křivky" - + Error creating or updating modeling curve path Chyba při vytváření nebo aktualizaci cesty křivky, záznamu typu "podrobnost cesty" - - - - + + + + Error creating or updating simple arc Chyba při vytváření nebo aktualizaci jednoduchého oblouku - + Error creating or updating modeling arc Chyba při vytváření nebo aktualizaci záznamu typu "podrobnost oblouku" - + Error creating or updating union details Chyba při vytváření nebo aktualizaci záznamu typu "spojení jednotlivostí (dílů střihu)" - + Error creating or updating point of intersection arcs Chyba při vytváření nebo aktualizaci bodu průsečíku oblouků - + Error creating or updating point of intersection circles Chyba při vytváření nebo aktualizaci bodu průsečíku kruhů - + Error creating or updating point from circle and tangent Chyba při vytváření nebo aktualizaci bodu průsečíku kruhu a tangenty - + Error creating or updating point from arc and tangent Chyba při vytváření nebo aktualizaci bodu průsečíku oblouku a tangenty - + Error creating or updating true darts Chyba při vytváření nebo aktualizaci vyrovnání délky záševku @@ -22515,17 +22566,17 @@ Chcete uložit změny? Neznámý typ bodu '%1'. - + Unknown spline type '%1'. Neznámý typ hladké křivky (křivka spline) '%1'. - + Unknown arc type '%1'. Neznámý typ oblouku '%1'. - + Unknown tools type '%1'. Neznámý typ nástroje '%1'. @@ -22535,75 +22586,75 @@ Chcete uložit změny? Chyba: nejedinečný identifikátor. - + Error creating or updating point of intersection curves Chyba při vytváření nebo aktualizaci bodu průsečíku křivek - + Error creating or updating simple interactive spline Chyba při vytváření nebo aktualizaci jednoduché interaktivní hladké křivky (křivka spline) - + Error creating or updating interactive spline path Chyba při vytváření nebo aktualizaci bodu interaktivní cesty hladké křivky (křivka spline) - + Error creating or updating cubic bezier curve Chyba při vytváření nebo aktualizaci kubické Bézierovy křivky - + Error creating or updating cubic bezier path curve Chyba při vytváření nebo aktualizaci cesty kubické Bézierovy křivky - - + + Error creating or updating operation of rotation Chyba při vytváření nebo aktualizaci operace otočení - + Unknown operation type '%1'. Neznámý typ operace '%1'. - + Error creating or updating operation of flipping by line Chyba při vytváření nebo aktualizaci operace přetočení podle čáry - + Error creating or updating operation of flipping by axis Chyba při vytváření nebo aktualizaci operace přetočení podle osy - - + + Error creating or updating operation of moving Chyba při vytváření nebo aktualizaci operace posunutí - + Error creating or updating point of line intersection Chyba při vytváření nebo aktualizaci bodu průsečíku čáry - - + + Error creating or updating simple elliptical arc Chyba při vytváření nebo aktualizaci jednoduchého elipsovitého oblouku - + Unknown elliptical arc type '%1'. Neznámý typ elipsovitého oblouku '%1'. - + Error creating or updating modeling elliptical arc Chyba při vytváření nebo aktualizaci modelovacího elipsovitého oblouku @@ -22613,34 +22664,34 @@ Chcete uložit změny? Jednotlivost (díl střihu) - + Unnamed path Nepojmenovaná cesta - - + + Error creating or updating a piece path Chyba při vytváření nebo aktualizaci cesty dílu - + Error creating or updating pin point Chyba při vytváření nebo aktualizaci bodu špendlíku - + Piece path doesn't contain nodes Cesta dílu neobsahuje uzly - - + + Error creating or updating place label Chyba při vytváření nebo aktualizaci popisu umístění - + Can't find increment '%1' @@ -24420,108 +24471,108 @@ Chyba kompatibility formátu nezpracovaného rozvržení: ActualFileVersion = %1 VToolSeamAllowance - - + + Current seam allowance Nynější švová záložka - + move pattern piece label Posunout popis dílu střihu - + resize pattern piece label Změnit velikost popisu dílu střihu - + rotate pattern piece label Otočit velikost popisu dílu střihu - + move pattern info label Posunout popis s údaji ke střihu - + resize pattern info label Změnit velikost popisu s údaji ke střihu - + rotate pattern info label Otočit popis s údaji ke střihu - + move grainline Posunout dráhu nitě - + resize grainline Změnit velikost dráhy nitě - + rotate grainline Otočit dráhu nitě - + Options Volby - + In layout V rozvržení - + Hide main path Skrýt hlavní cestu - + Reset piece label template - + Delete Smazat - + apply save detail options Použít uložit volby pro jednotlivosti (díly střihu) - + multi deletion Vícenásobné smazání - + Forbid flipping Zakázat přetočení - + Force flipping Vynutit přetočení - + This id (%1) is not unique. Tento identifikátor (%1) není jedinečný. - + Tool was used after deleting. Nástroj byl použit po smazání. diff --git a/share/translations/valentina_de_DE.ts b/share/translations/valentina_de_DE.ts index b909854da..08a446b3d 100644 --- a/share/translations/valentina_de_DE.ts +++ b/share/translations/valentina_de_DE.ts @@ -1296,22 +1296,22 @@ Move on top - + Ganz nach oben schieben Move up - Anheben + Anheben Move down - Absenken + Absenken Move on bottom - Ganz nach unten schieben + Ganz nach unten schieben @@ -4767,40 +4767,40 @@ Grundsatz der Auswahl des nächsten Schnittteils - + Three groups: big, middle, small Drei Gruppen: groß, mittel, klein - + Two groups: big, small Zwei Gruppen: groß, klein - + Descending area Absteigender Bereich - - + + Millimiters Millimeter - - + + Centimeters Zentimeter - - + + Inches Zoll - + Pixels Pixel @@ -4810,22 +4810,22 @@ Layout erstellen - + Auto crop unused length Automatisches Zuschneiden der ungenutzten Länge - + Unite pages (if possible) Seiten zusammenfassen (wenn möglich) - + Gap width: Spaltweite: - + Save length of the sheet Blattlänge speichern @@ -4906,7 +4906,7 @@ Benutzerdefiniert - + Wrong fields. Falsche Felder. @@ -4919,7 +4919,7 @@ Apply settings anyway? Einstellungen trotzdem anwenden? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4930,7 +4930,7 @@ Einstellungen trotzdem anwenden? ⇥Absteigende Fläche = 2 - + Layout options Layoutoptionen @@ -4939,7 +4939,7 @@ Einstellungen trotzdem anwenden? Verschiebungs-/Ausgleichslänge: - + Rule for choosing the next workpiece Regel zur Auswahl des nächsten Schnittteils @@ -4948,17 +4948,17 @@ Einstellungen trotzdem anwenden? Das Erlauben von besonders hohen Seiten verschnellert das Erstellen. - + Divide into strips In Streifen aufteilen - + Multiplier Multiplikator - + Set multiplier for length of the biggest workpiece in layout. Multiplikator für die Länge des größten Schnittteils im Layout festlegen. @@ -4967,7 +4967,7 @@ Einstellungen trotzdem anwenden? x - + Enabling for sheets that have big height will speed up creating. Das Erlauben von besonders hohen Seiten verschnellert das Erstellen. @@ -4977,7 +4977,7 @@ Einstellungen trotzdem anwenden? Drucker: - + None Printer Keine @@ -5008,7 +5008,7 @@ Einstellungen trotzdem anwenden? Ränder ignorieren - + Margins go beyond printing. Apply settings anyway? @@ -5017,63 +5017,78 @@ Apply settings anyway? Einstellungen trotzdem anwenden? - + Follow grainline Folge der Fadenlauf-Linie - + Time: Zeit: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. Zeit die dem Algorithmus bleibt um das beste Layout zu finden. - + Efficiency: Effizienz: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority Manuelle Rangordnung - + Nest quantity of copies according to piece settings. Verschachtele eine Anzahl Kopien entsprechend der Schnittteileinstellungen. - + Nest quantity Verschachtelungs Anzahl - + Auto crop unused width Automatisches Bechneiden unbenutzter Breite - + Prefer one sheet solution Einblattlösung bevorzugen - + min minutes min - + Enable this option to prefer getting one sheet solutions. Aktiviere diese Option, um bevorzugt Einblattlösungen zu erhalten. @@ -8145,7 +8160,7 @@ Einstellungen trotzdem anwenden? Layout speichern - + File name: Dateiname: @@ -8182,8 +8197,8 @@ Einstellungen trotzdem anwenden? Pfad zum Zielordner auswählen - - + + File base name Datei-Basisname @@ -8217,37 +8232,42 @@ Einstellungen trotzdem anwenden? + Boundary together with notches + + + + Not available options - + Margins Ränder - + Right: Rechts: - + Left: Links: - + Top: Oben: - + Bottom: Unten: - + Paper format Papierformat @@ -8257,20 +8277,20 @@ Einstellungen trotzdem anwenden? Auswählen… - - - - + + + + cm cm - + Templates: Vorlagen: - + Orientation: Ausrichtung: @@ -8280,17 +8300,17 @@ Einstellungen trotzdem anwenden? Optionen - + Scale Skalieren - + Horizontal: Horizontal: - + Vertical: Vertikal: @@ -9805,22 +9825,22 @@ Einstellungen trotzdem anwenden? Move on top - + Ganz nach oben schieben Move up - Anheben + Anheben Move down - Absenken + Absenken Move on bottom - Ganz nach unten schieben + Ganz nach unten schieben @@ -10646,27 +10666,27 @@ Einstellungen trotzdem anwenden? Punkt - + Point along perpendicular Punkt auf einer Normalen - + Perpendicular point along line Lotfußpunkt auf einer Linie - + Point along bisector Punkt entlang einer Winkelhalbierenden - + Point at distance and angle Punkt mit Abstand und Winkel - + Point at distance along line Punkt in einer Distanz auf einer Linie @@ -10679,12 +10699,12 @@ Einstellungen trotzdem anwenden? Linie - + Line between points Verbindungslinie zwischen zwei Punkten - + Point at line intersection Linienschnittpunkt @@ -10701,7 +10721,7 @@ Einstellungen trotzdem anwenden? Werkzeuge zur Bogenerzeugung. - + Arc Bogen @@ -10729,210 +10749,215 @@ Einstellungen trotzdem anwenden? &Schnittteil - + Measurements Maße - + Window Fenster - + Toolbar files Symbolleiste Datei - + ToolBar modes Symbolleiste Modus - + Toolbar pattern Symbolleiste Schnittmuster - + Toolbar options Symbolleiste Optionen - + Toolbar tools Symbolleiste Werkzeuge - + Tool options Werkzeugeinstellungen - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Neu - + &New &Neu - + Create a new pattern Neues Schnittmuster erstellen - + Open Öffnen - + &Open &Öffnen - + Open file with pattern Datei mit Schnittmuster öffnen - - + + Save Speichern - + &Save &Speichern - + Save pattern Schnittmuster speichern - + Interactive tools interaktive Tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Speichern &unter... - + Save not yet saved pattern Speichere ungesichertes Schnittmuster - + Draw Zeichnen - + Details Details - + Pointer tools Zeigerwerkzeuge - + New pattern piece Neues Schnittteil - + Add new pattern piece Neues Schnittteil hinzufügen - + Change the label of pattern piece Label des Schnittteils ändern @@ -10945,57 +10970,57 @@ Einstellungen trotzdem anwenden? Variablentabellen - - + + History Chronik - + About &Qt Über &Qt - + &About Valentina &Über Valentina - + E&xit Valentina &beenden - + Exit the application Programm beenden - + Preferences Einstellungen - + Pattern properties Schnittmustereigenschaften - - + + Zoom in Vergrößern - + zoom in Vergrößern - - - + + + Zoom out Verkleinern @@ -11012,7 +11037,7 @@ Einstellungen trotzdem anwenden? Originalgröße - + Zoom fit best In Ansicht einpassen @@ -11029,7 +11054,7 @@ Einstellungen trotzdem anwenden? Programmfehler melden... - + Report bug Programmfehler melden @@ -11046,8 +11071,8 @@ Einstellungen trotzdem anwenden? Onlinehilfe anzeigen - - + + Pattern piece %1 Schnittteil %1 @@ -11140,7 +11165,7 @@ Einstellungen trotzdem anwenden? Kurve auswählen - + About Qt Über Qt @@ -11180,7 +11205,7 @@ Einstellungen trotzdem anwenden? - + Open file Datei öffnen @@ -11197,7 +11222,7 @@ Einstellungen trotzdem anwenden? - + Error empty parameter. Fehler: Leerer Parameter. @@ -11213,17 +11238,17 @@ Einstellungen trotzdem anwenden? Fehler beim Auswerten der Datei (std::bad_alloc). - + Bad id. Ungültige ID. - + File saved Datei gespeichert - + untitled.val unbenannt.val @@ -11235,23 +11260,23 @@ Sollen die Änderungen gespeichert werden? - + &Undo &Rückgängig - + &Redo &Wiederholen - + Pattern piece: Schnittteil: - + Enter a new label for the pattern piece. Neues Label für das Schnittteil eingeben. @@ -11270,8 +11295,8 @@ Sollen die Änderungen gespeichert werden? - - + + File error. Dateifehler. @@ -11280,12 +11305,12 @@ Sollen die Änderungen gespeichert werden? Datei geladen - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina wurde nicht korrekt beendet. Zuletzt geöffnete Dateien (%1) laden? - + Reopen files. Zuletzt geöffnete Dateien laden. @@ -11298,12 +11323,12 @@ Sollen die Änderungen gespeichert werden? Individuelle Maße (*.vit) - + Special point on shoulder Spezieller Punkt an der Schulter - + Triangle tool Dreieckswerkzeug @@ -11312,42 +11337,42 @@ Sollen die Änderungen gespeichert werden? Laufender Schnittpunkt auf Kreisbogen - + Point from X and Y of two other points Punkt von X und Y zwei anderer Punkte - + Point intersect line and axis Punkt schneidet Linie und Achse - + Simple curve Einfache Kurve - + Curved path Gekrümmter Pfad - + Segmenting a simple curve Einfache Kurve unterteilen - + Segment a curved path Gekrümmten Pfad unterteilen - + Point intersect curve and axis Schnittpunkt zwischen Kurve und Achse - + Segment an arc Einen Bogen unterteilen @@ -11360,7 +11385,7 @@ Sollen die Änderungen gespeichert werden? Tool für die Nahtzugabe - + Union tool Vereinigen-Werkzeug @@ -11369,12 +11394,12 @@ Sollen die Änderungen gespeichert werden? Symbolleiste - + Last Tool Letztes Werkzeug - + Activate last used tool again Zuletzt benutztes Werkzeug auswählen @@ -11384,33 +11409,33 @@ Sollen die Änderungen gespeichert werden? Punkt für X-Wert (vertikal) auswählen - + Mode Modus - + Pointer Zeiger - + Config pattern piece Schnittteil konfigurieren - + Layout Layout - + Show Curve Details Kurvendetails anzeigen - + Show/hide control points and curve direction Kontrollpunkte und Kurvenrichtung anzeigen/verbergen @@ -11419,27 +11444,27 @@ Sollen die Änderungen gespeichert werden? Werkzeuge - + Point of intersection arcs Schnittpunkt der Bögen - + Point of intersection circles Schnittpunkt der Kreise - + Point from circle and tangent Schnittpunkt des Bogens und Tangente - + Point from arc and tangent Schnittpunkt des Bogens und Tangente - + Arc with given length Bogen mit vorgegebener Länge @@ -11448,7 +11473,7 @@ Sollen die Änderungen gespeichert werden? Einstellungen - + Layout pages Seiten in Layout darstellen @@ -11469,27 +11494,27 @@ Sollen die Änderungen gespeichert werden? Teilen und Speichern eines Layouts in kleinere Seiten - + Print Drucken - + Print tiled PDF Kachelblätter als PDF drucken - + Split and print a layout into smaller pages (for regular printers) Teilen und Speichern eines Layouts in kleinere Seiten (für normale Drucker) - + Print preview Druckvorschau - + Print preview original layout Druckvorschau mit Originallayout @@ -11498,8 +11523,8 @@ Sollen die Änderungen gespeichert werden? Exportieren als... - - + + Export original layout Originallayout exportieren @@ -11541,7 +11566,7 @@ Sollen die Änderungen gespeichert werden? - + Layout mode Layoutmodus @@ -11550,7 +11575,7 @@ Sollen die Änderungen gespeichert werden? Sie können nicht in den Layoutmodus wechseln. Bitte erstellen Sie zuerst ein Schnittteil. - + Unsaved changes Ungespeicherte Änderungen @@ -11589,12 +11614,12 @@ Sollen die Änderungen gespeichert werden? Standardmaße (*.vst);;Individuelle Maße (*.vit) - + You can't export empty scene. Sie können ein leeres Layout nicht exportieren. - + Create new Layout Neues Layout erstellen @@ -11626,7 +11651,7 @@ Sollen die Änderungen gespeichert werden? Maßdatei enthält ungültiges Maß(e). - + Measurement file has unknown format. Maßdatei hat ein unbekanntes Format. @@ -11653,13 +11678,13 @@ Sollen die Änderungen gespeichert werden? Maße konnten nicht synchronisiert werden. - + Couldn't update measurements. Maße konnten nicht aktualisiert werden. - - + + The measurements file '%1' could not be found. Die Maßdatei '%1' konnte nicht gefunden werden. @@ -11668,7 +11693,7 @@ Sollen die Änderungen gespeichert werden? Die Maßdatei <br/><br/> <b>%1</b> <br/><br/> konnte nicht gefunden werden. Möchten Sie den Speicherort der Datei aktualisieren? - + Loading measurements file Lädt die Maßdatei @@ -11685,9 +11710,9 @@ Sollen die Änderungen gespeichert werden? Größe konnte nicht bestimmt werden. Datei nicht geöffnet. - - - + + + The method %1 does nothing in GUI mode Die Methode %1 hat keine Auswirkung im GUI-Modus @@ -11704,45 +11729,45 @@ Sollen die Änderungen gespeichert werden? Höhe konnte nicht bestimmt werden. Datei nicht geöffnet. - - - - + + + + Export error. Export-Fehler. - + Please, provide one input file. Bitte stellen Sie eine Eingabedatei zur Verfügung. - + Print an original layout Originales Layout drucken - + Preview tiled PDF Vorschau der PDF Kachelblätter - + Print preview tiled layout Druckvorschau gekacheltes Layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Modus zur Arbeit mit Schnittteilen. Diese Schnittteile sind die Basis für den nächsten Schritt &quot;Details mode&quot;. Bevor Sie mit &quot;Details mode&quot; weiterarbeiten können, müssen Sie zunächst ein Detail erzeugen.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Modus zur Arbeit mit Details. Bevor Sie mit &quot;Details mode&quot; weitermachen können, müssen Sie zunächst ein Detail erstellen &quot;Draw mode&quot;. In dieser Phase erstellte Details werden für die Erstellung eines Layouts verwendet. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Modus zum Erstellen von Details. Dieser Modus ist verfügbar, wenn mindestens ein Detail erstellt wurde &quot;Details mode&quot;. Das Layout kann mit ihrem gewünschten Dateiformat exportiert und auf ihrer Festplatte gespeichert werden.</p></body></html> @@ -11765,7 +11790,7 @@ Sollen die Änderungen gespeichert werden? Geladene Maße, die im Schnittteil verwendet werden, können nicht gelöscht werden. - + True darts Abnäherlänge ausgleichen @@ -11789,7 +11814,7 @@ Sollen die Änderungen gespeichert werden? Speichern... - + Don't Save Nicht speichern @@ -11822,7 +11847,7 @@ Sollen die Änderungen gespeichert werden? Programmfehler melden... - + Point intersection curves Schnittpunkt zwischen zwei Kurven @@ -11840,7 +11865,7 @@ Sollen die Änderungen gespeichert werden? Maße wurden geändert. Sollen die Maße jetzt synchronisiert werden? - + Curve tool which uses point as control handle Kurve, die einen Punkt als Kontrollmethode verwendet @@ -11875,14 +11900,14 @@ Sollen die Änderungen gespeichert werden? Ein oder mehr Objekte auswählen, <b>Enter</b> - Erstellen abschließen - + Rotate objects Objekte drehen - - - + + + Close pattern Schnittmuster schließen @@ -11895,12 +11920,12 @@ Sollen die Änderungen gespeichert werden? Werkzeug-Zeiger - + Midpoint between two points Mittelpunkt zwischen zwei Punkten - + Group Gruppe @@ -11921,8 +11946,8 @@ Sollen die Änderungen gespeichert werden? Sie können nicht in den Layoutmodus wechseln. Bitte verwenden Sie mindestens ein Detail im Layout. - - + + Original zoom Originialgröße @@ -11952,22 +11977,22 @@ Sollen die Änderungen gespeichert werden? Größe: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? Die Maß-Datei <br/><br/> <b>%1</b> <br/><br/> kann nicht gefunden werden. Möchten Sie den Speicherort der Datei aktualisieren? - + Flipping objects by line Objekte über Linie spiegeln - + Flipping objects by axis Objekte über Achse spiegeln - + Move objects Objekte verschieben @@ -11986,7 +12011,7 @@ Sollen die Änderungen gespeichert werden? Maße wurden aktualisiert - + Elliptical Arc Elliptischer Bogen @@ -12006,89 +12031,89 @@ Sollen die Änderungen gespeichert werden? Datei konnte nicht gespeichert werden - + read only schreibgeschützt - + Variables Table Variablentabelle - + Contains information about increments and internal variables Enthält Informationen zu Inkrementen und internen Variablen - + Load Individual Lade eigene Maße - + Load Individual measurements file Lade eigene Maßdatei - - + + Load Multisize Lade MultiMaße - + Load multisize measurements file Lade MultiMaß Maße-Datei - + Open Tape Maßband öffnen - + Edit Current Aktuelles bearbeiten - + Edit linked to the pattern measurements Änderung der mit dem Schnitt verbundenen Maße - + Sync Synchronisieren - + Synchronize linked to the pattern measurements after change Synchronisierung der mit dem Schnitt verbundenen Maße nach Änderung - + Unload Current Entladen der aktuellen Maße - + Unload measurements if they were not used in a pattern file Entladen der Maße, die nicht in der Schnitt Datei verwendet wurden - - + + Individual measurements Individuelle Maße - - + + Multisize measurements MultiMaß Maße @@ -12099,7 +12124,7 @@ Sollen die Änderungen gespeichert werden? Schnittmusterdateien - + Pin tool Pin Werkzeug @@ -12109,17 +12134,17 @@ Sollen die Änderungen gespeichert werden? Pin Punkt wählen - + Insert node tool Knoten einfügen Werkzeug - + Open Tape app for creating or editing measurements file Öffnen der Tape App um ein Maß-Datei anzulegen oder zu ändern - + Export increments to CSV Exportieren der Zunahmen in CSV @@ -12159,143 +12184,143 @@ Sollen die Änderungen gespeichert werden? Sie können den Layoutmodus noch nicht nutzen. - + Zoom fit best current In aktuelle Ansicht einpassen - + zoom fit best current pattern piece Zoom Best-Fit aktuelles Schnittteil - + Export details skiping the Layout stage Details exportieren und Layoutphase überspringen - + You don't have enough details to export. Please, include at least one detail in layout. Sie haben nicht genug Details zu exportieren. Bitte benutzen Sie mindestens ein Detail im Layout. - + Export details Details exportieren - + Can't export details. Kann Details nicht exportieren. - + Label template editor Beschriftungsvorlageneditor - + Workpiece tool Werkstück-Werkzeug - + Internal path tool Innerer Pfad-Werkzeug - + Save &As… Speichern unter… - + Report Bug… Programmfehler melden… - + Export As… Exportieren als… - + Save… Speichern… - + Final measurements Endgültige Maße - + Export Final Measurements to CSV Endgültige Maße nach CSV exportieren - + You can't export empty scene. Please, include at least one detail in layout. Leere Szene kann nicht exportiert werden. Bitte mindestens ein Detail in den Zuschnittplan aufnehmen. - + Export final measurements error. Fehler beim Exportieren der endgültigen Maße. - + Destination path is empty. Zielpfad ist leer. - + Next pattern piece Nächstes Schnittteil - + Ctrl+PgDown Strg+BildAb - + Previous pattern piece Vorheriges Schnittteil - + Ctrl+PgUp Strg+BildAuf - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool Beschriftung platzieren-Werkzeug - + Duplicate detail tool Detail duplizieren-Werkzeug @@ -12305,7 +12330,7 @@ Sollen die Änderungen gespeichert werden? Wähle den Mittelpunkt der Beschriftung aus - + The measurements file '%1' could not be found or provides not enough information. Die Maß-Datei '%1' konnte nicht gefunden werden oder enthält ungenügende Informationen. @@ -12325,17 +12350,17 @@ Sollen die Änderungen gespeichert werden? Änderungen angewendet. - + Cannot save settings. Access denied. Kann Einstellungen nicht speichern. Zugriff verwehrt. - + Ctrl+O Strg+O - + Cannot read settings from a malformed .INI file. Kann Einstellungen nicht aus fehlerhafter .INI Datei lesen. @@ -12359,27 +12384,27 @@ Sollen die Änderungen gespeichert werden? Wähle ein oder mehr Objekte, halte <b>%1</b> - für Mehrfachauswahl, <b>%2</b> - Auswahl bestätigen - + Point of intersection circle and segment Punkt am Schnittpunkt von Kreis und Abschnitt - + Increase label font Beschriftung vergrößern - + Decrease label font Beschriftung verkleinern - + Original label font Original Beschriftung - + Hide labels Beschriftung verstecken @@ -12390,119 +12415,119 @@ Sollen die Änderungen gespeichert werden? Gruppen Sichtbarkeit - - + + Export recipe Exportieren der Anleitung - + Recipe files Anleitungs-Dateien - + recipe Anleitung - + Could not save recipe. %1 Konnte Anleitung nicht speichern. %1 - + Curved path tool which uses point as control handle Werkzeug Gekrümmter Pfad verwendet einstellbare Angriffspunkte - + Point of intersection arc and axis Punkt am Schnittpunkt von Bogen und Achse - + Show main path Zeige Hauptpfad - + Globally show pieces main path Globale Anzeige des Hauptpfads der Schnittteile - - + + Pattern messages Schnitt Nachrichten - + Clear all messages Lösche alle Nachrichten - + Filter Filter - + DEBUG DEBUG - + WARNING WARNUNG - + CRITICAL KRITISCH - + FATAL FATAL - + INFO INFO - + Auto refresh the list with each parse Automatische Aktualisierung der Liste mit jedem Leseversuch - + Watermark Wasserzeichen - + Load Laden - + Remove Entfernen - + Edit current Aktuelles Anpassen - + Editor Editor - + Create or edit a watermark Anlegen oder Ändern eines Wasserzeichens @@ -12512,37 +12537,37 @@ Sollen die Änderungen gespeichert werden? Wasserzeichen Dateien - + Manual Layout Manuelles Layout - + Open Puzzle Puzzle öffnen - + Open the Puzzle app Puzzle-App öffnen - + Create Erstellen - + Create manual layout Manuelles Layout erstellen - + Update Updaten - + Update manual layout Manuelles Layout aktualisieren @@ -12568,87 +12593,87 @@ Sollen die Änderungen gespeichert werden? Ordner auswählen - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. Nicht unterstützte Dimension Ein Wert '%1' für diese Musterdatei. - + Couldn't set dimension A. Need a file with multisize measurements. Das Maß A konnte nicht eingestellt werden. Ich brauche eine Datei mit mehreren Maßen. - + Couldn't set dimension A. File wasn't opened. Dimension A konnte nicht eingestellt werden. Die Datei wurde nicht geöffnet. - + Not supported dimension B value '%1' for this pattern file. Nicht unterstützter Dimension-B-Wert '%1' für diese Musterdatei. - + Couldn't set dimension B. Need a file with multisize measurements. Maß B konnte nicht eingestellt werden. Benötigt wird eine Datei mit Multisize-Maßen. - + Couldn't set dimension B. File wasn't opened. Dimension B konnte nicht eingestellt werden. Die Datei wurde nicht geöffnet. - + Not supported dimension C value '%1' for this pattern file. Nicht unterstützter Dimensions-C-Wert '%1' für diese Musterdatei. - + Couldn't set dimension C. Need a file with multisize measurements. Maß C konnte nicht eingestellt werden. Benötigt wird eine Datei mit Multisize-Maßen. - + Couldn't set dimension C. File wasn't opened. Dimension C konnte nicht eingestellt werden. Die Datei wurde nicht geöffnet. - + Could not create recipe file. %1 Die Anleitung konnte nicht erstellt werden. %1 - + Shop Shop - + Scalable Vector Graphics files Skalierbare Vektorgrafik-Dateien - + Save draw Zeichnung speichern - + Draw export Zeichnung exportieren - + Background images Hintergrundbild - + Add background image Hintergrundbild hinzufügen @@ -12733,38 +12758,38 @@ Sollen die Änderungen gespeichert werden? Hintergrundbild auswählen - - + + Unable to save image. Error: %1 Bild kann nicht gespeichert werden. Fehler: %1 - + Unable to save image. No data. Bild kann nicht gespeichert werden. Keine Daten. - + untitled unbenannt - + All files Alle Dateien - + Save Image Bild speichern - + Visibility group Sichtbarkeitsgruppe - + Show accuracy radius Genauigkeitsradius anzeigen @@ -12808,7 +12833,7 @@ Sollen die Änderungen gespeichert werden? Prozess kann nicht fortgesetzt werden, da keine verfügbaren Drucker in Ihrem System vorhanden sind. - + unnamed unbenannt @@ -12821,7 +12846,7 @@ Sollen die Änderungen gespeichert werden? Das Layout wurde seit der letzten Änderung nicht aktualisiert. Möchten Sie fortfahren? - + Couldn't prepare data for creation layout Daten für die Erstellung des Layouts konnten nicht vorbereitet werden @@ -12862,90 +12887,90 @@ Sollen die Änderungen gespeichert werden? Kann Druckränder nicht setzen - - + + Can't create a path Kann keinen Pfad erstellen - + Preparing details for layout Vorbereitung der Details für den Zuschnittplan - + Pattern Schnittmuster - + Name Name - + Value Wert - - - + + + Export final measurements error. Fehler beim Exportieren der endgültigen Maße. - + Value in line %1 is infinite or NaN. Please, check your calculations. Wert in Zeile %1 ist unendlich oder keine Zahl. Bitte die Berechnung überprüfen. - + Parser error at line %1: %2. Fehler beim Lesen in Zeile %1: %2. - + File error %1. Datei Fehler %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Ein oder mehrere Schnittteile sind größer als das Papierformat, das Sie ausgewählt haben. Bitte wählen Sie ein größeres Papierformat. - + Description Beschreibung - + Measurement file has unknown format. Maßdatei hat ein unbekanntes Format. - + File error. Dateifehler. - + Measurement file doesn't include all required measurements. Maßdatei beinhaltet nicht alle erforderlichen Maße. - + Please, additionally provide: %1 Bitte zusätzlich angeben: %1 - + Timeout. Zeitüberschreitung. - + Process has been stoped because of exception. Vorgang wurde wegen eines Fehlers unterbrochen. @@ -12974,7 +12999,7 @@ Sollen die Änderungen gespeichert werden? MoveLabel - + move point label Punkt-Label bewegen @@ -14474,14 +14499,14 @@ Diese Option wird nach einem Neustart aktiv. Änderungen angewendet. - + Can't convert toUInt parameter Konnte nicht in Parameter vom Typ 'positive Ganzzahl' umwandeln - + Can't convert toBool parameter Konnte nicht in Parameter vom Typ 'Wahrheitswert' umwandeln @@ -14492,7 +14517,7 @@ Diese Option wird nach einem Neustart aktiv. Leerer Parameter erhalten - + Can't convert toDouble parameter @@ -14521,22 +14546,22 @@ Diese Option wird nach einem Neustart aktiv. Benutzer Material Nummer %1 wurde nicht in diesem Schnitt definiert. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Kann keinen Einschnitt an Punkt '%1' in Schnittteil '%2' berechnen. Nahtzugabe ist leer. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. Cannot calculate a notch for point '%1' in piece '%2'. Kann keine Position für einen Einschnitt finden. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. Cannot calculate a notch for point '%1' in piece '%2'. Es ist unmöglich eine Einschnitt Position festzulegen. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. Kann keinen Einschnitt an Punkt '%1' in Schnittteil '%2' berechnen. Einschnitt fehlgeschlagen. @@ -14546,7 +14571,7 @@ Diese Option wird nach einem Neustart aktiv. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. Cannot calculate a notch for point '%1' in piece '%2'. Kann keinen Schnittpunkt finden. @@ -14590,13 +14615,13 @@ Diese Option wird nach einem Neustart aktiv. Parserfehler: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. Schnittteil '%1' hat ungültige Zuschnittzugabe. Bitte die Nahtzugabe überprüfen, um zu prüfen wie sich die Nahtzugabe verhält. - - + + Piece '%1'. Seam allowance is not valid. Schnitteil '%1'. Nahtzugabe ist ungültig. @@ -14606,7 +14631,7 @@ Diese Option wird nach einem Neustart aktiv. Leerer Einschnitt an Punkt '%1' in Schnittteil '%2' gefunden. Länge ist geringer als die Minimalangabe erlaubt. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. Kann keinen Einschnitt für Punkt '%1' in Schnittteil '%2' berechnen mit vorgegebener Nahtzugabe. Der Benutzer muss die Länge manuell vorgeben. @@ -14638,8 +14663,8 @@ Diese Option wird nach einem Neustart aktiv. Kann die Passmarken Länge für Punkt '%1' nicht berechnen. Ursache: %2. - - + + Passmark '%1' is not part of piece '%2'. Passmarke '%1' ist nicht Teil von Schnittteil '%2'. @@ -14661,7 +14686,7 @@ Diese Option wird nach einem Neustart aktiv. Ungültige Formel '%1' für Werkzeug mit der ID '%2'. %3. - + Can't convert toInt parameter @@ -14673,47 +14698,47 @@ Diese Option wird nach einem Neustart aktiv. Der Name des Teils '%1' ist nicht eindeutig. - + Could not find the segment start. Der Beginn des Segments wurde nicht gefunden. - + Could not find the segment end. Das Ende des Segments wurde nicht gefunden. - + Segment is too short. Abschnitt ist zu kurz. - + Error calculating segment for curve '%1'. %2 Fehler bei der Berechnung des Abschnitts für die Kurve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 Fehler im Pfad '%1'. Die Berechnung des Abschnitts für Kurve '%2' ist fehlgeschlagen. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. Das eingebaute Passzeichen '%1' kann nicht für das Stück '%2' vorbereitet werden. Passzeichen ist leer. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. Das eingebaute Passzeichen '%1' kann nicht für das Stück '%2' vorbereitet werden. Die Passzeichen-Basiszeile ist leer. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. Passzeichen '%1' für Stück '%2' kann nicht vorbereitet werden. Die Passzeichen-Basiszeile ist leer. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. Passzeichen '%1' für Stück '%2' kann nicht vorbereitet werden. Passzeichen ist leer. @@ -14741,39 +14766,39 @@ Diese Option wird nach einem Neustart aktiv. - + No data for the height dimension. Keine Daten für das Höhenmaß. - + No data for the size dimension. Keine Daten für das Größenmaß. - + No data for the hip dimension. Keine Daten für das Hüftmaß. - + No data for the waist dimension. Keine Daten für den Taillenumfang. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. Schnitteil '%1'. Fadenlauf ist ungültig. @@ -14801,23 +14826,22 @@ Diese Option wird nach einem Neustart aktiv. - + Cannot set printer margins Kann Druckränder nicht setzen - Unable to cut curve '%1'. The curve is too short. - Kurve '%1' kann nicht geschnitten werden. Die Kurve ist zu kurz. + Kurve '%1' kann nicht geschnitten werden. Die Kurve ist zu kurz. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Kurve '%1'. Die Länge eines geschnittenen Segments ist zu klein. Optimieren Sie es auf den minimalen Wert. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Kurve '%1'. Die Länge eines geschnittenen Segments ist zu groß. Optimieren Sie es auf den maximalen Wert. @@ -14865,25 +14889,25 @@ Diese Option wird nach einem Neustart aktiv. Möchten Sie wirklich löschen? - + No data for the X dimension. Keine Daten für das X Maß. - + No data for the Y dimension. Keine Daten für das Y Maß. - + No data for the Z dimension. Keine Daten für das Z Maß. - + No data for the W dimension. Keine Daten für das W Maß. @@ -14899,13 +14923,13 @@ Diese Option wird nach einem Neustart aktiv. Z-Wert Stücke verschieben - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Kurve '%1'. Die Länge eines Schnittsegments (%2) ist zu klein. Optimieren Sie es auf den minimalen Wert. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Kurve '%1'. Die Länge eines Schnittsegments (%2) ist zu groß. Optimieren Sie es auf den maximalen Wert. @@ -15461,7 +15485,7 @@ Diese Option wird nach einem Neustart aktiv. - + 0 results 0 Ergebnisse @@ -15512,21 +15536,21 @@ Diese Option wird nach einem Neustart aktiv. - + Name measurement column Name - + Full name measurement column Vollständiger Name - + Group measurement column Gruppe @@ -15748,7 +15772,7 @@ Diese Option wird nach einem Neustart aktiv. - + Import from CSV Aus CSV importieren @@ -15758,244 +15782,244 @@ Diese Option wird nach einem Neustart aktiv. Als CSV exportieren - + Show in Finder Im Suchfenster anzeigen - + File '%1' doesn't exist! Datei '%1' existiert nicht! - + File error. Dateifehler. - + untitled %1 unbenannt %1 - - + + untitled unbenannt - + read only schreibgeschützt - - + + Known measurements - + All files Alle Dateien - + Could not save the file Datei konnte nicht gespeichert werden - + known measurements - + Save as Speichern unter - + Failed to lock. This file already opened in another window. Fehler beim Sperren. Diese Datei ist bereits in einem anderen Fenster geöffnet. - + Could not save file Konnte Datei nicht speichern - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Fehler beim Sperren. Diese Datei ist bereits in einem anderen Fenster geöffnet. Bei zweifachem Ausführen kann es zu Konflikten kommen. - + Comma-Separated Values Komma-Separierte Werte - + Measurement image - + Invalid image. Error: %1 Ungültiges Bild. Fehler: %1 - - + + Unable to save image. Error: %1 Bild kann nicht gespeichert werden. Fehler: %1 - + Save Image Bild speichern - + Unable to show image. Error: %1 Das Bild kann nicht angezeigt werden. Fehler: %1 - + About Qt Über QT - + Empty Leer - + File was not saved yet. Die Datei wurde noch nicht gespeichert. - + Unsaved changes Ungespeicherte Änderungen - + Measurements have been modified. Do you want to save your changes? - + Save… Speichern… - + Save Speichern - + Don't Save Nicht speichern - + Cannot read settings from a malformed .INI file. Kann Einstellungen nicht aus fehlerhafter .INI Datei lesen. - + Cannot save settings. Access denied. Kann Einstellungen nicht speichern. Zugriff verwehrt. - + Empty list Leer - + Unknown measurement - + &New Window &Neues Fenster - - + + Unnamed image %1 - + Open file Datei öffnen - + Length units - + Degrees Grad - + None Keine - + Measurement name is empty. Name der Messung ist leer. - + Imported file must not contain the same name twice. Importierte Datei darf die selbe Bezeichnung nicht zweimal enthalten. - + Measurement '%1' doesn't match regex pattern. Die Messung '%1' entspricht nicht dem Regex Muster. - + Measurement '%1' already used in the file. Maß '%1' wird bereits in der Datei verwendet. - + Formula measurement column Formel - + Description measurement column Beschreibung - + Error in row %1. The measurement name is empty. Fehler in Zeile %1. Name des Maßes. - + Error in row %1. %2 Fehler in Zeile %1. %2 - + Individual measurements require at least 2 columns. Individuelle Maße erfordern mindestens 2 Spalten. @@ -16403,7 +16427,7 @@ Do you want to save your changes? - + Pattern unit: Schnittteil-Einheit: @@ -16524,19 +16548,19 @@ Do you want to save your changes? Maß löschen - + unknown gender unbekannt - + male gender männlich - + female gender weiblich @@ -16844,38 +16868,38 @@ Do you want to save your changes? - - + + Name measurement column Name - - + + Full name measurement column Vollständiger Name - - + + Calculated value measurement column Berechneter Wert - + Formula measurement column Formel - + Base value measurement column Basiswert @@ -17079,40 +17103,40 @@ Do you want to save your changes? Keine - + Invalid link - + Known measurements %1 - - + + Description measurement column Beschreibung - - - + + + Shift measurement column - + Empty list Leer - - - + + + %1 shift %1 Verschiebung @@ -17129,22 +17153,22 @@ Do you want to save your changes? Verschiebungswert in Spalte %1 kann nicht in Doppelwert umgewandelt werden. - + Millimeters Millimeter - + Inches Inch - + Centimeters Zentimeter - + Degrees Grad @@ -17170,7 +17194,7 @@ Do you want to save your changes? - + 0 results 0 Ergebnisse @@ -18330,12 +18354,12 @@ Do you want to save your changes? - + None Keine - + Known measurements %1 @@ -18648,27 +18672,26 @@ Do you want to save your changes? Spline kann nicht unterteilt werden - Unable to cut curve '%1'. The curve is too short. - Kurve '%1' kann nicht geschnitten werden. Die Kurve ist zu kurz. + Kurve '%1' kann nicht geschnitten werden. Die Kurve ist zu kurz. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Kurve '%1'. Die Länge eines Schnittsegments (%2) ist zu klein. Optimieren Sie es auf den minimalen Wert. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Kurve '%1'. Die Länge eines geschnittenen Segments ist zu klein. Optimieren Sie es auf den minimalen Wert. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Kurve '%1'. Die Länge eines Schnittsegments (%2) ist zu groß. Optimieren Sie es auf den maximalen Wert. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Kurve '%1'. Die Länge eines geschnittenen Segments ist zu groß. Optimieren Sie es auf den maximalen Wert. @@ -19602,26 +19625,26 @@ Do you want to save your changes? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Kurve '%1'. Die Länge eines Schnittsegments (%2) ist zu klein. Optimieren Sie es auf den minimalen Wert. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Kurve '%1'. Die Länge eines geschnittenen Segments ist zu klein. Optimieren Sie es auf den minimalen Wert. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Kurve '%1'. Die Länge eines Schnittsegments (%2) ist zu groß. Optimieren Sie es auf den maximalen Wert. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Kurve '%1'. Die Länge eines geschnittenen Segments ist zu groß. Optimieren Sie es auf den maximalen Wert. @@ -19706,21 +19729,39 @@ Do you want to save your changes? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 Fehler bei der Vorbereitung der Daten für das Layout: Detail '%1' Quadrat <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 Fehler bei der Vorbereitung der Daten für das Layout: Layoutpapierblatt <= 0 - + Error of preparing data for layout: List of details is empty Fehler bei der Vorbereitung der Daten für das Layout: Liste der Details ist leer + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19732,12 +19773,12 @@ Do you want to save your changes? VCommandLine - + Path to custom measure file (export mode). Pfad zur individuellen Maßdatei (Exportmodus). - + The measure file Die Maßsatzdatei @@ -19746,7 +19787,7 @@ Do you want to save your changes? Anzahl entspricht Ausgabeformat (default = 0 , Export -Modus): - + Format number Format Nummer @@ -19755,18 +19796,18 @@ Do you want to save your changes? Anzahl entsprechend Seitenvorlage (Standard = 0, Exportmodus): - - + + Template number Vorlagennummer - + The page width Die Seitenbreite - + The measure unit Die Maßeinheit @@ -19779,7 +19820,7 @@ Do you want to save your changes? Winkel - + Auto crop unused length (export mode). Automatisches Zuschneiden der ungenutzten Länge (Exportmodus). @@ -19796,7 +19837,7 @@ Do you want to save your changes? Layout -Einheiten (eines Papiers mit Ausnahme von px, Export-Modus). - + The unit Die Einheit @@ -19813,7 +19854,7 @@ Do you want to save your changes? Spaltbreite x2, gemessen in Layout-Einheiten. (Export-Modus). - + The gap width Die Spaltenbreite @@ -19822,7 +19863,7 @@ Do you want to save your changes? Layout-Gruppen festlegen (Export -Modus): - + Grouping type Gruppentyp @@ -19831,7 +19872,7 @@ Do you want to save your changes? Seitenformat und explizite Größe/Einheiten der Seite können nicht zusammen verwendet werden. - + Page height, width, units must be used all 3 at once. Höhe, Breite und Einheiten der Seite müssen alle 3 auf einmal benutzt werden. @@ -19846,7 +19887,7 @@ Do you want to save your changes? - + Unsupported paper units. Nicht unterstützte Papiergröße. @@ -19856,8 +19897,8 @@ Do you want to save your changes? Nicht unterstützte Layout-Größe. - - + + Export options can be used with single input file only. Exportoptionen können nur mit einer Eingabedatei verwendet werden. @@ -19866,17 +19907,17 @@ Do you want to save your changes? Das Programm in einem Testmodus laufen lassen. In diesem Modus lädt das Programm eine einzelne Schnittmuster-Datei und schließt still, ohne das Hauptfenster zu zeigen. Der Schlüssel hat Vorrang vor dem Schlüssel '%1'. - + Test option can be used with single input file only. Testoption kann nur mit einer Eingabedatei verwendet werden. - + The base filename of exported layout files. Use it to enable console export mode. Der Basisdateiname der exportierten Layout-Dateien. Verwenden Sie diesen, um den Export-Konsolen-Modus zu aktivieren. - + The base filename of layout files Der Basisdateiname der Layoutdateien @@ -19885,7 +19926,7 @@ Do you want to save your changes? Der Pfad zum Zielordner - + The destination folder Der Zielordner @@ -19906,12 +19947,12 @@ Do you want to save your changes? Die Basishöhe - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Seitenbreite in der derzeitigen Einheit wie 12.0 (kann nicht mit "%1" benutzt werden, Exportmodus). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Seitenhöhe in der derzeitigen Einheit wie 12.0 (kann nicht mit "%1" benutzt werden, Exportmodus). @@ -19942,22 +19983,22 @@ Do you want to save your changes? Ignorieren der Seitenränder zum Druck (Export-Modus). Setzen Sie alle Seitenränder auf 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Linker Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Rechter Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Oberer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Unterer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung des Standarddruckers verwendet. Oder 0, falls kein Drucker gefunden werden kann. @@ -19966,32 +20007,32 @@ Do you want to save your changes? Die Verschiebungslänge muss zusammen mit Verschiebungseinheiten genutzt werden. - + Gap width must be used together with shift units. Die Spaltenbreite muss zusammen mit Verschiebungseinheiten genutzt werden. - + Left margin must be used together with page units. Der linke Rand muss zusammen mit Seiteneinheiten genutzt werden. - + Right margin must be used together with page units. Der rechte Rand muss zusammen mit Seiteneinheiten genutzt werden. - + Top margin must be used together with page units. Der obere Rand muss zusammen mit Seiteneinheiten genutzt werden. - + Bottom margin must be used together with page units. Der untere Rand muss zusammen mit Seiteneinheiten genutzt werden. - + The path to output destination folder. By default the directory at which the application was started. Der Pfad zum Zielordner. Standardmäßig das Verzeichnis, in dem das Programm gestartet wurde. @@ -20024,12 +20065,12 @@ Do you want to save your changes? Drehung in Grad (um einen vordefinierten Winkel, Exportmodus). Standardwert ist 180. 0 bedeutet keine Drehung. Gültige Werte: %1. Jeder Wert gibt an, wie oft Details gedreht werden sollen. Zum Beispiel bedeutet 180, dass das Detail zweimal um 180 Grad gedreht wird (360/180=2). - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Seiten verbinden, falls möglich (Exportmodus). Maximaler Wert wird durch QImage limitiert, das nur Bilder mit bis zu 32768 x 32768 Pixeln unterstützt. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Speichern der Blattlänge, falls gesetzt (Export-Modus). Diese Einstellung sagt dem Programm, möglichst viel der Breite eines Blattes zu benutzen. Die Qualität der Anordnung kann sich verschlechtern, wenn diese Einstellung benutzt wurde. @@ -20038,17 +20079,17 @@ Do you want to save your changes? Verschieben der gemessenen Layoutlängen in Layouteinheiten (Exportmodus). Die Option zeigt, wie viele Punkte entlang der Kante verwendet werden, um ein Layout zu erstellen. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. Die Layout-Spaltbreite x2, gemessen in Layout-Einheiten. (Export-Modus). Legt den Abstand zwischen Details und einem Detail und einem Blatt fest. - + Sets layout groupping cases (export mode): %1. Legt Layoutgruppierungsfälle fest (Export-Modus): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Das Programm in einem Testmodus laufen lassen. In diesem Modus lädt das Programm eine einzelne Schnittmuster-Datei und schließt still, ohne das Hauptfenster zu zeigen. Der Schlüssel hat Vorrang vor dem Schlüssel '%1'. @@ -20065,7 +20106,7 @@ Do you want to save your changes? Die Verschiebungs-/Ausgleichslänge muss zusammen mit Verschiebungseinheiten genutzt werden. - + Number corresponding to output format (default = 0, export mode): Zahl entspricht Ausgabeformat (default = 0 , Exportmodus): @@ -20075,316 +20116,321 @@ Do you want to save your changes? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Skalierung für hochauflösende Bildschirme ausschalten. Wählen Sie diese Option wenn Sie Probleme mit der Skalierung haben (standardmäßig ist die Skalierung eingeschaltet). Alternativ können Sie die Umgebungsvariable %1 nutzen. - + Export dxf in binary form. Export in DXF Binär Format. - + Show/hide grainline when export layout. - + Export text as paths. Text als Pfade exportieren. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Exportiere ausschließlich Details. Exportiere Details wie sie im Detailsmodus positioniert wurden. Alle mit dem Zuschnittsplan zusammenhängenden Möglichkeiten werden ignoriert. - + Export only details that match a piece name regex. Exportiere ausschließlich Details die einem Schnittteil RegEx entsprechen. - + The name regex Der RegEx für die Bezeichnung - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. Exportiere als CSV mit Kopfzeile. Im Standard deaktiviert. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Angabe zum Zeichensatz der verwendet wird um die Daten zu speichern. Die Liste der unterstützten Zeichensätze wird von Qt zur Verfügung gestellt. Der Standard Wert hängt vom System ab. Unter Windows, entspricht der Zeichensatz der Systemeinstellung. Auf Unix Systemen, kann der Zeichensatz auf die iConv Bibliothek zurückgreifen, falls kein vorhandener Zeichensatz für die Systemeinstellung gefunden wird. Gültige Werte für diese Installation: - + Codec name Zeichensatz - + Specify csv separator character. Default value is '%1'. Valid characters: Angabe des CSV Trennzeichens. Standard Wert ist '%1'. Gültige Zeichen: - + Separator character Trennzeichen - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Der Aufruf dieses Befehls ermöglicht den Export der endgültigen Maße. Gib das Verzeichnisangabe die CSV Datei mit den endgültigen Maßen an. Die Verzeichnisangabe muss das Verzeichnis und den Dateinamen enthalten. Es kann absolut oder relativ angegeben werden. Im Fall einer relativen Verzeichnisangabe wird der Zielpfad ausgehende vom aktuellen Arbeitsverzeichnis ermittelt. - + Path to csv file Pfad zur CSV-Datei - + Number corresponding to layout page template (default = 0, export mode): Nummer entsprechend der Layoutseitenvorlage (Standard = 0, Exportmodus): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Nummer entsprechend der gekachelten PDF-Seitenvorlage (Standard = 0, Exportmodus mit gekacheltem PDF-Format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Linker Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn kein Wert eingegeben wird, wird die Einstellung 1 cm verwendet. - - + + The left margin Der linke Rand - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Rechter Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn nicht gesetzt, wird der Standardwert 1 cm verwendet. - - + + The right margin Der rechte Rand - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Oberer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn nicht gesetzt, wird der Standardwert 1 cm verwendet. - - + + The top margin Der obere Rand - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Unterer Seitenrand in der derzeitigen Größe wie 3.0 (Exportmodus). Wenn nicht gesetzt, wird der Standardwert 1 cm verwendet. - - + + The bottom margin Der untere Rand - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Stellen Sie die Ausrichtung der gekachelten Seiten auf das Querformat (Exportmodus) ein. Standardwert, wenn nicht Hochformat eingestellt. - + Cannot use pageformat and page explicit size together. Seitenformat und explizite Seitengröße können nicht zusammen verwendet werden. - + Tiled left margin must be used together with page units. Der gekachelte linke Rand muss zusammen mit den Seiteneinheiten verwendet werden. - + Tiled right margin must be used together with page units. Der gekachelte rechte Rand muss zusammen mit Seiteneinheiten verwendet werden. - + Tiled top margin must be used together with page units. Der gekachelte obere Rand muss zusammen mit Seiteneinheiten verwendet werden. - + Tiled bottom margin must be used together with page units. Der gekachelte untere Rand muss zusammen mit Seiteneinheiten verwendet werden. - + Page measure units (export mode). Valid values: %1. Maßeinheiten der Seite (Exportmodus). Gültige Werte: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. Verwenden Sie diese Option, um das definierte Material zu überschreiben. Der Wert muss die Form <number>@ <user matrial name>haben. Die Zahl sollte im Bereich von 1 bis %1 liegen. Beispiel: 1@Stoff2. Der Schlüssel kann mehrfach verwendet werden. Hat keine Auswirkung im GUI-Modus. - + User material Benutzermaterial - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. Macht alle Parser-Warnungen zu Fehlern. Wirkt sich nur im Konsolenmodus aus. Verwende diese Option, um Valentina zu zwingen, sofort zu beenden, wenn ein Schnittmuster eine Parser-Warnung enthält. - + Invalid user material '%1'. Separator is missing. Ungültiges Material des Benutzers '%1'. Trennzeichen fehlt. - + Invalid user material '%1'. Wrong material number. Ungültiges Material des Benutzers '%1'. Falsche Materialnummer. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. Ausrichtung der Seitenvorlage auf Querformat umstellen (Exportmodus). Diese Option ist nur für eine der vordefinierten Seitenvorlagen wirksam. - + The page height Die Seitenhöhe - + Order detail to follow grainline direction (export mode). Sortierung folgt der Fadenlaufrichtung (Exportmodus). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. <Time> in Minuten, die der Algorithmus benötigt, um das beste Layout zu finden. Die Zeit muss im Bereich von 1 Minute bis 60 Minuten liegen. Standardwert 1 Minute. - + Time Uhrzeit - + Coefficient Koeffizient - + Time must be in range from 1 minute to 60 minutes. Die Zeit muss zwischen 1 Minute und 60 Minuten liegen. - + Follow manual priority over priority by square (export mode). Befolge der manuelle Priorität gegenüber der Priorität nach dem Quadrat (Exportmodus). - + Nest quantity copies of each piece (export mode). Verschachtelung der Kopien von jedem Teil (Exportmodus). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. Effizienz des Layouts festlegen <coefficient>. Der Layout-Effizienzkoeffizient ist das Verhältnis zwischen der von den Teilen belegten Fläche und dem Begrenzungsrechteck aller Teile. Wenn die Verschachtelung das erforderliche Niveau erreicht, wird der Prozess angehalten. Wenn der Wert 0 ist, wird keine Prüfung durchgeführt. Der Koeffizient muss im Bereich von 0 bis 100 liegen. Standardwert 0. - + Coefficient must be in range from 0 to 100. Der Koeffizient muss im Bereich von 0 bis 100 liegen. - + Auto crop unused width (export mode). Automatisches Zuschneiden unbenutzter Breite (Exportmodus). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). Stellen Sie den horizontalen Skalierungsfaktor von 0,01 bis 3,0 ein (Standard = 1,0, Exportmodus). - + Horizontal scale Horizontale Skalierung - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). Einstellung des vertikalen Skalierungsfaktors von 0,01 bis 3,0 (Standard = 1,0, Exportmodus). - + Vertical scale Vertikale Skalierung - + Prefer one sheet layout solution (export mode). Bevorzugen Sie eine Ein-Blatt-Layout-Lösung (Exportmodus). - + Invalid dimension A value. Ungültiger Wert für Dimension A. - + Invalid dimension B value. Ungültiger Wert für Dimension B. - + Invalid dimension C value. Ungültiger Wert für Dimension C. - + Set base for dimension A in the multisize measurements units (export mode). Legen Sie die Basis für das Maß A in den Maßeinheiten für mehrere Größen fest (Exportmodus). - + The dimension A base Die Dimension A Basis - + Set base for dimension B in the multisize measurements units (export mode). Legen Sie die Basis für das Maß B in den Maßeinheiten für mehrere Größen fest (Exportmodus). - + The dimension B base Die Dimension B Basis - + Set base for dimension C in the multisize measurements units (export mode). Legen Sie die Basis für das Maß C in den Maßeinheiten für mehrere Größen fest (Exportmodus). - + The dimension C base Die Dimension C Basis @@ -20409,47 +20455,47 @@ Do you want to save your changes? Unzulässige Lückenbreite. - + Invalid layout page left margin. Ungültiger linker Seitenrand. - + Invalid layout page right margin. Ungültiger rechter Seitenrand. - + Invalid layout page top margin. Ungültiger oberer Seitenrand. - + Invalid layout page bottom margin. Ungültiger unterer Seitenrand. - + Invalid tiled page left margin. Ungültiger linker Rand der gekachelten Seite. - + Invalid tiled page right margin. Ungültiger rechter Rand der gekachelten Seite. - + Invalid tiled page top margin. Ungültiger oberer Rand der gekachelten Seite. - + Invalid tiled page bottom margin. Ungültiger untrer Rand der gekachelten Seite. - + Layout units (as paper's one except px, export mode). Default units cm. Layout-Einheiten (für das Papier, ausgenommen px, Exportmodus). Standardeinheiten ist cm. @@ -20459,7 +20505,7 @@ Do you want to save your changes? Schnittmuster-Teile aus der Rohdaten-Datei laden. - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. Druckerränder ignorieren (Exportmodus). Verwenden Sie dies, wenn Sie den vollen Platz auf dem Papier benötigen. Bei einem späteren Druck müssen Sie die Ränder selbst einstellen. @@ -20788,7 +20834,7 @@ Do you want to save your changes? VLayoutConverter - + Could not change version. Konnte Versionsnummer nicht ändern. @@ -20801,73 +20847,73 @@ Do you want to save your changes? Die Datei '%1' kann nicht gespeichert werden. Fehler: %2. - + Cannot set printer page size Kann die Seitengröße für den Druck nicht einstellen - + Cannot set printer margins Kann Druckränder nicht setzen - + Can't open file '%1' Datei '%1' kann nicht geöffnet werden - + Export raw layout data failed. %1. Export von Layout-Rohdaten fehlgeschlagen. %1. - + Creating file '%1' failed! %2 Fehler beim Erstellen der Datei '%1'! %2 - + Can't create an AAMA dxf file. Kann keine AAMA-dxf-Datei erstellen. - + Can't create an ASTM dxf file. Kann keine ASTM-dxf-Datei erstellen. - - + + Can't create an HP-GL file. - + (flat) files (flache) Dateien - + files Dateien - + Image files Bilddateien - + tiled unterteilt - + Numerical control Numerische Steuerung - + Raw Layout Data Rohdaten Layout @@ -20880,12 +20926,12 @@ Do you want to save your changes? VLayoutPiece - + Piece %1 doesn't have shape. Stück %1 hat keine Form. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21189,8 +21235,8 @@ Do you want to save your changes? Nicht platzierte Teile - - + + Pieces of Teile von @@ -21293,12 +21339,12 @@ Do you want to save your changes? VPGraphicsPiece - + Move to Bewegen zu - + Remove from Sheet Move to @@ -21314,37 +21360,37 @@ Do you want to save your changes? VPLayoutFileReader - + Piece Teil - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' Leeres Attribut "%1" gefunden - + Error in line %1. Seam allowance is empty. Fehler in Zeile %1. Nahtzugabe ist leer. - + Error in line %1. Internal path shape is empty. Fehler in Zeile %1. Interne Pfadform ist leer. - + Unexpected tag %1 in line %2 Unerwarteter Tag %1 in Zeile %2 - + Piece %1 invalid. %2 Stück %1 ungültig. %2 @@ -21396,7 +21442,7 @@ Do you want to save your changes? - + Properties Eigenschaften @@ -21553,9 +21599,9 @@ Do you want to save your changes? - - - + + + Export Export @@ -21605,84 +21651,84 @@ Do you want to save your changes? Warnung Teile außerhalb der Grenzen - + zoom Vergrößerung - - + + Scale Skalieren - + &Open &Öffnen - + &Save &Speichern - + Save &As Speichern &als - + &Import Raw Layout Data &Rohdaten für das Layout importieren - + E&xit Valentina &beenden - + &New &Neu - + About &Qt Über &Qt - + About &Puzzle Über &amp;Puzzle - + Zoom in Vergrößern - + Zoom out Verkleinern - + Zoom 1:1 Vergrößerung 1:1 - + Zoom fit best In Ansicht einpassen - + Zoom sheet Blatt vergrößern - - + + Preferences Einstellungen @@ -21703,7 +21749,7 @@ Do you want to save your changes? Kann kein Layout erstellen. - + Could not extract data from file '%1'. %2 Es konnten keine Daten aus der Datei '%1' extrahiert werden. %2 @@ -21726,102 +21772,102 @@ Do you want to save your changes? Inch - + Scale: Maßstab: - + untitled %1.vlt unbenannt %1.vlt - + untitled.vlt unbenannt.vlt - + read only schreibgeschützt - + Cannot read settings from a malformed .INI file. Kann Einstellungen nicht aus fehlerhafter .INI Datei lesen. - + Cannot save settings. Access denied. Kann Einstellungen nicht speichern. Zugriff verwehrt. - - - + + + Failed to open file, is it writable? Die Datei konnte nicht geöffnet werden, ist sie beschreibbar? - + &New Window &Neues Fenster - + Layout has been modified. Do you want to save your changes? - - + + Layout files Layout-Dateien - - - + + + Open file Datei öffnen - + Could not save the file Datei konnte nicht gespeichert werden - + layout Layout - + Save as Speichern unter - + Failed to lock. This file already opened in another window. Fehler beim Sperren. Diese Datei ist bereits in einem anderen Fenster geöffnet. - + Could not save file Konnte Datei nicht speichern - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Fehler beim Sperren. Diese Datei ist bereits in einem anderen Fenster geöffnet. Bei zweifachem Ausführen kann es zu Konflikten kommen. - + Raw Layout files Rohe Layout-Dateien - + About Qt Über QT @@ -21858,13 +21904,13 @@ Do you want to save your changes? - + Horizontal: Horizontal: - + Vertical: Vertikal: @@ -21947,71 +21993,76 @@ Do you want to save your changes? Kachel-Schema drucken - + + Boundary together with notches + + + + Pieces gap: Abstand der Teile: - + Export Layout Layout exportieren - + Undo commands Kommando rückgängig - + Add Sheet Blatt hinzufügen - - + + Print Drucken - - + + Print preview Druckvorschau - - + + Print tiled Gekachelt drucken - - + + Print preview tiled Druckvorschau gekachelt - + Editor Editor - + Create or edit a watermark Anlegen oder Ändern eines Wasserzeichens - + Edit current Aktuelles Anpassen - + Load Laden - + Remove Entfernen @@ -22022,13 +22073,13 @@ Do you want to save your changes? - + &Undo &Rückgängig - + &Redo &Wiederholen @@ -22039,113 +22090,113 @@ Do you want to save your changes? Pixel - + Unsaved changes Ungespeicherte Änderungen - + Save… Speichern… - + Save Speichern - + Don't Save Nicht speichern - - + + Can't create a path Kann keinen Pfad erstellen - + Can't open file '%1' Datei '%1' kann nicht geöffnet werden - - + + Failed in flushing page to disk, disk full? Fehler beim Aktualisieren, Festplatte voll? - - + + The layout is invalid. Das Layout ist ungültig. - + The layout is invalid. Piece out of bound. Do you want to continue export? Das Layout ist ungültig. Das Teil ist nicht gebunden. Möchten Sie den Export fortsetzen? - + The layout is invalid. Pieces superposition. Do you want to continue export? Das Layout ist ungültig. Teile überlagern sich. Export fortsetzen? - + Sheet %1 Blatt %1 - + translate pieces Teile übersetzen - + rotate pieces Teil drehen - - + + For printing multipages document all sheet should have the same size. Zum Drucken eines mehrseitigen Dokuments müssen alle Blätter die gleiche Größe haben. - - - - - - - - + + + + + + + + Print error Druckfehler - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Prozess kann nicht fortgesetzt werden, da keine verfügbaren Drucker in Ihrem System vorhanden sind. - + Watermark files Wasserzeichen Dateien - - - - + + + + Unable to get sheet page settings Einstellungen der Eigenschaften des Blattes können nicht abgerufen werden @@ -22155,27 +22206,27 @@ Do you want to save your changes? Zeige Teile Nummer - + Z value Z-Wert - + Bottom Unten - + Down Runter - + Up Hoch - + Top Oben @@ -22185,12 +22236,12 @@ Do you want to save your changes? Wirkt sich nur beim Drucken in der Anwendung aus. Für den Export mit Kachelschema separate Einstellung verwenden - + sheet Blatt - + Piece %1 invalid. %2 Stück %1 ungültig. %2 @@ -22331,37 +22382,37 @@ Do you want to save your changes? Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Detail" - + Error creating or updating single point Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Punkt" - - + + Error creating or updating point of end line Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Punkt mit Abstand und Winkel" - - + + Error creating or updating point along line Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Punkt auf einer Linie" - - + + Error creating or updating point of shoulder Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Spezieller Punkt an der Schulter" - - + + Error creating or updating point of normal Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Punkt auf einer Senkrechten" - - + + Error creating or updating point of bisector Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Winkelhalbierende" @@ -22370,128 +22421,128 @@ Do you want to save your changes? Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Schnittpunkt zweier Linien" - - + + Error creating or updating point of contact Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Schnittpunkt Kreis und Gerade" - + Error creating or updating modeling point Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Punkt" - + Error creating or updating height Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Lotfußpunkt" - + Error creating or updating triangle Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Dreieck" - + Error creating or updating point of intersection Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Laufender Schnittpunkt" - - + + Error creating or updating cut spline point Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Kurvensegment" - - + + Error creating or updating cut spline path point Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Pfadsegment" - - + + Error creating or updating cut arc point Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Kreisbogen" - - + + Error creating or updating point of intersection line and axis Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Laufender Schnittpunkt auf Linie" - - + + Error creating or updating point of intersection curve and axis Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Laufender Schnittpunkt auf Kurve" - + Error creating or updating line Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Linie" - - + + Error creating or updating simple curve Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Kurve" - - + + Error creating or updating curve path Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Gekrümmter Pfad" - + Error creating or updating modeling simple curve Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Kurve Detail" - + Error creating or updating modeling curve path Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Pfad Detail" - - - - + + + + Error creating or updating simple arc Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Bogen" - + Error creating or updating modeling arc Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Bogen Detail" - + Error creating or updating union details Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Details vereinigen" - + Error creating or updating point of intersection arcs Fehler beim Erstellen oder Aktualisieren des Bogen-Schnittpunktes - + Error creating or updating point of intersection circles Fehler beim Erstellen oder Aktualisieren des Kreis-Schnittpunktes - + Error creating or updating point from circle and tangent Fehler beim Erstellen oder Aktualisieren eines Berührungpunktes - + Error creating or updating point from arc and tangent Fehler beim Erstellen oder Aktualisieren eines Punktes von Bogen und Tangente - + Error creating or updating true darts Fehler beim Erstellen oder Aktualisieren des Abnäherausgleichs @@ -22508,17 +22559,17 @@ Do you want to save your changes? Unbekannter Punkt Typ '%1'. - + Unknown spline type '%1'. Unbekannte Spline Type '%1'. - + Unknown arc type '%1'. Unbekannter Bogen Typ '%1'. - + Unknown tools type '%1'. Unbekannter Werkzeug Typ '%1'. @@ -22528,75 +22579,75 @@ Do you want to save your changes? Fehler: uneindeutige ID. - + Error creating or updating point of intersection curves Fehler beim Anlegen oder Aktualisieren des Eintrags vom Typ "Kurvenschnittpunkt" - + Error creating or updating simple interactive spline Fehler beim Anlegen oder Aktualisieren der einfachen interaktiven Spline - + Error creating or updating interactive spline path Fehler beim Anlegen oder Aktualisieren des interaktiven Splinepfades - + Error creating or updating cubic bezier curve Fehler beim Erstellen oder Aktualisieren der kubischen Bezierkurve - + Error creating or updating cubic bezier path curve Fehler beim Erstellen oder Aktualisieren des Pfades der kubischen Bezierkurve - - + + Error creating or updating operation of rotation Fehler bei der Erstellung oder Aktualisierung des Rotationsvorgangs - + Unknown operation type '%1'. Unbekannter Vorgangstyp '%1'. - + Error creating or updating operation of flipping by line Fehler bei der Erstellung oder Aktualisierung beim Spiegel über eine Linie - + Error creating or updating operation of flipping by axis Fehler bei der Erstellung oder Aktualisierung beim Spiegel über die Achse - - + + Error creating or updating operation of moving Fehler beim Erstellen oder Aktualisieren der Verschiebung - + Error creating or updating point of line intersection Fehler bei der Erstellung oder Aktualisierung des Linienschnittpunkts - - + + Error creating or updating simple elliptical arc Fehler bei der Erstellung oder Aktualisierung eines elliptischen Bogens - + Unknown elliptical arc type '%1'. Unbekannter elliptischer Bogentyp '%1'. - + Error creating or updating modeling elliptical arc Fehler beim Erstellen oder Aktualisieren des elliptischen Bogens @@ -22606,34 +22657,34 @@ Do you want to save your changes? Detail - + Unnamed path Unbenannter Pfad - - + + Error creating or updating a piece path Fehler beim Erstellen oder Aktualisieren eines Schnittteil-Pfad - + Error creating or updating pin point Fehler beim Erstellen oder Aktualisieren des Pin-Punktes - + Piece path doesn't contain nodes Der Teilepfad enthält keine Knoten - - + + Error creating or updating place label Fehler beim Erstellen oder Aktualisieren der Bezeichnung - + Can't find increment '%1' Inkrement „%1“ kann nicht gefunden werden @@ -24412,108 +24463,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance aktuelle Nahtzugabe - + move pattern piece label verschiebe Schnittmuster Beschriftung - + resize pattern piece label Größe der Beschriftung ändern - + rotate pattern piece label Schnittteil-Beschriftung drehen - + move pattern info label Informations-Beschriftung des Schnittteils drehen - + resize pattern info label Größe der Informations-Beschriftung des Schnittteils ändern - + rotate pattern info label Schnittteil-Beschriftung drehen - + move grainline verschiebe Fadenlauf - + resize grainline Fadenlauf-Größe verändern - + rotate grainline Fadenlauf drehen - + Options Optionen - + In layout Im Layout - + Hide main path Verstecke Hauptpfad - + Reset piece label template - + Delete Entfernen - + apply save detail options Speichern von Detailoptionen anwenden - + multi deletion mehrfaches Löschen - + Forbid flipping Umdrehen verhindern - + Force flipping Spiegeln erzwingen - + This id (%1) is not unique. Diese ID (%1) ist nicht eindeutig. - + Tool was used after deleting. Werkzeug wurde nach dem Löschen verwendet. diff --git a/share/translations/valentina_el_GR.ts b/share/translations/valentina_el_GR.ts index 1ade2a4bc..abd7ff008 100644 --- a/share/translations/valentina_el_GR.ts +++ b/share/translations/valentina_el_GR.ts @@ -4711,40 +4711,40 @@ Κριτήριο επιλογής του επόμενου κομματιού - + Three groups: big, middle, small Τρείς ομάδες: μεγάλα, μεσαία, μικρά - + Two groups: big, small Δύο ομάδες: μεγάλα, μικρά - + Descending area Σμίκρυνση περιοχής - - + + Millimiters Χιλιοστά - - + + Centimeters Εκατοστά - - + + Inches Ίντσες - + Pixels Pixels @@ -4754,22 +4754,22 @@ Δημιουργία σχεδίου - + Auto crop unused length Αυτόματη περικοπή αχρησιμοποίητου μήκους - + Unite pages (if possible) Ενοποίηση σελίδων (αν είναι δυνατό) - + Gap width: Φάρδος περιθωρίου: - + Save length of the sheet Αποθήκευση μήκους του φύλλου @@ -4839,7 +4839,7 @@ Προσαρμογή - + Wrong fields. Λανθασμένα πεδία. @@ -4852,7 +4852,7 @@ Apply settings anyway? Εφαρμογή των ρυθμίσεων ούτως ή άλλως; - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4860,7 +4860,7 @@ Apply settings anyway? - + Layout options Επιλογές τοποθέτησης @@ -4869,7 +4869,7 @@ Apply settings anyway? Μετατόπιση μήκους: - + Rule for choosing the next workpiece Κανόνας για την επιλογή του επόμενου κομματιού εργασίας @@ -4878,17 +4878,17 @@ Apply settings anyway? Η ενεργοποίηση των φύλλων μεγάλου ύψους θα επιταχύνει τη δημιουργία. - + Divide into strips Διαίρεση σε λωρίδες - + Multiplier Πολλαπλασιαστής - + Set multiplier for length of the biggest workpiece in layout. @@ -4897,7 +4897,7 @@ Apply settings anyway? x - + Enabling for sheets that have big height will speed up creating. Η ενεργοποίηση φύλλων μεγάλου μεγέθους θα επιταχύνει τη δημιουργία. @@ -4907,7 +4907,7 @@ Apply settings anyway? Εκτυπωτής: - + None Printer Κανένα @@ -4938,70 +4938,85 @@ Apply settings anyway? Αγνόηση περιθωρίων - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -8051,7 +8066,7 @@ Apply settings anyway? Αποθήκευση Τοποθέτησης - + File name: Όνομα αρχείου: @@ -8088,8 +8103,8 @@ Apply settings anyway? Επιλογή διαδρομής για φάκελο προορισμού - - + + File base name Όνομα αρχείου βάσης @@ -8123,37 +8138,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins Περιθώρια - + Right: Δεξιά: - + Left: Αριστερά: - + Top: Επάνω: - + Bottom: Κάτω: - + Paper format Μορφή χαρτιού @@ -8163,20 +8183,20 @@ Apply settings anyway? - - - - + + + + cm εκ - + Templates: Πρότυπα: - + Orientation: @@ -8186,17 +8206,17 @@ Apply settings anyway? Επιλογές - + Scale - + Horizontal: - + Vertical: @@ -10520,27 +10540,27 @@ Apply settings anyway? Σημείο - + Point along perpendicular Σημείο κατα μήκος της κάθετης γραμμής - + Perpendicular point along line Κάθετο σημείο κατα μήκος της γραμμής - + Point along bisector Σημείο κατα μήκος της διχοτόμου - + Point at distance and angle Σημείο με απόσταση και γωνία - + Point at distance along line Σημείο με απόσταση κατα μήκος της γραμμής @@ -10553,12 +10573,12 @@ Apply settings anyway? Γραμμή - + Line between points Γραμμή ανάμεσα σε σημεία - + Point at line intersection Σημείο στην τομή γραμμής @@ -10575,7 +10595,7 @@ Apply settings anyway? Εργαλεία για δημιουργία τόξων. - + Arc Τόξο @@ -10603,210 +10623,215 @@ Apply settings anyway? &Πατρόν - + Measurements Μετρήσεις - + Window Παράθυρο - + Toolbar files Αρχεία μπάρας εργαλείων - + ToolBar modes - + Toolbar pattern Πατρόν μπάρας εργαλείων - + Toolbar options Επιλογές μπάρας εργαλείων - + Toolbar tools Εργαλεία μπάρας εργαλείων - + Tool options Επιλογές εργαλείων - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Νέο - + &New &Νέο - + Create a new pattern Δημιουργία νέου πατρόν - + Open Άνοιγμα - + &Open &Άνοιγμα - + Open file with pattern Άνοιγμα αρχείου με πατρόν - - + + Save Αποθήκευση - + &Save &Αποθήκευση - + Save pattern Αποθήκευση πατρόν - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Αποθήκευση &ως... - + Save not yet saved pattern Το πατρόν δεν έχει αποθηκευθεί ακόμα - + Draw Σχεδίαση - + Details Λεπτομέρειες - + Pointer tools Εργαλεία δείκτη - + New pattern piece Νέο κομμάτι πατρόν - + Add new pattern piece Προσθήκη νέου κομματιού πατρόν - + Change the label of pattern piece Αλλαγή ετικέτας πατρόν @@ -10819,57 +10844,57 @@ Apply settings anyway? Πίνακες μεταβλητών - - + + History Ιστορικό - + About &Qt Σχετικά &Qt - + &About Valentina &Σχετικά με το Valentina - + E&xit Έ&ξοδος - + Exit the application Έξοδος απο την εφαρμογή - + Preferences Προτιμήσεις - + Pattern properties Ιδιότητες πατρόν - - + + Zoom in Μεγέθυνση - + zoom in μεγέθυνση - - - + + + Zoom out Σμίκρυνση @@ -10886,7 +10911,7 @@ Apply settings anyway? Αρχικό Zoom - + Zoom fit best Προσαρμογή zoom @@ -10903,7 +10928,7 @@ Apply settings anyway? Αναφορά Σφάλματος... - + Report bug Αναφορά σφάλματος @@ -10920,8 +10945,8 @@ Apply settings anyway? Εμφάνιση βοήθειας online - - + + Pattern piece %1 Κομμάτι πατρόν %1 @@ -11014,7 +11039,7 @@ Apply settings anyway? Επιλέξτε καμπύλη - + About Qt Σχετικά με το Qt @@ -11054,7 +11079,7 @@ Apply settings anyway? - + Open file Άνοιγμα αρχείου @@ -11071,7 +11096,7 @@ Apply settings anyway? - + Error empty parameter. Σφάλμα κενής παραμέτρου. @@ -11087,17 +11112,17 @@ Apply settings anyway? - + Bad id. Κακή ταυτότητα. - + File saved Αποθηκευμένο αρχείο - + untitled.val Ανώνυμο.val @@ -11109,23 +11134,23 @@ Do you want to save your changes? - + &Undo &Αναίρεση - + &Redo &Ακύρωση αναίρεσης - + Pattern piece: Κομμάτι πατρόν: - + Enter a new label for the pattern piece. Εισάγετε μια νέα ετικέτα για το κομμάτι πατρόν. @@ -11144,8 +11169,8 @@ Do you want to save your changes? - - + + File error. Σφάλμα στο αρχείο. @@ -11154,12 +11179,12 @@ Do you want to save your changes? Το αρχείο φορτώθηκε - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Το Valentina δεν τερματίστηκε σωστά. Θέλετε να ανοίξετε εκ νέου τα αρχεία (%1) που είχατε ανοιχτά; - + Reopen files. Άνοιγμα αρχείων εκ νέου. @@ -11172,12 +11197,12 @@ Do you want to save your changes? Ατομικές μετρήσεις (*.vit) - + Special point on shoulder Ειδικό σημειο στον ώμο - + Triangle tool Εργαλείο τριγώνου @@ -11186,42 +11211,42 @@ Do you want to save your changes? Σημείο στην τομή τόξου και γραμμής - + Point from X and Y of two other points Σημείο απο τα Χ και Υ δύο άλλων σημείων - + Point intersect line and axis Σημείο στην τομή γραμμής και άξονα - + Simple curve Απλή καμπύλη - + Curved path Καμπύλο μονοπάτι - + Segmenting a simple curve Διατομή απλής καμπύλης - + Segment a curved path Διαχωρίστε ένα καμπύλο μονοπάτι - + Point intersect curve and axis Σημείο τομής καμπύλης και άξονα - + Segment an arc Κόψιμο τόξου @@ -11234,7 +11259,7 @@ Do you want to save your changes? Εργαλείο περιθωρίου ραφής - + Union tool Εργαλείο ένωσης @@ -11243,12 +11268,12 @@ Do you want to save your changes? μπάρα εργαλείων - + Last Tool Τελευταίο Εργαλείο - + Activate last used tool again Επανενεργοποίηση τελευταίου εργαλείου @@ -11258,33 +11283,33 @@ Do you want to save your changes? Επιλέξτε σημείο για τιμή Χ (κάθετα) - + Mode Λειτουργία - + Pointer Δείκτης - + Config pattern piece Διαμόρφωση κομματιού πατρόν - + Layout Τοποθέτηση - + Show Curve Details Εμφάνιση λεπτομερειών καμπύλης - + Show/hide control points and curve direction Εμφάνιση/απόκρυψη σημείων ελέγχου και κατεύθυνσης καμπύλης @@ -11293,27 +11318,27 @@ Do you want to save your changes? Εργαλεία - + Point of intersection arcs Σημείο σε τομή τόξων - + Point of intersection circles Σημείο σε τομή κύκλων - + Point from circle and tangent Σημείο από κύκλο και εφαπτομένη - + Point from arc and tangent Σημείο από τόξο και εφαπτόμενη - + Arc with given length Τόξο με δεδομένο μήκος @@ -11322,7 +11347,7 @@ Do you want to save your changes? Ρυθμίσεις - + Layout pages Σελίδες διάταξης @@ -11343,27 +11368,27 @@ Do you want to save your changes? Διαχωρισμός και αποθήκευση της τοποθέτησης σε μικρότερες σελίδες - + Print Εκτύπωση - + Print tiled PDF Εκτύπωση τεμαχισμένου PDF - + Split and print a layout into smaller pages (for regular printers) Διαχωρισμός και εκτύπωση της διάταξης σε μικρότερες σελίδες (για κανονικούς εκτυπωτές) - + Print preview Προεπισκόπιση εκτύπωσης - + Print preview original layout Προεπισκόπιση εκτύπωσης της αρχικής τοποθέτησης @@ -11372,8 +11397,8 @@ Do you want to save your changes? Εξαγωγή ως... - - + + Export original layout Εξαγωγή αρχικής διάταξης @@ -11415,7 +11440,7 @@ Do you want to save your changes? - + Layout mode Λειτουργία τοποθέτησης @@ -11424,7 +11449,7 @@ Do you want to save your changes? Δε μπορείτε ακόμα να χρησιμοποιήσετε τη λειτουργία τοποθέτησης. Παρακαλώ, δημιουργήστε τουλάχιστον ένα κομμάτι εργασίας. - + Unsaved changes Αλλαγές χωρίς αποθήκευση @@ -11463,12 +11488,12 @@ Do you want to save your changes? Στάνταρ μετρήσεις (*.vst);;Ατομικές μετρήσεις (*.vit) - + You can't export empty scene. Δεν μπορείς να εξάγεις άδεια σκηνή. - + Create new Layout Δημιουργία νέας Διάταξης @@ -11500,7 +11525,7 @@ Do you want to save your changes? Το αρχείο μετρήσεων περιλαμβάνει μη έγκυρες γνωστές μετρήσεις. - + Measurement file has unknown format. Το αρχείο μετρήσεων είναι άγνωστης μορφής. @@ -11527,13 +11552,13 @@ Do you want to save your changes? Δεν ήταν δυνατός ο συγχρονισμός των μετρήσεων. - + Couldn't update measurements. Δεν ήταν δυνατή η ενημέρωση των μετρήσεων. - - + + The measurements file '%1' could not be found. Το αρχείο μετρήσεων '%1' δε βρέθηκε. @@ -11542,7 +11567,7 @@ Do you want to save your changes? Το αρχείο μετρήσεων <br/><br/> <b>%1</b> <br/><br/> δε βρέθηκε. Θέλετε να ενημερώσετε τη θέση του αρχείου - + Loading measurements file Φόρτωση αρχείου μετρήσεων @@ -11559,9 +11584,9 @@ Do you want to save your changes? Δεν ήταν δυνατός ο ορισμός μεγέθους. Το αρχείο δεν ανοίχτηκε. - - - + + + The method %1 does nothing in GUI mode @@ -11570,45 +11595,45 @@ Do you want to save your changes? Δεν ήταν δυνατός ο ορισμός ύψους. Το αρχείο δεν ανοίχτηκε. - - - - + + + + Export error. Σφάλμα εξαγωγής. - + Please, provide one input file. Παρακαλώ, δώστε ένα αρχείο εισόδου. - + Print an original layout Εκτύπωση μίας αρχικής διάταξης - + Preview tiled PDF Προεπισκόπιση τεμαχισμένου PDF - + Print preview tiled layout Προεπισκόπηση εκτύπωσης τεμαχισμένης διάταξης - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -11623,7 +11648,7 @@ Do you want to save your changes? - + True darts Εξομάλυνση πενσών @@ -11647,7 +11672,7 @@ Do you want to save your changes? Αποθήκευση... - + Don't Save Χωρίς αποθήκευση @@ -11668,7 +11693,7 @@ Do you want to save your changes? Αναφορά σφάλματος... - + Point intersection curves Σημείο τομής καμπυλών @@ -11686,7 +11711,7 @@ Do you want to save your changes? Έγινε αλλαγή των μετρήσεων. Θέλετε να συγχρονίσετε τις μετρήσεις τώρα; - + Curve tool which uses point as control handle @@ -11717,14 +11742,14 @@ Do you want to save your changes? Ομάδες - + Rotate objects Περιστροφή αντικειμένων - - - + + + Close pattern Κλείσιμο πατρόν @@ -11733,12 +11758,12 @@ Do you want to save your changes? Εργαλείο δείκτη - + Midpoint between two points Μεσαίο σημείο ανάμεσα απο δύο σημεία - + Group Ομάδα @@ -11755,8 +11780,8 @@ Do you want to save your changes? - - + + Original zoom Αρχικό zoom @@ -11786,22 +11811,22 @@ Do you want to save your changes? Μέγεθος: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line Αντιστροφή αντικειμένων με γραμμή - + Flipping objects by axis Αντιστροφή αντικειμένων με άξονα - + Move objects Μετακίνηση αντικειμένων @@ -11816,7 +11841,7 @@ Do you want to save your changes? Οι μετρήσεις συγχρονίστηκαν - + Elliptical Arc Ελλειπτικό Τόξο @@ -11836,89 +11861,89 @@ Do you want to save your changes? Δεν ήταν δυνατή η αποθήκευση του αρχείου - + read only μόνο για ανάγνωση - + Variables Table Πίνακας μεταβλητών - + Contains information about increments and internal variables - + Load Individual Φόρτωση Ατομικών - + Load Individual measurements file Φόρτωση φακέλου Ατομικών μετρήσεων - - + + Load Multisize - + Load multisize measurements file - + Open Tape Άνοιγμα Tape - + Edit Current Επεξεργασία Τρέχοντος - + Edit linked to the pattern measurements - + Sync Συγχρονισμός - + Synchronize linked to the pattern measurements after change - + Unload Current - + Unload measurements if they were not used in a pattern file - - + + Individual measurements Ατομικές μετρήσεις - - + + Multisize measurements @@ -11929,7 +11954,7 @@ Do you want to save your changes? Αρχεία πατρόν - + Pin tool Εργαλειο πινέζας @@ -11939,17 +11964,17 @@ Do you want to save your changes? - + Insert node tool Εισάγετε εργαλείο κόμβου - + Open Tape app for creating or editing measurements file Ανοίξτε την εφαρμογή Tape για δημιουργία ή διόρθωση του αρχείου μετρήσεων - + Export increments to CSV @@ -11989,143 +12014,143 @@ Do you want to save your changes? - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. Δεν μπορεί να γίνει εξαγωγή λεπτομερειών. