diff --git a/share/translations/valentina.ts b/share/translations/valentina.ts index e252f68f4..9875d20a5 100644 --- a/share/translations/valentina.ts +++ b/share/translations/valentina.ts @@ -4929,7 +4929,7 @@ Apply settings anyway? DialogSeamAllowance Seam allowance tool - Seam allowance tool + Seam allowance tool All objects in path should follow in clockwise direction. @@ -5235,6 +5235,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6688,7 +6692,7 @@ Do you want to save your changes? Seam allowance tool - Seam allowance tool + Seam allowance tool Union tool @@ -7231,10 +7235,6 @@ Do you want to save your changes? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -7439,6 +7439,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -9742,6 +9750,13 @@ Do you want to save your changes? Detail + + VAbstractSpline + + Length + Length + + VAbstractTool @@ -10729,6 +10744,107 @@ Do you want to save your changes? on fold + + VToolAlongLine + + Length + Length + + + Angle + Angle + + + + VToolArc + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Length + + + + VToolCutArc + + Arc + Arc + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Curve + + + length + + + + + VToolCutSplinePath + + Curve + Curve + + + length + + + VToolDetail @@ -10780,6 +10896,69 @@ Do you want to save your changes? rotate grainline + + VToolEllipticalArc + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Length + + + Angle + Angle + + + + VToolLine + + Length + Length + + + Angle + Angle + + + + VToolLineIntersectAxis + + Length + Length + + + Angle + Angle + + + + VToolLinePoint + + Length + Length + + + Angle + Angle + + VToolOptionsPropertyBrowser @@ -11307,6 +11486,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + Length + + + Angle + Angle + + VToolSeamAllowance @@ -11362,6 +11552,17 @@ Do you want to save your changes? Delete + + VToolShoulderPoint + + Length + Length + + + Angle + Angle + + VToolUnionDetails diff --git a/share/translations/valentina_cs_CZ.ts b/share/translations/valentina_cs_CZ.ts index fbc41d88e..6814c2278 100644 --- a/share/translations/valentina_cs_CZ.ts +++ b/share/translations/valentina_cs_CZ.ts @@ -4345,10 +4345,6 @@ Apply settings anyway? DialogSeamAllowance - - Seam allowance tool - Nástroj pro stanovení přídavku na švy - Ready! @@ -4505,6 +4501,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -5898,7 +5898,7 @@ Chcete uložit své změny? Seam allowance tool - Nástroj pro stanovení přídavku na švy + Nástroj pro stanovení přídavku na švy Union tool @@ -6308,10 +6308,6 @@ Chcete uložit své změny? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -6516,6 +6512,14 @@ Chcete uložit své změny? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -8488,6 +8492,13 @@ Do you want to save your changes? Detail + + VAbstractSpline + + Length + Délka + + VAbstractTool @@ -9360,6 +9371,107 @@ Do you want to save your changes? Nelze vyjmout cestu křivky s jedním bodem + + VToolAlongLine + + Length + Délka + + + Angle + Úhel + + + + VToolArc + + Length + Délka + + + Radius + Poloměr + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Délka + + + Radius + Poloměr + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Délka + + + + VToolCutArc + + Arc + Oblouk + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Křivka + + + length + + + + + VToolCutSplinePath + + Curve + Křivka + + + length + + + VToolDetail @@ -9371,6 +9483,69 @@ Do you want to save your changes? Smazat + + VToolEllipticalArc + + Length + Délka + + + Radius + Poloměr + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Délka + + + Angle + Úhel + + + + VToolLine + + Length + Délka + + + Angle + Úhel + + + + VToolLineIntersectAxis + + Length + Délka + + + Angle + Úhel + + + + VToolLinePoint + + Length + Délka + + + Angle + Úhel + + VToolOptionsPropertyBrowser @@ -9838,6 +10013,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + Délka + + + Angle + Úhel + + VToolSeamAllowance @@ -9893,6 +10079,17 @@ Do you want to save your changes? Smazat + + VToolShoulderPoint + + Length + Délka + + + Angle + Úhel + + VToolUnionDetails diff --git a/share/translations/valentina_de_DE.ts b/share/translations/valentina_de_DE.ts index 522e2da6c..46af28d6a 100644 --- a/share/translations/valentina_de_DE.ts +++ b/share/translations/valentina_de_DE.ts @@ -4822,10 +4822,6 @@ Einstellungen trotzdem anwenden? DialogSeamAllowance - - Seam allowance tool - Tool für die Nahtzugabe - Ready! Fertig! @@ -4982,6 +4978,10 @@ Einstellungen trotzdem anwenden? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6435,7 +6435,7 @@ Sollen die Änderungen gespeichert werden? Seam allowance tool - Tool für die Nahtzugabe + Tool für die Nahtzugabe Union tool @@ -6974,10 +6974,6 @@ Sollen die Änderungen gespeichert werden? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -7182,6 +7178,14 @@ Sollen die Änderungen gespeichert werden? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -9355,6 +9359,13 @@ Do you want to save your changes? Detail + + VAbstractSpline + + Length + Länge + + VAbstractTool @@ -10310,6 +10321,107 @@ Do you want to save your changes? Splinepfad mit nur einem Punkt kann nicht zerschnitten werden + + VToolAlongLine + + Length + Länge + + + Angle + Winkel + + + + VToolArc + + Length + Länge + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Länge + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Länge + + + + VToolCutArc + + Arc + Bogen + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Kurve + + + length + + + + + VToolCutSplinePath + + Curve + Kurve + + + length + + + VToolDetail @@ -10321,6 +10433,69 @@ Do you want to save your changes? Löschen + + VToolEllipticalArc + + Length + Länge + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Länge + + + Angle + Winkel + + + + VToolLine + + Length + Länge + + + Angle + Winkel + + + + VToolLineIntersectAxis + + Length + Länge + + + Angle + Winkel + + + + VToolLinePoint + + Length + Länge + + + Angle + Winkel + + VToolOptionsPropertyBrowser @@ -10840,6 +11015,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + Länge + + + Angle + Winkel + + VToolSeamAllowance @@ -10895,6 +11081,17 @@ Do you want to save your changes? Löschen + + VToolShoulderPoint + + Length + Länge + + + Angle + Winkel + + VToolUnionDetails diff --git a/share/translations/valentina_el_GR.ts b/share/translations/valentina_el_GR.ts index 7c0bd92e3..9f604f9a2 100644 --- a/share/translations/valentina_el_GR.ts +++ b/share/translations/valentina_el_GR.ts @@ -4830,7 +4830,7 @@ Apply settings anyway? DialogSeamAllowance Seam allowance tool - Εργαλείο περιθωρίου ραφής + Εργαλείο περιθωρίου ραφής Ready! @@ -4840,10 +4840,6 @@ Apply settings anyway? Value Τιμή - - Add - Προσθήκη - Grainline Γραμμή ισιάδας @@ -4852,10 +4848,6 @@ Apply settings anyway? Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation - - on Fold - στη Δίπλωση - Reverse Αντιστροφή @@ -4884,10 +4876,6 @@ Apply settings anyway? Parser error: %1 - - Update - Ενημέρωση - Current seam allowance Τρέχων περιθώριο ραφής @@ -4932,10 +4920,6 @@ Apply settings anyway? custom seam allowance προσαρμοσμένο περιθώριο ραφής - - None - Κανένα - Both Και τα δύο @@ -5004,6 +4988,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6449,7 +6437,7 @@ Do you want to save your changes? Seam allowance tool - Εργαλείο περιθωρίου ραφής + Εργαλείο περιθωρίου ραφής Union tool @@ -6968,10 +6956,6 @@ Do you want to save your changes? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -7176,6 +7160,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7552,14 +7544,6 @@ Do you want to save your changes? PreferencesPatternPage - - User - Χρήστης - - - User name: - Όνομα χρήστη: - Graphical output @@ -7576,10 +7560,6 @@ Do you want to save your changes? Count steps (0 - no limit): - - Delete all - Διαγραφή όλων - Workpiece @@ -9296,6 +9276,13 @@ Do you want to save your changes? Λεπτομέρεια + + VAbstractSpline + + Length + Μήκος + + VAbstractTool @@ -10161,6 +10148,107 @@ Do you want to save your changes? στη δίπλωση + + VToolAlongLine + + Length + Μήκος + + + Angle + Γωνία + + + + VToolArc + + Length + Μήκος + + + Radius + Ακτίνα + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Μήκος + + + Radius + Ακτίνα + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Μήκος + + + + VToolCutArc + + Arc + Τόξο + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Καμπύλη + + + length + + + + + VToolCutSplinePath + + Curve + Καμπύλη + + + length + + + VToolDetail @@ -10208,6 +10296,69 @@ Do you want to save your changes? περιστροφή γραμμής ίσιου + + VToolEllipticalArc + + Length + Μήκος + + + Radius + Ακτίνα + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Μήκος + + + Angle + Γωνία + + + + VToolLine + + Length + Μήκος + + + Angle + Γωνία + + + + VToolLineIntersectAxis + + Length + Μήκος + + + Angle + Γωνία + + + + VToolLinePoint + + Length + Μήκος + + + Angle + Γωνία + + VToolOptionsPropertyBrowser @@ -10731,6 +10882,17 @@ Do you want to save your changes? Στυλ μαρκαδόρου: + + VToolPointOfContact + + Length + Μήκος + + + Angle + Γωνία + + VToolSeamAllowance @@ -10786,6 +10948,17 @@ Do you want to save your changes? Διαγραφή + + VToolShoulderPoint + + Length + Μήκος + + + Angle + Γωνία + + VToolUnionDetails diff --git a/share/translations/valentina_en_CA.ts b/share/translations/valentina_en_CA.ts index 22b7bfe94..b4ec2f091 100644 --- a/share/translations/valentina_en_CA.ts +++ b/share/translations/valentina_en_CA.ts @@ -4917,7 +4917,7 @@ Apply settings anyway? DialogSeamAllowance Seam allowance tool - Seam allowance tool + Seam allowance tool Ready! @@ -4927,10 +4927,6 @@ Apply settings anyway? Value Value - - Add - Add - Grainline Grainline @@ -4939,14 +4935,6 @@ Apply settings anyway? Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation - - Cut %1 of %2%3 - Cut %1 of %2%3 - - - on Fold - on Fold - Reverse Reverse @@ -4975,10 +4963,6 @@ Apply settings anyway? Parser error: %1 Parser error: %1 - - Update - Update - Current seam allowance Current seam allowance @@ -5023,14 +5007,6 @@ Apply settings anyway? custom seam allowance custom seam allowance - - None - None - - - Cut on fold - Cut on fold - Both Both @@ -5099,6 +5075,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6552,7 +6532,7 @@ Do you want to save your changes? Seam allowance tool - Seam allowance tool + Seam allowance tool Union tool @@ -7097,7 +7077,7 @@ Do you want to save your changes? Piece path tool - Piece path tool + Piece path tool Select main path objects clockwise. @@ -7303,6 +7283,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7715,14 +7703,6 @@ Do you want to save your changes? PreferencesPatternPage - - User - User - - - User name: - User name: - Graphical output Graphical output @@ -7739,14 +7719,6 @@ Do you want to save your changes? Count steps (0 - no limit): Count steps (0 - no limit): - - User defined materials - User defined materials - - - Delete all - Delete all - Workpiece Workpiece @@ -7763,10 +7735,6 @@ Do you want to save your changes? Show second passmark on seam line Show second passmark on seam line - - All user defined materials have been deleted! - All user defined materials have been deleted! - By default forbid flipping for all new created workpieces By default forbid flipping for all new created workpieces @@ -8936,38 +8904,10 @@ Do you want to save your changes? Name can't be empty Name can't be empty - - Material/Cut number/Placement - Material/Cut number/Placement - - - Cut number: - Cut number: - - - Material type: - Material type: - - - You can choose one of the predefined materials or enter a new one - You can choose one of the predefined materials or enter a new one - Placement: Placement: - - Add - Add - - - Cancel - Cancel - - - Remove - Remove - Labels Labels @@ -9579,6 +9519,13 @@ Do you want to save your changes? Detail + + VAbstractSpline + + Length + Length + + VAbstractTool @@ -10566,6 +10513,107 @@ Do you want to save your changes? on fold + + VToolAlongLine + + Length + Length + + + Angle + Angle + + + + VToolArc + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Length + + + + VToolCutArc + + Arc + Arc + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Curve + + + length + + + + + VToolCutSplinePath + + Curve + Curve + + + length + + + VToolDetail @@ -10617,6 +10665,69 @@ Do you want to save your changes? rotate grainline + + VToolEllipticalArc + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Length + + + Angle + Angle + + + + VToolLine + + Length + Length + + + Angle + Angle + + + + VToolLineIntersectAxis + + Length + Length + + + Angle + Angle + + + + VToolLinePoint + + Length + Length + + + Angle + Angle + + VToolOptionsPropertyBrowser @@ -11144,6 +11255,17 @@ Do you want to save your changes? Pen style: + + VToolPointOfContact + + Length + Length + + + Angle + Angle + + VToolSeamAllowance @@ -11199,6 +11321,17 @@ Do you want to save your changes? Delete + + VToolShoulderPoint + + Length + Length + + + Angle + Angle + + VToolUnionDetails diff --git a/share/translations/valentina_en_IN.ts b/share/translations/valentina_en_IN.ts index 2849650cb..cfb0d8fd9 100644 --- a/share/translations/valentina_en_IN.ts +++ b/share/translations/valentina_en_IN.ts @@ -4917,7 +4917,7 @@ Apply settings anyway? DialogSeamAllowance Seam allowance tool - Seam allowance tool + Seam allowance tool Ready! @@ -4927,10 +4927,6 @@ Apply settings anyway? Value Value - - Add - Add - Grainline Grainline @@ -4939,14 +4935,6 @@ Apply settings anyway? Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation - - Cut %1 of %2%3 - Cut %1 of %2%3 - - - on Fold - on Fold - Reverse Reverse @@ -4975,10 +4963,6 @@ Apply settings anyway? Parser error: %1 Parser error: %1 - - Update - Update - Current seam allowance Current seam allowance @@ -5023,14 +5007,6 @@ Apply settings anyway? custom seam allowance custom seam allowance - - None - None - - - Cut on fold - Cut on fold - Both Both @@ -5099,6 +5075,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6552,7 +6532,7 @@ Do you want to save your changes? Seam allowance tool - Seam allowance tool + Seam allowance tool Union tool @@ -7097,7 +7077,7 @@ Do you want to save your changes? Piece path tool - Piece path tool + Piece path tool Select main path objects clockwise. @@ -7303,6 +7283,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7715,14 +7703,6 @@ Do you want to save your changes? PreferencesPatternPage - - User - User - - - User name: - User name: - Graphical output Graphical output @@ -7739,14 +7719,6 @@ Do you want to save your changes? Count steps (0 - no limit): Count steps (0 - no limit): - - User defined materials - User defined materials - - - Delete all - Delete all - Workpiece Workpiece @@ -7763,10 +7735,6 @@ Do you want to save your changes? Show second passmark on seam line Show second passmark on seam line - - All user defined materials have been deleted! - All user defined materials have been deleted! - By default forbid flipping for all new created workpieces By default forbid flipping for all new created workpieces @@ -8936,38 +8904,10 @@ Do you want to save your changes? Name can't be empty Name can't be empty - - Material/Cut number/Placement - Material/Cut number/Placement - - - Cut number: - Cut number: - - - Material type: - Material type: - - - You can choose one of the predefined materials or enter a new one - You can choose one of the predefined materials or enter a new one - Placement: Placement: - - Add - Add - - - Cancel - Cancel - - - Remove - Remove - Labels Labels @@ -9579,6 +9519,13 @@ Do you want to save your changes? Detail + + VAbstractSpline + + Length + Length + + VAbstractTool @@ -10566,6 +10513,107 @@ Do you want to save your changes? on fold + + VToolAlongLine + + Length + Length + + + Angle + Angle + + + + VToolArc + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Length + + + + VToolCutArc + + Arc + Arc + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Curve + + + length + + + + + VToolCutSplinePath + + Curve + Curve + + + length + + + VToolDetail @@ -10617,6 +10665,69 @@ Do you want to save your changes? rotate grainline + + VToolEllipticalArc + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Length + + + Angle + Angle + + + + VToolLine + + Length + Length + + + Angle + Angle + + + + VToolLineIntersectAxis + + Length + Length + + + Angle + Angle + + + + VToolLinePoint + + Length + Length + + + Angle + Angle + + VToolOptionsPropertyBrowser @@ -11144,6 +11255,17 @@ Do you want to save your changes? Pen style: + + VToolPointOfContact + + Length + Length + + + Angle + Angle + + VToolSeamAllowance @@ -11199,6 +11321,17 @@ Do you want to save your changes? Delete + + VToolShoulderPoint + + Length + Length + + + Angle + Angle + + VToolUnionDetails diff --git a/share/translations/valentina_en_US.ts b/share/translations/valentina_en_US.ts index 7a067dbe4..f40111fc7 100644 --- a/share/translations/valentina_en_US.ts +++ b/share/translations/valentina_en_US.ts @@ -4917,7 +4917,7 @@ Apply settings anyway? DialogSeamAllowance Seam allowance tool - Seam allowance tool + Seam allowance tool Ready! @@ -4927,10 +4927,6 @@ Apply settings anyway? Value Value - - Add - Add - Grainline Grainline @@ -4939,14 +4935,6 @@ Apply settings anyway? Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation - - Cut %1 of %2%3 - Cut %1 of %2%3 - - - on Fold - on Fold - Reverse Reverse @@ -4975,10 +4963,6 @@ Apply settings anyway? Parser error: %1 Parser error: %1 - - Update - Update - Current seam allowance Current seam allowance @@ -5023,14 +5007,6 @@ Apply settings anyway? custom seam allowance custom seam allowance - - None - None - - - Cut on fold - Cut on fold - Both Both @@ -5099,6 +5075,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6552,7 +6532,7 @@ Do you want to save your changes? Seam allowance tool - Seam allowance tool + Seam allowance tool Union tool @@ -7097,7 +7077,7 @@ Do you want to save your changes? Piece path tool - Piece path tool + Piece path tool Select main path objects clockwise. @@ -7303,6 +7283,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7715,14 +7703,6 @@ Do you want to save your changes? PreferencesPatternPage - - User - User - - - User name: - User name: - Graphical output Graphical output @@ -7739,14 +7719,6 @@ Do you want to save your changes? Count steps (0 - no limit): Count steps (0 - no limit): - - User defined materials - User defined materials - - - Delete all - Delete all - Workpiece Workpiece @@ -7763,10 +7735,6 @@ Do you want to save your changes? Show second passmark on seam line Show second passmark on seam line - - All user defined materials have been deleted! - All user defined materials have been deleted! - By default forbid flipping for all new created workpieces By default forbid flipping for all new created workpieces @@ -8936,38 +8904,10 @@ Do you want to save your changes? Name can't be empty Name can't be empty - - Material/Cut number/Placement - Material/Cut number/Placement - - - Cut number: - Cut number: - - - Material type: - Material type: - - - You can choose one of the predefined materials or enter a new one - You can choose one of the predefined materials or enter a new one - Placement: Placement: - - Add - Add - - - Cancel - Cancel - - - Remove - Remove - Labels Labels @@ -9579,6 +9519,13 @@ Do you want to save your changes? Detail + + VAbstractSpline + + Length + Length + + VAbstractTool @@ -10566,6 +10513,107 @@ Do you want to save your changes? on fold + + VToolAlongLine + + Length + Length + + + Angle + Angle + + + + VToolArc + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Length + + + + VToolCutArc + + Arc + Arc + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Curve + + + length + + + + + VToolCutSplinePath + + Curve + Curve + + + length + + + VToolDetail @@ -10617,6 +10665,69 @@ Do you want to save your changes? rotate grainline + + VToolEllipticalArc + + Length + Length + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Length + + + Angle + Angle + + + + VToolLine + + Length + Length + + + Angle + Angle + + + + VToolLineIntersectAxis + + Length + Length + + + Angle + Angle + + + + VToolLinePoint + + Length + Length + + + Angle + Angle + + VToolOptionsPropertyBrowser @@ -11144,6 +11255,17 @@ Do you want to save your changes? Pen style: + + VToolPointOfContact + + Length + Length + + + Angle + Angle + + VToolSeamAllowance @@ -11199,6 +11321,17 @@ Do you want to save your changes? Delete + + VToolShoulderPoint + + Length + Length + + + Angle + Angle + + VToolUnionDetails diff --git a/share/translations/valentina_es_ES.ts b/share/translations/valentina_es_ES.ts index da092c9a3..9faed58a3 100644 --- a/share/translations/valentina_es_ES.ts +++ b/share/translations/valentina_es_ES.ts @@ -4917,7 +4917,7 @@ Apply settings anyway? DialogSeamAllowance Seam allowance tool - Herramienta para las costuras + Herramienta para las costuras Ready! @@ -4927,10 +4927,6 @@ Apply settings anyway? Value Valor - - Add - Agregar - Grainline Línea discontinua @@ -4939,14 +4935,6 @@ Apply settings anyway? Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation Selecionar objetos principales del trayecto, <b>Mayúsculas</b> - curva de sentido inverso, <b>Intro</b> - finalizar creación - - Cut %1 of %2%3 - Cortar %1 de %2%3 - - - on Fold - en Pliegue - Reverse Revés @@ -4975,10 +4963,6 @@ Apply settings anyway? Parser error: %1 Error en análisis: %1 - - Update - Actualizar - Current seam allowance Coste de costura actual @@ -5023,14 +5007,6 @@ Apply settings anyway? custom seam allowance Personalizar el margen de la costura - - None - Ninguno - - - Cut on fold - Cortar pliegue - Both Ambos @@ -5099,6 +5075,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6552,7 +6532,7 @@ Quiere guardar los cambios? Seam allowance tool - Herramienta para las costuras + Herramienta para las costuras Union tool @@ -7097,7 +7077,7 @@ Quiere guardar los cambios? Piece path tool - Herramienta de trayectoria de piezas + Herramienta de trayectoria de piezas Select main path objects clockwise. @@ -7303,6 +7283,14 @@ Quiere guardar los cambios? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -9530,6 +9518,13 @@ Do you want to save your changes? Detalle + + VAbstractSpline + + Length + Longitud + + VAbstractTool @@ -10517,6 +10512,107 @@ Do you want to save your changes? en pliegue + + VToolAlongLine + + Length + Longitud + + + Angle + Ángulo + + + + VToolArc + + Length + Longitud + + + Radius + Radios + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Longitud + + + Radius + Radios + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Longitud + + + + VToolCutArc + + Arc + Arco + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Curva + + + length + + + + + VToolCutSplinePath + + Curve + Curva + + + length + + + VToolDetail @@ -10568,6 +10664,69 @@ Do you want to save your changes? rotar línea discontinua + + VToolEllipticalArc + + Length + Longitud + + + Radius + Radios + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Longitud + + + Angle + Ángulo + + + + VToolLine + + Length + Longitud + + + Angle + Ángulo + + + + VToolLineIntersectAxis + + Length + Longitud + + + Angle + Ángulo + + + + VToolLinePoint + + Length + Longitud + + + Angle + Ángulo + + VToolOptionsPropertyBrowser @@ -11095,6 +11254,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + Longitud + + + Angle + Ángulo + + VToolSeamAllowance @@ -11150,6 +11320,17 @@ Do you want to save your changes? Borrar + + VToolShoulderPoint + + Length + Longitud + + + Angle + Ángulo + + VToolUnionDetails diff --git a/share/translations/valentina_fi_FI.ts b/share/translations/valentina_fi_FI.ts index 3aa0cb09c..dbed1cdd3 100644 --- a/share/translations/valentina_fi_FI.ts +++ b/share/translations/valentina_fi_FI.ts @@ -4326,10 +4326,6 @@ Apply settings anyway? DialogSeamAllowance - - Seam allowance tool - Saumavara työkalu - Ready! @@ -4486,6 +4482,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -5879,7 +5879,7 @@ Haluatko tallentaa muutokset? Seam allowance tool - Saumavara työkalu + Saumavara työkalu Union tool @@ -6289,10 +6289,6 @@ Haluatko tallentaa muutokset? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -6497,6 +6493,14 @@ Haluatko tallentaa muutokset? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -8438,6 +8442,13 @@ Do you want to save your changes? Yksityiskohta + + VAbstractSpline + + Length + Pituus + + VAbstractTool @@ -9310,6 +9321,107 @@ Do you want to save your changes? Slinipolkua ei voi leikata yhdellä pisteellä + + VToolAlongLine + + Length + Pituus + + + Angle + Kulma + + + + VToolArc + + Length + Pituus + + + Radius + Säde + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Pituus + + + Radius + Säde + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Pituus + + + + VToolCutArc + + Arc + Kaari + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Käyrä + + + length + + + + + VToolCutSplinePath + + Curve + Käyrä + + + length + + + VToolDetail @@ -9321,6 +9433,69 @@ Do you want to save your changes? Poista + + VToolEllipticalArc + + Length + Pituus + + + Radius + Säde + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Pituus + + + Angle + Kulma + + + + VToolLine + + Length + Pituus + + + Angle + Kulma + + + + VToolLineIntersectAxis + + Length + Pituus + + + Angle + Kulma + + + + VToolLinePoint + + Length + Pituus + + + Angle + Kulma + + VToolOptionsPropertyBrowser @@ -9788,6 +9963,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + Pituus + + + Angle + Kulma + + VToolSeamAllowance @@ -9843,6 +10029,17 @@ Do you want to save your changes? Poista + + VToolShoulderPoint + + Length + Pituus + + + Angle + Kulma + + VToolUnionDetails diff --git a/share/translations/valentina_fr_FR.ts b/share/translations/valentina_fr_FR.ts index 23c650dc4..7577fab8c 100644 --- a/share/translations/valentina_fr_FR.ts +++ b/share/translations/valentina_fr_FR.ts @@ -4914,7 +4914,7 @@ Appliquer les réglages quand-même ? DialogSeamAllowance Seam allowance tool - Outil marge de couture + Outil marge de couture Ready! @@ -4924,10 +4924,6 @@ Appliquer les réglages quand-même ? Value Valeur - - Add - Ajouter - Grainline Droit-fil @@ -4964,10 +4960,6 @@ Appliquer les réglages quand-même ? Parser error: %1 Erreur d'analyse : %1 - - Update - Mise à jour - Current seam allowance Marge de couture actuelle @@ -5012,10 +5004,6 @@ Appliquer les réglages quand-même ? custom seam allowance - - None - Aucun - Both Les deux @@ -5084,6 +5072,10 @@ Appliquer les réglages quand-même ? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6537,7 +6529,7 @@ Voulez-vous sauvegarder les changements? Seam allowance tool - Outil marge de couture + Outil marge de couture Union tool @@ -7080,10 +7072,6 @@ Voulez-vous sauvegarder les changements? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -7288,6 +7276,14 @@ Voulez-vous sauvegarder les changements? