Fixed issue #38.

--HG--
branch : develop

src/geometry/vdetail.cpp

@@ -67,6 +67,11 @@ void VDetail::Clear()
     width = 10;
 }
 
+void VDetail::ClearNodes()
+{
+    nodes.clear();
+}
+
 bool VDetail::Containes(const qint64 &id) const
 {
     for (ptrdiff_t i = 0; i < nodes.size(); ++i)
@@ -92,16 +97,9 @@ const VNodeDetail &VDetail::at(ptrdiff_t indx) const
 
 ptrdiff_t VDetail::indexOfNode(const qint64 &id) const
 {
-    for (ptrdiff_t i = 0; i < nodes.size(); ++i)
-    {
-        VNodeDetail node = nodes[i];
-        if (node.getId() == id)
-        {
-            return i;
-        }
-    }
-    return -1;
+    return indexOfNode(nodes, id);
 }
+
 qint64 VDetail::id() const
 {
     return _id;
@@ -114,17 +112,23 @@ void VDetail::setId(const qint64 &id)
 
 bool VDetail::OnEdge(const qint64 &p1, const qint64 &p2) const
 {
-    ptrdiff_t i = indexOfNode(p1);
+    QVector<VNodeDetail> list = listNodePoint();
+    if(list.size() < 3)
+    {
+        qWarning()<<"Not enough points.";
+        return false;
+    }
+    ptrdiff_t i = indexOfNode(list, p1);
     ptrdiff_t j1 = 0, j2 = 0;
 
-    if (i == nodes.size() - 1)
+    if (i == list.size() - 1)
     {
         j1 = i-1;
         j2 = 0;
     }
     else if (i == 0)
     {
-        j1 = nodes.size() - 1;
+        j1 = list.size() - 1;
         j2 = i + 1;
     }
     else
@@ -133,7 +137,7 @@ bool VDetail::OnEdge(const qint64 &p1, const qint64 &p2) const
         j2 = i + 1;
     }
 
-    if (nodes.at(j1).getId() == p2 || nodes.at(j2).getId() == p2)
+    if (list.at(j1).getId() == p2 || list.at(j2).getId() == p2)
     {
         return true;
     }
@@ -151,14 +155,15 @@ ptrdiff_t VDetail::Edge(const qint64 &p1, const qint64 &p2) const
         return -1;
     }
 
-    ptrdiff_t i = indexOfNode(p1);
-    ptrdiff_t j = indexOfNode(p2);
+    QVector<VNodeDetail> list = listNodePoint();
+    ptrdiff_t i = indexOfNode(list, p1);
+    ptrdiff_t j = indexOfNode(list, p2);
 
     ptrdiff_t min = qMin(i, j);
 
-    if (min == 0 && (i == nodes.size() - 1 || j == nodes.size() - 1))
+    if (min == 0 && (i == list.size() - 1 || j == list.size() - 1))
     {
-        return nodes.size() - 1;
+        return list.size() - 1;
     }
     else
     {
@@ -168,18 +173,87 @@ ptrdiff_t VDetail::Edge(const qint64 &p1, const qint64 &p2) const
 