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool - + Duplicate detail tool @@ -12135,7 +12160,7 @@ Do you want to save your changes? - + The measurements file '%1' could not be found or provides not enough information. @@ -12155,17 +12180,17 @@ Do you want to save your changes? Οι αλλαγές εφαρμόστηκαν. - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -12189,27 +12214,27 @@ Do you want to save your changes? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -12220,119 +12245,119 @@ Do you want to save your changes? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove Αφαίρεση - + Edit current - + Editor - + Create or edit a watermark @@ -12342,37 +12367,37 @@ Do you want to save your changes? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update Ενημέρωση - + Update manual layout @@ -12398,87 +12423,87 @@ Do you want to save your changes? Επιλογή φακέλου - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -12563,38 +12588,38 @@ Do you want to save your changes? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled ανώνυμο - + All files Όλα τα αρχεία - + Save Image - + Visibility group - + Show accuracy radius @@ -12638,7 +12663,7 @@ Do you want to save your changes? Η συνέχεια είναι αδύνατη διότι δεν υπάρχουν διαθέσιμοι εκτυπωτές στ σύστημα. - + unnamed χωρίς όνομα @@ -12647,7 +12672,7 @@ Do you want to save your changes? Η τοποθέτηση δέν ενημερώθηκε μετά απο την τελευταία αλλαγή πατρόν. Θέλετε να συνεχίσετε; - + Couldn't prepare data for creation layout Δεν ήταν δυνατή η προετοιμασία δεδομένων για δημιουργία σχεδίου @@ -12668,90 +12693,90 @@ Do you want to save your changes? Δεν είναι δυνατή η δημιουργία μονοπατιού - - + + Can't create a path Δεν είναι δυνατή η δημιουργία μονοπατιού - + Preparing details for layout - + Pattern Πατρόν - + Name Όνομα - + Value Τιμή - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description Περιγραφή - + Measurement file has unknown format. Το αρχείο μετρήσεων είναι άγνωστης μορφής. - + File error. Σφάλμα στο αρχείο. - + Measurement file doesn't include all required measurements. Το αρχείο μετρήσεων δεν περιλαμβάνει όλες τις απιτούμενες μετρήσεις. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -12780,7 +12805,7 @@ Do you want to save your changes? MoveLabel - + move point label μετακίνηση ετικέτας σημείου @@ -14222,14 +14247,14 @@ This option will take an affect after restart. Οι αλλαγές εφαρμόστηκαν. - + Can't convert toUInt parameter - + Can't convert toBool parameter @@ -14240,7 +14265,7 @@ This option will take an affect after restart. - + Can't convert toDouble parameter @@ -14269,22 +14294,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -14294,7 +14319,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -14338,13 +14363,13 @@ This option will take an affect after restart. - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -14354,7 +14379,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -14386,8 +14411,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -14409,7 +14434,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -14421,47 +14446,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -14489,39 +14514,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -14549,23 +14574,18 @@ This option will take an affect after restart. - + Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -14613,25 +14633,25 @@ This option will take an affect after restart. Θέλετε σίγουρα να κάνετε διαγραφή; - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -14647,13 +14667,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -15187,7 +15207,7 @@ This option will take an affect after restart. - + 0 results @@ -15238,21 +15258,21 @@ This option will take an affect after restart. - + Name measurement column Όνομα - + Full name measurement column Πλήρες όνομα - + Group measurement column Ομάδα @@ -15474,7 +15494,7 @@ This option will take an affect after restart. - + Import from CSV @@ -15484,244 +15504,244 @@ This option will take an affect after restart. Εξαγωγή σε CSV - + Show in Finder Εμφάνιση στην Εύρεση - + File '%1' doesn't exist! Το αρχείο '%1' δεν υπάρχει! - + File error. Σφάλμα στο αρχείο. - + untitled %1 ανώνυμο %1 - - + + untitled ανώνυμο - + read only μόνο για ανάγνωση - - + + Known measurements - + All files Όλα τα αρχεία - + Could not save the file Δεν ήταν δυνατή η αποθήκευση του αρχείου - + known measurements - + Save as Αποθήκευση ως - + Failed to lock. This file already opened in another window. Αποτυχία κλειδώματος. Το αρχείο έχει ήδη ανοιχτεί σε ένα άλλο παράθυρο. - + Could not save file Δεν είναι δυνατή η αποθήκευση αρχείου - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Αποτυχία κλειδώματος. Αυτό το αρχείο έχει ήδη ανοιχτεί σε ένα άλλο παράθυρο. Αναμένετε συγκρούσεις όταν τρέχετε 2 αντίγραφα του προγράμματος. - + Comma-Separated Values Τιμές χωρισμένες με κόμμα - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt Σχετικά με το Qt - + Empty Κενό - + File was not saved yet. Το αρχείο δεν αποθηκεύτηκε ακόμα. - + Unsaved changes Αλλαγές χωρίς αποθήκευση - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save Αποθήκευση - + Don't Save Χωρίς αποθήκευση - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list Κενό - + Unknown measurement - + &New Window &Νέο παράθυρο - - + + Unnamed image %1 - + Open file Άνοιγμα αρχείου - + Length units - + Degrees - + None Κανένα - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Φόρμουλα - + Description measurement column Περιγραφή - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -16122,7 +16142,7 @@ Do you want to save your changes? - + Pattern unit: @@ -16219,19 +16239,19 @@ Do you want to save your changes? Διαγραφή διάστασης - + unknown gender άγνωστο - + male gender αρσενικό - + female gender θηλυκό @@ -16527,38 +16547,38 @@ Do you want to save your changes? - - + + Name measurement column Όνομα - - + + Full name measurement column Πλήρες όνομα - - + + Calculated value measurement column Υπολογισμένη τιμή - + Formula measurement column Φόρμουλα - + Base value measurement column @@ -16762,40 +16782,40 @@ Do you want to save your changes? Κανένα - + Invalid link - + Known measurements %1 - - + + Description measurement column Περιγραφή - - - + + + Shift measurement column - + Empty list Κενό - - - + + + %1 shift @@ -16812,22 +16832,22 @@ Do you want to save your changes? - + Millimeters - + Inches Ίντσες - + Centimeters Εκατοστά - + Degrees @@ -16853,7 +16873,7 @@ Do you want to save your changes? - + 0 results @@ -18009,12 +18029,12 @@ Do you want to save your changes? - + None Κανένα - + Known measurements %1 @@ -18307,27 +18327,22 @@ Do you want to save your changes? - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19257,26 +19272,26 @@ Do you want to save your changes? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19361,21 +19376,39 @@ Do you want to save your changes? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19387,33 +19420,33 @@ Do you want to save your changes? VCommandLine - + Path to custom measure file (export mode). - + The measure file Το αρχείο μετρήσεων - + Format number - - + + Template number - + The page width Το φάρδος σελίδας - + The measure unit @@ -19422,27 +19455,27 @@ Do you want to save your changes? Γωνία - + Auto crop unused length (export mode). Αυτόματηπερικοπή του μήκους που δε χρησιμοποιείται (λειτουργία εξαγωγής). - + The unit - + The gap width - + Grouping type Τύπος ομαδοποίησης - + Page height, width, units must be used all 3 at once. @@ -19453,7 +19486,7 @@ Do you want to save your changes? - + Unsupported paper units. @@ -19463,23 +19496,23 @@ Do you want to save your changes? - - + + Export options can be used with single input file only. Οι επιλογές εξαγωγής μπορούν να χρησιμοποιηθούν μόνο με ένα αρχείο εισαγωγής. - + Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files @@ -19488,7 +19521,7 @@ Do you want to save your changes? Η διαδρομή για το φάκελο προορισμού. - + The destination folder Ο φάκελος προορισμού @@ -19501,12 +19534,12 @@ Do you want to save your changes? Η τιμή ύψους - + Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -19521,397 +19554,402 @@ Do you want to save your changes? Αρχείο πατρόν. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Gap width must be used together with shift units. - + Left margin must be used together with page units. - + Right margin must be used together with page units. - + Top margin must be used together with page units. - + Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Number corresponding to output format (default = 0, export mode): - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -19936,47 +19974,47 @@ Do you want to save your changes? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -19986,7 +20024,7 @@ Do you want to save your changes? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -20273,7 +20311,7 @@ Do you want to save your changes? VLayoutConverter - + Could not change version. Δεν είναι δυνατή η αλλαγή έκδοσης. @@ -20286,73 +20324,73 @@ Do you want to save your changes? - + Cannot set printer page size - + Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 Η δημιουργία αρχείου '%1' απέτυχε! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files (επίπεδα) αρχεία - + files αρχεία - + Image files Αρχεία εικόνων - + tiled - + Numerical control - + Raw Layout Data @@ -20365,12 +20403,12 @@ Do you want to save your changes? VLayoutPiece - + Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -20674,8 +20712,8 @@ Do you want to save your changes? - - + + Pieces of @@ -20778,12 +20816,12 @@ Do you want to save your changes? VPGraphicsPiece - + Move to - + Remove from Sheet @@ -20799,37 +20837,37 @@ Do you want to save your changes? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -20881,7 +20919,7 @@ Do you want to save your changes? - + Properties @@ -21038,9 +21076,9 @@ Do you want to save your changes? - - - + + + Export Εξαγωγή @@ -21090,84 +21128,84 @@ Do you want to save your changes? - + zoom - - + + Scale - + &Open &Άνοιγμα - + &Save &Αποθήκευση - + Save &As - + &Import Raw Layout Data - + E&xit Έ&ξοδος - + &New &Νέο - + About &Qt Σχετικά &Qt - + About &Puzzle - + Zoom in Μεγέθυνση - + Zoom out Σμίκρυνση - + Zoom 1:1 - + Zoom fit best Προσαρμογή zoom - + Zoom sheet - - + + Preferences Προτιμήσεις @@ -21188,7 +21226,7 @@ Do you want to save your changes? - + Could not extract data from file '%1'. %2 @@ -21211,102 +21249,102 @@ Do you want to save your changes? Ίντσες - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only μόνο για ανάγνωση - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window &Νέο παράθυρο - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Άνοιγμα αρχείου - + Could not save the file Δεν ήταν δυνατή η αποθήκευση του αρχείου - + layout - + Save as Αποθήκευση ως - + Failed to lock. This file already opened in another window. Αποτυχία κλειδώματος. Το αρχείο έχει ήδη ανοιχτεί σε ένα άλλο παράθυρο. - + Could not save file Δεν είναι δυνατή η αποθήκευση αρχείου - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Αποτυχία κλειδώματος. Αυτό το αρχείο έχει ήδη ανοιχτεί σε ένα άλλο παράθυρο. Αναμένετε συγκρούσεις όταν τρέχετε 2 αντίγραφα του προγράμματος. - + Raw Layout files - + About Qt Σχετικά με το Qt @@ -21343,13 +21381,13 @@ Do you want to save your changes? - + Horizontal: - + Vertical: @@ -21432,71 +21470,76 @@ Do you want to save your changes? - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print Εκτύπωση - - + + Print preview Προεπισκόπιση εκτύπωσης - - + + Print tiled Εκτύπωση σε κομμάτια - - + + Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove Αφαίρεση @@ -21507,13 +21550,13 @@ Do you want to save your changes? - + &Undo &Αναίρεση - + &Redo &Ακύρωση αναίρεσης @@ -21524,113 +21567,113 @@ Do you want to save your changes? Pixels - + Unsaved changes Αλλαγές χωρίς αποθήκευση - + Save… - + Save Αποθήκευση - + Don't Save Χωρίς αποθήκευση - - + + Can't create a path Δεν είναι δυνατή η δημιουργία μονοπατιού - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error Σφάλμα εκτύπωσης - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Η συνέχεια είναι αδύνατη διότι δεν υπάρχουν διαθέσιμοι εκτυπωτές στ σύστημα. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -21640,27 +21683,27 @@ Do you want to save your changes? - + Z value - + Bottom - + Down - + Up - + Top @@ -21670,12 +21713,12 @@ Do you want to save your changes? - + sheet - + Piece %1 invalid. %2 @@ -21816,37 +21859,37 @@ Do you want to save your changes? Σφάλμα κατα τη δημιουργία ή ενημέρωση λεπτομέρειας - + Error creating or updating single point Σφάλμα κατα τη δημιουργία ή ενημέρωση ενός σημείου - - + + Error creating or updating point of end line Σφάλμα κατα τη δημιουργία ή ενημέρωση σημείου στο τέλος γραμμής - - + + Error creating or updating point along line Σφάλμα κατα τη δημιουργία ή ενημέρωση σημείου κατα μήκος τηςγραμμής - - + + Error creating or updating point of shoulder Σφάλμα κατα τη δημιουργία ή ενημέρωση σημείου του σημείου ώμου - - + + Error creating or updating point of normal - - + + Error creating or updating point of bisector Σφάλμα κατα τη δημιουργία ή ενημέρωση σημείου του σημείου της διχοτόμου @@ -21855,128 +21898,128 @@ Do you want to save your changes? Σφάλμα κατα τη δημιουργία ή ενημέρωση του σημείου της τομής με γραμμή - - + + Error creating or updating point of contact Σφάλμα κατα τη δημιουργία ή ενημέρωση του σημείου επαφής - + Error creating or updating modeling point - + Error creating or updating height Σφάλμα κατα τη δημιουργία ή ενημέρωση σημείου του ύψους - + Error creating or updating triangle Σφάλμα κατα τη δημιουργία ή ενημέρωση σημείου τριγώνου - + Error creating or updating point of intersection Σφάλμα κατα τη δημιουργία ή ενημέρωση σημείου διχοτόμου - - + + Error creating or updating cut spline point - - + + Error creating or updating cut spline path point - - + + Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis - + Error creating or updating line Σφάλμα κατα τη δημιουργία ή ενημέρωση γραμμής - - + + Error creating or updating simple curve Σφάλμα κατα τη δημιουργία ή ενημέρωση απλής καμπύλης - - + + Error creating or updating curve path Σφάλμα κατα τη δημιουργία ή ενημέρωση μονοπατιού καμπύλης - + Error creating or updating modeling simple curve - + Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc Σφάλμα κατα τη δημιουργία ή ενημέρωση απλού τόξου - + Error creating or updating modeling arc - + Error creating or updating union details - + Error creating or updating point of intersection arcs Σφάλμα κατα τη δημιουργία ή ενημέρωση του σημείου τομής τόξων - + Error creating or updating point of intersection circles Σφάλμα κατα τη δημιουργία ή ενημέρωση του σημείου τομής κύκλων - + Error creating or updating point from circle and tangent Σφάλμα κατα τη δημιουργία ή ενημέρωση σημείου απο κύκλο και εφαπτομένη - + Error creating or updating point from arc and tangent Σφάλμα κατα τη δημιουργία ή ενημέρωση σημείου απο τόξο και εφαπτομένη - + Error creating or updating true darts @@ -21993,17 +22036,17 @@ Do you want to save your changes? - + Unknown spline type '%1'. - + Unknown arc type '%1'. - + Unknown tools type '%1'. @@ -22013,75 +22056,75 @@ Do you want to save your changes? Σφάλμα λόγω μη μοναδικής ταυτότητας. - + Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline - + Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve Σφάλμα στη δημιουργία ή ενημέρωση της κυβικής καμπύλης Bezier - + Error creating or updating cubic bezier path curve Σφάλμα στη δημιουργία ή ενημέρωση της - - + + Error creating or updating operation of rotation Σφάλμα στη δημιουργία ή ενημέρωση της λειτουργίας περιστροφής - + Unknown operation type '%1'. - + Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving - + Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc @@ -22091,34 +22134,34 @@ Do you want to save your changes? Λεπτομέρεια - + Unnamed path Ανώνυμο μονοπάτι - - + + Error creating or updating a piece path - + Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -23873,108 +23916,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance Τρέχων περιθώριο ραφής - + move pattern piece label μετακίνηση ετικέτας κομματιού πατρόν - + resize pattern piece label αλλαγή διαστάσεων ετικέτας κομματιού πατρόν - + rotate pattern piece label περιστροφή ετικέτας κομματιού πατρόν - + move pattern info label μετακίνηση ετικέτας πληροφοριών πατρόν - + resize pattern info label αλλαγή διαστάσεων ετικέτας πληροφοριών πατρόν - + rotate pattern info label περιστροφή ετικέτας πληροφοριών πατρόν - + move grainline μετακίνηση γραμμής ίσιου - + resize grainline αλλαγή διάστασης γραμμής ίσιου - + rotate grainline περιστροφή γραμμής ίσιου - + Options Επιλογές - + In layout - + Hide main path Απόκρυψη κύριου μονοπατιού - + Reset piece label template - + Delete Διαγραφή - + apply save detail options - + multi deletion - + Forbid flipping Αποτροπή αντιστροφής - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_en_CA.ts b/share/translations/valentina_en_CA.ts index 79be80ac1..39e4b4f5f 100644 --- a/share/translations/valentina_en_CA.ts +++ b/share/translations/valentina_en_CA.ts @@ -4767,40 +4767,40 @@ Principle of choosing the next workpiece - + Three groups: big, middle, small Three groups: big, middle, small - + Two groups: big, small Two groups: big, small - + Descending area Descending area - - + + Millimiters Millimiters - - + + Centimeters Centimeters - - + + Inches Inches - + Pixels Pixels @@ -4810,22 +4810,22 @@ Create a layout - + Auto crop unused length Auto crop unused length - + Unite pages (if possible) Unite pages (if possible) - + Gap width: Gap width: - + Save length of the sheet Save length of the sheet @@ -4907,7 +4907,7 @@ Custom - + Wrong fields. Wrong fields. @@ -4920,7 +4920,7 @@ Apply settings anyway? Apply settings anyway? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4931,7 +4931,7 @@ Apply settings anyway? Descending area = 2 - + Layout options Layout options @@ -4940,7 +4940,7 @@ Apply settings anyway? Shift/Offset length: - + Rule for choosing the next workpiece Rule for choosing the next workpiece @@ -4949,17 +4949,17 @@ Apply settings anyway? Enabling for sheets that have big height will speed up creating. - + Divide into strips Divide into strips - + Multiplier Multiplier - + Set multiplier for length of the biggest workpiece in layout. Set multiplier for length of the biggest workpiece in layout. @@ -4968,7 +4968,7 @@ Apply settings anyway? x - + Enabling for sheets that have big height will speed up creating. Enabling for sheets that have big height will speed up creating. @@ -4978,7 +4978,7 @@ Apply settings anyway? Printer: - + None Printer None @@ -5009,70 +5009,85 @@ Apply settings anyway? - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -8144,7 +8159,7 @@ Apply settings anyway? Save Layout - + File name: File name: @@ -8181,8 +8196,8 @@ Apply settings anyway? Select path to destination folder - - + + File base name File base name @@ -8216,37 +8231,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins - + Right: Right: - + Left: Left: - + Top: Top: - + Bottom: Bottom: - + Paper format Paper format @@ -8256,20 +8276,20 @@ Apply settings anyway? - - - - + + + + cm cm - + Templates: Templates: - + Orientation: @@ -8279,17 +8299,17 @@ Apply settings anyway? Options - + Scale - + Horizontal: - + Vertical: @@ -10645,27 +10665,27 @@ Apply settings anyway? Point - + Point along perpendicular Point along perpendicular - + Perpendicular point along line Perpendicular point along line - + Point along bisector Point along bisector - + Point at distance and angle Point at distance and angle - + Point at distance along line Point at distance along line @@ -10678,12 +10698,12 @@ Apply settings anyway? Line - + Line between points Line between points - + Point at line intersection Point at line intersection @@ -10700,7 +10720,7 @@ Apply settings anyway? Tools for creating arcs. - + Arc Arc @@ -10728,210 +10748,215 @@ Apply settings anyway? &Pattern piece - + Measurements Measurements - + Window Window - + Toolbar files Toolbar files - + ToolBar modes ToolBar modes - + Toolbar pattern Toolbar pattern - + Toolbar options Toolbar options - + Toolbar tools Toolbar tools - + Tool options Tool options - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New New - + &New &New - + Create a new pattern Create a new pattern - + Open Open - + &Open &Open - + Open file with pattern Open file with pattern - - + + Save Save - + &Save &Save - + Save pattern Save pattern - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Save &As... - + Save not yet saved pattern Save not yet saved pattern - + Draw Draw - + Details Details - + Pointer tools Pointer tools - + New pattern piece New pattern piece - + Add new pattern piece Add new pattern piece - + Change the label of pattern piece Change the label of pattern piece @@ -10944,57 +10969,57 @@ Apply settings anyway? Tables of variables - - + + History History - + About &Qt About &Qt - + &About Valentina &About Valentina - + E&xit E&xit - + Exit the application Exit the application - + Preferences Preferences - + Pattern properties Pattern properties - - + + Zoom in Zoom in - + zoom in zoom in - - - + + + Zoom out Zoom out @@ -11011,7 +11036,7 @@ Apply settings anyway? Original Zoom - + Zoom fit best Zoom fit best @@ -11028,7 +11053,7 @@ Apply settings anyway? Repot Bug... - + Report bug Report bug @@ -11045,8 +11070,8 @@ Apply settings anyway? Show online help - - + + Pattern piece %1 Pattern piece %1 @@ -11139,7 +11164,7 @@ Apply settings anyway? Select curve - + About Qt About Qt @@ -11179,7 +11204,7 @@ Apply settings anyway? - + Open file Open file @@ -11196,7 +11221,7 @@ Apply settings anyway? - + Error empty parameter. Error empty parameter. @@ -11212,17 +11237,17 @@ Apply settings anyway? Error parsing file (std::bad_alloc). - + Bad id. Bad id. - + File saved File saved - + untitled.val untitled.val @@ -11234,23 +11259,23 @@ Do you want to save your changes? - + &Undo &Undo - + &Redo &Redo - + Pattern piece: Pattern piece: - + Enter a new label for the pattern piece. Enter a new label for the pattern piece. @@ -11269,8 +11294,8 @@ Do you want to save your changes? - - + + File error. File error. @@ -11279,12 +11304,12 @@ Do you want to save your changes? File loaded - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? - + Reopen files. Reopen files. @@ -11297,12 +11322,12 @@ Do you want to save your changes? Individual measurements (*.vit) - + Special point on shoulder Special point on shoulder - + Triangle tool Triangle tool @@ -11311,42 +11336,42 @@ Do you want to save your changes? Point at intersection of arc and line - + Point from X and Y of two other points Point from X and Y of two other points - + Point intersect line and axis Point intersect line and axis - + Simple curve Simple curve - + Curved path Curved path - + Segmenting a simple curve Segmenting a simple curve - + Segment a curved path Segment a curved path - + Point intersect curve and axis Point intersect curve and axis - + Segment an arc Segment an arc @@ -11359,7 +11384,7 @@ Do you want to save your changes? Seam allowance tool - + Union tool Union tool @@ -11368,12 +11393,12 @@ Do you want to save your changes? toolBar - + Last Tool Last Tool - + Activate last used tool again Activate last used tool again @@ -11383,33 +11408,33 @@ Do you want to save your changes? Select point for X value (vertical) - + Mode Mode - + Pointer Pointer - + Config pattern piece Config pattern piece - + Layout Layout - + Show Curve Details Show Curve Details - + Show/hide control points and curve direction Show/hide control points and curve direction @@ -11418,27 +11443,27 @@ Do you want to save your changes? Tools - + Point of intersection arcs Point of intersection arcs - + Point of intersection circles Point of intersection circles - + Point from circle and tangent Point from circle and tangent - + Point from arc and tangent Point from arc and tangent - + Arc with given length Arc with given length @@ -11447,7 +11472,7 @@ Do you want to save your changes? Settings - + Layout pages Layout pages @@ -11468,27 +11493,27 @@ Do you want to save your changes? Split and save a layout into smaller pages - + Print Print - + Print tiled PDF Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) Split and print a layout into smaller pages (for regular printers) - + Print preview Print preview - + Print preview original layout Print preview original layout @@ -11497,8 +11522,8 @@ Do you want to save your changes? Export As... - - + + Export original layout Export original layout @@ -11540,7 +11565,7 @@ Do you want to save your changes? - + Layout mode Layout mode @@ -11549,7 +11574,7 @@ Do you want to save your changes? You can't use now the Layout mode. Please, create at least one workpiece. - + Unsaved changes Unsaved changes @@ -11588,12 +11613,12 @@ Do you want to save your changes? Standard measurements (*.vst);;Individual measurements (*.vit) - + You can't export empty scene. You can't export empty scene. - + Create new Layout Create new Layout @@ -11625,7 +11650,7 @@ Do you want to save your changes? Measurement file contains invalid known measurement(s). - + Measurement file has unknown format. Measurement file has unknown format. @@ -11652,13 +11677,13 @@ Do you want to save your changes? Couldn't sync measurements. - + Couldn't update measurements. Couldn't update measurements. - - + + The measurements file '%1' could not be found. The measurements file '%1' could not be found. @@ -11667,7 +11692,7 @@ Do you want to save your changes? The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location - + Loading measurements file Loading measurements file @@ -11684,9 +11709,9 @@ Do you want to save your changes? Couldn't set size. File wasn't opened. - - - + + + The method %1 does nothing in GUI mode The method %1 does nothing in GUI mode @@ -11703,45 +11728,45 @@ Do you want to save your changes? Couldn't set height. File wasn't opened. - - - - + + + + Export error. Export error. - + Please, provide one input file. Please, provide one input file. - + Print an original layout Print an original layout - + Preview tiled PDF Preview tiled PDF - + Print preview tiled layout Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -11764,7 +11789,7 @@ Do you want to save your changes? Couldn't unload measurements. Some of them are used in the pattern. - + True darts True darts @@ -11788,7 +11813,7 @@ Do you want to save your changes? Save... - + Don't Save Don't Save @@ -11821,7 +11846,7 @@ Do you want to save your changes? Report Bug... - + Point intersection curves Point intersection curves @@ -11839,7 +11864,7 @@ Do you want to save your changes? Measurements was changed. Do you want to sync measurements now? - + Curve tool which uses point as control handle Curve tool which uses point as control handle @@ -11874,14 +11899,14 @@ Do you want to save your changes? Select one or more objects, <b>Enter</b> - finish creation - + Rotate objects Rotate objects - - - + + + Close pattern Close pattern @@ -11894,12 +11919,12 @@ Do you want to save your changes? Tool pointer - + Midpoint between two points Midpoint between two points - + Group Group @@ -11920,8 +11945,8 @@ Do you want to save your changes? You can't use now the Layout mode. Please, include at least one detail in layout. - - + + Original zoom Original zoom @@ -11951,22 +11976,22 @@ Do you want to save your changes? Size: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line Flipping objects by line - + Flipping objects by axis Flipping objects by axis - + Move objects Move objects @@ -11985,7 +12010,7 @@ Do you want to save your changes? Measurements have been synced - + Elliptical Arc Elliptical Arc @@ -12005,89 +12030,89 @@ Do you want to save your changes? Could not save the file - + read only read only - + Variables Table Variables Table - + Contains information about increments and internal variables Contains information about increments and internal variables - + Load Individual Load Individual - + Load Individual measurements file Load Individual measurements file - - + + Load Multisize Load Multisize - + Load multisize measurements file Load multisize measurements file - + Open Tape Open Tape - + Edit Current Edit Current - + Edit linked to the pattern measurements Edit linked to the pattern measurements - + Sync Sync - + Synchronize linked to the pattern measurements after change Synchronize linked to the pattern measurements after change - + Unload Current Unload Current - + Unload measurements if they were not used in a pattern file Unload measurements if they were not used in a pattern file - - + + Individual measurements Individual measurements - - + + Multisize measurements Multisize measurements @@ -12098,7 +12123,7 @@ Do you want to save your changes? Pattern files - + Pin tool Pin tool @@ -12108,17 +12133,17 @@ Do you want to save your changes? Select pin point - + Insert node tool Insert node tool - + Open Tape app for creating or editing measurements file Open Tape app for creating or editing measurements file - + Export increments to CSV Export increments to CSV @@ -12158,143 +12183,143 @@ Do you want to save your changes? You can't use Layout mode yet. - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool - + Duplicate detail tool @@ -12304,7 +12329,7 @@ Do you want to save your changes? - + The measurements file '%1' could not be found or provides not enough information. @@ -12324,17 +12349,17 @@ Do you want to save your changes? Changes applied. - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -12358,27 +12383,27 @@ Do you want to save your changes? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -12389,119 +12414,119 @@ Do you want to save your changes? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove Remove - + Edit current - + Editor - + Create or edit a watermark @@ -12511,37 +12536,37 @@ Do you want to save your changes? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update Update - + Update manual layout @@ -12567,87 +12592,87 @@ Do you want to save your changes? Select folder - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -12732,38 +12757,38 @@ Do you want to save your changes? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled untitled - + All files All files - + Save Image - + Visibility group - + Show accuracy radius @@ -12807,7 +12832,7 @@ Do you want to save your changes? Cannot proceed because there are no available printers in your system. - + unnamed unnamed @@ -12820,7 +12845,7 @@ Do you want to save your changes? The layout was not updated since last pattern modification. Do you want to continue? - + Couldn't prepare data for creation layout Couldn't prepare data for creation layout @@ -12861,90 +12886,90 @@ Do you want to save your changes? Cannot set printer margins - - + + Can't create a path - + Preparing details for layout - + Pattern Pattern - + Name Name - + Value Value - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description Description - + Measurement file has unknown format. Measurement file has unknown format. - + File error. File error. - + Measurement file doesn't include all required measurements. Measurement file doesn't include all required measurements. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -12973,7 +12998,7 @@ Do you want to save your changes? MoveLabel - + move point label move point label @@ -14471,14 +14496,14 @@ This option will take an affect after restart. Changes applied. - + Can't convert toUInt parameter Can't convert toUInt parameter - + Can't convert toBool parameter Can't convert toBool parameter @@ -14489,7 +14514,7 @@ This option will take an affect after restart. Got empty parameter - + Can't convert toDouble parameter @@ -14518,22 +14543,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -14543,7 +14568,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -14587,13 +14612,13 @@ This option will take an affect after restart. Parser error: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -14603,7 +14628,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -14635,8 +14660,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -14658,7 +14683,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -14670,47 +14695,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -14738,39 +14763,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -14798,23 +14823,18 @@ This option will take an affect after restart. - + Cannot set printer margins Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -14862,25 +14882,25 @@ This option will take an affect after restart. Do you really want to delete? - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -14896,13 +14916,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -15458,7 +15478,7 @@ This option will take an affect after restart. - + 0 results @@ -15509,21 +15529,21 @@ This option will take an affect after restart. - + Name measurement column Name - + Full name measurement column Full name - + Group measurement column Group @@ -15745,7 +15765,7 @@ This option will take an affect after restart. - + Import from CSV @@ -15755,244 +15775,244 @@ This option will take an affect after restart. Export to CSV - + Show in Finder Show in Finder - + File '%1' doesn't exist! File '%1' doesn't exist! - + File error. File error. - + untitled %1 untitled %1 - - + + untitled untitled - + read only read only - - + + Known measurements - + All files All files - + Could not save the file Could not save the file - + known measurements - + Save as Save as - + Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. - + Could not save file Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt About Qt - + Empty Empty - + File was not saved yet. File was not saved yet. - + Unsaved changes Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save Save - + Don't Save Don't Save - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list Empty - + Unknown measurement - + &New Window &New Window - - + + Unnamed image %1 - + Open file Open file - + Length units - + Degrees - + None None - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Formula - + Description measurement column Description - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -16401,7 +16421,7 @@ Do you want to save your changes? - + Pattern unit: Pattern unit: @@ -16522,19 +16542,19 @@ Do you want to save your changes? Delete measurement - + unknown gender unknown - + male gender male - + female gender female @@ -16842,38 +16862,38 @@ Do you want to save your changes? - - + + Name measurement column Name - - + + Full name measurement column Full name - - + + Calculated value measurement column Calculated value - + Formula measurement column Formula - + Base value measurement column Base value @@ -17077,40 +17097,40 @@ Do you want to save your changes? None - + Invalid link - + Known measurements %1 - - + + Description measurement column Description - - - + + + Shift measurement column - + Empty list Empty - - - + + + %1 shift @@ -17127,22 +17147,22 @@ Do you want to save your changes? - + Millimeters - + Inches Inches - + Centimeters Centimeters - + Degrees @@ -17168,7 +17188,7 @@ Do you want to save your changes? - + 0 results @@ -18328,12 +18348,12 @@ Do you want to save your changes? - + None None - + Known measurements %1 @@ -18647,27 +18667,22 @@ Do you want to save your changes? Can't cut this spline - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19601,26 +19616,26 @@ Do you want to save your changes? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19705,21 +19720,39 @@ Do you want to save your changes? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19731,12 +19764,12 @@ Do you want to save your changes? VCommandLine - + Path to custom measure file (export mode). Path to custom measure file (export mode). - + The measure file The measure file @@ -19745,7 +19778,7 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - + Format number Format number @@ -19754,18 +19787,18 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - - + + Template number Template number - + The page width The page width - + The measure unit The measure unit @@ -19778,7 +19811,7 @@ Do you want to save your changes? Angle - + Auto crop unused length (export mode). Auto crop unused length (export mode). @@ -19795,7 +19828,7 @@ Do you want to save your changes? Layout units (as paper's one except px, export mode). - + The unit The unit @@ -19812,7 +19845,7 @@ Do you want to save your changes? Gap width x2, measured in layout units. (export mode). - + The gap width The gap width @@ -19821,7 +19854,7 @@ Do you want to save your changes? Sets layout groupping (export mode): - + Grouping type Grouping type @@ -19830,7 +19863,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - + Page height, width, units must be used all 3 at once. Page height, width, units must be used all 3 at once. @@ -19845,7 +19878,7 @@ Do you want to save your changes? - + Unsupported paper units. Unsupported paper units. @@ -19855,8 +19888,8 @@ Do you want to save your changes? Unsupported layout units. - - + + Export options can be used with single input file only. Export options can be used with single input file only. @@ -19865,17 +19898,17 @@ Do you want to save your changes? Run the program in a test mode. The program this mode load a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Test option can be used with single input file only. Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files The base filename of layout files @@ -19884,7 +19917,7 @@ Do you want to save your changes? The path to output destination folder. - + The destination folder The destination folder @@ -19905,12 +19938,12 @@ Do you want to save your changes? The height value - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -19941,22 +19974,22 @@ Do you want to save your changes? Ignore margins printing (export mode). Set all margins to 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. @@ -19965,32 +19998,32 @@ Do you want to save your changes? Shift length must be used together with shift units. - + Gap width must be used together with shift units. Gap width must be used together with shift units. - + Left margin must be used together with page units. Left margin must be used together with page units. - + Right margin must be used together with page units. Right margin must be used together with page units. - + Top margin must be used together with page units. Top margin must be used together with page units. - + Bottom margin must be used together with page units. Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. The path to output destination folder. By default the directory at which the application was started. @@ -20023,12 +20056,12 @@ Do you want to save your changes? Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. @@ -20037,17 +20070,17 @@ Do you want to save your changes? Shift layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. @@ -20064,7 +20097,7 @@ Do you want to save your changes? Shift/Offset length must be used together with shift units. - + Number corresponding to output format (default = 0, export mode): Number corresponding to output format (default = 0, export mode): @@ -20074,316 +20107,321 @@ Do you want to save your changes? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -20408,47 +20446,47 @@ Do you want to save your changes? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -20458,7 +20496,7 @@ Do you want to save your changes? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -20788,7 +20826,7 @@ Do you want to save your changes? VLayoutConverter - + Could not change version. Could not change version. @@ -20801,73 +20839,73 @@ Do you want to save your changes? - + Cannot set printer page size - + Cannot set printer margins Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 Creating file '%1' failed! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files files - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -20880,12 +20918,12 @@ Do you want to save your changes? VLayoutPiece - + Piece %1 doesn't have shape. Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21189,8 +21227,8 @@ Do you want to save your changes? - - + + Pieces of @@ -21293,12 +21331,12 @@ Do you want to save your changes? VPGraphicsPiece - + Move to - + Remove from Sheet @@ -21314,37 +21352,37 @@ Do you want to save your changes? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -21396,7 +21434,7 @@ Do you want to save your changes? - + Properties @@ -21553,9 +21591,9 @@ Do you want to save your changes? - - - + + + Export Export @@ -21605,84 +21643,84 @@ Do you want to save your changes? - + zoom - - + + Scale - + &Open &Open - + &Save &Save - + Save &As - + &Import Raw Layout Data - + E&xit E&xit - + &New &New - + About &Qt About &Qt - + About &Puzzle - + Zoom in Zoom in - + Zoom out Zoom out - + Zoom 1:1 - + Zoom fit best Zoom fit best - + Zoom sheet - - + + Preferences Preferences @@ -21703,7 +21741,7 @@ Do you want to save your changes? - + Could not extract data from file '%1'. %2 @@ -21726,102 +21764,102 @@ Do you want to save your changes? Inches - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only read only - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Open file - + Could not save the file Could not save the file - + layout - + Save as Save as - + Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. - + Could not save file Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt About Qt @@ -21858,13 +21896,13 @@ Do you want to save your changes? - + Horizontal: - + Vertical: @@ -21947,71 +21985,76 @@ Do you want to save your changes? - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print Print - - + + Print preview Print preview - - + + Print tiled Print tiled - - + + Print preview tiled Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove Remove @@ -22022,13 +22065,13 @@ Do you want to save your changes? - + &Undo &Undo - + &Redo &Redo @@ -22039,113 +22082,113 @@ Do you want to save your changes? Pixels - + Unsaved changes Unsaved changes - + Save… - + Save Save - + Don't Save Don't Save - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Cannot proceed because there are no available printers in your system. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -22155,27 +22198,27 @@ Do you want to save your changes? - + Z value - + Bottom - + Down - + Up - + Top @@ -22185,12 +22228,12 @@ Do you want to save your changes? - + sheet - + Piece %1 invalid. %2 @@ -22331,37 +22374,37 @@ Do you want to save your changes? Error creating or updating detail - + Error creating or updating single point Error creating or updating single point - - + + Error creating or updating point of end line Error creating or updating point of end line - - + + Error creating or updating point along line Error creating or updating point along line - - + + Error creating or updating point of shoulder Error creating or updating point of shoulder - - + + Error creating or updating point of normal Error creating or updating point of normal - - + + Error creating or updating point of bisector Error creating or updating point of bisector @@ -22370,128 +22413,128 @@ Do you want to save your changes? Error creating or updating point of lineintersection - - + + Error creating or updating point of contact Error creating or updating point of contact - + Error creating or updating modeling point Error creating or updating modeling point - + Error creating or updating height Error creating or updating height - + Error creating or updating triangle Error creating or updating triangle - + Error creating or updating point of intersection Error creating or updating point of intersection - - + + Error creating or updating cut spline point Error creating or updating cut spline point - - + + Error creating or updating cut spline path point Error creating or updating cut spline path point - - + + Error creating or updating cut arc point Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis Error creating or updating point of intersection curve and axis - + Error creating or updating line Error creating or updating line - - + + Error creating or updating simple curve Error creating or updating simple curve - - + + Error creating or updating curve path Error creating or updating curve path - + Error creating or updating modeling simple curve Error creating or updating modeling simple curve - + Error creating or updating modeling curve path Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc Error creating or updating simple arc - + Error creating or updating modeling arc Error creating or updating modeling arc - + Error creating or updating union details Error creating or updating union details - + Error creating or updating point of intersection arcs Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent Error creating or updating point from arc and tangent - + Error creating or updating true darts Error creating or updating true darts @@ -22508,17 +22551,17 @@ Do you want to save your changes? Unknown point type '%1'. - + Unknown spline type '%1'. Unknown spline type '%1'. - + Unknown arc type '%1'. Unknown arc type '%1'. - + Unknown tools type '%1'. Unknown tools type '%1'. @@ -22528,75 +22571,75 @@ Do you want to save your changes? Error not unique id. - + Error creating or updating point of intersection curves Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline Error creating or updating simple interactive spline - + Error creating or updating interactive spline path Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation Error creating or updating operation of rotation - + Unknown operation type '%1'. Unknown operation type '%1'. - + Error creating or updating operation of flipping by line Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving Error creating or updating operation of moving - + Error creating or updating point of line intersection Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc Error creating or updating modeling elliptical arc @@ -22606,34 +22649,34 @@ Do you want to save your changes? Detail - + Unnamed path Unnamed path - - + + Error creating or updating a piece path Error creating or updating a piece path - + Error creating or updating pin point Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -24408,108 +24451,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance Current seam allowance - + move pattern piece label move pattern piece label - + resize pattern piece label resize pattern piece label - + rotate pattern piece label rotate pattern piece label - + move pattern info label move pattern info label - + resize pattern info label resize pattern info label - + rotate pattern info label rotate pattern info label - + move grainline move grainline - + resize grainline resize grainline - + rotate grainline rotate grainline - + Options Options - + In layout In layout - + Hide main path Hide main path - + Reset piece label template - + Delete Delete - + apply save detail options - + multi deletion - + Forbid flipping Forbid flipping - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_en_IN.ts b/share/translations/valentina_en_IN.ts index a37c42916..becb0bca8 100644 --- a/share/translations/valentina_en_IN.ts +++ b/share/translations/valentina_en_IN.ts @@ -4767,40 +4767,40 @@ Principle of choosing the next workpiece - + Three groups: big, middle, small Three groups: big, middle, small - + Two groups: big, small Two groups: big, small - + Descending area Descending area - - + + Millimiters Millimiters - - + + Centimeters Centimeters - - + + Inches Inches - + Pixels Pixels @@ -4810,22 +4810,22 @@ Create a layout - + Auto crop unused length Auto crop unused length - + Unite pages (if possible) Unite pages (if possible) - + Gap width: Gap width: - + Save length of the sheet Save length of the sheet @@ -4907,7 +4907,7 @@ Custom - + Wrong fields. Wrong fields. @@ -4920,7 +4920,7 @@ Apply settings anyway? Apply settings anyway? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4931,7 +4931,7 @@ Apply settings anyway? Descending area = 2 - + Layout options Layout options @@ -4940,7 +4940,7 @@ Apply settings anyway? Shift/Offset length: - + Rule for choosing the next workpiece Rule for choosing the next workpiece @@ -4949,17 +4949,17 @@ Apply settings anyway? Enabling for sheets that have big height will speed up creating. - + Divide into strips Divide into strips - + Multiplier Multiplier - + Set multiplier for length of the biggest workpiece in layout. Set multiplier for length of the biggest workpiece in layout. @@ -4968,7 +4968,7 @@ Apply settings anyway? x - + Enabling for sheets that have big height will speed up creating. Enabling for sheets that have big height will speed up creating. @@ -4978,7 +4978,7 @@ Apply settings anyway? Printer: - + None Printer None @@ -5009,70 +5009,85 @@ Apply settings anyway? - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -8144,7 +8159,7 @@ Apply settings anyway? Save Layout - + File name: File name: @@ -8181,8 +8196,8 @@ Apply settings anyway? Select path to destination folder - - + + File base name File base name @@ -8216,37 +8231,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins - + Right: Right: - + Left: Left: - + Top: Top: - + Bottom: Bottom: - + Paper format Paper format @@ -8256,20 +8276,20 @@ Apply settings anyway? - - - - + + + + cm cm - + Templates: Templates: - + Orientation: @@ -8279,17 +8299,17 @@ Apply settings anyway? Options - + Scale - + Horizontal: - + Vertical: @@ -10645,27 +10665,27 @@ Apply settings anyway? Point - + Point along perpendicular Point along perpendicular - + Perpendicular point along line Perpendicular point along line - + Point along bisector Point along bisector - + Point at distance and angle Point at distance and angle - + Point at distance along line Point at distance along line @@ -10678,12 +10698,12 @@ Apply settings anyway? Line - + Line between points Line between points - + Point at line intersection Point at line intersection @@ -10700,7 +10720,7 @@ Apply settings anyway? Tools for creating arcs. - + Arc Arc @@ -10728,210 +10748,215 @@ Apply settings anyway? &Pattern piece - + Measurements Measurements - + Window Window - + Toolbar files Toolbar files - + ToolBar modes ToolBar modes - + Toolbar pattern Toolbar pattern - + Toolbar options Toolbar options - + Toolbar tools Toolbar tools - + Tool options Tool options - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New New - + &New &New - + Create a new pattern Create a new pattern - + Open Open - + &Open &Open - + Open file with pattern Open file with pattern - - + + Save Save - + &Save &Save - + Save pattern Save pattern - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Save &As... - + Save not yet saved pattern Save not yet saved pattern - + Draw Draw - + Details Details - + Pointer tools Pointer tools - + New pattern piece New pattern piece - + Add new pattern piece Add new pattern piece - + Change the label of pattern piece Change the label of pattern piece @@ -10944,57 +10969,57 @@ Apply settings anyway? Tables of variables - - + + History History - + About &Qt About &Qt - + &About Valentina &About Valentina - + E&xit E&xit - + Exit the application Exit the application - + Preferences Preferences - + Pattern properties Pattern properties - - + + Zoom in Zoom in - + zoom in zoom in - - - + + + Zoom out Zoom out @@ -11011,7 +11036,7 @@ Apply settings anyway? Original Zoom - + Zoom fit best Zoom fit best @@ -11028,7 +11053,7 @@ Apply settings anyway? Repot Bug... - + Report bug Report bug @@ -11045,8 +11070,8 @@ Apply settings anyway? Show online help - - + + Pattern piece %1 Pattern piece %1 @@ -11139,7 +11164,7 @@ Apply settings anyway? Select curve - + About Qt About Qt @@ -11179,7 +11204,7 @@ Apply settings anyway? - + Open file Open file @@ -11196,7 +11221,7 @@ Apply settings anyway? - + Error empty parameter. Error empty parameter. @@ -11212,17 +11237,17 @@ Apply settings anyway? Error parsing file (std::bad_alloc). - + Bad id. Bad id. - + File saved File saved - + untitled.val untitled.val @@ -11234,23 +11259,23 @@ Do you want to save your changes? - + &Undo &Undo - + &Redo &Redo - + Pattern piece: Pattern piece: - + Enter a new label for the pattern piece. Enter a new label for the pattern piece. @@ -11269,8 +11294,8 @@ Do you want to save your changes? - - + + File error. File error. @@ -11279,12 +11304,12 @@ Do you want to save your changes? File loaded - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? - + Reopen files. Reopen files. @@ -11297,12 +11322,12 @@ Do you want to save your changes? Individual measurements (*.vit) - + Special point on shoulder Special point on shoulder - + Triangle tool Triangle tool @@ -11311,42 +11336,42 @@ Do you want to save your changes? Point at intersection of arc and line - + Point from X and Y of two other points Point from X and Y of two other points - + Point intersect line and axis Point intersect line and axis - + Simple curve Simple curve - + Curved path Curved path - + Segmenting a simple curve Segmenting a simple curve - + Segment a curved path Segment a curved path - + Point intersect curve and axis Point intersect curve and axis - + Segment an arc Segment an arc @@ -11359,7 +11384,7 @@ Do you want to save your changes? Seam allowance tool - + Union tool Union tool @@ -11368,12 +11393,12 @@ Do you want to save your changes? toolBar - + Last Tool Last Tool - + Activate last used tool again Activate last used tool again @@ -11383,33 +11408,33 @@ Do you want to save your changes? Select point for X value (vertical) - + Mode Mode - + Pointer Pointer - + Config pattern piece Config pattern piece - + Layout Layout - + Show Curve Details Show Curve Details - + Show/hide control points and curve direction Show/hide control points and curve direction @@ -11418,27 +11443,27 @@ Do you want to save your changes? Tools - + Point of intersection arcs Point of intersection arcs - + Point of intersection circles Point of intersection circles - + Point from circle and tangent Point from circle and tangent - + Point from arc and tangent Point from arc and tangent - + Arc with given length Arc with given length @@ -11447,7 +11472,7 @@ Do you want to save your changes? Settings - + Layout pages Layout pages @@ -11468,27 +11493,27 @@ Do you want to save your changes? Split and save a layout into smaller pages - + Print Print - + Print tiled PDF Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) Split and print a layout into smaller pages (for regular printers) - + Print preview Print preview - + Print preview original layout Print preview original layout @@ -11497,8 +11522,8 @@ Do you want to save your changes? Export As... - - + + Export original layout Export original layout @@ -11540,7 +11565,7 @@ Do you want to save your changes? - + Layout mode Layout mode @@ -11549,7 +11574,7 @@ Do you want to save your changes? You can't use now the Layout mode. Please, create at least one workpiece. - + Unsaved changes Unsaved changes @@ -11588,12 +11613,12 @@ Do you want to save your changes? Standard measurements (*.vst);;Individual measurements (*.vit) - + You can't export empty scene. You can't export empty scene. - + Create new Layout Create new Layout @@ -11625,7 +11650,7 @@ Do you want to save your changes? Measurement file contains invalid known measurement(s). - + Measurement file has unknown format. Measurement file has unknown format. @@ -11652,13 +11677,13 @@ Do you want to save your changes? Couldn't sync measurements. - + Couldn't update measurements. Couldn't update measurements. - - + + The measurements file '%1' could not be found. The measurements file '%1' could not be found. @@ -11667,7 +11692,7 @@ Do you want to save your changes? The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location - + Loading measurements file Loading measurements file @@ -11684,9 +11709,9 @@ Do you want to save your changes? Couldn't set size. File wasn't opened. - - - + + + The method %1 does nothing in GUI mode The method %1 does nothing in GUI mode @@ -11703,45 +11728,45 @@ Do you want to save your changes? Couldn't set height. File wasn't opened. - - - - + + + + Export error. Export error. - + Please, provide one input file. Please, provide one input file. - + Print an original layout Print an original layout - + Preview tiled PDF Preview tiled PDF - + Print preview tiled layout Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -11764,7 +11789,7 @@ Do you want to save your changes? Couldn't unload measurements. Some of them are used in the pattern. - + True darts True darts @@ -11788,7 +11813,7 @@ Do you want to save your changes? Save... - + Don't Save Don't Save @@ -11821,7 +11846,7 @@ Do you want to save your changes? Report Bug... - + Point intersection curves Point intersection curves @@ -11839,7 +11864,7 @@ Do you want to save your changes? Measurements was changed. Do you want to sync measurements now? - + Curve tool which uses point as control handle Curve tool which uses point as control handle @@ -11874,14 +11899,14 @@ Do you want to save your changes? Select one or more objects, <b>Enter</b> - finish creation - + Rotate objects Rotate objects - - - + + + Close pattern Close pattern @@ -11894,12 +11919,12 @@ Do you want to save your changes? Tool pointer - + Midpoint between two points Midpoint between two points - + Group Group @@ -11920,8 +11945,8 @@ Do you want to save your changes? You can't use now the Layout mode. Please, include at least one detail in layout. - - + + Original zoom Original zoom @@ -11951,22 +11976,22 @@ Do you want to save your changes? Size: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line Flipping objects by line - + Flipping objects by axis Flipping objects by axis - + Move objects Move objects @@ -11985,7 +12010,7 @@ Do you want to save your changes? Measurements have been synced - + Elliptical Arc Elliptical Arc @@ -12005,89 +12030,89 @@ Do you want to save your changes? Could not save the file - + read only read only - + Variables Table Variables Table - + Contains information about increments and internal variables Contains information about increments and internal variables - + Load Individual Load Individual - + Load Individual measurements file Load Individual measurements file - - + + Load Multisize Load Multisize - + Load multisize measurements file Load multisize measurements file - + Open Tape Open Tape - + Edit Current Edit Current - + Edit linked to the pattern measurements Edit linked to the pattern measurements - + Sync Sync - + Synchronize linked to the pattern measurements after change Synchronize linked to the pattern measurements after change - + Unload Current Unload Current - + Unload measurements if they were not used in a pattern file Unload measurements if they were not used in a pattern file - - + + Individual measurements Individual measurements - - + + Multisize measurements Multisize measurements @@ -12098,7 +12123,7 @@ Do you want to save your changes? Pattern files - + Pin tool Pin tool @@ -12108,17 +12133,17 @@ Do you want to save your changes? Select pin point - + Insert node tool Insert node tool - + Open Tape app for creating or editing measurements file Open Tape app for creating or editing measurements file - + Export increments to CSV Export increments to CSV @@ -12158,143 +12183,143 @@ Do you want to save your changes? You can't use Layout mode yet. - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool - + Duplicate detail tool @@ -12304,7 +12329,7 @@ Do you want to save your changes? - + The measurements file '%1' could not be found or provides not enough information. @@ -12324,17 +12349,17 @@ Do you want to save your changes? Changes applied. - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -12358,27 +12383,27 @@ Do you want to save your changes? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -12389,119 +12414,119 @@ Do you want to save your changes? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove Remove - + Edit current - + Editor - + Create or edit a watermark @@ -12511,37 +12536,37 @@ Do you want to save your changes? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update Update - + Update manual layout @@ -12567,87 +12592,87 @@ Do you want to save your changes? Select folder - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -12732,38 +12757,38 @@ Do you want to save your changes? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled untitled - + All files All files - + Save Image - + Visibility group - + Show accuracy radius @@ -12807,7 +12832,7 @@ Do you want to save your changes? Cannot proceed because there are no available printers in your system. - + unnamed unnamed @@ -12820,7 +12845,7 @@ Do you want to save your changes? The layout was not updated since last pattern modification. Do you want to continue? - + Couldn't prepare data for creation layout Couldn't prepare data for creation layout @@ -12861,90 +12886,90 @@ Do you want to save your changes? Cannot set printer margins - - + + Can't create a path - + Preparing details for layout - + Pattern Pattern - + Name Name - + Value Value - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description Description - + Measurement file has unknown format. Measurement file has unknown format. - + File error. File error. - + Measurement file doesn't include all required measurements. Measurement file doesn't include all required measurements. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -12973,7 +12998,7 @@ Do you want to save your changes? MoveLabel - + move point label move point label @@ -14471,14 +14496,14 @@ This option will take an affect after restart. Changes applied. - + Can't convert toUInt parameter Can't convert toUInt parameter - + Can't convert toBool parameter Can't convert toBool parameter @@ -14489,7 +14514,7 @@ This option will take an affect after restart. Got empty parameter - + Can't convert toDouble parameter @@ -14518,22 +14543,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -14543,7 +14568,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -14587,13 +14612,13 @@ This option will take an affect after restart. Parser error: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -14603,7 +14628,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -14635,8 +14660,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -14658,7 +14683,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -14670,47 +14695,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -14738,39 +14763,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -14798,23 +14823,18 @@ This option will take an affect after restart. - + Cannot set printer margins Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -14862,25 +14882,25 @@ This option will take an affect after restart. Do you really want to delete? - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -14896,13 +14916,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -15458,7 +15478,7 @@ This option will take an affect after restart. - + 0 results @@ -15509,21 +15529,21 @@ This option will take an affect after restart. - + Name measurement column Name - + Full name measurement column Full name - + Group measurement column Group @@ -15745,7 +15765,7 @@ This option will take an affect after restart. - + Import from CSV @@ -15755,244 +15775,244 @@ This option will take an affect after restart. Export to CSV - + Show in Finder Show in Finder - + File '%1' doesn't exist! File '%1' doesn't exist! - + File error. File error. - + untitled %1 untitled %1 - - + + untitled untitled - + read only read only - - + + Known measurements - + All files All files - + Could not save the file Could not save the file - + known measurements - + Save as Save as - + Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. - + Could not save file Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt About Qt - + Empty Empty - + File was not saved yet. File was not saved yet. - + Unsaved changes Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save Save - + Don't Save Don't Save - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list Empty - + Unknown measurement - + &New Window &New Window - - + + Unnamed image %1 - + Open file Open file - + Length units - + Degrees - + None None - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Formula - + Description measurement column Description - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -16401,7 +16421,7 @@ Do you want to save your changes? - + Pattern unit: Pattern unit: @@ -16522,19 +16542,19 @@ Do you want to save your changes? Delete measurement - + unknown gender unknown - + male gender male - + female gender female @@ -16842,38 +16862,38 @@ Do you want to save your changes? - - + + Name measurement column Name - - + + Full name measurement column Full name - - + + Calculated value measurement column Calculated value - + Formula measurement column Formula - + Base value measurement column Base value @@ -17077,40 +17097,40 @@ Do you want to save your changes? None - + Invalid link - + Known measurements %1 - - + + Description measurement column Description - - - + + + Shift measurement column - + Empty list Empty - - - + + + %1 shift @@ -17127,22 +17147,22 @@ Do you want to save your changes? - + Millimeters - + Inches Inches - + Centimeters Centimeters - + Degrees @@ -17168,7 +17188,7 @@ Do you want to save your changes? - + 0 results @@ -18328,12 +18348,12 @@ Do you want to save your changes? - + None None - + Known measurements %1 @@ -18647,27 +18667,22 @@ Do you want to save your changes? Can't cut this spline - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19601,26 +19616,26 @@ Do you want to save your changes? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19705,21 +19720,39 @@ Do you want to save your changes? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19731,12 +19764,12 @@ Do you want to save your changes? VCommandLine - + Path to custom measure file (export mode). Path to custom measure file (export mode). - + The measure file The measure file @@ -19745,7 +19778,7 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - + Format number Format number @@ -19754,18 +19787,18 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - - + + Template number Template number - + The page width The page width - + The measure unit The measure unit @@ -19778,7 +19811,7 @@ Do you want to save your changes? Angle - + Auto crop unused length (export mode). Auto crop unused length (export mode). @@ -19795,7 +19828,7 @@ Do you want to save your changes? Layout units (as paper's one except px, export mode). - + The unit The unit @@ -19812,7 +19845,7 @@ Do you want to save your changes? Gap width x2, measured in layout units. (export mode). - + The gap width The gap width @@ -19821,7 +19854,7 @@ Do you want to save your changes? Sets layout groupping (export mode): - + Grouping type Grouping type @@ -19830,7 +19863,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - + Page height, width, units must be used all 3 at once. Page height, width, units must be used all 3 at once. @@ -19845,7 +19878,7 @@ Do you want to save your changes? - + Unsupported paper units. Unsupported paper units. @@ -19855,8 +19888,8 @@ Do you want to save your changes? Unsupported layout units. - - + + Export options can be used with single input file only. Export options can be used with single input file only. @@ -19865,17 +19898,17 @@ Do you want to save your changes? Run the program in a test mode. The program this mode load a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Test option can be used with single input file only. Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files The base filename of layout files @@ -19884,7 +19917,7 @@ Do you want to save your changes? The path to output destination folder. - + The destination folder The destination folder @@ -19905,12 +19938,12 @@ Do you want to save your changes? The height value - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -19941,22 +19974,22 @@ Do you want to save your changes? Ignore margins printing (export mode). Set all margins to 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. @@ -19965,32 +19998,32 @@ Do you want to save your changes? Shift length must be used together with shift units. - + Gap width must be used together with shift units. Gap width must be used together with shift units. - + Left margin must be used together with page units. Left margin must be used together with page units. - + Right margin must be used together with page units. Right margin must be used together with page units. - + Top margin must be used together with page units. Top margin must be used together with page units. - + Bottom margin must be used together with page units. Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. The path to output destination folder. By default the directory at which the application was started. @@ -20023,12 +20056,12 @@ Do you want to save your changes? Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. @@ -20037,17 +20070,17 @@ Do you want to save your changes? Shift layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. @@ -20064,7 +20097,7 @@ Do you want to save your changes? Shift/Offset length must be used together with shift units. - + Number corresponding to output format (default = 0, export mode): Number corresponding to output format (default = 0, export mode): @@ -20074,316 +20107,321 @@ Do you want to save your changes? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -20408,47 +20446,47 @@ Do you want to save your changes? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -20458,7 +20496,7 @@ Do you want to save your changes? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -20788,7 +20826,7 @@ Do you want to save your changes? VLayoutConverter - + Could not change version. Could not change version. @@ -20801,73 +20839,73 @@ Do you want to save your changes? - + Cannot set printer page size - + Cannot set printer margins Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 Creating file '%1' failed! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files files - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -20880,12 +20918,12 @@ Do you want to save your changes? VLayoutPiece - + Piece %1 doesn't have shape. Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21189,8 +21227,8 @@ Do you want to save your changes? - - + + Pieces of @@ -21293,12 +21331,12 @@ Do you want to save your changes? VPGraphicsPiece - + Move to - + Remove from Sheet @@ -21314,37 +21352,37 @@ Do you want to save your changes? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -21396,7 +21434,7 @@ Do you want to save your changes? - + Properties @@ -21553,9 +21591,9 @@ Do you want to save your changes? - - - + + + Export Export @@ -21605,84 +21643,84 @@ Do you want to save your changes? - + zoom - - + + Scale - + &Open &Open - + &Save &Save - + Save &As - + &Import Raw Layout Data - + E&xit E&xit - + &New &New - + About &Qt About &Qt - + About &Puzzle - + Zoom in Zoom in - + Zoom out Zoom out - + Zoom 1:1 - + Zoom fit best Zoom fit best - + Zoom sheet - - + + Preferences Preferences @@ -21703,7 +21741,7 @@ Do you want to save your changes? - + Could not extract data from file '%1'. %2 @@ -21726,102 +21764,102 @@ Do you want to save your changes? Inches - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only read only - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Open file - + Could not save the file Could not save the file - + layout - + Save as Save as - + Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. - + Could not save file Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt About Qt @@ -21858,13 +21896,13 @@ Do you want to save your changes? - + Horizontal: - + Vertical: @@ -21947,71 +21985,76 @@ Do you want to save your changes? - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print Print - - + + Print preview Print preview - - + + Print tiled Print tiled - - + + Print preview tiled Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove Remove @@ -22022,13 +22065,13 @@ Do you want to save your changes? - + &Undo &Undo - + &Redo &Redo @@ -22039,113 +22082,113 @@ Do you want to save your changes? Pixels - + Unsaved changes Unsaved changes - + Save… - + Save Save - + Don't Save Don't Save - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Cannot proceed because there are no available printers in your system. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -22155,27 +22198,27 @@ Do you want to save your changes? - + Z value - + Bottom - + Down - + Up - + Top @@ -22185,12 +22228,12 @@ Do you want to save your changes? - + sheet - + Piece %1 invalid. %2 @@ -22331,37 +22374,37 @@ Do you want to save your changes? Error creating or updating detail - + Error creating or updating single point Error creating or updating single point - - + + Error creating or updating point of end line Error creating or updating point of end line - - + + Error creating or updating point along line Error creating or updating point along line - - + + Error creating or updating point of shoulder Error creating or updating point of shoulder - - + + Error creating or updating point of normal Error creating or updating point of normal - - + + Error creating or updating point of bisector Error creating or updating point of bisector @@ -22370,128 +22413,128 @@ Do you want to save your changes? Error creating or updating point of lineintersection - - + + Error creating or updating point of contact Error creating or updating point of contact - + Error creating or updating modeling point Error creating or updating modeling point - + Error creating or updating height Error creating or updating height - + Error creating or updating triangle Error creating or updating triangle - + Error creating or updating point of intersection Error creating or updating point of intersection - - + + Error creating or updating cut spline point Error creating or updating cut spline point - - + + Error creating or updating cut spline path point Error creating or updating cut spline path point - - + + Error creating or updating cut arc point Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis Error creating or updating point of intersection curve and axis - + Error creating or updating line Error creating or updating line - - + + Error creating or updating simple curve Error creating or updating simple curve - - + + Error creating or updating curve path Error creating or updating curve path - + Error creating or updating modeling simple curve Error creating or updating modeling simple curve - + Error creating or updating modeling curve path Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc Error creating or updating simple arc - + Error creating or updating modeling arc Error creating or updating modeling arc - + Error creating or updating union details Error creating or updating union details - + Error creating or updating point of intersection arcs Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent Error creating or updating point from arc and tangent - + Error creating or updating true darts Error creating or updating true darts @@ -22508,17 +22551,17 @@ Do you want to save your changes? Unknown point type '%1'. - + Unknown spline type '%1'. Unknown spline type '%1'. - + Unknown arc type '%1'. Unknown arc type '%1'. - + Unknown tools type '%1'. Unknown tools type '%1'. @@ -22528,75 +22571,75 @@ Do you want to save your changes? Error not unique id. - + Error creating or updating point of intersection curves Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline Error creating or updating simple interactive spline - + Error creating or updating interactive spline path Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation Error creating or updating operation of rotation - + Unknown operation type '%1'. Unknown operation type '%1'. - + Error creating or updating operation of flipping by line Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving Error creating or updating operation of moving - + Error creating or updating point of line intersection Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc Error creating or updating modeling elliptical arc @@ -22606,34 +22649,34 @@ Do you want to save your changes? Detail - + Unnamed path Unnamed path - - + + Error creating or updating a piece path Error creating or updating a piece path - + Error creating or updating pin point Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -24408,108 +24451,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance Current seam allowance - + move pattern piece label move pattern piece label - + resize pattern piece label resize pattern piece label - + rotate pattern piece label rotate pattern piece label - + move pattern info label move pattern info label - + resize pattern info label resize pattern info label - + rotate pattern info label rotate pattern info label - + move grainline move grainline - + resize grainline resize grainline - + rotate grainline rotate grainline - + Options Options - + In layout In layout - + Hide main path Hide main path - + Reset piece label template - + Delete Delete - + apply save detail options - + multi deletion - + Forbid flipping Forbid flipping - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_en_US.ts b/share/translations/valentina_en_US.ts index 690fd683e..c52c9d911 100644 --- a/share/translations/valentina_en_US.ts +++ b/share/translations/valentina_en_US.ts @@ -4767,40 +4767,40 @@ Rule for choosing the next workpiece - + Three groups: big, middle, small Three groups: big, middle, small - + Two groups: big, small Two groups: big, small - + Descending area Descending area - - + + Millimiters Millimiters - - + + Centimeters Centimeters - - + + Inches Inches - + Pixels Pixels @@ -4810,22 +4810,22 @@ Create a layout - + Auto crop unused length Auto crop unused length - + Unite pages (if possible) Unite pages (if possible) - + Gap width: Gap width: - + Save length of the sheet Save length of the sheet @@ -4907,7 +4907,7 @@ Custom - + Wrong fields. Wrong fields. @@ -4920,7 +4920,7 @@ Apply settings anyway? Apply settings anyway? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4931,7 +4931,7 @@ Apply settings anyway? Descending area = 2 - + Layout options Layout options @@ -4940,7 +4940,7 @@ Apply settings anyway? Shift/Offset length: - + Rule for choosing the next workpiece Rule for choosing the next workpiece @@ -4949,17 +4949,17 @@ Apply settings anyway? Enabling for sheets that have big height will speed up creating. - + Divide into strips Divide into strips - + Multiplier Multiplier - + Set multiplier for length of the biggest workpiece in layout. Set multiplier for length of the biggest workpiece in layout. @@ -4968,7 +4968,7 @@ Apply settings anyway? x - + Enabling for sheets that have big height will speed up creating. Enabling for sheets that have big height will speed up creating. @@ -4978,7 +4978,7 @@ Apply settings anyway? Printer: - + None Printer None @@ -5009,70 +5009,85 @@ Apply settings anyway? - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -8144,7 +8159,7 @@ Apply settings anyway? Save Layout - + File name: File name: @@ -8181,8 +8196,8 @@ Apply settings anyway? Select path to destination folder - - + + File base name File base name @@ -8216,37 +8231,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins - + Right: Right: - + Left: Left: - + Top: Top: - + Bottom: Bottom: - + Paper format Paper format @@ -8256,20 +8276,20 @@ Apply settings anyway? - - - - + + + + cm cm - + Templates: Templates: - + Orientation: @@ -8279,17 +8299,17 @@ Apply settings anyway? Options - + Scale - + Horizontal: - + Vertical: @@ -10645,27 +10665,27 @@ Apply settings anyway? Point - + Point along perpendicular Point along perpendicular - + Perpendicular point along line Perpendicular point along line - + Point along bisector Point along bisector - + Point at distance and angle Point at distance and angle - + Point at distance along line Point at distance along line @@ -10678,12 +10698,12 @@ Apply settings anyway? Line - + Line between points Line between points - + Point at line intersection Point at line intersection @@ -10700,7 +10720,7 @@ Apply settings anyway? Tools for creating arcs. - + Arc Arc @@ -10728,210 +10748,215 @@ Apply settings anyway? &Pattern piece - + Measurements Measurements - + Window Window - + Toolbar files Toolbar files - + ToolBar modes ToolBar modes - + Toolbar pattern Toolbar pattern - + Toolbar options Toolbar options - + Toolbar tools Toolbar tools - + Tool options Tool options - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New New - + &New &New - + Create a new pattern Create a new pattern - + Open Open - + &Open &Open - + Open file with pattern Open file with pattern - - + + Save Save - + &Save &Save - + Save pattern Save pattern - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Save &As... - + Save not yet saved pattern Save not yet saved pattern - + Draw Draw - + Details Details - + Pointer tools Pointer tools - + New pattern piece New pattern piece - + Add new pattern piece Add new pattern piece - + Change the label of pattern piece Change the label of pattern piece @@ -10944,57 +10969,57 @@ Apply settings anyway? Tables of variables - - + + History History - + About &Qt About &Qt - + &About Valentina &About Valentina - + E&xit E&xit - + Exit the application Exit the application - + Preferences Preferences - + Pattern properties Pattern properties - - + + Zoom in Zoom in - + zoom in zoom in - - - + + + Zoom out Zoom out @@ -11011,7 +11036,7 @@ Apply settings anyway? Original Zoom - + Zoom fit best Zoom fit best @@ -11028,7 +11053,7 @@ Apply settings anyway? Report Bug... - + Report bug Report bug @@ -11045,8 +11070,8 @@ Apply settings anyway? Show online help - - + + Pattern piece %1 Pattern piece %1 @@ -11139,7 +11164,7 @@ Apply settings anyway? Select curve - + About Qt About Qt @@ -11179,7 +11204,7 @@ Apply settings anyway? - + Open file Open file @@ -11196,7 +11221,7 @@ Apply settings anyway? - + Error empty parameter. Error empty parameter. @@ -11212,17 +11237,17 @@ Apply settings anyway? Error parsing file (std::bad_alloc). - + Bad id. Bad id. - + File saved File saved - + untitled.val untitled.val @@ -11234,23 +11259,23 @@ Do you want to save your changes? - + &Undo &Undo - + &Redo &Redo - + Pattern piece: Pattern piece: - + Enter a new label for the pattern piece. Enter a new label for the pattern piece. @@ -11269,8 +11294,8 @@ Do you want to save your changes? - - + + File error. File error. @@ -11279,12 +11304,12 @@ Do you want to save your changes? File loaded - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? - + Reopen files. Reopen files. @@ -11297,12 +11322,12 @@ Do you want to save your changes? Individual measurements (*.vit) - + Special point on shoulder Special point on shoulder - + Triangle tool Triangle tool @@ -11311,42 +11336,42 @@ Do you want to save your changes? Point at intersection of arc and line - + Point from X and Y of two other points Point from X and Y of two other points - + Point intersect line and axis Point intersect line and axis - + Simple curve Simple curve - + Curved path Curved path - + Segmenting a simple curve Segmenting a simple curve - + Segment a curved path Segment a curved path - + Point intersect curve and axis Point intersect curve and axis - + Segment an arc Segment an arc @@ -11359,7 +11384,7 @@ Do you want to save your changes? Seam allowance tool - + Union tool Union tool @@ -11368,12 +11393,12 @@ Do you want to save your changes? toolBar - + Last Tool Last Tool - + Activate last used tool again Activate last used tool again @@ -11383,33 +11408,33 @@ Do you want to save your changes? Select point for X value (vertical) - + Mode Mode - + Pointer Pointer - + Config pattern piece Config pattern piece - + Layout Layout - + Show Curve Details Show Curve Details - + Show/hide control points and curve direction Show/hide control points and curve direction @@ -11418,27 +11443,27 @@ Do you want to save your changes? Tools - + Point of intersection arcs Point of intersection arcs - + Point of intersection circles Point of intersection circles - + Point from circle and tangent Point from circle and tangent - + Point from arc and tangent Point from arc and tangent - + Arc with given length Arc with given length @@ -11447,7 +11472,7 @@ Do you want to save your changes? Settings - + Layout pages Layout pages @@ -11468,27 +11493,27 @@ Do you want to save your changes? Split and save a layout into smaller pages - + Print Print - + Print tiled PDF Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) Split and print a layout into smaller pages (for regular printers) - + Print preview Print preview - + Print preview original layout Print preview original layout @@ -11497,8 +11522,8 @@ Do you want to save your changes? Export As... - - + + Export original layout Export original layout @@ -11540,7 +11565,7 @@ Do you want to save your changes? - + Layout mode Layout mode @@ -11549,7 +11574,7 @@ Do you want to save your changes? You can't use Layout mode yet. Please, create at least one workpiece. - + Unsaved changes Unsaved changes @@ -11588,12 +11613,12 @@ Do you want to save your changes? Standard measurements (*.vst);;Individual measurements (*.vit) - + You can't export empty scene. You can't export empty scene. - + Create new Layout Create new Layout @@ -11625,7 +11650,7 @@ Do you want to save your changes? Measurement file contains invalid known measurement(s). - + Measurement file has unknown format. Measurement file has unknown format. @@ -11652,13 +11677,13 @@ Do you want to save your changes? Couldn't sync measurements. - + Couldn't update measurements. Couldn't update measurements. - - + + The measurements file '%1' could not be found. The measurements file '%1' could not be found. @@ -11667,7 +11692,7 @@ Do you want to save your changes? The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location - + Loading measurements file Loading measurements file @@ -11684,9 +11709,9 @@ Do you want to save your changes? Couldn't set size. File wasn't opened. - - - + + + The method %1 does nothing in GUI mode The method %1 does nothing in GUI mode @@ -11703,45 +11728,45 @@ Do you want to save your changes? Couldn't set height. File wasn't opened. - - - - + + + + Export error. Export error. - + Please, provide one input file. Please, provide one input file. - + Print an original layout Print an original layout - + Preview tiled PDF Preview tiled PDF - + Print preview tiled layout Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -11764,7 +11789,7 @@ Do you want to save your changes? Couldn't unload measurements. Some of them are used in the pattern. - + True darts True darts @@ -11788,7 +11813,7 @@ Do you want to save your changes? Save... - + Don't Save Don't Save @@ -11821,7 +11846,7 @@ Do you want to save your changes? Report Bug... - + Point intersection curves Point intersection curves @@ -11839,7 +11864,7 @@ Do you want to save your changes? Measurements was changed. Do you want to sync measurements now? - + Curve tool which uses point as control handle Curve tool which uses point as control handle @@ -11874,14 +11899,14 @@ Do you want to save your changes? Select one or more objects, <b>Enter</b> - finish creation - + Rotate objects Rotate objects - - - + + + Close pattern Close pattern @@ -11894,12 +11919,12 @@ Do you want to save your changes? Tool pointer - + Midpoint between two points Midpoint between two points - + Group Group @@ -11920,8 +11945,8 @@ Do you want to save your changes? You can't use now the Layout mode. Please, include at least one detail in layout. - - + + Original zoom Original zoom @@ -11951,22 +11976,22 @@ Do you want to save your changes? Size: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line Flipping objects by line - + Flipping objects by axis Flipping objects by axis - + Move objects Move objects @@ -11985,7 +12010,7 @@ Do you want to save your changes? Measurements have been synced - + Elliptical Arc Elliptical Arc @@ -12005,89 +12030,89 @@ Do you want to save your changes? Could not save the file - + read only read only - + Variables Table Variables Table - + Contains information about increments and internal variables Contains information about increments and internal variables - + Load Individual Load Individual - + Load Individual measurements file Load Individual measurements file - - + + Load Multisize Load Multisize - + Load multisize measurements file Load multisize measurements file - + Open Tape Open Tape - + Edit Current Edit Current - + Edit linked to the pattern measurements Edit linked to the pattern measurements - + Sync Sync - + Synchronize linked to the pattern measurements after change Synchronize linked to the pattern measurements after change - + Unload Current Unload Current - + Unload measurements if they were not used in a pattern file Unload measurements if they were not used in a pattern file - - + + Individual measurements Individual measurements - - + + Multisize measurements Multisize measurements @@ -12098,7 +12123,7 @@ Do you want to save your changes? Pattern files - + Pin tool Pin tool @@ -12108,17 +12133,17 @@ Do you want to save your changes? Select pin point - + Insert node tool Insert node tool - + Open Tape app for creating or editing measurements file Open Tape app for creating or editing measurements file - + Export increments to CSV Export increments to CSV @@ -12158,143 +12183,143 @@ Do you want to save your changes? You can't use Layout mode yet. - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool - + Duplicate detail tool @@ -12304,7 +12329,7 @@ Do you want to save your changes? - + The measurements file '%1' could not be found or provides not enough information. @@ -12324,17 +12349,17 @@ Do you want to save your changes? Changes applied. - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -12358,27 +12383,27 @@ Do you want to save your changes? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -12389,119 +12414,119 @@ Do you want to save your changes? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove Remove - + Edit current - + Editor - + Create or edit a watermark @@ -12511,37 +12536,37 @@ Do you want to save your changes? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update Update - + Update manual layout @@ -12567,87 +12592,87 @@ Do you want to save your changes? Select folder - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -12732,38 +12757,38 @@ Do you want to save your changes? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled untitled - + All files All files - + Save Image - + Visibility group - + Show accuracy radius @@ -12807,7 +12832,7 @@ Do you want to save your changes? Cannot proceed because there are no available printers in your system. - + unnamed unnamed @@ -12820,7 +12845,7 @@ Do you want to save your changes? The layout was not updated since last pattern modification. Do you want to continue? - + Couldn't prepare data for creation layout Couldn't prepare data for creation layout @@ -12861,90 +12886,90 @@ Do you want to save your changes? Cannot set printer margins - - + + Can't create a path - + Preparing details for layout - + Pattern Pattern - + Name Name - + Value Value - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description Description - + Measurement file has unknown format. Measurement file has unknown format. - + File error. File error. - + Measurement file doesn't include all required measurements. Measurement file doesn't include all required measurements. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -12973,7 +12998,7 @@ Do you want to save your changes? MoveLabel - + move point label move point label @@ -14471,14 +14496,14 @@ This option will take an affect after restart. Changes applied. - + Can't convert toUInt parameter Can't convert toUInt parameter - + Can't convert toBool parameter Can't convert toBool parameter @@ -14489,7 +14514,7 @@ This option will take an affect after restart. Got empty parameter - + Can't convert toDouble parameter @@ -14518,22 +14543,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -14543,7 +14568,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -14587,13 +14612,13 @@ This option will take an affect after restart. Parser error: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -14603,7 +14628,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -14635,8 +14660,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -14658,7 +14683,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -14670,47 +14695,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -14738,39 +14763,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -14798,23 +14823,18 @@ This option will take an affect after restart. - + Cannot set printer margins Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -14862,25 +14882,25 @@ This option will take an affect after restart. Do you really want to delete? - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -14896,13 +14916,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -15458,7 +15478,7 @@ This option will take an affect after restart. - + 0 results @@ -15509,21 +15529,21 @@ This option will take an affect after restart. - + Name measurement column Name - + Full name measurement column Full name - + Group measurement column Group @@ -15745,7 +15765,7 @@ This option will take an affect after restart. - + Import from CSV @@ -15755,244 +15775,244 @@ This option will take an affect after restart. Export to CSV - + Show in Finder Show in Finder - + File '%1' doesn't exist! File '%1' doesn't exist! - + File error. File error. - + untitled %1 untitled %1 - - + + untitled untitled - + read only read only - - + + Known measurements - + All files All files - + Could not save the file Could not save the file - + known measurements - + Save as Save as - + Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. - + Could not save file Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt About Qt - + Empty Empty - + File was not saved yet. File was not saved yet. - + Unsaved changes Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save Save - + Don't Save Don't Save - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list Empty - + Unknown measurement - + &New Window &New Window - - + + Unnamed image %1 - + Open file Open file - + Length units - + Degrees - + None None - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Formula - + Description measurement column Description - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -16401,7 +16421,7 @@ Do you want to save your changes? - + Pattern unit: Pattern unit: @@ -16522,19 +16542,19 @@ Do you want to save your changes? Delete measurement - + unknown gender unknown - + male gender male - + female gender female @@ -16842,38 +16862,38 @@ Do you want to save your changes? - - + + Name measurement column Name - - + + Full name measurement column Full name - - + + Calculated value measurement column Calculated value - + Formula measurement column Formula - + Base value measurement column Base value @@ -17077,40 +17097,40 @@ Do you want to save your changes? None - + Invalid link - + Known measurements %1 - - + + Description measurement column Description - - - + + + Shift measurement column - + Empty list Empty - - - + + + %1 shift @@ -17127,22 +17147,22 @@ Do you want to save your changes? - + Millimeters - + Inches Inches - + Centimeters Centimeters - + Degrees @@ -17168,7 +17188,7 @@ Do you want to save your changes? - + 0 results @@ -18328,12 +18348,12 @@ Do you want to save your changes? - + None None - + Known measurements %1 @@ -18647,27 +18667,22 @@ Do you want to save your changes? Can't cut this spline - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19601,26 +19616,26 @@ Do you want to save your changes? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19705,21 +19720,39 @@ Do you want to save your changes? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19731,12 +19764,12 @@ Do you want to save your changes? VCommandLine - + Path to custom measure file (export mode). Path to custom measure file (export mode). - + The measure file The measure file @@ -19745,7 +19778,7 @@ Do you want to save your changes? Number corresponding to output format (default = 0, export mode): - + Format number Format number @@ -19754,18 +19787,18 @@ Do you want to save your changes? Number corresponding to page template (default = 0, export mode): - - + + Template number Template number - + The page width The page width - + The measure unit The measure unit @@ -19778,7 +19811,7 @@ Do you want to save your changes? Angle - + Auto crop unused length (export mode). Auto crop unused length (export mode). @@ -19795,7 +19828,7 @@ Do you want to save your changes? Layout units (as paper's one except px, export mode). - + The unit The unit @@ -19812,7 +19845,7 @@ Do you want to save your changes? Gap width x2, measured in layout units. (export mode). - + The gap width The gap width @@ -19821,7 +19854,7 @@ Do you want to save your changes? Sets layout groupping (export mode): - + Grouping type Grouping type @@ -19830,7 +19863,7 @@ Do you want to save your changes? Cannot use pageformat and page explicit size/units together. - + Page height, width, units must be used all 3 at once. Page height, width, units must be used all 3 at once. @@ -19845,7 +19878,7 @@ Do you want to save your changes? - + Unsupported paper units. Unsupported paper units. @@ -19855,8 +19888,8 @@ Do you want to save your changes? Unsupported layout units. - - + + Export options can be used with single input file only. Export options can be used with single input file only. @@ -19865,17 +19898,17 @@ Do you want to save your changes? Run the program in a test mode. The program this mode load a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Test option can be used with single input file only. Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files The base filename of layout files @@ -19884,7 +19917,7 @@ Do you want to save your changes? The path to output destination folder. - + The destination folder The destination folder @@ -19905,12 +19938,12 @@ Do you want to save your changes? The height value - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -19941,22 +19974,22 @@ Do you want to save your changes? Ignore margins printing (export mode). Set all margins to 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. @@ -19965,32 +19998,32 @@ Do you want to save your changes? Shift/Offset length must be used together with shift units. - + Gap width must be used together with shift units. Gap width must be used together with shift units. - + Left margin must be used together with page units. Left margin must be used together with page units. - + Right margin must be used together with page units. Right margin must be used together with page units. - + Top margin must be used together with page units. Top margin must be used together with page units. - + Bottom margin must be used together with page units. Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. The path to output destination folder. By default the directory at which the application was started. @@ -20023,12 +20056,12 @@ Do you want to save your changes? Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. @@ -20037,17 +20070,17 @@ Do you want to save your changes? Shift/Offset layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. @@ -20064,7 +20097,7 @@ Do you want to save your changes? Shift/Offset length must be used together with shift units. - + Number corresponding to output format (default = 0, export mode): Number corresponding to output format (default = 0, export mode): @@ -20074,316 +20107,321 @@ Do you want to save your changes? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -20408,47 +20446,47 @@ Do you want to save your changes? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -20458,7 +20496,7 @@ Do you want to save your changes? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -20788,7 +20826,7 @@ Do you want to save your changes? VLayoutConverter - + Could not change version. Could not change version. @@ -20801,73 +20839,73 @@ Do you want to save your changes? - + Cannot set printer page size - + Cannot set printer margins Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 Creating file '%1' failed! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files files - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -20880,12 +20918,12 @@ Do you want to save your changes? VLayoutPiece - + Piece %1 doesn't have shape. Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21189,8 +21227,8 @@ Do you want to save your changes? - - + + Pieces of @@ -21293,12 +21331,12 @@ Do you want to save your changes? VPGraphicsPiece - + Move to - + Remove from Sheet @@ -21314,37 +21352,37 @@ Do you want to save your changes? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -21396,7 +21434,7 @@ Do you want to save your changes? - + Properties @@ -21553,9 +21591,9 @@ Do you want to save your changes? - - - + + + Export Export @@ -21605,84 +21643,84 @@ Do you want to save your changes? - + zoom - - + + Scale - + &Open &Open - + &Save &Save - + Save &As - + &Import Raw Layout Data - + E&xit E&xit - + &New &New - + About &Qt About &Qt - + About &Puzzle - + Zoom in Zoom in - + Zoom out Zoom out - + Zoom 1:1 - + Zoom fit best Zoom fit best - + Zoom sheet - - + + Preferences Preferences @@ -21703,7 +21741,7 @@ Do you want to save your changes? - + Could not extract data from file '%1'. %2 @@ -21726,102 +21764,102 @@ Do you want to save your changes? Inches - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only read only - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Open file - + Could not save the file Could not save the file - + layout - + Save as Save as - + Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. - + Could not save file Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt About Qt @@ -21858,13 +21896,13 @@ Do you want to save your changes? - + Horizontal: - + Vertical: @@ -21947,71 +21985,76 @@ Do you want to save your changes? - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print Print - - + + Print preview Print preview - - + + Print tiled Print tiled - - + + Print preview tiled Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove Remove @@ -22022,13 +22065,13 @@ Do you want to save your changes? - + &Undo &Undo - + &Redo &Redo @@ -22039,113 +22082,113 @@ Do you want to save your changes? Pixels - + Unsaved changes Unsaved changes - + Save… - + Save Save - + Don't Save Don't Save - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Cannot proceed because there are no available printers in your system. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -22155,27 +22198,27 @@ Do you want to save your changes? - + Z value - + Bottom - + Down - + Up - + Top @@ -22185,12 +22228,12 @@ Do you want to save your changes? - + sheet - + Piece %1 invalid. %2 @@ -22331,37 +22374,37 @@ Do you want to save your changes? Error creating or updating detail - + Error creating or updating single point Error creating or updating single point - - + + Error creating or updating point of end line Error creating or updating point of end line - - + + Error creating or updating point along line Error creating or updating point along line - - + + Error creating or updating point of shoulder Error creating or updating point of shoulder - - + + Error creating or updating point of normal Error creating or updating point of normal - - + + Error creating or updating point of bisector Error creating or updating point of bisector @@ -22370,128 +22413,128 @@ Do you want to save your changes? Error creating or updating point of lineintersection - - + + Error creating or updating point of contact Error creating or updating point of contact - + Error creating or updating modeling point Error creating or updating modeling point - + Error creating or updating height Error creating or updating height - + Error creating or updating triangle Error creating or updating triangle - + Error creating or updating point of intersection Error creating or updating point of intersection - - + + Error creating or updating cut spline point Error creating or updating cut spline point - - + + Error creating or updating cut spline path point Error creating or updating cut spline path point - - + + Error creating or updating cut arc point Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis Error creating or updating point of intersection curve and axis - + Error creating or updating line Error creating or updating line - - + + Error creating or updating simple curve Error creating or updating simple curve - - + + Error creating or updating curve path Error creating or updating curve path - + Error creating or updating modeling simple curve Error creating or updating modeling simple curve - + Error creating or updating modeling curve path Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc Error creating or updating simple arc - + Error creating or updating modeling arc Error creating or updating modeling arc - + Error creating or updating union details Error creating or updating union details - + Error creating or updating point of intersection arcs Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent Error creating or updating point from arc and tangent - + Error creating or updating true darts Error creating or updating true darts @@ -22508,17 +22551,17 @@ Do you want to save your changes? Unknown point type '%1'. - + Unknown spline type '%1'. Unknown spline type '%1'. - + Unknown arc type '%1'. Unknown arc type '%1'. - + Unknown tools type '%1'. Unknown tools type '%1'. @@ -22528,75 +22571,75 @@ Do you want to save your changes? Error not unique id. - + Error creating or updating point of intersection curves Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline Error creating or updating simple interactive spline - + Error creating or updating interactive spline path Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation Error creating or updating operation of rotation - + Unknown operation type '%1'. Unknown operation type '%1'. - + Error creating or updating operation of flipping by line Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving Error creating or updating operation of moving - + Error creating or updating point of line intersection Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc Error creating or updating modeling elliptical arc @@ -22606,34 +22649,34 @@ Do you want to save your changes? Detail - + Unnamed path Unnamed path - - + + Error creating or updating a piece path Error creating or updating a piece path - + Error creating or updating pin point Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -24408,108 +24451,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance Current seam allowance - + move pattern piece label move pattern piece label - + resize pattern piece label resize pattern piece label - + rotate pattern piece label rotate pattern piece label - + move pattern info label move pattern info label - + resize pattern info label resize pattern info label - + rotate pattern info label rotate pattern info label - + move grainline move grainline - + resize grainline resize grainline - + rotate grainline rotate grainline - + Options Options - + In layout In layout - + Hide main path Hide main path - + Reset piece label template - + Delete Delete - + apply save detail options - + multi deletion - + Forbid flipping Forbid flipping - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_es_ES.ts b/share/translations/valentina_es_ES.ts index 4ba52d326..6dc255430 100644 --- a/share/translations/valentina_es_ES.ts +++ b/share/translations/valentina_es_ES.ts @@ -1296,22 +1296,22 @@ Move on top - Mover a la parte superior + Mover a la parte superior Move up - Mover arriba + Mover arriba Move down - Mover abajo + Mover abajo Move on bottom - Mover a la parte inferior + Mover a la parte inferior @@ -4767,40 +4767,40 @@ Principio de la elección de la próxima pieza de trabajo - + Three groups: big, middle, small Tres grupos: grande, mediano, pequeño - + Two groups: big, small Dos grupos: grande, pequeño - + Descending area Área descendente - - + + Millimiters Milímetros - - + + Centimeters Centímetros - - + + Inches Pulgadas - + Pixels Píxeles @@ -4810,22 +4810,22 @@ Crear un diseño - + Auto crop unused length Recorte automático del largo no usado - + Unite pages (if possible) Unificar páginas (si es posible) - + Gap width: Ancho del hueco: - + Save length of the sheet Guardar longitud de la hoja @@ -4907,7 +4907,7 @@ Personalizado - + Wrong fields. Campos erróneos. @@ -4919,7 +4919,7 @@ Apply settings anyway? ¿Aplicar los cambios? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4930,7 +4930,7 @@ Apply settings anyway? Área descendente = 2 - + Layout options Opciones de diseño @@ -4939,7 +4939,7 @@ Apply settings anyway? Longitud de Cambio/Desplazamiento: - + Rule for choosing the next workpiece Regla para elegir la siguiente pieza de trabajo @@ -4948,17 +4948,17 @@ Apply settings anyway? Habilitarlo para hojas que tienen una gran altura va a acelerar la creación. - + Divide into strips Dividir en tiras - + Multiplier Multiplicador - + Set multiplier for length of the biggest workpiece in layout. Establezca el multiplicador por la longitud de la pieza mas grande en el diseño. @@ -4967,7 +4967,7 @@ Apply settings anyway? x - + Enabling for sheets that have big height will speed up creating. Habilitar hojas de gran altura acelerará la creación. @@ -4977,7 +4977,7 @@ Apply settings anyway? Impresora: - + None Printer Ninguno @@ -5008,7 +5008,7 @@ Apply settings anyway? Ignorar margenes - + Margins go beyond printing. Apply settings anyway? @@ -5017,63 +5017,78 @@ Apply settings anyway? Aplicar características de todos modos? - + Follow grainline Seguir hilo de la tela - + Time: Hora: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. Tiempo dado para que el algoritmo encuentre el mejor diseño. - + Efficiency: Eficiencia: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority Prioridad manual - + Nest quantity of copies according to piece settings. Anidar cantidad de copias de acuerdo a la configuración de la pieza. - + Nest quantity Cantidad a anidar - + Auto crop unused width Recorte automático del ancho no usado - + Prefer one sheet solution Prefiere una solución de hoja - + min minutes min - + Enable this option to prefer getting one sheet solutions. Habilite esta opción para preferir obtener soluciones de una hoja. @@ -8145,7 +8160,7 @@ Aplicar características de todos modos? Guardar diseño - + File name: Nombre de archivo: @@ -8182,8 +8197,8 @@ Aplicar características de todos modos? Seleccionar ruto a la carpeta de destino - - + + File base name Nombre base del archivo @@ -8217,37 +8232,42 @@ Aplicar características de todos modos? + Boundary together with notches + + + + Not available options - + Margins Margenes - + Right: Derecha: - + Left: Izquierda: - + Top: Superior: - + Bottom: Inferior: - + Paper format Formato de papel @@ -8257,20 +8277,20 @@ Aplicar características de todos modos? Navegar… - - - - + + + + cm cm - + Templates: Plantillas: - + Orientation: Orientación: @@ -8280,17 +8300,17 @@ Aplicar características de todos modos? Opciones - + Scale Escala - + Horizontal: Horizontal: - + Vertical: Vertical: @@ -9805,22 +9825,22 @@ Aplicar características de todos modos? Move on top - Mover a la parte superior + Mover a la parte superior Move up - Mover arriba + Mover arriba Move down - Mover abajo + Mover abajo Move on bottom - Mover a la parte inferior + Mover a la parte inferior @@ -10646,27 +10666,27 @@ Aplicar características de todos modos? Punto - + Point along perpendicular Punto a lo largo de la perpendicular - + Perpendicular point along line Punto Perpendicular a lo largo de la línea - + Point along bisector Punto a lo largo de la bisectriz - + Point at distance and angle Punto de distancia y ángulo - + Point at distance along line Punto de distancia a lo largo de la línea @@ -10679,12 +10699,12 @@ Aplicar características de todos modos? Línea - + Line between points Línea entre puntos - + Point at line intersection Punto de intersección en línea @@ -10701,7 +10721,7 @@ Aplicar características de todos modos? Herramientas para crear arcos. - + Arc Arco @@ -10729,210 +10749,215 @@ Aplicar características de todos modos? &Pieza de patrón - + Measurements Medidas - + Window Ventana - + Toolbar files Barra de herramientas archivos - + ToolBar modes Barra de herramientas modos - + Toolbar pattern Barra de herramientas patrón - + Toolbar options Barra de herramientas opciones - + Toolbar tools Barra de herramientas de herramientas - + Tool options Opciones de herramienta - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Nuevo - + &New &Nuevo - + Create a new pattern Crear un nuevo patrón - + Open Abrir - + &Open &Abrir - + Open file with pattern Abrir archivo con patrón - - + + Save Guardar - + &Save &Guardar - + Save pattern Guardar patrón - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Guardar &Como... - + Save not yet saved pattern El patrón aún no se ha guardao - + Draw Dibujar - + Details Detalles - + Pointer tools Herramientas de puntero - + New pattern piece Nueva pieza de patrón - + Add new pattern piece Añadir nueva pieza de patrón - + Change the label of pattern piece Cambiar etiqueta de pieza de patrón @@ -10945,57 +10970,57 @@ Aplicar características de todos modos? Tablas de variables - - + + History Historia - + About &Qt Sobre &Qt - + &About Valentina &Sobre Valentina - + E&xit &Salida - + Exit the application Salir de la aplicación - + Preferences Preferencias - + Pattern properties Propiedades de patrón - - + + Zoom in Aumentar zoom - + zoom in aumentar zoom - - - + + + Zoom out Alejar zoom @@ -11012,7 +11037,7 @@ Aplicar características de todos modos? Zoom Original - + Zoom fit best Encajar a mejor zoom @@ -11029,7 +11054,7 @@ Aplicar características de todos modos? Informar de un error... - + Report bug Informar de un error @@ -11046,8 +11071,8 @@ Aplicar características de todos modos? Mostrar ayuda en línea - - + + Pattern piece %1 Pieza de patrón %1 @@ -11140,7 +11165,7 @@ Aplicar características de todos modos? Seleccionar curva - + About Qt Sobre Qt @@ -11180,7 +11205,7 @@ Aplicar características de todos modos? - + Open file Abrir archivo @@ -11197,7 +11222,7 @@ Aplicar características de todos modos? - + Error empty parameter. Error parámetro vacío. @@ -11213,17 +11238,17 @@ Aplicar características de todos modos? Error analizando archivo (std::bad_alloc). - + Bad id. Identificación incorrecta. - + File saved Archivo guardado - + untitled.val Sin título.val @@ -11235,23 +11260,23 @@ Quiere guardar los cambios? - + &Undo &Deshacer - + &Redo &Rehacer - + Pattern piece: Pieza de patrón: - + Enter a new label for the pattern piece. Introduzca nueva etiqueta para la pieza de patrón. @@ -11270,8 +11295,8 @@ Quiere guardar los cambios? - - + + File error. Error en archivo. @@ -11280,12 +11305,12 @@ Quiere guardar los cambios? Archivo cargado - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina no se cerró correctamente. ¿Quieres volver a abrir archivos (%1) que había abierto? - + Reopen files. Reabrir archivos. @@ -11298,12 +11323,12 @@ Quiere guardar los cambios? Medidas individuales (*.vit) - + Special point on shoulder Punto especial en el hombro - + Triangle tool Herramienta triángulo @@ -11312,42 +11337,42 @@ Quiere guardar los cambios? Punto de intersección del arco y la línea - + Point from X and Y of two other points Punto de X e Y de otros dos puntos - + Point intersect line and axis Punto de intersección de línea y eje - + Simple curve Curva simple - + Curved path Trazado curvado - + Segmenting a simple curve Segmentación de una curva simple - + Segment a curved path Segmento de un trazado curvo - + Point intersect curve and axis Punto de intersección de la curva y el eje - + Segment an arc Segmento de un arco @@ -11360,7 +11385,7 @@ Quiere guardar los cambios? Herramienta margen de costura - + Union tool Herramienta de unión @@ -11369,12 +11394,12 @@ Quiere guardar los cambios? Barra de herramientas - + Last Tool Última herramienta - + Activate last used tool again Activar última herramienta usada de nuevo @@ -11384,33 +11409,33 @@ Quiere guardar los cambios? Seleccionar punto para valor X (vertical) - + Mode Modo - + Pointer Puntero - + Config pattern piece Configurar pieza de patrón - + Layout Diseño - + Show Curve Details Mostrar detalles de la curva - + Show/hide control points and curve direction Mostrar/ocultar puntos de control y dirección de la curva @@ -11419,27 +11444,27 @@ Quiere guardar los cambios? Herramientas - + Point of intersection arcs Punto de intersección de arcos - + Point of intersection circles Punto de intersección de círculos - + Point from circle and tangent Punto desde un círculo y tangente - + Point from arc and tangent Punto desde un arco y tangente - + Arc with given length Arco con una longitud dada @@ -11448,7 +11473,7 @@ Quiere guardar los cambios? Ajustes - + Layout pages Páginas de diseño @@ -11469,27 +11494,27 @@ Quiere guardar los cambios? Dividir y guardar el diseño en páginas pequeñas - + Print Imprimir - + Print tiled PDF Imprimir PDF en mosaico - + Split and print a layout into smaller pages (for regular printers) Divide e imprime el diseño en páginas pequeñas (para impresoras normales) - + Print preview Previsualizar impresión - + Print preview original layout Vista previa de impresión del diseño original @@ -11498,8 +11523,8 @@ Quiere guardar los cambios? Exportar como... - - + + Export original layout Exporta el diseño original @@ -11541,7 +11566,7 @@ Quiere guardar los cambios? - + Layout mode Modo diseño @@ -11550,7 +11575,7 @@ Quiere guardar los cambios? No puede usar el modo de Diseño en este momento. Por favor crear al menos una pieza de trabajo. - + Unsaved changes Cambios sin guardar @@ -11589,12 +11614,12 @@ Quiere guardar los cambios? Medidas estándar (*.vst);;Medidas individuales (*.vit) - + You can't export empty scene. No puedes exportar una escena vacía. - + Create new Layout Crear nuevo diseño @@ -11626,7 +11651,7 @@ Quiere guardar los cambios? El archivo de medidas contiene medida(s) conocidas no válidas. - + Measurement file has unknown format. El archivo de medidas tiene un formato desconocido. @@ -11653,13 +11678,13 @@ Quiere guardar los cambios? No se pudo sincronizar las medidas. - + Couldn't update measurements. No se pudieron actualizar las medidas. - - + + The measurements file '%1' could not be found. No se ha podido encontrar el archivo de medidas '%1'. @@ -11668,7 +11693,7 @@ Quiere guardar los cambios? El archivo de medidas <br/><br/> <b>%1</b> <br/><br/> no se ha podido encontrar. Quieres actualizar la ubicación del archivo - + Loading measurements file Cargando archivo de medidas @@ -11685,9 +11710,9 @@ Quiere guardar los cambios? No se pudo establecer la talla. No se abrió el archivo. - - - + + + The method %1 does nothing in GUI mode El método %1 no hace nada en el modo de interfaz gráfica @@ -11704,45 +11729,45 @@ Quiere guardar los cambios? No se pudo establecer la altura. No se abrió el archivo. - - - - + + + + Export error. Error en exportación. - + Please, provide one input file. Por favor, proporcione un archivo de entrada. - + Print an original layout Imprimir un diseño original - + Preview tiled PDF Vista previa de PDF en mosaicos - + Print preview tiled layout Vista previa de impresión del diseño en mosaicos - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Modo para trabajar con piezas del patrón. Estas son las piezas del patrón base para ir a la siguiente etapa &quot;Modo de detalles&quot;. Antes de que sea capaz de activar el &quot;Modo de detalles&quot; necesita crear al menos un detalle.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Modo para trabajar con detalles. Antes de que sea capaz de activar el "Modo de detalles" necesita crear al menos un detalle en la etapa. &quot;Modo de dibujo&quot;. Los detalles creados en esta etapa se usarán para crear un diseño. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Modo para crear un diseño de detalles. Este modo esta disponible si se creo al menos un detalle en la etapa &quot;Modo de detalles&quot;. El diseño puede ser exportado a su formato de archivo preferido y se puede guardar en el disco duro.</p></body></html> @@ -11766,7 +11791,7 @@ Quiere guardar los cambios? el patrón. - + True darts Pinzas verdaderas @@ -11790,7 +11815,7 @@ el patrón. Guardar... - + Don't Save No guardar @@ -11823,7 +11848,7 @@ el patrón. Informar de un error... - + Point intersection curves Punto de intersección de curvas @@ -11841,7 +11866,7 @@ el patrón. Las medidas fueron modificadas. Quieres sincronizar las medidas ahora? - + Curve tool which uses point as control handle Herramienta curva que utiliza el punto como control de manejo @@ -11876,14 +11901,14 @@ el patrón. Seleccione uno o más objetos, <b>Enter</b> - terminar la creación - + Rotate objects Rotar objetos - - - + + + Close pattern Cerrar patrón @@ -11896,12 +11921,12 @@ el patrón. Herramienta Puntero - + Midpoint between two points Punto intermedio entre dos puntos - + Group Grupo @@ -11922,8 +11947,8 @@ el patrón. Usted no puede utilizar el modo Diseño ahora. Por favor, incluya al menos un detalle en el diseño. - - + + Original zoom Zoom original @@ -11953,22 +11978,22 @@ el patrón. Tamaño: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? El archivo de medidas <br/><br/> <b>%1</b> <br/><br/> no pudo ser encontrado. ¿Quiere actualizar la ubicación del archivo? - + Flipping objects by line Objetos volteados por línea - + Flipping objects by axis Objetos volteados por eje - + Move objects Mover objetos @@ -11987,7 +12012,7 @@ el patrón. Las medidas han sido sincronizadas - + Elliptical Arc Arco Elíptico @@ -12007,89 +12032,89 @@ el patrón. No pudo guardarse el archivo - + read only sólo lectura - + Variables Table Tabla de variables - + Contains information about increments and internal variables Contiene información acerca de incrementos y variables internas - + Load Individual Cargar Individual - + Load Individual measurements file Cargar archivo de medidas Individual - - + + Load Multisize Cargar Multitalla - + Load multisize measurements file Cargar archivo de medidas multitalla - + Open Tape Abrir Tape - + Edit Current Editar Actual - + Edit linked to the pattern measurements Edición vinculado a las medidas del patrón - + Sync Sincronizar - + Synchronize linked to the pattern measurements after change Sincroniza vinculado a las medidas del patrón después del cambio - + Unload Current Descargar Actual - + Unload measurements if they were not used in a pattern file Descargar medidas si ellas no fueron usadas en un archivo de patrón - - + + Individual measurements Medidas individuales - - + + Multisize measurements Medidas Multitalla @@ -12100,7 +12125,7 @@ el patrón. Archivos Patrones - + Pin tool Herramienta de Anclaje @@ -12110,17 +12135,17 @@ el patrón. Seleccionar punto anclaje - + Insert node tool Insertar herramienta nodo - + Open Tape app for creating or editing measurements file Abrir aplicación Tape para crear o editar archivo de medidas - + Export increments to CSV Exportar incrementos a CSV @@ -12160,143 +12185,143 @@ el patrón. Usted no puede usar el modo Diseño aun. - + Zoom fit best current Mejor ajuste zoom actual - + zoom fit best current pattern piece mejor ajuste zoom para patrón de pieza actual - + Export details skiping the Layout stage Exportar detalles omitiendo la etapa Diseño - + You don't have enough details to export. Please, include at least one detail in layout. Usted no tiene suficientes detalles para exportar. Por favor, incluya al menos un detalle en el diseño. - + Export details Exportar detalles - + Can't export details. No se puede exportar detalles. - + Label template editor Editor de plantilla de etiqueta - + Workpiece tool Herramienta Pieza de trabajo - + Internal path tool Herramienta de ruta interna - + Save &As… Guardar &Como… - + Report Bug… Reportar Error… - + Export As… Exportar Como… - + Save… Guardar… - + Final measurements Medidas finales - + Export Final Measurements to CSV Exportar Medidas Finales a CSV - + You can't export empty scene. Please, include at least one detail in layout. Usted no puede exportar una escena vacía. Por favor, incluya al menos un detalle en el diseño. - + Export final measurements error. Error al exportar medidas finales. - + Destination path is empty. La ruta de destino esta vacía. - + Next pattern piece Siguiente pieza del patrón - + Ctrl+PgDown Ctrl+PgDown - + Previous pattern piece Pieza del patrón previa - + Ctrl+PgUp Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool Herramienta de marcas del patrón - + Duplicate detail tool Herramienta detalle duplicado @@ -12306,7 +12331,7 @@ el patrón. Seleccionar punto de centro marcas del patrón - + The measurements file '%1' could not be found or provides not enough information. El archivo de medidas '%1' no pudo ser encontrado o no dio suficiente información. @@ -12326,17 +12351,17 @@ el patrón. Cambios aplicados. - + Cannot save settings. Access denied. No se puede guardar configuración. Acceso denegado. - + Ctrl+O Ctrl+O - + Cannot read settings from a malformed .INI file. No se puede leer la configuración desde un archivo .INI deforme. @@ -12360,27 +12385,27 @@ el patrón. Seleccione uno o mas objetos, presionar <b>%1</b> - para selección múltiple, <b>%2</b> - confirmar selecciòn - + Point of intersection circle and segment Punto de intersección circulo y segmento - + Increase label font Aumentar fuente de etiqueta - + Decrease label font Disminuir fuente de etiqueta - + Original label font Fuente de etiqueta original - + Hide labels Ocultar etiquetas @@ -12391,119 +12416,119 @@ el patrón. Grupos de visibilidad - - + + Export recipe Exportar receta - + Recipe files Archivos receta - + recipe receta - + Could not save recipe. %1 No se pudo guardar receta. %1 - + Curved path tool which uses point as control handle Herramienta de trayectoria curvada que utiliza punto como manejador de control - + Point of intersection arc and axis Punto de intersección de arco y eje - + Show main path Mostrar la ruta principal - + Globally show pieces main path Mostrar globalmente la ruta principal de las piezas - - + + Pattern messages Mensajes de patrón - + Clear all messages Limpiar todos los mensajes - + Filter Filtro - + DEBUG DEPURACION - + WARNING ADVERTENCIA - + CRITICAL CRITICO - + FATAL FATAL - + INFO INFORMACION - + Auto refresh the list with each parse Actualizar automáticamente la lista con cada análisis - + Watermark Marca de Agua - + Load Cargar - + Remove Quitar - + Edit current Editar actual - + Editor Editor - + Create or edit a watermark Crear o editar una marca de agua @@ -12513,37 +12538,37 @@ el patrón. Archivos de marca de agua - + Manual Layout Diseño Manual - + Open Puzzle Abrir Puzzle - + Open the Puzzle app Abrir la aplicación Puzzle - + Create - + Create manual layout Crear diseño manual - + Update Actualizar - + Update manual layout Actualizar el diseño manual @@ -12569,87 +12594,87 @@ el patrón. Selecciona carpeta - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. No se pudo establecer la dimensión A. Necesita un archivo con medidas multitalla. - + Couldn't set dimension A. File wasn't opened. No se pudo establecer la dimensión A. No se abrió el archivo. - + Not supported dimension B value '%1' for this pattern file. Valor de dimensión B no admitido '%1' para este archivo de patrón. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. No se pudo establecer la dimensión B. No se abrió el archivo. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. No se pudo establecer la dimensión C. Necesita un archivo con medidas multitallas. - + Couldn't set dimension C. File wasn't opened. No se pudo establecer la dimensión C. No se abrió el archivo. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images Imágenes de fondo - + Add background image Agregar imagen de fondo @@ -12734,38 +12759,38 @@ el patrón. Seleccionar imagen de fondo - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled sin título - + All files Todos los archivos - + Save Image - + Visibility group Grupo de visibilidad - + Show accuracy radius @@ -12809,7 +12834,7 @@ el patrón. No se puede continuar porque no hay impresoras disponibles en su sistema. - + unnamed sin nombre @@ -12822,7 +12847,7 @@ el patrón. El diseño no se actualizo desde la última modificación del patrón. ¿Desea continuar? - + Couldn't prepare data for creation layout No se ha podido preparar los datos para la creación del diseño @@ -12863,90 +12888,90 @@ el patrón. No se pueden introducir márgenes de impresora - - + + Can't create a path No se puede crear una ruta - + Preparing details for layout Preparando detalles para el diseño - + Pattern Patrón - + Name Nombre - + Value Valor - - - + + + Export final measurements error. Error al exportar medidas finales. - + Value in line %1 is infinite or NaN. Please, check your calculations. El valor en la línea %1 es infinito o no es un numero. Favor revise sus cálculos. - + Parser error at line %1: %2. Error en análisis en línea %1: %2. - + File error %1. Error en archivo %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Uno o mas piezas del patrón están mas grandes que el formato de papel seleccionado. Por favor, seleccione un formato de papel mas grande. - + Description Descripción - + Measurement file has unknown format. El archivo de medidas tiene un formato desconocido. - + File error. Error en archivo. - + Measurement file doesn't include all required measurements. El archivo de medidas no incluye todas las medidas requeridas. - + Please, additionally provide: %1 Por favor, adicionalmente proveer: %1 - + Timeout. Tiempo agotado. - + Process has been stoped because of exception. El proceso se ha detenido debido a una excepción. @@ -12975,7 +13000,7 @@ el patrón. MoveLabel - + move point label mover etiqueta del punto @@ -14475,14 +14500,14 @@ Esta opción surtirá efecto después de reiniciar. Cambios aplicados. - + Can't convert toUInt parameter No se puede convertir a parámetro UInt - + Can't convert toBool parameter No se puede convertir a parámetro Bool @@ -14493,7 +14518,7 @@ Esta opción surtirá efecto después de reiniciar. Parámetro vacío obtenido - + Can't convert toDouble parameter @@ -14522,22 +14547,22 @@ Esta opción surtirá efecto después de reiniciar. Material del usuario numero %1 no fue definido en este patrón. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. No se puede calcular un pique para un punto '%1' en pieza '%2'. Margen de costura esta vacío. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. No se puede calcular un pique para un punto '%1' en pieza '%2'. No se puede encontrar posición para un pique. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. No se puede calcular un pique para un punto '%1' en pieza '%2'. Imposible reparar una posición de pique. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. No se puede calcular un pique para un punto '%1' en pieza '%2'. El pique colapsó. @@ -14547,7 +14572,7 @@ Esta opción surtirá efecto después de reiniciar. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. No se puede calcular un pique para el punto '%1' en pieza '%2'. No se puede encontrar interseccion. @@ -14591,13 +14616,13 @@ Esta opción surtirá efecto después de reiniciar. Error en análisis: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. La pieza '%1' tiene un margen de costura del diseño no válida. Por favor revise el margen de costura para comprobar la forma que se comporta. - - + + Piece '%1'. Seam allowance is not valid. Pieza '%1'. El margen de costura no es válido. @@ -14607,7 +14632,7 @@ Esta opción surtirá efecto después de reiniciar. Se encontró un pique nulo par el punto '%1' en la pieza '%2'. La longitud es inferior a la mínima permitida. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. No se puede calcular un pique para un punto '%1' en pieza '%2' con margen de costura incorporada. El usuario debe proporcionar manualmente la longitud. @@ -14639,8 +14664,8 @@ Esta opción surtirá efecto después de reiniciar. No se puede calcular la longitud del pique para el punto '%1'. Razon: %2. - - + + Passmark '%1' is not part of piece '%2'. Pique '%1' no es parte de la pieza '%2'. @@ -14662,7 +14687,7 @@ Esta opción surtirá efecto después de reiniciar. Formula inválida '%1' para herramienta con id '%2'. %3. - + Can't convert toInt parameter @@ -14674,47 +14699,47 @@ Esta opción surtirá efecto después de reiniciar. Nombre de la pieza '%1' no es único. - + Could not find the segment start. No se pudo encontrar el inicio del segmento. - + Could not find the segment end. No se pudo encontrar el final del segmento. - + Segment is too short. El segmento es demasiado corto. - + Error calculating segment for curve '%1'. %2 Error calculando el segmento para la curva '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. No se puede preparar pique '%1' para la pieza '%2'. El pique de la línea base esta vacía. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -14742,39 +14767,39 @@ Esta opción surtirá efecto después de reiniciar. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. Pieza '%1'. Hilo de la tela no es valido. @@ -14802,23 +14827,18 @@ Esta opción surtirá efecto después de reiniciar. - + Cannot set printer margins No se pueden introducir márgenes de impresora - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -14866,25 +14886,25 @@ Esta opción surtirá efecto después de reiniciar. Realmente quiere borrarlo? - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -14900,13 +14920,13 @@ Esta opción surtirá efecto después de reiniciar. mover piezas valor z - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -15462,7 +15482,7 @@ Esta opción surtirá efecto después de reiniciar. - + 0 results @@ -15513,21 +15533,21 @@ Esta opción surtirá efecto después de reiniciar. - + Name measurement column Nombre - + Full name measurement column Apellido - + Group measurement column Grupo @@ -15749,7 +15769,7 @@ Esta opción surtirá efecto después de reiniciar. - + Import from CSV Importar desde CSV @@ -15759,244 +15779,244 @@ Esta opción surtirá efecto después de reiniciar. Exportar a CSV - + Show in Finder Mostrar en el Finder - + File '%1' doesn't exist! ¡El archivo '%1' no existe! - + File error. Error en archivo. - + untitled %1 sin titulo %1 - - + + untitled sin título - + read only sólo lectura - - + + Known measurements - + All files Todos los archivos - + Could not save the file No ha podido guardar el archivo - + known measurements - + Save as Guardar como - + Failed to lock. This file already opened in another window. Error al cerrar. Este archivo ya está abierto en otra ventana. - + Could not save file No se pudo guardar archivo - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Error al cerrar. Este archivo ya está abierto en otra ventana. Posibles colisiones al abrir 2 copias del programa. - + Comma-Separated Values Valores separados por coma - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt Sobre Qt - + Empty Vacío - + File was not saved yet. Aun no se guardó el archivo. - + Unsaved changes Cambios sin guardar - + Measurements have been modified. Do you want to save your changes? - + Save… Guardar… - + Save Guardar - + Don't Save No guardar - + Cannot read settings from a malformed .INI file. No se puede leer la configuración desde un archivo .INI deforme. - + Cannot save settings. Access denied. No se puede guardar configuración. Acceso denegado. - + Empty list Vacío - + Unknown measurement - + &New Window &Nueva Ventana - - + + Unnamed image %1 - + Open file Abrir archivo - + Length units - + Degrees Grados - + None Ninguno - + Measurement name is empty. - + Imported file must not contain the same name twice. Los archivos importados no deben contener el mismo nombre dos veces. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Formula - + Description measurement column Descripción - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. Las medidas individuales requiere al menos 2 columnas. @@ -16405,7 +16425,7 @@ Quieres guardar los cambios? - + Pattern unit: Unidad del patrón: @@ -16526,19 +16546,19 @@ Quieres guardar los cambios? Borrar medida - + unknown gender desconocido - + male gender hombre - + female gender mujer @@ -16846,38 +16866,38 @@ Quieres guardar los cambios? - - + + Name measurement column Nombre - - + + Full name measurement column Apellido - - + + Calculated value measurement column Valor calculado - + Formula measurement column Formula - + Base value measurement column Valor base @@ -17081,40 +17101,40 @@ Quieres guardar los cambios? Ninguno - + Invalid link - + Known measurements %1 - - + + Description measurement column Descripción - - - + + + Shift measurement column - + Empty list Vacío - - - + + + %1 shift @@ -17131,22 +17151,22 @@ Quieres guardar los cambios? - + Millimeters Milímetros - + Inches Pulgadas - + Centimeters Centímetros - + Degrees Grados @@ -17172,7 +17192,7 @@ Quieres guardar los cambios? - + 0 results @@ -18332,12 +18352,12 @@ Quieres guardar los cambios? - + None Ninguno - + Known measurements %1 @@ -18651,27 +18671,22 @@ Quieres guardar los cambios? No se puede cortar esta tira - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19605,26 +19620,26 @@ Quieres guardar los cambios? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19709,21 +19724,39 @@ Quieres guardar los cambios? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19735,12 +19768,12 @@ Quieres guardar los cambios? VCommandLine - + Path to custom measure file (export mode). Ruta al archivo de medidas personalizado (modo de exportación). - + The measure file El archivo de medidas @@ -19749,7 +19782,7 @@ Quieres guardar los cambios? Número correspondiente al formato de salida (predeterminado = 0, modo de exportación): - + Format number Formato numérico @@ -19758,18 +19791,18 @@ Quieres guardar los cambios? Número correspondiente a la plantilla de página (predeterminado = 0, modo de exportación): - - + + Template number Plantilla numérica - + The page width El ancho de página - + The measure unit La unidad de medida @@ -19782,7 +19815,7 @@ Quieres guardar los cambios? Ángulo - + Auto crop unused length (export mode). Recorte automático del largo no usado (modo de exportación). @@ -19799,7 +19832,7 @@ Quieres guardar los cambios? Unidades del diseño (como uno de papel, excepto px, modo de exportación). - + The unit La unidad @@ -19816,7 +19849,7 @@ Quieres guardar los cambios? Ancho del salto x2, medido en las unidades del diseño. (modo de exportación). - + The gap width Ancho de abertura @@ -19825,7 +19858,7 @@ Quieres guardar los cambios? Establece agrupación de diseño (modo de exportación): - + Grouping type Tipo de agrupamiento @@ -19834,7 +19867,7 @@ Quieres guardar los cambios? No se puede usar formato de pagina y tamaño/unidades de pagina explícitos en conjunto. - + Page height, width, units must be used all 3 at once. Unidades de altura y anchura de página deben usarse en los 3 a la vez. @@ -19849,7 +19882,7 @@ Quieres guardar los cambios? - + Unsupported paper units. Medidas de papel no soportadas. @@ -19859,8 +19892,8 @@ Quieres guardar los cambios? Unidades del diseño no soportadas. - - + + Export options can be used with single input file only. Las opciones de exportación solo puede usarse con un solo archivo de entrada. @@ -19869,17 +19902,17 @@ Quieres guardar los cambios? Ejecuta el programa en modo de prueba. El programa en este modo carga un solo archivo de patrón y sale silenciosamente sin mostrar la ventana principal. La clave tiene prioridad antes que la clave '%1'. - + Test option can be used with single input file only. La opción de prueba solo puede usarse con un solo archivo de entrada. - + The base filename of exported layout files. Use it to enable console export mode. El nombre base de los archivos de diseño exportados. Úselo para habilitar el modo de exportación de la consola. - + The base filename of layout files El nombre de archivo base de los archivos de diseño @@ -19888,7 +19921,7 @@ Quieres guardar los cambios? La ruta a la carpeta de destino. - + The destination folder La carpeta de destino @@ -19909,12 +19942,12 @@ Quieres guardar los cambios? El valor de la altura - + Page width in current units like 12.0 (cannot be used with "%1", export mode). El ancho de página en las unidades actuales como 12.0 (no puede usarse con "%1", modo de exportación). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). El largo de página en las unidades actuales como 12.0 (no puede usarse con "%1", modo de exportación). @@ -19945,22 +19978,22 @@ Quieres guardar los cambios? Ignorar margenes de impresión (modo de exportación) Establece todos los margenes a 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margen izquierdo de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margen derecho de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margen superior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margen inferior de página en las unidades actuales como 3.0 (modo de exportación). Si no se establece se usara el valor de una impresora predeterminada. O 0 si no se encuentra ninguna impresora. @@ -19969,32 +20002,32 @@ Quieres guardar los cambios? La longitud del desplazamiento deba usarse en conjunto con las unidades del desplazamiento. - + Gap width must be used together with shift units. El ancho del salto debe usarse en conjunto con las unidades de desplazamiento. - + Left margin must be used together with page units. El margen izquierdo debe usarse en conjunto con las unidades de página. - + Right margin must be used together with page units. El margen derecho debe usarse en conjunto con las unidades de página. - + Top margin must be used together with page units. El margen superior debe usarse en conjunto con las unidades de página. - + Bottom margin must be used together with page units. El margen inferior debe usarse en conjunto con las unidades de página. - + The path to output destination folder. By default the directory at which the application was started. La ruta a la carpeta de destino de la salida. De forma predeterminada el directorio en donde se inició la aplicación. @@ -20027,12 +20060,12 @@ Quieres guardar los cambios? Rotacion en grados (uno de los predefinidos, modo de exportación) El valor predeterminado es 180. 0 significa no rotar. Valores validos: %1. Cada valor muestra cuantas veces los detalles seran rotados. Por ejemplo 180 significar dos veces (360/180=2) por 180 grados. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Unir las páginas si es posible (modo de exportación). Valor máximo limitado por QImage que soporta solo un máximo de 32768x32768 píxeles de imagen. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Guardar el largo de la hoja si está establecido (modo de exportación). Esta opción le indica al programa que use el ancho de la hoja tanto como sea posible. La calidad del diseño puede ser peor cuando se usa esta opción. @@ -20041,17 +20074,17 @@ Quieres guardar los cambios? Longitud del desplazamiento del diseño medido en unidades del diseño (modo de exportación). La opción muestra cuantos puntos a lo largo del límite serán usados para crear un diseño. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. Ancho del salto del diseño x2, medido en las unidades del diseño. (modo de exportación). Establece la distancia entre los detalles y entre un detalle y la hoja. - + Sets layout groupping cases (export mode): %1. Establece casos de agrupación de diseño (modo de exportación): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Ejecuta el programa en modo de prueba. El programa en este modo carga un solo archivo de patrón y sale silenciosamente sin mostrar la ventana principal. La clave tiene prioridad antes que la clave '%1'. @@ -20068,7 +20101,7 @@ Quieres guardar los cambios? La longitud de compensación/desplazamiento debe usarse en conjunto con las unidades del desplazamiento. - + Number corresponding to output format (default = 0, export mode): Número correspondiente a formato de salida (predeterminado = 0, modo de exportación): @@ -20078,316 +20111,321 @@ Quieres guardar los cambios? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Deshabilitar escala de alto dpi. Llamar esta opción si tiene problemas con la escala ( predeterminado la escala esta habilitada). Alternativamente usted pude usar el %1 medio variable. - + Export dxf in binary form. Exportar dxf en forma binaria. - + Show/hide grainline when export layout. - + Export text as paths. Exportar texto como rutas. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Exportar detalles solamente. Exportar detalles como ellos fueron posicionados en el modo detalles. Cualquier diseño de opciones relacionado será ignorado. - + Export only details that match a piece name regex. Exportar solamente detalles que coincidan con una expresión regular del nombre de la pieza. - + The name regex El nombre expresión regular - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. Exportar a CSV con encabezado. Predeterminado deshabilitado. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Especificar los códec que serán usados para guardar los datos. La lista de codecs soportados son provistos por QT. El valor predeterminado dependera del sistema. En Windows, los codecs estaran basados en un sistema local. En sistemas Unix, los codec podrian caer al usar librería iconv si no se construyen códec para local que puedan ser encontrados. Valores validos para esta instalación: - + Codec name Nombre del codec - + Specify csv separator character. Default value is '%1'. Valid characters: Especificar caracter separador csv. Predeterminado este valor es '%1'. Caracteres validos: - + Separator character Carácter separador - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Llamando este comando permite exportar las medidas finales. Especifique la ruta al archivo csv con las medidas finales. La ruta debe contener el camino al directorio y el nombre del archivo. Puede ser absoluto o relativo. En caso de ser ruta relativa será usado el directorio de trabajo actual para calcular la ruta de destino. - + Path to csv file Ruta al archivo csv - + Number corresponding to layout page template (default = 0, export mode): Numero correspondiente a la plantilla de la pagina de diseño (predeterminado = 0, modo exportación): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Numero correspondiente a la plantilla de la pagina de mosaico pdf ( predeterminado = 0, modo exportacion con formato mosaico pdf): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Margen izquierdo en pagina mosaico unidades actuales igual a 3.0 (modo exportacion). Si no se establece sera usado como predeterminado el valor 1 cm. - - + + The left margin El margen izquierdo - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Margen derecho en paginas mosaico en unidades actuales igual a 3.0 (modo exportacion). Si no se establece sera usad como predeterminado el valor 1 cm. - - + + The right margin El margen derecho - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Margen superior en pagina mosaico unidades actuales igual a 3.0 (modo exportacion). Si no se establece sera usado como predeterminado el valor 1 cm. - - + + The top margin El margen superior - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Margen inferior en pagina mosaico unidades actuales igual a 3.0 (modo exportacion). Si no se establece sera usado como predeterminado el valor 1 cm. - - + + The bottom margin El margen inferior - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Ajustar la orientación de pagina mosaico a horizontal (modo exportación). El valor predeterminado si no se ajusta es vertical. - + Cannot use pageformat and page explicit size together. No puede usar el formato de pagina y pagina talla explicita al mismo tiempo. - + Tiled left margin must be used together with page units. El margen izquierdo en mosaico deberá ser usado junto con las unidades de las paginas. - + Tiled right margin must be used together with page units. El margen derecho en mosaico deberá ser usado junto con las unidades de las paginas. - + Tiled top margin must be used together with page units. El margen superior en mosaico deberá ser usado junto con las unidades de las paginas. - + Tiled bottom margin must be used together with page units. El margen inferior en mosaico deberá ser usado junto con las unidades de las paginas. - + Page measure units (export mode). Valid values: %1. Unidades de medida de paginas (modo exportación). Valores validos: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. Use esta opción para anular el material del usuario definido en el patrón. El valor deberá estar en forma <number>@<user matrial name>. El numero deberá estar en un rango desde 1 a %1. Por ejemplo, 1@Tela2. La clave puede ser usada múltiples veces. No tiene efecto en el modo interfaz grafica de usuario. - + User material Material del usuario - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. Hacer todos las advertencias de analisis en los errores. Tiene efecto solo en el modo consola. Uselo para forzar a Valentina a terminar inmediatamente si un patron contiene una advertencia de error. - + Invalid user material '%1'. Separator is missing. Material de usuario invalido '%1'. Falta el separador. - + Invalid user material '%1'. Wrong material number. Material de usuario invalido '%1'. Numero de material equivocado. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. Cambie la orientación de la plantilla de página a horizontal (modo de exportación). Esta opción solo tiene efecto para una de las plantillas de página predefinidas. - + The page height La altura de la pagina - + Order detail to follow grainline direction (export mode). Ordene el detalle para seguir la dirección del hilo de la tela (modo de exportación). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. <Time> minutos dados para que el algoritmo encuentre el mejor diseño. El tiempo debe estar en el rango de 1 minuto a 60 minutos. Valor predeterminado 1 minuto. - + Time Hora - + Coefficient Coeficiente - + Time must be in range from 1 minute to 60 minutes. El tiempo debe estar en el rango de 1 minuto a 60 minutos. - + Follow manual priority over priority by square (export mode). Siga la prioridad manual sobre la prioridad por cuadro (modo de exportación). - + Nest quantity copies of each piece (export mode). Anidar copias de cantidad de cada pieza (modo de exportación). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. Establecer coeficiente de eficiencia del diseño <coefficient>. El coeficiente de eficiencia del diseño es el radio del área ocupada por las piezas al limite rectangular de todas las piezas. Si el anidamiento alcanza el nivel requerido, el proceso se detiene. Si el valor es 0 no se realizará ninguna comprobación. El coeficiente debe estar en el rango de 0 a 100. Valor predeterminado 0. - + Coefficient must be in range from 0 to 100. El coeficiente debe estar en el rango de 0 a 100. - + Auto crop unused width (export mode). Recorte automático del ancho no usado (modo de exportación). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). Establecer factor de escala horizontal desde 0.01 hasta 3.0 (predeterminado = 1.0, modo exportación). - + Horizontal scale Escala horizontal - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). Establecer escala vertical desde 0.01 hasta 3.0 ( Predeterminado = 1.0, modo exportación). - + Vertical scale Escala vertical - + Prefer one sheet layout solution (export mode). Prefiere una solución de diseño de hoja (modo de exportación). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). Establecer base para la dimensión A en las unidades de medida multitalla (modo exportación). - + The dimension A base La dimensión base A - + Set base for dimension B in the multisize measurements units (export mode). Establecer base para la dimensión B en las unidades de medidas multitalla (modo exportación). - + The dimension B base La base de dimensión B - + Set base for dimension C in the multisize measurements units (export mode). Establecer base para la dimensión C en las unidades de medidas multitalla (modo exportación). - + The dimension C base La base de la dimensión C @@ -20412,47 +20450,47 @@ Quieres guardar los cambios? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -20462,7 +20500,7 @@ Quieres guardar los cambios? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -20792,7 +20830,7 @@ Quieres guardar los cambios? VLayoutConverter - + Could not change version. No se pudo cambiar de versión. @@ -20805,73 +20843,73 @@ Quieres guardar los cambios? - + Cannot set printer page size No se puede establecer el tamaño de página de la impresora - + Cannot set printer margins No se pueden introducir márgenes de impresora - + Can't open file '%1' No se puede abrir el archivo '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 ¡La creación del archivo '%1' falló! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files archivos (planos) - + files archivos - + Image files Archivos de imagen - + tiled mosaicos - + Numerical control Control numerico - + Raw Layout Data @@ -20884,12 +20922,12 @@ Quieres guardar los cambios? VLayoutPiece - + Piece %1 doesn't have shape. Pieza %1 no tiene forma. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21193,8 +21231,8 @@ Quieres guardar los cambios? Piezas sin colocar - - + + Pieces of Piezas de @@ -21297,12 +21335,12 @@ Quieres guardar los cambios? VPGraphicsPiece - + Move to - + Remove from Sheet Remover de la Hoja @@ -21318,37 +21356,37 @@ Quieres guardar los cambios? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -21400,7 +21438,7 @@ Quieres guardar los cambios? - + Properties Propiedades @@ -21557,9 +21595,9 @@ Quieres guardar los cambios? - - - + + + Export Exportar @@ -21609,84 +21647,84 @@ Quieres guardar los cambios? Advertencia piezas fuera de límite - + zoom zoom - - + + Scale Escala - + &Open &Abrir - + &Save &Guardar - + Save &As Guardar &Como - + &Import Raw Layout Data - + E&xit &Salida - + &New &Nuevo - + About &Qt Sobre &Qt - + About &Puzzle - + Zoom in Aumentar zoom - + Zoom out Alejar zoom - + Zoom 1:1 Zoom 1:1 - + Zoom fit best Encajar a mejor zoom - + Zoom sheet Zoom de la hoja - - + + Preferences Preferencias @@ -21707,7 +21745,7 @@ Quieres guardar los cambios? - + Could not extract data from file '%1'. %2 @@ -21730,102 +21768,102 @@ Quieres guardar los cambios? Pulgadas - + Scale: Escala: - + untitled %1.vlt - + untitled.vlt - + read only sólo lectura - + Cannot read settings from a malformed .INI file. No se puede leer la configuración desde un archivo .INI deforme. - + Cannot save settings. Access denied. No se puede guardar configuración. Acceso denegado. - - - + + + Failed to open file, is it writable? No se pudo abrir el archivo, ¿se puede escribir? - + &New Window &Nueva Ventana - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Abrir archivo - + Could not save the file No ha podido guardar el archivo - + layout - + Save as Guardar como - + Failed to lock. This file already opened in another window. Error al cerrar. Este archivo ya está abierto en otra ventana. - + Could not save file No se pudo guardar archivo - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Error al cerrar. Este archivo ya está abierto en otra ventana. Posibles colisiones al abrir 2 copias del programa. - + Raw Layout files - + About Qt Sobre Qt @@ -21862,13 +21900,13 @@ Quieres guardar los cambios? - + Horizontal: Horizontal: - + Vertical: Vertical: @@ -21951,71 +21989,76 @@ Quieres guardar los cambios? - + + Boundary together with notches + + + + Pieces gap: Hueco de piezas: - + Export Layout - + Undo commands - + Add Sheet Agregar Hoja - - + + Print Imprimir - - + + Print preview Vista previa de impresión - - + + Print tiled Imprimir en cuadrícula - - + + Print preview tiled Vista previa de impresión en cuadrícula - + Editor Editor - + Create or edit a watermark Crear o editar una marca de agua - + Edit current Editar actual - + Load Cargar - + Remove Quitar @@ -22026,13 +22069,13 @@ Quieres guardar los cambios? - + &Undo &Deshacer - + &Redo &Rehacer @@ -22043,113 +22086,113 @@ Quieres guardar los cambios? Píxeles - + Unsaved changes Cambios sin guardar - + Save… Guardar… - + Save Guardar - + Don't Save No guardar - - + + Can't create a path No se puede crear una ruta - + Can't open file '%1' No se puede abrir el archivo '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? El diseño es invalido. Superposición de piezas. ¿Quiere continuar con la exportación? - + Sheet %1 Hoja %1 - + translate pieces traducir piezas - + rotate pieces rotar piezas - - + + For printing multipages document all sheet should have the same size. Para imprimir documentos de páginas múltiples todas las hojas deben tener el mismo tamaño. - - - - - - - - + + + + + + + + Print error Error de impresión - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. No se puede continuar porque no hay impresoras disponibles en su sistema. - + Watermark files Archivos de marca de agua - - - - + + + + Unable to get sheet page settings No se puede obtener la configuración de la página hoja @@ -22159,27 +22202,27 @@ Quieres guardar los cambios? - + Z value - + Bottom - + Down - + Up - + Top @@ -22189,12 +22232,12 @@ Quieres guardar los cambios? - + sheet - + Piece %1 invalid. %2 @@ -22335,37 +22378,37 @@ Quieres guardar los cambios? Error creando o actualizando detalle - + Error creating or updating single point Error creando o actualizando punto sencillo - - + + Error creating or updating point of end line Error creando o actualizando punto de final de línea - - + + Error creating or updating point along line Error al crear o actualizar el punto largo de la línea - - + + Error creating or updating point of shoulder Error al crear o actualizar punto del hombro - - + + Error creating or updating point of normal Error al crear o actualizar punto de normal - - + + Error creating or updating point of bisector Error al crear o actualizar punto del bisector @@ -22374,128 +22417,128 @@ Quieres guardar los cambios? Error creando o actualizando punto de intersección de línea - - + + Error creating or updating point of contact Error creando o actualizando punto de contacto - + Error creating or updating modeling point Error creando o actualizando punto de modelado - + Error creating or updating height Error creando o actualizando altura - + Error creating or updating triangle Error creando o actualizando triángulo - + Error creating or updating point of intersection Error creando o actualizando punto de intersección - - + + Error creating or updating cut spline point Error creando o actualizando punto de corte de spline - - + + Error creating or updating cut spline path point Error creando o actualizando punto de corte de spline de corte - - + + Error creating or updating cut arc point Error creando o actualizando punto de corte de arco - - + + Error creating or updating point of intersection line and axis Error creando o actualizando punto de intersección de línea y eje - - + + Error creating or updating point of intersection curve and axis Error creando o actualizando punto de intersección de curva y eje - + Error creating or updating line Error creando o actualizando línea - - + + Error creating or updating simple curve Error creando o actualizando curva simple - - + + Error creating or updating curve path Error creando o actualizando trazado curvo - + Error creating or updating modeling simple curve Error al crear o actualizar el modelado de curva simple - + Error creating or updating modeling curve path Error creando o actualizando el modelado de trazado curvo - - - - + + + + Error creating or updating simple arc Error creando o actualizando arco simple - + Error creating or updating modeling arc Error al crear o actualizar arco de modelado - + Error creating or updating union details Error creando o actualizando detalle de la unión - + Error creating or updating point of intersection arcs Error creando o actualizando punto de intersección de arcos - + Error creating or updating point of intersection circles Error creando o actualizando punto de intersección de circulos - + Error creating or updating point from circle and tangent Error al crear o actualizar punto desde un círculo y tangente - + Error creating or updating point from arc and tangent Error al crear o actualizar punto desde un arco y tangente - + Error creating or updating true darts Error creando o actualizando pinzas verdaderas @@ -22512,17 +22555,17 @@ Quieres guardar los cambios? Tipo de punto desconocido '%1'. - + Unknown spline type '%1'. Tipo de spline desconocido '%1'. - + Unknown arc type '%1'. Tipo de arco desconocido '%1'. - + Unknown tools type '%1'. Tipo de herramienta desconocido '%1'. @@ -22532,75 +22575,75 @@ Quieres guardar los cambios? Error identificador no único. - + Error creating or updating point of intersection curves Error al crear o actualizar punto de curvas de intersección - + Error creating or updating simple interactive spline Error al crear o actualizar una tira interactiva simple - + Error creating or updating interactive spline path Error al crear o actualizar camino de tira interactiva - + Error creating or updating cubic bezier curve Error al crear o actualizar curva bezier cúbica - + Error creating or updating cubic bezier path curve Error al crear o actualizar camino de curva bezier cúbica - - + + Error creating or updating operation of rotation Error al crear o actualizar operación de rotación - + Unknown operation type '%1'. Tipo de operación desconocida '%1'. - + Error creating or updating operation of flipping by line Error al crear o actualizar la operación de voltear por línea - + Error creating or updating operation of flipping by axis Error al crear o actualizar la operación de voltear por eje - - + + Error creating or updating operation of moving Error al crear o actualizar la oparación de mover - + Error creating or updating point of line intersection Error al crear o actualizar intersección de punto de línea - - + + Error creating or updating simple elliptical arc Error al crear o actualizar el arco elíptico simple - + Unknown elliptical arc type '%1'. Tipo de arco elíptico '%1' desconocido. - + Error creating or updating modeling elliptical arc Error al crear o actualizar el modelado del arco elíptico @@ -22610,34 +22653,34 @@ Quieres guardar los cambios? Detalle - + Unnamed path Ruta sin nombre - - + + Error creating or updating a piece path Error creando o actualizando la ruta de la pieza - + Error creating or updating pin point Error creando o actualizando punto anclaje - + Piece path doesn't contain nodes La ruta de acceso de la pieza no contiene nodos - - + + Error creating or updating place label - + Can't find increment '%1' @@ -24416,108 +24459,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance Margen de costura actual - + move pattern piece label mover etiqueta de pieza de patrón - + resize pattern piece label redimensionar etiqueta de pieza del patrón - + rotate pattern piece label rotar etiqueta de pieza del patrón - + move pattern info label mover etiqueta de información del patrón - + resize pattern info label redimensionar etiqueta de información del patrón - + rotate pattern info label rotar etiqueta de información del patrón - + move grainline mover línea hilo de tela - + resize grainline redimensionar línea hilo de tela - + rotate grainline rotar línea hilo de tela - + Options Opciones - + In layout En diseño - + Hide main path Ocultar ruta principal - + Reset piece label template - + Delete Borrar - + apply save detail options aplicar guardar opciones de detalle - + multi deletion borrado multiple - + Forbid flipping Prohibir girar - + Force flipping Forzar voltear - + This id (%1) is not unique. Este id (%1) no es único. - + Tool was used after deleting. La herramienta se utilizo después de eliminar. diff --git a/share/translations/valentina_fi_FI.ts b/share/translations/valentina_fi_FI.ts index f6cd39537..4404eba1d 100644 --- a/share/translations/valentina_fi_FI.ts +++ b/share/translations/valentina_fi_FI.ts @@ -4339,40 +4339,40 @@ Seuraavan kaavan valintaperiaate - + Three groups: big, middle, small Kolme ryhmää: iso, keskikokoinen, pieni - + Two groups: big, small Kaksi ryhmää: iso, pieni - + Descending area Laskeva alue - - + + Millimiters Millimetriä - - + + Centimeters Senttimetriä - - + + Inches Tuumaa - + Pixels Pikseliä @@ -4382,22 +4382,22 @@ Luo sommittelu - + Auto crop unused length - + Unite pages (if possible) - + Gap width: - + Save length of the sheet @@ -4427,12 +4427,12 @@ - + Wrong fields. - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4440,32 +4440,32 @@ - + Layout options - + Rule for choosing the next workpiece - + Divide into strips - + Multiplier - + Set multiplier for length of the biggest workpiece in layout. - + Enabling for sheets that have big height will speed up creating. @@ -4475,7 +4475,7 @@ - + None Printer @@ -4506,70 +4506,85 @@ - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -7380,7 +7395,7 @@ Apply settings anyway? - + File name: @@ -7405,8 +7420,8 @@ Apply settings anyway? - - + + File base name @@ -7432,37 +7447,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins - + Right: - + Left: - + Top: - + Bottom: - + Paper format @@ -7472,20 +7492,20 @@ Apply settings anyway? - - - - + + + + cm cm - + Templates: Mallit: - + Orientation: @@ -7495,17 +7515,17 @@ Apply settings anyway? Asetukset - + Scale - + Horizontal: - + Vertical: @@ -9729,27 +9749,27 @@ Apply settings anyway? Piste - + Point along perpendicular Piste kohtisuoraa pitkin - + Perpendicular point along line Kohtisuorapiste viivaa pitkin - + Point along bisector Piste puolikasta pitkin - + Point at distance and angle Piste viivaa pitkin - + Point at distance along line Piste viivaa pitkin @@ -9762,12 +9782,12 @@ Apply settings anyway? Viiva - + Line between points Pisteiden välinen viiva - + Point at line intersection Viivojen leikkauspiste @@ -9784,7 +9804,7 @@ Apply settings anyway? Työkaluja kaarien luomiseen. - + Arc Kaari @@ -9812,210 +9832,215 @@ Apply settings anyway? &Kaavan osa - + Measurements Mitat - + Window Ikkuna - + Toolbar files Tiedostojen työkalupalkki - + ToolBar modes Moodien työkalupalkki - + Toolbar pattern Kaava työkalupalkki - + Toolbar options Asetus työkalupalkki - + Toolbar tools Työkalujen työkalupalkki - + Tool options Työkalu asetukset - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Uusi - + &New &Uusi - + Create a new pattern Luo uusi kaava - + Open Avaa - + &Open &Avaa - + Open file with pattern Avaa tiedosto kaavan kanssa - - + + Save Talenna - + &Save &Tallenna - + Save pattern Tallenna kaava - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Tallenna &nimellä... - + Save not yet saved pattern Tallenna tallentamaton kaava - + Draw Piirrä - + Details Yksityiskohdat - + Pointer tools Osointin työkalut - + New pattern piece Uusi kaavan osa - + Add new pattern piece Lisää uusi kaavan osa - + Change the label of pattern piece Muuta kaavan nimeä @@ -10028,57 +10053,57 @@ Apply settings anyway? Muuttujien taulukko - - + + History Historia - + About &Qt Tietoja &Qt - + &About Valentina &Tietoja Valentinasta - + E&xit L&opeta - + Exit the application Lopeta ohjelma - + Preferences Asetukset - + Pattern properties Kaavan asetukset - - + + Zoom in Tarkenna - + zoom in tarkenna - - - + + + Zoom out Loitonna @@ -10095,7 +10120,7 @@ Apply settings anyway? Alkuperäinen tarkennus - + Zoom fit best Tarkenna sopivasti @@ -10112,7 +10137,7 @@ Apply settings anyway? Ilmoita ohjelmistovirheestä... - + Report bug Ilmoita ohjelmistovirheestä @@ -10129,8 +10154,8 @@ Apply settings anyway? Näytä online apu - - + + Pattern piece %1 Kaavan osa %1 @@ -10223,7 +10248,7 @@ Apply settings anyway? Valitse käyrä - + About Qt Tietoja Qt:stä @@ -10263,7 +10288,7 @@ Apply settings anyway? - + Open file Avaa tiedosto @@ -10280,7 +10305,7 @@ Apply settings anyway? - + Error empty parameter. Virhe: tyhjä parametri. @@ -10296,17 +10321,17 @@ Apply settings anyway? Virhe tiedoston (std::bad_alloc) jäsennyksessä. - + Bad id. Väärä id. - + File saved Tiedosto tallennettu - + untitled.val nimetön.val @@ -10318,23 +10343,23 @@ Haluatko tallentaa muutokset? - + &Undo &Peru - + &Redo &Tee uudelleen - + Pattern piece: Kaavan osa: - + Enter a new label for the pattern piece. Syötä uusi nimi kaavan osalle. @@ -10353,8 +10378,8 @@ Haluatko tallentaa muutokset? - - + + File error. Tiedostovirhe. @@ -10363,12 +10388,12 @@ Haluatko tallentaa muutokset? Tiedosto ladattu - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina ei sulkeutunut oikein. Haluatko uudelleen avata tiedostot (%1)? - + Reopen files. Avaa uudelleen tiedosto. @@ -10381,12 +10406,12 @@ Haluatko tallentaa muutokset? Yksilölliset mitat (*.vit) - + Special point on shoulder Valitse olkapään erityispiste - + Triangle tool Kolmio työkalu @@ -10395,42 +10420,42 @@ Haluatko tallentaa muutokset? Kaaren ja viivan leikkauspiste - + Point from X and Y of two other points Piste kahdesta muusta pisteestä - + Point intersect line and axis Viivan ja akselin leikkauspiste - + Simple curve Yksinkertainen käyrä - + Curved path Mutkikas käyrä - + Segmenting a simple curve Jaa segmentteihin yksinkertainen käyrä - + Segment a curved path Jaa käyrä segmentteihin - + Point intersect curve and axis Kaaren ja akselin leikkauspiste - + Segment an arc Kaaren segmentti @@ -10443,7 +10468,7 @@ Haluatko tallentaa muutokset? Saumavara työkalu - + Union tool Unioni työkalu @@ -10452,12 +10477,12 @@ Haluatko tallentaa muutokset? työkalupalkki - + Last Tool Viimeisin työkalu - + Activate last used tool again Aktivoi viimeksi käytetty työkalu uudestaan @@ -10467,94 +10492,94 @@ Haluatko tallentaa muutokset? Valitse piste arvolle X (pystysuora) - + Mode - + Pointer - + Config pattern piece - + Layout Sommittelu - + Show Curve Details - + Show/hide control points and curve direction - + Point of intersection arcs - + Point of intersection circles - + Point from circle and tangent - + Point from arc and tangent - + Arc with given length - + Layout pages Sommittelu sivut - + Print - + Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) - + Print preview - + Print preview original layout - - + + Export original layout @@ -10584,12 +10609,12 @@ Haluatko tallentaa muutokset? - + Layout mode - + Unsaved changes @@ -10600,12 +10625,12 @@ Haluatko tallentaa muutokset? - + You can't export empty scene. - + Create new Layout @@ -10620,7 +10645,7 @@ Haluatko tallentaa muutokset? - + Measurement file has unknown format. @@ -10635,68 +10660,68 @@ Haluatko tallentaa muutokset? - + Couldn't update measurements. - - + + The measurements file '%1' could not be found. - + Loading measurements file - - - + + + The method %1 does nothing in GUI mode - - - - + + + + Export error. - + Please, provide one input file. - + Print an original layout - + Preview tiled PDF - + Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -10711,7 +10736,7 @@ Haluatko tallentaa muutokset? - + True darts @@ -10731,12 +10756,12 @@ Haluatko tallentaa muutokset? - + Don't Save - + Point intersection curves @@ -10746,7 +10771,7 @@ Haluatko tallentaa muutokset? - + Curve tool which uses point as control handle @@ -10761,24 +10786,24 @@ Haluatko tallentaa muutokset? - + Rotate objects - - - + + + Close pattern - + Midpoint between two points - + Group @@ -10795,8 +10820,8 @@ Haluatko tallentaa muutokset? - - + + Original zoom @@ -10818,22 +10843,22 @@ Haluatko tallentaa muutokset? - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line - + Flipping objects by axis - + Move objects @@ -10848,7 +10873,7 @@ Haluatko tallentaa muutokset? - + Elliptical Arc @@ -10868,89 +10893,89 @@ Haluatko tallentaa muutokset? - + read only - + Variables Table - + Contains information about increments and internal variables - + Load Individual - + Load Individual measurements file - - + + Load Multisize - + Load multisize measurements file - + Open Tape - + Edit Current - + Edit linked to the pattern measurements - + Sync - + Synchronize linked to the pattern measurements after change - + Unload Current - + Unload measurements if they were not used in a pattern file - - + + Individual measurements Yksilölliset mitat - - + + Multisize measurements @@ -10961,7 +10986,7 @@ Haluatko tallentaa muutokset? - + Pin tool @@ -10971,17 +10996,17 @@ Haluatko tallentaa muutokset? - + Insert node tool - + Open Tape app for creating or editing measurements file - + Export increments to CSV @@ -11021,143 +11046,143 @@ Haluatko tallentaa muutokset? - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool - + Duplicate detail tool @@ -11167,7 +11192,7 @@ Haluatko tallentaa muutokset? - + The measurements file '%1' could not be found or provides not enough information. @@ -11187,17 +11212,17 @@ Haluatko tallentaa muutokset? - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -11221,27 +11246,27 @@ Haluatko tallentaa muutokset? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -11252,119 +11277,119 @@ Haluatko tallentaa muutokset? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove - + Edit current - + Editor - + Create or edit a watermark @@ -11374,37 +11399,37 @@ Haluatko tallentaa muutokset? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update - + Update manual layout @@ -11430,87 +11455,87 @@ Haluatko tallentaa muutokset? - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -11595,38 +11620,38 @@ Haluatko tallentaa muutokset? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled nimetön - + All files - + Save Image - + Visibility group - + Show accuracy radius @@ -11642,12 +11667,12 @@ Haluatko tallentaa muutokset? Kriittinen virhe! - + unnamed - + Couldn't prepare data for creation layout Ei voitu luoda dataa somittelun luomiseen @@ -11656,90 +11681,90 @@ Haluatko tallentaa muutokset? Useita osia ei voitu järjestää koska ne ei mahdu paperille - - + + Can't create a path - + Preparing details for layout - + Pattern Kaava - + Name Nimi - + Value Arvo - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description Kuvaus - + Measurement file has unknown format. - + File error. Tiedostovirhe. - + Measurement file doesn't include all required measurements. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -11768,7 +11793,7 @@ Haluatko tallentaa muutokset? MoveLabel - + move point label @@ -13167,14 +13192,14 @@ This option will take an affect after restart. - + Can't convert toUInt parameter Ei voi muuntaa toUInt parametriä - + Can't convert toBool parameter Ei voi muuntaa toBool parametriä @@ -13185,7 +13210,7 @@ This option will take an affect after restart. Tyhjä parametri - + Can't convert toDouble parameter @@ -13214,22 +13239,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -13239,7 +13264,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -13283,13 +13308,13 @@ This option will take an affect after restart. Jäsentämis virhe: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -13299,7 +13324,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -13331,8 +13356,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -13354,7 +13379,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -13366,47 +13391,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -13434,39 +13459,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -13494,23 +13519,18 @@ This option will take an affect after restart. - + Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -13558,25 +13578,25 @@ This option will take an affect after restart. Haluatko todella poistaa? - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -13592,13 +13612,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -14125,7 +14145,7 @@ This option will take an affect after restart. - + 0 results @@ -14176,21 +14196,21 @@ This option will take an affect after restart. - + Name measurement column Nimi - + Full name measurement column - + Group measurement column @@ -14412,7 +14432,7 @@ This option will take an affect after restart. - + Import from CSV @@ -14422,244 +14442,244 @@ This option will take an affect after restart. - + Show in Finder - + File '%1' doesn't exist! - + File error. Tiedostovirhe. - + untitled %1 - - + + untitled nimetön - + read only - - + + Known measurements - + All files - + Could not save the file - + known measurements - + Save as Talenna nimellä - + Failed to lock. This file already opened in another window. - + Could not save file Tiedostoa ei voitu tallentaa - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt Tietoja Qt:stä - + Empty - + File was not saved yet. - + Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save Talenna - + Don't Save - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list - + Unknown measurement - + &New Window - - + + Unnamed image %1 - + Open file Avaa tiedosto - + Length units - + Degrees - + None - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Matemaattinen kaava - + Description measurement column Kuvaus - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -14982,7 +15002,7 @@ This option will take an affect after restart. - + Pattern unit: @@ -15047,19 +15067,19 @@ This option will take an affect after restart. - + unknown gender - + male gender Mies - + female gender Nainen @@ -15287,38 +15307,38 @@ This option will take an affect after restart. - - + + Name measurement column Nimi - - + + Full name measurement column - - + + Calculated value measurement column - + Formula measurement column Matemaattinen kaava - + Base value measurement column Alkuarvo @@ -15522,40 +15542,40 @@ This option will take an affect after restart. - + Invalid link - + Known measurements %1 - - + + Description measurement column Kuvaus - - - + + + Shift measurement column - + Empty list - - - + + + %1 shift @@ -15572,22 +15592,22 @@ This option will take an affect after restart. - + Millimeters - + Inches Tuumaa - + Centimeters Senttimetriä - + Degrees @@ -15613,7 +15633,7 @@ This option will take an affect after restart. - + 0 results @@ -16733,12 +16753,12 @@ This option will take an affect after restart. - + None - + Known measurements %1 @@ -17037,27 +17057,22 @@ This option will take an affect after restart. - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -17987,26 +18002,26 @@ This option will take an affect after restart. VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -18091,21 +18106,39 @@ This option will take an affect after restart. VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -18117,33 +18150,33 @@ This option will take an affect after restart. VCommandLine - + Path to custom measure file (export mode). - + The measure file - + Format number - - + + Template number - + The page width - + The measure unit @@ -18152,27 +18185,27 @@ This option will take an affect after restart. Kulma - + Auto crop unused length (export mode). - + The unit - + The gap width - + Grouping type - + Page height, width, units must be used all 3 at once. @@ -18183,7 +18216,7 @@ This option will take an affect after restart. - + Unsupported paper units. @@ -18193,38 +18226,38 @@ This option will take an affect after restart. - - + + Export options can be used with single input file only. - + Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files - + The destination folder - + Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -18239,397 +18272,402 @@ This option will take an affect after restart. Kaava tiedosto. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Gap width must be used together with shift units. - + Left margin must be used together with page units. - + Right margin must be used together with page units. - + Top margin must be used together with page units. - + Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Number corresponding to output format (default = 0, export mode): - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -18654,47 +18692,47 @@ This option will take an affect after restart. - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -18704,7 +18742,7 @@ This option will take an affect after restart. - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -19030,7 +19068,7 @@ This option will take an affect after restart. VLayoutConverter - + Could not change version. Versiota ei voitu vaihtaa. @@ -19043,73 +19081,73 @@ This option will take an affect after restart. - + Cannot set printer page size - + Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 Tiedoston '%1' luonti epäonnistui! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -19122,12 +19160,12 @@ This option will take an affect after restart. VLayoutPiece - + Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -19431,8 +19469,8 @@ This option will take an affect after restart. - - + + Pieces of @@ -19535,12 +19573,12 @@ This option will take an affect after restart. VPGraphicsPiece - + Move to - + Remove from Sheet @@ -19556,37 +19594,37 @@ This option will take an affect after restart. VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -19638,7 +19676,7 @@ This option will take an affect after restart. - + Properties @@ -19795,9 +19833,9 @@ This option will take an affect after restart. - - - + + + Export @@ -19847,84 +19885,84 @@ This option will take an affect after restart. - + zoom - - + + Scale - + &Open &Avaa - + &Save &Tallenna - + Save &As - + &Import Raw Layout Data - + E&xit L&opeta - + &New &Uusi - + About &Qt Tietoja &Qt - + About &Puzzle - + Zoom in Tarkenna - + Zoom out Loitonna - + Zoom 1:1 - + Zoom fit best Tarkenna sopivasti - + Zoom sheet - - + + Preferences Asetukset @@ -19945,7 +19983,7 @@ This option will take an affect after restart. - + Could not extract data from file '%1'. %2 @@ -19968,102 +20006,102 @@ This option will take an affect after restart. Tuumaa - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Avaa tiedosto - + Could not save the file - + layout - + Save as Talenna nimellä - + Failed to lock. This file already opened in another window. - + Could not save file Tiedostoa ei voitu tallentaa - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt Tietoja Qt:stä @@ -20100,13 +20138,13 @@ This option will take an affect after restart. - + Horizontal: - + Vertical: @@ -20189,71 +20227,76 @@ This option will take an affect after restart. - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print - - + + Print preview - - + + Print tiled - - + + Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove @@ -20264,13 +20307,13 @@ This option will take an affect after restart. - + &Undo &Peru - + &Redo &Tee uudelleen @@ -20281,113 +20324,113 @@ This option will take an affect after restart. Pikseliä - + Unsaved changes - + Save… - + Save Talenna - + Don't Save - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -20397,27 +20440,27 @@ This option will take an affect after restart. - + Z value - + Bottom - + Down - + Up - + Top @@ -20427,12 +20470,12 @@ This option will take an affect after restart. - + sheet - + Piece %1 invalid. %2 @@ -20573,37 +20616,37 @@ This option will take an affect after restart. Virhe luodessa tai päivittäessä yksityiskohtaa - + Error creating or updating single point Virhe luodessa tai päivittäessä yksi piste - - + + Error creating or updating point of end line Virhe luodessa tai päivittäessä päätepiste - - + + Error creating or updating point along line Virhe luodessa tai päivittäessä piste viivalla - - + + Error creating or updating point of shoulder Virhe luodessa tai päivittäessä olkapääpiste - - + + Error creating or updating point of normal Virhe luodessa tai päivittäessä normaalipiste - - + + Error creating or updating point of bisector Virhe luodessa tai päivittäessä jakopiste @@ -20612,128 +20655,128 @@ This option will take an affect after restart. Virhe luodessa tai päivittäessä viivojen leikkaus - - + + Error creating or updating point of contact Virhe luodessa tai päivittäessä kontaktipiste - + Error creating or updating modeling point Virhe luodessa tai päivittäessä mallinnuspiste - + Error creating or updating height Virhe luodessa tai päivittäessä pituus - + Error creating or updating triangle Virhe luodessa tai päivittäessä kolmio - + Error creating or updating point of intersection Virhe luodessa tai päivittäessä leikkauspiste - - + + Error creating or updating cut spline point Virhe luodessa tai päivittäessä leikatessa splinipiste - - + + Error creating or updating cut spline path point Virhe luodessa tai päivittäessä leikatessa polun piste - - + + Error creating or updating cut arc point Virhe luodessa tai päivittäessä kaaren leikkauspiste - - + + Error creating or updating point of intersection line and axis Virhe luodessa tai päivittäessä akselin ja viivan leikkauspiste - - + + Error creating or updating point of intersection curve and axis Virhe luodessa tai päivittäessä akselin ja käyrän leikkauspiste - + Error creating or updating line Virhe luodessa tai päivittäessä viivaa - - + + Error creating or updating simple curve Virhe luodessa tai päivittäessä yksinkertaista viivaa - - + + Error creating or updating curve path Virhe luodessa tai päivittäessä käyräpolku - + Error creating or updating modeling simple curve Virhe luodessa tai päivittäessä yksinkertaista mallinnus käyrää - + Error creating or updating modeling curve path Virhe luodessa tai päivittäessä mallinnus käyrää - - - - + + + + Error creating or updating simple arc Virhe luodessa tai päivittäessä yksinkertaista kaarta - + Error creating or updating modeling arc Virhe luodessa tai päivittäessä mallinnuskaarta - + Error creating or updating union details Virhe luodessa tai päivittäessä unioni yksityiskohtaa - + Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent - + Error creating or updating true darts @@ -20750,17 +20793,17 @@ This option will take an affect after restart. - + Unknown spline type '%1'. - + Unknown arc type '%1'. - + Unknown tools type '%1'. @@ -20770,75 +20813,75 @@ This option will take an affect after restart. - + Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline - + Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation - + Unknown operation type '%1'. - + Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving - + Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc @@ -20848,34 +20891,34 @@ This option will take an affect after restart. Yksityiskohta - + Unnamed path - - + + Error creating or updating a piece path - + Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -22523,108 +22566,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance - + move pattern piece label - + resize pattern piece label - + rotate pattern piece label - + move pattern info label - + resize pattern info label - + rotate pattern info label - + move grainline - + resize grainline - + rotate grainline - + Options Asetukset - + In layout - + Hide main path - + Reset piece label template - + Delete Poista - + apply save detail options - + multi deletion - + Forbid flipping - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_fr_FR.ts b/share/translations/valentina_fr_FR.ts index d6b442b07..72268b531 100644 --- a/share/translations/valentina_fr_FR.ts +++ b/share/translations/valentina_fr_FR.ts @@ -1291,27 +1291,27 @@ New point: - + Nouveau point : Move on top - + Déplacer tout en haut Move up - Déplacer vers le haut + Déplacer vers le haut Move down - Déplacer vers le bas + Déplacer vers le bas Move on bottom - + Déplacer tout en bas @@ -4767,40 +4767,40 @@ Règle pour choisir l'ordre des pièces - + Three groups: big, middle, small Trois groupes : grand, moyen, petit - + Two groups: big, small Deux groupes : grand, petit - + Descending area Surface décroissante - - + + Millimiters Millimètres - - + + Centimeters Centimètres - - + + Inches Pouces - + Pixels Pixels @@ -4810,22 +4810,22 @@ Créer un plan de coupe - + Auto crop unused length Rogner automatiquement la longueur non utilisée - + Unite pages (if possible) Page unique (si possible) - + Gap width: Largeur d'espacement : - + Save length of the sheet Sauvegarder la longueur de la feuille @@ -4907,7 +4907,7 @@ Personnalisé - + Wrong fields. Marges incorrectes. @@ -4920,7 +4920,7 @@ Apply settings anyway? Appliquer quand même les réglages ? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4931,7 +4931,7 @@ Appliquer quand même les réglages ? Surface décroissante = 2 - + Layout options Options du plan de coupe @@ -4940,7 +4940,7 @@ Appliquer quand même les réglages ? Longueur de décalage : - + Rule for choosing the next workpiece Règle pour choisir l'ordre des pièces @@ -4949,17 +4949,17 @@ Appliquer quand même les réglages ? Le choix d'un grand format accélère la création du plan de coupe. - + Divide into strips Diviser en bandes - + Multiplier Multiplicateur - + Set multiplier for length of the biggest workpiece in layout. Régle le multiplicateur en référence à la longueur de la plus grande pièce dans le plan de coupe. @@ -4968,7 +4968,7 @@ Appliquer quand même les réglages ? x - + Enabling for sheets that have big height will speed up creating. Le choix d'un grand format accélère la création du plan de coupe. @@ -4978,7 +4978,7 @@ Appliquer quand même les réglages ? Imprimante : - + None Printer Aucune @@ -5009,7 +5009,7 @@ Appliquer quand même les réglages ? Ignorer les marges - + Margins go beyond printing. Apply settings anyway? @@ -5018,63 +5018,78 @@ Apply settings anyway? Appliquer quand même les réglages ? - + Follow grainline Respecter le droit-fil - + Time: Temps de recherche : - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. Temps estimé pour que l’algorithme trouve la meilleure mise en page. - + Efficiency: Efficacité : - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Définir le coefficient d'efficience du plan de coupe. Ce coefficient est le rapport de la surface occupée par les pièces sur le rectangle englobant l'ensemble des pièces. Si l'imbrication atteint la valeur requise, le processus s'arrête. Si la valeur est définie à 0, aucune vérification n'est effectuée. - + Manual priority Priorité manuelle - + Nest quantity of copies according to piece settings. Edite le plan avec le nombre d'exemplaires de pièces à couper suivant la quantité configurée en mode Pièces. - + Nest quantity Quantités à éditer - + Auto crop unused width Rogner automatiquement la largeur non utilisée - + Prefer one sheet solution Préférer page unique (si possible) - + min minutes min - + Enable this option to prefer getting one sheet solutions. Cocher cette option si l'on préfère un plan sur page unique (si possible). @@ -8146,7 +8161,7 @@ Appliquer quand même les réglages ? Enregistrer le plan de coupe - + File name: Nom du fichier : @@ -8183,8 +8198,8 @@ Appliquer quand même les réglages ? Sélectionnez le dossier de destination - - + + File base name Nom du fichier de base @@ -8218,37 +8233,42 @@ Appliquer quand même les réglages ? + Boundary together with notches + + + + Not available options Indisponible - + Margins Marges - + Right: Droite : - + Left: Gauche : - + Top: Haut : - + Bottom: Bas : - + Paper format Format du plan @@ -8258,20 +8278,20 @@ Appliquer quand même les réglages ? Parcourir … - - - - + + + + cm cm - + Templates: Modèles : - + Orientation: Orientation : @@ -8281,17 +8301,17 @@ Appliquer quand même les réglages ? Options - + Scale Echelle - + Horizontal: Horizontal : - + Vertical: Vertical : @@ -9692,7 +9712,7 @@ Appliquer quand même les réglages ? New point: - + Nouveau point : @@ -9806,22 +9826,22 @@ Appliquer quand même les réglages ? Move on top - + Déplacer tout en haut Move up - Déplacer vers le haut + Déplacer vers le haut Move down - Déplacer vers le bas + Déplacer vers le bas Move on bottom - + Déplacer tout en bas @@ -10647,27 +10667,27 @@ Appliquer quand même les réglages ? Point - + Point along perpendicular Point sur perpendiculaire - + Perpendicular point along line Point perpendiculaire sur axe d'un segment - + Point along bisector Point sur bissectrice - + Point at distance and angle Point à distance et angle - + Point at distance along line Point à distance dans l'axe d'un segment @@ -10680,12 +10700,12 @@ Appliquer quand même les réglages ? Ligne - + Line between points Ligne entre 2 points - + Point at line intersection Point à l'intersection de 2 lignes @@ -10702,7 +10722,7 @@ Appliquer quand même les réglages ? Outils arcs. - + Arc Arc @@ -10730,210 +10750,215 @@ Appliquer quand même les réglages ? Élément de &patron - + Measurements Mesures - + Window Fenêtre - + Toolbar files Barre d'outil Fichier - + ToolBar modes Barre d'outils Modes - + Toolbar pattern Barre d'outil Elément de patron - + Toolbar options Barre d'outils Options - + Toolbar tools Barre d'outils Outils - + Tool options Options - + Point tools Outils Point - + Tools for creating points Des outils pour créer des points - + Selecting tools Outils de sélection - + Line tools Outils Ligne - + Tools for creating segments Des outils pour tracer des segments rectilignes - + Curve tools Outils Courbe - + Tools for creating curves Des outils pour tracer des courbes - + Operation tools Opérations - + Detail tools Mode Pièces - + Tools for creating detail Des outils pour extraire les pièces de patron - + Layout actions Outils du plan de coupe - + New Nouveau - + &New &Nouveau - + Create a new pattern Créer un nouveau fichier de patron - + Open Ouvrir - + &Open &Ouvrir - + Open file with pattern Ouvrir un fichier de patron - - + + Save Enregistrer - + &Save &Sauvegarder - + Save pattern Enregistrer le patron - + Interactive tools Mode outils interactifs - + Ctrl+D Ctrl+D - + Export font corrections Exporter les corrections de police - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Enregistrer &sous ... - + Save not yet saved pattern Enregistrer le patron non sauvegardé - + Draw Traçage - + Details Pièces - + Pointer tools Pointeur - + New pattern piece Nouvel élément de patron - + Add new pattern piece Ajouter un nouvel élément de patron - + Change the label of pattern piece Renommer l'élément de patron @@ -10946,57 +10971,57 @@ Appliquer quand même les réglages ? Tables des variables - - + + History Historique - + About &Qt À propos de &Qt - + &About Valentina À propos de &Valentina - + E&xit &Quitter - + Exit the application Quitter - + Preferences Préférences - + Pattern properties Réglages du patron - - + + Zoom in Zoom avant - + zoom in Zoom avant - - - + + + Zoom out Zoom arrière @@ -11013,7 +11038,7 @@ Appliquer quand même les réglages ? Zoom par défaut - + Zoom fit best Zoom optimal @@ -11030,7 +11055,7 @@ Appliquer quand même les réglages ? Rapporter un bug ... - + Report bug Rapporter un bug @@ -11047,8 +11072,8 @@ Appliquer quand même les réglages ? Afficher l'aide en ligne - - + + Pattern piece %1 Élément de patron %1 @@ -11141,7 +11166,7 @@ Appliquer quand même les réglages ? Sélectionner la courbe - + About Qt À propos de Qt @@ -11181,7 +11206,7 @@ Appliquer quand même les réglages ? - + Open file Ouvrir fichier @@ -11198,7 +11223,7 @@ Appliquer quand même les réglages ? - + Error empty parameter. Erreur : paramètre vide. @@ -11214,17 +11239,17 @@ Appliquer quand même les réglages ? Erreur : impossible d'analyser le fichier (std::bad_alloc). - + Bad id. Id erroné. - + File saved Fichier sauvegardé - + untitled.val sanstitre.val @@ -11235,23 +11260,23 @@ Do you want to save your changes? - + &Undo &Annuler - + &Redo &Rétablir - + Pattern piece: Élément de patron : - + Enter a new label for the pattern piece. Saisir un nouveau nom pour cet élément de patron. @@ -11270,8 +11295,8 @@ Do you want to save your changes? - - + + File error. Erreur de fichier. @@ -11280,12 +11305,12 @@ Do you want to save your changes? Fichier chargé - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina ne s'est pas fermé correctement. Voulez vous ré-ouvrir le fichier %1 qui était en cours d'utilisation ? - + Reopen files. Réouvrir. @@ -11298,12 +11323,12 @@ Do you want to save your changes? Mesures individuelles (*.vit) - + Special point on shoulder Point épaule - + Triangle tool Outil Triangle @@ -11312,42 +11337,42 @@ Do you want to save your changes? Point d'intersection d'un arc et d'un axe - + Point from X and Y of two other points Point à l'X d'un point et l'Y d'un autre - + Point intersect line and axis Point à l'intersection d'une ligne et d'un axe - + Simple curve Courbe cubique simple - + Curved path Courbe cubique complexe - + Segmenting a simple curve Segmenter une courbe simple - + Segment a curved path Segmenter une courbe complexe - + Point intersect curve and axis Point d'intersection d'une courbe et d'un axe - + Segment an arc Segmenter un arc @@ -11360,7 +11385,7 @@ Do you want to save your changes? Outil marge de couture - + Union tool Outil Fusion de pièces @@ -11369,12 +11394,12 @@ Do you want to save your changes? Barre d'outils - + Last Tool Précédent outil - + Activate last used tool again Réactiver l'outil précédent @@ -11384,33 +11409,33 @@ Do you want to save your changes? Sélectionner le point de l'axe X (vertical) - + Mode Mode - + Pointer Pointeur - + Config pattern piece Configurer l'élément de patron - + Layout Plan de coupe - + Show Curve Details Montrer les détails de la courbe - + Show/hide control points and curve direction Montrer/cacher les points de contrôle et le sens de la courbe @@ -11419,27 +11444,27 @@ Do you want to save your changes? Outils - + Point of intersection arcs Point à l'intersection de 2 arcs - + Point of intersection circles Point d'intersection de 2 cercles - + Point from circle and tangent Point à l'intersection d'un cercle et d'une tangente - + Point from arc and tangent Point à l'intersection d'un arc et d'une tangente - + Arc with given length Arc de longueur donnée @@ -11448,7 +11473,7 @@ Do you want to save your changes? Paramètres - + Layout pages Pages de plan de coupe @@ -11469,27 +11494,27 @@ Do you want to save your changes? Découpe et sauvegarde le plan de coupe en plus petites pages - + Print Imprimer - + Print tiled PDF Imprimer PDF empilé - + Split and print a layout into smaller pages (for regular printers) Découpe et imprime le plan de coupe en pages plus petites (imprimantes standard) - + Print preview Aperçu avant impression - + Print preview original layout Imprimer aperçu avant impression @@ -11498,8 +11523,8 @@ Do you want to save your changes? Exporter sous ... - - + + Export original layout Exporter le plan de coupe original @@ -11541,7 +11566,7 @@ Do you want to save your changes? - + Layout mode Mode Plan de coupe @@ -11550,7 +11575,7 @@ Do you want to save your changes? Vous ne pouvez pas utiliser le mode Plan de coupe à ce stade. Créez SVP au moins une pièce de patron en utilisant l'outil 'Extraction du contour principal' dans 'Pièce de patron' - + Unsaved changes Changements non enregistrés @@ -11589,12 +11614,12 @@ Do you want to save your changes? Mensurations multi-tailles (*.vst);;Mensurations individuelles (*.vit) - + You can't export empty scene. Impossible d'exporter, l'espace de travail est vide. - + Create new Layout Créer un nouveau plan de coupe @@ -11626,7 +11651,7 @@ Do you want to save your changes? Le fichier contient une ou des mensurations invalides (de type 'connue'). - + Measurement file has unknown format. Format de fichier de mensurations inconnu. @@ -11653,13 +11678,13 @@ Do you want to save your changes? Impossible de synchroniser les mensurations. - + Couldn't update measurements. Impossible de mettre à jour les mensurations. - - + + The measurements file '%1' could not be found. La table de mensurations '%1' est introuvable. @@ -11668,7 +11693,7 @@ Do you want to save your changes? La table de mensurations <br/><br/> <b>%1</b> <br/><br/>est introuvable depuis le chemin spécifié. Voulez-vous la rechercher depuis un autre emplacement ? - + Loading measurements file Chargement de la table de mensurations @@ -11685,9 +11710,9 @@ Do you want to save your changes? Impossible de définir une autre taille. Le fichier n'a pas été ouvert. - - - + + + The method %1 does nothing in GUI mode La méthode %1 n'a aucun effet en mode d'interface @@ -11704,45 +11729,45 @@ Do you want to save your changes? Impossible de définir une autre stature. Le fichier n'a pas été ouvert. - - - - + + + + Export error. Erreur d'exportation. - + Please, provide one input file. Merci de choisir un fichier. - + Print an original layout Imprimer le plan de coupe original - + Preview tiled PDF Aperçu avant impression du PDF empilé - + Print preview tiled layout Imprimer aperçu avant impression du PDF empilé - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Phase de traçage et construction des éléments de patron. Ces éléments constituent l'étape préalable pour passer à la suite : l'extraction et la mise en forme des pièces en &quot;mode Pièces&quot;. Avant de pouvoir passer en &quot;mode Pièces&quot;, vous devrez avoir extrait au moins un contour principal de pièce depuis le mode Traçage.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Phase de mise en forme des pièces du patron. Avant de pouvoir passer en &quot;mode Pièces&quot;, vous devrez avoir extrait au moins un contour principal depuis le &quot;mode Traçage&quot;. Les pièces mises en forme à cette étape seront ensuite intégrables au Plan de coupe. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Phase de création du plan de coupe. Cette étape n'est accessible que si vous avez créé au moins une pièce de patron en &quot;mode Pièces&quot;. Le plan de coupe peut ensuite être exporté dans le format de votre choix et sauvegardé dans votre système.</p></body></html> @@ -11765,7 +11790,7 @@ Do you want to save your changes? Impossible d'annuler le chargement des mensurations. Certaines d'entre elles sont utilisées dans le patron actuel. - + True darts Pince automatique @@ -11789,7 +11814,7 @@ Do you want to save your changes? Enregistrer ... - + Don't Save Ne pas sauvegarder @@ -11822,7 +11847,7 @@ Do you want to save your changes? Rapport de bug ... - + Point intersection curves Point d'intersection de 2 courbes @@ -11840,7 +11865,7 @@ Do you want to save your changes? Les mensurations ont été modifiées. Voulez-vous les resynchroniser maintenant ? - + Curve tool which uses point as control handle Courbe simple utilisant les points comme poignées de contrôle @@ -11875,14 +11900,14 @@ Do you want to save your changes? Sélectionner un ou plusieurs objets, puis cliquer sur <b>Entrée</b> pour confirmer la sélection - + Rotate objects Rotation des objets - - - + + + Close pattern Fermer le patron @@ -11895,12 +11920,12 @@ Do you want to save your changes? Pointeur - + Midpoint between two points Point à mi-distance entre deux points - + Group Groupe @@ -11921,8 +11946,8 @@ Do you want to save your changes? Vous ne pouvez pas utiliser le mode Plan de coupe à ce stade. Créez SVP au moins une pièce de patron en utilisant l'outil 'Extraction du contour principal' depuis le mode 'Traçage'. - - + + Original zoom Zoom par défaut @@ -11952,22 +11977,22 @@ Do you want to save your changes? Taille : - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? La table de mensurations <br/><br/> <b>%1</b> <br/><br/>est introuvable depuis le chemin spécifié. Voulez-vous la rechercher depuis un autre emplacement ? - + Flipping objects by line Miroir des objets par rapport à une ligne - + Flipping objects by axis Miroir des objets par rapport à un axe - + Move objects Déplacer des objets @@ -11986,7 +12011,7 @@ Do you want to save your changes? Mensurations synchronisées - + Elliptical Arc Arc elliptique @@ -12006,89 +12031,89 @@ Do you want to save your changes? Le fichier n'a pas pu être enregistré - + read only Lecture seule - + Variables Table Table des variables - + Contains information about increments and internal variables Contient les données des variables utilisateur et des variables internes au programme - + Load Individual Charger mensurations individuelles - + Load Individual measurements file Charger le fichier de mensurations individuelles - - + + Load Multisize Charger mensurations multi-tailles - + Load multisize measurements file Charger le fichier de mensurations multi-tailles - + Open Tape Ouvrir Tape - + Edit Current Editer les mesures en cours d'utilisation - + Edit linked to the pattern measurements Editer les mesures associées au patron - + Sync Synchroniser - + Synchronize linked to the pattern measurements after change Synchroniser les mesures utilisées dans le patron après leur modification - + Unload Current Annuler le chargement du fichier de mensurations en cours d'utilisation - + Unload measurements if they were not used in a pattern file Annuler le chargement des mensurations si elles ne sont pas utilisées dans le patron actuel - - + + Individual measurements Mensurations individuelles - - + + Multisize measurements Mensurations multi-tailles @@ -12099,7 +12124,7 @@ Do you want to save your changes? Fichiers de patron - + Pin tool Outil Epingle @@ -12109,17 +12134,17 @@ Do you want to save your changes? Sélectionner le point devant servir d'épingle - + Insert node tool Outil Insérer un noeud - + Open Tape app for creating or editing measurements file Ouvrir Tape pour créer ou éditer un fichier de mensurations - + Export increments to CSV Exporter les variables utilisateur au format CSV @@ -12159,143 +12184,143 @@ Do you want to save your changes? Vous ne pouvez pas utiliser le mode Plan de coupe à ce stade. - + Zoom fit best current Zoom optimal - + zoom fit best current pattern piece Zoom optimal sur élément de patron actif - + Export details skiping the Layout stage Exporter les pièces en passant l'étape Plan de coupe - + You don't have enough details to export. Please, include at least one detail in layout. Vous ne pouvez pas exporter, car aucune pièce n'est intégrée pour transfert dans le plan de coupe. - + Export details Exporter les pièces - + Can't export details. Impossible d'exporter les pièces. - + Label template editor Configurer le modèle d'étiquette des mentions sur les pièces - + Workpiece tool Extraction de contour principal - + Internal path tool Extraction de chemin interne - + Save &As… Enregistrer &sous … - + Report Bug… Rapport de bug … - + Export As… Exporter sous … - + Save… Enregistrer… - + Final measurements Mesures finales - + Export Final Measurements to CSV Exporter les mesures finales au format CSV - + You can't export empty scene. Please, include at least one detail in layout. Vous ne pouvez pas exporter, car aucune pièce n'est intégrée pour transfert dans le plan de coupe. - + Export final measurements error. Erreur d'exportation des mesures finales. - + Destination path is empty. Le chemin de destination est vide. - + Next pattern piece Élément de patron suivant - + Ctrl+PgDown Ctrl+PgDown - + Previous pattern piece Élément de patron précédent - + Ctrl+PgUp Ctrl+PgUp - + Tool "Select" Outil "Sélection" - + Layout settings Réglages du plan de coupe - + Layout export as Exporter le plan de coupe au format - + Place label tool Outil Placer un repère - + Duplicate detail tool Outil Duplication de pièce @@ -12305,7 +12330,7 @@ Do you want to save your changes? Sélectionner le centre du repère - + The measurements file '%1' could not be found or provides not enough information. Le fichier de mesures '%1' n'a pas été trouvé à l'emplacement spécifié ou ne contient pas toutes les informations nécessaires. @@ -12325,17 +12350,17 @@ Do you want to save your changes? Modifications appliquées. - + Cannot save settings. Access denied. Impossible d'enregistrer les réglages. Accès refusé. - + Ctrl+O Ctrl+O - + Cannot read settings from a malformed .INI file. Lecture des réglages impossible, fichier .INI invalide. @@ -12359,27 +12384,27 @@ Do you want to save your changes? Sélectionner un ou plusieurs objets en maintenant la touche <b>%1</b> enfoncée pour une sélection multiple, puis la touche <b>%2</b> pour confirmer - + Point of intersection circle and segment Point à l'intersection d'un cercle et d'un segment - + Increase label font Augmenter la taille des libellés des points - + Decrease label font Diminuer la taille des libellés des points - + Original label font Taille par défaut des libellés des points - + Hide labels Cacher les noms des points @@ -12390,119 +12415,119 @@ Do you want to save your changes? Groupes de visibilité - - + + Export recipe Exporter les étapes de traçage - + Recipe files Fichiers des étapes de traçage - + recipe historique - + Could not save recipe. %1 Impossible d'exporter l'historique. %1 - + Curved path tool which uses point as control handle Courbe complexe utilisant les points comme poignées de contrôle - + Point of intersection arc and axis Point d'intersection d'un arc et d'un axe - + Show main path Afficher le contour principal - + Globally show pieces main path Afficher le contour principal - - + + Pattern messages Messages d'avertissement - + Clear all messages Supprimer tous les messages - + Filter Filtre - + DEBUG DEBUGAGE - + WARNING AVERTISSEMENT - + CRITICAL CRITIQUE - + FATAL FATALE - + INFO INFO - + Auto refresh the list with each parse Rafraîchir automatiquement la liste à chaque analyse - + Watermark Filigrane - + Load Charger - + Remove Retirer - + Edit current Editer le filigrane en cours d'utilisation - + Editor Editeur - + Create or edit a watermark Créer ou éditer un filigrane @@ -12512,37 +12537,37 @@ Do you want to save your changes? Fichiers des filigranes - + Manual Layout Plan de coupe manuel - + Open Puzzle Ouvrir Puzzle - + Open the Puzzle app Ouvrir Puzzle - + Create Créer - + Create manual layout Créer un plan de coupe manuel - + Update Mise à jour - + Update manual layout Mettre à jour le plan de coupe manuel @@ -12568,87 +12593,87 @@ Do you want to save your changes? Sélectionner un dossier - + The pattern has been modified. Do you want to save your changes? Le patron a été modifié. Voulez-vous sauvegarder les modifications apportées ? - + Not supported dimension A value '%1' for this pattern file. Valeur '%1' de dimension A non prise en charge pour ce patron. - + Couldn't set dimension A. Need a file with multisize measurements. Impossible de définir la dimension A. Un tableau de mensurations multi-tailles est nécessaire. - + Couldn't set dimension A. File wasn't opened. Impossible de définir la dimension A. Le fichier n'a pas été ouvert. - + Not supported dimension B value '%1' for this pattern file. Valeur '%1' de dimension B non prise en charge pour ce patron. - + Couldn't set dimension B. Need a file with multisize measurements. Impossible de définir la dimension B. Un tableau de mensurations multi-tailles est nécessaire. - + Couldn't set dimension B. File wasn't opened. Impossible de définir la dimension B. Le fichier n'a pas été ouvert. - + Not supported dimension C value '%1' for this pattern file. Valeur '%1' de dimension C non prise en charge pour ce patron. - + Couldn't set dimension C. Need a file with multisize measurements. Impossible de définir la dimension C. Un tableau de mensurations multi-tailles est nécessaire. - + Couldn't set dimension C. File wasn't opened. Impossible de définir la dimension C. Le fichier n'a pas été ouvert. - + Could not create recipe file. %1 Impossible de créer le fichier d'historique. %1 - + Shop E-Boutique - + Scalable Vector Graphics files Fichiers SVG - + Save draw Enregistrer le dessin - + Draw export Export svg depuis mode Traçage - + Background images Images en arrière-plan - + Add background image Ajouter une image en arrière-plan @@ -12733,38 +12758,38 @@ Do you want to save your changes? Sélection de l'image - - + + Unable to save image. Error: %1 Impossible d'enregistrer l'image. Erreur : %1 - + Unable to save image. No data. Impossible d'enregistrer l'image. Aucune donnée. - + untitled sans nom - + All files Tous les fichiers - + Save Image Enregistrer l'image - + Visibility group Groupe de visibilité - + Show accuracy radius Afficher le guide de précision @@ -12808,7 +12833,7 @@ Do you want to save your changes? Impossible de poursuivre, aucune imprimante système détectée. - + unnamed Sans nom @@ -12821,7 +12846,7 @@ Do you want to save your changes? Le plan de coupe n'a pas été mis à jour depuis la dernière modification du patron. Voulez-vous poursuivre quand même ? - + Couldn't prepare data for creation layout La préparation des données pour la création du plan de coupe a échoué @@ -12862,90 +12887,90 @@ Do you want to save your changes? Impossible de définir les marges d'impression de l'imprimante - - + + Can't create a path Impossible de créer l'emplacement - + Preparing details for layout Préparation des pièces pour l'édition du plan de coupe - + Pattern Patron - + Name Nom - + Value Valeur - - - + + + Export final measurements error. Erreur d'exportation des mesures finales. - + Value in line %1 is infinite or NaN. Please, check your calculations. Résultat invalide. La valeur %1 est infinie ou n'est pas une valeur numérique. Veuillez vérifier vos calculs. - + Parser error at line %1: %2. Erreur d'analyse à la ligne %1: %2. - + File error %1. Erreur de fichier %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Une ou plusieurs pièces sont plus grandes que le format de plan sélectionné. Merci de choisir un format plus grand. - + Description Description - + Measurement file has unknown format. La table de mensurations est de format inconnu. - + File error. Erreur de fichier. - + Measurement file doesn't include all required measurements. Des mensurations requises manquent dans la table de mesures que vous voulez charger. - + Please, additionally provide: %1 Merci de spécifier aussi: %1 - + Timeout. Délai. - + Process has been stoped because of exception. Le processus a été stoppé par une exception survenue en cours d'exécution. @@ -12974,7 +12999,7 @@ Do you want to save your changes? MoveLabel - + move point label Déplacer le libellé du point @@ -14472,14 +14497,14 @@ This option will take an affect after restart. Modifications appliquées. - + Can't convert toUInt parameter Impossible de convertir vers un paramètre de type entier - + Can't convert toBool parameter Impossible de convertir vers un paramètre de type Booléen @@ -14490,7 +14515,7 @@ This option will take an affect after restart. Paramètre vide - + Can't convert toDouble parameter @@ -14519,22 +14544,22 @@ This option will take an affect after restart. La matière numéro %1 n'a pas été définie dans ce patron. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Impossible de calculer un cran d'assemblage pour le point '%1' dans la pièce '%2'. La marge de couture n'est pas renseignée. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. Impossible de calculer un cran d'assemblage pour le point '%1' dans la pièce '%2'. Impossible de déterminer la position du cran. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. Impossible de calculer un cran d'assemblage pour le point '%1' dans la pièce '%2'. Impossible de corriger la position du cran. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. Impossible de calculer un cran d'assemblage pour le point '%1' dans la pièce '%2'. Disparition du cran. @@ -14544,7 +14569,7 @@ This option will take an affect after restart. Erreur pour le cran au point '%1' de la pièce '%2'. Son épaisseur est inférieure à la largeur minimale autorisée. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. Impossible de calculer un cran d'assemblage pour le point '%1' dans la pièce '%2'. Impossible de trouver une intersection. @@ -14588,13 +14613,13 @@ This option will take an affect after restart. Erreur d'analyse : %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. La pièce '%1' a une valeur de marge invalide dans le plan de coupe. Merci de vérifier la marge de couture pour vérifier son comportement. - - + + Piece '%1'. Seam allowance is not valid. Pièce '%1'. La marge de couture est invalide. @@ -14604,7 +14629,7 @@ This option will take an affect after restart. Cran d'assemblage nul pour le point '%1' dans la pièce '%2'. La longueur est inférieure à la longueur minimale autorisée. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. Impossible de calculer un cran d'assemblage pour le point '%1' dans la pièce '%2' avec la marge de couture intégrée. Merci de saisir une longueur manuelle. @@ -14636,8 +14661,8 @@ This option will take an affect after restart. Impossible de calculer une longueur de cran d'assemblage pour le point '%1'. Raison : %2. - - + + Passmark '%1' is not part of piece '%2'. Le cran d'assemblage '%1' ne fait pas partie de la pièce '%2'. @@ -14659,7 +14684,7 @@ This option will take an affect after restart. Formule invalide '%1' pour cet outil avec l'identifiant '%2'. %3. - + Can't convert toInt parameter @@ -14671,47 +14696,47 @@ This option will take an affect after restart. La pièce nommée '%1' n'est pas unique. - + Could not find the segment start. Impossible de trouver le début du segment. - + Could not find the segment end. Impossible de trouver la fin du segment. - + Segment is too short. Le segment est trop court. - + Error calculating segment for curve '%1'. %2 Erreur de calcul du segment pour la courbe '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 Erreur dans le chemin '%1'. Le calcul du segment pour la courbe '%2' a échoué. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. Impossible de configurer le cran d'assemblage '%1' dans la pièce '%2'. Le cran d'assemblage est absent. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. Impossible de configurer le cran d'assemblage '%1' dans la pièce '%2'. La ligne de base du cran d'assemblage est absente. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. Impossible de configurer le cran d'assemblage '%1' dans la pièce '%2'. La ligne de base du cran d'assemblage est absente. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. Impossible de configurer le cran d'assemblage '%1' dans la pièce '%2'. Le cran d'assemblage est absent. @@ -14739,32 +14764,32 @@ This option will take an affect after restart. Impossible de préparer l'emplacement réservé à la surface de la ligne de couture de la pièce. %1. - + No data for the height dimension. Absence de données pour la dimension stature. - + No data for the size dimension. Absence de données pour la dimension taille commerciale. - + No data for the hip dimension. Absence de données pour la dimension tour de hanches. - + No data for the waist dimension. Absence de données pour la dimension tour de taille. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 @@ -14773,7 +14798,7 @@ This option will take an affect after restart. %3 - + Piece '%1'. Grainline is not valid. Piece '%1'. Droit fil non valide. @@ -14801,23 +14826,22 @@ This option will take an affect after restart. - + Cannot set printer margins Impossible de définir les marges d'impression de l'imprimante - Unable to cut curve '%1'. The curve is too short. - Impossible de segmenter la courbe '%1'. La longueur de la courbe est insuffisante. + Impossible de segmenter la courbe '%1'. La longueur de la courbe est insuffisante. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Courbe '%1'. Valeur de segmentation de la courbe insuffisante. Paramétrez une valeur au moins égale au minimum requis. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Courbe '%1'. Valeur de segmentation de la courbe trop élevée. Paramétrez une valeur au plus égale au maximum possible. @@ -14865,25 +14889,25 @@ This option will take an affect after restart. Voulez vous vraiment supprimer? - + No data for the X dimension. Pas de données pour la dimension X. - + No data for the Y dimension. Pas de données pour la dimension Y. - + No data for the Z dimension. Pas de données pour la dimension Z. - + No data for the W dimension. Pas de données pour la dimension W. @@ -14899,13 +14923,13 @@ This option will take an affect after restart. Valeur de déplacement Z de la pièce (vers avant ou arrière-plan) - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Courbe '%1'. La partie segmentée (%2) est de longueur insuffisante. Paramétrez une valeur au moins égale au minimum requis. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Courbe '%1'. La partie segmentée (%2) est de longueur trop élevée. Paramétrez une valeur au plus égale au maximum possible. @@ -15461,7 +15485,7 @@ This option will take an affect after restart. - + 0 results 0 résultat trouvé @@ -15512,21 +15536,21 @@ This option will take an affect after restart. - + Name measurement column Nom - + Full name measurement column Nom complet - + Group measurement column Groupe @@ -15748,7 +15772,7 @@ This option will take an affect after restart. - + Import from CSV Importer d'un fichier .csv @@ -15758,244 +15782,244 @@ This option will take an affect after restart. Exporter sous format .csv - + Show in Finder Afficher dans le dossier - + File '%1' doesn't exist! Le fichier '%1' n'existe pas ! - + File error. Erreur de fichier. - + untitled %1 sans nom %1 - - + + untitled sans nom - + read only lecture seule - - + + Known measurements Mesures connues - + All files Tous les fichiers - + Could not save the file Le fichier n'a pas pu être enregistré - + known measurements mesures connues - + Save as Enregistrer sous - + Failed to lock. This file already opened in another window. Verrouillage impossible. Le fichier est déjà ouvert dans une autre fenêtre. - + Could not save file Impossible d'enregistrer le fichier - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Verrouillage impossible car le fichier est déjà ouvert dans une autre fenêtre. Ceci se produit généralement quand 2 copies du programme sont ouvertes en même temps. - + Comma-Separated Values Tableur format texte - + Measurement image Image de la mesure - + Invalid image. Error: %1 Image non valide. Erreur : %1 - - + + Unable to save image. Error: %1 Impossible d'enregistrer l'image. Erreur : %1 - + Save Image Enregistrer l'image - + Unable to show image. Error: %1 Impossible d'afficher l'image. Erreur : %1 - + About Qt À propos de Qt - + Empty Vide - + File was not saved yet. Le fichier n'a pas encore été sauvegardé. - + Unsaved changes Modifications non enregistrées - + Measurements have been modified. Do you want to save your changes? Les mesures ont été modifiées. Voulez-vous sauvegarder les modifications que vous avez apportées ? - + Save… Enregistrer … - + Save Enregistrer - + Don't Save Ne pas sauvegarder - + Cannot read settings from a malformed .INI file. Lecture des réglages impossible, fichier .INI invalide. - + Cannot save settings. Access denied. Impossible d'enregistrer les réglages. Accès refusé. - + Empty list Vide - + Unknown measurement Mesure de type personnalisé - + &New Window &Nouvelle Fenêtre - - + + Unnamed image %1 Image sans nom %1 - + Open file Ouvrir le fichier - + Length units Unités de longueur - + Degrees Degrés - + None Aucun - + Measurement name is empty. Le champ 'nom de la mesure' n'est pas renseigné. - + Imported file must not contain the same name twice. Le fichier importé ne doit pas contenir deux fois le même nom. - + Measurement '%1' doesn't match regex pattern. La mesure '%1' ne correspond pas au système de codage de caractères. - + Measurement '%1' already used in the file. La mesure '%1' est déjà utilisée dans le fichier. - + Formula measurement column Formule - + Description measurement column Description - + Error in row %1. The measurement name is empty. Erreur dans la ligne %1. Le nom de la mesure n'est pas renseigné. - + Error in row %1. %2 Erreur à la ligne %1. %2 - + Individual measurements require at least 2 columns. 2 colonnes minimum doivent être remplies en mesures individuelles. @@ -16404,7 +16428,7 @@ Voulez-vous enregistrer vos changements ? - + Pattern unit: Unité du patron: @@ -16525,19 +16549,19 @@ Voulez-vous enregistrer vos changements ? Supprimer la mesure - + unknown gender inconnu - + male gender homme - + female gender femme @@ -16845,38 +16869,38 @@ Voulez-vous enregistrer vos changements ? - - + + Name measurement column Nom - - + + Full name measurement column Nom complet - - + + Calculated value measurement column Valeur calculée - + Formula measurement column Formule - + Base value measurement column Valeur de base @@ -17080,40 +17104,40 @@ Voulez-vous enregistrer vos changements ? Aucun - + Invalid link Lien invalide - + Known measurements %1 Mesures connues %1 - - + + Description measurement column Description - - - + + + Shift measurement column Intervalle - + Empty list Vide - - - + + + %1 shift %1 intervalle @@ -17130,22 +17154,22 @@ Voulez-vous enregistrer vos changements ? Impossible de convertir la valeur d'intervalle en double à la colonne %1. - + Millimeters Millimètres - + Inches Pouces - + Centimeters Centimètres - + Degrees Degrés @@ -17171,7 +17195,7 @@ Voulez-vous enregistrer vos changements ? - + 0 results 0 résultat trouvé @@ -18331,12 +18355,12 @@ Voulez-vous enregistrer vos changements ? Clair - + None Aucun - + Known measurements %1 Mesures connues %1 @@ -18650,27 +18674,26 @@ Voulez-vous enregistrer vos changements ? Impossible de segmenter la courbe - Unable to cut curve '%1'. The curve is too short. - Impossible de segmenter la courbe '%1'. La longueur de la courbe est insuffisante. + Impossible de segmenter la courbe '%1'. La longueur de la courbe est insuffisante. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Courbe '%1'. La partie segmentée (%2) est de longueur insuffisante. Paramétrez une valeur au moins égale au minimum requis. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Courbe '%1'. Valeur de segmentation de la courbe insuffisante. Paramétrez une valeur au moins égale au minimum requis. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Courbe '%1'. La partie segmentée (%2) est de longueur trop élevée. Paramétrez une valeur au plus égale au maximum possible. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Courbe '%1'. Valeur de segmentation de la courbe trop élevée. Paramétrez une valeur au plus égale au maximum possible. @@ -19604,26 +19627,26 @@ Voulez-vous enregistrer vos changements ? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Courbe '%1'. La partie segmentée (%2) est de longueur insuffisante. Paramétrez une valeur au moins égale au minimum requis. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Courbe '%1'. Valeur de segmentation de la courbe insuffisante. Paramétrez une valeur au moins égale au minimum requis. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Courbe '%1'. La partie segmentée (%2) est de longueur trop élevée. Paramétrez une valeur au plus égale au maximum possible. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Courbe '%1'. Valeur de segmentation de la courbe trop élevée. Paramétrez une valeur au plus égale au maximum possible. @@ -19708,21 +19731,39 @@ Voulez-vous enregistrer vos changements ? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 Erreur rencontrée lors de la préparation des données pour l'édition du plan de coupe : la taille de la pièce '%1' est <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 Erreur rencontrée lors de la préparation des données pour l'édition du plan de coupe : la taille de la feuille est <= 0 - + Error of preparing data for layout: List of details is empty Erreur rencontrée lors de la préparation des données pour l'édition du plan de coupe : la liste des pièces à intégrer est vide + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19734,12 +19775,12 @@ Voulez-vous enregistrer vos changements ? VCommandLine - + Path to custom measure file (export mode). Chemin d'accès au fichier de mesures personnalisées (mode export). - + The measure file Le fichier de mesures @@ -19748,7 +19789,7 @@ Voulez-vous enregistrer vos changements ? Numéro correspondant au format de sortie (défaut=0, mode export): - + Format number Numéro de format @@ -19757,18 +19798,18 @@ Voulez-vous enregistrer vos changements ? Numéro correspondant au modèle de page (par défaut = 0, mode export) : - - + + Template number Numéro de modèle - + The page width La largeur de page - + The measure unit L'unité de mesure @@ -19781,7 +19822,7 @@ Voulez-vous enregistrer vos changements ? Angle - + Auto crop unused length (export mode). Rogner automatiquement la longueur non utilisée (mode export). @@ -19798,7 +19839,7 @@ Voulez-vous enregistrer vos changements ? Dimensions du plan de coupe (égales à celles du papier hors px, mode export). - + The unit L'unité @@ -19815,7 +19856,7 @@ Voulez-vous enregistrer vos changements ? Largeur d'espacement x2, en unités du plan de coupe. (mode export). - + The gap width Largeur d'espacement @@ -19824,7 +19865,7 @@ Voulez-vous enregistrer vos changements ? Régles de groupement des pièces dans le plan de coupe (mode export): - + Grouping type Type de groupes @@ -19833,7 +19874,7 @@ Voulez-vous enregistrer vos changements ? Impossible d'utiliser les fonctions format de page et taille/unités spécifique de page ensemble. - + Page height, width, units must be used all 3 at once. Hauteur, largeur de page et unités doivent être utilisés tous les 3 simultanément. @@ -19848,7 +19889,7 @@ Voulez-vous enregistrer vos changements ? - + Unsupported paper units. Unités de dimension du papier non prises en charge. @@ -19858,8 +19899,8 @@ Voulez-vous enregistrer vos changements ? Unités de dimension du plan de coupe non prises en charge. - - + + Export options can be used with single input file only. Les options en mode export ne peuvent être utilisées qu'avec un fichier d'entrée unique. @@ -19868,17 +19909,17 @@ Voulez-vous enregistrer vos changements ? Lance le logiciel en mode test. Dans ce mode, le logiciel charge un fichier de patron simple puis quitte sans afficher la fenêtre principale. La clé a priorité sur la clé '%1'. - + Test option can be used with single input file only. Les options en mode test ne peuvent être utilisées qu'avec un fichier d'entrée unique. - + The base filename of exported layout files. Use it to enable console export mode. Nom de base d'export du fichier de plan de coupe. À n'utiliser que dans le cas d'un mode export console. - + The base filename of layout files Le nom de base de fichier du plan de coupe @@ -19887,7 +19928,7 @@ Voulez-vous enregistrer vos changements ? Emplacement du dossier de destination. - + The destination folder Le dossier de destination @@ -19908,12 +19949,12 @@ Voulez-vous enregistrer vos changements ? Valeur de stature - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Hauteur de page en unité courante, par ex. 12.0 (ne peut pas être utilisé avec "%1", mode export). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Hauteur de page en unité courante, par ex. 12.0 (ne peut pas être utilisé avec "%1", mode export). @@ -19944,22 +19985,22 @@ Voulez-vous enregistrer vos changements ? Ignorer les marges d'impression (mode export). Règle les marge à 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Marge gauche de la page en unité courante, ex. 3.0 (mode export). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvée. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Marge droite de la page en unité courante, ex. 3.0 (mode export). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvée. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Marge du haut de la page en unité courante, ex. 3.0 (mode export). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvée. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Marge du bas de la page en unité courante, ex. 3.0 (mode export). Si non renseigné, la valeur par défaut de l'imprimante sera utilisé. Ou 0 si aucune imprimante n'a été trouvée. @@ -19968,32 +20009,32 @@ Voulez-vous enregistrer vos changements ? La longueur de décalage doit être spécifiée dans l'unité de décalage. - + Gap width must be used together with shift units. La largeur d'espacement doit être utilisée dans l'unité d'espacement. - + Left margin must be used together with page units. La marge gauche doit être spécifiée dans l'unité de la page. - + Right margin must be used together with page units. La marge droite doit être spécifiée dans l'unité de la page. - + Top margin must be used together with page units. La marge du haut doit être spécifiée dans l'unité de la page. - + Bottom margin must be used together with page units. La marge du bas doit être spécifiée dans l'unité de la page. - + The path to output destination folder. By default the directory at which the application was started. Emplacement du dossier de destination. Par défaut, le répertoire est celui sous lequel le programme a été lancé. @@ -20026,12 +20067,12 @@ Voulez-vous enregistrer vos changements ? Rotation en degrés (prédéfini en mode export). La valeur par défaut est de 180 degrés. 0 degré si aucune rotation. Valeurs possibles : %1. Chaque valeur indique combien de fois la pièce de patron fera l'objet d'une rotation. Par exemple, 180 signifie 2 rotations (360/180=2) de 180 degrés. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Page unique si possible (mode export). La valeur maximale correspond aux limtes de QImage qui prend en charge 32768x32768 px au maximum. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Sauvegarder la longueur de la feuille si réglée (mode export). Cette option demande au logiciel d'utiliser la feuille au maximum en largeur. La qualité du plan de coupe peut être moindre si cette option est choisie. @@ -20040,17 +20081,17 @@ Voulez-vous enregistrer vos changements ? Décalage mesuré en fonction des dimensions du plan de coupe (mode export). Cette option affiche le nombre de points, le long d'une arête, qui seront utilisés pour créer le plan de coupe. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. La largeur d'espacement entre pièces x2, mesurée en fonction des dimensions du plan de coupe (mode export). Réglage de la distance entre les pièces de patron, ainsi qu'une pièce de patron et le bord de la feuille. - + Sets layout groupping cases (export mode): %1. Règles de groupement des pièces dans le plan de coupe (mode export): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Lance le logiciel en mode test. Dans ce mode, le logiciel charge un fichier de patron simple puis quitte sans afficher la fenêtre principale. La clé a priorité sur la clé '%1'. @@ -20067,7 +20108,7 @@ Voulez-vous enregistrer vos changements ? La longueur de décalage doit être spécifiée dans l'unité de décalage. - + Number corresponding to output format (default = 0, export mode): Numéro correspondant au format de sortie (défaut=0, mode export) : @@ -20077,316 +20118,321 @@ Voulez-vous enregistrer vos changements ? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Désactiver la mise à l'échelle high dpi. Choisissez cette option si vous avez un problème avec la mise à l'échelle (activée par défaut). Sinon vous pouvez aussi utiliser la variable d’environnement %1. - + Export dxf in binary form. Export du fichier dxf au format binaire. - + Show/hide grainline when export layout. Afficher ou cacher le droit-fil à l'export du plan de coupe. - + Export text as paths. Exporter les textes en chemins. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Export des pièces uniquement, positionnées comme elles le sont en mode Pièces. Ne tient pas compte des options du plan de coupe. - + Export only details that match a piece name regex. Exporter uniquement les pièces dont le nom correspond à une expression régulière de nom de pièce. - + The name regex Expression régulière du nom - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. Export en csv avec en-tête. Désactivé par défaut. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Spécifier le codec qui sera utilisé pour enregistrer les données. La liste des codecs supportés est fournie par Qt. Les valeurs par défaut dépendent du système. Sur Windows, le codec est basé sur une locale système. Sur les systèmes Unix, le codec peut se rabattre sur l'utilisation d'une bibliothèque iconv, si aucun codec intégré pour la locale n'est trouvé. Valeurs valides pour cette version : - + Codec name Nom du codec - + Specify csv separator character. Default value is '%1'. Valid characters: Spécifier le caractère séparateur du fichier csv. Par défaut la valeur est '%1'. Caractères valides : - + Separator character Caractère séparateur - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Cette commande permet d'exporter les mesures finales. Indiquez un chemin d'accès pour le fichier CSV contenant les mesures à exporter. Ce chemin doit spécifier le dossier dans lequel le fichier sera enregistré, ainsi que le nom du fichier. Il peut être absolu ou relatif. Le chemin relatif pointera vers le dossier dans lequel votre patron actuel est enregistré. - + Path to csv file Chemin d'accès au fichier csv - + Number corresponding to layout page template (default = 0, export mode): Numéro correspondant au modèle de page du plan de coupe (défaut=0, mode export) : - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Numéro caractérisant le mode de page pdf empilé (par défaut = 0, mode export au format pdf empilé) : - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Marge gauche de la page empilée en unité courante sous la forme '3.0' (mode export). Si non spécifiée, la valeur de 1 cm sera utilisée par défaut. - - + + The left margin La marge de gauche - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Marge droite de la page empilée en unité courante sous la forme '3.0' (mode export). Si non spécifiée, la valeur de 1 cm sera utilisée par défaut. - - + + The right margin La marge de droite - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Marge haut de la page empilée en unité courante sous la forme '3.0' (mode export). Si non spécifiée, la valeur de 1 cm sera utilisée par défaut. - - + + The top margin La marge du haut - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Marge bas de la page empilée en unité courante sous la forme '3.0' (mode export). Si non spécifiée, la valeur de 1 cm sera utilisée par défaut. - - + + The bottom margin La marge du bas - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Définir l'orientation de la page en mode empilé, au format paysage (mode export). Format portrait par défaut si orientation non configurée. - + Cannot use pageformat and page explicit size together. Impossible d'utiliser les fonctions format de page et taille spécifique de page ensemble. - + Tiled left margin must be used together with page units. La marge gauche en empilement doit être spécifiée dans la même unité que celle de la page. - + Tiled right margin must be used together with page units. La marge droite en empilement doit être spécifiée dans la même unité que celle de la page. - + Tiled top margin must be used together with page units. La marge haut en empilement doit être spécifiée dans la même unité que celle de la page. - + Tiled bottom margin must be used together with page units. La marge bas en empilement doit être spécifiée dans la même unité que celle de la page. - + Page measure units (export mode). Valid values: %1. Unités de mesure de la page (mode export). Valeurs valides : %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. Utiliser cette option pour outrepasser la matière du patron définie par l'utilisateur . La valeur doit être de la forme <number>@<user matrial name>. Le nombre doit être compris entre 1 et %1. Par exemple, 1@Fabric2. La clé peut être utilisée plusieurs fois. N'a pas d'effet en mode GUI. - + User material Tissu utilisé - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. Prend toutes les alertes d'analyses en tant qu'erreurs. N'a un effet qu'en mode console. Utilisé pour forcer Valentina à s'arrêter immédiatement si un patron contient des erreurs d'analyse. - + Invalid user material '%1'. Separator is missing. Le tissu '%1' utilisé est invalide : séparateur manquant. - + Invalid user material '%1'. Wrong material number. Le tissu '%1' utilisé est invalide : numéro de tissu erroné. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. Passer le modèle de page en mode paysage (mode export). Ce réglage n'aura d'effet que pour l'un des modèles pré-définis. - + The page height La hauteur de page - + Order detail to follow grainline direction (export mode). Tenir compte de la direction du droit-fil dans le placement des pièces (mode export). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. <Time> en minutes données à l'algorithme pour trouver le meilleur plan de coupe. La durée doit être comprise entre 1 et 60 minutes. Valeur par défaut 1 minute. - + Time Durée - + Coefficient Coefficient - + Time must be in range from 1 minute to 60 minutes. Le temps indiqué doit être compris entre 1 et 60 minutes. - + Follow manual priority over priority by square (export mode). Privilégier la priorité manuelle (mode export). - + Nest quantity copies of each piece (export mode). Editer le plan avec le nombre d'exemplaires de pièces à couper suivant la quantité configurée en mode Pièces. (mode export). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. Configurez le coefficient d'efficacité du plan de coupe <coefficient>.Ce coefficient constitue le ratio de l'espace occupé par les pièces par rapport au rectangle englobant toutes les pièces. Quand le ratio configuré est atteint, la création est automatiquement validée même si la durée minimale de création configurée n'est pas écoulée. Si le ratio est configuré à 0, le programme ne cherchera pas à disposer les pièces en fonction de ce critère. Le coefficient doit être compris entre 0 et 100. Valeur par défaut 0. - + Coefficient must be in range from 0 to 100. Le coefficient doit être compris entre 0 et 100. - + Auto crop unused width (export mode). Rogner automatiquement la largeur non utilisée (mode export). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). Configurer l'échelle horizontale de 0.01 à 3.0 (par défaut = 1.0, mode export). - + Horizontal scale Echelle horizontale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). Configurer l'échelle verticale de 0.01 à 3.0 (par défaut = 1.0, mode export). - + Vertical scale Echelle verticale - + Prefer one sheet layout solution (export mode). Préférer le plan de coupe sur une seule feuille (mode export). - + Invalid dimension A value. Valeur de la dimension A non valide. - + Invalid dimension B value. Valeur de la dimension B non valide. - + Invalid dimension C value. Valeur de la dimension C non valide. - + Set base for dimension A in the multisize measurements units (export mode). Configurer la valeur de base de la dimention A dans l'unité des mensurations multi-tailles (mode export). - + The dimension A base Valeur de base pour la dimension A - + Set base for dimension B in the multisize measurements units (export mode). Configurer la valeur de base de la dimention B dans l'unité des mensurations multi-tailles (mode export). - + The dimension B base Valeur de base pour la dimension B - + Set base for dimension C in the multisize measurements units (export mode). Configurer la valeur de base de la dimention C dans l'unité des mensurations multi-tailles (mode export). - + The dimension C base Valeur de base pour la dimension C @@ -20411,47 +20457,47 @@ Voulez-vous enregistrer vos changements ? Valeur d'espacement non valide. - + Invalid layout page left margin. Marge de gauche de la page du plan de coupe invalide. - + Invalid layout page right margin. Marge de droite de la page du plan de coupe invalide. - + Invalid layout page top margin. Marge du haut de la page du plan de coupe invalide. - + Invalid layout page bottom margin. Marge du bas de la page du plan de coupe invalide. - + Invalid tiled page left margin. Marge gauche de la page empilée invalide. - + Invalid tiled page right margin. Marge droite de la page empilée invalide. - + Invalid tiled page top margin. Marge haut de la page empilée invalide. - + Invalid tiled page bottom margin. Marge bas de la page empilée invalide. - + Layout units (as paper's one except px, export mode). Default units cm. Unités du plan de coupe (mode export : identiques à celles du papier, hors px). Unité par défaut en "cm". @@ -20461,7 +20507,7 @@ Voulez-vous enregistrer vos changements ? Charger les pièces de patron depuis le fichier de données brutes du plan de coupe. - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. Ignorer les marges d'impression (mode export). A choisir si besoin d'utiliser toute la surface de la feuille. En cas d'impression ultérieure, ne pas oublier de prendre en compte les marges. @@ -20791,7 +20837,7 @@ Voulez-vous enregistrer vos changements ? VLayoutConverter - + Could not change version. Impossible de modifier la version. @@ -20804,73 +20850,73 @@ Voulez-vous enregistrer vos changements ? Impossible d'enregistrer le fichier '%1'. Erreur : %2. - + Cannot set printer page size Impossible de définir la taille d'impression - + Cannot set printer margins Impossible de définir les marges d'impression - + Can't open file '%1' Impossible d'ouvrir le fichier '%1' - + Export raw layout data failed. %1. Echec de l'export au format données brutes du plan de coupe. %1. - + Creating file '%1' failed! %2 La création du fichier '%1' a échoué ! %2 - + Can't create an AAMA dxf file. Impossible de créer un fichier au format AAMA-DXF. - + Can't create an ASTM dxf file. Impossible de créer un fichier au format ASTM-DXF. - - + + Can't create an HP-GL file. La création du fichier HP-GL est impossible. - + (flat) files fichiers (non hiérarchiques - CSV) - + files fichiers - + Image files Format image - + tiled empilé - + Numerical control Contrôle numérique - + Raw Layout Data Données brutes de plan de coupe @@ -20883,12 +20929,12 @@ Voulez-vous enregistrer vos changements ? VLayoutPiece - + Piece %1 doesn't have shape. La pièce %1 n'a pas de forme. - + Invalid SVG font '%1'. Fallback to outline font. Police SVG '%1' invalide. Retour à la police vectorielle. @@ -21192,8 +21238,8 @@ Voulez-vous enregistrer vos changements ? Pièces non placées - - + + Pieces of Pièces sur @@ -21296,12 +21342,12 @@ Voulez-vous enregistrer vos changements ? VPGraphicsPiece - + Move to Déplacer vers - + Remove from Sheet Supprimer de la feuille @@ -21317,37 +21363,37 @@ Voulez-vous enregistrer vos changements ? VPLayoutFileReader - + Piece Pièce - + Error in line %1. Grainline main line is empty. Erreur à la ligne %1. Le tracé principal du droit-fil est vide. - + Got empty attribute '%1' Attribut '%1' manquant - + Error in line %1. Seam allowance is empty. Erreur ligne %1. La marge de couture est manquante. - + Error in line %1. Internal path shape is empty. Erreur dans la ligne %1. Le chemin interne est vide. - + Unexpected tag %1 in line %2 Tag %1 inattendu à ligne %2 - + Piece %1 invalid. %2 Pièce %1 invalide. %2 @@ -21399,7 +21445,7 @@ Voulez-vous enregistrer vos changements ? - + Properties Propriétés @@ -21556,9 +21602,9 @@ Voulez-vous enregistrer vos changements ? - - - + + + Export Exporter @@ -21608,84 +21654,84 @@ Voulez-vous enregistrer vos changements ? Avertir quand le plan excède la zone imprimable de la feuille - + zoom zoom - - + + Scale Echelle - + &Open &Ouvrir - + &Save &Sauvegarder - + Save &As S&auvegarder sous - + &Import Raw Layout Data Importer données brutes de plan de coupe (*rld) - + E&xit &Quitter - + &New &Nouveau - + About &Qt À propos de &Qt - + About &Puzzle A propos de &Puzzle - + Zoom in Zoom avant - + Zoom out Zoom arrière - + Zoom 1:1 Zoom 1:1 - + Zoom fit best Zoom optimal - + Zoom sheet Zoomer sur la feuille - - + + Preferences Préférences @@ -21706,7 +21752,7 @@ Voulez-vous enregistrer vos changements ? Impossible de créer le plan de coupe. - + Could not extract data from file '%1'. %2 Impossible d'extraire les données du fichier '%1'. %2 @@ -21729,102 +21775,102 @@ Voulez-vous enregistrer vos changements ? Pouces - + Scale: Echelle : - + untitled %1.vlt sans nom %1.vlt - + untitled.vlt sans-nom.vlt - + read only Lecture seule - + Cannot read settings from a malformed .INI file. Lecture des réglages impossible, fichier .INI invalide. - + Cannot save settings. Access denied. Impossible d'enregistrer les réglages. Accès refusé. - - - + + + Failed to open file, is it writable? Impossible d'ouvrir le fichier, avez-vous les droits d'écriture ? - + &New Window &Nouvelle Fenêtre - + Layout has been modified. Do you want to save your changes? Le plan de coupe a été modifié. Souhaitez-vous sauvegarder les modifications que vous avez apportées ? - - + + Layout files Fichiers du plan de coupe - - - + + + Open file Ouvrir fichier - + Could not save the file Impossible de sauvegarder le fichier - + layout plan de coupe - + Save as Enregistrer sous - + Failed to lock. This file already opened in another window. Verrouillage impossible. Le fichier est déjà ouvert dans une autre fenêtre. - + Could not save file Impossible de sauvegarder le fichier - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Verrouillage impossible car le fichier est déjà ouvert dans une autre fenêtre. Ceci se produit généralement quand 2 copies du programme sont ouvertes en même temps. - + Raw Layout files Fichiers de données brutes de plan de coupe - + About Qt À propos de Qt @@ -21861,13 +21907,13 @@ Voulez-vous enregistrer vos changements ? - + Horizontal: Horizontal : - + Vertical: Vertical : @@ -21950,71 +21996,76 @@ Voulez-vous enregistrer vos changements ? Imprimer aussi le plan général de l'empilement - + + Boundary together with notches + + + + Pieces gap: Espacement entre pièces : - + Export Layout Exporter le plan de coupe - + Undo commands Annuler - + Add Sheet Ajouter une feuille - - + + Print Imprimer - - + + Print preview Aperçu avant impression - - + + Print tiled Impression empilée - - + + Print preview tiled Imprimer l'aperçu empilé - + Editor Editeur - + Create or edit a watermark Créer ou éditer un filigrane - + Edit current Editer le filigrane chargé - + Load Charger - + Remove Retirer @@ -22025,13 +22076,13 @@ Voulez-vous enregistrer vos changements ? - + &Undo &Annuler - + &Redo &Rétablir @@ -22042,113 +22093,113 @@ Voulez-vous enregistrer vos changements ? Pixels - + Unsaved changes Changements non enregistrés - + Save… Enregistrer … - + Save Enregistrer - + Don't Save Ne pas sauvegarder - - + + Can't create a path Impossible de créer ce chemin d'accès - + Can't open file '%1' Impossible d'ouvrir le fichier '%1' - - + + Failed in flushing page to disk, disk full? Echec d'envoi de la page sur le disque, disque plein ? - - + + The layout is invalid. Plan de coupe non valide. - + The layout is invalid. Piece out of bound. Do you want to continue export? Le plan de coupe est non valide. Zone imprimable excédée. Voulez-vous poursuivre quand même ? - + The layout is invalid. Pieces superposition. Do you want to continue export? Le plan de coupe est non valide, les pièces se superposent. Voulez-vous poursuivre quand même ? - + Sheet %1 Feuille %1 - + translate pieces Déplacement des pièces - + rotate pieces Rotation des pièces - - + + For printing multipages document all sheet should have the same size. Pour imprimer un document multipages, toutes les feuilles doivent être de la même taille. - - - - - - - - + + + + + + + + Print error Erreur d'impression - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Impossible de poursuivre, aucune imprimante système détectée. - + Watermark files Fichiers filigranes - - - - + + + + Unable to get sheet page settings Impossible d'analyser les réglages de la feuille @@ -22158,27 +22209,27 @@ Voulez-vous enregistrer vos changements ? Afficher les numéros des pages - + Z value Valeur Z - + Bottom En arrière-plan - + Down Arrière + - + Up Avant + - + Top En avant-plan @@ -22188,12 +22239,12 @@ Voulez-vous enregistrer vos changements ? N'a d'effet que lors d'une impression depuis l'application. Pour exporter en incluant le tuilage, veuillez utiliser le réglage dédié - + sheet feuille - + Piece %1 invalid. %2 Pièce %1 invalide. %2 @@ -22334,37 +22385,37 @@ Voulez-vous enregistrer vos changements ? Erreur lors de la création ou de la modification de la pièce de patron - + Error creating or updating single point Erreur lors de la création ou de la modification du point - - + + Error creating or updating point of end line Erreur lors de la création ou de la mise à jour du point d'extrémité de la ligne - - + + Error creating or updating point along line Erreur lors de la création ou de la modification du point dans l'axe d'un segment - - + + Error creating or updating point of shoulder Erreur lors de la création ou de la modification du point épaule - - + + Error creating or updating point of normal Erreur lors de la création ou de la modification du point perpendiculaire - - + + Error creating or updating point of bisector Erreur lors de la création ou de la modification du point de bissectrice @@ -22373,128 +22424,128 @@ Voulez-vous enregistrer vos changements ? Impossible de créer ou de modifier le point d'intersection de 2 lignes - - + + Error creating or updating point of contact Erreur lors de la création ou de la modification du point d'intersection - + Error creating or updating modeling point Erreur lors de la création ou de la modification du point - + Error creating or updating height Erreur lors de la création ou de la modification de la stature - + Error creating or updating triangle Erreur lors de la création ou de la modification avec Outil Triangle - + Error creating or updating point of intersection Erreur lors de la création ou de la modification du point d'intersection - - + + Error creating or updating cut spline point Erreur lors de la création ou de la modification du point de segmentation de la courbe - - + + Error creating or updating cut spline path point Erreur lors de la création ou mise à jour du point de segmentation de la courbe - - + + Error creating or updating cut arc point Erreur lors de la création ou de la mise à jour du point de segmentation de l'arc - - + + Error creating or updating point of intersection line and axis Erreur lors de la création ou de la mise à jour du point d'intersection ligne/axe - - + + Error creating or updating point of intersection curve and axis Impossible de créer ou mettre à jour le point d'intersection entre courbe et axe - + Error creating or updating line Erreur lors de la création ou de la modification de la ligne - - + + Error creating or updating simple curve Erreur lors de la création ou de la mise à jour de la courbe - - + + Error creating or updating curve path Erreur lors de la création ou de la modification de la courbe - + Error creating or updating modeling simple curve Erreur lors de la création ou de la mise à jour de la courbe - + Error creating or updating modeling curve path Erreur lors de la création ou de la modification de la courbe - - - - + + + + Error creating or updating simple arc Erreur lors de la création ou mise à jour de l'arc - + Error creating or updating modeling arc Erreur lors de la création ou mise à jour de l'arc - + Error creating or updating union details Erreur lors de la création ou de la mise à jour de la fusion de pièces de patron - + Error creating or updating point of intersection arcs Impossible de créer ou mettre à jour le point d'intersection des arcs - + Error creating or updating point of intersection circles Impossible de créer ou de mettre à jour le point d'intersection des cercles - + Error creating or updating point from circle and tangent Impossible de créer ou mettre à jour le point d'intersection entre cercle et tangente - + Error creating or updating point from arc and tangent Impossible de créer ou mettre à jour le point d'intersection entre arc et tangente - + Error creating or updating true darts Impossible de créer ou mettre à jour une pince automatique @@ -22511,17 +22562,17 @@ Voulez-vous enregistrer vos changements ? Type de point inconnu '%1'. - + Unknown spline type '%1'. Type de courbe inconnu '%1'. - + Unknown arc type '%1'. Type d'arc inconnu '%1'. - + Unknown tools type '%1'. Type d'outil inconnu '%1'. @@ -22531,75 +22582,75 @@ Voulez-vous enregistrer vos changements ? Erreur, Id non unique. - + Error creating or updating point of intersection curves Impossible de créer ou mettre à jour le point d'intersection de courbes - + Error creating or updating simple interactive spline Erreur lors de la création ou de la modification de la courbe - + Error creating or updating interactive spline path Erreur lors de la création ou de la modification de la courbe - + Error creating or updating cubic bezier curve Erreur lors de la création ou de la modification de la courbe - + Error creating or updating cubic bezier path curve Erreur lors de la création ou de la mise à jour de la courbe - - + + Error creating or updating operation of rotation Erreur lors de la création ou de la modification de l'opération de rotation - + Unknown operation type '%1'. Type d'opération inconnu '%1'. - + Error creating or updating operation of flipping by line Erreur lors de la création ou la mise à jour de l'opération de reproduction d'objets en miroir par rapport à une ligne - + Error creating or updating operation of flipping by axis Erreur de création ou de mise à jour de l'opération de reproduction d'objets en miroir par rapport à un axe - - + + Error creating or updating operation of moving Erreur de création ou de la modification de l'opération de déplacement - + Error creating or updating point of line intersection Impossible de créer ou mettre à jour le point d'intersection de 2 lignes - - + + Error creating or updating simple elliptical arc Erreur de création ou de mise à jour de l'arc elliptique - + Unknown elliptical arc type '%1'. Type d'arc de cercle elliptique inconnu '%1'. - + Error creating or updating modeling elliptical arc Erreur lors de la création ou de mise à jour de l'arc elliptique @@ -22609,34 +22660,34 @@ Voulez-vous enregistrer vos changements ? Pièce de patron - + Unnamed path Chemin sans nom - - + + Error creating or updating a piece path Erreur lors de la création ou de la modification du contour de la pièce - + Error creating or updating pin point Erreur de création ou de mise à jour de point d'épingle - + Piece path doesn't contain nodes Le contour de la pièce ne contient pas de nœuds - - + + Error creating or updating place label Erreur de création ou de mise à jour de repère d'assemblage - + Can't find increment '%1' Impossible de trouver l'incrément '%1' @@ -24416,108 +24467,108 @@ Erreur de compatibilité du format .rld: actualFileVersion = %1 alors que fileVe VToolSeamAllowance - - + + Current seam allowance Marge de couture par défaut - + move pattern piece label déplacer l'étiquette de pièce - + resize pattern piece label redimensionner l'étiquette de pièce - + rotate pattern piece label pivoter l'étiquette de pièce - + move pattern info label déplacer l'étiquette de patron - + resize pattern info label redimensionner l'étiquette de patron - + rotate pattern info label pivoter l'étiquette de patron - + move grainline déplacer le droit-fil - + resize grainline redimensionner le droit-fil - + rotate grainline Pivoter le droit-fil - + Options Options - + In layout Dans le plan de coupe - + Hide main path Cacher le contour principal - + Reset piece label template Réinitialiser le modèle d'étiquette - + Delete Supprimer - + apply save detail options Appliquer les modifications - + multi deletion Suppression multiple - + Forbid flipping Interdire le placement en miroir - + Force flipping Forcer le placement en miroir - + This id (%1) is not unique. Cet identifiant (%1) n'est pas unique. - + Tool was used after deleting. L'outil a été utilisé après suppression. diff --git a/share/translations/valentina_he_IL.ts b/share/translations/valentina_he_IL.ts index 1843dcfdd..89b938f4f 100644 --- a/share/translations/valentina_he_IL.ts +++ b/share/translations/valentina_he_IL.ts @@ -4356,40 +4356,40 @@ - + Three groups: big, middle, small - + Two groups: big, small - + Descending area - - + + Millimiters מילימטר - - + + Centimeters סנטימטרים - - + + Inches אינצ'ים - + Pixels @@ -4399,22 +4399,22 @@ - + Auto crop unused length - + Unite pages (if possible) - + Gap width: - + Save length of the sheet @@ -4448,12 +4448,12 @@ מותאם אישית - + Wrong fields. - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4461,32 +4461,32 @@ - + Layout options - + Rule for choosing the next workpiece - + Divide into strips - + Multiplier - + Set multiplier for length of the biggest workpiece in layout. - + Enabling for sheets that have big height will speed up creating. @@ -4496,7 +4496,7 @@ - + None Printer ללא @@ -4527,70 +4527,85 @@ - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -7201,7 +7216,7 @@ Apply settings anyway? - + File name: @@ -7226,8 +7241,8 @@ Apply settings anyway? - - + + File base name @@ -7253,37 +7268,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins - + Right: - + Left: - + Top: - + Bottom: - + Paper format @@ -7293,20 +7313,20 @@ Apply settings anyway? - - - - + + + + cm ס"מ - + Templates: - + Orientation: @@ -7316,17 +7336,17 @@ Apply settings anyway? אפשרויות - + Scale - + Horizontal: - + Vertical: @@ -9434,27 +9454,27 @@ Apply settings anyway? נקודה - + Point along perpendicular - + Perpendicular point along line - + Point along bisector - + Point at distance and angle - + Point at distance along line נקודה במרחק לאורך הקו @@ -9467,12 +9487,12 @@ Apply settings anyway? קו - + Line between points קו בין נקודות - + Point at line intersection נקודה במפגש קוים @@ -9489,7 +9509,7 @@ Apply settings anyway? כלים ליצירת קשתות. - + Arc קשת @@ -9517,206 +9537,211 @@ Apply settings anyway? וחלק גזרה - + Measurements מידות - + Window חלון - + Toolbar files קבצי סרגל כלים - + ToolBar modes - + Toolbar pattern סרגל כלים גזרה - + Toolbar options אפשאות סרגל הכלים - + Toolbar tools כלי סרגל הכלים - + Tool options אפשרויות כלים - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New חדש - + &New וחדש - + Create a new pattern יצירת גזרה חדשה - + Open פתח - + &Open ופתח - + Open file with pattern פתח קובץ עם גזרה - - + + Save שמור - + &Save ושמור - + Save pattern שמירת תבנית - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point - + + Boundary together with notches + + + + Save not yet saved pattern - + Draw שרטט - + Details פרטים - + Pointer tools - + New pattern piece חלק גזרה חדש - + Add new pattern piece הוסף חלק גזרה חדש - + Change the label of pattern piece שנה תווית חלק גזרה @@ -9729,57 +9754,57 @@ Apply settings anyway? טבלאות משתנים - - + + History היסטוריה - + About &Qt - + &About Valentina ואודות ולנטינה - + E&xit - + Exit the application צא מהתוכנה - + Preferences העדפות - + Pattern properties - - + + Zoom in התמקד - + zoom in התמקד - - - + + + Zoom out התרחק @@ -9792,7 +9817,7 @@ Apply settings anyway? זום מקורי - + Zoom fit best זום מותאם @@ -9809,7 +9834,7 @@ Apply settings anyway? דווח על תקלה... - + Report bug דווח על תקלה @@ -9826,8 +9851,8 @@ Apply settings anyway? הראה עזרה אונליין - - + + Pattern piece %1 @@ -9981,7 +10006,7 @@ Apply settings anyway? - + About Qt @@ -10005,7 +10030,7 @@ Apply settings anyway? - + Open file @@ -10022,7 +10047,7 @@ Apply settings anyway? - + Error empty parameter. שגיאה חסר פרמטר. @@ -10038,107 +10063,107 @@ Apply settings anyway? - + Bad id. - + File saved - + untitled.val - + &Undo - + &Redo - + Pattern piece: - + Enter a new label for the pattern piece. - - + + File error. טעות קובץ. - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? - + Reopen files. - + Special point on shoulder - + Triangle tool - + Point from X and Y of two other points - + Point intersect line and axis - + Simple curve - + Curved path - + Segmenting a simple curve - + Segment a curved path - + Point intersect curve and axis - + Segment an arc @@ -10147,17 +10172,17 @@ Apply settings anyway? כלי תוספת תפר - + Union tool - + Last Tool - + Activate last used tool again @@ -10167,94 +10192,94 @@ Apply settings anyway? - + Mode - + Pointer - + Config pattern piece - + Layout - + Show Curve Details - + Show/hide control points and curve direction - + Point of intersection arcs - + Point of intersection circles - + Point from circle and tangent - + Point from arc and tangent - + Arc with given length - + Layout pages - + Print - + Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) - + Print preview - + Print preview original layout - - + + Export original layout @@ -10284,12 +10309,12 @@ Apply settings anyway? - + Layout mode - + Unsaved changes @@ -10300,12 +10325,12 @@ Apply settings anyway? - + You can't export empty scene. - + Create new Layout @@ -10320,7 +10345,7 @@ Apply settings anyway? - + Measurement file has unknown format. @@ -10335,68 +10360,68 @@ Apply settings anyway? - + Couldn't update measurements. - - + + The measurements file '%1' could not be found. - + Loading measurements file - - - + + + The method %1 does nothing in GUI mode - - - - + + + + Export error. - + Please, provide one input file. - + Print an original layout - + Preview tiled PDF - + Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -10411,7 +10436,7 @@ Apply settings anyway? - + True darts @@ -10431,12 +10456,12 @@ Apply settings anyway? - + Don't Save - + Point intersection curves @@ -10446,7 +10471,7 @@ Apply settings anyway? - + Curve tool which uses point as control handle @@ -10461,24 +10486,24 @@ Apply settings anyway? - + Rotate objects - - - + + + Close pattern - + Midpoint between two points - + Group @@ -10495,8 +10520,8 @@ Apply settings anyway? - - + + Original zoom @@ -10518,22 +10543,22 @@ Apply settings anyway? - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line - + Flipping objects by axis - + Move objects @@ -10548,7 +10573,7 @@ Apply settings anyway? - + Elliptical Arc @@ -10568,89 +10593,89 @@ Apply settings anyway? - + read only - + Variables Table - + Contains information about increments and internal variables - + Load Individual - + Load Individual measurements file - - + + Load Multisize - + Load multisize measurements file - + Open Tape - + Edit Current - + Edit linked to the pattern measurements - + Sync - + Synchronize linked to the pattern measurements after change - + Unload Current - + Unload measurements if they were not used in a pattern file - - + + Individual measurements - - + + Multisize measurements @@ -10661,7 +10686,7 @@ Apply settings anyway? - + Pin tool @@ -10671,17 +10696,17 @@ Apply settings anyway? - + Insert node tool - + Open Tape app for creating or editing measurements file - + Export increments to CSV @@ -10721,143 +10746,143 @@ Apply settings anyway? - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool - + Duplicate detail tool @@ -10867,7 +10892,7 @@ Apply settings anyway? - + The measurements file '%1' could not be found or provides not enough information. @@ -10887,17 +10912,17 @@ Apply settings anyway? - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -10921,27 +10946,27 @@ Apply settings anyway? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -10952,119 +10977,119 @@ Apply settings anyway? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove הסר - + Edit current - + Editor - + Create or edit a watermark @@ -11074,37 +11099,37 @@ Apply settings anyway? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update עדכון - + Update manual layout @@ -11130,87 +11155,87 @@ Apply settings anyway? - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -11230,38 +11255,38 @@ Apply settings anyway? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled - + All files - + Save Image - + Visibility group - + Show accuracy radius @@ -11269,100 +11294,100 @@ Apply settings anyway? MainWindowsNoGUI - + unnamed - + Couldn't prepare data for creation layout - - + + Can't create a path - + Preparing details for layout - + Pattern גזרה - + Name שם - + Value ערך - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description - + Measurement file has unknown format. - + File error. טעות קובץ. - + Measurement file doesn't include all required measurements. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -11391,7 +11416,7 @@ Apply settings anyway? MoveLabel - + move point label @@ -12742,14 +12767,14 @@ This option will take an affect after restart. - + Can't convert toUInt parameter - + Can't convert toBool parameter @@ -12760,7 +12785,7 @@ This option will take an affect after restart. - + Can't convert toDouble parameter @@ -12789,22 +12814,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -12814,7 +12839,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -12858,13 +12883,13 @@ This option will take an affect after restart. - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -12874,7 +12899,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -12906,8 +12931,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -12929,7 +12954,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -12941,47 +12966,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -13009,39 +13034,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -13069,23 +13094,18 @@ This option will take an affect after restart. - + Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -13133,25 +13153,25 @@ This option will take an affect after restart. - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -13167,13 +13187,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -13700,7 +13720,7 @@ This option will take an affect after restart. - + 0 results @@ -13751,21 +13771,21 @@ This option will take an affect after restart. - + Name measurement column שם - + Full name measurement column - + Group measurement column @@ -13991,7 +14011,7 @@ This option will take an affect after restart. - + Import from CSV @@ -14001,244 +14021,244 @@ This option will take an affect after restart. - + Show in Finder - + File '%1' doesn't exist! - + File error. טעות קובץ. - + untitled %1 - - + + untitled - + read only - - + + Known measurements - + All files - + Could not save the file - + known measurements - + Save as שמירה בשם - + Failed to lock. This file already opened in another window. - + Could not save file לא ניתן לשמור את הקובץ - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt - + Empty - + File was not saved yet. - + Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save שמור - + Don't Save - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list - + Unknown measurement - + &New Window - - + + Unnamed image %1 - + Open file - + Length units - + Degrees - + None ללא - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column - + Description measurement column - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -14525,7 +14545,7 @@ This option will take an affect after restart. - + Pattern unit: @@ -14590,19 +14610,19 @@ This option will take an affect after restart. - + unknown gender - + male gender - + female gender @@ -14830,38 +14850,38 @@ This option will take an affect after restart. - - + + Name measurement column שם - - + + Full name measurement column - - + + Calculated value measurement column - + Formula measurement column - + Base value measurement column @@ -15065,40 +15085,40 @@ This option will take an affect after restart. ללא - + Invalid link - + Known measurements %1 - - + + Description measurement column - - - + + + Shift measurement column - + Empty list - - - + + + %1 shift @@ -15115,22 +15135,22 @@ This option will take an affect after restart. - + Millimeters - + Inches אינצ'ים - + Centimeters סנטימטרים - + Degrees @@ -15156,7 +15176,7 @@ This option will take an affect after restart. - + 0 results @@ -16244,12 +16264,12 @@ This option will take an affect after restart. - + None ללא - + Known measurements %1 @@ -16518,27 +16538,22 @@ This option will take an affect after restart. - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -17460,26 +17475,26 @@ This option will take an affect after restart. VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -17564,21 +17579,39 @@ This option will take an affect after restart. VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -17590,58 +17623,58 @@ This option will take an affect after restart. VCommandLine - + Path to custom measure file (export mode). - + The measure file - + Format number - - + + Template number - + The page width - + The measure unit - + Auto crop unused length (export mode). - + The unit - + The gap width - + Grouping type - + Page height, width, units must be used all 3 at once. @@ -17652,7 +17685,7 @@ This option will take an affect after restart. - + Unsupported paper units. @@ -17662,38 +17695,38 @@ This option will take an affect after restart. - - + + Export options can be used with single input file only. - + Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files - + The destination folder - + Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -17708,397 +17741,402 @@ This option will take an affect after restart. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Gap width must be used together with shift units. - + Left margin must be used together with page units. - + Right margin must be used together with page units. - + Top margin must be used together with page units. - + Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Number corresponding to output format (default = 0, export mode): - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time זמן - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -18123,47 +18161,47 @@ This option will take an affect after restart. - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -18173,7 +18211,7 @@ This option will take an affect after restart. - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -18448,7 +18486,7 @@ This option will take an affect after restart. VLayoutConverter - + Could not change version. @@ -18461,73 +18499,73 @@ This option will take an affect after restart. - + Cannot set printer page size - + Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -18540,12 +18578,12 @@ This option will take an affect after restart. VLayoutPiece - + Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -18849,8 +18887,8 @@ This option will take an affect after restart. - - + + Pieces of @@ -18942,12 +18980,12 @@ This option will take an affect after restart. VPGraphicsPiece - + Move to - + Remove from Sheet @@ -18963,37 +19001,37 @@ This option will take an affect after restart. VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -19045,7 +19083,7 @@ This option will take an affect after restart. - + Properties @@ -19202,9 +19240,9 @@ This option will take an affect after restart. - - - + + + Export @@ -19254,84 +19292,84 @@ This option will take an affect after restart. - + zoom - - + + Scale - + &Open ופתח - + &Save ושמור - + Save &As - + &Import Raw Layout Data - + E&xit - + &New וחדש - + About &Qt - + About &Puzzle - + Zoom in התמקד - + Zoom out התרחק - + Zoom 1:1 - + Zoom fit best זום מותאם - + Zoom sheet - - + + Preferences העדפות @@ -19352,7 +19390,7 @@ This option will take an affect after restart. - + Could not extract data from file '%1'. %2 @@ -19375,102 +19413,102 @@ This option will take an affect after restart. אינצ'ים - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file - + Could not save the file - + layout - + Save as שמירה בשם - + Failed to lock. This file already opened in another window. - + Could not save file לא ניתן לשמור את הקובץ - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt @@ -19507,13 +19545,13 @@ This option will take an affect after restart. - + Horizontal: - + Vertical: @@ -19596,71 +19634,76 @@ This option will take an affect after restart. - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print - - + + Print preview - - + + Print tiled - - + + Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove הסר @@ -19671,13 +19714,13 @@ This option will take an affect after restart. - + &Undo - + &Redo @@ -19688,113 +19731,113 @@ This option will take an affect after restart. - + Unsaved changes - + Save… - + Save שמור - + Don't Save - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -19804,27 +19847,27 @@ This option will take an affect after restart. - + Z value - + Bottom - + Down - + Up - + Top @@ -19834,12 +19877,12 @@ This option will take an affect after restart. - + sheet - + Piece %1 invalid. %2 @@ -19976,163 +20019,163 @@ This option will take an affect after restart. - + Error creating or updating single point - - + + Error creating or updating point of end line - - + + Error creating or updating point along line - - + + Error creating or updating point of shoulder - - + + Error creating or updating point of normal - - + + Error creating or updating point of bisector - - + + Error creating or updating point of contact - + Error creating or updating modeling point - + Error creating or updating height - + Error creating or updating triangle - + Error creating or updating point of intersection - - + + Error creating or updating cut spline point - - + + Error creating or updating cut spline path point - - + + Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis - + Error creating or updating line - - + + Error creating or updating simple curve - - + + Error creating or updating curve path - + Error creating or updating modeling simple curve - + Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc - + Error creating or updating modeling arc - + Error creating or updating union details - + Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent - + Error creating or updating true darts @@ -20149,17 +20192,17 @@ This option will take an affect after restart. - + Unknown spline type '%1'. - + Unknown arc type '%1'. - + Unknown tools type '%1'. @@ -20169,75 +20212,75 @@ This option will take an affect after restart. - + Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline - + Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation - + Unknown operation type '%1'. - + Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving - + Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc @@ -20247,34 +20290,34 @@ This option will take an affect after restart. פרט - + Unnamed path - - + + Error creating or updating a piece path - + Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -21901,108 +21944,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance - + move pattern piece label - + resize pattern piece label - + rotate pattern piece label - + move pattern info label - + resize pattern info label - + rotate pattern info label - + move grainline - + resize grainline - + rotate grainline - + Options אפשרויות - + In layout - + Hide main path - + Reset piece label template - + Delete למחוק - + apply save detail options - + multi deletion - + Forbid flipping אסור היפוך - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_id_ID.ts b/share/translations/valentina_id_ID.ts index 423ba9b75..1653d53c1 100644 --- a/share/translations/valentina_id_ID.ts +++ b/share/translations/valentina_id_ID.ts @@ -4131,40 +4131,40 @@ - + Three groups: big, middle, small - + Two groups: big, small - + Descending area - - + + Millimiters Milimeter - - + + Centimeters Centimeter - - + + Inches Inchi - + Pixels @@ -4174,22 +4174,22 @@ - + Auto crop unused length - + Unite pages (if possible) - + Gap width: - + Save length of the sheet @@ -4219,12 +4219,12 @@ - + Wrong fields. - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4232,32 +4232,32 @@ - + Layout options - + Rule for choosing the next workpiece - + Divide into strips - + Multiplier - + Set multiplier for length of the biggest workpiece in layout. - + Enabling for sheets that have big height will speed up creating. @@ -4267,7 +4267,7 @@ - + None Printer @@ -4298,70 +4298,85 @@ - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -6975,7 +6990,7 @@ Apply settings anyway? - + File name: @@ -7000,8 +7015,8 @@ Apply settings anyway? - - + + File base name @@ -7027,37 +7042,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins - + Right: - + Left: - + Top: - + Bottom: - + Paper format @@ -7067,20 +7087,20 @@ Apply settings anyway? - - - - + + + + cm cm - + Templates: - + Orientation: @@ -7090,17 +7110,17 @@ Apply settings anyway? pilihan - + Scale - + Horizontal: - + Vertical: @@ -9187,37 +9207,37 @@ Apply settings anyway? - + Point along perpendicular - + Perpendicular point along line - + Point along bisector - + Point at distance and angle - + Point at distance along line - + Line between points - + Point at line intersection @@ -9226,7 +9246,7 @@ Apply settings anyway? kurva - + Arc busur @@ -9250,277 +9270,282 @@ Apply settings anyway? - + Measurements pengukuran - + Window - + Toolbar files - + ToolBar modes - + Toolbar pattern - + Toolbar options - + Toolbar tools - + Tool options - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New - + &New - + Create a new pattern - + Open - + &Open - + Open file with pattern - - + + Save Simpan - + &Save - + Save pattern - + Save not yet saved pattern - + Draw - + Details - + Pointer tools - + New pattern piece - + Add new pattern piece - + Change the label of pattern piece - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point - - + + Boundary together with notches + + + + + History - + About &Qt - + &About Valentina - + E&xit - + Exit the application - + Preferences - + Pattern properties - - + + Zoom in - + zoom in - - - + + + Zoom out - + Zoom fit best - + Report bug - - + + Pattern piece %1 @@ -9679,12 +9704,12 @@ Apply settings anyway? - + The pattern has been modified. Do you want to save your changes? - + About Qt @@ -9708,7 +9733,7 @@ Apply settings anyway? - + Open file Buka File @@ -9725,7 +9750,7 @@ Apply settings anyway? - + Error empty parameter. @@ -9741,17 +9766,17 @@ Apply settings anyway? - + Bad id. - + File saved File telah disimpan - + untitled.val tanpajudul.val @@ -9763,106 +9788,106 @@ Apakah anda ingin menyimpan perubahan anda? - + &Undo - + &Redo - + Pattern piece: - + Enter a new label for the pattern piece. - - + + File error. - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? - + Reopen files. - + Special point on shoulder - + Triangle tool - + Point from X and Y of two other points - + Point intersect line and axis - + Simple curve - + Curved path - + Segmenting a simple curve - + Segment a curved path - + Point intersect curve and axis - + Segment an arc - + Union tool - + Last Tool - + Activate last used tool again @@ -9872,109 +9897,109 @@ Apakah anda ingin menyimpan perubahan anda? - + Mode - + Pointer - + Config pattern piece - + Layout - + Show Curve Details - + Show/hide control points and curve direction - + Tool "Select" - + Layout settings - + Layout export as - + Point of intersection arcs - + Point of intersection circles - + Point from circle and tangent - + Point from arc and tangent - + Arc with given length - + Layout pages - + Print - + Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) - + Print preview - + Print preview original layout - - + + Export original layout @@ -10004,12 +10029,12 @@ Apakah anda ingin menyimpan perubahan anda? - + Layout mode - + Unsaved changes @@ -10020,12 +10045,12 @@ Apakah anda ingin menyimpan perubahan anda? - + You can't export empty scene. - + Create new Layout @@ -10040,7 +10065,7 @@ Apakah anda ingin menyimpan perubahan anda? - + Measurement file has unknown format. @@ -10055,68 +10080,68 @@ Apakah anda ingin menyimpan perubahan anda? - + Couldn't update measurements. - - + + The measurements file '%1' could not be found. - + Loading measurements file - - - + + + The method %1 does nothing in GUI mode - - - - + + + + Export error. - + Please, provide one input file. - + Print an original layout - + Preview tiled PDF - + Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -10131,7 +10156,7 @@ Apakah anda ingin menyimpan perubahan anda? - + True darts @@ -10151,12 +10176,12 @@ Apakah anda ingin menyimpan perubahan anda? - + Don't Save - + Point intersection curves @@ -10166,7 +10191,7 @@ Apakah anda ingin menyimpan perubahan anda? - + Curve tool which uses point as control handle @@ -10181,24 +10206,24 @@ Apakah anda ingin menyimpan perubahan anda? - + Rotate objects - - - + + + Close pattern - + Midpoint between two points - + Group @@ -10215,8 +10240,8 @@ Apakah anda ingin menyimpan perubahan anda? - - + + Original zoom @@ -10238,22 +10263,22 @@ Apakah anda ingin menyimpan perubahan anda? - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line - + Flipping objects by axis - + Move objects @@ -10268,7 +10293,7 @@ Apakah anda ingin menyimpan perubahan anda? - + Elliptical Arc @@ -10288,89 +10313,89 @@ Apakah anda ingin menyimpan perubahan anda? - + read only - + Variables Table - + Contains information about increments and internal variables - + Load Individual - + Load Individual measurements file - - + + Load Multisize - + Load multisize measurements file - + Open Tape - + Edit Current - + Edit linked to the pattern measurements - + Sync - + Synchronize linked to the pattern measurements after change - + Unload Current - + Unload measurements if they were not used in a pattern file - - + + Individual measurements - - + + Multisize measurements @@ -10381,7 +10406,7 @@ Apakah anda ingin menyimpan perubahan anda? - + Pin tool @@ -10391,17 +10416,17 @@ Apakah anda ingin menyimpan perubahan anda? - + Insert node tool - + Open Tape app for creating or editing measurements file - + Export increments to CSV @@ -10441,128 +10466,128 @@ Apakah anda ingin menyimpan perubahan anda? - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Place label tool - + Duplicate detail tool @@ -10572,7 +10597,7 @@ Apakah anda ingin menyimpan perubahan anda? - + The measurements file '%1' could not be found or provides not enough information. @@ -10592,17 +10617,17 @@ Apakah anda ingin menyimpan perubahan anda? - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -10626,27 +10651,27 @@ Apakah anda ingin menyimpan perubahan anda? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -10657,119 +10682,119 @@ Apakah anda ingin menyimpan perubahan anda? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove - + Edit current - + Editor - + Create or edit a watermark @@ -10779,37 +10804,37 @@ Apakah anda ingin menyimpan perubahan anda? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update - + Update manual layout @@ -10830,82 +10855,82 @@ Apakah anda ingin menyimpan perubahan anda? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -10925,38 +10950,38 @@ Apakah anda ingin menyimpan perubahan anda? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled - + All files - + Save Image - + Visibility group - + Show accuracy radius @@ -10964,100 +10989,100 @@ Apakah anda ingin menyimpan perubahan anda? MainWindowsNoGUI - + unnamed - + Couldn't prepare data for creation layout - - + + Can't create a path - + Preparing details for layout - + Pattern Pola - + Name Nama - + Value - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description - + Measurement file has unknown format. - + File error. - + Measurement file doesn't include all required measurements. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -11086,7 +11111,7 @@ Apakah anda ingin menyimpan perubahan anda? MoveLabel - + move point label @@ -12411,14 +12436,14 @@ This option will take an affect after restart. - + Can't convert toUInt parameter - + Can't convert toBool parameter @@ -12429,7 +12454,7 @@ This option will take an affect after restart. - + Can't convert toDouble parameter @@ -12458,22 +12483,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -12483,7 +12508,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -12527,13 +12552,13 @@ This option will take an affect after restart. - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -12543,7 +12568,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -12575,8 +12600,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -12598,7 +12623,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -12610,47 +12635,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -12678,39 +12703,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -12738,23 +12763,18 @@ This option will take an affect after restart. - + Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -12802,25 +12822,25 @@ This option will take an affect after restart. - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -12836,13 +12856,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -13369,7 +13389,7 @@ This option will take an affect after restart. - + 0 results @@ -13420,21 +13440,21 @@ This option will take an affect after restart. - + Name measurement column Nama - + Full name measurement column - + Group measurement column @@ -13646,7 +13666,7 @@ This option will take an affect after restart. - + Import from CSV @@ -13666,244 +13686,244 @@ This option will take an affect after restart. - + Show in Finder - + File '%1' doesn't exist! - + File error. - + untitled %1 - - + + untitled - + read only - - + + Known measurements - + All files - + Could not save the file - + known measurements - + Save as - + Failed to lock. This file already opened in another window. - + Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt - + Empty - + File was not saved yet. - + Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save Simpan - + Don't Save - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list - + Unknown measurement - + &New Window - - + + Unnamed image %1 - + Open file Buka File - + Length units - + Degrees - + None - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column rumus - + Description measurement column - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -14172,7 +14192,7 @@ This option will take an affect after restart. - + Pattern unit: @@ -14237,19 +14257,19 @@ This option will take an affect after restart. - + unknown gender - + male gender - + female gender @@ -14477,38 +14497,38 @@ This option will take an affect after restart. - - + + Name measurement column Nama - - + + Full name measurement column - - + + Calculated value measurement column - + Formula measurement column rumus - + Base value measurement column @@ -14712,40 +14732,40 @@ This option will take an affect after restart. - + Invalid link - + Known measurements %1 - - + + Description measurement column - - - + + + Shift measurement column - + Empty list - - - + + + %1 shift @@ -14762,22 +14782,22 @@ This option will take an affect after restart. - + Millimeters - + Inches Inchi - + Centimeters Centimeter - + Degrees @@ -14809,7 +14829,7 @@ This option will take an affect after restart. - + 0 results @@ -15890,12 +15910,12 @@ This option will take an affect after restart. - + None - + Known measurements %1 @@ -16164,27 +16184,22 @@ This option will take an affect after restart. - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -17106,26 +17121,26 @@ This option will take an affect after restart. VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -17210,21 +17225,39 @@ This option will take an affect after restart. VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -17236,33 +17269,33 @@ This option will take an affect after restart. VCommandLine - + Path to custom measure file (export mode). - + The measure file - + Format number - - + + Template number - + The page width - + The measure unit @@ -17271,27 +17304,27 @@ This option will take an affect after restart. sudut - + Auto crop unused length (export mode). - + The unit - + The gap width - + Grouping type - + Page height, width, units must be used all 3 at once. @@ -17302,7 +17335,7 @@ This option will take an affect after restart. - + Unsupported paper units. @@ -17312,38 +17345,38 @@ This option will take an affect after restart. - - + + Export options can be used with single input file only. - + Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files - + The destination folder - + Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -17358,397 +17391,402 @@ This option will take an affect after restart. Berkas pola. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Gap width must be used together with shift units. - + Left margin must be used together with page units. - + Right margin must be used together with page units. - + Top margin must be used together with page units. - + Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Number corresponding to output format (default = 0, export mode): - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -17773,47 +17811,47 @@ This option will take an affect after restart. - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -17823,7 +17861,7 @@ This option will take an affect after restart. - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -18094,7 +18132,7 @@ This option will take an affect after restart. VLayoutConverter - + Could not change version. @@ -18107,73 +18145,73 @@ This option will take an affect after restart. - + Cannot set printer page size - + Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -18186,12 +18224,12 @@ This option will take an affect after restart. VLayoutPiece - + Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -18495,8 +18533,8 @@ This option will take an affect after restart. - - + + Pieces of @@ -18588,12 +18626,12 @@ This option will take an affect after restart. VPGraphicsPiece - + Move to - + Remove from Sheet @@ -18609,37 +18647,37 @@ This option will take an affect after restart. VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -18691,7 +18729,7 @@ This option will take an affect after restart. - + Properties @@ -18856,9 +18894,9 @@ This option will take an affect after restart. - - - + + + Export @@ -18912,84 +18950,84 @@ This option will take an affect after restart. - + zoom - - + + Scale - + &Open - + &Save - + Save &As - + &Import Raw Layout Data - + E&xit - + &New - + About &Qt - + About &Puzzle - + Zoom in - + Zoom out - + Zoom 1:1 - + Zoom fit best - + Zoom sheet - - + + Preferences @@ -19010,7 +19048,7 @@ This option will take an affect after restart. - + Could not extract data from file '%1'. %2 @@ -19033,102 +19071,102 @@ This option will take an affect after restart. Inchi - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Buka File - + Could not save the file - + layout - + Save as - + Failed to lock. This file already opened in another window. - + Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt @@ -19165,13 +19203,13 @@ This option will take an affect after restart. - + Horizontal: - + Vertical: @@ -19254,71 +19292,76 @@ This option will take an affect after restart. - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print - - + + Print preview - - + + Print tiled - - + + Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove @@ -19329,13 +19372,13 @@ This option will take an affect after restart. - + &Undo - + &Redo @@ -19346,113 +19389,113 @@ This option will take an affect after restart. - + Unsaved changes - + Save… - + Save Simpan - + Don't Save - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -19462,27 +19505,27 @@ This option will take an affect after restart. - + Z value - + Bottom - + Down - + Up - + Top @@ -19492,12 +19535,12 @@ This option will take an affect after restart. - + sheet - + Piece %1 invalid. %2 @@ -19634,163 +19677,163 @@ This option will take an affect after restart. - + Error creating or updating single point - - + + Error creating or updating point of end line - - + + Error creating or updating point along line - - + + Error creating or updating point of shoulder - - + + Error creating or updating point of normal - - + + Error creating or updating point of bisector - - + + Error creating or updating point of contact - + Error creating or updating modeling point - + Error creating or updating height - + Error creating or updating triangle - + Error creating or updating point of intersection - - + + Error creating or updating cut spline point - - + + Error creating or updating cut spline path point - - + + Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis - + Error creating or updating line - - + + Error creating or updating simple curve - - + + Error creating or updating curve path - + Error creating or updating modeling simple curve - + Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc - + Error creating or updating modeling arc - + Error creating or updating union details - + Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent - + Error creating or updating true darts @@ -19807,17 +19850,17 @@ This option will take an affect after restart. - + Unknown spline type '%1'. - + Unknown arc type '%1'. - + Unknown tools type '%1'. @@ -19827,75 +19870,75 @@ This option will take an affect after restart. - + Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline - + Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation - + Unknown operation type '%1'. - + Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving - + Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc @@ -19905,34 +19948,34 @@ This option will take an affect after restart. rincial - + Unnamed path - - + + Error creating or updating a piece path - + Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -21540,108 +21583,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance - + move pattern piece label - + resize pattern piece label - + rotate pattern piece label - + move pattern info label - + resize pattern info label - + rotate pattern info label - + move grainline - + resize grainline - + rotate grainline - + Options pilihan - + In layout - + Hide main path - + Reset piece label template - + Delete hapus - + apply save detail options - + multi deletion - + Forbid flipping - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_it_IT.ts b/share/translations/valentina_it_IT.ts index edab99739..72cbb4467 100644 --- a/share/translations/valentina_it_IT.ts +++ b/share/translations/valentina_it_IT.ts @@ -1292,22 +1292,22 @@ Move on top - Sposta in alto + Sposta in alto Move up - Sposta su + Sposta su Move down - Sposta giù + Sposta giù Move on bottom - Sposta in basso + Sposta in basso @@ -4759,40 +4759,40 @@ Criterio della scelta del pezzo successivo - + Three groups: big, middle, small Tre gruppi: grandi, medi, piccoli - + Two groups: big, small Due gruppi: grandi, piccoli - + Descending area Area discendente - - + + Millimiters Millimetri - - + + Centimeters Centimetri - - + + Inches Pollici - + Pixels Pixel @@ -4802,22 +4802,22 @@ Crea un layout - + Auto crop unused length Ritaglio automatico della lunghezza inutilizzata - + Unite pages (if possible) Unisci pagine (se possibile) - + Gap width: Larghezza divario: - + Save length of the sheet Salva lunghezza del foglio @@ -4899,7 +4899,7 @@ Personalizzato - + Wrong fields. Campi sbagliati. @@ -4912,7 +4912,7 @@ Apply settings anyway? Applicare le impostazioni comunque? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4923,7 +4923,7 @@ Applicare le impostazioni comunque? ⇥Area discendente = 2 - + Layout options Opzioni di Layout @@ -4932,7 +4932,7 @@ Applicare le impostazioni comunque? Shift/Offset lunghezza: - + Rule for choosing the next workpiece Regole per scegliere il pezzo successivo @@ -4941,17 +4941,17 @@ Applicare le impostazioni comunque? Consenti ai fogli con un'altezza grande di velocizzare la creazione. - + Divide into strips Dividi in strisce - + Multiplier Moltiplicatore - + Set multiplier for length of the biggest workpiece in layout. Imposta il moltiplicatore per la lunghezza del pezzo più grande sul layout. @@ -4960,7 +4960,7 @@ Applicare le impostazioni comunque? x - + Enabling for sheets that have big height will speed up creating. Consenti ai fogli con un'altezza maggiore di velocizzare la creazione. @@ -4970,7 +4970,7 @@ Applicare le impostazioni comunque? Stampa: - + None Printer Nessun @@ -5001,7 +5001,7 @@ Applicare le impostazioni comunque? Ignora margini - + Margins go beyond printing. Apply settings anyway? @@ -5010,63 +5010,78 @@ Apply settings anyway? Applicare la configurazione comunque? - + Follow grainline Rispetta drittofilo - + Time: Ora: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. Tempo concesso all’algoritmo per trovare il miglior piazzamento. - + Efficiency: Efficienza: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width Ritaglio automatico della lunghezza inutilizzata - + Prefer one sheet solution - + min minutes min - + Enable this option to prefer getting one sheet solutions. @@ -8138,7 +8153,7 @@ Applicare la configurazione comunque? Salva layout - + File name: Nome file: @@ -8175,8 +8190,8 @@ Applicare la configurazione comunque? Seleziona il percorso alla cartella di destinazione - - + + File base name Nome del file di base @@ -8210,37 +8225,42 @@ Applicare la configurazione comunque? + Boundary together with notches + + + + Not available options - + Margins Margini - + Right: Destra: - + Left: Sinistra: - + Top: Top: - + Bottom: Fondo: - + Paper format Formato carta @@ -8250,20 +8270,20 @@ Applicare la configurazione comunque? Cerca… - - - - + + + + cm cm - + Templates: Modelli: - + Orientation: Orientamento: @@ -8273,17 +8293,17 @@ Applicare la configurazione comunque? Opzioni - + Scale - + Horizontal: - + Vertical: @@ -9798,22 +9818,22 @@ Applicare la configurazione comunque? Move on top - Sposta in alto + Sposta in alto Move up - Sposta su + Sposta su Move down - Sposta giù + Sposta giù Move on bottom - Sposta in basso + Sposta in basso @@ -10639,27 +10659,27 @@ Applicare la configurazione comunque? Punto - + Point along perpendicular Punto lungo la perpendicolare - + Perpendicular point along line Punto perpendicolare lungo una linea - + Point along bisector Punto lungo la bisettrice - + Point at distance and angle Punto a distanza e angolo - + Point at distance along line Punto a distanza lungo la linea @@ -10672,12 +10692,12 @@ Applicare la configurazione comunque? Linea - + Line between points Linea tra punti - + Point at line intersection Punto a @@ -10694,7 +10714,7 @@ Applicare la configurazione comunque? Strumenti per creare archi. - + Arc Arco @@ -10722,210 +10742,215 @@ Applicare la configurazione comunque? &Parte modello - + Measurements Misure - + Window Finestra - + Toolbar files File toolbar - + ToolBar modes Modalità toolbar - + Toolbar pattern Pattern toolbar - + Toolbar options Opzioni toolbar - + Toolbar tools Strumenti toolbar - + Tool options Opzioni strumenti - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Nuovo - + &New &Nuovo - + Create a new pattern Crea nuovo modello - + Open Apri - + &Open &Apri - + Open file with pattern Apri file con modello - - + + Save Salva - + &Save &Salva - + Save pattern Salva modello - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Salva &Come... - + Save not yet saved pattern Salva il modello non ancora salvato - + Draw Disegna - + Details Dettagli - + Pointer tools Strumenti cursore - + New pattern piece Nuova parte modello - + Add new pattern piece Aggiungi nuova parte modello - + Change the label of pattern piece Cambia l'etichetta del pezzo di modello @@ -10938,57 +10963,57 @@ Applicare la configurazione comunque? Tabelle delle variabili - - + + History Storia - + About &Qt About &Qt - + &About Valentina &About Valentina - + E&xit U&scita - + Exit the application Esci dall'applicazione - + Preferences Preferenze - + Pattern properties Proprietà modello - - + + Zoom in Ingrandire - + zoom in ingrandire - - - + + + Zoom out Rimpicciolire @@ -11005,7 +11030,7 @@ Applicare la configurazione comunque? Zoom Originale - + Zoom fit best Zoom migliore adattamento @@ -11022,7 +11047,7 @@ Applicare la configurazione comunque? Segnalazione Bug... - + Report bug Segnalazione bug @@ -11039,8 +11064,8 @@ Applicare la configurazione comunque? Mostra aiuto online - - + + Pattern piece %1 Parte del modello %1 @@ -11133,7 +11158,7 @@ Applicare la configurazione comunque? Seleziona curva - + About Qt About Qt @@ -11173,7 +11198,7 @@ Applicare la configurazione comunque? - + Open file Apri il file @@ -11190,7 +11215,7 @@ Applicare la configurazione comunque? - + Error empty parameter. Errore parametro vuoto. @@ -11206,17 +11231,17 @@ Applicare la configurazione comunque? Errore di analisi del file (std::bad_alloc). - + Bad id. Id cattivo. - + File saved File salvato - + untitled.val senzatitolo.val @@ -11228,23 +11253,23 @@ Vuoi salvare i cambiamenti? - + &Undo &Undo - + &Redo &Redo - + Pattern piece: Parte modello: - + Enter a new label for the pattern piece. Inserisci nuova etichetta per la parte del modello. @@ -11263,8 +11288,8 @@ Vuoi salvare i cambiamenti? - - + + File error. Errore nel file. @@ -11273,12 +11298,12 @@ Vuoi salvare i cambiamenti? File caricato - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina non si è spenta correttamente. Vuoi riaprirei file (%1) che avevi aperto? - + Reopen files. Riapri i file. @@ -11291,12 +11316,12 @@ Vuoi salvare i cambiamenti? Misure individuali (*.vit) - + Special point on shoulder Punto speciale sulla spalla - + Triangle tool Strumento triangolo @@ -11305,42 +11330,42 @@ Vuoi salvare i cambiamenti? Punto di intersezione tra arco e linea - + Point from X and Y of two other points Punto da X e Y di due altri punti - + Point intersect line and axis Punto di intersezione tra linea e asse - + Simple curve Curva semplice - + Curved path Tracciato curvo - + Segmenting a simple curve Segmenta una curva semplice - + Segment a curved path Segmenta un tracciato curvo - + Point intersect curve and axis Punto di intersezione tra curva e asse - + Segment an arc Segmenta l'arco @@ -11353,7 +11378,7 @@ Vuoi salvare i cambiamenti? Strumento margine di cucitura - + Union tool Strumento di unione @@ -11362,12 +11387,12 @@ Vuoi salvare i cambiamenti? toolBar - + Last Tool Ultimo Strumento - + Activate last used tool again Attiva l'utlimo strumento utilizzato @@ -11377,33 +11402,33 @@ Vuoi salvare i cambiamenti? Seleziona punto per valore X (verticale) - + Mode Modo - + Pointer Cursore - + Config pattern piece Configura parte modello - + Layout Layout - + Show Curve Details Mostra Dettagli Curva - + Show/hide control points and curve direction Mostra/nascondi punti di controllo e direzione curva @@ -11412,27 +11437,27 @@ Vuoi salvare i cambiamenti? Strumenti - + Point of intersection arcs Punto di intersezione archi - + Point of intersection circles Punto di intersezione cerchi - + Point from circle and tangent Punto da cerchio e tangente - + Point from arc and tangent Punto da arco e tangente - + Arc with given length Arco di data lunghezza @@ -11441,7 +11466,7 @@ Vuoi salvare i cambiamenti? Impostazioni - + Layout pages Layout pagine @@ -11462,27 +11487,27 @@ Vuoi salvare i cambiamenti? Dividi e salva un layout in pagine più piccole - + Print Stampa - + Print tiled PDF Stampa PDF - + Split and print a layout into smaller pages (for regular printers) Dividi e salva un layout in pagine più piccole (per stampanti normali) - + Print preview Anteprima di stampa - + Print preview original layout Anteprima di stampa del layout originale @@ -11491,8 +11516,8 @@ Vuoi salvare i cambiamenti? Esporta Come... - - + + Export original layout Esporta layout originale @@ -11534,7 +11559,7 @@ Vuoi salvare i cambiamenti? - + Layout mode Modalità layout @@ -11543,7 +11568,7 @@ Vuoi salvare i cambiamenti? Non puoi utilizzare ora la modalità Layout. Crea almeno un pezzo, grazie. - + Unsaved changes Modifiche non salvate @@ -11582,12 +11607,12 @@ Vuoi salvare i cambiamenti? Misure standard (*.vst);;Misure individuali (*.vit) - + You can't export empty scene. Non puoi esportare il pannello vuoto. - + Create new Layout Crea nuovo Layout @@ -11619,7 +11644,7 @@ Vuoi salvare i cambiamenti? Il file delle misure contiene misura(e) note come invalide. - + Measurement file has unknown format. Il file delle misure ha un formato sconosciuto. @@ -11646,13 +11671,13 @@ Vuoi salvare i cambiamenti? Impossibile sincronizzare le misure. - + Couldn't update measurements. Impossibile aggiornare le misure. - - + + The measurements file '%1' could not be found. Il file delle misure '%1' non si trova. @@ -11661,7 +11686,7 @@ Vuoi salvare i cambiamenti? Il file delle misure <br/><b>%1</ b><br/> non è stato trovato. Aggiornare la posizione del file - + Loading measurements file File delle misure in carica @@ -11678,9 +11703,9 @@ Vuoi salvare i cambiamenti? Impossibile stabilire la taglia. Il file non è stato aperto. - - - + + + The method %1 does nothing in GUI mode Il metodo %1 non fa nulla in modalità GUI @@ -11697,45 +11722,45 @@ Vuoi salvare i cambiamenti? Impossibile stabilire l'altezza. Il file non è stato aperto. - - - - + + + + Export error. Errore di esportazione. - + Please, provide one input file. Si prega di fornire un di input. - + Print an original layout Stampa un layout originale - + Preview tiled PDF Anteprima di stampa PDF - + Print preview tiled layout Anteprima di stampa del layout piastrellato - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html> <head/> <body> <p> Modalità per lavorare con i pezzi del modello. Questi pezzi del modello sono la base per andare alla fase successiva &quot; dettagli mode&quot;. Prima si sarà in grado di abilitare i &quot; Dettagli mode&quot; devono creare almeno un dettaglio. </p> </body> </html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Modalità per lavorare con i dettagli. Prima di essere in grado di abilitare i &quot;Details mode&quot; è necessario creare almeno un dettaglio &quot;Draw mode&quot;. I dettagli creati in questa fase saranno utilizzati per creare un layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Modalità per creare un layout di dettagli. Questa modalità è disponibile se è stato creato almeno un dettaglio sul piano &quot;Details mode&quot;. Il layout può venire esportato nel tuo formato di file preferito e salvato nel tuo disco rigido.</p></body></html> @@ -11758,7 +11783,7 @@ Vuoi salvare i cambiamenti? Impossibile scaricare misure. Alcune di queste sono utilizzate nel cartamodello. - + True darts Pince precisa @@ -11782,7 +11807,7 @@ Vuoi salvare i cambiamenti? Salva... - + Don't Save Non salvare @@ -11815,7 +11840,7 @@ Vuoi salvare i cambiamenti? Segnala Bug... - + Point intersection curves Punto intersezione curve @@ -11833,7 +11858,7 @@ Vuoi salvare i cambiamenti? Le misure sono state modificate. Vuoi salvare le tue modifiche? - + Curve tool which uses point as control handle Curva con Controlli su Punti @@ -11868,14 +11893,14 @@ Vuoi salvare i cambiamenti? Seleziona uno o più oggetti, <b>Enter</b> - termina creazione - + Rotate objects Ruote oggetti - - - + + + Close pattern Chiudi pezzo @@ -11888,12 +11913,12 @@ Vuoi salvare i cambiamenti? Strumento di puntamento - + Midpoint between two points Punto medio tra due punti - + Group Gruppo @@ -11914,8 +11939,8 @@ Vuoi salvare i cambiamenti? Non puoi utilizzare la modalità Layout adesso. Per favore, inserisci almeno un dettagli nel layout. - - + + Original zoom Zoom originale @@ -11945,22 +11970,22 @@ Vuoi salvare i cambiamenti? Taglia: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? Il file delle misure <br/><br/> <b>%1</b> <br/><br/> non è stato trovato. Vuoi aggiornare la posizione del file? - + Flipping objects by line Capovolgi gli oggetti per linea - + Flipping objects by axis Capovolgi gli oggetti per asse - + Move objects Sposta oggetto @@ -11975,7 +12000,7 @@ Vuoi salvare i cambiamenti? Le misure sono state sincronizzate - + Elliptical Arc Arco Ellittico @@ -11995,89 +12020,89 @@ Vuoi salvare i cambiamenti? Impossibile salvare il file - + read only Sola lettura - + Variables Table Tabella delle variabili - + Contains information about increments and internal variables Contiene informazioni su incrementi e intervalli di variabili - + Load Individual Carica Individuale - + Load Individual measurements file Carica un file di misure individuali - - + + Load Multisize Carica multitaglia - + Load multisize measurements file Carica un file di misure multitaglia - + Open Tape Apri Tape - + Edit Current Modifica corrente - + Edit linked to the pattern measurements Modifica il link alle misure del modello - + Sync Sincronizza - + Synchronize linked to the pattern measurements after change Sincronizza il link alle misure modello dopo averlo cambiato - + Unload Current Rimuovi attuale - + Unload measurements if they were not used in a pattern file Rimuove misure se non sono usate nel disegno - - + + Individual measurements Misure individuali - - + + Multisize measurements Misure multitaglia @@ -12088,7 +12113,7 @@ Vuoi salvare i cambiamenti? File del modello - + Pin tool Strumento spillo @@ -12098,17 +12123,17 @@ Vuoi salvare i cambiamenti? Selezionare punto per spillo - + Insert node tool Inserisci nodo - + Open Tape app for creating or editing measurements file Apri Tape per creare o modificare un file di misure - + Export increments to CSV @@ -12148,143 +12173,143 @@ Vuoi salvare i cambiamenti? Non puoi ancora usare la modalità Layout. - + Zoom fit best current Adatta allo schermo - + zoom fit best current pattern piece Adatta allo schermo questo pezzo di modello - + Export details skiping the Layout stage Esporta dettagli saltando la fase di Layout - + You don't have enough details to export. Please, include at least one detail in layout. Non ci sono abbastanza dettagli da esportare. Per favore, includere almeno un dettaglio nel layout. - + Export details Esporta dettagli - + Can't export details. Impossibile esportare dettagli. - + Label template editor Editor dei modelli di etichetta - + Workpiece tool Strumento crea dettaglio - + Internal path tool Strumento Tracciato Interno - + Save &As… Salva come… - + Report Bug… Segnala errore… - + Export As… Esporta come… - + Save… Salva… - + Final measurements Misure finali - + Export Final Measurements to CSV Esporta Misure Finali a CSV - + You can't export empty scene. Please, include at least one detail in layout. Non puoi esportare un file vuoto. Inserisci almeno un dettaglio nel layout. - + Export final measurements error. Errore nell'esportazione delle misure finali. - + Destination path is empty. Il percorso di destinazione è vuoto. - + Next pattern piece Prossimo pezzo di modello - + Ctrl+PgDown Ctrl+PagGiù - + Previous pattern piece Pezzo di modello precedente - + Ctrl+PgUp Ctrl+PagSu - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool Strumento applica etichetta - + Duplicate detail tool Strumento duplica dettaglio @@ -12294,7 +12319,7 @@ Vuoi salvare i cambiamenti? - + The measurements file '%1' could not be found or provides not enough information. Il file di misure '%1' non è stato trovato o non fornisce abbastanza informazioni. @@ -12314,17 +12339,17 @@ Vuoi salvare i cambiamenti? Modifiche applicate. - + Cannot save settings. Access denied. Impossibile salvare le configurazioni. Accesso negato. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -12348,27 +12373,27 @@ Vuoi salvare i cambiamenti? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -12379,119 +12404,119 @@ Vuoi salvare i cambiamenti? Gruppi di Visibilità - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove Rimuovi - + Edit current - + Editor - + Create or edit a watermark @@ -12501,37 +12526,37 @@ Vuoi salvare i cambiamenti? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update Aggiornamento - + Update manual layout @@ -12557,87 +12582,87 @@ Vuoi salvare i cambiamenti? Seleziona cartella - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -12722,38 +12747,38 @@ Vuoi salvare i cambiamenti? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled senza titolo - + All files Tutti i file - + Save Image - + Visibility group Gruppo di Visibilità - + Show accuracy radius @@ -12797,7 +12822,7 @@ Vuoi salvare i cambiamenti? Impossibile procedere perché non ci sono stampanti disponibili nel sistema. - + unnamed Senza nome @@ -12810,7 +12835,7 @@ Vuoi salvare i cambiamenti? Il layout non è stato aggiornato dall'ultima modifica del pattern. Vuoi continuare? - + Couldn't prepare data for creation layout Impossibile preparare i dati per la creazione del layout @@ -12851,90 +12876,90 @@ Vuoi salvare i cambiamenti? Margini di stampa impossibili da impostare - - + + Can't create a path Impossibile creare tracciato - + Preparing details for layout - + Pattern Modello - + Name Nome - + Value Valore - - - + + + Export final measurements error. Errore nell'esportazione delle misure finali. - + Value in line %1 is infinite or NaN. Please, check your calculations. Il valore nella linea %1 è infinito o NaN. Per favore, controlla i calcoli.ò. - + Parser error at line %1: %2. Errore Parser alla linea %1: %2. - + File error %1. Errore di file %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Uno o più pezzi del modello sono più grandi del formato di carta selezionato. Per favore, selezionare un formato di carta più grande. - + Description Descrizione - + Measurement file has unknown format. Il file delle misure ha un formato sconosciuto. - + File error. Errore nel file. - + Measurement file doesn't include all required measurements. Il file delle misure non include tutte le misure richieste. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -12963,7 +12988,7 @@ Vuoi salvare i cambiamenti? MoveLabel - + move point label muovi l'etichetta del punto @@ -14463,14 +14488,14 @@ Questa opzione sarà effettiva dopo il riavvio del programma. Modifiche applicate. - + Can't convert toUInt parameter - + Can't convert toBool parameter @@ -14481,7 +14506,7 @@ Questa opzione sarà effettiva dopo il riavvio del programma. Hai un parametro vuoto - + Can't convert toDouble parameter @@ -14510,22 +14535,22 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Impossibile calcolare una tacca per il punto '%1' nel pezzo '%2'. Il margine di cucitura non è ancora stato stabilito. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. Impossibile calcolare una tacca per il punto '%1' nel pezzo '%2'. Impossibile trovare una posizione per la tacca. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. Impossibile calcolare una tacca per il punto '%1' nel pezzo '%2'. La tacca collassa. @@ -14535,7 +14560,7 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. Impossibile calcolare una tacca per il punto '%1' nel pezzo '%2'. Impossibile trovare un'intersezione. @@ -14579,13 +14604,13 @@ Questa opzione sarà effettiva dopo il riavvio del programma. Errore Parser: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -14595,7 +14620,7 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -14627,8 +14652,8 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - - + + Passmark '%1' is not part of piece '%2'. @@ -14650,7 +14675,7 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + Can't convert toInt parameter @@ -14662,47 +14687,47 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -14730,39 +14755,39 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -14790,23 +14815,18 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + Cannot set printer margins Margini di stampa impossibili da impostare - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -14854,25 +14874,25 @@ Questa opzione sarà effettiva dopo il riavvio del programma. Vuoi veramente cancellare? - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -14888,13 +14908,13 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -15450,7 +15470,7 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + 0 results @@ -15501,21 +15521,21 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + Name measurement column Nome - + Full name measurement column Nome intero - + Group measurement column Gruppo @@ -15737,7 +15757,7 @@ Questa opzione sarà effettiva dopo il riavvio del programma. - + Import from CSV Importa da CSV @@ -15747,244 +15767,244 @@ Questa opzione sarà effettiva dopo il riavvio del programma. Esporta in CSV - + Show in Finder Mostra nella barra di ricerca - + File '%1' doesn't exist! File '%1' non esiste! - + File error. Errore di file. - + untitled %1 untitled %1 - - + + untitled senza titolo - + read only Sola lettura - - + + Known measurements - + All files Tutti i file - + Could not save the file Impossibile salvare il file - + known measurements - + Save as Salva come - + Failed to lock. This file already opened in another window. Impossibile bloccare. Questo file è già aperto in un'altra finestra. - + Could not save file Impossibile salvare il file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Impossibile bloccare. Questo file è già aperto in un altra finestra. Previsti conflitti quando 2 copie del programma sono in esecuzione. - + Comma-Separated Values Virgola-Valori Separati - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt About Qt - + Empty Vuoto - + File was not saved yet. Il file non è stato ancora salvato. - + Unsaved changes Modifiche non salvate - + Measurements have been modified. Do you want to save your changes? - + Save… Salva… - + Save Salva - + Don't Save Non salvare - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. Impossibile salvare le configurazioni. Accesso negato. - + Empty list Vuoto - + Unknown measurement - + &New Window &New Window - - + + Unnamed image %1 - + Open file Apri il file - + Length units - + Degrees - + None Nessun - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Formula - + Description measurement column Descrizione - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -16393,7 +16413,7 @@ Vuoi salvare le tue modifiche? - + Pattern unit: Unità pattern: @@ -16514,19 +16534,19 @@ Vuoi salvare le tue modifiche? Cancella misura - + unknown gender sconosciuto - + male gender maschio - + female gender femmina @@ -16834,38 +16854,38 @@ Vuoi salvare le tue modifiche? - - + + Name measurement column Nome - - + + Full name measurement column Nome intero - - + + Calculated value measurement column Valore calcolato - + Formula measurement column Formula - + Base value measurement column Valore di base @@ -17069,40 +17089,40 @@ Vuoi salvare le tue modifiche? Nessun - + Invalid link - + Known measurements %1 - - + + Description measurement column Descrizione - - - + + + Shift measurement column - + Empty list Vuoto - - - + + + %1 shift @@ -17119,22 +17139,22 @@ Vuoi salvare le tue modifiche? - + Millimeters - + Inches Pollici - + Centimeters Centimetri - + Degrees @@ -17160,7 +17180,7 @@ Vuoi salvare le tue modifiche? - + 0 results @@ -18320,12 +18340,12 @@ Vuoi salvare le tue modifiche? - + None Nessun - + Known measurements %1 @@ -18634,27 +18654,22 @@ Vuoi salvare le tue modifiche? - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19588,26 +19603,26 @@ Vuoi salvare le tue modifiche? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19692,21 +19707,39 @@ Vuoi salvare le tue modifiche? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19718,12 +19751,12 @@ Vuoi salvare le tue modifiche? VCommandLine - + Path to custom measure file (export mode). Percorso del file di misura personalizzato (modalità di esportazione). - + The measure file Il file di misura @@ -19732,7 +19765,7 @@ Vuoi salvare le tue modifiche? Numero corrispondente al formato di output (default = 0, modalità esportazione) - + Format number Numero formato @@ -19741,18 +19774,18 @@ Vuoi salvare le tue modifiche? Numero corrispondente alla pagina di template (default = 0, export mode): - - + + Template number Numero template - + The page width Larghezza pagina - + The measure unit Unità di misura @@ -19765,7 +19798,7 @@ Vuoi salvare le tue modifiche? Angolo - + Auto crop unused length (export mode). Ritaglio automatico lunghezza inutilizzata (modalità esportazione). @@ -19782,7 +19815,7 @@ Vuoi salvare le tue modifiche? Unità layout (come per la carta eccetto px, modalità esportazione). - + The unit L'unità @@ -19799,7 +19832,7 @@ Vuoi salvare le tue modifiche? Larghezza Gap x2, misurata in unità di layout. (modalità di esportazione). - + The gap width La larghezza del gap @@ -19808,7 +19841,7 @@ Vuoi salvare le tue modifiche? Imposta raggruppamento di layout (modalità di esportazione): - + Grouping type Tipo di raggruppamento @@ -19817,7 +19850,7 @@ Vuoi salvare le tue modifiche? Impossibile usare il formato pagina e misure/unità esplicite della pagina assieme. - + Page height, width, units must be used all 3 at once. Altezza, larghezza e unità della pagina devono essere utilizzate tutte e 3 in una volta. @@ -19832,7 +19865,7 @@ Vuoi salvare le tue modifiche? - + Unsupported paper units. Unità cartacee non supportate. @@ -19842,8 +19875,8 @@ Vuoi salvare le tue modifiche? Unità di layout non supportate. - - + + Export options can be used with single input file only. Le opzioni di esportazione posso venire utilizzate solo con file di input singoli. @@ -19852,17 +19885,17 @@ Vuoi salvare le tue modifiche? Eseguire il programma in modalità di test. Il programma in questa modalità carica un singolo file di pattern ed esce silenziosamente senza visualizzare la finestra principale. La chiave ha priorità prima della chiave '%1'. - + Test option can be used with single input file only. L' opzione test può essere usata solo con file di input singolo. - + The base filename of exported layout files. Use it to enable console export mode. Nome del file base del file di layout esportati. Usalo per abilitare la modalità di esportazione di console. - + The base filename of layout files Il nome del file base dei file di layout @@ -19871,7 +19904,7 @@ Vuoi salvare le tue modifiche? Il percorso della cartella di destinazione output. - + The destination folder La cartella di destinazione @@ -19892,12 +19925,12 @@ Vuoi salvare le tue modifiche? Il valore di altezza - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Larghezza della pagina in unità di misura correnti come 12.0 (non possono venire utilizzate con "%1", modalità di esportazione). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Altezza pagina in unità correnti come 12.0 (non possono venire utilizzate con "%1", modalità di esportazione). @@ -19928,22 +19961,22 @@ Vuoi salvare le tue modifiche? Ignora i margini di stampa (modalità di esportazione). Imposta tutti i margini a 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margine della pagina a sinistra in unità correnti come 3.0 (modalità di esportazione). Ne non impostato verrà utilizzato il valore di default della stampante. O 0 se nessuna stampante viene trovata. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margine della pagina a destra in unità correnti come 3.0 (modalità di esportazione). Se non impostato verrà utilizzato il valore di default della stampante. O 0 se nessuna stampante viene trovata. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Il margine in alto della pagina è 3.0 delle correnti unità (modalità di esportazione). Se non impostato diversamente, verrà utilizzato il valore di default della stampante. O 0 se nonviene trovata alcuna stampante. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Il margine in basso della pagina è 3.0 delle correnti unità (modalità di esportazione). Se non viene impostato in un altro modo, verrà utilizzato il valore di default della stampante. Oppure 0 se non viene trovata alcuna stampante. @@ -19952,32 +19985,32 @@ Vuoi salvare le tue modifiche? La lunghezza dello spostamento deve essere usato con le unità dello spostamento - + Gap width must be used together with shift units. - + Left margin must be used together with page units. Il margine sinistro deve essere usato con le unità della pagina. - + Right margin must be used together with page units. Il margine destro deve essere usato con le unità della pagina. - + Top margin must be used together with page units. Il margine in alto deve essere accompagnato dalle unità della pagina. - + Bottom margin must be used together with page units. Il margine in basso deve essere usato con le unità della pagina. - + The path to output destination folder. By default the directory at which the application was started. @@ -19998,347 +20031,352 @@ Vuoi salvare le tue modifiche? Margine destro della pagina è in unità correnti 3.0 (modalità di esportazione). Se non impostato verrà utilizzato il valore di default della stampante. Oppure 0 se nessuna stampante viene trovata. Se viene utilizzato "%1" il valore verrà ignorato. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Number corresponding to output format (default = 0, export mode): - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. Esporta testo come tracciato. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material Materiale dell'utente - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time Ora - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -20363,47 +20401,47 @@ Vuoi salvare le tue modifiche? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -20413,7 +20451,7 @@ Vuoi salvare le tue modifiche? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -20705,7 +20743,7 @@ Vuoi salvare le tue modifiche? VLayoutConverter - + Could not change version. Impossibile cambiare versione. @@ -20718,73 +20756,73 @@ Vuoi salvare le tue modifiche? - + Cannot set printer page size - + Cannot set printer margins Margini di stampa impossibili da impostare - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 Creare file '%1' respinto! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files files - + Image files File immagini - + tiled - + Numerical control - + Raw Layout Data @@ -20797,12 +20835,12 @@ Vuoi salvare le tue modifiche? VLayoutPiece - + Piece %1 doesn't have shape. Il pezzo %1 non ha una forma. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21106,8 +21144,8 @@ Vuoi salvare le tue modifiche? - - + + Pieces of @@ -21210,12 +21248,12 @@ Vuoi salvare le tue modifiche? VPGraphicsPiece - + Move to - + Remove from Sheet @@ -21231,37 +21269,37 @@ Vuoi salvare le tue modifiche? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -21313,7 +21351,7 @@ Vuoi salvare le tue modifiche? - + Properties @@ -21470,9 +21508,9 @@ Vuoi salvare le tue modifiche? - - - + + + Export Esporta @@ -21522,84 +21560,84 @@ Vuoi salvare le tue modifiche? - + zoom - - + + Scale - + &Open &Apri - + &Save &Salva - + Save &As - + &Import Raw Layout Data - + E&xit U&scita - + &New &Nuovo - + About &Qt About &Qt - + About &Puzzle - + Zoom in Ingrandire - + Zoom out Rimpicciolire - + Zoom 1:1 - + Zoom fit best Zoom migliore adattamento - + Zoom sheet - - + + Preferences Preferenze @@ -21620,7 +21658,7 @@ Vuoi salvare le tue modifiche? - + Could not extract data from file '%1'. %2 @@ -21643,102 +21681,102 @@ Vuoi salvare le tue modifiche? Pollici - + Scale: Scala: - + untitled %1.vlt - + untitled.vlt - + read only Sola lettura - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. Impossibile salvare le configurazioni. Accesso negato. - - - + + + Failed to open file, is it writable? - + &New Window &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Apri il file - + Could not save the file Impossibile salvare il file - + layout - + Save as Salva come - + Failed to lock. This file already opened in another window. Impossibile bloccare. Questo file è già aperto in un'altra finestra. - + Could not save file Impossibile salvare il file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Impossibile bloccare. Questo file è già aperto in un altra finestra. Previsti conflitti quando 2 copie del programma sono in esecuzione. - + Raw Layout files - + About Qt About Qt @@ -21775,13 +21813,13 @@ Vuoi salvare le tue modifiche? - + Horizontal: - + Vertical: @@ -21864,71 +21902,76 @@ Vuoi salvare le tue modifiche? - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print Stampa - - + + Print preview Anteprima di stampa - - + + Print tiled Stampa porzionato - - + + Print preview tiled Anteprima di stampa piastrellata - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove Rimuovi @@ -21939,13 +21982,13 @@ Vuoi salvare le tue modifiche? - + &Undo &Undo - + &Redo &Redo @@ -21956,113 +21999,113 @@ Vuoi salvare le tue modifiche? Pixel - + Unsaved changes Modifiche non salvate - + Save… Salva… - + Save Salva - + Don't Save Non salvare - - + + Can't create a path Impossibile creare tracciato - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. Per stampare documenti con pagine multiple tutti i fogli devono avere la stessa dimensione. - - - - - - - - + + + + + + + + Print error Errore di stampa - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Impossibile procedere perché non ci sono stampanti disponibili nel sistema. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -22072,27 +22115,27 @@ Vuoi salvare le tue modifiche? - + Z value - + Bottom - + Down - + Up - + Top @@ -22102,12 +22145,12 @@ Vuoi salvare le tue modifiche? - + sheet - + Piece %1 invalid. %2 @@ -22248,37 +22291,37 @@ Vuoi salvare le tue modifiche? Errore creando o modificando dettagli - + Error creating or updating single point Errore creando o modificando un singolo punto - - + + Error creating or updating point of end line Errore creando o aggiornando il punto alla fine della linea - - + + Error creating or updating point along line Errore creando o aggiornando punti lungo la linea - - + + Error creating or updating point of shoulder Errore creando o aggiornando punti della spalla - - + + Error creating or updating point of normal - - + + Error creating or updating point of bisector Errore creando o aggiornando punti della bisettrice @@ -22287,128 +22330,128 @@ Vuoi salvare le tue modifiche? Errore creando o aggiornando punti della linea di intersezione - - + + Error creating or updating point of contact Errore creando o aggiornando punti di contatto - + Error creating or updating modeling point Errore creando o aggiornando punti di modellazione - + Error creating or updating height Errore creando o aggiornando altezza - + Error creating or updating triangle Errore creando o aggiornando tringolo - + Error creating or updating point of intersection Errore creando o aggiornando punto di intersezione - - + + Error creating or updating cut spline point - - + + Error creating or updating cut spline path point - - + + Error creating or updating cut arc point Errore creando o aggiornando punti di un arco tagliato - - + + Error creating or updating point of intersection line and axis Errore creando o aggiornando punti di intersezione tra linea e asse - - + + Error creating or updating point of intersection curve and axis Errore creando o aggiornando punti di intersezione tra curva e asse - + Error creating or updating line Errore creando o aggiornando linee - - + + Error creating or updating simple curve Errore creando o aggiornando curve semplici - - + + Error creating or updating curve path Errore creando o aggiornando tracciati curvi - + Error creating or updating modeling simple curve - + Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc Errore creando o aggiornando arco semplice - + Error creating or updating modeling arc - + Error creating or updating union details - + Error creating or updating point of intersection arcs Errore creando o aggiornando punto di intersezione di archi - + Error creating or updating point of intersection circles Errore creando o aggiornando punti di intersezione di cerchi - + Error creating or updating point from circle and tangent Errore creando o aggiornando il punto di intersezione tra cerchio e tangente - + Error creating or updating point from arc and tangent Errore creando o aggiornando il punto tra arco e tangente - + Error creating or updating true darts @@ -22425,17 +22468,17 @@ Vuoi salvare le tue modifiche? - + Unknown spline type '%1'. - + Unknown arc type '%1'. - + Unknown tools type '%1'. @@ -22445,75 +22488,75 @@ Vuoi salvare le tue modifiche? Errore nome non unico. - + Error creating or updating point of intersection curves Errore creando o aggiornando punti di intersezione tra curve - + Error creating or updating simple interactive spline - + Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation Errore creando o aggiornando operazioni di rotazione - + Unknown operation type '%1'. - + Error creating or updating operation of flipping by line Errore creando o aggiornando operazioni di rotazione attraverso una linea - + Error creating or updating operation of flipping by axis Errore creando o aggiornando operazione di rotazione attraverso un'asse - - + + Error creating or updating operation of moving Errore creando o aggiornando operazioni di movimento - + Error creating or updating point of line intersection Errore creando o aggiornando punti della linea di intersezione - - + + Error creating or updating simple elliptical arc Errore creando o aggiornando un arco ellittico semplice - + Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc @@ -22523,34 +22566,34 @@ Vuoi salvare le tue modifiche? Dettaglio - + Unnamed path Tracciato senza nome - - + + Error creating or updating a piece path - + Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -24313,108 +24356,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance Margine di cucitura corrente - + move pattern piece label Sposta l'etichetta pezzo del modello - + resize pattern piece label Ridimensiona l'etichetta pezzo del modello - + rotate pattern piece label Ruota l'etichetta pezzo del modello - + move pattern info label Sposta l'etichetta info del modello - + resize pattern info label Ridimensiona l'etichetta info del modello - + rotate pattern info label Ruota l'etichetta info del modello - + move grainline Muovi drittofilo - + resize grainline Ridimensiona drittofilo - + rotate grainline Ruota drittofilo - + Options Opzioni - + In layout In layout - + Hide main path Nascondi percorso primario - + Reset piece label template - + Delete Elimina - + apply save detail options Salva opzioni dettaglio - + multi deletion - + Forbid flipping Vieta la rotazione - + Force flipping Forza la rotazione - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_nl_NL.ts b/share/translations/valentina_nl_NL.ts index d8810f073..2881faf6f 100644 --- a/share/translations/valentina_nl_NL.ts +++ b/share/translations/valentina_nl_NL.ts @@ -1296,22 +1296,22 @@ Move on top - + Verplaats naar bovenaan Move up - Verplaats naar boven + Verplaats naar boven Move down - Verplaats naar beneden + Verplaats naar beneden Move on bottom - Verplaats naar onderaan + Verplaats naar onderaan @@ -4767,40 +4767,40 @@ Het proces van het kiezen van het volgende werkstuk - + Three groups: big, middle, small Drie groepen: groot, middel en klein - + Two groups: big, small Twee groepen: groot, klein - + Descending area Kleiner wordend gebied - - + + Millimiters Millimiters - - + + Centimeters Centimeters - - + + Inches Inches - + Pixels Pixels @@ -4810,22 +4810,22 @@ Maak een opmaak - + Auto crop unused length Automatisch inkorten van ongebruikte lengte - + Unite pages (if possible) Voeg pagina's samen( wanneer mogeljk) - + Gap width: Tussenruimte: - + Save length of the sheet Sla de lengte van het blad op @@ -4907,7 +4907,7 @@ Op maat - + Wrong fields. Verkeerde velden. @@ -4920,7 +4920,7 @@ Apply settings anyway? Toch de instellingen aanpassen? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4931,7 +4931,7 @@ Toch de instellingen aanpassen? Kleiner wordende ruimte = 2 - + Layout options Opmaak opties @@ -4940,7 +4940,7 @@ Toch de instellingen aanpassen? Verschuivings/Offset lengte: - + Rule for choosing the next workpiece Regel voor het kiezen van het volgende werkstuk @@ -4949,17 +4949,17 @@ Toch de instellingen aanpassen? Het mogelijk maken om van grote afmetingen van papier het creatieproces te versnellen. - + Divide into strips Verdeel in strepen - + Multiplier Vermenigvuldiger - + Set multiplier for length of the biggest workpiece in layout. Stel vermenigvuldiger in op de lengte van het grootste werkstuk in de opmaak. @@ -4968,7 +4968,7 @@ Toch de instellingen aanpassen? x - + Enabling for sheets that have big height will speed up creating. Het mogelijk maken om van grote afmetingen van papier het creatieproces te versnellen. @@ -4978,7 +4978,7 @@ Toch de instellingen aanpassen? Printer: - + None Printer Geen @@ -5009,7 +5009,7 @@ Toch de instellingen aanpassen? Negeer marges - + Margins go beyond printing. Apply settings anyway? @@ -5018,63 +5018,78 @@ Apply settings anyway? Toch de instellingen aanpassen? - + Follow grainline Langs de recht-van-draad - + Time: Tijd: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. Tijd toegekend aan het algoritme om de beste opmaak te vinden. - + Efficiency: Efficiëntie: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority Manuele voorrang - + Nest quantity of copies according to piece settings. Inpas hoeveelheid van de kopiëen volgens de instellingen van het stuk. - + Nest quantity Inpas hoeveelheid - + Auto crop unused width Automatisch inkorten van ongebruikte breedte - + Prefer one sheet solution Verkies een 1-blad oplossing - + min minutes min - + Enable this option to prefer getting one sheet solutions. Deze optie aanzetten om 1-blad oplossingen te verkrijgen. @@ -8146,7 +8161,7 @@ Toch de instellingen aanpassen? Sla opmaak op - + File name: Bestand naam: @@ -8183,8 +8198,8 @@ Toch de instellingen aanpassen? Selecteer pad naar doelman - - + + File base name Basis bestandsnaam @@ -8218,37 +8233,42 @@ Toch de instellingen aanpassen? + Boundary together with notches + + + + Not available options - + Margins Marges - + Right: Rechts: - + Left: Links: - + Top: Bovenaan: - + Bottom: Onderaan: - + Paper format Papier formaat @@ -8258,20 +8278,20 @@ Toch de instellingen aanpassen? Doorbladeren… - - - - + + + + cm cm - + Templates: Sjablonen: - + Orientation: Orientatie: @@ -8281,17 +8301,17 @@ Toch de instellingen aanpassen? Opties - + Scale Schaal - + Horizontal: Horizontaal: - + Vertical: Vertikaal: @@ -9806,22 +9826,22 @@ Toch de instellingen aanpassen? Move on top - + Verplaats naar bovenaan Move up - Verplaats naar boven + Verplaats naar boven Move down - Verplaats naar beneden + Verplaats naar beneden Move on bottom - Verplaats naar onderaan + Verplaats naar onderaan @@ -10647,27 +10667,27 @@ Toch de instellingen aanpassen? Punt - + Point along perpendicular Loodlijn met punt - + Perpendicular point along line Haakse hoek punt langs lijn - + Point along bisector Punt langs bissectrice - + Point at distance and angle Punt op afstand en hoek - + Point at distance along line Punt op afstand langs lijn @@ -10680,12 +10700,12 @@ Toch de instellingen aanpassen? Lijn - + Line between points Lijn tussen punten - + Point at line intersection Punt op lijnkruising @@ -10702,7 +10722,7 @@ Toch de instellingen aanpassen? Gereedschap voor het maken van bogen. - + Arc Boog @@ -10730,210 +10750,215 @@ Toch de instellingen aanpassen? &Patroondeel - + Measurements Maten - + Window Venster - + Toolbar files Werkbalk bestanden - + ToolBar modes Werkbalk modus - + Toolbar pattern Werkbalk patroon - + Toolbar options Werkbalk opties - + Toolbar tools Werkbalk gereedschappen - + Tool options Gereedschap opties - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Nieuw - + &New &Nieuw - + Create a new pattern Maak een nieuw patroon - + Open Open - + &Open &Open - + Open file with pattern Open bestand met patroon - - + + Save Opslaan - + &Save &Opslaan - + Save pattern Opslaan patroon - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Opslaan &als... - + Save not yet saved pattern Sla nog niet opgeslagen patroon op - + Draw Teken - + Details Details - + Pointer tools Aanwijzer gereedschap - + New pattern piece Nieuw patroondeel - + Add new pattern piece Voeg nieuw patroondeel toe - + Change the label of pattern piece Verander het label van patroondeel @@ -10946,57 +10971,57 @@ Toch de instellingen aanpassen? Tabellen van variabelen - - + + History Geschiedenis - + About &Qt Over &Qt - + &About Valentina &Over Valentina - + E&xit E&xit - + Exit the application Stop met de toepassing - + Preferences Voorkeuren - + Pattern properties Patroon eigenschappen - - + + Zoom in Inzoomen - + zoom in inzoomen - - - + + + Zoom out Uitzoomen @@ -11013,7 +11038,7 @@ Toch de instellingen aanpassen? Originele Zoom - + Zoom fit best Zoom naar best passend @@ -11030,7 +11055,7 @@ Toch de instellingen aanpassen? Rapporteer fout... - + Report bug Rapporteer fout @@ -11047,8 +11072,8 @@ Toch de instellingen aanpassen? Toon online help - - + + Pattern piece %1 Patroondeel %1 @@ -11141,7 +11166,7 @@ Toch de instellingen aanpassen? Selecteer een kromming - + About Qt Over Qt @@ -11181,7 +11206,7 @@ Toch de instellingen aanpassen? - + Open file Open bestand @@ -11198,7 +11223,7 @@ Toch de instellingen aanpassen? - + Error empty parameter. Fout. Lege parameter. @@ -11214,17 +11239,17 @@ Toch de instellingen aanpassen? Fout bij opsplitsen bestand (std::bad_alloc). - + Bad id. Slechte id. - + File saved Bestand opgeslagen - + untitled.val naamloos.val @@ -11235,23 +11260,23 @@ Do you want to save your changes? - + &Undo &Ongedaan maken - + &Redo &Opnieuw - + Pattern piece: Patroondeel: - + Enter a new label for the pattern piece. Schrijf een nieuw label voor het patroondeel. @@ -11270,8 +11295,8 @@ Do you want to save your changes? - - + + File error. Bestandsfout. @@ -11280,12 +11305,12 @@ Do you want to save your changes? Bestand geladen - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina is niet correct gesloten. Wil je de geopende bestanden(%1) heropenen? - + Reopen files. Heropen bestanden. @@ -11298,12 +11323,12 @@ Do you want to save your changes? Individuele maten (*.vit) - + Special point on shoulder Speciaal punt op schouder - + Triangle tool Driehoek gereedschap @@ -11312,42 +11337,42 @@ Do you want to save your changes? Kruispunt van boog en lijn - + Point from X and Y of two other points Punt van X en Y van twee andere punten - + Point intersect line and axis Kruispunt lijn en aslijn - + Simple curve Simpele kromming - + Curved path Krommingspad - + Segmenting a simple curve Opsplitsing van een simpele kromming - + Segment a curved path Opsplitsing van een krommingspad - + Point intersect curve and axis Kruispunt kromming en aslijn - + Segment an arc Opsplitsen van een boog @@ -11360,7 +11385,7 @@ Do you want to save your changes? Naadtoeslag gereedschap - + Union tool Samenvoegend gereedschap @@ -11369,12 +11394,12 @@ Do you want to save your changes? Werkbalk - + Last Tool Laatste gereedschap - + Activate last used tool again Activeer laatst gebruikte gereedschap @@ -11384,33 +11409,33 @@ Do you want to save your changes? Selecteer punt voor X waarde (verticaal) - + Mode Modus - + Pointer Aanwijzer - + Config pattern piece Configureer patroondeel - + Layout Opmaak - + Show Curve Details Toon kromming details - + Show/hide control points and curve direction Toon/verberg controle punten en kromming richting @@ -11419,27 +11444,27 @@ Do you want to save your changes? Gereedschappen - + Point of intersection arcs Kruispunt van bogen - + Point of intersection circles Kruispunt van cirkels - + Point from circle and tangent Kruispunt van cirkel en raaklijn - + Point from arc and tangent Kruispunt van boog en raaklijn - + Arc with given length Boog met gegeven lengte @@ -11448,7 +11473,7 @@ Do you want to save your changes? Instellingen - + Layout pages Opmaak pagina's @@ -11469,27 +11494,27 @@ Do you want to save your changes? Verdeel en sla een opmaak op in kleinere pagina's - + Print Afdrukken - + Print tiled PDF Druk gestapelde PDF af - + Split and print a layout into smaller pages (for regular printers) Verdeel en sla een opmaak op in kleinere pagina's ( voor normale printers) - + Print preview Druk voorbeeldweergave af - + Print preview original layout Druk voorbeeldweergave van originele opmaak af @@ -11498,8 +11523,8 @@ Do you want to save your changes? Export als... - - + + Export original layout Export originele opmaak @@ -11541,7 +11566,7 @@ Do you want to save your changes? - + Layout mode Opmaak modus @@ -11550,7 +11575,7 @@ Do you want to save your changes? U kunt de Opmaak modus nu niet gebruiken. Alstublieft, creëer tenminste éen werkstuk. - + Unsaved changes Niet opgeslagen veranderingen @@ -11589,12 +11614,12 @@ Do you want to save your changes? Standaard maten(*.vst);;Individuele maten(*.vit) - + You can't export empty scene. U kunt geen lege beelden exporteren. - + Create new Layout Maak een nieuwe opmaak @@ -11626,7 +11651,7 @@ Do you want to save your changes? Maten bestand bevat ongeldige bekende ma(a)t(en). - + Measurement file has unknown format. Maten bestand heeft een onbekende indeling. @@ -11653,13 +11678,13 @@ Do you want to save your changes? Kan maten niet synchroniseren. - + Couldn't update measurements. Kan maten niet bijwerken. - - + + The measurements file '%1' could not be found. Het maten bestand '%1' kon niet gevonden worden. @@ -11668,7 +11693,7 @@ Do you want to save your changes? Het maten bestand<br/><br/> <b>%1</b> <br/><br/> kon niet gevonden worden. Wil je de bestanden locatie bijwerken? - + Loading measurements file Laden maten bestand @@ -11685,9 +11710,9 @@ Do you want to save your changes? Kon maat niet instellen. Bestand was niet geopend. - - - + + + The method %1 does nothing in GUI mode De methode %1 werkt niet in GUI modus @@ -11704,45 +11729,45 @@ Do you want to save your changes? Kon hoogte niet instellen. Bestand was niet geopend. - - - - + + + + Export error. Export fout. - + Please, provide one input file. Alsublieft, verstrek éen invoer bestand. - + Print an original layout Druk een originele opmaak af - + Preview tiled PDF Bekijk vooraf gestapelde PDF - + Print preview tiled layout Voorbeeldweergave gestapelde opmaak - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Modus voor het werken met patroon delen. Deze patroondelen zijn de basis om naar de volgende fase te gaan &quote; Details modus&quote;. Voor het mogelijk maken van de &quote;Details modus&quote; moet je op zijn minst een detail maken.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Modus voor het werken met details. Voordat het mogelijk is om &quote; Details modus&quote;. uit te voeren, moet je in ieder geval een detail creeren op het werkgebied &quote;Draw modus&quote; Details die op dit werkgebied gemaakt zijn worden gebruikt voor het creëren van een layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/> <body><p>Modus voor het maken van een lay-out van details. Deze modus is beschikbaar als ten minste één detail in het werkgebied is gemaakt. &quot;Details mode&quot;.De lay-out kan worden geëxporteerd naar de bestandsindeling van uw voorkeur en opgeslagen naar uw harddrive.</p></body></html> @@ -11765,7 +11790,7 @@ Do you want to save your changes? kan maten niet ontladen. Sommigen worden gebruikt in het patroon. - + True darts Coupenaden @@ -11789,7 +11814,7 @@ Do you want to save your changes? Sla op... - + Don't Save Niet opslaan @@ -11822,7 +11847,7 @@ Do you want to save your changes? Rapporteer fout... - + Point intersection curves Kruispunt krommingen @@ -11840,7 +11865,7 @@ Do you want to save your changes? Maten zijn veranderd. Wil je nu maten synchroniseren? - + Curve tool which uses point as control handle Kromming met een punt als controle knop @@ -11875,14 +11900,14 @@ Do you want to save your changes? Selecteer een of meer objecten, <b>Enter</b> - voltooi creatie - + Rotate objects Draai objecten - - - + + + Close pattern Sluit patroon @@ -11895,12 +11920,12 @@ Do you want to save your changes? Aanwijzer - + Midpoint between two points Middelpunt tussen 2 punten - + Group Groep @@ -11921,8 +11946,8 @@ Do you want to save your changes? U kunt de Opmaak modus nu niet gebruiken. Alstublieft, zorg dat er minimaal een detail is in de opmaak. - - + + Original zoom Originele zoom @@ -11952,22 +11977,22 @@ Do you want to save your changes? Maat: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? Het maten bestand<br/><br/> <b>%1</b> <br/><br/> kon niet gevonden worden. Wil je de bestanden locatie bijwerken? - + Flipping objects by line Kantelen t.o.v. lijn - + Flipping objects by axis Kantelen t.o.v. aslijn - + Move objects Verplaatsen @@ -11986,7 +12011,7 @@ Do you want to save your changes? Maten zijn gesynchroniseerd - + Elliptical Arc Ellipsvormige boog @@ -12006,89 +12031,89 @@ Do you want to save your changes? Het bestand is niet bewaard - + read only alleen lezen - + Variables Table Tabel met variabelen - + Contains information about increments and internal variables Bevat informatie over vergroten/verkleinen en interne variabelen - + Load Individual Laad individueel - + Load Individual measurements file Laad het individuele matenbestand - - + + Load Multisize Laad multimaten - + Load multisize measurements file Laad het multimaten maten bestand - + Open Tape Open Tape - + Edit Current Wijzig huidige - + Edit linked to the pattern measurements Wijziging gerelateerd aan patroon-maten - + Sync Synchroniseer - + Synchronize linked to the pattern measurements after change Synchroniseer maten gelinked aan het patroon na wijziging - + Unload Current Verwijder huidige - + Unload measurements if they were not used in a pattern file Laad maten niet als ze niet gebruikt worden in een patroon-bestand - - + + Individual measurements Individuele maten - - + + Multisize measurements Multimaten maten @@ -12099,7 +12124,7 @@ Do you want to save your changes? Patroonbestanden - + Pin tool Pin @@ -12109,17 +12134,17 @@ Do you want to save your changes? Selecteer de pinpunten - + Insert node tool Voeg knooppunt toe - + Open Tape app for creating or editing measurements file Open de Tape app om een matenbestand te wijzigen of aan te maken - + Export increments to CSV Exporteer verkleining/vergroting naar CSV @@ -12159,143 +12184,143 @@ Do you want to save your changes? Je kunt opmaak mode nog niet gebruiken. - + Zoom fit best current Best passende zoom - + zoom fit best current pattern piece Best passende zoom voor huidig patroondeel - + Export details skiping the Layout stage Exporteer de details en sla Opmaak stadium over - + You don't have enough details to export. Please, include at least one detail in layout. Er zijn te weinig details om te exporteren. Alstublieft, zorg dat er ten minste een detail in Opmaak bevat. - + Export details Exporteer details - + Can't export details. Kan geen details exporteren. - + Label template editor Label sjabloon bewerker - + Workpiece tool Werkstuk gereedschap - + Internal path tool Binnenlijnen tekenen - + Save &As… Opslaan &als… - + Report Bug… Rapporteer fout… - + Export As… Exporteer als… - + Save… Opslaan… - + Final measurements Uiteindelijke maten - + Export Final Measurements to CSV Exporteer uiteindelijke maten naar CSV - + You can't export empty scene. Please, include at least one detail in layout. U kunt geen lege scenes exporteren. A.u.b, betrek tenminste één detail in de opmaak. - + Export final measurements error. Exporteer uiteindelijke maten fout. - + Destination path is empty. Bestemmings pad is leeg. - + Next pattern piece Volgend patroondeel - + Ctrl+PgDown Ctrl+PgDown - + Previous pattern piece Vorig patroondeel - + Ctrl+PgUp Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool Plaats label - + Duplicate detail tool Dupliceer detail gereedschap @@ -12305,7 +12330,7 @@ Do you want to save your changes? Selecteer middelpunt labelplaats - + The measurements file '%1' could not be found or provides not enough information. Het maten bestand '%1' kon niet gevonden worden of geeft niet genoeg informatie. @@ -12325,17 +12350,17 @@ Do you want to save your changes? Wijzigingen zijn toegepast. - + Cannot save settings. Access denied. Kan instellingen niet opslaan. Toegang geweigerd. - + Ctrl+O Ctrl+O - + Cannot read settings from a malformed .INI file. Kan instellingen niet inlezen wegens een niet-conform .INI-bestand. @@ -12359,27 +12384,27 @@ Do you want to save your changes? Selecteer één of meer objecten, houd <b>%1</b> vast - voor meerdere selecties, <b>%2</b> - bevestig selectie - + Point of intersection circle and segment Kruispunt van cirkel en segment - + Increase label font Vergroot fontgrootte label - + Decrease label font Verklein fontgrootte label - + Original label font Originele label fontgrootte - + Hide labels Verberg labels @@ -12390,119 +12415,119 @@ Do you want to save your changes? Zichtbaarheid van groepen - - + + Export recipe Exporteer recept - + Recipe files Recept bestanden - + recipe Recept - + Could not save recipe. %1 Kon het recept %1 niet bewaren - + Curved path tool which uses point as control handle Krommingpad met een punt als controle knop - + Point of intersection arc and axis Kruispunt boog en aslijn - + Show main path Toon hoofdpad - + Globally show pieces main path Toon globaal het hoofdpad van stukken - - + + Pattern messages Patroon berichten - + Clear all messages Wis alle berichten - + Filter Filter - + DEBUG DEBUG - + WARNING VERWITTIGING - + CRITICAL KRITIEK - + FATAL FATAAL - + INFO INFO - + Auto refresh the list with each parse Hervul de lijst automatisch na elke opsplitsing - + Watermark Watermerk - + Load Laden - + Remove Verwijder - + Edit current Bewerk huidig - + Editor Editor - + Create or edit a watermark Maak of wijzig een watermerk @@ -12512,37 +12537,37 @@ Do you want to save your changes? Watermerk bestanden - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update Opwaardering - + Update manual layout @@ -12568,87 +12593,87 @@ Do you want to save your changes? Selecteer map - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. Niet ondersteunde dimensie A waarde '%1' voor dit patroonbestand. - + Couldn't set dimension A. Need a file with multisize measurements. Kan dimensie A niet instellen. Heb een bestand nodig met multimaat maten metingen. - + Couldn't set dimension A. File wasn't opened. Kan dimensie A niet instellen. Bestand was niet geopend. - + Not supported dimension B value '%1' for this pattern file. Niet ondersteunde dimensie B waarde '%1' voor dit patroonbestand. - + Couldn't set dimension B. Need a file with multisize measurements. Kan dimensie B niet instellen. Heb een bestand nodig met multimaat maten metingen. - + Couldn't set dimension B. File wasn't opened. Kan dimensie B niet instellen. Bestand was niet geopend. - + Not supported dimension C value '%1' for this pattern file. Niet ondersteunde dimensie C waarde '%1' voor dit patroonbestand. - + Couldn't set dimension C. Need a file with multisize measurements. Kan dimensie C niet instellen. Heb een bestand nodig met multimaat maten metingen. - + Couldn't set dimension C. File wasn't opened. Kan dimensie C niet instellen. Bestand was niet geopend. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files Scalable Vector Graphics bestanden - + Save draw - + Draw export - + Background images - + Add background image @@ -12733,38 +12758,38 @@ Do you want to save your changes? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled naamloos - + All files Alle bestanden - + Save Image - + Visibility group Zichtbaarheid groep - + Show accuracy radius @@ -12808,7 +12833,7 @@ Do you want to save your changes? Kan niet verder gaan omdat er geen beschikbare printers in het systeem zijn. - + unnamed naamloos @@ -12821,7 +12846,7 @@ Do you want to save your changes? De opmaak is niet meer bijgewerkt sinds de laatste veranderingen. Wilt u verder gaan? - + Couldn't prepare data for creation layout Kon geen data voorbereiden om opmaak te creëren @@ -12862,90 +12887,90 @@ Do you want to save your changes? Kan de printer marges niet bepalen - - + + Can't create a path Kan geen pad maken - + Preparing details for layout Details voorbereiden voor opmaak - + Pattern Patroon - + Name Naam - + Value Waarde - - - + + + Export final measurements error. Exporteer uiteindelijke maten fout. - + Value in line %1 is infinite or NaN. Please, check your calculations. Waarde in lijn %1 is oneindig of NaN. A.u.b., controleer uw berekeningen. - + Parser error at line %1: %2. Opsplitsfout op lijn %1: %2. - + File error %1. Bestandsfout %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Een of meer patroondeel zijn groter dan het papierformaat welke je hebt geselecteerd. Kies a.u.b. een groter formaat papier. - + Description Beschrijving - + Measurement file has unknown format. Maten bestand heeft een onbekende indeling. - + File error. Bestandsfout. - + Measurement file doesn't include all required measurements. Maten bestand bevat niet alle benodigde maten. - + Please, additionally provide: %1 Alstublieft, verstrek extra: %1 - + Timeout. Time-out. - + Process has been stoped because of exception. Proces werd onderbroken ten gevolge van een uitzondering. @@ -12974,7 +12999,7 @@ Do you want to save your changes? MoveLabel - + move point label verplaats punt label @@ -14474,14 +14499,14 @@ Deze optie wordt actief na een herstart.. Wijzigingen zijn toegepast. - + Can't convert toUInt parameter Kan parameter toUlnt niet converteren - + Can't convert toBool parameter Kan de parameter toBool niet converteren @@ -14492,7 +14517,7 @@ Deze optie wordt actief na een herstart.. Kreeg een lege parameter - + Can't convert toDouble parameter @@ -14521,22 +14546,22 @@ Deze optie wordt actief na een herstart.. Gebruikers materiaal nummer %1 is niet gedefineerd in dit patroon. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Kan geen inkeping berekenen voor punt '%1' in patroondeel '%2'. Naadtoeslag is leeg. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. Kan geen inkeping berekenen voor punt '%1' in patroondeel '%2'. Vind geen positie voor de inkeping. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. Kan geen inkeping berekenen voor punt '%1' in patroondeel '%2'. Kan geen inkeping positie plaatsen. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. Kan geen inkeping berekenen voor punt '%1' in patroondeel '%2'. Inkeping mislukt. @@ -14546,7 +14571,7 @@ Deze optie wordt actief na een herstart.. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. Kan geen inkeping berekenen voor punt '%1' in patroondeel '%2'. Vind geen positie kruispunt. @@ -14590,13 +14615,13 @@ Deze optie wordt actief na een herstart.. Fout bij opsplitsen: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. Patroondeel '%1' heeft een ongeldige opmaak naadtoeslag. Gelieve de naadtoeslag na te gaan om te zien hoe ze zich gedraagt. - - + + Piece '%1'. Seam allowance is not valid. Naadtoslag van patroondeel '%1' is niet geldig. @@ -14606,7 +14631,7 @@ Deze optie wordt actief na een herstart.. Vond een null inkeping voor punt '%1' in werkstuk '%2'. Lengte is kleiner dan de minimale toegelaten. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. Kan geen inkeping berekenen voor punt '%1' in werkstuk '%2' met de ingebouwde naadtoeslag. Gebruiker moet manueel de lengte ingeven. @@ -14638,8 +14663,8 @@ Deze optie wordt actief na een herstart.. Kan de lengte van de pasmarkering voor punt '%1' niet berekenen. Reden: %2. - - + + Passmark '%1' is not part of piece '%2'. Pasmarkering '%1' maakt geen deel uit van patroondeel '%2'. @@ -14661,7 +14686,7 @@ Deze optie wordt actief na een herstart.. Ongeldige formule '%1' voor gereedschap met id '%2'. %3. - + Can't convert toInt parameter @@ -14673,47 +14698,47 @@ Deze optie wordt actief na een herstart.. Deel naam '%1' is niet uniek. - + Could not find the segment start. Kon het segment begin niet vinden. - + Could not find the segment end. Kon het segement einde niet vinden. - + Segment is too short. Segment is te kort. - + Error calculating segment for curve '%1'. %2 Fout bij berekenen segment voor boog '%1'. %2  - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 Fout in pad '%1'. Berekening van segment voor boog '%2' is mislukt. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. Kan de ingebouwde pasmarkering '%1' voor werkstuk '%2' niet voorbereiden. Pasmarkering is leeg. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. Kan de ingebouwde pasmarkering '%1' voor werkstuk '%2' niet voorbereiden. Basislijn pasmarkering is leeg. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. Kan de pasmarkering '%1' voor werkstuk '%2' niet voorbereiden. Basislijn pasmarkering is leeg. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. Kan de pasmarkering '%1' voor werkstuk '%2' niet voorbereiden. Pasmarkering is leeg. @@ -14741,39 +14766,39 @@ Deze optie wordt actief na een herstart.. - + No data for the height dimension. Geen gegevens voor de lengte. - + No data for the size dimension. Geen gegevens voor de grootte. - + No data for the hip dimension. Geen gegevens voor de heup omvang. - + No data for the waist dimension. Geen gegevens voor de taille. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -14801,23 +14826,18 @@ Deze optie wordt actief na een herstart.. - + Cannot set printer margins Kan de printer marges niet bepalen - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -14865,25 +14885,25 @@ Deze optie wordt actief na een herstart.. Wil je dit echt verwijderen? - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -14899,13 +14919,13 @@ Deze optie wordt actief na een herstart.. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -15461,7 +15481,7 @@ Deze optie wordt actief na een herstart.. - + 0 results @@ -15512,21 +15532,21 @@ Deze optie wordt actief na een herstart.. - + Name measurement column Naam - + Full name measurement column Volledige naam - + Group measurement column Groep @@ -15748,7 +15768,7 @@ Deze optie wordt actief na een herstart.. - + Import from CSV Importeer van CSV @@ -15758,244 +15778,244 @@ Deze optie wordt actief na een herstart.. Exporteer naar CSV - + Show in Finder Toon in Finder - + File '%1' doesn't exist! Bestand '%1' bestaat niet! - + File error. Bestandsfout. - + untitled %1 naamloos %1 - - + + untitled naamloos - + read only alleen lezen - - + + Known measurements - + All files Alle bestanden - + Could not save the file Het bestand is niet bewaard - + known measurements - + Save as Opslaan als - + Failed to lock. This file already opened in another window. Afsluiten is mislukt. Dit bestand is al geopend in een ander venster. - + Could not save file Kon bestand niet opslaan - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Afsluiten is mislukt. Dit bestand is al geopend in een ander venster. Verwacht een conflict als 2 kopieën van het programma gaan lopen. - + Comma-Separated Values Komma-scheidingsteken waardes - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt Over Qt - + Empty Leeg - + File was not saved yet. Bestand was nog niet opgeslagen. - + Unsaved changes Niet opgeslagen veranderingen - + Measurements have been modified. Do you want to save your changes? - + Save… Opslaan… - + Save Opslaan - + Don't Save Niet opslaan - + Cannot read settings from a malformed .INI file. Kan instellingen niet inlezen wegens een niet-conform .INI-bestand. - + Cannot save settings. Access denied. Kan instellingen niet opslaan. Toegang geweigerd. - + Empty list Leeg - + Unknown measurement - + &New Window &Nieuw Venster - - + + Unnamed image %1 - + Open file Open bestand - + Length units - + Degrees Graden - + None Geen - + Measurement name is empty. - + Imported file must not contain the same name twice. Geïmporteerd bestand mag geen tweemaal dezelfde naam bevatten. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Formule - + Description measurement column Beschrijving - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. Individuele maten vereisen ten minste 2 kolommen. @@ -16404,7 +16424,7 @@ Wil je deze veranderingen opslaan? - + Pattern unit: De patroon eenheid: @@ -16525,19 +16545,19 @@ Wil je deze veranderingen opslaan? Verwijder maten - + unknown gender onbekend - + male gender mannelijk - + female gender vrouwelijk @@ -16845,38 +16865,38 @@ Wil je deze veranderingen opslaan? - - + + Name measurement column Naam - - + + Full name measurement column Volledige naam - - + + Calculated value measurement column Berekende waarde - + Formula measurement column Formule - + Base value measurement column Basis waarde @@ -17080,40 +17100,40 @@ Wil je deze veranderingen opslaan? Geen - + Invalid link - + Known measurements %1 - - + + Description measurement column Beschrijving - - - + + + Shift measurement column - + Empty list Leeg - - - + + + %1 shift %1 shift @@ -17130,22 +17150,22 @@ Wil je deze veranderingen opslaan? Kan de basiswaarde niet naar het dubbele omzetten in kolom %1. - + Millimeters Millimeters - + Inches Inches - + Centimeters Centimeters - + Degrees Graden @@ -17171,7 +17191,7 @@ Wil je deze veranderingen opslaan? - + 0 results @@ -18331,12 +18351,12 @@ Wil je deze veranderingen opslaan? - + None Geen - + Known measurements %1 @@ -18650,27 +18670,22 @@ Wil je deze veranderingen opslaan? Kan deze vrijevormkromming niet knippen - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19604,26 +19619,26 @@ Wil je deze veranderingen opslaan? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19708,21 +19723,39 @@ Wil je deze veranderingen opslaan? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19734,12 +19767,12 @@ Wil je deze veranderingen opslaan? VCommandLine - + Path to custom measure file (export mode). Pad naar gebruikelijke maten bestand (export modus). - + The measure file Het maten bestand @@ -19748,7 +19781,7 @@ Wil je deze veranderingen opslaan? Nummer behorend bij de uitkomst indeling( standaardinstelling = 0, export modus): - + Format number Indeling nummer @@ -19757,18 +19790,18 @@ Wil je deze veranderingen opslaan? Nummer behorende bij de pagina sjabloon( standaardinstelling = 0, export modus): - - + + Template number Sjabloon nummer - + The page width De pagina breedte - + The measure unit De maten eenheid @@ -19781,7 +19814,7 @@ Wil je deze veranderingen opslaan? Hoek - + Auto crop unused length (export mode). Automatisch inkorten van ongebruikte lengte (export modus). @@ -19798,7 +19831,7 @@ Wil je deze veranderingen opslaan? Opmaak eenheden (als van een papier behalve px, export modus). - + The unit De eenheid @@ -19815,7 +19848,7 @@ Wil je deze veranderingen opslaan? Tussenruimte x2, gemeten in opmaak eenheden (export modus). - + The gap width De tussenruimte @@ -19824,7 +19857,7 @@ Wil je deze veranderingen opslaan? Stelt het groeperen in opmaak in (export modus): - + Grouping type Groeperen soort @@ -19833,7 +19866,7 @@ Wil je deze veranderingen opslaan? Kan papierformaat en expliciete paginagrootte/eenheden niet simultaan gebruiken. - + Page height, width, units must be used all 3 at once. Papier hoogte, breedte, eenheden moeten alle 3 tegelijkertijd gebruikt worden. @@ -19848,7 +19881,7 @@ Wil je deze veranderingen opslaan? - + Unsupported paper units. Niet ondersteunde papier eenheden. @@ -19858,8 +19891,8 @@ Wil je deze veranderingen opslaan? Niet ondersteunde opmaak eenheden. - - + + Export options can be used with single input file only. Exportopties kunnen worden gebruikt met slechts één invoerbestand. @@ -19868,17 +19901,17 @@ Wil je deze veranderingen opslaan? Laat het programma in een test-modus lopen. Het programma in deze modus laad een enkel patroon bestand en sluit geruisloos zonder dat het hoofdvenster wordt weergegeven. De sleutel heeft prioriteit voor sleutel '%1'. - + Test option can be used with single input file only. Test optie kan worden gebruikt met slechts één invoerbestand. - + The base filename of exported layout files. Use it to enable console export mode. De basis bestandsnaam van geëxporteerde opmaak bestanden. Gebruik het om het export modus console in te schakelen. - + The base filename of layout files De basis bestandsnaam van opmaak bestanden @@ -19887,7 +19920,7 @@ Wil je deze veranderingen opslaan? Het pad van de uitvoer naar de doelmap. - + The destination folder De doelmap @@ -19908,12 +19941,12 @@ Wil je deze veranderingen opslaan? De hoogte waarde - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Pagina breedte in huidige eenheden zoals 12.0 ( kan niet gebruikt worden met "%1", export modus). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Pagina breedte in huidige eenheden zoals 12.0 ( kan niet gebruikt worden met "%1", export modus). @@ -19944,22 +19977,22 @@ Wil je deze veranderingen opslaan? Negeer afdrukmarges (export modus). Stel alle marges op 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Linker pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Rechter pagina marge in huidige eenheden zoals 3.0 ( export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Top pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Onderste pagina marge in huidige eenheden zoals 3.0 (export modus). Wanneer dat niet ingesteld is wordt de waarde gebruikt van de standaard printer. Of 0 als er geen printers gevonden zijn. @@ -19968,32 +20001,32 @@ Wil je deze veranderingen opslaan? Verschuiving lengte moet gebruikt worden met verschuiving eenheden. - + Gap width must be used together with shift units. Tussenruimte moet worden gebruikt in combinatie met verschuiving eenheden. - + Left margin must be used together with page units. Linkermarge moet worden gebruikt in combinatie met pagina-eenheden. - + Right margin must be used together with page units. Rechtermarge moet worden gebruikt in combinatie met pagina-eenheden. - + Top margin must be used together with page units. Bovenmarge moet worden gebruikt in combinatie met pagina-eenheden. - + Bottom margin must be used together with page units. Ondermarge moet worden gebruikt in combinatie met pagina-eenheden. - + The path to output destination folder. By default the directory at which the application was started. Het pad naar de uitvoer van de doelmap. Standaard de map waarin de toepassing is gestart. @@ -20026,12 +20059,12 @@ Wil je deze veranderingen opslaan? Rotatie in graden (een van de vooraf gedefinieerde, export modus). Standaardwaarde is 180. 0 is niet roteren. Geldige waarden: %1. Elke waarde geeft weer hoeveel keer details zal worden gedraaid. Bijvoorbeeld 180 betekend twee keer (360/180 = 2) door 180 graden. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Verenig pagina's indien mogelijk (export modus). Maximale waarde beperkt door QImage welke slechts beelden met een maximum van 32768 x 32768 px ondersteunt. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Sla lengte van het blad op wanneer ingesteld (export modus). De optie vertelt het programma een zo groot mogelijk breedte van blad te gebruiken. Kwaliteit van een opmaak kan slechter worden wanneer deze optie is gebruikt. @@ -20040,17 +20073,17 @@ Wil je deze veranderingen opslaan? Verschuiven van opmaak lengte, gemeten in opmaak eenheden (export modus). De optie laat zien hoeveel punten langs de rand zal worden gebruikt bij het maken van een opmaak. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. De opmaak tussenruimte x2, gemeten in opmaak eenheden (export modus). Stel afstand in tussen details en een detail en een blad. - + Sets layout groupping cases (export mode): %1. Stelt opmaak in het groeperen van zaken(export modus): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Laat het programma in een test-modus lopen. Het programma in deze modus laad een enkel patroon bestand en sluit geruisloos zonder dat het hoofdvenster wordt weergegeven. De sleutel heeft prioriteit voor sleutel '%1'. @@ -20067,7 +20100,7 @@ Wil je deze veranderingen opslaan? Verschuiving/Offset lengte moet gebruikt worden in combinatie met verschuiving eenheden. - + Number corresponding to output format (default = 0, export mode): Nummer behorend bij de uitkomst indeling( standaardinstelling = 0, export modus): @@ -20077,316 +20110,321 @@ Wil je deze veranderingen opslaan? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Schakel hoog-dpi-schaling uit. Gebruik deze optie als je problemen hebt met schaalverandering (als default is uitgeschakeld). Als alternatief kun je %1 omgevingsvariabele gebruiken. - + Export dxf in binary form. Exporteer DXF in binary vorm. - + Show/hide grainline when export layout. - + Export text as paths. Exporteer tekst als paden. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Exporteer alleen details. Exporteer details zoals wanneer ze gepositioneerd in de details modus. Elke opmaak gerelateerde opties zullen worden genegeerd. - + Export only details that match a piece name regex. Exporteer enkel die details die kloppen met een patroondeelnaam regex. - + The name regex De naam regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. Exporteer naar CSV met kopschrift. Staat uit in de standaard instellingen. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Specificeer codec die gebruikt zal worden om gegevns op te slaan. Lijst van ondersteunde codecs aangeboden door Qt. Standaard waarde hangt af van het systeem. Binnen Windows zal de codec gebaseerd zijn op een systeem landinstelling. Op Unix systemen kan de codec terugvallen op het gebruik van de iconv bibliotheek als er geen ingebouwde codec voor de landinstelling gevonden kan worden. Geldige waardes voor deze installatie: - + Codec name Codec naam - + Specify csv separator character. Default value is '%1'. Valid characters: Geef csv scheidingsteken op. De standaard waarde is '%1'. Geldige tekens: - + Separator character Scheidingsteken - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Het oproepen van deze opdracht laat toe de definitieve maten te exporteren. Geef het pad naar het csv-bestand met de definitieve maten op. Het pad moet de map en de bestandsnaam bevatten. Het kan zowel absoluut of relatief zijn. In het geval van een relatief pad wordt de huidige map als basis voor de berekening van het bestemmingspad gebruikt. - + Path to csv file Pad naar csv bestand - + Number corresponding to layout page template (default = 0, export mode): Waarde die overeenkomt met het sjabloon van de opmaak pagina (standaard=0, export modus): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Waarde die overeenkomt met het gestapelde PDF sjabloon (standaard = 0, export modus met gestapeld PDF formaat): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Linker marge van gestapelde pagina in de huidige eenheid zoals 3.0 (export modus). Indien niet ingesteld wordt de standaard waarde van 1 cm gebruikt. - - + + The left margin Linker kantlijn - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Rechter marge van gestapelde pagina in de huidige eenheid zoals 3.0 (export modus). Indien niet ingesteld wordt de standaard waarde van 1 cm gebruikt. - - + + The right margin Rechter kantlijn - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Boven marge van gestapelde pagina in de huidige eenheid zoals 3.0 (export modus). Indien niet ingesteld wordt de standaard waarde van 1 cm gebruikt. - - + + The top margin Bovenste kantlijn - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Onder marge van gestapelde pagina in de huidige eenheid zoals 3.0 (export modus). Indien niet ingesteld wordt de standaard waarde van 1 cm gebruikt. - - + + The bottom margin Onderste kantlijn - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Zet oriëntatie van de gestapelde pagina naar landschap (export modus). Standaard waarde indien niet ingesteld is portret. - + Cannot use pageformat and page explicit size together. Kan papierformaat en expliciete paginagrootte niet simultaan gebruiken. - + Tiled left margin must be used together with page units. Gestapelde linker marge moet samen met de pagina eenheden gebruikt worden. - + Tiled right margin must be used together with page units. Gestapelde rechter marge moet samen met de pagina eenheden gebruikt worden. - + Tiled top margin must be used together with page units. Gestapelde boven marge moet samen met de pagina eenheden gebruikt worden. - + Tiled bottom margin must be used together with page units. Gestapelde onder marge moet samen met de pagina eenheden gebruikt worden. - + Page measure units (export mode). Valid values: %1. Pagina maten eenheden (export modus). Geldige waardes: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. Gebruik deze optie om de door de gebruiker gedefineerde materialen te overschrijven. De waarde moet in de vorm <number>@<user matrial name>. Het nummer moet tussen 1 en %1 vallen. Bijvoorbeeld, 1@Fabric2. De sleutel kan meerdere keren gebruikt worden. Het heeft geen effect in GUI modus. - + User material Gebruikers materiaal - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. Verander alle opsplits verwittigingen naar fouten. Werkt enkel in de console mode. Gebruik het om Valentina te dwingen onmiddellijk te stoppen als het patroon een opsplits verwittiging bevat. - + Invalid user material '%1'. Separator is missing. Ongeldig gebruikersmateriaal '%1'. Scheidingsteken ontbreekt. - + Invalid user material '%1'. Wrong material number. Ongeldig gebruikers materiaal '%1'. Verkeerd materiaal nummer. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. Verander oriëntatie van het pagina sjabloon naar landschap (export modus). Deze optie heeft enkel effect voor een voorgedefinieerd pagina sjabloon. - + The page height De papierhoogte - + Order detail to follow grainline direction (export mode). Beveel detail de recht-van-draad te volgen (export modus). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. <Time> in minuten toegekend aan het algoritme om de beste opmaak te vinden. Tijd moet tussen de 0 en 60 minuten liggen. Standaard waarde 1 minuut. - + Time Tijd - + Coefficient Coëfficiënt - + Time must be in range from 1 minute to 60 minutes. Tijd moet tussen 1 en 60 minuten vallen. - + Follow manual priority over priority by square (export mode). Volg de manuele voorrang in plaats van de vierkante voorrang (export modus). - + Nest quantity copies of each piece (export mode). Inpas hoeveelheid vn de kopiëen van elk stuk (export modus). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. Bepaal de opmaak efficiciëntie <coefficient>. De opmaak efficiëntie coëfficiënt is de verhouding van het gebied door de stukken ingenomen ten opzichte van de rechthoek die alle objecten bevat. Als het aantal inpassingen het verwachte niveau bereikt, wordt het proces gestopt. Als de waarde 0 is, wordt er niet gechecked. Coëfficiënt moet tussen en 0 en 100 liggen. Standaard waarde 0. - + Coefficient must be in range from 0 to 100. Coëfficiënt moet tussen 1 en 100 vallen. - + Auto crop unused width (export mode). Automatisch inkorten van ongebruikte breedte (export modus). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). Zet de horizontale schaal factor tussen 0.01 en 3.0 (standaard=1.0, export modus). - + Horizontal scale Horizontale schaal - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). Zet de vertikale schaal factor tussen 0.01 en 3.0 (standaard=1.0, export modus). - + Vertical scale Vertikale schaal - + Prefer one sheet layout solution (export mode). Verkies 1-blad opmaak oplossing (export modus). - + Invalid dimension A value. Ongeldige waarde voor dimensie A. - + Invalid dimension B value. Ongeldige waarde voor dimensie B. - + Invalid dimension C value. Ongeldige waarde voor dimensie C. - + Set base for dimension A in the multisize measurements units (export mode). Zet de basis voor dimensie A in de multimaten maten eenheden (export modus). - + The dimension A base Dimensie A basis - + Set base for dimension B in the multisize measurements units (export mode). Zet de basis voor dimensie B in de multimaten maten eenheden (export modus). - + The dimension B base Dimensie B basis - + Set base for dimension C in the multisize measurements units (export mode). Zet de basis voor dimensie C in de multimaten maten eenheden (export modus). - + The dimension C base Dimensie C basis @@ -20411,47 +20449,47 @@ Wil je deze veranderingen opslaan? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -20461,7 +20499,7 @@ Wil je deze veranderingen opslaan? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -20791,7 +20829,7 @@ Wil je deze veranderingen opslaan? VLayoutConverter - + Could not change version. Kon de versie niet veranderen. @@ -20804,73 +20842,73 @@ Wil je deze veranderingen opslaan? Kan bestand '%1' niet opslaan. Fout %2. - + Cannot set printer page size Kan paginagrootte op printer niet instellen - + Cannot set printer margins Kan de printer marges niet bepalen - + Can't open file '%1' Kan bestand '%1' niet openen - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 Bestand '%1' maken heeft gefaald! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files (platte)bestanden - + files bestanden - + Image files Afbeelding bestanden - + tiled gestapeld - + Numerical control Numerieke controle - + Raw Layout Data @@ -20883,12 +20921,12 @@ Wil je deze veranderingen opslaan? VLayoutPiece - + Piece %1 doesn't have shape. Deel %1 heeft geen vorm. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21192,8 +21230,8 @@ Wil je deze veranderingen opslaan? - - + + Pieces of @@ -21296,12 +21334,12 @@ Wil je deze veranderingen opslaan? VPGraphicsPiece - + Move to - + Remove from Sheet @@ -21317,37 +21355,37 @@ Wil je deze veranderingen opslaan? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -21399,7 +21437,7 @@ Wil je deze veranderingen opslaan? - + Properties @@ -21556,9 +21594,9 @@ Wil je deze veranderingen opslaan? - - - + + + Export Export @@ -21608,84 +21646,84 @@ Wil je deze veranderingen opslaan? - + zoom - - + + Scale Schaal - + &Open &Open - + &Save &Opslaan - + Save &As - + &Import Raw Layout Data - + E&xit E&xit - + &New &Nieuw - + About &Qt Over &Qt - + About &Puzzle - + Zoom in Inzoomen - + Zoom out Uitzoomen - + Zoom 1:1 - + Zoom fit best Zoom naar best passend - + Zoom sheet - - + + Preferences Voorkeuren @@ -21706,7 +21744,7 @@ Wil je deze veranderingen opslaan? - + Could not extract data from file '%1'. %2 @@ -21729,102 +21767,102 @@ Wil je deze veranderingen opslaan? Inches - + Scale: Schaal: - + untitled %1.vlt - + untitled.vlt - + read only alleen lezen - + Cannot read settings from a malformed .INI file. Kan instellingen niet inlezen wegens een niet-conform .INI-bestand. - + Cannot save settings. Access denied. Kan instellingen niet opslaan. Toegang geweigerd. - - - + + + Failed to open file, is it writable? Kan bestand niet openen. Is het beschrijfbaar? - + &New Window &Nieuw Venster - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Open bestand - + Could not save the file Het bestand is niet bewaard - + layout - + Save as Opslaan als - + Failed to lock. This file already opened in another window. Afsluiten is mislukt. Dit bestand is al geopend in een ander venster. - + Could not save file Kon bestand niet opslaan - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Afsluiten is mislukt. Dit bestand is al geopend in een ander venster. Verwacht een conflict als 2 kopieën van het programma gaan lopen. - + Raw Layout files - + About Qt Over Qt @@ -21861,13 +21899,13 @@ Wil je deze veranderingen opslaan? - + Horizontal: Horizontaal: - + Vertical: Vertikaal: @@ -21950,71 +21988,76 @@ Wil je deze veranderingen opslaan? - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print Afdrukken - - + + Print preview Druk voorbeeldweergave af - - + + Print tiled Print A0 in A4 formaat - - + + Print preview tiled Print voorbeeldweergave papierformaatindeling - + Editor Editor - + Create or edit a watermark Maak of wijzig een watermerk - + Edit current Bewerk huidig - + Load Laden - + Remove Verwijder @@ -22025,13 +22068,13 @@ Wil je deze veranderingen opslaan? - + &Undo &Ongedaan maken - + &Redo &Opnieuw @@ -22042,113 +22085,113 @@ Wil je deze veranderingen opslaan? Pixels - + Unsaved changes Niet opgeslagen veranderingen - + Save… Opslaan… - + Save Opslaan - + Don't Save Niet opslaan - - + + Can't create a path Kan geen pad maken - + Can't open file '%1' Kan bestand '%1' niet openen - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. Voor het afdrukken van multipagina's document, moeten alle bladen dezelfde maat hebben. - - - - - - - - + + + + + + + + Print error Afdruk fout - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Kan niet verder gaan omdat er geen beschikbare printers in het systeem zijn. - + Watermark files Watermerk bestanden - - - - + + + + Unable to get sheet page settings @@ -22158,27 +22201,27 @@ Wil je deze veranderingen opslaan? - + Z value - + Bottom - + Down - + Up - + Top @@ -22188,12 +22231,12 @@ Wil je deze veranderingen opslaan? - + sheet - + Piece %1 invalid. %2 @@ -22334,37 +22377,37 @@ Wil je deze veranderingen opslaan? Fout bij het maken of bijwerken van detail - + Error creating or updating single point Fout bij het maken of bijwerken van een enkele punt - - + + Error creating or updating point of end line Fout bij het maken of bijwerken van eindpunt van een lijn - - + + Error creating or updating point along line Fout bij het maken of bijwerken van een punt langs een lijn - - + + Error creating or updating point of shoulder Fout bij het maken of bijwerken van schouderpunt - - + + Error creating or updating point of normal Fout bij het maken of bijwerken van een normaal punt - - + + Error creating or updating point of bisector Fout bij het maken of bijwerken van punt van bisector @@ -22373,128 +22416,128 @@ Wil je deze veranderingen opslaan? Fout bij het maken of bijwerken van het punt van kruising van lijnen - - + + Error creating or updating point of contact Fout bij het maken of bijwerken van punt van contact - + Error creating or updating modeling point Fout bij het maken of bijwerken van vormgevend punt - + Error creating or updating height Fout bij het maken of bijwerken van hoogte - + Error creating or updating triangle Fout bij het maken of bijwerken van driehoek - + Error creating or updating point of intersection Fout bij het maken of bijwerken van het punt van een kruising - - + + Error creating or updating cut spline point Fout bij het maken of bijwerken van geknipte vrijevormkrommings punt - - + + Error creating or updating cut spline path point Fout bij het maken of bijwerken van geknipte vrijevormkrommings pad punt - - + + Error creating or updating cut arc point Fout bij het maken of bijwerken van geknipte boog punt - - + + Error creating or updating point of intersection line and axis Fout bij het maken of bijwerken van het kruispunt tussen lijn en aslijn - - + + Error creating or updating point of intersection curve and axis Fout bij het maken of bijwerken van het kruispunt tussen kromming en aslijn - + Error creating or updating line Fout bij het maken of bijwerken van lijnen - - + + Error creating or updating simple curve Fout bij het maken of bijwerken van een simpele kromming - - + + Error creating or updating curve path Fout bij het maken of bijwerken van een krommingspad - + Error creating or updating modeling simple curve Fout bij het maken of bijwerken van modelleren van simpele kromming - + Error creating or updating modeling curve path Fout bij het maken of bijwerken van vormgeven van krommingspad - - - - + + + + Error creating or updating simple arc Fout bij het maken of bijwerken van een simpele boog - + Error creating or updating modeling arc Fout bij het maken of bijwerken van vormgeven van een boog - + Error creating or updating union details Fout bij het maken of bijwerken van samengevoegde details - + Error creating or updating point of intersection arcs Fout bij het maken of bewerken van de kruising van bogen - + Error creating or updating point of intersection circles Fout bij het maken of bijwerken van een kruising van cirkels - + Error creating or updating point from circle and tangent Fout bij het maken of bijwerken van punt van cirkel en raaklijn - + Error creating or updating point from arc and tangent Fout bij het maken of bijwerken van het punt boog en raaklijn - + Error creating or updating true darts Fout bij het maken of bijwerken van coupenaden @@ -22511,17 +22554,17 @@ Wil je deze veranderingen opslaan? Onbekende punt type '%1'. - + Unknown spline type '%1'. Onbekend vrijvormkromming type '%1'. - + Unknown arc type '%1'. Onbekende boog type '%1'. - + Unknown tools type '%1'. Onbekende gereedschap type '%1'. @@ -22531,75 +22574,75 @@ Wil je deze veranderingen opslaan? Fout geen unieke ID. - + Error creating or updating point of intersection curves Fout bij het maken of bijwerken van kruispunt van krommingen - + Error creating or updating simple interactive spline Fout bij het maken of bijwerken van simpele interactieve vrijvormkromming - + Error creating or updating interactive spline path Fout bij het maken of bijwerken van interactieve vrijevormkrommings pad - + Error creating or updating cubic bezier curve Fout bij het maken of bijwerken van kubusachtige bezier kromming - + Error creating or updating cubic bezier path curve Fout bij het maken of bijwerken van kubusachtige bezier pad kromming - - + + Error creating or updating operation of rotation Fout bij het maken van of bijwerken van actie van draaiing - + Unknown operation type '%1'. Onbekende bewerkingstype '%1'. - + Error creating or updating operation of flipping by line Fout bij het maken of bijwerken van de bewerking van kantelen via een lijn - + Error creating or updating operation of flipping by axis Fout bij het maken of bijwerken van de bewerking van kantelen via een aslijn - - + + Error creating or updating operation of moving Fout bij het maken of bijwerken van de bewerking van een verplaatsing - + Error creating or updating point of line intersection Fout bij het maken of bijwerken van een kruispunt van een lijn - - + + Error creating or updating simple elliptical arc Fout bij het maken of bijwerken van een simpele ellipsvormige boog - + Unknown elliptical arc type '%1'. Onbekende ellipsvormige boog type '%1'. - + Error creating or updating modeling elliptical arc Fot bij het maken of bijwerken van vormgeven van een ellipsvormige boog @@ -22609,34 +22652,34 @@ Wil je deze veranderingen opslaan? Detail - + Unnamed path Onbenoemd pad - - + + Error creating or updating a piece path Fout bij het maken of bijwerken van een pad deel - + Error creating or updating pin point Fout bij het maken of bijwerken van een pin punt - + Piece path doesn't contain nodes Patroondeel pad bevat geen knooppunten - - + + Error creating or updating place label - + Can't find increment '%1' @@ -24415,108 +24458,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance Huidige naadtoeslag - + move pattern piece label verplaats patroondeel label - + resize pattern piece label wijzig grootte van patroondeel label - + rotate pattern piece label draai patroondeel label - + move pattern info label verplaats patroon informatie label - + resize pattern info label wijzig grootte patroon informatie label - + rotate pattern info label draai patroon informatie label - + move grainline verplaats recht-van-draad - + resize grainline wijzig grootte recht-van-draad - + rotate grainline draai de recht-van-draad - + Options Opties - + In layout In opmaak - + Hide main path Verberg hoofdpad - + Reset piece label template - + Delete Verwijder - + apply save detail options Voer Opslaan Detail Opties door - + multi deletion meerdere verwijderingen - + Forbid flipping Kantelen niet toegestaan - + Force flipping Forceer kantelen - + This id (%1) is not unique. De id (%1) is niet uniek. - + Tool was used after deleting. Gereedschap werd gebruikt na verwijdering. diff --git a/share/translations/valentina_pl_PL.ts b/share/translations/valentina_pl_PL.ts index b5c7bb4a8..a6c920f9e 100644 --- a/share/translations/valentina_pl_PL.ts +++ b/share/translations/valentina_pl_PL.ts @@ -1296,22 +1296,22 @@ Move on top - Przesuń na wierzch + Przesuń na wierzch Move up - Przesuń wyżej + Przesuń wyżej Move down - Przesuń niżej + Przesuń niżej Move on bottom - Przesuń na spód + Przesuń na spód @@ -4547,40 +4547,40 @@ stopnień - + Three groups: big, middle, small - + Two groups: big, small - + Descending area - - + + Millimiters Milimetry - - + + Centimeters Centymetry - - + + Inches Cale - + Pixels Piksele @@ -4590,22 +4590,22 @@ - + Auto crop unused length - + Unite pages (if possible) - + Gap width: - + Save length of the sheet @@ -4655,12 +4655,12 @@ - + Wrong fields. - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4668,32 +4668,32 @@ - + Layout options - + Rule for choosing the next workpiece - + Divide into strips - + Multiplier - + Set multiplier for length of the biggest workpiece in layout. - + Enabling for sheets that have big height will speed up creating. @@ -4703,7 +4703,7 @@ Drukarka: - + None Printer @@ -4734,70 +4734,85 @@ Ignoruj marginesy - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -7643,7 +7658,7 @@ Apply settings anyway? - + File name: @@ -7668,8 +7683,8 @@ Apply settings anyway? - - + + File base name @@ -7695,37 +7710,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins Marginesy - + Right: Prawy: - + Left: Lewy: - + Top: - + Bottom: - + Paper format Format papieru @@ -7735,20 +7755,20 @@ Apply settings anyway? Przeglądaj… - - - - + + + + cm cm - + Templates: Szablony: - + Orientation: @@ -7758,17 +7778,17 @@ Apply settings anyway? Opcje - + Scale - + Horizontal: - + Vertical: @@ -9191,22 +9211,22 @@ Apply settings anyway? Move on top - Przesuń na wierzch + Przesuń na wierzch Move up - Przesuń wyżej + Przesuń wyżej Move down - Przesuń niżej + Przesuń niżej Move on bottom - Przesuń na spód + Przesuń na spód @@ -9945,27 +9965,27 @@ Apply settings anyway? Punkt - + Point along perpendicular Dodaj punkt prostopadły - + Perpendicular point along line - + Point along bisector Dodaj punkt na dwusiecznej - + Point at distance and angle Dodaj punkt wg zadanej odległości i kąta - + Point at distance along line Dodaj punkt na linii @@ -9978,12 +9998,12 @@ Apply settings anyway? Linia - + Line between points Linia pomiędzy punktami - + Point at line intersection @@ -10000,7 +10020,7 @@ Apply settings anyway? Narzędzie do tworzenia łuków. - + Arc Łuk @@ -10024,210 +10044,215 @@ Apply settings anyway? &Wykrój - + Measurements Wymiary - + Window Okno - + Toolbar files - + ToolBar modes - + Toolbar pattern - + Toolbar options - + Toolbar tools - + Tool options Opcje narzędzia - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Nowy - + &New &Nowy - + Create a new pattern - + Open Otwórz - + &Open &Otwórz - + Open file with pattern Otwórz plik z wykrojem - - + + Save Zapisz - + &Save &Save - + Save pattern Zapisz wykrój - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Zapisz &jako… - + Save not yet saved pattern - + Draw Rysuj - + Details Detale - + Pointer tools - + New pattern piece Nowa forma - + Add new pattern piece Dodaj nowy wykrój / formę - + Change the label of pattern piece Zmień etykietę formy @@ -10240,57 +10265,57 @@ Apply settings anyway? Tabele zmiennych - - + + History Historia - + About &Qt O &Qt - + &About Valentina &O programie Valentina - + E&xit Zakończ - + Exit the application Zamknij aplikację - + Preferences Ustawienia - + Pattern properties Właściwości wykroju - - + + Zoom in Przybliż - + zoom in przybliż - - - + + + Zoom out Oddal @@ -10307,12 +10332,12 @@ Apply settings anyway? Domyślny widok - + Zoom fit best Dopasuj przybliżenie - + Report bug @@ -10329,8 +10354,8 @@ Apply settings anyway? Pokaż pomoc online - - + + Pattern piece %1 Forma %1 @@ -10419,7 +10444,7 @@ Apply settings anyway? - + About Qt O Qt @@ -10451,7 +10476,7 @@ Apply settings anyway? - + Open file Otwórz plik @@ -10468,7 +10493,7 @@ Apply settings anyway? - + Error empty parameter. @@ -10484,17 +10509,17 @@ Apply settings anyway? - + Bad id. - + File saved Plik zapisany - + untitled.val bez_nazwy.val @@ -10505,23 +10530,23 @@ Do you want to save your changes? - + &Undo &Cofnij - + &Redo &Ponów - + Pattern piece: Forma: - + Enter a new label for the pattern piece. Wpisz nazwę dla wybranej formy. @@ -10532,18 +10557,18 @@ Do you want to save your changes? - - + + File error. Błędny plik. - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? - + Reopen files. @@ -10556,52 +10581,52 @@ Do you want to save your changes? Indywidualne wymiary (*.vit) - + Special point on shoulder - + Triangle tool - + Point from X and Y of two other points Dodaj punkt na przecięciu dwóch innych punktów - + Point intersect line and axis - + Simple curve - + Curved path - + Segmenting a simple curve Podział krzywej - + Segment a curved path Zaznaczona scieżka krzywej - + Point intersect curve and axis Punkt przecięcia krzywej i osi - + Segment an arc Podziel łuk @@ -10610,17 +10635,17 @@ Do you want to save your changes? Stwórz nowy szablon - + Union tool - + Last Tool Ostatnie narzędzie - + Activate last used tool again Użyj ostatnio używanego narzędzia ponownie @@ -10630,63 +10655,63 @@ Do you want to save your changes? - + Mode Tryb - + Pointer Wskaźnik - + Config pattern piece Konfiguracja formy - + Layout Układ - + Show Curve Details - + Show/hide control points and curve direction - + Point of intersection arcs - + Point of intersection circles - + Point from circle and tangent - + Point from arc and tangent - + Arc with given length - + Layout pages @@ -10695,33 +10720,33 @@ Do you want to save your changes? Zapisz jako PDF - + Print - + Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) - + Print preview - + Print preview original layout - - + + Export original layout @@ -10751,12 +10776,12 @@ Do you want to save your changes? - + Layout mode - + Unsaved changes @@ -10787,12 +10812,12 @@ Do you want to save your changes? Wymiary standardowe (*.vst);;Wymiary indywidualne (*.vit) - + You can't export empty scene. - + Create new Layout @@ -10811,7 +10836,7 @@ Do you want to save your changes? - + Measurement file has unknown format. @@ -10830,13 +10855,13 @@ Do you want to save your changes? - + Couldn't update measurements. Nie można uaktualnić wymiarów. - - + + The measurements file '%1' could not be found. Nie odnaleziono pliku '%1' z wymiarami. @@ -10845,57 +10870,57 @@ Do you want to save your changes? Nie odnaleziono pliku <br/><br/> <b>%1</b> <br/><br/> z wymiarami. Czy chcesz zmienić położenie pliku - + Loading measurements file - - - + + + The method %1 does nothing in GUI mode - - - - + + + + Export error. - + Please, provide one input file. - + Print an original layout - + Preview tiled PDF - + Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -10910,7 +10935,7 @@ Do you want to save your changes? - + True darts @@ -10934,12 +10959,12 @@ Do you want to save your changes? Zapisz... - + Don't Save Nie zapisuj - + Point intersection curves @@ -10949,7 +10974,7 @@ Do you want to save your changes? - + Curve tool which uses point as control handle @@ -10968,24 +10993,24 @@ Do you want to save your changes? Operacje - + Rotate objects - - - + + + Close pattern - + Midpoint between two points - + Group Grupa @@ -11002,8 +11027,8 @@ Do you want to save your changes? - - + + Original zoom Domyślny widok @@ -11033,22 +11058,22 @@ Do you want to save your changes? Rozmiar: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line - + Flipping objects by axis - + Move objects @@ -11063,7 +11088,7 @@ Do you want to save your changes? - + Elliptical Arc @@ -11083,89 +11108,89 @@ Do you want to save your changes? Nie można zapisać pliku - + read only tylko do odczytu - + Variables Table - + Contains information about increments and internal variables - + Load Individual - + Load Individual measurements file - - + + Load Multisize - + Load multisize measurements file - + Open Tape Otwórz Tape - + Edit Current - + Edit linked to the pattern measurements - + Sync - + Synchronize linked to the pattern measurements after change - + Unload Current - + Unload measurements if they were not used in a pattern file - - + + Individual measurements Indywidualne wymiary - - + + Multisize measurements @@ -11176,7 +11201,7 @@ Do you want to save your changes? Pliki wykroju - + Pin tool @@ -11186,17 +11211,17 @@ Do you want to save your changes? - + Insert node tool - + Open Tape app for creating or editing measurements file - + Export increments to CSV @@ -11236,143 +11261,143 @@ Do you want to save your changes? - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… Zapisz jako… - + Report Bug… - + Export As… - + Save… - + Final measurements Wymiary końcowe - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool - + Duplicate detail tool @@ -11382,7 +11407,7 @@ Do you want to save your changes? - + The measurements file '%1' could not be found or provides not enough information. @@ -11402,17 +11427,17 @@ Do you want to save your changes? - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -11436,27 +11461,27 @@ Do you want to save your changes? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -11467,119 +11492,119 @@ Do you want to save your changes? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark Znak wodny - + Load - + Remove Usuń - + Edit current - + Editor - + Create or edit a watermark @@ -11589,37 +11614,37 @@ Do you want to save your changes? Plik znaku wodnego - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update - + Update manual layout @@ -11645,87 +11670,87 @@ Do you want to save your changes? - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -11810,38 +11835,38 @@ Do you want to save your changes? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled bez nazwy - + All files Wszystkie pliki - + Save Image - + Visibility group - + Show accuracy radius @@ -11857,100 +11882,100 @@ Do you want to save your changes? plik PDF (*.pdf) - + unnamed - + Couldn't prepare data for creation layout - - + + Can't create a path - + Preparing details for layout - + Pattern Wykrój - + Name Nazwa - + Value Wartość - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description Opis - + Measurement file has unknown format. - + File error. Błędny plik. - + Measurement file doesn't include all required measurements. Plik z wymiarami nie zawiera wszystkich wymaganych wymiarów. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -11979,7 +12004,7 @@ Do you want to save your changes? MoveLabel - + move point label przesuń etykietę punktu @@ -13409,14 +13434,14 @@ This option will take an affect after restart. - + Can't convert toUInt parameter - + Can't convert toBool parameter @@ -13427,7 +13452,7 @@ This option will take an affect after restart. - + Can't convert toDouble parameter @@ -13456,22 +13481,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -13481,7 +13506,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -13525,13 +13550,13 @@ This option will take an affect after restart. Błąd składni: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -13541,7 +13566,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -13573,8 +13598,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -13596,7 +13621,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -13608,47 +13633,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -13676,39 +13701,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -13736,23 +13761,18 @@ This option will take an affect after restart. - + Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -13800,25 +13820,25 @@ This option will take an affect after restart. - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -13834,13 +13854,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -14374,7 +14394,7 @@ This option will take an affect after restart. - + 0 results @@ -14425,21 +14445,21 @@ This option will take an affect after restart. - + Name measurement column Nazwa - + Full name measurement column Pełna nazwa - + Group measurement column Grupa @@ -14661,7 +14681,7 @@ This option will take an affect after restart. - + Import from CSV @@ -14671,244 +14691,244 @@ This option will take an affect after restart. Eksportuj do CSV - + Show in Finder - + File '%1' doesn't exist! Plik '%1' nie istnieje! - + File error. Błędny plik. - + untitled %1 bez nazwy %1 - - + + untitled bez nazwy - + read only tylko do odczytu - - + + Known measurements - + All files Wszystkie pliki - + Could not save the file Nie można zapisać pliku - + known measurements - + Save as Zapisz jako - + Failed to lock. This file already opened in another window. - + Could not save file Nie można zapisać pliku - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt Informacje o Qt - + Empty Pusty - + File was not saved yet. Plik jeszcze nie zapisany. - + Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save Zapisz - + Don't Save Nie zapisuj - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list Pusty - + Unknown measurement - + &New Window &Nowe okno - - + + Unnamed image %1 - + Open file Otwórz plik - + Length units - + Degrees Stopnie - + None - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Formuła - + Description measurement column Opis - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -15277,7 +15297,7 @@ Czy chcesz zapisać zmiany? - + Pattern unit: Jednostka projektu: @@ -15354,19 +15374,19 @@ Czy chcesz zapisać zmiany? Kasuj wymiar - + unknown gender nieznana - + male gender mężczyzna - + female gender kobieta @@ -15634,38 +15654,38 @@ Czy chcesz zapisać zmiany? - - + + Name measurement column Nazwa - - + + Full name measurement column Pełna nazwa - - + + Calculated value measurement column Wartość obliczona - + Formula measurement column Formuła - + Base value measurement column Wartość podstawowa @@ -15869,40 +15889,40 @@ Czy chcesz zapisać zmiany? - + Invalid link - + Known measurements %1 - - + + Description measurement column Opis - - - + + + Shift measurement column - + Empty list Pusty - - - + + + %1 shift @@ -15919,22 +15939,22 @@ Czy chcesz zapisać zmiany? - + Millimeters - + Inches Cale - + Centimeters Centymetry - + Degrees Stopnie @@ -15960,7 +15980,7 @@ Czy chcesz zapisać zmiany? - + 0 results @@ -17120,12 +17140,12 @@ Czy chcesz zapisać zmiany? - + None - + Known measurements %1 @@ -17414,27 +17434,22 @@ Czy chcesz zapisać zmiany? - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -18356,26 +18371,26 @@ Czy chcesz zapisać zmiany? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -18460,21 +18475,39 @@ Czy chcesz zapisać zmiany? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -18486,33 +18519,33 @@ Czy chcesz zapisać zmiany? VCommandLine - + Path to custom measure file (export mode). - + The measure file - + Format number - - + + Template number - + The page width - + The measure unit @@ -18521,27 +18554,27 @@ Czy chcesz zapisać zmiany? Kąt - + Auto crop unused length (export mode). - + The unit - + The gap width - + Grouping type - + Page height, width, units must be used all 3 at once. @@ -18552,7 +18585,7 @@ Czy chcesz zapisać zmiany? - + Unsupported paper units. @@ -18562,38 +18595,38 @@ Czy chcesz zapisać zmiany? - - + + Export options can be used with single input file only. - + Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files - + The destination folder - + Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -18608,397 +18641,402 @@ Czy chcesz zapisać zmiany? Plik wykroju. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Gap width must be used together with shift units. - + Left margin must be used together with page units. - + Right margin must be used together with page units. - + Top margin must be used together with page units. - + Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Number corresponding to output format (default = 0, export mode): - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. Eksportuj tekst jako ścieżkę. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time Czas - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -19023,47 +19061,47 @@ Czy chcesz zapisać zmiany? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -19073,7 +19111,7 @@ Czy chcesz zapisać zmiany? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -19348,7 +19386,7 @@ Czy chcesz zapisać zmiany? VLayoutConverter - + Could not change version. @@ -19361,73 +19399,73 @@ Czy chcesz zapisać zmiany? - + Cannot set printer page size - + Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files pliki - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -19440,12 +19478,12 @@ Czy chcesz zapisać zmiany? VLayoutPiece - + Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -19749,8 +19787,8 @@ Czy chcesz zapisać zmiany? - - + + Pieces of @@ -19853,12 +19891,12 @@ Czy chcesz zapisać zmiany? VPGraphicsPiece - + Move to - + Remove from Sheet @@ -19874,37 +19912,37 @@ Czy chcesz zapisać zmiany? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -19956,7 +19994,7 @@ Czy chcesz zapisać zmiany? - + Properties @@ -20113,9 +20151,9 @@ Czy chcesz zapisać zmiany? - - - + + + Export Eksport @@ -20165,84 +20203,84 @@ Czy chcesz zapisać zmiany? - + zoom - - + + Scale - + &Open &Otwórz - + &Save &Save - + Save &As - + &Import Raw Layout Data - + E&xit Zakończ - + &New &Nowy - + About &Qt Informacje o &Qt - + About &Puzzle - + Zoom in Przybliż - + Zoom out Oddal - + Zoom 1:1 - + Zoom fit best Dopasuj przybliżenie - + Zoom sheet - - + + Preferences Ustawienia @@ -20263,7 +20301,7 @@ Czy chcesz zapisać zmiany? - + Could not extract data from file '%1'. %2 @@ -20286,102 +20324,102 @@ Czy chcesz zapisać zmiany? Cale - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only tylko do odczytu - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window &Nowe okno - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Otwórz plik - + Could not save the file Nie można zapisać pliku - + layout - + Save as Zapisz jako - + Failed to lock. This file already opened in another window. - + Could not save file Nie można zapisać pliku - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt Informacje o Qt @@ -20418,13 +20456,13 @@ Czy chcesz zapisać zmiany? - + Horizontal: - + Vertical: @@ -20507,71 +20545,76 @@ Czy chcesz zapisać zmiany? - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print - - + + Print preview - - + + Print tiled - - + + Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove Usuń @@ -20582,13 +20625,13 @@ Czy chcesz zapisać zmiany? - + &Undo &Cofnij - + &Redo &Ponów @@ -20599,113 +20642,113 @@ Czy chcesz zapisać zmiany? Piksele - + Unsaved changes - + Save… - + Save Zapisz - + Don't Save Nie zapisuj - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. - + Watermark files Plik znaku wodnego - - - - + + + + Unable to get sheet page settings @@ -20715,27 +20758,27 @@ Czy chcesz zapisać zmiany? - + Z value - + Bottom - + Down - + Up - + Top @@ -20745,12 +20788,12 @@ Czy chcesz zapisać zmiany? - + sheet - + Piece %1 invalid. %2 @@ -20887,163 +20930,163 @@ Czy chcesz zapisać zmiany? - + Error creating or updating single point - - + + Error creating or updating point of end line - - + + Error creating or updating point along line - - + + Error creating or updating point of shoulder - - + + Error creating or updating point of normal - - + + Error creating or updating point of bisector - - + + Error creating or updating point of contact - + Error creating or updating modeling point - + Error creating or updating height - + Error creating or updating triangle - + Error creating or updating point of intersection - - + + Error creating or updating cut spline point - - + + Error creating or updating cut spline path point - - + + Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis - + Error creating or updating line - - + + Error creating or updating simple curve - - + + Error creating or updating curve path - + Error creating or updating modeling simple curve - + Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc - + Error creating or updating modeling arc - + Error creating or updating union details - + Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent - + Error creating or updating true darts @@ -21060,17 +21103,17 @@ Czy chcesz zapisać zmiany? - + Unknown spline type '%1'. - + Unknown arc type '%1'. - + Unknown tools type '%1'. @@ -21080,75 +21123,75 @@ Czy chcesz zapisać zmiany? - + Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline - + Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation - + Unknown operation type '%1'. - + Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving - + Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc @@ -21158,34 +21201,34 @@ Czy chcesz zapisać zmiany? Detal - + Unnamed path Nienazwana ścieżka - - + + Error creating or updating a piece path - + Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -22832,108 +22875,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance - + move pattern piece label przesuń etykietę formy - + resize pattern piece label zmień rozmiar etykiety formy - + rotate pattern piece label obróć etykietę formy - + move pattern info label - + resize pattern info label - + rotate pattern info label - + move grainline - + resize grainline - + rotate grainline - + Options Opcje - + In layout - + Hide main path - + Reset piece label template - + Delete Usuń - + apply save detail options - + multi deletion - + Forbid flipping - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_pt_BR.ts b/share/translations/valentina_pt_BR.ts index 097f9f224..34ca53062 100644 --- a/share/translations/valentina_pt_BR.ts +++ b/share/translations/valentina_pt_BR.ts @@ -1296,22 +1296,22 @@ Move on top - Mover para o topo + Mover para o topo Move up - Subir + Subir Move down - Descer + Descer Move on bottom - Mover para a base + Mover para a base @@ -4767,40 +4767,40 @@ Princípio de escolha da próxima peça - + Three groups: big, middle, small Três grupos: grande médio, pequeno - + Two groups: big, small Dois grupos: grande, pequeno - + Descending area Área decrescente - - + + Millimiters Milimetros - - + + Centimeters Centimetros - - + + Inches Polegadas - + Pixels Píxels @@ -4810,22 +4810,22 @@ Criar um layout - + Auto crop unused length Cortar automaticamente comprimento não usado - + Unite pages (if possible) Unir páginas (se for possível) - + Gap width: Largura da abertura: - + Save length of the sheet Salvar comprimento da folha @@ -4907,7 +4907,7 @@ Personalizado - + Wrong fields. Campos incorretos. @@ -4920,7 +4920,7 @@ Apply settings anyway? Aplicar configurações assim mesmo? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4931,7 +4931,7 @@ Aplicar configurações assim mesmo? Área decrescente = 2 - + Layout options Opções de layout @@ -4940,7 +4940,7 @@ Aplicar configurações assim mesmo? Comprimento de Deslocamento - + Rule for choosing the next workpiece Regra para escolha da próxima peça @@ -4949,17 +4949,17 @@ Aplicar configurações assim mesmo? A ativação de folhas com grande altura acelerará a criação. - + Divide into strips Dividir em faixas - + Multiplier Multiplicador - + Set multiplier for length of the biggest workpiece in layout. Define o multiplicador para o comprimento da maior peça de trabalho no layout. @@ -4968,7 +4968,7 @@ Aplicar configurações assim mesmo? x - + Enabling for sheets that have big height will speed up creating. A ativação de folhas com grande altura acelerará a criação. @@ -4978,7 +4978,7 @@ Aplicar configurações assim mesmo? Impressora: - + None Printer Nenhum @@ -5009,7 +5009,7 @@ Aplicar configurações assim mesmo? Ignorar margens - + Margins go beyond printing. Apply settings anyway? @@ -5018,63 +5018,78 @@ Apply settings anyway? Aplicar configurações de qualquer forma? - + Follow grainline Seguir sentido do fio - + Time: Tempo: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. Tempo para o algoritmo encontrar o melhor layout. - + Efficiency: Eficiência: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority Prioridade manual - + Nest quantity of copies according to piece settings. Agrupar quantidade de cópias de acordo com as definições da peça. - + Nest quantity Agrupar quantidade - + Auto crop unused width Cortar automaticamente largura não utilizada - + Prefer one sheet solution Preferir solução de uma folha - + min minutes min - + Enable this option to prefer getting one sheet solutions. Habilite essa opção para preferir a solução de uma página. @@ -8146,7 +8161,7 @@ Aplicar configurações de qualquer forma? Salvar layout - + File name: Nome do arquivo: @@ -8179,8 +8194,8 @@ Aplicar configurações de qualquer forma? Selecionar caminho para diretório de destino - - + + File base name Nome do arquivo base @@ -8214,37 +8229,42 @@ Aplicar configurações de qualquer forma? + Boundary together with notches + + + + Not available options - + Margins Margens - + Right: Direita: - + Left: Esquerda: - + Top: Topo: - + Bottom: Base: - + Paper format Formato do papel @@ -8254,20 +8274,20 @@ Aplicar configurações de qualquer forma? Navegar… - - - - + + + + cm cm - + Templates: Modelos: - + Orientation: Orientação: @@ -8277,17 +8297,17 @@ Aplicar configurações de qualquer forma? Opções - + Scale Escala - + Horizontal: Horizontal: - + Vertical: Vertical: @@ -9802,22 +9822,22 @@ Aplicar configurações de qualquer forma? Move on top - Mover para o topo + Mover para o topo Move up - Subir + Subir Move down - Descer + Descer Move on bottom - Mover para a base + Mover para a base @@ -10643,27 +10663,27 @@ Aplicar configurações de qualquer forma? Ponto - + Point along perpendicular Ponto ao longo da perpendicular - + Perpendicular point along line Ponto perpendicular ao longo da linha - + Point along bisector Ponto ao longo da bissetriz - + Point at distance and angle Ponto a distância e ângulo - + Point at distance along line Ponto a uma distância sobre a linha @@ -10676,12 +10696,12 @@ Aplicar configurações de qualquer forma? Linha - + Line between points Linha entre pontos - + Point at line intersection Ponto na linha de interseção @@ -10698,7 +10718,7 @@ Aplicar configurações de qualquer forma? Ferramentas para criar arcos. - + Arc Arco @@ -10726,210 +10746,215 @@ Aplicar configurações de qualquer forma? &Peça de modelagem - + Measurements Medidas - + Window Janela - + Toolbar files Barra de ferramentas de arquivos - + ToolBar modes Barra de ferramentas modos - + Toolbar pattern Barra de ferramentas molde - + Toolbar options Barra de ferramentas opções - + Toolbar tools Barra de ferramentas de ferramentas - + Tool options Opções de ferramentas - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Novo - + &New &Novo - + Create a new pattern Criar um novo molde - + Open Abrir - + &Open &Abrir - + Open file with pattern Abrir arquivo com molde - - + + Save Salvar - + &Save &Salvar - + Save pattern Salvar molde - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Salvar &Como... - + Save not yet saved pattern Salvar molde ainda não salvo - + Draw Desenhar - + Details Detalhes - + Pointer tools Ferramentas de ponteiros - + New pattern piece Nova peça de modelagem - + Add new pattern piece Adicionar nova peça de modelagem - + Change the label of pattern piece Alterar o rótulo da peça de modelagem @@ -10942,57 +10967,57 @@ Aplicar configurações de qualquer forma? Tabelas de variáveis - - + + History Histórico - + About &Qt Sobre &Qt - + &About Valentina &Sobre Valentina - + E&xit S&air - + Exit the application Sair do aplicativo - + Preferences Preferências - + Pattern properties Propriedades do molde - - + + Zoom in Ampliar - + zoom in ampliar - - - + + + Zoom out Reduzir @@ -11009,7 +11034,7 @@ Aplicar configurações de qualquer forma? Zoom Anterior - + Zoom fit best Ajustar à janela @@ -11026,7 +11051,7 @@ Aplicar configurações de qualquer forma? Reportar Erro... - + Report bug Reportar erro @@ -11043,8 +11068,8 @@ Aplicar configurações de qualquer forma? Mostrar ajuda online - - + + Pattern piece %1 Peça de modelagem %1 @@ -11137,7 +11162,7 @@ Aplicar configurações de qualquer forma? Selecionar curva - + About Qt Sobre Qt @@ -11177,7 +11202,7 @@ Aplicar configurações de qualquer forma? - + Open file Abrir arquivo @@ -11194,7 +11219,7 @@ Aplicar configurações de qualquer forma? - + Error empty parameter. Erro de parâmetro vazio. @@ -11210,17 +11235,17 @@ Aplicar configurações de qualquer forma? Erro ao analisar o arquivo (std::bad_alloc). - + Bad id. Identificação deficiente. - + File saved Arquivo Salvo - + untitled.val sem título.val @@ -11232,23 +11257,23 @@ Você quer salvar suas mudanças? - + &Undo &Desfazer - + &Redo &Refazer - + Pattern piece: Peça de modelagem: - + Enter a new label for the pattern piece. Insira um novo rótulo para peça de modelagem. @@ -11267,8 +11292,8 @@ Você quer salvar suas mudanças? - - + + File error. Erro de arquivo. @@ -11277,12 +11302,12 @@ Você quer salvar suas mudanças? Arquivo carregado - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Valentina não fechou corretamente. Deseja abrir novamente os arquivos (%1) que você abriu? - + Reopen files. Reabrir arquivos. @@ -11295,12 +11320,12 @@ Você quer salvar suas mudanças? Medidas individuais (*.vit) - + Special point on shoulder Ponto especial no ombro - + Triangle tool Ferramenta de triângulo @@ -11309,42 +11334,42 @@ Você quer salvar suas mudanças? Ponto de interseção entre arco e linha - + Point from X and Y of two other points Ponto a partir de X e Y de dois outros pontos - + Point intersect line and axis Ponto de interseção entre linha e eixo - + Simple curve Curva simples - + Curved path Caminho curvado - + Segmenting a simple curve Segmentação de uma curva simples - + Segment a curved path Segmentar caminho curvo - + Point intersect curve and axis Ponto de intersecção entre curva e eixo - + Segment an arc Segmentar um arco @@ -11357,7 +11382,7 @@ Você quer salvar suas mudanças? Ferramenta de margem de costura - + Union tool Ferramenta de união @@ -11366,12 +11391,12 @@ Você quer salvar suas mudanças? Barra de ferramentas - + Last Tool Última ferramenta - + Activate last used tool again Reative a última ferramenta usada @@ -11381,33 +11406,33 @@ Você quer salvar suas mudanças? Selecione o ponto para o valor X (vertical) - + Mode Modo - + Pointer Ponteiro - + Config pattern piece Configurar peça de modelagem - + Layout Layout - + Show Curve Details Mostrar detalhes da curva - + Show/hide control points and curve direction Mostrar/ocultar pontos de controle e direção da curva @@ -11416,27 +11441,27 @@ Você quer salvar suas mudanças? Ferramentas - + Point of intersection arcs Ponto de interseção de arcos - + Point of intersection circles Ponto de interseção de cículos - + Point from circle and tangent Ponto em círculo e tangente - + Point from arc and tangent Ponto em arco e tangente - + Arc with given length Arco com comprimento determinado @@ -11445,7 +11470,7 @@ Você quer salvar suas mudanças? Configurações - + Layout pages Páginas de layout @@ -11466,27 +11491,27 @@ Você quer salvar suas mudanças? Dividir e salvar um layout em páginas menores - + Print Imprimir - + Print tiled PDF Imprimir mosáico PDF - + Split and print a layout into smaller pages (for regular printers) Dividir e salvar um layout em páginas menores (para impressoras usuais) - + Print preview Imprimir visualização - + Print preview original layout Imprimir visualização do layout original @@ -11495,8 +11520,8 @@ Você quer salvar suas mudanças? Exportar como... - - + + Export original layout Exportar layout original @@ -11538,7 +11563,7 @@ Você quer salvar suas mudanças? - + Layout mode Modo layout @@ -11547,7 +11572,7 @@ Você quer salvar suas mudanças? Você não pode usar o modo Layout agora. Por favor, crie pelo menos uma peça de trabalho. - + Unsaved changes Alterações não salvas @@ -11586,12 +11611,12 @@ Você quer salvar suas mudanças? Medidas padrão (*.vst);;Medidas individuais (*.vit) - + You can't export empty scene. Você não pode exportar cena vazia. - + Create new Layout Criar novo layout @@ -11623,7 +11648,7 @@ Você quer salvar suas mudanças? O arquivo de medidas contém medida(s) conhecidas inválidas. - + Measurement file has unknown format. Arquivo de medidas tem formato desconhecido. @@ -11650,13 +11675,13 @@ Você quer salvar suas mudanças? Não foi possível sincronizar as medidas. - + Couldn't update measurements. Não foi possível atualizar as medidas. - - + + The measurements file '%1' could not be found. O arquivo de medidas '%1' não pôde ser encontrado. @@ -11665,7 +11690,7 @@ Você quer salvar suas mudanças? O arquivo de medidas <br/><br/> <b>%1</b> <br/><br/> não pôde ser encontrado. Deseja atualizar o local do arquivo - + Loading measurements file Carregando arquivo de medidas @@ -11682,9 +11707,9 @@ Você quer salvar suas mudanças? Não foi possível definir o tamanho. O arquivo não foi aberto. - - - + + + The method %1 does nothing in GUI mode O método%1 não faz nada no modo GUI @@ -11701,45 +11726,45 @@ Você quer salvar suas mudanças? Não foi possível definir a altura. O arquivo não foi aberto. - - - - + + + + Export error. Erro de exportação. - + Please, provide one input file. Por favor, forneça um arquivo de entrada. - + Print an original layout Imprimir layout original - + Preview tiled PDF Visualizar mosáico PDF - + Print preview tiled layout Imprimir visualização do layout em mosáico - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Modo para trabalhar com peças de modelagem. Essas peças de modelagem são base para a próxima etapa &quot;Modo de detelhes&quot;. Antes que você possa habilitar o &quot;modo Detalhes&quot; precisa criar pelo menos um detalhe.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Modo para trabalhar com detalhes. Antes que você possa habilitar o &quot;modo Detalhes&quot; precisa criar pelo menos um detalhe no estágio &quot;Modo de desenho&quot;. Os detalhes criados nesta etapa serão usados para criar um layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Modo para criar um layout de detalhes. Este modo disponível se foi criado pelo menos um detalhe no estágio &quot;Detalhes do modo&quot;. O layout pode ser exportado para o seu formato de arquivo preferido e salvo em seu disco rígido.</p></body></html> @@ -11762,7 +11787,7 @@ Você quer salvar suas mudanças? Não foi possível descarregar as medidas. Alguns deles são usados no molde. - + True darts Pence verdadeira @@ -11786,7 +11811,7 @@ Você quer salvar suas mudanças? Salvar... - + Don't Save Não salvar @@ -11819,7 +11844,7 @@ Você quer salvar suas mudanças? Reportar Erro... - + Point intersection curves Ponto de interseção de curvas @@ -11837,7 +11862,7 @@ Você quer salvar suas mudanças? As medidas foram alteradas. Deseja sincronizar as medidas agora? - + Curve tool which uses point as control handle Ferramenta de curva que usa o ponto como controle @@ -11872,14 +11897,14 @@ Você quer salvar suas mudanças? Selecione um ou mais objetos, <b>Enter</b> - concluir a criação - + Rotate objects Rotacionar objetos - - - + + + Close pattern Fechar molde @@ -11892,12 +11917,12 @@ Você quer salvar suas mudanças? Ponteiro da ferramenta - + Midpoint between two points Ponto intermediário entre dois pontos - + Group Grupo @@ -11918,8 +11943,8 @@ Você quer salvar suas mudanças? Você não pode usar o modo Layout agora. Por favor, inclua pelo menos um detalhe no layout. - - + + Original zoom Zoom anterior @@ -11949,22 +11974,22 @@ Você quer salvar suas mudanças? Tamanho: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? O arquivo de medidas <br/><br/> <b>%1</b> <br/><br/> não pôde ser encontrado. Deseja atualizar o local do arquivo? - + Flipping objects by line Espelhando objetos através de linha - + Flipping objects by axis Espelhando objetos através do eixo - + Move objects Mover objetos @@ -11983,7 +12008,7 @@ Você quer salvar suas mudanças? As medidas foram sincronizadas - + Elliptical Arc Arco Elíptico @@ -12003,89 +12028,89 @@ Você quer salvar suas mudanças? Não foi possível salvar o arquivo - + read only somente leitura - + Variables Table Tabela de Variáveis - + Contains information about increments and internal variables Contém informações sobre incrementos e variáveis internas - + Load Individual Carregar Individual - + Load Individual measurements file Carregar arquivo de medições individuais - - + + Load Multisize Carregar Multisize - + Load multisize measurements file Carregar arquivos de medidas multisize - + Open Tape Abrir Tape - + Edit Current Editar atual - + Edit linked to the pattern measurements Editar vínculo para as medidas do molde - + Sync Sincronizar - + Synchronize linked to the pattern measurements after change Sincronize vínculo para as medidas do molde após alterações - + Unload Current Descarregar Atual - + Unload measurements if they were not used in a pattern file Descarregar medidas se não foi usado em um arquivo de molde - - + + Individual measurements Medidas individuais - - + + Multisize measurements Medidas multizise @@ -12096,7 +12121,7 @@ Você quer salvar suas mudanças? Arquivos de molde - + Pin tool Ferramenta de pino @@ -12106,17 +12131,17 @@ Você quer salvar suas mudanças? Selecionar o ponto de pino - + Insert node tool Inserir ferramenta de nó - + Open Tape app for creating or editing measurements file Abrir aplicativo Tape para criar ou editar arquivos de medidas - + Export increments to CSV Exportar incrementos para CSV @@ -12156,143 +12181,143 @@ Você quer salvar suas mudanças? Você ainda não pode usar o modo Layout. - + Zoom fit best current Zoom para o melhor ajuste - + zoom fit best current pattern piece zoom para o melhor ajuste da peça de modelagem - + Export details skiping the Layout stage Exportar detalhes ignorando o estágio de Layout - + You don't have enough details to export. Please, include at least one detail in layout. Você não tem detalhes suficientes para exportar. Por favor, inclua pelo menos um detalhe no layout. - + Export details Exportar detalhes - + Can't export details. Impossível exportar detalhes. - + Label template editor Editor de modelo de rótulo - + Workpiece tool Ferramenta de peça de trabalho - + Internal path tool Ferramenta de caminho interno - + Save &As… Salvar &Como… - + Report Bug… Reportar erro… - + Export As… Exportar Como… - + Save… Salvar… - + Final measurements Medidas finais - + Export Final Measurements to CSV Exportar as Medidas Finais para CSV - + You can't export empty scene. Please, include at least one detail in layout. Você não pode exportar cena vazia. Por favor, inclua pelo menos um detalhe no layout. - + Export final measurements error. Exportar o erro da medição final. - + Destination path is empty. O caminho de destino está vazio. - + Next pattern piece Próxima peça de modelagem - + Ctrl+PgDown Ctrl+PgDown - + Previous pattern piece Peça de modelagem anterior - + Ctrl+PgUp Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool Ferramenta de rótulo de lugar - + Duplicate detail tool Ferramenta de cópia de detalhe @@ -12302,7 +12327,7 @@ Você quer salvar suas mudanças? - + The measurements file '%1' could not be found or provides not enough information. O arquivo de medidas '%1' não foi encontrado ou não fornece informações suficientes. @@ -12322,17 +12347,17 @@ Você quer salvar suas mudanças? Mudanças aplicadas. - + Cannot save settings. Access denied. Acesso negado. Configuração não pode ser salva. - + Ctrl+O - + Cannot read settings from a malformed .INI file. Incapaz de ler configurações de arquivo .INI mal formado. @@ -12356,27 +12381,27 @@ Você quer salvar suas mudanças? - + Point of intersection circle and segment Ponto de interseção circulo e segmento - + Increase label font Aumentar fonte do rótulo - + Decrease label font Diminuir fonte do rótulo - + Original label font Fonte original do rótulo - + Hide labels Esconder rótulos @@ -12387,119 +12412,119 @@ Você quer salvar suas mudanças? Grupos de visibilidade - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle Ferramenta de caminho curvo que usa o ponto como alça de controle - + Point of intersection arc and axis Ponto de interseção arco e eixo - + Show main path Mostrar caminho principal - + Globally show pieces main path - - + + Pattern messages Mensagens Modelagem - + Clear all messages Limpar todas as mensagens - + Filter Filtrar - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark Marca D'água - + Load Carregar - + Remove Remover - + Edit current Editar atual - + Editor Editor - + Create or edit a watermark Criar ou editar marca d'água @@ -12509,37 +12534,37 @@ Você quer salvar suas mudanças? Arquivos de marca d'água - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update Atualizar - + Update manual layout @@ -12565,87 +12590,87 @@ Você quer salvar suas mudanças? Selecionar diretório - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -12730,38 +12755,38 @@ Você quer salvar suas mudanças? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled sem título - + All files Todos os arquivos - + Save Image - + Visibility group Grupo de Visibilidade - + Show accuracy radius @@ -12805,7 +12830,7 @@ Você quer salvar suas mudanças? Impossível continuar porque não existem impressoras disponíveis no seu sistema. - + unnamed não nomeado @@ -12818,7 +12843,7 @@ Você quer salvar suas mudanças? O layout não foi atualizado desde a última modificação do molde. Você deseja continuar? - + Couldn't prepare data for creation layout Não foi possível preparar dados para layout @@ -12859,90 +12884,90 @@ Você quer salvar suas mudanças? Impossível definir as margens da impressora - - + + Can't create a path Impossível criar um caminho - + Preparing details for layout Preparando detalhes para o layout - + Pattern Molde - + Name Nome - + Value Valor - - - + + + Export final measurements error. Exportar o erro da medição final. - + Value in line %1 is infinite or NaN. Please, check your calculations. O valor na linha %1 é infinito ou não é um número. Por favor, verifique seus cálculos. - + Parser error at line %1: %2. Erro de análise na linha %1: %2. - + File error %1. Erro de arquivo %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Uma ou mais peças de modelagem são maiores do que o formato de papel que você selecionou. Por favor, selecione um formato de papel maior. - + Description Descrição - + Measurement file has unknown format. Arquivo de medidas tem formato desconhecido. - + File error. Erro de arquivo. - + Measurement file doesn't include all required measurements. O arquivo de medidas não inclui todas as medidas necessárias. - + Please, additionally provide: %1 Por favor, forneça adicionalmente: %1 - + Timeout. - + Process has been stoped because of exception. @@ -12971,7 +12996,7 @@ Você quer salvar suas mudanças? MoveLabel - + move point label mova a etiqueta de ponto @@ -14471,14 +14496,14 @@ Esta opção terá um efeito após o reinício. Mudanças aplicadas. - + Can't convert toUInt parameter Impossível converter o parâmetro toUInt - + Can't convert toBool parameter Impossível converter o parâmetro toBool @@ -14489,7 +14514,7 @@ Esta opção terá um efeito após o reinício. Obteve parâmetro vazio - + Can't convert toDouble parameter @@ -14518,22 +14543,22 @@ Esta opção terá um efeito após o reinício. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Não foi possível calcular pique para ponto '%1' na peça '%2'. Margem de costura vazia. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. Não foi possível calcular pique para ponto '%1' na peça '%2'. Posição do pique não encontrada. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -14543,7 +14568,7 @@ Esta opção terá um efeito após o reinício. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -14587,13 +14612,13 @@ Esta opção terá um efeito após o reinício. Erro de análise: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. Peça '%1'. Margem de costura inválida. @@ -14603,7 +14628,7 @@ Esta opção terá um efeito após o reinício. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -14635,8 +14660,8 @@ Esta opção terá um efeito após o reinício. Impossível calcular tamanho do pique para ponto '%1'. Motivo: %2. - - + + Passmark '%1' is not part of piece '%2'. Pique '%1' não é parte da peça '%2'. @@ -14658,7 +14683,7 @@ Esta opção terá um efeito após o reinício. - + Can't convert toInt parameter @@ -14670,47 +14695,47 @@ Esta opção terá um efeito após o reinício. Nome da peça '%1' não é único. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. Segmento é muito curto. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -14738,39 +14763,39 @@ Esta opção terá um efeito após o reinício. - + No data for the height dimension. Sem dados para dimensão altura. - + No data for the size dimension. Sem dados para dimensão tamanho. - + No data for the hip dimension. Sem dados para dimensão quadril. - + No data for the waist dimension. Sem dados para dimensão cintura. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. Peça '%1'. Sentido do fio é inválido. @@ -14798,23 +14823,18 @@ Esta opção terá um efeito após o reinício. - + Cannot set printer margins Impossível definir as margens da impressora - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -14862,25 +14882,25 @@ Esta opção terá um efeito após o reinício. Você realmente deseja excluir? - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -14896,13 +14916,13 @@ Esta opção terá um efeito após o reinício. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -15458,7 +15478,7 @@ Esta opção terá um efeito após o reinício. - + 0 results 0 resultados @@ -15509,21 +15529,21 @@ Esta opção terá um efeito após o reinício. - + Name measurement column Nome - + Full name measurement column Nome completo - + Group measurement column Grupo @@ -15745,7 +15765,7 @@ Esta opção terá um efeito após o reinício. - + Import from CSV Importar de CSV @@ -15755,244 +15775,244 @@ Esta opção terá um efeito após o reinício. Exportar para CSV - + Show in Finder Mostrar no Localizador - + File '%1' doesn't exist! O arquivo '%1' não existe! - + File error. Erro de arquivo. - + untitled %1 sem título %1 - - + + untitled sem título - + read only somente leitura - - + + Known measurements - + All files Todos os arquivos - + Could not save the file Não foi possível salvar o arquivo - + known measurements - + Save as Salvar como - + Failed to lock. This file already opened in another window. Falha ao bloquear. Este arquivo já foi aberto em outra janela. - + Could not save file Não foi possível salvar o arquivo - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Falha ao bloquear. Este arquivo já foi aberto em outra janela. Expectativa de colisão ao executar 2 cópias do programa. - + Comma-Separated Values Valores separados por vírgula - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt Sobre Qt - + Empty Vazio - + File was not saved yet. O arquivo ainda não foi salvo. - + Unsaved changes Alterações não salvas - + Measurements have been modified. Do you want to save your changes? - + Save… Salvar… - + Save Salvar - + Don't Save Não salvar - + Cannot read settings from a malformed .INI file. Incapaz de ler configurações de arquivo .INI mal formado. - + Cannot save settings. Access denied. Acesso negado. Configuração não pode ser salva. - + Empty list Vazio - + Unknown measurement - + &New Window &Nova Janela - - + + Unnamed image %1 - + Open file Abrir arquivo - + Length units - + Degrees Graus - + None nenhum - + Measurement name is empty. - + Imported file must not contain the same name twice. O arquivo importado não poderá conter duas vezes o mesmo nome. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Fórmula - + Description measurement column Descrição - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. As medidas individuais necessitam pelo menos 2 colunas. @@ -16401,7 +16421,7 @@ Deseja salvar suas mudanças? - + Pattern unit: Unidade do molde: @@ -16522,19 +16542,19 @@ Deseja salvar suas mudanças? Excluir medida - + unknown gender desconhecido - + male gender masculino - + female gender feminino @@ -16842,38 +16862,38 @@ Deseja salvar suas mudanças? - - + + Name measurement column Nome - - + + Full name measurement column Nome completo - - + + Calculated value measurement column Valor calculado - + Formula measurement column Fórmula - + Base value measurement column Valor base @@ -17077,40 +17097,40 @@ Deseja salvar suas mudanças? nenhum - + Invalid link - + Known measurements %1 - - + + Description measurement column Descrição - - - + + + Shift measurement column - + Empty list Vazio - - - + + + %1 shift @@ -17127,22 +17147,22 @@ Deseja salvar suas mudanças? - + Millimeters Milímetros - + Inches Polegadas - + Centimeters Centímetros - + Degrees Graus @@ -17168,7 +17188,7 @@ Deseja salvar suas mudanças? - + 0 results 0 resultados @@ -18328,12 +18348,12 @@ Deseja salvar suas mudanças? - + None nenhum - + Known measurements %1 @@ -18643,27 +18663,22 @@ Deseja salvar suas mudanças? Impossível cortar esta spline - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19597,26 +19612,26 @@ Deseja salvar suas mudanças? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -19701,21 +19716,39 @@ Deseja salvar suas mudanças? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19727,12 +19760,12 @@ Deseja salvar suas mudanças? VCommandLine - + Path to custom measure file (export mode). Caminho para o arquivo de medida personalizado (modo de exportação). - + The measure file O arquivo de medida @@ -19741,7 +19774,7 @@ Deseja salvar suas mudanças? Número correspondente ao formato de saída (padrão = 0, modo de exportação): - + Format number Número do formato @@ -19750,18 +19783,18 @@ Deseja salvar suas mudanças? Número correspondente ao modelo de página (padrão = 0, modo de exportação): - - + + Template number Número do modelo - + The page width A largura da página - + The measure unit A unidade de medida @@ -19774,7 +19807,7 @@ Deseja salvar suas mudanças? Ângulo - + Auto crop unused length (export mode). Cortar automaticamente comprimento não usado (modo exportação). @@ -19791,7 +19824,7 @@ Deseja salvar suas mudanças? Unidades de layout (como um papel exceto px, modo expotação). - + The unit A unidade @@ -19808,7 +19841,7 @@ Deseja salvar suas mudanças? Largura de intervalo x2, medidos nas unidades de layout. (modo de exportação). - + The gap width A largura do intervalo @@ -19817,7 +19850,7 @@ Deseja salvar suas mudanças? Define o agrupamento do layout (modo de exportação): - + Grouping type Tipo de agrupamento @@ -19826,7 +19859,7 @@ Deseja salvar suas mudanças? Não é possível usar o formato da página e tamanho/unidades de página explícita em conjunto. - + Page height, width, units must be used all 3 at once. Altura da página, largura, unidades devem ser usadas 3 ao mesmo tempo. @@ -19841,7 +19874,7 @@ Deseja salvar suas mudanças? - + Unsupported paper units. Unidades de papel não suportadas. @@ -19851,8 +19884,8 @@ Deseja salvar suas mudanças? Unidades de layout não suportadas. - - + + Export options can be used with single input file only. As opções de exportação podem ser usadas apenas com um único arquivo de entrada. @@ -19861,17 +19894,17 @@ Deseja salvar suas mudanças? Execute o programa em um modo de teste. O programa deste modo carrega um único arquivo de padrão e sai silenciosamente sem mostrar a janela principal. A chave tem prioridade antes da chave '%1'. - + Test option can be used with single input file only. A opção de teste pode ser usada somente com um único arquivo de entrada. - + The base filename of exported layout files. Use it to enable console export mode. O nome do arquivo base dos arquivos de layout exportados. Use-o para ativar o modo de exportação console. - + The base filename of layout files O nome do arquivo base dos arquivos de layout @@ -19880,7 +19913,7 @@ Deseja salvar suas mudanças? O caminho para a pasta de destino de saída. - + The destination folder A pasta de destino @@ -19901,12 +19934,12 @@ Deseja salvar suas mudanças? O valor da altura - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Largura da página em unidades atuais como 12.0 (não pode ser usado com "%1", modo de exportação). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Altura da página em unidades atuais como 12.0 (não pode ser usado com "%1", modo de exportação). @@ -19937,52 +19970,52 @@ Deseja salvar suas mudanças? Ignorar margens de impressão (modo exportação). Defina todas as margens para 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margem esquerda da página em unidades atuais como 3.0 (modo de exportação). Se não estiver configurado, será usado o valor padrão da impressora. Ou 0 se nenhuma impressora for encontrada. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margem direita da página em unidades atuais como 3.0 (modo de exportação). Se não estiver configurado, será usado o valor padrão da impressora. Ou 0 se nenhuma impressora for encontrada. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margem de topo da página em unidades atuais como 3.0 (modo de exportação). Se não estiver configurado, será usado o valor padrão da impressora. Ou 0 se nenhuma impressora for encontrada. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Margem inferior da página em unidades atuais como 3.0 (modo de exportação). Se não estiver configurado, será usado o valor padrão da impressora. Ou 0 se nenhuma impressora for encontrada. - + Gap width must be used together with shift units. - + Left margin must be used together with page units. - + Right margin must be used together with page units. - + Top margin must be used together with page units. - + Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. @@ -20007,347 +20040,352 @@ Deseja salvar suas mudanças? Rotação em graus (um predefinido, modo de exportação). O valor padrão é 180. 0 é sem rotação. Valores válidos: %1. Cada valor mostra quantas vezes os detalhes serão girados. Por exemplo, 180 significam duas vezes (360/180 = 2) em 180 graus. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. União de páginas, se possível (modo de exportação). Valor máximo limitado pelo QImage que suporta apenas um máximo de 32768x32768 px. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Salvar o comprimento da folha se configurado (modo de exportação). A opção diz ao programa para usar o máximo possível da largura da folha. A qualidade do layout pode ser reduzida quando essa opção foi usada. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Number corresponding to output format (default = 0, export mode): - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Desabilite dimensionamento de dpi alta. Ligue está opção se tiver problema com o dimensionamento (por padrão dimensionamento habilitado). Alternativamente, você pode usar a variável de ambiente %1. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. Exportar para csv com cabeçalho. Desabilitado por padrão. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Especifique o codec que será usado para salvar dados. Lista de codecs suportados fornecidos pelo Qt. O valor padrão depende do sistema. No Windows, o codec será baseado no sistema local. Em sistemas Unix, o codec pode voltar a usar a biblioteca iconv se nenhum codec embutido para o código do idioma puder ser encontrado. Valores válidos para esta instalação: - + Codec name Nome do codec - + Specify csv separator character. Default value is '%1'. Valid characters: Especifique o caractere separador de csv. O valor padrão é '%1'. Caracteres válidos: - + Separator character Caractere separador - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file Caminho para arquivo csv - + Number corresponding to layout page template (default = 0, export mode): Número correspondente ao modelo da página de layout (padrão = 0, modo de exportação): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin margem esquerda - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin Margem direita - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin Margem superior - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin Margem inferior - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material Material do usuário - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height Altura da página - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time Hora - + Coefficient Coeficiente - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale Escala horizontal - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale Escala vertical - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -20372,47 +20410,47 @@ Deseja salvar suas mudanças? - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -20422,7 +20460,7 @@ Deseja salvar suas mudanças? - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -20740,7 +20778,7 @@ Deseja salvar suas mudanças? VLayoutConverter - + Could not change version. Não foi possível alterar a versão. @@ -20753,73 +20791,73 @@ Deseja salvar suas mudanças? Impossível salvar arquivo '%1'. Erro: %2. - + Cannot set printer page size Impossível definir tamanho da página - + Cannot set printer margins Impossível definir as margens da impressora - + Can't open file '%1' Impossível abrir arquivo '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 Criação do arquivo '%1' falhou! %2 - + Can't create an AAMA dxf file. Impossível criar um arquivo AAMA dxf. - + Can't create an ASTM dxf file. Impossível criaram arquivo ASTM dxf. - - + + Can't create an HP-GL file. - + (flat) files arquivos (flat) - + files arquivos - + Image files Arquivos de imagem - + tiled - + Numerical control - + Raw Layout Data @@ -20832,12 +20870,12 @@ Deseja salvar suas mudanças? VLayoutPiece - + Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21141,8 +21179,8 @@ Deseja salvar suas mudanças? - - + + Pieces of @@ -21245,12 +21283,12 @@ Deseja salvar suas mudanças? VPGraphicsPiece - + Move to - + Remove from Sheet @@ -21266,37 +21304,37 @@ Deseja salvar suas mudanças? VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -21348,7 +21386,7 @@ Deseja salvar suas mudanças? - + Properties @@ -21505,9 +21543,9 @@ Deseja salvar suas mudanças? - - - + + + Export Exportar @@ -21557,84 +21595,84 @@ Deseja salvar suas mudanças? Aviso de peças fora dos limites - + zoom ampliar - - + + Scale Escala - + &Open &Abrir - + &Save &Salvar - + Save &As Salvar &Como - + &Import Raw Layout Data &Importar Dados de Layout Crus - + E&xit S&air - + &New &Novo - + About &Qt Sobre &Qt - + About &Puzzle Sobre &Quebra cabeças - + Zoom in Ampliar - + Zoom out Reduzir - + Zoom 1:1 Ampliar 1:1 - + Zoom fit best Ajustar à janela - + Zoom sheet Ampliar folha - - + + Preferences Preferências @@ -21655,7 +21693,7 @@ Deseja salvar suas mudanças? Incapaz de criar layout. - + Could not extract data from file '%1'. %2 Não foi capaz de extrair dados de arquivo '%1'. %2 @@ -21678,102 +21716,102 @@ Deseja salvar suas mudanças? Polegadas - + Scale: Escala: - + untitled %1.vlt sem título %1.vlt - + untitled.vlt sem_título.vlt - + read only somente leitura - + Cannot read settings from a malformed .INI file. Incapaz de ler configurações de arquivo .INI mal formado. - + Cannot save settings. Access denied. Acesso negado. Configuração não pode ser salva. - - - + + + Failed to open file, is it writable? Incapaz de abrir arquivo, arquivo apenas em modo leitura? - + &New Window &Nova Janela - + Layout has been modified. Do you want to save your changes? - - + + Layout files Arquivos de layout - - - + + + Open file Abrir arquivo - + Could not save the file Não foi possível salvar o arquivo - + layout layout - + Save as Salvar como - + Failed to lock. This file already opened in another window. Falha ao bloquear. Este arquivo já foi aberto em outra janela. - + Could not save file Não foi possível salvar o arquivo - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Falha ao bloquear. Este arquivo já foi aberto em outra janela. Expectativa de colisão ao executar 2 cópias do programa. - + Raw Layout files Arquivos de layout crus - + About Qt Sobre Qt @@ -21810,13 +21848,13 @@ Deseja salvar suas mudanças? - + Horizontal: Horizontal: - + Vertical: Vertical: @@ -21899,71 +21937,76 @@ Deseja salvar suas mudanças? - + + Boundary together with notches + + + + Pieces gap: Intervalo de peças: - + Export Layout Exportar Layout - + Undo commands Desfazer comandos - + Add Sheet Adicionar Folha - - + + Print Imprimir - - + + Print preview Imprimir visualização - - + + Print tiled Imprimir lado a lado - - + + Print preview tiled Pré visualização de impressão lado a lado - + Editor Editor - + Create or edit a watermark Criar ou editar marca d'água - + Edit current Editar atual - + Load Carregar - + Remove Remover @@ -21974,13 +22017,13 @@ Deseja salvar suas mudanças? - + &Undo &Desfazer - + &Redo &Refazer @@ -21991,113 +22034,113 @@ Deseja salvar suas mudanças? Píxels - + Unsaved changes Alterações não salvas - + Save… Salvar… - + Save Salvar - + Don't Save Não salvar - - + + Can't create a path Impossível criar um caminho - + Can't open file '%1' Impossível abrir arquivo '%1' - - + + Failed in flushing page to disk, disk full? Falhou em mover a página ao disco, disco cheio? - - + + The layout is invalid. O layout é inválido. - + The layout is invalid. Piece out of bound. Do you want to continue export? O layout é inválido. Peça está fora dos limites. Você quer continuar exportando? - + The layout is invalid. Pieces superposition. Do you want to continue export? Layout é inválido. Peças em superposição. Você quer continuar exportando? - + Sheet %1 Folha %1 - + translate pieces traduzir peças - + rotate pieces girar peças - - + + For printing multipages document all sheet should have the same size. Para imprimir documentos de várias páginas, todas as folhas devem ter o mesmo tamanho. - - - - - - - - + + + + + + + + Print error Erro de impressão - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Impossível continuar porque não existem impressoras disponíveis no seu sistema. - + Watermark files Arquivos de marca d'água - - - - + + + + Unable to get sheet page settings Incapaz de obter configurações da folha da página @@ -22107,27 +22150,27 @@ Deseja salvar suas mudanças? - + Z value - + Bottom - + Down - + Up - + Top @@ -22137,12 +22180,12 @@ Deseja salvar suas mudanças? - + sheet - + Piece %1 invalid. %2 @@ -22283,37 +22326,37 @@ Deseja salvar suas mudanças? Erro ao criar ou atualizar detalhe - + Error creating or updating single point Erro ao criar ou atualizar ponto único - - + + Error creating or updating point of end line Erro ao criar ou atualizar ponto final da linha - - + + Error creating or updating point along line Erro ao criar ou atualizar ponto ao longo da linha - - + + Error creating or updating point of shoulder Erro ao criar ou atualizar ponto de ombro - - + + Error creating or updating point of normal Erro ao criar ou atualizar ponto de normal - - + + Error creating or updating point of bisector Erro ao criar ou atualizar ponto de bissetriz @@ -22322,128 +22365,128 @@ Deseja salvar suas mudanças? Erro ao criar ou atualizar ponto de interseção de linha - - + + Error creating or updating point of contact Erro ao criar ou atualizar ponto de contato - + Error creating or updating modeling point Erro ao criar ou atualizar ponto de modelagem - + Error creating or updating height Erro ao criar ou atualizar altura - + Error creating or updating triangle Erro ao criar ou atualizar triângulo - + Error creating or updating point of intersection Erro ao criar ou atualizar ponto de interseção - - + + Error creating or updating cut spline point Erro ao criar ou atualizar ponto de corte de spline - - + + Error creating or updating cut spline path point Erro ao criar ou atualizar ponto de corte do caminho da spline - - + + Error creating or updating cut arc point Erro ao criar ou atualizar ponto de corte do arco - - + + Error creating or updating point of intersection line and axis Erro ao criar ou atualizar ponto de interseção entre linha e eixo - - + + Error creating or updating point of intersection curve and axis Erro ao criar ou atualizar ponto de interseção entre curva e eixo - + Error creating or updating line Erro ao criar ou atualizar linha - - + + Error creating or updating simple curve Erro ao criar ou atualizar curva simples - - + + Error creating or updating curve path Erro ao criar ou atualizar caminho de curva - + Error creating or updating modeling simple curve Erro ao criar ou atualizar curva simples de modelagem - + Error creating or updating modeling curve path Erro ao criar ou atualizar caminho de curva de modelagem - - - - + + + + Error creating or updating simple arc Erro ao criar ou atualizar arco simples - + Error creating or updating modeling arc Erro ao criar ou atualizar arco de modelagem - + Error creating or updating union details Erro ao criar ou atualizar união de detalhes - + Error creating or updating point of intersection arcs Erro ao criar ou atualizar ponto de interseção de arcos - + Error creating or updating point of intersection circles Erro ao criar ou atualizar ponto de interseção de círculos - + Error creating or updating point from circle and tangent Erro ao criar ou atualizar ponto de círculo e tangente - + Error creating or updating point from arc and tangent Erro ao criar ou atualizar ponto de arco e tangente - + Error creating or updating true darts Erro ao criar ou atualizar pences verdadeiras @@ -22460,17 +22503,17 @@ Deseja salvar suas mudanças? Tipo de ponto desconhecido '%1'. - + Unknown spline type '%1'. Tipo de spline desconhecido '%1'. - + Unknown arc type '%1'. Tipo de arco desconhecido '%1'. - + Unknown tools type '%1'. Tipo de ferramentas desconhecidos '%1'. @@ -22480,75 +22523,75 @@ Deseja salvar suas mudanças? Erro sem identificação única. - + Error creating or updating point of intersection curves Erro ao criar ou atualizar ponto de interseção de curvas - + Error creating or updating simple interactive spline Erro ao criar ou atualizar spline interativa simples - + Error creating or updating interactive spline path Erro ao criar ou atualizar caminho spline interativa - + Error creating or updating cubic bezier curve Erro ao criar ou atualizar a curva do bezier cúbico - + Error creating or updating cubic bezier path curve Erro ao criar ou atualizar caminho da curva de bezier cúbico - - + + Error creating or updating operation of rotation Erro ao criar ou atualizar a operação de rotação - + Unknown operation type '%1'. Tipo de operação desconhecida '%1'. - + Error creating or updating operation of flipping by line Erro ao criar ou atualizar operação de espelhar através de linha - + Error creating or updating operation of flipping by axis Erro ao criar ou atualizar operação de espelar através de eixo - - + + Error creating or updating operation of moving Erro ao criar ou atualizar operação de mover - + Error creating or updating point of line intersection Erro ao criar ou atualizar ponto de interseção da linha - - + + Error creating or updating simple elliptical arc Erro ao criar ou atualizar arco elíptico simples - + Unknown elliptical arc type '%1'. Tipo de arco elíptico desconhecido '%1'. - + Error creating or updating modeling elliptical arc Erro ao criar ou atualizar arco elíptico de modelagem @@ -22558,34 +22601,34 @@ Deseja salvar suas mudanças? Detalhe - + Unnamed path Caminho sem nome - - + + Error creating or updating a piece path Erro ao criar ou atualizar o caminho da peça - + Error creating or updating pin point Erro ao criar ou atualizar ponto de pino - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -24364,108 +24407,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance Margem de costura atual - + move pattern piece label mover rótulo da peça de modelagem - + resize pattern piece label redimensionar o rótulo da peça de modelagem - + rotate pattern piece label rotacionar o rótulo da peça de modelagem - + move pattern info label mover o rótulo de informações do molde - + resize pattern info label redimensionar o rótulo de informações do molde - + rotate pattern info label rotacionar o rótulo de informações do molde - + move grainline mover fio - + resize grainline redimensionar fio - + rotate grainline rotacionar fio - + Options Opções - + In layout No layout - + Hide main path Ocultar caminho principal - + Reset piece label template - + Delete Excluir - + apply save detail options aplicar salvar opções de detalhes - + multi deletion exclusão múltipla - + Forbid flipping Proibido girar - + Force flipping Forçar giro - + This id (%1) is not unique. Esta id (%1) não é única. - + Tool was used after deleting. Ferramenta foi utilizada após apagar. diff --git a/share/translations/valentina_ro_RO.ts b/share/translations/valentina_ro_RO.ts index 578cc8560..0d1e050a2 100644 --- a/share/translations/valentina_ro_RO.ts +++ b/share/translations/valentina_ro_RO.ts @@ -1297,22 +1297,22 @@ Move on top - Deplasați-vă în partea de sus + Deplasați-vă în partea de sus Move up - Deplasare în sus + Deplasare în sus Move down - Deplasarea în jos + Deplasarea în jos Move on bottom - Deplasați-vă în partea de jos + Deplasați-vă în partea de jos @@ -4724,40 +4724,40 @@ Principiul alegerii piesei următoare - + Three groups: big, middle, small Trei grupuri: mare, mijlociu, mic - + Two groups: big, small Două grupuri: mare, mic - + Descending area Zonă descendentă - - + + Millimiters Milimetrii - - + + Centimeters Centimetrii - - + + Inches Inci - + Pixels Pixeli @@ -4767,22 +4767,22 @@ - + Auto crop unused length - + Unite pages (if possible) - + Gap width: - + Save length of the sheet @@ -4817,12 +4817,12 @@   - + Wrong fields. - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4830,32 +4830,32 @@ - + Layout options - + Rule for choosing the next workpiece - + Divide into strips - + Multiplier - + Set multiplier for length of the biggest workpiece in layout. - + Enabling for sheets that have big height will speed up creating. @@ -4865,7 +4865,7 @@ - + None Printer Niciunul @@ -4896,70 +4896,85 @@ - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -7693,7 +7708,7 @@ Apply settings anyway? - + File name: @@ -7718,8 +7733,8 @@ Apply settings anyway? - - + + File base name @@ -7745,37 +7760,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins - + Right: - + Left: - + Top: - + Bottom: - + Paper format @@ -7785,20 +7805,20 @@ Apply settings anyway? - - - - + + + + cm cm - + Templates: Șabloane: - + Orientation: @@ -7808,17 +7828,17 @@ Apply settings anyway? Opțiuni - + Scale - + Horizontal: - + Vertical: @@ -9277,22 +9297,22 @@ Apply settings anyway? Move on top - Deplasați-vă în partea de sus + Deplasați-vă în partea de sus Move up - Deplasare în sus + Deplasare în sus Move down - Deplasarea în jos + Deplasarea în jos Move on bottom - Deplasați-vă în partea de jos + Deplasați-vă în partea de jos @@ -10043,27 +10063,27 @@ Apply settings anyway? Punct - + Point along perpendicular Punct de-a lungul unei perpendiculare - + Perpendicular point along line Punct perpendicular pe linie - + Point along bisector Punct de-a lungul bisectorului - + Point at distance and angle Punct la distanță și unghi - + Point at distance along line Punct la distanță de-a lungul liniei @@ -10076,12 +10096,12 @@ Apply settings anyway? Linie - + Line between points Linie între puncte - + Point at line intersection Punct la linia de intersecție @@ -10098,7 +10118,7 @@ Apply settings anyway? Instrumente pentru crearea de arce. - + Arc Curbura @@ -10126,210 +10146,215 @@ Apply settings anyway? &Piesă tipar - + Measurements Măsurători - + Window Fereastră - + Toolbar files Bara de instrumente pentru fișiere - + ToolBar modes Moduri ale Bării de instrumente - + Toolbar pattern Model de Bară de instrumente - + Toolbar options Opțiuni ale Bării de instrumente - + Toolbar tools Instrumente ale Bării de instrumente - + Tool options Opțiunile instrumentului - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New Nou - + &New & Nou - + Create a new pattern Crează un tipar nou - + Open Deschide - + &Open &Deschide - + Open file with pattern Deschide fișier cu tipar - - + + Save Salvează - + &Save &Salvează - + Save pattern Salvează tipar - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Salvează &Ca și..... - + Save not yet saved pattern Salvează tiparul care încă nu este salvat - + Draw Trage - + Details Detalii - + Pointer tools Instrumente indicator - + New pattern piece Piesă nouă de tipar - + Add new pattern piece Adaugă o nouă piesă de tipar - + Change the label of pattern piece Schimbă denumirea piesei de tipar @@ -10342,57 +10367,57 @@ Apply settings anyway? Tabele de variabile - - + + History Decurs - + About &Qt Despre&Qt - + &About Valentina & Despre Valentina - + E&xit E&xit - + Exit the application Ieși din aplicație - + Preferences Preferințe - + Pattern properties Proprietăți tipar - - + + Zoom in Mărește - + zoom in mărește - - - + + + Zoom out Micșorează @@ -10409,7 +10434,7 @@ Apply settings anyway? Zoom Original - + Zoom fit best Zoom se potrivesc cel mai bine @@ -10426,7 +10451,7 @@ Apply settings anyway? Raportează o Eroare... - + Report bug Raportează o eroare @@ -10443,8 +10468,8 @@ Apply settings anyway? Arată ajutorul online - - + + Pattern piece %1 Piesă Tipar %1 @@ -10537,7 +10562,7 @@ Apply settings anyway? Alege curbă - + About Qt Despre Qt @@ -10577,7 +10602,7 @@ Apply settings anyway? - + Open file Deschide fișier @@ -10594,7 +10619,7 @@ Apply settings anyway? - + Error empty parameter. @@ -10610,39 +10635,39 @@ Apply settings anyway? - + Bad id. - + File saved - + untitled.val - + &Undo &Anulare - + &Redo - + Pattern piece: - + Enter a new label for the pattern piece. @@ -10653,18 +10678,18 @@ Apply settings anyway? - - + + File error. Eroare de fișier. - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? - + Reopen files. @@ -10677,52 +10702,52 @@ Apply settings anyway? Măsuri individuale (* .vit) - + Special point on shoulder Punct special la umăr - + Triangle tool Instrument triunghi - + Point from X and Y of two other points - + Point intersect line and axis Punctul intersectează linia și axa - + Simple curve Curbă simplă - + Curved path Traiectorie curbată - + Segmenting a simple curve Segmentarea unei simple curburi - + Segment a curved path Segmentare traseu curbat - + Point intersect curve and axis Punctul intersectează cubrura și axa - + Segment an arc Segmentează o curbură @@ -10731,17 +10756,17 @@ Apply settings anyway? Instrument pentru adaos la cusătură - + Union tool Instrument Uniune - + Last Tool - + Activate last used tool again @@ -10751,94 +10776,94 @@ Apply settings anyway? - + Mode - + Pointer - + Config pattern piece - + Layout - + Show Curve Details - + Show/hide control points and curve direction - + Point of intersection arcs - + Point of intersection circles - + Point from circle and tangent - + Point from arc and tangent - + Arc with given length - + Layout pages - + Print - + Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) - + Print preview - + Print preview original layout - - + + Export original layout @@ -10868,12 +10893,12 @@ Apply settings anyway? - + Layout mode - + Unsaved changes @@ -10884,12 +10909,12 @@ Apply settings anyway? - + You can't export empty scene. - + Create new Layout @@ -10904,7 +10929,7 @@ Apply settings anyway? - + Measurement file has unknown format. @@ -10919,68 +10944,68 @@ Apply settings anyway? - + Couldn't update measurements. - - + + The measurements file '%1' could not be found. - + Loading measurements file - - - + + + The method %1 does nothing in GUI mode - - - - + + + + Export error. - + Please, provide one input file. - + Print an original layout - + Preview tiled PDF - + Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -10995,7 +11020,7 @@ Apply settings anyway? - + True darts @@ -11015,7 +11040,7 @@ Apply settings anyway? - + Don't Save @@ -11032,7 +11057,7 @@ Apply settings anyway? S-a întâmplat o eroare necunoscută, de exemplu, o partiție completă a împiedicat scrierea fișierului de blocare. Ignorați dacă doriți să continuați (nerecomandat, poate provoca o deteriorare a datelor). - + Point intersection curves @@ -11042,7 +11067,7 @@ Apply settings anyway? - + Curve tool which uses point as control handle @@ -11057,24 +11082,24 @@ Apply settings anyway? - + Rotate objects - - - + + + Close pattern - + Midpoint between two points - + Group @@ -11091,8 +11116,8 @@ Apply settings anyway? - - + + Original zoom @@ -11114,22 +11139,22 @@ Apply settings anyway? - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line - + Flipping objects by axis - + Move objects @@ -11144,7 +11169,7 @@ Apply settings anyway? - + Elliptical Arc @@ -11164,89 +11189,89 @@ Apply settings anyway? - + read only - + Variables Table - + Contains information about increments and internal variables - + Load Individual - + Load Individual measurements file - - + + Load Multisize - + Load multisize measurements file - + Open Tape - + Edit Current - + Edit linked to the pattern measurements - + Sync - + Synchronize linked to the pattern measurements after change - + Unload Current - + Unload measurements if they were not used in a pattern file - - + + Individual measurements Măsuri individuale - - + + Multisize measurements @@ -11257,7 +11282,7 @@ Apply settings anyway? - + Pin tool @@ -11267,17 +11292,17 @@ Apply settings anyway? - + Insert node tool - + Open Tape app for creating or editing measurements file - + Export increments to CSV @@ -11317,143 +11342,143 @@ Apply settings anyway? - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements Măsurători finale - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Tool "Select" - + Layout settings - + Layout export as - + Place label tool - + Duplicate detail tool @@ -11463,7 +11488,7 @@ Apply settings anyway? - + The measurements file '%1' could not be found or provides not enough information. @@ -11483,17 +11508,17 @@ Apply settings anyway? - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -11517,27 +11542,27 @@ Apply settings anyway? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -11548,119 +11573,119 @@ Apply settings anyway? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove Depărta - + Edit current - + Editor - + Create or edit a watermark @@ -11670,37 +11695,37 @@ Apply settings anyway? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update Actualiza - + Update manual layout @@ -11726,87 +11751,87 @@ Apply settings anyway? - + The pattern has been modified. Do you want to save your changes? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Shop - + Scalable Vector Graphics files - + Save draw - + Draw export - + Background images - + Add background image @@ -11891,38 +11916,38 @@ Apply settings anyway? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled - + All files - + Save Image - + Visibility group - + Show accuracy radius @@ -11930,12 +11955,12 @@ Apply settings anyway? MainWindowsNoGUI - + unnamed - + Couldn't prepare data for creation layout Nu s-au putut pregăti datele pentru crearea unei schițe @@ -11944,90 +11969,90 @@ Apply settings anyway? Mai multe piese au rămas nearanjate, dar nici una dintre ele nu se potrivesc pentru hârtie - - + + Can't create a path - + Preparing details for layout - + Pattern Model - + Name Nume - + Value Valoare - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description Descriere - + Measurement file has unknown format. - + File error. Eroare de fișier. - + Measurement file doesn't include all required measurements. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -12056,7 +12081,7 @@ Apply settings anyway? MoveLabel - + move point label @@ -13399,14 +13424,14 @@ This option will take an affect after restart. - + Can't convert toUInt parameter - + Can't convert toBool parameter @@ -13417,7 +13442,7 @@ This option will take an affect after restart. - + Can't convert toDouble parameter @@ -13446,22 +13471,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -13471,7 +13496,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -13515,13 +13540,13 @@ This option will take an affect after restart. Eroare Parser: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -13531,7 +13556,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -13563,8 +13588,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -13586,7 +13611,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -13598,47 +13623,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -13666,39 +13691,39 @@ This option will take an affect after restart. - + No data for the height dimension. Nu există date pentru dimensiunea înălțimii. - + No data for the size dimension. Nu există date pentru dimensiunea dimensiunii. - + No data for the hip dimension. Nu există date pentru dimensiunea șoldului. - + No data for the waist dimension. Nu există date pentru dimensiunea taliei. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -13726,23 +13751,18 @@ This option will take an affect after restart. - + Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -13790,25 +13810,25 @@ This option will take an affect after restart. - + No data for the X dimension. Nu există date pentru dimensiunea X. - + No data for the Y dimension. Nu există date pentru dimensiunea Y. - + No data for the Z dimension. Nu există date pentru dimensiunea Z. - + No data for the W dimension. Nu există date pentru dimensiunea W. @@ -13824,13 +13844,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -14358,7 +14378,7 @@ This option will take an affect after restart. - + 0 results 0 rezultate @@ -14409,21 +14429,21 @@ This option will take an affect after restart. - + Name measurement column Nume - + Full name measurement column Numele complet - + Group measurement column @@ -14645,7 +14665,7 @@ This option will take an affect after restart. - + Import from CSV @@ -14655,244 +14675,244 @@ This option will take an affect after restart. - + Show in Finder - + File '%1' doesn't exist! - + File error. Eroare de fișier. - + untitled %1 - - + + untitled - + read only - - + + Known measurements - + All files - + Could not save the file - + known measurements - + Save as Salvează ca și - + Failed to lock. This file already opened in another window. - + Could not save file Nu s-a putut salva fișierul - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt Despre Qt - + Empty - + File was not saved yet. - + Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save Salvează - + Don't Save - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list - + Unknown measurement - + &New Window - - + + Unnamed image %1 - + Open file Deschide fișier - + Length units - + Degrees - + None Niciunul - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column Formula - + Description measurement column Descriere - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -15215,7 +15235,7 @@ This option will take an affect after restart. - + Pattern unit: @@ -15284,19 +15304,19 @@ This option will take an affect after restart. - + unknown gender - + male gender masculin - + female gender feminin @@ -15536,38 +15556,38 @@ This option will take an affect after restart. - - + + Name measurement column Nume - - + + Full name measurement column Numele complet - - + + Calculated value measurement column - + Formula measurement column Formula - + Base value measurement column Valoarea de bază @@ -15771,40 +15791,40 @@ This option will take an affect after restart. Niciunul - + Invalid link - + Known measurements %1 - - + + Description measurement column Descriere - - - + + + Shift measurement column - + Empty list - - - + + + %1 shift @@ -15821,22 +15841,22 @@ This option will take an affect after restart. - + Millimeters - + Inches Inci - + Centimeters Centimetrii - + Degrees @@ -15862,7 +15882,7 @@ This option will take an affect after restart. - + 0 results 0 rezultate @@ -16983,12 +17003,12 @@ This option will take an affect after restart. - + None Niciunul - + Known measurements %1 @@ -17257,27 +17277,22 @@ This option will take an affect after restart. - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -18200,26 +18215,26 @@ This option will take an affect after restart. VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -18304,21 +18319,39 @@ This option will take an affect after restart. VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -18330,33 +18363,33 @@ This option will take an affect after restart. VCommandLine - + Path to custom measure file (export mode). - + The measure file - + Format number - - + + Template number - + The page width - + The measure unit @@ -18365,27 +18398,27 @@ This option will take an affect after restart. Unghi - + Auto crop unused length (export mode). - + The unit - + The gap width - + Grouping type - + Page height, width, units must be used all 3 at once. @@ -18396,7 +18429,7 @@ This option will take an affect after restart. - + Unsupported paper units. @@ -18406,38 +18439,38 @@ This option will take an affect after restart. - - + + Export options can be used with single input file only. - + Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files - + The destination folder - + Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -18452,397 +18485,402 @@ This option will take an affect after restart. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Gap width must be used together with shift units. - + Left margin must be used together with page units. - + Right margin must be used together with page units. - + Top margin must be used together with page units. - + Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Number corresponding to output format (default = 0, export mode): - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material Materialul utilizatorului - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time Numele companiei sau numele designerului - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -18867,47 +18905,47 @@ This option will take an affect after restart. - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -18917,7 +18955,7 @@ This option will take an affect after restart. - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -19192,7 +19230,7 @@ This option will take an affect after restart. VLayoutConverter - + Could not change version. @@ -19205,73 +19243,73 @@ This option will take an affect after restart. - + Cannot set printer page size - + Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -19284,12 +19322,12 @@ This option will take an affect after restart. VLayoutPiece - + Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -19593,8 +19631,8 @@ This option will take an affect after restart. - - + + Pieces of @@ -19686,12 +19724,12 @@ This option will take an affect after restart. VPGraphicsPiece - + Move to - + Remove from Sheet @@ -19707,37 +19745,37 @@ This option will take an affect after restart. VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -19789,7 +19827,7 @@ This option will take an affect after restart. - + Properties @@ -19946,9 +19984,9 @@ This option will take an affect after restart. - - - + + + Export Export @@ -19998,84 +20036,84 @@ This option will take an affect after restart. - + zoom - - + + Scale - + &Open &Deschide - + &Save &Salvează - + Save &As - + &Import Raw Layout Data - + E&xit E&xit - + &New & Nou - + About &Qt Despre&Qt - + About &Puzzle - + Zoom in Mărește - + Zoom out Micșorează - + Zoom 1:1 - + Zoom fit best Zoom se potrivește cel mai bine - + Zoom sheet - - + + Preferences Preferințe @@ -20096,7 +20134,7 @@ This option will take an affect after restart. - + Could not extract data from file '%1'. %2 @@ -20119,102 +20157,102 @@ This option will take an affect after restart. Inci - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file Deschide fișier - + Could not save the file - + layout - + Save as Salvează ca și - + Failed to lock. This file already opened in another window. - + Could not save file Fișierul nu a putut fii salvat - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt Despre Qt @@ -20251,13 +20289,13 @@ This option will take an affect after restart. - + Horizontal: - + Vertical: @@ -20340,71 +20378,76 @@ This option will take an affect after restart. - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print - - + + Print preview - - + + Print tiled - - + + Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove Depărta @@ -20415,13 +20458,13 @@ This option will take an affect after restart. - + &Undo &Anulare - + &Redo @@ -20432,113 +20475,113 @@ This option will take an affect after restart. Pixeli - + Unsaved changes - + Save… - + Save Salvează - + Don't Save - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -20548,27 +20591,27 @@ This option will take an affect after restart. - + Z value - + Bottom - + Down - + Up - + Top @@ -20578,12 +20621,12 @@ This option will take an affect after restart. - + sheet - + Piece %1 invalid. %2 @@ -20720,163 +20763,163 @@ This option will take an affect after restart. - + Error creating or updating single point - - + + Error creating or updating point of end line - - + + Error creating or updating point along line - - + + Error creating or updating point of shoulder - - + + Error creating or updating point of normal - - + + Error creating or updating point of bisector - - + + Error creating or updating point of contact - + Error creating or updating modeling point - + Error creating or updating height - + Error creating or updating triangle - + Error creating or updating point of intersection - - + + Error creating or updating cut spline point - - + + Error creating or updating cut spline path point - - + + Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis - + Error creating or updating line - - + + Error creating or updating simple curve - - + + Error creating or updating curve path - + Error creating or updating modeling simple curve - + Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc - + Error creating or updating modeling arc - + Error creating or updating union details - + Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent - + Error creating or updating true darts @@ -20893,17 +20936,17 @@ This option will take an affect after restart. - + Unknown spline type '%1'. - + Unknown arc type '%1'. - + Unknown tools type '%1'. @@ -20913,75 +20956,75 @@ This option will take an affect after restart. - + Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline - + Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation - + Unknown operation type '%1'. - + Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving - + Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc @@ -20991,34 +21034,34 @@ This option will take an affect after restart. Detalii - + Unnamed path - - + + Error creating or updating a piece path - + Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -22653,108 +22696,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance - + move pattern piece label - + resize pattern piece label - + rotate pattern piece label - + move pattern info label - + resize pattern info label - + rotate pattern info label - + move grainline - + resize grainline - + rotate grainline - + Options Opțiuni - + In layout - + Hide main path - + Reset piece label template - + Delete Șterge - + apply save detail options - + multi deletion - + Forbid flipping Interziceți răsturnarea - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting. diff --git a/share/translations/valentina_uk_UA.ts b/share/translations/valentina_uk_UA.ts index c89a103d7..20e1b3bc2 100644 --- a/share/translations/valentina_uk_UA.ts +++ b/share/translations/valentina_uk_UA.ts @@ -1291,27 +1291,27 @@ New point: - + Нова точка: Move on top - Перемістити на вершину + Перемістити на вершину Move up - Перемістити вгору + Перемістити вгору Move down - Перемістити вниз + Перемістити вниз Move on bottom - Перемістити до низу + Перемістити до низу @@ -2539,7 +2539,7 @@ Measurements file name - + Ім'я файлу вимірювань @@ -2586,7 +2586,7 @@ Measurements extension - + Розширення мірок @@ -4767,40 +4767,40 @@ Принцип вибору наступної деталі - + Three groups: big, middle, small Три групи: великі, середні, малі - + Two groups: big, small Дві групи: великі, малі - + Descending area За спаданням площі - - + + Millimiters Міліметри - - + + Centimeters Сантиметри - - + + Inches Дюйми - + Pixels Пікселі @@ -4810,22 +4810,22 @@ Створити розкладку - + Auto crop unused length Автоматично обрізати невикористану довжину - + Unite pages (if possible) Об'єднати сторінки (якщо можливо) - + Gap width: Ширина розриву: - + Save length of the sheet Зберегти довжину аркуша @@ -4907,7 +4907,7 @@ Користувацький - + Wrong fields. Неправильні поля. @@ -4920,7 +4920,7 @@ Apply settings anyway? Усе одно застосувати налаштування? - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4931,7 +4931,7 @@ Apply settings anyway? ⇥За зменшенням площі = 2 - + Layout options Параметри розкладки @@ -4940,7 +4940,7 @@ Apply settings anyway? Довжина зміщення: - + Rule for choosing the next workpiece Принцип вибору настпної деталі @@ -4949,17 +4949,17 @@ Apply settings anyway? Увімкнення для листів, що мають велику довжину пришвидшує створення. - + Divide into strips Розділити на смуги - + Multiplier Множник - + Set multiplier for length of the biggest workpiece in layout. Встановить множник для найбільшої деталі в розкладці. @@ -4968,7 +4968,7 @@ Apply settings anyway? x - + Enabling for sheets that have big height will speed up creating. Увімкнення для листів, що мають велику довжину пришвидшує створення. @@ -4978,7 +4978,7 @@ Apply settings anyway? Принтер: - + None Printer Жодного @@ -5009,7 +5009,7 @@ Apply settings anyway? Ігнорувати поля - + Margins go beyond printing. Apply settings anyway? @@ -5018,63 +5018,78 @@ Apply settings anyway? Усе одно застосувати налаштування? - + Follow grainline Дотримуватися нитки основи - + Time: Час: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. Час, що дається алгоритму, щоб знайти найкращу розкладку. - + Efficiency: Ефективність: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority Ручний пріоритет - + Nest quantity of copies according to piece settings. Розкласти кількість копій відповідно до налаштувань деталей. - + Nest quantity Розкласти кількість - + Auto crop unused width Автоматично обрізати невикористану ширину - + Prefer one sheet solution Віддавати перевагу рішенню з одним аркушем - + min minutes хв - + Enable this option to prefer getting one sheet solutions. Увімкніть цю опцію, щоб надати перевагу отриманню рішень на одному аркуші. @@ -5602,7 +5617,7 @@ Apply settings anyway? Shift measurement column - + Зміщення @@ -6788,7 +6803,7 @@ Apply settings anyway? Check mark - Вибрати позначку + Позначка прапорець @@ -8148,7 +8163,7 @@ Apply settings anyway? Зберегти розкладку - + File name: Назва файлу: @@ -8185,8 +8200,8 @@ Apply settings anyway? Вибрати шлях до теки призначення - - + + File base name Базова назва файлу @@ -8220,37 +8235,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options Недоступно - + Margins Поля - + Right: Праве: - + Left: Ліве: - + Top: Верхнє: - + Bottom: Нижнє: - + Paper format Формат паперу @@ -8260,20 +8280,20 @@ Apply settings anyway? Переглянути… - - - - + + + + cm см - + Templates: Шаблони: - + Orientation: Орієнтація: @@ -8283,17 +8303,17 @@ Apply settings anyway? Параметри - + Scale Масштаб - + Horizontal: По горизонталі: - + Vertical: По вертикалі: @@ -8595,7 +8615,7 @@ Apply settings anyway? Check mark - Вибрати позначку + Позначка прапорець @@ -9694,7 +9714,7 @@ Apply settings anyway? New point: - + Нова точка: @@ -9808,22 +9828,22 @@ Apply settings anyway? Move on top - Перемістити на вершину + Перемістити на вершину Move up - Перемістити вгору + Перемістити вгору Move down - Перемістити вниз + Перемістити вниз Move on bottom - Перемістити до низу + Перемістити до низу @@ -10650,27 +10670,27 @@ Apply settings anyway? Точка - + Point along perpendicular Інструмент точка перпендикуляра - + Perpendicular point along line Перпендикулярна точка вздовж лінії - + Point along bisector Інструмент точка бісектриси кута - + Point at distance and angle Інструмент точка на кінці лінії - + Point at distance along line Інструмент точка вздовж лінії @@ -10683,12 +10703,12 @@ Apply settings anyway? Лінія - + Line between points Лінія між двома точками - + Point at line intersection Точка перетину ліній @@ -10705,7 +10725,7 @@ Apply settings anyway? Інструменти для створення дуг. - + Arc Дуга @@ -10733,210 +10753,215 @@ Apply settings anyway? &Креслення - + Measurements Мірки - + Window Вікно - + Toolbar files Панель інструментів файли - + ToolBar modes Панель інструментів режими - + Toolbar pattern Панель інструметнів лекала - + Toolbar options Панель інструментів налаштування - + Toolbar tools Панель інструментів - + Tool options Параметри інструментів - + Point tools Інструмент Точки - + Tools for creating points Інструмент створення точок - + Selecting tools Інструменти вибору - + Line tools Інструменти Лінії - + Tools for creating segments Інструмент створення сегментів - + Curve tools Інструменти Криві - + Tools for creating curves Інструменти для створення кривих - + Operation tools Операційні інструменти - + Detail tools Інструменти Деталі - + Tools for creating detail Інструменти для створення деталей - + Layout actions Дії розкладки - + New Новий - + &New &Новий - + Create a new pattern Створити нове лекало - + Open Відкрити - + &Open &Відкрити - + Open file with pattern Відкрити файл з лекалами - - + + Save Зберегти - + &Save &Зберегти - + Save pattern Зберегти лекало - + Interactive tools Інтерактивні інструменти - + Ctrl+D Ctrl+D - + Export font corrections Експортувати коригування шрифтів - + Arc start point - + Arc end point + + + Boundary together with notches + + Save &As... Зберегти &як... - + Save not yet saved pattern Зберегти ще незбережене лекало - + Draw Малювання - + Details Деталі - + Pointer tools Інструмент вказівник - + New pattern piece Нове креслення - + Add new pattern piece Додати нове креслення - + Change the label of pattern piece Змінити назву креслення @@ -10949,57 +10974,57 @@ Apply settings anyway? Таблиці змінних - - + + History Історія - + About &Qt Про &Qt - + &About Valentina &Про Valentina - + E&xit Ви&хід - + Exit the application Закрити програму - + Preferences Налаштування - + Pattern properties Властивості лекала - - + + Zoom in Збільшити - + zoom in наблизити - - - + + + Zoom out Зменшити @@ -11016,7 +11041,7 @@ Apply settings anyway? Початковий масштаб - + Zoom fit best Помістити все @@ -11033,7 +11058,7 @@ Apply settings anyway? Повідомити про помилку... - + Report bug Повідомити про помилку @@ -11050,8 +11075,8 @@ Apply settings anyway? Показати довідку - - + + Pattern piece %1 Креслення %1 @@ -11144,7 +11169,7 @@ Apply settings anyway? Вибрати криву - + About Qt Про Qt @@ -11184,7 +11209,7 @@ Apply settings anyway? - + Open file Відкрити файл @@ -11201,7 +11226,7 @@ Apply settings anyway? - + Error empty parameter. Помилка, пустий параметр. @@ -11217,17 +11242,17 @@ Apply settings anyway? Помилка парсингу файлу (std::bad_alloc). - + Bad id. Поганий id. - + File saved Файл збережено - + untitled.val безімений.val @@ -11238,23 +11263,23 @@ Do you want to save your changes? - + &Undo &Скасувати дію - + &Redo &Повторити - + Pattern piece: Креслення: - + Enter a new label for the pattern piece. Введіть нову назву для креслення. @@ -11273,8 +11298,8 @@ Do you want to save your changes? - - + + File error. Помилка файла. @@ -11283,12 +11308,12 @@ Do you want to save your changes? Файл завантажено - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Валентина була закрита неправильно. Хочете знову відкрити ці файли (%1)? - + Reopen files. Відкрити файли знову. @@ -11301,12 +11326,12 @@ Do you want to save your changes? Індивідуальні мірки (*.vit) - + Special point on shoulder Спеціальна точка на плечі - + Triangle tool Інструмент трикутник @@ -11315,42 +11340,42 @@ Do you want to save your changes? Точка на перетині дуги та лінії - + Point from X and Y of two other points Точка на перетині Х і Y коодринат двох інших точок - + Point intersect line and axis Точка на перетині лінії і осі - + Simple curve Проста крива - + Curved path Складна крива - + Segmenting a simple curve Сегментація простої кривої - + Segment a curved path Сегментація складної кривої - + Point intersect curve and axis Точка перениту кривої і вісі - + Segment an arc Сегмент дуги @@ -11363,7 +11388,7 @@ Do you want to save your changes? Інструмент припуску на шви - + Union tool Інструмент об'єднання @@ -11372,12 +11397,12 @@ Do you want to save your changes? Панель інструментів - + Last Tool Останній інструмент - + Activate last used tool again Активувати останній використаний інструмент знову @@ -11387,33 +11412,33 @@ Do you want to save your changes? Виберіть точку по вертикалі - + Mode Режим - + Pointer Вказівник - + Config pattern piece Конфігурація креслення - + Layout Розкладка - + Show Curve Details Показувати криві більш детально - + Show/hide control points and curve direction Показувати/ховати контрольні точки і напрямок кривої @@ -11422,27 +11447,27 @@ Do you want to save your changes? Інструменти - + Point of intersection arcs Точка перетину дуг - + Point of intersection circles Точка перетину кіл - + Point from circle and tangent Точка перетину кола і дотичної - + Point from arc and tangent Точка перетину дуги і дотичної - + Arc with given length Дуга за заданою довжиною @@ -11451,7 +11476,7 @@ Do you want to save your changes? Налаштування - + Layout pages Сторінки розкладки @@ -11472,27 +11497,27 @@ Do you want to save your changes? Розбити і зберегти розкладку на сторінки меншого розміру - + Print Друк - + Print tiled PDF Друк PDF плиткою - + Split and print a layout into smaller pages (for regular printers) Розділити і надрукувати розкладку на сторінках меншого розміру (для звичайних принтерів) - + Print preview Попередній перегляд - + Print preview original layout Попередній перегляд оригінальної розкладки @@ -11501,8 +11526,8 @@ Do you want to save your changes? Експортувати як... - - + + Export original layout Експортувати оригінальну розкладку @@ -11544,7 +11569,7 @@ Do you want to save your changes? - + Layout mode Режим розкладки @@ -11553,7 +11578,7 @@ Do you want to save your changes? Ви не можете використовувати Режим розкладки зараз. Будь ласка, створіть хоча б одну деталь. - + Unsaved changes Незбережені зміни @@ -11592,12 +11617,12 @@ Do you want to save your changes? Стандартні мірки (*.vst);;Індивідуальні мірки (*.vit) - + You can't export empty scene. Ви не можете експортувати порожню сцену. - + Create new Layout Створити нову розкладку @@ -11629,7 +11654,7 @@ Do you want to save your changes? Файл мірок містить недійсні відомі мірки. - + Measurement file has unknown format. Файл мірок має невідомий формат. @@ -11656,13 +11681,13 @@ Do you want to save your changes? Не вдалося синхронізувати мірки. - + Couldn't update measurements. Не вдалося оновити мірки. - - + + The measurements file '%1' could not be found. Не вдалося знайти файл мірок '%1'. @@ -11671,7 +11696,7 @@ Do you want to save your changes? Не вдалося знайти файл мірок <br/><br/> <b>%1</b> <br/><br/>. Хочете оновити розташування файлу - + Loading measurements file Завантаження файлу мірок @@ -11688,9 +11713,9 @@ Do you want to save your changes? Не вдалося встановити розмір. Файл не було відкрито. - - - + + + The method %1 does nothing in GUI mode Метод %1 не працює в графічному режимі @@ -11707,45 +11732,45 @@ Do you want to save your changes? Не вдалося встановити зріст. Файл не було відкрито. - - - - + + + + Export error. Помилка експорту. - + Please, provide one input file. Будь ласка, надайте один вхідний файл. - + Print an original layout Друк оригінальної розкладки - + Preview tiled PDF Попередній перегляд PDF плиткою - + Print preview tiled layout Попередній перегляд розкладки плиткою - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Режим для роботи з кресленнями. Ці креслення база для переходу на наступний етап &quot;Режим деталей&quot;. Перед тим як ви зможете використовувати &quot;Режим деталей&quot; необхідно створити принаймні одну деталь.