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -9500,6 +9496,13 @@ Voulez-vous enregistrer les changements? Pièce de patron + + VAbstractSpline + + Length + Longueur + + VAbstractTool @@ -10478,6 +10481,107 @@ Voulez-vous enregistrer les changements? Couper + + VToolAlongLine + + Length + Longueur + + + Angle + Angle + + + + VToolArc + + Length + Longueur + + + Radius + Rayon + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Longueur + + + Radius + Rayon + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Longueur + + + + VToolCutArc + + Arc + Arc + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Courbe + + + length + + + + + VToolCutSplinePath + + Curve + Courbe + + + length + + + VToolDetail @@ -10521,6 +10625,69 @@ Voulez-vous enregistrer les changements? redimensionner le droit-fil + + VToolEllipticalArc + + Length + Longueur + + + Radius + Rayon + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Longueur + + + Angle + Angle + + + + VToolLine + + Length + Longueur + + + Angle + Angle + + + + VToolLineIntersectAxis + + Length + Longueur + + + Angle + Angle + + + + VToolLinePoint + + Length + Longueur + + + Angle + Angle + + VToolOptionsPropertyBrowser @@ -11044,6 +11211,17 @@ Voulez-vous enregistrer les changements? + + VToolPointOfContact + + Length + Longueur + + + Angle + Angle + + VToolSeamAllowance @@ -11099,6 +11277,17 @@ Voulez-vous enregistrer les changements? Effacer + + VToolShoulderPoint + + Length + Longueur + + + Angle + Angle + + VToolUnionDetails diff --git a/share/translations/valentina_he_IL.ts b/share/translations/valentina_he_IL.ts index 7791810de..7c819d42c 100644 --- a/share/translations/valentina_he_IL.ts +++ b/share/translations/valentina_he_IL.ts @@ -3628,10 +3628,6 @@ Apply settings anyway? DialogSeamAllowance - - Seam allowance tool - - Ready! @@ -3788,6 +3784,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -5006,10 +5006,6 @@ Do you want to save your changes? Point intersect arc and axis - - Seam allowance tool - - Union tool @@ -5414,10 +5410,6 @@ Do you want to save your changes? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -5622,6 +5614,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7388,6 +7388,13 @@ Do you want to save your changes? + + VAbstractSpline + + Length + אורך + + VAbstractTool @@ -8195,6 +8202,107 @@ Do you want to save your changes? + + VToolAlongLine + + Length + אורך + + + Angle + + + + + VToolArc + + Length + אורך + + + Radius + רדיוס + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + אורך + + + Radius + רדיוס + + + Start angle + + + + End angle + + + + + VToolCut + + Length + אורך + + + + VToolCutArc + + Arc + + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + עקומה + + + length + + + + + VToolCutSplinePath + + Curve + עקומה + + + length + + + VToolDetail @@ -8206,6 +8314,69 @@ Do you want to save your changes? למחוק + + VToolEllipticalArc + + Length + אורך + + + Radius + רדיוס + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + אורך + + + Angle + + + + + VToolLine + + Length + אורך + + + Angle + + + + + VToolLineIntersectAxis + + Length + אורך + + + Angle + + + + + VToolLinePoint + + Length + אורך + + + Angle + + + VToolOptionsPropertyBrowser @@ -8637,6 +8808,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + אורך + + + Angle + + + VToolSeamAllowance @@ -8692,6 +8874,17 @@ Do you want to save your changes? למחוק + + VToolShoulderPoint + + Length + אורך + + + Angle + + + VToolUnionDetails diff --git a/share/translations/valentina_id_ID.ts b/share/translations/valentina_id_ID.ts index 4c72a26bb..af3a0686a 100644 --- a/share/translations/valentina_id_ID.ts +++ b/share/translations/valentina_id_ID.ts @@ -3951,10 +3951,6 @@ Apply settings anyway? DialogSeamAllowance - - Seam allowance tool - - Ready! @@ -4111,6 +4107,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -5350,10 +5350,6 @@ Apakah anda ingin menyimpan perubahan anda? Point intersect arc and axis - - Seam allowance tool - - Union tool @@ -5758,10 +5754,6 @@ Apakah anda ingin menyimpan perubahan anda? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -5966,6 +5958,14 @@ Apakah anda ingin menyimpan perubahan anda? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7774,6 +7774,13 @@ Do you want to save your changes? rincial + + VAbstractSpline + + Length + panjang + + VAbstractTool @@ -8581,6 +8588,107 @@ Do you want to save your changes? + + VToolAlongLine + + Length + panjang + + + Angle + sudut + + + + VToolArc + + Length + panjang + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + panjang + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolCut + + Length + panjang + + + + VToolCutArc + + Arc + busur + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + kurva + + + length + + + + + VToolCutSplinePath + + Curve + kurva + + + length + + + VToolDetail @@ -8592,6 +8700,69 @@ Do you want to save your changes? hapus + + VToolEllipticalArc + + Length + panjang + + + Radius + Radius + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + panjang + + + Angle + sudut + + + + VToolLine + + Length + panjang + + + Angle + sudut + + + + VToolLineIntersectAxis + + Length + panjang + + + Angle + sudut + + + + VToolLinePoint + + Length + panjang + + + Angle + sudut + + VToolOptionsPropertyBrowser @@ -9035,6 +9206,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + panjang + + + Angle + sudut + + VToolSeamAllowance @@ -9090,6 +9272,17 @@ Do you want to save your changes? hapus + + VToolShoulderPoint + + Length + panjang + + + Angle + sudut + + VToolUnionDetails diff --git a/share/translations/valentina_it_IT.ts b/share/translations/valentina_it_IT.ts index 0f8899c65..57be93ad0 100644 --- a/share/translations/valentina_it_IT.ts +++ b/share/translations/valentina_it_IT.ts @@ -4815,10 +4815,6 @@ Applicare le impostazioni comunque? DialogSeamAllowance - - Seam allowance tool - Strumento margine di cucitura - Ready! Pronto! @@ -4975,6 +4971,10 @@ Applicare le impostazioni comunque? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6428,7 +6428,7 @@ Vuoi salvare i cambiamenti? Seam allowance tool - Strumento margine di cucitura + Strumento margine di cucitura Union tool @@ -6971,10 +6971,6 @@ Vuoi salvare i cambiamenti? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -7179,6 +7175,14 @@ Vuoi salvare i cambiamenti? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -9383,6 +9387,13 @@ Vuoi salvare le tue modifiche? Dettaglio + + VAbstractSpline + + Length + Lunghezza + + VAbstractTool @@ -10300,6 +10311,107 @@ Vuoi salvare le tue modifiche? sulla Piega + + VToolAlongLine + + Length + Lunghezza + + + Angle + Angolo + + + + VToolArc + + Length + Lunghezza + + + Radius + Raggio + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Lunghezza + + + Radius + Raggio + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Lunghezza + + + + VToolCutArc + + Arc + Arco + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + + + + length + + + + + VToolCutSplinePath + + Curve + + + + length + + + VToolDetail @@ -10311,6 +10423,69 @@ Vuoi salvare le tue modifiche? Elimina + + VToolEllipticalArc + + Length + Lunghezza + + + Radius + Raggio + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Lunghezza + + + Angle + Angolo + + + + VToolLine + + Length + Lunghezza + + + Angle + Angolo + + + + VToolLineIntersectAxis + + Length + Lunghezza + + + Angle + Angolo + + + + VToolLinePoint + + Length + Lunghezza + + + Angle + Angolo + + VToolOptionsPropertyBrowser @@ -10802,6 +10977,17 @@ Vuoi salvare le tue modifiche? + + VToolPointOfContact + + Length + Lunghezza + + + Angle + Angolo + + VToolSeamAllowance @@ -10857,6 +11043,17 @@ Vuoi salvare le tue modifiche? Elimina + + VToolShoulderPoint + + Length + Lunghezza + + + Angle + Angolo + + VToolUnionDetails diff --git a/share/translations/valentina_nl_NL.ts b/share/translations/valentina_nl_NL.ts index 5e9116ae1..5f3027ede 100644 --- a/share/translations/valentina_nl_NL.ts +++ b/share/translations/valentina_nl_NL.ts @@ -4917,7 +4917,7 @@ Toch de instellingen aanpassen? DialogSeamAllowance Seam allowance tool - Naadtoeslag gereedschap + Naadtoeslag gereedschap Ready! @@ -4927,10 +4927,6 @@ Toch de instellingen aanpassen? Value Waarde - - Add - Voeg toe - Grainline Recht van draad @@ -4939,14 +4935,6 @@ Toch de instellingen aanpassen? Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation Selecteer hoofdpad-objecten met de klok mee,<b>Shift</b> - draai richting kromming om, <b>Enter</b> - einde creatie - - Cut %1 of %2%3 - Knip %1 of %2%3 - - - on Fold - Op vouw - Reverse Keer om @@ -4975,10 +4963,6 @@ Toch de instellingen aanpassen? Parser error: %1 Verwerkingsfout: %1 - - Update - Opwaardering - Current seam allowance Huidige naadtoeslag @@ -5023,14 +5007,6 @@ Toch de instellingen aanpassen? custom seam allowance aangepaste naadtoeslag - - None - Geen - - - Cut on fold - Knip op de vouw - Both Beide @@ -5099,6 +5075,10 @@ Toch de instellingen aanpassen? To open all detail's features complete creating the main path. Om alle functie details te openen maak het hoofdpad volledig af. + + Workpiece tool + + DialogShoulderPoint @@ -6551,7 +6531,7 @@ Do you want to save your changes? Seam allowance tool - Naadtoeslag gereedschap + Naadtoeslag gereedschap Union tool @@ -7096,7 +7076,7 @@ Do you want to save your changes? Piece path tool - Gereedschap om pad van onderdeel te bepalen + Gereedschap om pad van onderdeel te bepalen Select main path objects clockwise. @@ -7302,6 +7282,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7714,14 +7702,6 @@ Do you want to save your changes? PreferencesPatternPage - - User - Gebruiker - - - User name: - Gebruikers naam: - Graphical output Grafische voltooiing @@ -7738,14 +7718,6 @@ Do you want to save your changes? Count steps (0 - no limit): Tel stappen (0 - geen limiet): - - User defined materials - Door gebruiker gedefinieerde materialen - - - Delete all - Verwijder alles - Workpiece Werkstuk @@ -7762,10 +7734,6 @@ Do you want to save your changes? Show second passmark on seam line Toon tweede pasmarkering op de naadlijn - - All user defined materials have been deleted! - Alle door de gebruiker gedefinieerde materialen zijn verwijderd! - By default forbid flipping for all new created workpieces Standaard is het kantelen voor alle nieuwe werkstukken uitgeschakeld @@ -8935,38 +8903,10 @@ Wil je deze veranderingen opslaan? Name can't be empty Naam mag niet leeg zijn - - Material/Cut number/Placement - Materiaal/Snijnummer/Positie - - - Cut number: - Snijnummer: - - - Material type: - Materiaalsoort: - - - You can choose one of the predefined materials or enter a new one - U kunt kiezen uit een van de voorgedefinieerde materialen of voeg een nieuwe toe - Placement: Positie: - - Add - Voeg toe - - - Cancel - Stop - - - Remove - Verwijder - Labels Labels @@ -9578,6 +9518,13 @@ Wil je deze veranderingen opslaan? Detail + + VAbstractSpline + + Length + Lengte + + VAbstractTool @@ -10565,6 +10512,107 @@ Wil je deze veranderingen opslaan? op vouw + + VToolAlongLine + + Length + Lengte + + + Angle + Hoek + + + + VToolArc + + Length + Lengte + + + Radius + Straal + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Lengte + + + Radius + Straal + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Lengte + + + + VToolCutArc + + Arc + Boog + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Kromming + + + length + + + + + VToolCutSplinePath + + Curve + Kromming + + + length + + + VToolDetail @@ -10616,6 +10664,69 @@ Wil je deze veranderingen opslaan? draai de recht-van-draad + + VToolEllipticalArc + + Length + Lengte + + + Radius + Straal + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Lengte + + + Angle + Hoek + + + + VToolLine + + Length + Lengte + + + Angle + Hoek + + + + VToolLineIntersectAxis + + Length + Lengte + + + Angle + Hoek + + + + VToolLinePoint + + Length + Lengte + + + Angle + Hoek + + VToolOptionsPropertyBrowser @@ -11143,6 +11254,17 @@ Wil je deze veranderingen opslaan? Pen stijl: + + VToolPointOfContact + + Length + Lengte + + + Angle + Hoek + + VToolSeamAllowance @@ -11198,6 +11320,17 @@ Wil je deze veranderingen opslaan? Verwijder + + VToolShoulderPoint + + Length + Lengte + + + Angle + Hoek + + VToolUnionDetails diff --git a/share/translations/valentina_pt_BR.ts b/share/translations/valentina_pt_BR.ts index 942e57701..ea1cf81a1 100644 --- a/share/translations/valentina_pt_BR.ts +++ b/share/translations/valentina_pt_BR.ts @@ -4742,10 +4742,6 @@ Apply settings anyway? DialogSeamAllowance - - Seam allowance tool - Ferramenta de margem de costura - Ready! Pronto! @@ -4754,10 +4750,6 @@ Apply settings anyway? Value Valor - - Add - Adicionar - Grainline Fio @@ -4766,14 +4758,6 @@ Apply settings anyway? Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation - - Cut %1 of %2%3 - Cortar %1 de %2%3 - - - on Fold - na Dobra do Tecido - Reverse Reverso @@ -4802,10 +4786,6 @@ Apply settings anyway? Parser error: %1 - - Update - Atualizar - Current seam allowance @@ -4850,10 +4830,6 @@ Apply settings anyway? custom seam allowance - - Cut on fold - Cortar e dobrar - Both Ambos @@ -4922,6 +4898,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -6198,7 +6178,7 @@ Do you want to save your changes? Seam allowance tool - Ferramenta de margem de costura + Ferramenta de margem de costura Union tool @@ -6616,10 +6596,6 @@ Do you want to save your changes? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -6824,6 +6800,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -8153,38 +8137,10 @@ Do you want to save your changes? Name can't be empty Nome não pode ficar vazio - - Material/Cut number/Placement - Material/Número de corte/Colocação - - - Cut number: - Número do cartão: - - - Material type: - Tipo de material: - - - You can choose one of the predefined materials or enter a new one - Você pode escolher um dos materiais predefinidos ou inserir um novo - Placement: Colocação: - - Add - Adicionar - - - Cancel - Cancelar - - - Remove - Remover - Labels @@ -8749,6 +8705,13 @@ Do you want to save your changes? Detalhe + + VAbstractSpline + + Length + Comprimento + + VAbstractTool @@ -9582,6 +9545,107 @@ Do you want to save your changes? na Dobra do Tecido + + VToolAlongLine + + Length + Comprimento + + + Angle + Ângulo + + + + VToolArc + + Length + Comprimento + + + Radius + + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Comprimento + + + Radius + + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Comprimento + + + + VToolCutArc + + Arc + Arco + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Curva + + + length + + + + + VToolCutSplinePath + + Curve + Curva + + + length + + + VToolDetail @@ -9593,6 +9657,69 @@ Do you want to save your changes? Excluir + + VToolEllipticalArc + + Length + Comprimento + + + Radius + + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Comprimento + + + Angle + Ângulo + + + + VToolLine + + Length + Comprimento + + + Angle + Ângulo + + + + VToolLineIntersectAxis + + Length + Comprimento + + + Angle + Ângulo + + + + VToolLinePoint + + Length + Comprimento + + + Angle + Ângulo + + VToolOptionsPropertyBrowser @@ -10048,6 +10175,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + Comprimento + + + Angle + Ângulo + + VToolSeamAllowance @@ -10103,6 +10241,17 @@ Do you want to save your changes? Excluir + + VToolShoulderPoint + + Length + Comprimento + + + Angle + Ângulo + + VToolUnionDetails diff --git a/share/translations/valentina_ro_RO.ts b/share/translations/valentina_ro_RO.ts index 5dc6c29f4..cf3408ab7 100644 --- a/share/translations/valentina_ro_RO.ts +++ b/share/translations/valentina_ro_RO.ts @@ -4375,10 +4375,6 @@ Apply settings anyway? DialogSeamAllowance - - Seam allowance tool - Instrument pentru adaos la cusătură - Ready! Gata! @@ -4535,6 +4531,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -5923,7 +5923,7 @@ Do you want to save your changes? Seam allowance tool - Instrument pentru adaos la cusătură + Instrument pentru adaos la cusătură Union tool @@ -6329,10 +6329,6 @@ Do you want to save your changes? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -6537,6 +6533,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -8403,6 +8407,13 @@ Do you want to save your changes? Detalii + + VAbstractSpline + + Length + Lungime + + VAbstractTool @@ -9214,6 +9225,107 @@ Do you want to save your changes? + + VToolAlongLine + + Length + Lungime + + + Angle + Unghi + + + + VToolArc + + Length + Lungime + + + Radius + Rază + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Lungime + + + Radius + Rază + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Lungime + + + + VToolCutArc + + Arc + Curbura + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Curbură + + + length + + + + + VToolCutSplinePath + + Curve + Curbură + + + length + + + VToolDetail @@ -9225,6 +9337,69 @@ Do you want to save your changes? Șterge + + VToolEllipticalArc + + Length + Lungime + + + Radius + Rază + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Lungime + + + Angle + Unghi + + + + VToolLine + + Length + Lungime + + + Angle + Unghi + + + + VToolLineIntersectAxis + + Length + Lungime + + + Angle + Unghi + + + + VToolLinePoint + + Length + Lungime + + + Angle + Unghi + + VToolOptionsPropertyBrowser @@ -9680,6 +9855,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + Lungime + + + Angle + Unghi + + VToolSeamAllowance @@ -9735,6 +9921,17 @@ Do you want to save your changes? Șterge + + VToolShoulderPoint + + Length + Lungime + + + Angle + Unghi + + VToolUnionDetails diff --git a/share/translations/valentina_ru_RU.ts b/share/translations/valentina_ru_RU.ts index b34b3109b..aff3b2482 100644 --- a/share/translations/valentina_ru_RU.ts +++ b/share/translations/valentina_ru_RU.ts @@ -4917,7 +4917,7 @@ Apply settings anyway? DialogSeamAllowance Seam allowance tool - Деталь + Деталь Ready! @@ -4927,10 +4927,6 @@ Apply settings anyway? Value Значение - - Add - Добавить - Grainline Долевая нить @@ -4939,14 +4935,6 @@ Apply settings anyway? Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation Выберите объекты основного контура по часовой стрелке, <b>Shift</b> - обратное направление кривой, <b>Enter</b> - закончить создание - - Cut %1 of %2%3 - Раскрой %1 из %2%3 - - - on Fold - на сгибе - Reverse Изменить направление @@ -4975,10 +4963,6 @@ Apply settings anyway? Parser error: %1 Ошибка синтаксического анализа: %1 - - Update - Обновление - Current seam allowance Текущая прибавка на швы @@ -5023,14 +5007,6 @@ Apply settings anyway? custom seam allowance пользовательская прибавка на швы - - None - Произвольное - - - Cut on fold - Размещать на сгибе - Both Обе @@ -5099,6 +5075,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. Для открытия всех функций детали закончите создание главного контура. + + Workpiece tool + + DialogShoulderPoint @@ -6551,7 +6531,7 @@ Do you want to save your changes? Seam allowance tool - Деталь + Деталь Union tool @@ -7097,7 +7077,7 @@ Do you want to save your changes? Piece path tool - Инструмент контур детали + Инструмент контур детали Select main path objects clockwise. @@ -7303,6 +7283,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7715,14 +7703,6 @@ Do you want to save your changes? PreferencesPatternPage - - User - Пользователь - - - User name: - Имя пользователя: - Graphical output Графический вывод @@ -7739,14 +7719,6 @@ Do you want to save your changes? Count steps (0 - no limit): Количество шагов (0 - без ограничений): - - User defined materials - Установленные пользователем материалы - - - Delete all - Удалить все - Workpiece Деталь @@ -7763,10 +7735,6 @@ Do you want to save your changes? Show second passmark on seam line Показать вторую надсечку на линии шва - - All user defined materials have been deleted! - Все установленные пользователем материалы удалены! - By default forbid flipping for all new created workpieces По умолчанию запретить поворот для всех вновь созданных заготовок деталей @@ -8936,38 +8904,10 @@ Do you want to save your changes? Name can't be empty Имя не может быть пустым - - Material/Cut number/Placement - Материал/количество в раскрое/размещение - - - Cut number: - Количество в раскрое: - - - Material type: - Тип материала: - - - You can choose one of the predefined materials or enter a new one - Вы можете выбрать один из предустановленных в системе материалов или ввести новый - Placement: Размещение: - - Add - Добавить - - - Cancel - Отмена - - - Remove - Удалить - Labels Метки @@ -9579,6 +9519,13 @@ Do you want to save your changes? Деталь + + VAbstractSpline + + Length + Длина + + VAbstractTool @@ -10566,6 +10513,107 @@ Do you want to save your changes? на сгибе + + VToolAlongLine + + Length + Длина + + + Angle + Угол + + + + VToolArc + + Length + Длина + + + Radius + Радиус + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Длина + + + Radius + Радиус + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Длина + + + + VToolCutArc + + Arc + Дуга + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Кривая + + + length + + + + + VToolCutSplinePath + + Curve + Кривая + + + length + + + VToolDetail @@ -10617,6 +10665,69 @@ Do you want to save your changes? повернуть долевую + + VToolEllipticalArc + + Length + Длина + + + Radius + Радиус + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Длина + + + Angle + Угол + + + + VToolLine + + Length + Длина + + + Angle + Угол + + + + VToolLineIntersectAxis + + Length + Длина + + + Angle + Угол + + + + VToolLinePoint + + Length + Длина + + + Angle + Угол + + VToolOptionsPropertyBrowser @@ -11144,6 +11255,17 @@ Do you want to save your changes? Стиль пера: + + VToolPointOfContact + + Length + Длина + + + Angle + Угол + + VToolSeamAllowance @@ -11199,6 +11321,17 @@ Do you want to save your changes? Удалить + + VToolShoulderPoint + + Length + Длина + + + Angle + Угол + + VToolUnionDetails diff --git a/share/translations/valentina_uk_UA.ts b/share/translations/valentina_uk_UA.ts index 9653d2cb6..0bc2d7470 100644 --- a/share/translations/valentina_uk_UA.ts +++ b/share/translations/valentina_uk_UA.ts @@ -4917,7 +4917,7 @@ Apply settings anyway? DialogSeamAllowance Seam allowance tool - Інструмент прибавка на шви + Інструмент прибавка на шви Ready! @@ -4927,10 +4927,6 @@ Apply settings anyway? Value Значення - - Add - Додати - Grainline Нитка основи @@ -4939,14 +4935,6 @@ Apply settings anyway? Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation Виберіть об'єкти основного контуру за годиниковою стрілкою, <b>Shift</b> - обернути напрямок кривої, <b>Enter</b> - закінчити створення - - Cut %1 of %2%3 - Вирізати %1 %2%3 - - - on Fold - на згиб - Reverse Протилежний напрямок @@ -4975,10 +4963,6 @@ Apply settings anyway? Parser error: %1 Помилка синтаксичного аналізу: %1 - - Update - Оновити - Current seam allowance Поточна прибавка на шви @@ -5023,14 +5007,6 @@ Apply settings anyway? custom seam allowance користувацька прибавка на шви - - None - Жодного - - - Cut on fold - Вирізати на згиб - Both В обидві сторони @@ -5099,6 +5075,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. Для відкриття всіх функцій деталі завершіть створення основного контура. + + Workpiece tool + + DialogShoulderPoint @@ -6551,7 +6531,7 @@ Do you want to save your changes? Seam allowance tool - Деталь + Деталь Union tool @@ -7096,7 +7076,7 @@ Do you want to save your changes? Piece path tool - Інструмент контур деталі + Інструмент контур деталі Select main path objects clockwise. @@ -7302,6 +7282,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7714,14 +7702,6 @@ Do you want to save your changes? PreferencesPatternPage - - User - Користувач - - - User name: - Ім'я користувача: - Graphical output Графічний вивід @@ -7738,14 +7718,6 @@ Do you want to save your changes? Count steps (0 - no limit): Кількість кроків (0 - без обмежень): - - User defined materials - Встановленні користувачем матеріали - - - Delete all - Видалити всі - Workpiece Деталь @@ -7762,10 +7734,6 @@ Do you want to save your changes? Show second passmark on seam line Показати другу надсічку на лінії шва - - All user defined materials have been deleted! - Всі додані користувачем матеріали були видалені! - By default forbid flipping for all new created workpieces За замовчуванням заборонити віддзеркалення для всіх нових створених деталей @@ -8935,38 +8903,10 @@ Do you want to save your changes? Name can't be empty Ім'я не може бути пустим - - Material/Cut number/Placement - Матеріал/Кількість деталей/Розташування - - - Cut number: - Кількість деталей: - - - Material type: - Тип матеріалу: - - - You can choose one of the predefined materials or enter a new one - Ви можете вибрати один з стандартних матеріалів або ввести свій - Placement: Розташування: - - Add - Додати - - - Cancel - Відмінити - - - Remove - Видалити - Labels Мітки @@ -9578,6 +9518,13 @@ Do you want to save your changes? Деталь + + VAbstractSpline + + Length + Довжина + + VAbstractTool @@ -10564,6 +10511,107 @@ Do you want to save your changes? на згиб + + VToolAlongLine + + Length + Довжина + + + Angle + Кут + + + + VToolArc + + Length + Довжина + + + Radius + Радіус + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + Довжина + + + Radius + Радіус + + + Start angle + + + + End angle + + + + + VToolCut + + Length + Довжина + + + + VToolCutArc + + Arc + Дуга + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + Крива + + + length + + + + + VToolCutSplinePath + + Curve + Крива + + + length + + + VToolDetail @@ -10615,6 +10663,69 @@ Do you want to save your changes? обернути нитку основи + + VToolEllipticalArc + + Length + Довжина + + + Radius + Радіус + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + Довжина + + + Angle + Кут + + + + VToolLine + + Length + Довжина + + + Angle + Кут + + + + VToolLineIntersectAxis + + Length + Довжина + + + Angle + Кут + + + + VToolLinePoint + + Length + Довжина + + + Angle + Кут + + VToolOptionsPropertyBrowser @@ -11142,6 +11253,17 @@ Do you want to save your changes? Тип пера: + + VToolPointOfContact + + Length + Довжина + + + Angle + Кут + + VToolSeamAllowance @@ -11197,6 +11319,17 @@ Do you want to save your changes? Видалити + + VToolShoulderPoint + + Length + Довжина + + + Angle + Кут + + VToolUnionDetails diff --git a/share/translations/valentina_zh_CN.ts b/share/translations/valentina_zh_CN.ts index 45b0f7501..6a49136b9 100644 --- a/share/translations/valentina_zh_CN.ts +++ b/share/translations/valentina_zh_CN.ts @@ -3702,10 +3702,6 @@ Apply settings anyway? DialogSeamAllowance - - Seam allowance tool - - Ready! @@ -3862,6 +3858,10 @@ Apply settings anyway? To open all detail's features complete creating the main path. + + Workpiece tool + + DialogShoulderPoint @@ -5072,10 +5072,6 @@ Do you want to save your changes? Point intersect arc and axis - - Seam allowance tool - - Union tool @@ -5480,10 +5476,6 @@ Do you want to save your changes? Select point of center of elliptical arc - - Piece path tool - - Select main path objects clockwise. @@ -5688,6 +5680,14 @@ Do you want to save your changes? Label template editor + + Workpiece tool + + + + Internal path tool + + MainWindowsNoGUI @@ -7537,6 +7537,13 @@ Do you want to save your changes? + + VAbstractSpline + + Length + 长度 + + VAbstractTool @@ -8344,6 +8351,107 @@ Do you want to save your changes? + + VToolAlongLine + + Length + 长度 + + + Angle + + + + + VToolArc + + Length + 长度 + + + Radius + + + + Start angle + + + + End angle + + + + + VToolArcWithLength + + Length + 长度 + + + Radius + + + + Start angle + + + + End angle + + + + + VToolCut + + Length + 长度 + + + + VToolCutArc + + Arc + + + + length + + + + start angle + + + + end angle + + + + radius + + + + + VToolCutSpline + + Curve + + + + length + + + + + VToolCutSplinePath + + Curve + + + + length + + + VToolDetail @@ -8351,6 +8459,69 @@ Do you want to save your changes? 删除 + + VToolEllipticalArc + + Length + 长度 + + + Radius + + + + Start angle + + + + End angle + + + + + VToolHeight + + Length + 长度 + + + Angle + + + + + VToolLine + + Length + 长度 + + + Angle + + + + + VToolLineIntersectAxis + + Length + 长度 + + + Angle + + + + + VToolLinePoint + + Length + 长度 + + + Angle + + + VToolOptionsPropertyBrowser @@ -8782,6 +8953,17 @@ Do you want to save your changes? + + VToolPointOfContact + + Length + 长度 + + + Angle + + + VToolSeamAllowance @@ -8837,6 +9019,17 @@ Do you want to save your changes? 删除 + + VToolShoulderPoint + + Length + 长度 + + + Angle + + + VToolUnionDetails