 void VDetail::NodeOnEdge(const ptrdiff_t &index, VNodeDetail &p1, VNodeDetail &p2) const
 {
-    if (index <= 0 || index > nodes.size())
+    QVector<VNodeDetail> list = listNodePoint();
+    if (index < 0 || index > list.size())
     {
-        qWarning()<<"Wrong edge index";
+        qWarning()<<"Wrong edge index index ="<<index;
         return;
     }
-    p1 = nodes.at(index);
-    if (index + 1 > nodes.size() - 1)
+    p1 = list.at(index);
+    if (index + 1 > list.size() - 1)
     {
-        p2 = nodes.at(0);
+        p2 = list.at(0);
     }
     else
     {
-        p2 = nodes.at(index+1);
+        p2 = list.at(index+1);
     }
 }
+
+VDetail VDetail::RemoveEdge(const ptrdiff_t &index) const
+{
+    VDetail det(*this);
+    det.ClearNodes();
+
+    QVector<VNodeDetail> list = this->listNodePoint();
+    qint32 edge = list.size();
+    ptrdiff_t k = 0;
+    for(ptrdiff_t i=0; i<edge; ++i)
+    {
+        if(i == index)
+        {
+            det.append(this->at(k));
+            ++k;
+        }
+        else
+        {
+            VNodeDetail p1;
+            VNodeDetail p2;
+            this->NodeOnEdge(i, p1, p2);
+            ptrdiff_t j1 = this->indexOfNode(p1.getId());
+            ptrdiff_t j2 = this->indexOfNode(p2.getId());
+            if(j2 == 0)
+            {
+                j2 = this->CountNode()-1;
+                if(j1 == j2)
+                {
+                    det.append(this->at(j1));
+                    ++k;
+                    continue;
+                }
+            }
+            for(ptrdiff_t j=j1; j<j2; ++j)
+            {
+                det.append(this->at(j));
+                ++k;
+            }
+        }
+    }
+    return det;
+}
+
+QVector<VNodeDetail> VDetail::listNodePoint() const
+{
+    QVector<VNodeDetail> list;
+    for (ptrdiff_t i = 0; i < nodes.size(); ++i)
+    {
+        if (nodes[i].getTypeTool() == Tool::NodePoint)
+        {
+            list.append(nodes[i]);
+        }
+    }
+    return list;
+}
+
+ptrdiff_t VDetail::indexOfNode(const QVector<VNodeDetail> &list, const qint64 &id) const
+{
+    for (ptrdiff_t i = 0; i < list.size(); ++i)
+    {
+        if (list[i].getId() == id)
+        {
+            return i;
+        }
+    }
+    qWarning()<<"Can't find node.";
+    return -1;
+}

src/geometry/vdetail.h

@@ -87,6 +87,7 @@ public:
      * @brief Clear
      */
     void           Clear();
+    void           ClearNodes();
     /**
      * @brief CountNode
      * @return
@@ -181,6 +182,7 @@ public:
     bool           OnEdge(const qint64 &p1, const qint64 &p2)const;
     ptrdiff_t      Edge(const qint64 &p1, const qint64 &p2)const;
     void           NodeOnEdge(const ptrdiff_t &index, VNodeDetail &p1, VNodeDetail &p2)const;
+    VDetail        RemoveEdge(const ptrdiff_t &index) const;
 private:
     qint64         _id;
     /**
@@ -211,6 +213,8 @@ private:
      * @brief width
      */
     qreal          width;
+    QVector<VNodeDetail> listNodePoint()const;
+    ptrdiff_t      indexOfNode(const QVector<VNodeDetail> &list, const qint64 &id) const;
 };
 
 #endif // VDETAIL_H

src/mainwindow.cpp

@@ -477,6 +477,7 @@ void MainWindow::ClosedDialogDetail(int result)
         VToolDetail::Create(dialogDetail, sceneDetails, doc, pattern);
     }
     ArrowTool();
+    doc->FullUpdateTree();
 }
 
 void MainWindow::ToolHeight(bool checked)
@@ -875,7 +876,7 @@ void MainWindow::ActionDraw(bool checked)
         verScrollBar = view->verticalScrollBar();
         verScrollBar->setValue(currentScene->getVerScrollBar());
 
-        comboBoxDraws->setCurrentIndex(currentDrawIndex);
+        comboBoxDraws->setCurrentIndex(currentDrawIndex);//restore current pattern peace
 
         mode = Draw::Calculation;
         SetEnableTool(true);
@@ -907,7 +908,7 @@ void MainWindow::ActionDetails(bool checked)
         verScrollBar = view->verticalScrollBar();
         verScrollBar->setValue(currentScene->getVerScrollBar());
 