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Режим роботи з деталями. Перед тим як ви матимете можливість працювати у &quot;Режимі деталей&quot; необхідно створити принаймні одну деталь у &quot;Режимі креслення&quot;. Деталі, створенні на цьому етапі, будуть використанні для створення розкладок.</p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> <html><head/><body><p>Режим для створення розкладок. Цей режим доступний коли створена принаймні одна деталь в &quot;Режимі креслення&quot;. Розкладки можуть бути експортованими в один з вибраних форматів і збережені на диск.</p></body></html> @@ -11768,7 +11793,7 @@ Do you want to save your changes? Не вдалося вивантажити мірки. Деякі з них використовуються у лекалі. - + True darts Виточка @@ -11792,7 +11817,7 @@ Do you want to save your changes? Зберегти... - + Don't Save Не зберігати @@ -11825,7 +11850,7 @@ Do you want to save your changes? Повідомити про помилку... - + Point intersection curves Точка перетину кривих @@ -11843,7 +11868,7 @@ Do you want to save your changes? Мірки були змінені. Бажаєте синхронізувати мірки зараз? - + Curve tool which uses point as control handle Інструмент крива, що використовує точки як контрольні точки @@ -11878,14 +11903,14 @@ Do you want to save your changes? Виберіть один чи більше об'єктів, <b>Enter</b> - завершити створення - + Rotate objects Повертати об'єкти - - - + + + Close pattern Закрити викрійку @@ -11898,12 +11923,12 @@ Do you want to save your changes? Вказівник - + Midpoint between two points Точка середини відстані між двома точками - + Group Група @@ -11924,8 +11949,8 @@ Do you want to save your changes? Ви не можете використовувати Режим розкладки зараз. Будь ласка, створіть хоча б одну деталь. - - + + Original zoom Початковий масштаб @@ -11955,22 +11980,22 @@ Do you want to save your changes? Розмір: - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? Не вдалося знайти файл мірок <br/><br/> <b>%1</b> <br/><br/>. Хочете оновити розташування файлу? - + Flipping objects by line Відзеркалити обєкти по лінії - + Flipping objects by axis Відзеркалити обєкти по вісі - + Move objects Перемістити обєкти @@ -11989,7 +12014,7 @@ Do you want to save your changes? Мірки було синхронізовано - + Elliptical Arc Еліптична дуга @@ -12009,89 +12034,89 @@ Do you want to save your changes? Не вдалося зберегти файл - + read only тільки читання - + Variables Table Таблиця змінних - + Contains information about increments and internal variables Містить інформацію про прибавки та внутрішні змінні - + Load Individual Завантажити індивідуальні - + Load Individual measurements file Завантажити файл індивідуальних мірок - - + + Load Multisize Завантажити стандартні - + Load multisize measurements file Завантажити файл стандартних мірок - + Open Tape Відкрити Tape - + Edit Current Редагувати поточні - + Edit linked to the pattern measurements Редагувати пов'язані з лекалом мірки - + Sync Синхронізувати - + Synchronize linked to the pattern measurements after change Синхронізувати з'єднані з лекалом мірки після зміни - + Unload Current Вивантажити поточні - + Unload measurements if they were not used in a pattern file Вивантажити мірки якщо вони не були використані в лекалі - - + + Individual measurements Індивідуальні мірки - - + + Multisize measurements Стандартні мірки @@ -12102,7 +12127,7 @@ Do you want to save your changes? Файли лекал - + Pin tool Інструмент шпилька @@ -12112,17 +12137,17 @@ Do you want to save your changes? Виберіть точку шпильки - + Insert node tool Інструмент вставка вузла - + Open Tape app for creating or editing measurements file Відкрити програму Tape для створення чи редагування файлу мірок - + Export increments to CSV Експортувати прибавки до CSV @@ -12162,143 +12187,143 @@ Do you want to save your changes? Ви не можете використовувати Режим розкладки зараз. - + Zoom fit best current Найкращий масштаб для поточної - + zoom fit best current pattern piece найкращий масштаб для поточної деталі - + Export details skiping the Layout stage Експортувати деталі, пропускаючи етап розкладки - + You don't have enough details to export. Please, include at least one detail in layout. У вас недостатньо даних для експорту. Будь ласка, додайте принаймні одну деталь у розкладку. - + Export details Експорт деталей - + Can't export details. Не вдається експортувати деталі. - + Label template editor Редактор шаблонів міток - + Workpiece tool Інструмент деталь - + Internal path tool Інструмент внутрішній контур - + Save &As… Зберегти &як… - + Report Bug… Повідомити про помилку… - + Export As… Експортувати як… - + Save… Зберегти… - + Final measurements Остаточні вимірювання - + Export Final Measurements to CSV Експортувати остаточні вимірювання в CSV - + You can't export empty scene. Please, include at least one detail in layout. Ви не можете експортувати порожню сцену. Будь ласка, додайте принаймні одну деталь у розкладку. - + Export final measurements error. Помилка експорту фінальних вимірів. - + Destination path is empty. Шлях призначення порожній. - + Next pattern piece Наступна деталь - + Ctrl+PgDown Ctrl+PgDown - + Previous pattern piece Попередня деталь - + Ctrl+PgUp Ctrl+PgUp - + Tool "Select" Інструмент "Вибрати" - + Layout settings Налаштування розкладки - + Layout export as Експортувати розкладку як - + Place label tool Інструмент мітка місця - + Duplicate detail tool Інструмент дублювання деталей @@ -12308,7 +12333,7 @@ Do you want to save your changes? Виберіть центральну точку мітки місця - + The measurements file '%1' could not be found or provides not enough information. Файл вимірювань «%1» не знайдено або містить недостатньо інформації. @@ -12328,17 +12353,17 @@ Do you want to save your changes? Зміни застосовано. - + Cannot save settings. Access denied. Не вдається зберегти налаштування. Доступ заборонено. - + Ctrl+O Ctrl+O - + Cannot read settings from a malformed .INI file. Неможливо прочитати налаштування з файлу .INI неправильного формату. @@ -12362,27 +12387,27 @@ Do you want to save your changes? Виберіть один чи більше об'єктів, затисніть <b>%1</b> - масового вибору, <b>%2</b> - завершити створення - + Point of intersection circle and segment Точка перетину кола і відрізка - + Increase label font Збільшити шрифт мітки - + Decrease label font Зменшити шрифт мітки - + Original label font Оригінальний шрифт мітки - + Hide labels Сховати мітки @@ -12393,119 +12418,119 @@ Do you want to save your changes? Групи видимості - - + + Export recipe Експортувати рецепт - + Recipe files Файли рецептів - + recipe рецепт - + Could not save recipe. %1 Не вдалося зберегти рецепт. %1 - + Curved path tool which uses point as control handle Інструмент складна крива, що використовує точки як контрольні точки - + Point of intersection arc and axis Точка перетину дуги і осі - + Show main path Покажіть головний контур - + Globally show pieces main path Глобально показати частини головного контуру - - + + Pattern messages Повідомлення лекала - + Clear all messages Очистити всі повідомлення - + Filter Фільтр - + DEBUG НАЛАГОДЖЕННЯ - + WARNING ПОПЕРЕДЖЕННЯ - + CRITICAL КРИТИЧНО - + FATAL ФАТАЛЬНО - + INFO ІНФО - + Auto refresh the list with each parse Автоматичне оновлення списку при кожному аналізі - + Watermark Водяний знак - + Load Завантажити - + Remove Видалити - + Edit current Редагувати поточні - + Editor Редактор - + Create or edit a watermark Створення або редагування водяного знака @@ -12515,37 +12540,37 @@ Do you want to save your changes? Файли з водяними знаками - + Manual Layout Ручна розкладка - + Open Puzzle Відкрити Puzzle - + Open the Puzzle app Відкрийте програму Puzzle - + Create Створити - + Create manual layout Створити ручну розкладку - + Update Оновити - + Update manual layout Оновити ручну розкладку @@ -12571,87 +12596,87 @@ Do you want to save your changes? Вибрати теку - + The pattern has been modified. Do you want to save your changes? Лекало змінено. Хочете зберегти зміни? - + Not supported dimension A value '%1' for this pattern file. Непідтримуване значення виміру A "%1" для цього файлу викрійки. - + Couldn't set dimension A. Need a file with multisize measurements. Не вдалося встановити вимір А. Потрібен файл із багаторозмірними мірками. - + Couldn't set dimension A. File wasn't opened. Не вдалося встановити вимір A. Файл не було відкрито. - + Not supported dimension B value '%1' for this pattern file. Непідтримуване значення виміру B "%1" для цього файлу викрійки. - + Couldn't set dimension B. Need a file with multisize measurements. Не вдалося встановити вимір B. Потрібен файл із багаторозмірними мірками. - + Couldn't set dimension B. File wasn't opened. Не вдалося встановити вимір B. Файл не було відкрито. - + Not supported dimension C value '%1' for this pattern file. Не підтримуване значення виміру C "%1" для цього файлу викрійки. - + Couldn't set dimension C. Need a file with multisize measurements. Не вдалося встановити вимір C. Потрібен файл із багаторозмірними мірками. - + Couldn't set dimension C. File wasn't opened. Не вдалося встановити вимір C. Файл не було відкрито. - + Could not create recipe file. %1 Не вдалося створити файл рецепта. %1 - + Shop Магазин - + Scalable Vector Graphics files Масштабовані файли векторної графіки - + Save draw Зберегти малюнок - + Draw export Експорт малюнку - + Background images Фонові зображення - + Add background image Додати фонове зображення @@ -12736,38 +12761,38 @@ Do you want to save your changes? Виберіть фонове зображення - - + + Unable to save image. Error: %1 Не вдається зберегти зображення. Помилка: %1 - + Unable to save image. No data. Не вдається зберегти зображення. Немає даних. - + untitled без назви - + All files Усі файли - + Save Image Зберегти зображення - + Visibility group Група видимості - + Show accuracy radius Показати радіус точності @@ -12811,7 +12836,7 @@ Do you want to save your changes? Неможливо виконати, тому що не знайдено доступних принтерів у вашій системі. - + unnamed неназваний @@ -12824,7 +12849,7 @@ Do you want to save your changes? Розкладка не була оновлена з часу останніх змін креслення. Хочете продовжити? - + Couldn't prepare data for creation layout Не вдалося підготувати дані для створення розкладки @@ -12865,90 +12890,90 @@ Do you want to save your changes? Не вдалося встановити поля принтера - - + + Can't create a path Не вдається створити шлях - + Preparing details for layout Підготовка деталей для розкладки - + Pattern Лекало - + Name Ім'я - + Value Значення - - - + + + Export final measurements error. Помилка експорту фінальних вимірів. - + Value in line %1 is infinite or NaN. Please, check your calculations. Значення у рядку %1 є нескінченністю або NaN. Будь ласка, перевірте свої обчислення. - + Parser error at line %1: %2. Помилка синтаксичного аналізатора в рядку %1: %2. - + File error %1. Помилка файлу %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Одна або кілька деталей більше, ніж вибраний формат паперу. Виберіть більший формат паперу. - + Description Опис - + Measurement file has unknown format. Файл мірок має невідомий формат. - + File error. Помилка файла. - + Measurement file doesn't include all required measurements. Файл мірок містить не всі необхідні мірки. - + Please, additionally provide: %1 Будь ласка, додатково вкажіть: %1 - + Timeout. Час очікування. - + Process has been stoped because of exception. Процес було зупинено через винятки. @@ -12977,7 +13002,7 @@ Do you want to save your changes? MoveLabel - + move point label перемістити мітку точки @@ -14477,14 +14502,14 @@ This option will take an affect after restart. Зміни застосовано. - + Can't convert toUInt parameter Не можу конвертувати toUInt параметр - + Can't convert toBool parameter Не вдається перетворити параметр toBool @@ -14495,7 +14520,7 @@ This option will take an affect after restart. Отримано порожній параметр - + Can't convert toDouble parameter @@ -14524,22 +14549,22 @@ This option will take an affect after restart. Матеріалу користувача номер %1 не визначено в цій викрійці. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. Неможливо розрахувати надсічку для точки '%1' у деталі '%2'. Припуск на шви порожній. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. Неможливо розрахувати надсічку для точки '%1' у деталі '%2'. Не вдається знайти позицію для надсічки. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. Неможливо розрахувати надсічку для точки '%1' у деталі '%2'. Не вдається виправити позицію надсічки. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. Неможливо розрахувати надсічку для точки '%1' у деталі '%2'. Колапс надсічки. @@ -14549,7 +14574,7 @@ This option will take an affect after restart. Помилка: надсічка для точки '%1' у деталі '%2'. Ширина менша за мінімально допустиму. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. Неможливо розрахувати надсічку для точки '%1' у деталі '%2'. Не вдається знайти перетин. @@ -14593,13 +14618,13 @@ This option will take an affect after restart. Помилка синтаксичного аналізу: %1 - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. Деталь '%1' має неправильний припуск на розкладку. Будь ласка, перевірте припуски на шви, щоб дізнатися, як поводяться припуски на шви. - - + + Piece '%1'. Seam allowance is not valid. Деталь '%1'. Припуск на шви недійсний. @@ -14609,7 +14634,7 @@ This option will take an affect after restart. Знайдено нульову надсічку для точки '%1' у деталі '%2'. Довжина менша за мінімально допустиму. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. Неможливо розрахувати надсічку для точки %1 на деталі %2 із вбудованими припусками на шви. Користувач повинен вручну вказати довжину. @@ -14641,8 +14666,8 @@ This option will take an affect after restart. Неможливо розрахувати довжину надсічки для точки '%1'. Причина: %2. - - + + Passmark '%1' is not part of piece '%2'. Надсічка '%1' не є частиною деталі '%2'. @@ -14664,7 +14689,7 @@ This option will take an affect after restart. Недійсна формула "%1" для інструмента з ідентифікатором "%2". %3. - + Can't convert toInt parameter @@ -14676,47 +14701,47 @@ This option will take an affect after restart. Назва деталі "%1" не унікальна. - + Could not find the segment start. Не вдалося знайти початок сегмента. - + Could not find the segment end. Не вдалося знайти кінець сегмента. - + Segment is too short. Сегмент закороткий. - + Error calculating segment for curve '%1'. %2 Помилка обчислення сегмента для кривої "%1". %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 Помилка в контурі "%1". Не вдалося обчислити сегмент для кривої "%2". %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. Неможливо підготувати вбудовану надсічку "%1" для деталі "%2". Надсічка порожня. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. Неможливо підготувати вбудовану надсічку "%1" для деталі "%2". Базова лінія надсічки порожня. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. Неможливо підготувати надсічку "%1" для деталі "%2". Базова лінія надсічки порожня. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. Неможливо підготувати надсічку "%1" для деталі "%2". Надсічка порожня. @@ -14744,32 +14769,32 @@ This option will take an affect after restart. Не вдалося підготувати заповнювач площі лінії шва. %1. - + No data for the height dimension. Немає даних для виміру зросту. - + No data for the size dimension. Немає даних для виміру розміру. - + No data for the hip dimension. Немає даних для виміру стегон. - + No data for the waist dimension. Немає даних для виміру талії. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 @@ -14778,7 +14803,7 @@ This option will take an affect after restart. %3 - + Piece '%1'. Grainline is not valid. Деталь "%1". Нитка основи недійсна. @@ -14806,23 +14831,22 @@ This option will take an affect after restart. - + Cannot set printer margins Не вдалося встановити поля принтера - Unable to cut curve '%1'. The curve is too short. - Неможливо розрізати криву "%1". Крива закоротка. + Неможливо розрізати криву "%1". Крива закоротка. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Крива "%1". Довжина відрізка замала. Оптимізуйте його до мінімального значення. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Крива "%1". Завелика довжина відрізка. Оптимізуйте його до максимального значення. @@ -14870,25 +14894,25 @@ This option will take an affect after restart. Ви дійсно хочете видалити? - + No data for the X dimension. Немає даних для виміру X. - + No data for the Y dimension. Немає даних для виміру Y. - + No data for the Z dimension. Немає даних для виміру Z. - + No data for the W dimension. Немає даних для виміру W. @@ -14904,13 +14928,13 @@ This option will take an affect after restart. змінити значення глибини деталей - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Крива "%1". Довжина сегмента для вирізання (%2) замала. Оптимізуйте його до мінімального значення. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Крива "%1". Довжина сегмента для вирізання (%2) завелика. Оптимізуйте його до мінімального значення. @@ -15466,7 +15490,7 @@ This option will take an affect after restart. - + 0 results 0 результатів @@ -15517,21 +15541,21 @@ This option will take an affect after restart. - + Name measurement column Назва - + Full name measurement column Повне ім'я - + Group measurement column Група @@ -15753,7 +15777,7 @@ This option will take an affect after restart. - + Import from CSV Імпорт із CSV @@ -15763,244 +15787,244 @@ This option will take an affect after restart. Експортувати до CSV - + Show in Finder Показати в програмі Finder - + File '%1' doesn't exist! Файл '%1' не існує! - + File error. Помилка файла. - + untitled %1 безіменний %1 - - + + untitled без назви - + read only тільки читання - - + + Known measurements - + All files Усі файли - + Could not save the file Не вдалося зберегти файл - + known measurements - + Save as Зберегти як - + Failed to lock. This file already opened in another window. Неможливо заблокувати. Цей файл вже був відкритий в іншому вікні. - + Could not save file Не вдалося зберегти файл - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Неможливо заблокувати. Цей файл вже був відкритий в іншому вікні. Можливі конфлікти, якщо одночасно запущено 2 екземпляри програми. - + Comma-Separated Values Розділені комою значення - + Measurement image - + Invalid image. Error: %1 Недійсне зображення. Помилка: %1 - - + + Unable to save image. Error: %1 Не вдається зберегти зображення. Помилка: %1 - + Save Image Зберегти зображення - + Unable to show image. Error: %1 Неможливо показати зображення. Помилка: %1 - + About Qt Про Qt - + Empty Порожньо - + File was not saved yet. Файл ще не було збережено. - + Unsaved changes Незбереженні зміни - + Measurements have been modified. Do you want to save your changes? Мірки змінені. Хочете зберегти зміни? - + Save… Зберегти… - + Save Зберегти - + Don't Save Не зберігати - + Cannot read settings from a malformed .INI file. Неможливо прочитати налаштування з файлу .INI неправильного формату. - + Cannot save settings. Access denied. Не вдається зберегти налаштування. Доступ заборонено. - + Empty list Порожньо - + Unknown measurement - + &New Window &Нове вікно - - + + Unnamed image %1 - + Open file Відкрити файл - + Length units - + Degrees Градуси - + None Жодного - + Measurement name is empty. Назва мірки порожня. - + Imported file must not contain the same name twice. Імпортований файл не повинен містити однакову назву двічі. - + Measurement '%1' doesn't match regex pattern. Мірка "%1" не відповідає шаблону регулярного виразу. - + Measurement '%1' already used in the file. Мірка "%1" вже використовується у файлі. - + Formula measurement column Формула - + Description measurement column Опис - + Error in row %1. The measurement name is empty. Помилка в рядку %1. Назва мірки порожня. - + Error in row %1. %2 Помилка в рядку %1. %2 - + Individual measurements require at least 2 columns. Для окремих вимірювань потрібно щонайменше 2 стовпці. @@ -16409,7 +16433,7 @@ Do you want to save your changes? - + Pattern unit: Одиниці вимірювання викрійки: @@ -16530,19 +16554,19 @@ Do you want to save your changes? Видалити мірку - + unknown gender невідомий - + male gender чоловік - + female gender жінка @@ -16850,38 +16874,38 @@ Do you want to save your changes? - - + + Name measurement column Ім'я - - + + Full name measurement column Повне ім'я - - + + Calculated value measurement column Розраховане значення - + Formula measurement column Формула - + Base value measurement column Базове значення @@ -17085,40 +17109,40 @@ Do you want to save your changes? Жодного - + Invalid link - + Known measurements %1 - - + + Description measurement column Опис - - - + + + Shift measurement column - + Зміщення - + Empty list Порожньо - - - + + + %1 shift %1 зміщення @@ -17135,22 +17159,22 @@ Do you want to save your changes? Неможливо перетворити значення зсуву на дробове в стовпці %1. - + Millimeters Міліметри - + Inches Дюйми - + Centimeters Сантиметри - + Degrees Градуси @@ -17176,7 +17200,7 @@ Do you want to save your changes? - + 0 results 0 результатів @@ -17741,7 +17765,7 @@ Do you want to save your changes? Check mark notch type - Вибрати позначку + Позначка прапорець @@ -18336,12 +18360,12 @@ Do you want to save your changes? Світла - + None Жодного - + Known measurements %1 @@ -18654,27 +18678,26 @@ Do you want to save your changes? Не вдається розрізати криву - Unable to cut curve '%1'. The curve is too short. - Неможливо розрізати криву "%1". Крива занадто коротка. + Неможливо розрізати криву "%1". Крива занадто коротка. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Крива "%1". Довжина сегмента для вирізання (%2) замала. Оптимізуйте його до мінімального значення. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Крива "%1". Довжина відрізка замала. Оптимізуйте його до мінімального значення. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Крива "%1". Довжина сегмента для вирізання (%2) завелика. Оптимізуйте його до мінімального значення. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Крива "%1". Завелика довжина відрізка. Оптимізуйте його до максимального значення. @@ -19608,26 +19631,26 @@ Do you want to save your changes? VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. Крива "%1". Довжина сегмента для вирізання (%2) замала. Оптимізуйте його до мінімального значення. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. Крива "%1". Довжина відрізка замала. Оптимізуйте його до мінімального значення. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. Крива "%1". Довжина сегмента для вирізання (%2) завелика. Оптимізуйте його до мінімального значення. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. Крива "%1". Завелика довжина відрізка. Оптимізуйте його до максимального значення. @@ -19712,21 +19735,39 @@ Do you want to save your changes? VBank - + Error of preparing data for layout: Detail '%1' square <= 0 Помилка підготовки даних для розкладки: Деталь "%1" площа <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 Помилка підготовки даних для розкладки: Аркуш паперу розкладки <= 0 - + Error of preparing data for layout: List of details is empty Помилка підготовки даних для розкладки: список деталей порожній + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -19738,12 +19779,12 @@ Do you want to save your changes? VCommandLine - + Path to custom measure file (export mode). Розташування файла користувацьких мірок (режим експорту). - + The measure file Файл мірок @@ -19752,7 +19793,7 @@ Do you want to save your changes? Номер вихідного формату (за замовчуванням = 0, режим експорту): - + Format number Номер формату @@ -19761,18 +19802,18 @@ Do you want to save your changes? Номер, відповідаючий шаблону (за замовчуванням = 0, режим експорту): - - + + Template number Номер шаблону - + The page width Ширина аркушу - + The measure unit Одиниця вимірюванния мірок @@ -19785,7 +19826,7 @@ Do you want to save your changes? Кут - + Auto crop unused length (export mode). Автоматично обрізати невикористану довжину (режим експорту). @@ -19802,7 +19843,7 @@ Do you want to save your changes? Одиниці вимірювання розкладки (як для паперу, окрім пікселей, режим експорту). - + The unit Одиниця вимірювання @@ -19819,7 +19860,7 @@ Do you want to save your changes? Ширина проміжку ×2 в одиницях розкладки (режим експорту). - + The gap width Ширина проміжку @@ -19828,7 +19869,7 @@ Do you want to save your changes? Встановлює тип групування розкладки (режим експорту): - + Grouping type Тип групування @@ -19837,7 +19878,7 @@ Do you want to save your changes? Неможливо одночасно використовувати формат сторінки і явно вказаний розмір сторінки. - + Page height, width, units must be used all 3 at once. Повинні бути указані: висота, ширина та одиниці виміру. @@ -19852,7 +19893,7 @@ Do you want to save your changes? - + Unsupported paper units. Непідтримувані одиниці вимірювання для паперу. @@ -19862,8 +19903,8 @@ Do you want to save your changes? Непідтримувані одиниці вимірювання для розкладки. - - + + Export options can be used with single input file only. Параметри експорту можуть використовуватися тільки з одним вхідним файлом. @@ -19872,17 +19913,17 @@ Do you want to save your changes? Запускає програму у тестовому режимі. Програма в цьому режимі завантажує один файл лекала і мовчки завершується, не показуючи головне вікно. Ключ має пріоритет перед ключем '%1'. - + Test option can be used with single input file only. Параметр перевірки може бути використаний тільки для одного вхідного файлу. - + The base filename of exported layout files. Use it to enable console export mode. Базова назва файлів експорту розкладки. Використовуйте для консольного режиму експорту. - + The base filename of layout files Базова назва файлів розкладки @@ -19891,7 +19932,7 @@ Do you want to save your changes? Шлях до теки призначення виводу. - + The destination folder Тека призначення @@ -19912,12 +19953,12 @@ Do you want to save your changes? Значення росту - + Page width in current units like 12.0 (cannot be used with "%1", export mode). Ширина сторінки в поточних одиницях вимірювання, наприклад 12.0 (не може бути використана з "%1", режим експорту). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). Висота сторінки в поточних одиницях вимірювання, наприклад 12.0 (не може бути використана з "%1", режим експорту). @@ -19948,22 +19989,22 @@ Do you want to save your changes? Ігнорувати поля друку (режим експорту). Встановлює всі поля на 0. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Ліве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Праве поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Верхнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Нижнє поле сторінки в поточних одиницях, наприклад, 3.0 (режим експорту). Якщо не встановлено, буде використане значення із принтера за замовчуванням. Або 0, якщо принтери не були виявлені. @@ -19972,32 +20013,32 @@ Do you want to save your changes? Довжина зміщення має бути разом з одиницями виміру зміщення. - + Gap width must be used together with shift units. Ширина зазору повинна бути використана разом з одиницями виміру зсуву. - + Left margin must be used together with page units. Ліве поле повинно бути використано разом з одиницями виміру сторінки. - + Right margin must be used together with page units. Праве поле повинно бути використано разом з одиницями виміру сторінки. - + Top margin must be used together with page units. Верхнє поле повинно бути використано разом з одиницями виміру сторінки. - + Bottom margin must be used together with page units. Нижнє поле повинно бути використано разом з одиницями виміру сторінки. - + The path to output destination folder. By default the directory at which the application was started. Шлях до папки призначення виводу. За замовчуванням, це каталог, в якому була запущена програма. @@ -20030,12 +20071,12 @@ Do you want to save your changes? Обертання в градусах (одне з наперед заданих значень, режим експорту). Значення за замовчуванням 180. 0 - немає повороту. Допустимі значення: %1. Кожне значення показує скільки разів деталь буде повернута. Наприклад, 180 означає поворот два рази (360/180=2) на 180 градусів. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Об'єднувати сторінки (якщо можливо). Максимальне значення обмежене QImage який підтримує тільки максимум 32768x32768 пікселів для зображення. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Зберігає довжину листа якщо встановлено (режим експорту). Опція наказує програмі використовувати максимально ширину листа. Якість розкладки при цьому може погіршитися. @@ -20044,17 +20085,17 @@ Do you want to save your changes? Довжина зміщення розкладки в одиницях виміру розкладки (режим експорту). Опція показує як багато точок уздовж ребра буде створено під час створення розкладки. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. Проміжок розкладки х2, виміряний в одиницях виміру розкладки (режим експорту). Встановлює відстань між деталями й деталлю і краєм листа. - + Sets layout groupping cases (export mode): %1. Встановлює тип групування розкладки (режим експорту): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Запускає програму в тестовому режимі. Програма в цьому режимі завантажує один файл лекала і тихо завершується, не показуючи головне вікно. Ключ має пріоритет перед ключем '%1'. @@ -20071,7 +20112,7 @@ Do you want to save your changes? Довжина зміщення має бути разом з одиницями виміру зміщення. - + Number corresponding to output format (default = 0, export mode): Номер вихідного формату (за замовчуванням = 0, режим експорту): @@ -20081,316 +20122,321 @@ Do you want to save your changes? - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Вимкнути масштабування з високою роздільністю. Викличте цю функцію якщо маєте проблему з масштабуванням (за замовчуванням масштабування увімкнено). Альтернативно ви можете використовувати змінну середовища %1. - + Export dxf in binary form. Експорт dxf у двійковій формі. - + Show/hide grainline when export layout. Показати/сховати нитку основи під час експорту розкладки. - + Export text as paths. Експортувати текст у вигляді контурів. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Експортувати лише деталі. Експортувати деталі, як вони розташовані в режимі деталей. Усі параметри, пов’язані з розкладкою, будуть ігноровані. - + Export only details that match a piece name regex. Експортувати лише ті деталі, які відповідають регулярному виразу назви деталі. - + The name regex Регулярний вираз назви - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. Експортувати в csv із заголовком. За замовчуванням вимкнено. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Укажіть кодек, який буде використовуватися для збереження даних. Список підтримуваних кодеків надається Qt. Значення за замовчуванням залежить від системи. У Windows кодек буде заснований на системній локалі. У системі кодека Unix може повернутися до використаної бібліотеки iconv, якщо не буде знайдено вбудований кодек для даного місця. Допустимі значення для цієї установки: - + Codec name Назва кодека - + Specify csv separator character. Default value is '%1'. Valid characters: Вкажіть символ роздільника csv. Значення за замовчуванням — «%1». Допустимі символи: - + Separator character Символ-роздільник - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Виклик цієї команди дозволяє експортувати фінальні вимірювання. Вкажіть шлях до файлу csv з фінальними вимірюваннями. Шлях повинен містити шлях до каталогу та назву файлу. Він може бути абсолютним або відносним. У випадку відносного шляху буде використовуватися поточний робочий каталог для обчислення шляху призначення. - + Path to csv file Шлях до файлу csv - + Number corresponding to layout page template (default = 0, export mode): Номер, що відповідає шаблону сторінки розкладки (за замовчуванням = 0, режим експорту): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Номер, що відповідає шаблону сторінки pdf плиткою (за замовчуванням = 0, режим експорту pdf плиткою): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Ліве поле сторінки плиткою в поточних одиницях вимірювання, як-от 3.0 (режим експорту). Якщо не встановлено, буде використовуватися значення за замовчуванням 1 см. - - + + The left margin Ліве поле - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. Праве поле сторінки плиткою в поточних одиницях вимірювання, як-от 3.0 (режим експорту). Якщо не встановлено, буде використовуватися значення за замовчуванням 1 см. - - + + The right margin Праве поле - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Верхнє поле сторінки плиткою в поточних одиницях вимірювання, як-от 3.0 (режим експорту). Якщо не встановлено, буде використовуватися значення за замовчуванням 1 см. - - + + The top margin Верхнє поле - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. Нижнє поле сторінки плиткою в поточних одиницях вимірювання, як-от 3.0 (режим експорту). Якщо не встановлено, буде використовуватися значення за замовчуванням 1 см. - - + + The bottom margin Нижнє поле - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Установити орієнтацію сторінки плиткою на альбомну (режим експорту). Значення за замовчуванням, якщо не встановлена портретна. - + Cannot use pageformat and page explicit size together. Не можна використовувати формат сторінки та явний розмір сторінки разом. - + Tiled left margin must be used together with page units. Ліве поле плитки має використовуватися разом з одиницями сторінки. - + Tiled right margin must be used together with page units. Праве поле плитки має використовуватися разом з одиницями сторінки. - + Tiled top margin must be used together with page units. Верхнє поле плитки має використовуватися разом з одиницями сторінки. - + Tiled bottom margin must be used together with page units. Нижнє поле плитки має використовуватися разом з одиницями сторінки. - + Page measure units (export mode). Valid values: %1. Одиниці вимірювання сторінки (режим експорту). Допустимі значення: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. Використовуйте цей параметр, щоб замінити матеріал користувача, визначений у шаблоні. Значення має бути у формі <number>@<user matrial name>. Число має бути в діапазоні від 1 до %1. Наприклад, 1@Тканина2. Ключ можна використовувати кілька разів. Не має ефекту в режимі GUI. - + User material Матеріал користувача - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. Перетворює всі попередження парсингу на помилки. Діє лише у консольному режимі. Використовується для того, щоб змусити Valentina негайно завершити роботу, якщо шаблон містить попередження парсингу. - + Invalid user material '%1'. Separator is missing. Недійсний матеріал користувача "%1". Роздільник відсутній. - + Invalid user material '%1'. Wrong material number. Недійсний матеріал користувача "%1". Неправильний номер матеріалу. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. Змінити орієнтацію шаблону сторінки на альбомну (режим експорту). Цей параметр діє лише для одного із попередньо визначених шаблонів сторінок. - + The page height Висота сторінки - + Order detail to follow grainline direction (export mode). Вказати деталі, щоб вони розміщувалися згідно з напрямком нитки основи (режим експорту). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. <Time> у хвилинах, наданий алгоритму для пошуку найкращої розкладки. Час має бути в діапазоні від 1 хвилини до 60 хвилин. Значення за замовчуванням 1 хвилина. - + Time Час - + Coefficient Коефіцієнт - + Time must be in range from 1 minute to 60 minutes. Час має бути в діапазоні від 1 хвилини до 60 хвилин. - + Follow manual priority over priority by square (export mode). Дотримуватися ручного пріоритету замість пріоритету за площею (режим експорту). - + Nest quantity copies of each piece (export mode). Вкладати кількість копій кожної деталі (режим експорту). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. Встановити ефективність розкладки <coefficient>. Коефіцієнт ефективності розкладки – це відношення площі, яку займають деталі, до описаного прямокутника всіх деталей. Якщо розкладання досягає необхідного рівня, процес зупиняється. Якщо значення дорівнює 0, перевірка не проводиться. Коефіцієнт має бути в діапазоні від 0 до 100. Значення за замовчуванням 0. - + Coefficient must be in range from 0 to 100. Коефіцієнт має бути в діапазоні від 0 до 100. - + Auto crop unused width (export mode). Автоматично обрізати невикористану ширину (режим експорту). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). Установіть коефіцієнт горизонтального масштабування від 0,01 до 3,0 (за замовчуванням = 1,0, режим експорту). - + Horizontal scale Горизонтальний масштаб - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). Установіть коефіцієнт вертикального масштабування від 0,01 до 3,0 (за замовчуванням = 1,0, режим експорту). - + Vertical scale Вертикальний масштаб - + Prefer one sheet layout solution (export mode). Віддавайте перевагу рішенню розкладки з одним аркушем (режим експорту). - + Invalid dimension A value. Недійсне значення виміру A. - + Invalid dimension B value. Недійсне значення виміру B. - + Invalid dimension C value. Недійсне значення виміру C. - + Set base for dimension A in the multisize measurements units (export mode). Встановити базу для виміру А в одиницях вимірювання багаторозмірних мірок (режим експорту). - + The dimension A base База виміру А - + Set base for dimension B in the multisize measurements units (export mode). Встановити базу для виміру B в одиницях вимірювання багаторозмірних мірок (режим експорту). - + The dimension B base База виміру B - + Set base for dimension C in the multisize measurements units (export mode). Встановити базу для виміру B в одиницях вимірювання багаторозмірних мірок (режим експорту). - + The dimension C base База виміру C @@ -20415,47 +20461,47 @@ Do you want to save your changes? Недійсна ширина зазору. - + Invalid layout page left margin. Недійсне ліве поле сторінки розкладки. - + Invalid layout page right margin. Недійсне праве поле сторінки розкладки. - + Invalid layout page top margin. Недійсне верхнє поле сторінки розкладки. - + Invalid layout page bottom margin. Недійсне нижнє поле сторінки розкладки. - + Invalid tiled page left margin. Недійсне ліве поле плиткової сторінки. - + Invalid tiled page right margin. Недійсне праве поле плиткової сторінки. - + Invalid tiled page top margin. Недійсне верхнє поле плиткової сторінки. - + Invalid tiled page bottom margin. Недійсне нижнє поле плиткової сторінки. - + Layout units (as paper's one except px, export mode). Default units cm. Одиниці розкладки (як для паперу, крім px, режим експорту). Одиниці за замовчуванням – см. @@ -20465,7 +20511,7 @@ Do you want to save your changes? Завантажити деталі з файлу необроблених даних розкладки. - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. Ігнорувати поля принтера (режим експорту). Використовуйте, якщо потрібен повний простір канви. У разі подальшого друку ви повинні самі врахувати поля. @@ -20795,7 +20841,7 @@ Do you want to save your changes? VLayoutConverter - + Could not change version. Не давлося змінити версію. @@ -20808,73 +20854,73 @@ Do you want to save your changes? Не вдається зберегти файл "%1". Помилка: %2. - + Cannot set printer page size Не вдається встановити розмір сторінки принтера - + Cannot set printer margins Не вдалося встановити поля принтера - + Can't open file '%1' Не вдається відкрити файл "%1" - + Export raw layout data failed. %1. Не вдалося експортувати сирі дані розкладки. %1. - + Creating file '%1' failed! %2 Не вдалося створити файл '%1'! %2 - + Can't create an AAMA dxf file. Не вдається створити файл AAMA dxf. - + Can't create an ASTM dxf file. Не вдається створити файл ASTM dxf. - - + + Can't create an HP-GL file. Не вдається створити файл HP-GL. - + (flat) files (плоскі) файли - + files файли - + Image files Файли зображень - + tiled плиткою - + Numerical control Числовий контроль - + Raw Layout Data Необроблені дані розкладки @@ -20887,12 +20933,12 @@ Do you want to save your changes? VLayoutPiece - + Piece %1 doesn't have shape. Деталь %1 не має форми. - + Invalid SVG font '%1'. Fallback to outline font. @@ -21116,7 +21162,7 @@ Do you want to save your changes? Check mark - Вибрати позначку + Позначка прапорець @@ -21196,8 +21242,8 @@ Do you want to save your changes? Нерозкладені деталі - - + + Pieces of Деталі @@ -21300,12 +21346,12 @@ Do you want to save your changes? VPGraphicsPiece - + Move to Перемістити до - + Remove from Sheet Видалити з аркуша @@ -21321,37 +21367,37 @@ Do you want to save your changes? VPLayoutFileReader - + Piece Деталь - + Error in line %1. Grainline main line is empty. Помилка в рядку %1. Рядок нитки основи порожній. - + Got empty attribute '%1' Отримано порожній атрибут "%1" - + Error in line %1. Seam allowance is empty. Помилка в рядку %1. Припуск на шви порожній. - + Error in line %1. Internal path shape is empty. Помилка в рядку %1. Внутрішній контур порожній. - + Unexpected tag %1 in line %2 Неочікуваний тег %1 у рядку %2 - + Piece %1 invalid. %2 Деталь %1 недійсна. %2 @@ -21403,7 +21449,7 @@ Do you want to save your changes? - + Properties Властивості @@ -21560,9 +21606,9 @@ Do you want to save your changes? - - - + + + Export Експорт @@ -21612,84 +21658,84 @@ Do you want to save your changes? Попереджати про вихід за межі аркушу - + zoom масштабування - - + + Scale Масштаб - + &Open &Відкрити - + &Save &Зберегти - + Save &As Зберегти &як - + &Import Raw Layout Data &Імпорт необроблених даних розкладки - + E&xit Ви&хід - + &New &Новий - + About &Qt Про &Qt - + About &Puzzle Про &Puzzle - + Zoom in Збільшити - + Zoom out Зменшити - + Zoom 1:1 Масштаб 1:1 - + Zoom fit best Помістити все - + Zoom sheet Масштабувати аркуш - - + + Preferences Властивості @@ -21710,7 +21756,7 @@ Do you want to save your changes? Не вдалося створити розкладку. - + Could not extract data from file '%1'. %2 Не вдалося витягти дані з файлу "%1". %2 @@ -21733,102 +21779,102 @@ Do you want to save your changes? Дюйми - + Scale: Масштаб: - + untitled %1.vlt безіменний %1.vlt - + untitled.vlt безіменний.vlt - + read only тільки читання - + Cannot read settings from a malformed .INI file. Неможливо прочитати налаштування з файлу .INI неправильного формату. - + Cannot save settings. Access denied. Не вдається зберегти налаштування. Доступ заборонено. - - - + + + Failed to open file, is it writable? Не вдалося відкрити файл, чи доступний він для запису? - + &New Window &Нове вікно - + Layout has been modified. Do you want to save your changes? - - + + Layout files Файли розкладки - - - + + + Open file Відкрити файл - + Could not save the file Не вдалося зберегти файл - + layout розкладка - + Save as Зберегти як - + Failed to lock. This file already opened in another window. Неможливо заблокувати. Цей файл вже був відкритий в іншому вікні. - + Could not save file Не вдалося зберегти файл - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Неможливо заблокувати. Цей файл вже був відкритий в іншому вікні. Можливі конфлікти, якщо одночасно запущено 2 екземпляри програми. - + Raw Layout files Необроблені файли розкладки - + About Qt Про Qt @@ -21865,13 +21911,13 @@ Do you want to save your changes? - + Horizontal: По горизонталі: - + Vertical: По вертикалі: @@ -21954,71 +22000,76 @@ Do you want to save your changes? Надрукувати схему плитки - + + Boundary together with notches + + + + Pieces gap: Проміжок між деталями: - + Export Layout Експортувати розкладку - + Undo commands Команди скасування - + Add Sheet Додати аркуш - - + + Print Друк - - + + Print preview Попередній перегляд - - + + Print tiled Друк плиткою - - + + Print preview tiled Попередній перегляд плитки - + Editor Редактор - + Create or edit a watermark Створення або редагування водяного знака - + Edit current Редагувати поточні - + Load Завантажити - + Remove Видалити @@ -22029,13 +22080,13 @@ Do you want to save your changes? - + &Undo &Скасувати дію - + &Redo &Повторити @@ -22046,113 +22097,113 @@ Do you want to save your changes? Пікселі - + Unsaved changes Незбереженні зміни - + Save… Зберегти… - + Save Зберегти - + Don't Save Не зберігати - - + + Can't create a path Не вдається створити шлях - + Can't open file '%1' Не вдається відкрити файл "%1" - - + + Failed in flushing page to disk, disk full? Не вдалося скинути сторінку на диск, чи переповнений диск? - - + + The layout is invalid. Розкладка недійсна. - + The layout is invalid. Piece out of bound. Do you want to continue export? Розкладка недійсна. Деталь поза межами аркуша. Ви хочете продовжити експорт? - + The layout is invalid. Pieces superposition. Do you want to continue export? Розкладка недійсна. Деталі перетинаються. Ви хочете продовжити експорт? - + Sheet %1 Аркуш %1 - + translate pieces перемістити деталі - + rotate pieces обертання деталей - - + + For printing multipages document all sheet should have the same size. Для друку багатосторінкового документа всі сторінки мають бути одного розміру. - - - - - - - - + + + + + + + + Print error Помилка друку - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. Неможливо виконати, тому що не знайдено доступних принтерів у вашій системі. - + Watermark files Файли з водяними знаками - - - - + + + + Unable to get sheet page settings Не вдається отримати налаштування сторінки аркуша @@ -22162,27 +22213,27 @@ Do you want to save your changes? Показати номер плитки - + Z value Значення Z - + Bottom На задній план - + Down На один рівень вниз - + Up На один рівень вверх - + Top На передній план @@ -22192,12 +22243,12 @@ Do you want to save your changes? Впливає тільки на друку в застосунку. Для експорту зі схемою плитки використовуйте окреме налаштування - + sheet аркуш - + Piece %1 invalid. %2 Деталь %1 невірна. %2 @@ -22338,37 +22389,37 @@ Do you want to save your changes? Помилка створення чи оновлення деталі - + Error creating or updating single point Помилка створення чи оновлення простої точки - - + + Error creating or updating point of end line Помилка створення чи оновлення точки кінця відрізку - - + + Error creating or updating point along line Помилка створення чи оновлення точки вздовж лінії - - + + Error creating or updating point of shoulder Помилка створення чи оновлення точки плеча - - + + Error creating or updating point of normal Помилка створення чи оновлення точки нормалі - - + + Error creating or updating point of bisector Помилка створення чи оновлення точки бісектриси @@ -22377,128 +22428,128 @@ Do you want to save your changes? Помилка створення чи оновлення точки перетину ліній - - + + Error creating or updating point of contact Помилка створення чи оновлення точки дотику - + Error creating or updating modeling point Помилка створення чи оновлення модельної точки - + Error creating or updating height Помилка створення чи оновлення висоти - + Error creating or updating triangle Помилка створення чи оновлення трикутника - + Error creating or updating point of intersection Помилка створення чи оновлення точки перетину - - + + Error creating or updating cut spline point Помилка створення чи оновлення точки розрізання кривої - - + + Error creating or updating cut spline path point Помилка створення чи оновлення точки розрізаня складної кривої - - + + Error creating or updating cut arc point Помилка створення чи оновлення точки розрізання дуги - - + + Error creating or updating point of intersection line and axis Помилка створення чи оновлення точки перетину лінії і осі - - + + Error creating or updating point of intersection curve and axis Помилка створення чи оновлення точки перетину кривої і осі - + Error creating or updating line Помилка створення чи оновлення лінії - - + + Error creating or updating simple curve Помилка створення чи оновлення кривої - - + + Error creating or updating curve path Помилка створення чи оновлення шляху кривих - + Error creating or updating modeling simple curve Помилка створення чи оновлення модельної кривої - + Error creating or updating modeling curve path Помилка створення чи оновлення модельного шляху кривих - - - - + + + + Error creating or updating simple arc Помилка створення чи оновлення дуги - + Error creating or updating modeling arc Помилка створення чи оновлення модельної дуги - + Error creating or updating union details Помилка створення чи оновлення об'єднання деталей - + Error creating or updating point of intersection arcs Помилка створення чи оновлення точки перетину дуг - + Error creating or updating point of intersection circles Помилка створення чи оновлення точки перетину кіл - + Error creating or updating point from circle and tangent Помилка створення чи оновлення точки кола та дотичної - + Error creating or updating point from arc and tangent Помилка створення чи оновлення точки дуги та дотичної - + Error creating or updating true darts Помилка створення чи оновлення виточок @@ -22515,17 +22566,17 @@ Do you want to save your changes? Невідомий тип точки '%1'. - + Unknown spline type '%1'. Невідомий тип сплайна '%1'. - + Unknown arc type '%1'. Невідомий тип дуги '%1'. - + Unknown tools type '%1'. Невідомий тип інструмента '%1'. @@ -22535,75 +22586,75 @@ Do you want to save your changes? Помилка, не унікальний id. - + Error creating or updating point of intersection curves Помилка створення чи оновлення точки перетину кривих - + Error creating or updating simple interactive spline Помилка створення чи оновлення кривої - + Error creating or updating interactive spline path Помилка створення чи оновлення складної кривої - + Error creating or updating cubic bezier curve Помилка створення чи оновлення кубічної кривої Безьє - + Error creating or updating cubic bezier path curve Помилка створення чи оновлення складної кубічної кривої Безьє - - + + Error creating or updating operation of rotation Помилка створення чи оновлення повороту - + Unknown operation type '%1'. Невідома операція '%1'. - + Error creating or updating operation of flipping by line Помилка створення чи оновлення операції відзеркалення по лінії - + Error creating or updating operation of flipping by axis Помилка створення чи оновлення операції віддзеркалення за віссю - - + + Error creating or updating operation of moving Помилка створення чи оновлення операції переміщення - + Error creating or updating point of line intersection Помилка створення чи оновлення точки перетину ліній - - + + Error creating or updating simple elliptical arc Помилка створення чи оновлення простої еліптичної дуги - + Unknown elliptical arc type '%1'. Невідомий тип еліптичної дуги '%1'. - + Error creating or updating modeling elliptical arc Помилка створення чи оновлення модельної еліптичної дуги @@ -22613,34 +22664,34 @@ Do you want to save your changes? Деталь - + Unnamed path Контур без назви - - + + Error creating or updating a piece path Помилка створення чи оновлення контуру деталі - + Error creating or updating pin point Помилка створення чи оновлення точки шпильки - + Piece path doesn't contain nodes Контур деталі не містить вузлів - - + + Error creating or updating place label Помилка створення або оновлення мітки місця - + Can't find increment '%1' Не вдалося знайти прибавку '%1' @@ -24420,108 +24471,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance Поточний припуск на шви - + move pattern piece label перемістити мітку деталі - + resize pattern piece label змінити розмір мітки деталі - + rotate pattern piece label повернути мітку деталі - + move pattern info label перемістити мітку деталі - + resize pattern info label змінити розмір мітки деталі - + rotate pattern info label повернути мітку деталі - + move grainline перемістити нитку основи - + resize grainline змінити розмір нитки основи - + rotate grainline обернути нитку основи - + Options Параметри - + In layout В розкладку - + Hide main path Ховати головний контур - + Reset piece label template Скинути шаблон мітки деталі - + Delete Видалити - + apply save detail options застосувати зберегти параметри деталі - + multi deletion групове видалення - + Forbid flipping Заборонити відзеркалення - + Force flipping Примусове перевертання - + This id (%1) is not unique. Цей id (%1) не унікальний. - + Tool was used after deleting. Інструмент був використаний після видалення. diff --git a/share/translations/valentina_zh_CN.ts b/share/translations/valentina_zh_CN.ts index b1dcb0583..43fe24cc3 100644 --- a/share/translations/valentina_zh_CN.ts +++ b/share/translations/valentina_zh_CN.ts @@ -4020,40 +4020,40 @@ - + Three groups: big, middle, small - + Two groups: big, small - + Descending area - - + + Millimiters 毫米 - - + + Centimeters 公分 - - + + Inches 英寸 - + Pixels @@ -4063,22 +4063,22 @@ - + Auto crop unused length - + Unite pages (if possible) - + Gap width: - + Save length of the sheet @@ -4112,12 +4112,12 @@ - + Wrong fields. - + Three groups: big, middle, small = 0; Two groups: big, small = 1; @@ -4125,32 +4125,32 @@ - + Layout options - + Rule for choosing the next workpiece - + Divide into strips - + Multiplier - + Set multiplier for length of the biggest workpiece in layout. - + Enabling for sheets that have big height will speed up creating. @@ -4160,7 +4160,7 @@ - + None Printer @@ -4191,70 +4191,85 @@ - + Margins go beyond printing. Apply settings anyway? - + Follow grainline - + Time: - + + Boundary together with notches + + + + + Debug + + + + + Show layout allowance + + + + Time given for the algorithm to find best layout. - + Efficiency: - + Set layout efficiency coefficient. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. - + Manual priority - + Nest quantity of copies according to piece settings. - + Nest quantity - + Auto crop unused width - + Prefer one sheet solution - + min minutes - + Enable this option to prefer getting one sheet solutions. @@ -6768,7 +6783,7 @@ Apply settings anyway? - + File name: @@ -6793,8 +6808,8 @@ Apply settings anyway? - - + + File base name @@ -6820,37 +6835,42 @@ Apply settings anyway? + Boundary together with notches + + + + Not available options - + Margins - + Right: - + Left: - + Top: - + Bottom: - + Paper format @@ -6860,20 +6880,20 @@ Apply settings anyway? - - - - + + + + cm - + Templates: - + Orientation: @@ -6883,17 +6903,17 @@ Apply settings anyway? - + Scale - + Horizontal: - + Vertical: @@ -8978,27 +8998,27 @@ Apply settings anyway? - + Point along perpendicular - + Perpendicular point along line - + Point along bisector - + Point at distance and angle - + Point at distance along line @@ -9007,17 +9027,17 @@ Apply settings anyway? 线 - + Line between points - + Point at line intersection - + Arc @@ -9037,277 +9057,282 @@ Apply settings anyway? - + Measurements 尺寸 - + Window - + Toolbar files - + ToolBar modes - + Toolbar pattern - + Toolbar options - + Toolbar tools - + Tool options - + Point tools - + Tools for creating points - + Selecting tools - + Line tools - + Tools for creating segments - + Curve tools - + Tools for creating curves - + Operation tools - + Detail tools - + Tools for creating detail - + Layout actions - + New 新 - + &New - + Create a new pattern - + Open - + &Open - + Open file with pattern - - + + Save 保存 - + &Save - + Save pattern - + Save not yet saved pattern - + Draw - + Details - + Pointer tools - + New pattern piece - + Add new pattern piece - + Change the label of pattern piece - + Interactive tools - + Ctrl+D - + Export font corrections - + Arc start point - + Arc end point - - + + Boundary together with notches + + + + + History - + About &Qt - + &About Valentina - + E&xit - + Exit the application - + Preferences - + Pattern properties - - + + Zoom in - + zoom in - - - + + + Zoom out - + Zoom fit best - + Report bug - - + + Pattern piece %1 @@ -9466,12 +9491,12 @@ Apply settings anyway? - + The pattern has been modified. Do you want to save your changes? - + About Qt @@ -9495,7 +9520,7 @@ Apply settings anyway? - + Open file 打开文件 @@ -9512,7 +9537,7 @@ Apply settings anyway? - + Error empty parameter. @@ -9528,39 +9553,39 @@ Apply settings anyway? - + Bad id. - + File saved - + untitled.val - + &Undo - + &Redo - + Pattern piece: - + Enter a new label for the pattern piece. @@ -9571,83 +9596,83 @@ Apply settings anyway? - - + + File error. - + Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? - + Reopen files. - + Special point on shoulder - + Triangle tool - + Point from X and Y of two other points - + Point intersect line and axis - + Simple curve - + Curved path - + Segmenting a simple curve - + Segment a curved path - + Point intersect curve and axis - + Segment an arc - + Union tool - + Last Tool - + Activate last used tool again @@ -9657,109 +9682,109 @@ Apply settings anyway? - + Mode - + Pointer - + Config pattern piece - + Layout - + Show Curve Details - + Show/hide control points and curve direction - + Tool "Select" - + Layout settings - + Layout export as - + Point of intersection arcs - + Point of intersection circles - + Point from circle and tangent - + Point from arc and tangent - + Arc with given length - + Layout pages - + Print - + Print tiled PDF - + Split and print a layout into smaller pages (for regular printers) - + Print preview - + Print preview original layout - - + + Export original layout @@ -9789,12 +9814,12 @@ Apply settings anyway? - + Layout mode - + Unsaved changes @@ -9805,12 +9830,12 @@ Apply settings anyway? - + You can't export empty scene. - + Create new Layout @@ -9825,7 +9850,7 @@ Apply settings anyway? - + Measurement file has unknown format. @@ -9840,68 +9865,68 @@ Apply settings anyway? - + Couldn't update measurements. - - + + The measurements file '%1' could not be found. - + Loading measurements file - - - + + + The method %1 does nothing in GUI mode - - - - + + + + Export error. - + Please, provide one input file. - + Print an original layout - + Preview tiled PDF - + Print preview tiled layout - + <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> - + <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> - + <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> @@ -9916,7 +9941,7 @@ Apply settings anyway? - + True darts @@ -9940,12 +9965,12 @@ Apply settings anyway? 保存... - + Don't Save 不保存 - + Point intersection curves @@ -9955,7 +9980,7 @@ Apply settings anyway? - + Curve tool which uses point as control handle @@ -9970,24 +9995,24 @@ Apply settings anyway? - + Rotate objects - - - + + + Close pattern - + Midpoint between two points - + Group @@ -10004,8 +10029,8 @@ Apply settings anyway? - - + + Original zoom @@ -10027,22 +10052,22 @@ Apply settings anyway? - + The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? - + Flipping objects by line - + Flipping objects by axis - + Move objects @@ -10057,7 +10082,7 @@ Apply settings anyway? - + Elliptical Arc @@ -10077,89 +10102,89 @@ Apply settings anyway? - + read only - + Variables Table - + Contains information about increments and internal variables - + Load Individual - + Load Individual measurements file - - + + Load Multisize - + Load multisize measurements file - + Open Tape - + Edit Current - + Edit linked to the pattern measurements - + Sync - + Synchronize linked to the pattern measurements after change - + Unload Current - + Unload measurements if they were not used in a pattern file - - + + Individual measurements - - + + Multisize measurements @@ -10170,7 +10195,7 @@ Apply settings anyway? - + Pin tool @@ -10180,17 +10205,17 @@ Apply settings anyway? - + Insert node tool - + Open Tape app for creating or editing measurements file - + Export increments to CSV @@ -10230,128 +10255,128 @@ Apply settings anyway? - + Zoom fit best current - + zoom fit best current pattern piece - + Export details skiping the Layout stage - + You don't have enough details to export. Please, include at least one detail in layout. - + Export details - + Can't export details. - + Label template editor - + Workpiece tool - + Internal path tool - + Save &As… - + Report Bug… - + Export As… - + Save… - + Final measurements - + Export Final Measurements to CSV - + You can't export empty scene. Please, include at least one detail in layout. - + Export final measurements error. - + Destination path is empty. - + Next pattern piece - + Ctrl+PgDown - + Previous pattern piece - + Ctrl+PgUp - + Place label tool - + Duplicate detail tool @@ -10361,7 +10386,7 @@ Apply settings anyway? - + The measurements file '%1' could not be found or provides not enough information. @@ -10381,17 +10406,17 @@ Apply settings anyway? - + Cannot save settings. Access denied. - + Ctrl+O - + Cannot read settings from a malformed .INI file. @@ -10415,27 +10440,27 @@ Apply settings anyway? - + Point of intersection circle and segment - + Increase label font - + Decrease label font - + Original label font - + Hide labels @@ -10446,119 +10471,119 @@ Apply settings anyway? - - + + Export recipe - + Recipe files - + recipe - + Could not save recipe. %1 - + Curved path tool which uses point as control handle - + Point of intersection arc and axis - + Show main path - + Globally show pieces main path - - + + Pattern messages - + Clear all messages - + Filter - + DEBUG - + WARNING - + CRITICAL - + FATAL - + INFO - + Auto refresh the list with each parse - + Watermark - + Load - + Remove - + Edit current - + Editor - + Create or edit a watermark @@ -10568,37 +10593,37 @@ Apply settings anyway? - + Manual Layout - + Open Puzzle - + Open the Puzzle app - + Create - + Create manual layout - + Update - + Update manual layout @@ -10619,82 +10644,82 @@ Apply settings anyway? - + Not supported dimension A value '%1' for this pattern file. - + Couldn't set dimension A. Need a file with multisize measurements. - + Couldn't set dimension A. File wasn't opened. - + Not supported dimension B value '%1' for this pattern file. - + Couldn't set dimension B. Need a file with multisize measurements. - + Couldn't set dimension B. File wasn't opened. - + Not supported dimension C value '%1' for this pattern file. - + Couldn't set dimension C. Need a file with multisize measurements. - + Couldn't set dimension C. File wasn't opened. - + Could not create recipe file. %1 - + Draw export - + Shop - + Scalable Vector Graphics files - + Save draw - + Background images - + Add background image @@ -10714,38 +10739,38 @@ Apply settings anyway? - - + + Unable to save image. Error: %1 - + Unable to save image. No data. - + untitled - + All files - + Save Image - + Visibility group - + Show accuracy radius @@ -10753,100 +10778,100 @@ Apply settings anyway? MainWindowsNoGUI - + unnamed - + Couldn't prepare data for creation layout - - + + Can't create a path - + Preparing details for layout - + Pattern 样板 - + Name - + Value - - - + + + Export final measurements error. - + Value in line %1 is infinite or NaN. Please, check your calculations. - + Parser error at line %1: %2. - + File error %1. - + One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. - + Description - + Measurement file has unknown format. - + File error. - + Measurement file doesn't include all required measurements. - + Please, additionally provide: %1 - + Timeout. - + Process has been stoped because of exception. @@ -10875,7 +10900,7 @@ Apply settings anyway? MoveLabel - + move point label @@ -12222,14 +12247,14 @@ This option will take an affect after restart. - + Can't convert toUInt parameter - + Can't convert toBool parameter @@ -12240,7 +12265,7 @@ This option will take an affect after restart. - + Can't convert toDouble parameter @@ -12269,22 +12294,22 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Seam allowance is empty. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find position for a notch. - + Cannot calculate a notch for point '%1' in piece '%2'. Unable to fix a notch position. - + Cannot calculate a notch for point '%1' in piece '%2'. Notch collapse. @@ -12294,7 +12319,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2'. Cannot find intersection. @@ -12338,13 +12363,13 @@ This option will take an affect after restart. - + Piece '%1' has invalid layout allowance. Please, check seam allowance to check how seam allowance behave. - - + + Piece '%1'. Seam allowance is not valid. @@ -12354,7 +12379,7 @@ This option will take an affect after restart. - + Cannot calculate a notch for point '%1' in piece '%2' with built in seam allowance. User must manually provide length. @@ -12386,8 +12411,8 @@ This option will take an affect after restart. - - + + Passmark '%1' is not part of piece '%2'. @@ -12409,7 +12434,7 @@ This option will take an affect after restart. - + Can't convert toInt parameter @@ -12421,47 +12446,47 @@ This option will take an affect after restart. - + Could not find the segment start. - + Could not find the segment end. - + Segment is too short. - + Error calculating segment for curve '%1'. %2 - + Error in path '%1'. Calculating segment for curve '%2' has failed. %3 - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark is empty. - + Cannot prepare builtin passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark base line is empty. - + Cannot prepare passmark '%1' for piece '%2'. Passmark is empty. @@ -12489,39 +12514,39 @@ This option will take an affect after restart. - + No data for the height dimension. - + No data for the size dimension. - + No data for the hip dimension. - + No data for the waist dimension. - - + + Piece '%1'. Unable to load default piece label template. %2 %3 - + Piece '%1'. Grainline is not valid. @@ -12549,23 +12574,18 @@ This option will take an affect after restart. - + Cannot set printer margins - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -12613,25 +12633,25 @@ This option will take an affect after restart. - + No data for the X dimension. - + No data for the Y dimension. - + No data for the Z dimension. - + No data for the W dimension. @@ -12647,13 +12667,13 @@ This option will take an affect after restart. - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. @@ -13180,7 +13200,7 @@ This option will take an affect after restart. - + 0 results @@ -13231,21 +13251,21 @@ This option will take an affect after restart. - + Name measurement column - + Full name measurement column - + Group measurement column @@ -13457,7 +13477,7 @@ This option will take an affect after restart. - + Import from CSV @@ -13477,244 +13497,244 @@ This option will take an affect after restart. - + Show in Finder - + File '%1' doesn't exist! - + File error. - + untitled %1 - - + + untitled - + read only - - + + Known measurements - + All files - + Could not save the file - + known measurements - + Save as - + Failed to lock. This file already opened in another window. - + Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Comma-Separated Values - + Measurement image - + Invalid image. Error: %1 - - + + Unable to save image. Error: %1 - + Save Image - + Unable to show image. Error: %1 - + About Qt - + Empty - + File was not saved yet. - + Unsaved changes - + Measurements have been modified. Do you want to save your changes? - + Save… - + Save 保存 - + Don't Save 不保存 - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - + Empty list - + Unknown measurement - + &New Window - - + + Unnamed image %1 - + Open file 打开文件 - + Length units - + Degrees - + None - + Measurement name is empty. - + Imported file must not contain the same name twice. - + Measurement '%1' doesn't match regex pattern. - + Measurement '%1' already used in the file. - + Formula measurement column - + Description measurement column - + Error in row %1. The measurement name is empty. - + Error in row %1. %2 - + Individual measurements require at least 2 columns. @@ -13995,7 +14015,7 @@ This option will take an affect after restart. - + Pattern unit: @@ -14060,19 +14080,19 @@ This option will take an affect after restart. - + unknown gender - + male gender - + female gender @@ -14304,38 +14324,38 @@ This option will take an affect after restart. - - + + Name measurement column - - + + Full name measurement column - - + + Calculated value measurement column - + Formula measurement column - + Base value measurement column @@ -14539,40 +14559,40 @@ This option will take an affect after restart. - + Invalid link - + Known measurements %1 - - + + Description measurement column - - - + + + Shift measurement column - + Empty list - - - + + + %1 shift @@ -14589,22 +14609,22 @@ This option will take an affect after restart. - + Millimeters - + Inches 英寸 - + Centimeters 公分 - + Degrees @@ -14636,7 +14656,7 @@ This option will take an affect after restart. - + 0 results @@ -15740,12 +15760,12 @@ This option will take an affect after restart. - + None - + Known measurements %1 @@ -16018,27 +16038,22 @@ This option will take an affect after restart. - - Unable to cut curve '%1'. The curve is too short. - - - - + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -16960,26 +16975,26 @@ This option will take an affect after restart. VArc - - + + Curve '%1'. Length of a cut segment (%2) is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment is too small. Optimize it to minimal value. - - + + Curve '%1'. Length of a cut segment (%2) is too big. Optimize it to maximal value. - - + + Curve '%1'. Length of a cut segment is too big. Optimize it to maximal value. @@ -17064,21 +17079,39 @@ This option will take an affect after restart. VBank - + Error of preparing data for layout: Detail '%1' square <= 0 - + Error of preparing data for layout: Layout paper sheet <= 0 - + Error of preparing data for layout: List of details is empty + + VBoundary + + + Piece '%1'. + + + + + Unable to insert notch for point '%1'. + + + + + Unable to insert notch. + + + VComboBoxDelegate @@ -17090,58 +17123,58 @@ This option will take an affect after restart. VCommandLine - + Path to custom measure file (export mode). - + The measure file - + Format number - - + + Template number - + The page width - + The measure unit - + Auto crop unused length (export mode). - + The unit - + The gap width - + Grouping type - + Page height, width, units must be used all 3 at once. @@ -17152,7 +17185,7 @@ This option will take an affect after restart. - + Unsupported paper units. @@ -17162,38 +17195,38 @@ This option will take an affect after restart. - - + + Export options can be used with single input file only. - + Test option can be used with single input file only. - + The base filename of exported layout files. Use it to enable console export mode. - + The base filename of layout files - + The destination folder - + Page width in current units like 12.0 (cannot be used with "%1", export mode). - + Page height in current units like 12.0 (cannot be used with "%1", export mode). @@ -17208,397 +17241,402 @@ This option will take an affect after restart. - + Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. - + Gap width must be used together with shift units. - + Left margin must be used together with page units. - + Right margin must be used together with page units. - + Top margin must be used together with page units. - + Bottom margin must be used together with page units. - + The path to output destination folder. By default the directory at which the application was started. - + Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. - + Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. - + The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. - + Sets layout groupping cases (export mode): %1. - + Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. - + Number corresponding to output format (default = 0, export mode): - + Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. - + Export dxf in binary form. - + Show/hide grainline when export layout. - + Export text as paths. - + Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. - + Export only details that match a piece name regex. - + The name regex - + + Export boundary together with notches (export mode). + + + + Export to csv with header. By default disabled. - + Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: - + Codec name - + Specify csv separator character. Default value is '%1'. Valid characters: - + Separator character - + Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. - + Path to csv file - + Number corresponding to layout page template (default = 0, export mode): - + Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): - + Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The left margin - + Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. - - + + The right margin - + Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The top margin - + Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. - - + + The bottom margin - + Set tiled page orienatation to landscape (export mode). Default value if not set portrait. - + Cannot use pageformat and page explicit size together. - + Tiled left margin must be used together with page units. - + Tiled right margin must be used together with page units. - + Tiled top margin must be used together with page units. - + Tiled bottom margin must be used together with page units. - + Page measure units (export mode). Valid values: %1. - + Use this option to override user material defined in pattern. The value must be in form <number>@<user matrial name>. The number should be in range from 1 to %1. For example, 1@Fabric2. The key can be used multiple times. Has no effect in GUI mode. - + User material - + Make all parsing warnings into errors. Have effect only in console mode. Use to force Valentina to immediately terminate if a pattern contains a parsing warning. - + Invalid user material '%1'. Separator is missing. - + Invalid user material '%1'. Wrong material number. - + Switch page template orientation to landscape (export mode). This option has effect only for one of predefined page templates. - + The page height - + Order detail to follow grainline direction (export mode). - + <Time> in minutes given for the algorithm to find best layout. Time must be in range from 1 minute to 60 minutes. Default value 1 minute. - + Time - + Coefficient - + Time must be in range from 1 minute to 60 minutes. - + Follow manual priority over priority by square (export mode). - + Nest quantity copies of each piece (export mode). - + Set layout efficiency <coefficient>. Layout efficiency coefficient is the ratio of the area occupied by the pieces to the bounding rect of all pieces. If nesting reaches required level the process stops. If value is 0 no check will be made. Coefficient must be in range from 0 to 100. Default value 0. - + Coefficient must be in range from 0 to 100. - + Auto crop unused width (export mode). - + Set horizontal scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Horizontal scale - + Set vertical scale factor from 0.01 to 3.0 (default = 1.0, export mode). - + Vertical scale - + Prefer one sheet layout solution (export mode). - + Invalid dimension A value. - + Invalid dimension B value. - + Invalid dimension C value. - + Set base for dimension A in the multisize measurements units (export mode). - + The dimension A base - + Set base for dimension B in the multisize measurements units (export mode). - + The dimension B base - + Set base for dimension C in the multisize measurements units (export mode). - + The dimension C base @@ -17623,47 +17661,47 @@ This option will take an affect after restart. - + Invalid layout page left margin. - + Invalid layout page right margin. - + Invalid layout page top margin. - + Invalid layout page bottom margin. - + Invalid tiled page left margin. - + Invalid tiled page right margin. - + Invalid tiled page top margin. - + Invalid tiled page bottom margin. - + Layout units (as paper's one except px, export mode). Default units cm. @@ -17673,7 +17711,7 @@ This option will take an affect after restart. - + Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins themselves. @@ -17944,7 +17982,7 @@ This option will take an affect after restart. VLayoutConverter - + Could not change version. @@ -17957,73 +17995,73 @@ This option will take an affect after restart. - + Cannot set printer page size - + Cannot set printer margins - + Can't open file '%1' - + Export raw layout data failed. %1. - + Creating file '%1' failed! %2 - + Can't create an AAMA dxf file. - + Can't create an ASTM dxf file. - - + + Can't create an HP-GL file. - + (flat) files - + files - + Image files - + tiled - + Numerical control - + Raw Layout Data @@ -18036,12 +18074,12 @@ This option will take an affect after restart. VLayoutPiece - + Piece %1 doesn't have shape. - + Invalid SVG font '%1'. Fallback to outline font. @@ -18345,8 +18383,8 @@ This option will take an affect after restart. - - + + Pieces of @@ -18438,12 +18476,12 @@ This option will take an affect after restart. VPGraphicsPiece - + Move to - + Remove from Sheet @@ -18459,37 +18497,37 @@ This option will take an affect after restart. VPLayoutFileReader - + Piece - + Error in line %1. Grainline main line is empty. - + Got empty attribute '%1' - + Error in line %1. Seam allowance is empty. - + Error in line %1. Internal path shape is empty. - + Unexpected tag %1 in line %2 - + Piece %1 invalid. %2 @@ -18541,7 +18579,7 @@ This option will take an affect after restart. - + Properties @@ -18706,9 +18744,9 @@ This option will take an affect after restart. - - - + + + Export @@ -18758,84 +18796,84 @@ This option will take an affect after restart. - + zoom - - + + Scale - + &Open - + &Save - + Save &As - + &Import Raw Layout Data - + E&xit - + &New - + About &Qt - + About &Puzzle - + Zoom in - + Zoom out - + Zoom 1:1 - + Zoom fit best - + Zoom sheet - - + + Preferences @@ -18856,7 +18894,7 @@ This option will take an affect after restart. - + Could not extract data from file '%1'. %2 @@ -18879,102 +18917,102 @@ This option will take an affect after restart. 英寸 - + Scale: - + untitled %1.vlt - + untitled.vlt - + read only - + Cannot read settings from a malformed .INI file. - + Cannot save settings. Access denied. - - - + + + Failed to open file, is it writable? - + &New Window - + Layout has been modified. Do you want to save your changes? - - + + Layout files - - - + + + Open file 打开文件 - + Could not save the file - + layout - + Save as - + Failed to lock. This file already opened in another window. - + Could not save file - + Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. - + Raw Layout files - + About Qt @@ -19011,13 +19049,13 @@ This option will take an affect after restart. - + Horizontal: - + Vertical: @@ -19100,71 +19138,76 @@ This option will take an affect after restart. - + + Boundary together with notches + + + + Pieces gap: - + Export Layout - + Undo commands - + Add Sheet - - + + Print - - + + Print preview - - + + Print tiled - - + + Print preview tiled - + Editor - + Create or edit a watermark - + Edit current - + Load - + Remove @@ -19175,13 +19218,13 @@ This option will take an affect after restart. - + &Undo - + &Redo @@ -19192,113 +19235,113 @@ This option will take an affect after restart. - + Unsaved changes - + Save… - + Save 保存 - + Don't Save 不保存 - - + + Can't create a path - + Can't open file '%1' - - + + Failed in flushing page to disk, disk full? - - + + The layout is invalid. - + The layout is invalid. Piece out of bound. Do you want to continue export? - + The layout is invalid. Pieces superposition. Do you want to continue export? - + Sheet %1 - + translate pieces - + rotate pieces - - + + For printing multipages document all sheet should have the same size. - - - - - - - - + + + + + + + + Print error - - - - - - - - + + + + + + + + Cannot proceed because there are no available printers in your system. - + Watermark files - - - - + + + + Unable to get sheet page settings @@ -19308,27 +19351,27 @@ This option will take an affect after restart. - + Z value - + Bottom - + Down - + Up - + Top @@ -19338,12 +19381,12 @@ This option will take an affect after restart. - + sheet - + Piece %1 invalid. %2 @@ -19487,163 +19530,163 @@ This option will take an affect after restart. - + Error creating or updating single point - - + + Error creating or updating point of end line - - + + Error creating or updating point along line - - + + Error creating or updating point of shoulder - - + + Error creating or updating point of normal - - + + Error creating or updating point of bisector - - + + Error creating or updating point of contact - + Error creating or updating modeling point - + Error creating or updating height - + Error creating or updating triangle - + Error creating or updating point of intersection - - + + Error creating or updating cut spline point - - + + Error creating or updating cut spline path point - - + + Error creating or updating cut arc point - - + + Error creating or updating point of intersection line and axis - - + + Error creating or updating point of intersection curve and axis - + Error creating or updating line - - + + Error creating or updating simple curve - - + + Error creating or updating curve path - + Error creating or updating modeling simple curve - + Error creating or updating modeling curve path - - - - + + + + Error creating or updating simple arc - + Error creating or updating modeling arc - + Error creating or updating union details - + Error creating or updating point of intersection arcs - + Error creating or updating point of intersection circles - + Error creating or updating point from circle and tangent - + Error creating or updating point from arc and tangent - + Error creating or updating true darts @@ -19660,17 +19703,17 @@ This option will take an affect after restart. - + Unknown spline type '%1'. - + Unknown arc type '%1'. - + Unknown tools type '%1'. @@ -19680,75 +19723,75 @@ This option will take an affect after restart. - + Error creating or updating point of intersection curves - + Error creating or updating simple interactive spline - + Error creating or updating interactive spline path - + Error creating or updating cubic bezier curve - + Error creating or updating cubic bezier path curve - - + + Error creating or updating operation of rotation - + Unknown operation type '%1'. - + Error creating or updating operation of flipping by line - + Error creating or updating operation of flipping by axis - - + + Error creating or updating operation of moving - + Error creating or updating point of line intersection - - + + Error creating or updating simple elliptical arc - + Unknown elliptical arc type '%1'. - + Error creating or updating modeling elliptical arc @@ -19758,34 +19801,34 @@ This option will take an affect after restart. - + Unnamed path - - + + Error creating or updating a piece path - + Error creating or updating pin point - + Piece path doesn't contain nodes - - + + Error creating or updating place label - + Can't find increment '%1' @@ -21377,108 +21420,108 @@ Raw layout format compatibility error: actualFileVersion = %1 and fileVersion = VToolSeamAllowance - - + + Current seam allowance - + move pattern piece label - + resize pattern piece label - + rotate pattern piece label - + move pattern info label - + resize pattern info label - + rotate pattern info label - + move grainline - + resize grainline - + rotate grainline - + Options - + In layout - + Hide main path - + Reset piece label template - + Delete 删除 - + apply save detail options - + multi deletion - + Forbid flipping - + Force flipping - + This id (%1) is not unique. - + Tool was used after deleting.