-        currentDrawIndex = comboBoxDraws->currentIndex();
+        currentDrawIndex = comboBoxDraws->currentIndex();//save current pattern peace
         comboBoxDraws->setCurrentIndex(comboBoxDraws->count()-1);
 
         mode = Draw::Modeling;

src/tools/vtooluniondetails.cpp

@@ -112,12 +112,12 @@ void VToolUnionDetails::AddToNewDetail(QObject *tool, VDomDocument *doc, VContai
                                  QString().setNum(l2.angle()));
                 Q_ASSERT(arc1 != 0);
                 arc1->setMode(Draw::Modeling);
-                idObject = data->AddGObject(arc1);
+                id = data->AddGObject(arc1);
 
                 VArc *arc2 = new VArc(*arc1);
                 Q_ASSERT(arc2 != 0);
                 arc2->setMode(Draw::Modeling);
-                id = data->AddGObject(arc2);
+                idObject = data->AddGObject(arc2);
 
                 VNodeArc::Create(doc, data, id, idObject, Document::FullParse, Tool::FromGui, idTool, tool);
             }
@@ -152,12 +152,12 @@ void VToolUnionDetails::AddToNewDetail(QObject *tool, VDomDocument *doc, VContai
                 VSpline *spl = new VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline->GetKcurve());
                 Q_ASSERT(spl != 0);
                 spl->setMode(Draw::Modeling);
-                id = data->AddGObject(spl);
+                idObject = data->AddGObject(spl);
 
                 VSpline *spl1 = new VSpline(*spl);
                 Q_ASSERT(spl1 != 0);
                 spl1->setMode(Draw::Modeling);
-                idObject = data->AddGObject(spl1);
+                id = data->AddGObject(spl1);
                 VNodeSpline::Create(doc, data, id, idObject, Document::FullParse, Tool::FromGui, idTool, tool);
             }
         }
@@ -263,7 +263,8 @@ void VToolUnionDetails::UpdatePoints(const qint64 &idDetail, VContainer *data, c
 
                 QLineF l1(center->toQPointF(), p1.toQPointF());
                 QLineF l2(center->toQPointF(), p2.toQPointF());
-                qint64 idCenter = data->AddGObject(center);
+                ++idCount;
+                data->UpdateGObject(idDetail+idCount, center);
                 VArc *arc1 = new VArc(*center, arc->GetRadius(), arc->GetFormulaRadius(), l1.angle(),
                                      QString().setNum(l1.angle()), l2.angle(), QString().setNum(l2.angle()));
                 Q_ASSERT(arc1);
@@ -284,7 +285,8 @@ void VToolUnionDetails::UpdatePoints(const qint64 &idDetail, VContainer *data, c
                 VPointF *p1 = new VPointF(spline->GetP1());
                 Q_ASSERT(p1 != 0);
                 BiasRotatePoint(p1, dx, dy, data->GeometricObject<const VPointF *>(pRotate)->toQPointF(), angle);
-                qint64 idP1 = data->AddGObject(p1);
+                ++idCount;
+                data->UpdateGObject(idDetail+idCount, p1);
 
                 VPointF p2 = VPointF(spline->GetP2());
                 BiasRotatePoint(&p2, dx, dy, data->GeometricObject<const VPointF *>(pRotate)->toQPointF(), angle);
@@ -295,7 +297,8 @@ void VToolUnionDetails::UpdatePoints(const qint64 &idDetail, VContainer *data, c
                 VPointF *p4 = new VPointF(spline->GetP4());
                 Q_ASSERT(p4 != 0);
                 BiasRotatePoint(p4, dx, dy, data->GeometricObject<const VPointF *>(pRotate)->toQPointF(), angle);
-                qint64 idP4 = data->AddGObject(p4);
+                ++idCount;
+                data->UpdateGObject(idDetail+idCount, p4);
 
                 VSpline *spl = new VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline->GetKcurve());
                 Q_ASSERT(spl != 0);
@@ -325,7 +328,8 @@ void VToolUnionDetails::UpdatePoints(const qint64 &idDetail, VContainer *data, c
                     Q_ASSERT(p1 != 0);
                     BiasRotatePoint(p1, dx, dy, data->GeometricObject<const VPointF *>(pRotate)->toQPointF(),
                                     angle);
-                    qint64 idP1 = data->AddGObject(p1);
+                    ++idCount;
+                    data->UpdateGObject(idDetail+idCount, p1);
 
                     VPointF p2 = VPointF(spline.GetP2());
                     BiasRotatePoint(&p2, dx, dy, data->GeometricObject<const VPointF *>(pRotate)->toQPointF(),
@@ -339,7 +343,8 @@ void VToolUnionDetails::UpdatePoints(const qint64 &idDetail, VContainer *data, c
                     Q_ASSERT(p4 != 0);
                     BiasRotatePoint(p4, dx, dy, data->GeometricObject<const VPointF *>(pRotate)->toQPointF(),
                                     angle);
-                    qint64 idP4 = data->AddGObject(p4);
+                    ++idCount;
+                    data->UpdateGObject(idDetail+idCount, p4);
 
                     VSpline spl = VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline.GetKcurve());
                     if (i==1)
@@ -423,43 +428,47 @@ void VToolUnionDetails::Create(const qint64 _id, const VDetail &d1, const VDetai
 
     if (typeCreation == Tool::FromGui)
     {
+        VDetail uD1 = d1.RemoveEdge(indexD1);
+        VDetail uD2 = d2.RemoveEdge(indexD2);
         qint32 j = 0, i = 0;
-        qint32 nD1 = d1.CountNode();
-        qint32 nD2 = d2.CountNode();
+        qint32 nD1 = uD1.CountNode();
+        qint32 nD2 = uD2.CountNode();
         qint32 pointsD2 = 0; //Keeps count points second detail, what we already add.
         VDetail newDetail;
 
+        VNodeDetail det1p1;
+        VNodeDetail det1p2;
+        d1.NodeOnEdge(indexD1, det1p1, det1p2);
+        const VPointF *point1 = data->GeometricObject<const VPointF *>(det1p1.getId());
+        const VPointF *point2 = data->GeometricObject<const VPointF *>(det1p2.getId());
+
+        VNodeDetail det2p1;
+        VNodeDetail det2p2;
+        d2.NodeOnEdge(indexD2, det2p1, det2p2);
+        VPointF point3 = VPointF(*data->GeometricObject<const VPointF *>(det2p1.getId()));
+        VPointF point4 = VPointF(*data->GeometricObject<const VPointF *>(det2p2.getId()));
+
+        qreal dx = point1->x() - point4.x();
+        qreal dy = point1->y() - point4.y();
+
+        point3.setX(point3.x()+dx);
+        point3.setY(point3.y()+dy);
+
+        point4.setX(point4.x()+dx);
+        point4.setY(point4.y()+dy);
+
+        QLineF l1(point1->toQPointF(), point2->toQPointF());
+        QLineF l2(point4.toQPointF(), point3.toQPointF());
+        qreal angle = l2.angleTo(l1);
+
+        ptrdiff_t iD1 = d1.indexOfNode(det1p1.getId());
+
         do
         {
-            AddToNewDetail(unionDetails, doc, data, newDetail, d1, i, id);
+            AddToNewDetail(unionDetails, doc, data, newDetail, uD1, i, id);
             ++i;
-            if (i > indexD1 && pointsD2 < nD2-2)
+            if (i > iD1 && pointsD2 < nD2-2)
             {
-                VNodeDetail det1p1;
-                VNodeDetail det1p2;
-                d1.NodeOnEdge(indexD1, det1p1, det1p2);
-                const VPointF *point1 = data->GeometricObject<const VPointF *>(det1p1.getId());
-                const VPointF *point2 = data->GeometricObject<const VPointF *>(det1p2.getId());
-
-                VNodeDetail det2p1;
-                VNodeDetail det2p2;
-                d2.NodeOnEdge(indexD2, det2p1, det2p2);
-                VPointF point3 = VPointF(*data->GeometricObject<const VPointF *>(det2p1.getId()));
-                VPointF point4 = VPointF(*data->GeometricObject<const VPointF *>(det2p2.getId()));
-
-                qreal dx = point1->x() - point4.x();
-                qreal dy = point1->y() - point4.y();
-
-                point3.setX(point3.x()+dx);
-                point3.setY(point3.y()+dy);
-
-                point4.setX(point4.x()+dx);
-                point4.setY(point4.y()+dy);
-
-                QLineF l1(point1->toQPointF(), point2->toQPointF());
-                QLineF l2(point4.toQPointF(), point3.toQPointF());
-                qreal angle = l2.angleTo(l1);
-
                 do
                 {
                     if (pointsD2 == 0)
@@ -467,14 +476,14 @@ void VToolUnionDetails::Create(const qint64 _id, const VDetail &d1, const VDetai
                         VNodeDetail node1;
                         VNodeDetail node2;
                         d2.NodeOnEdge(indexD2, node1, node2);
-                        ptrdiff_t k = d2.indexOfNode(node2.getId());
-                        if (k == d2.CountNode()-1)
+                        ptrdiff_t k = uD2.indexOfNode(node2.getId());
+                        if (k == uD2.CountNode()-1)
                         {
                             j = 0;
                         }
                         else
                         {
-                            j = d2.indexOfNode(node2.getId())+1;
+                            j = uD2.indexOfNode(node2.getId())+1;
                         }
                     }
                     if (pointsD2 == nD2 -2)
@@ -485,7 +494,7 @@ void VToolUnionDetails::Create(const qint64 _id, const VDetail &d1, const VDetai
                     {
                         j=0;
                     }
-                    AddToNewDetail(unionDetails, doc, data, newDetail, d2, j, id, dx, dy, det1p1.getId(), angle);
+                    AddToNewDetail(unionDetails, doc, data, newDetail, uD2, j, id, dx, dy, det1p1.getId(), angle);
                     ++pointsD2;
                     ++j;
                 } while (pointsD2 < nD2);
@@ -504,43 +513,47 @@ void VToolUnionDetails::Create(const qint64 _id, const VDetail &d1, const VDetai
     }
     else
     {
+        VDetail uD1 = d1.RemoveEdge(indexD1);
+        VDetail uD2 = d2.RemoveEdge(indexD2);
         qint64 idCount = 0;
         qint32 j = 0, i = 0;
-        qint32 nD1 = d1.CountNode();
-        qint32 nD2 = d2.CountNode();
+        qint32 nD1 = uD1.CountNode();
+        qint32 nD2 = uD2.CountNode();
         qint32 pointsD2 = 0; //Keeps count points second detail, what we already add.
 
+        VNodeDetail det1p1;
+        VNodeDetail det1p2;
+        d1.NodeOnEdge(indexD1, det1p1, det1p2);
+        const VPointF *point1 = data->GeometricObject<const VPointF *>(det1p1.getId());
+        const VPointF *point2 = data->GeometricObject<const VPointF *>(det1p2.getId());
+
+        VNodeDetail det2p1;
+        VNodeDetail det2p2;
+        d2.NodeOnEdge(indexD2, det2p1, det2p2);
+        VPointF point3 = VPointF(*data->GeometricObject<const VPointF *>(det2p1.getId()));
+        VPointF point4 = VPointF(*data->GeometricObject<const VPointF *>(det2p2.getId()));
+
+        qreal dx = point1->x() - point4.x();
+        qreal dy = point1->y() - point4.y();
+
+        point3.setX(point3.x()+dx);
+        point3.setY(point3.y()+dy);
+
+        point4.setX(point4.x()+dx);
+        point4.setY(point4.y()+dy);
+
+        QLineF l1(point1->toQPointF(), point2->toQPointF());
+        QLineF l2(point4.toQPointF(), point3.toQPointF());
+        qreal angle = l2.angleTo(l1);
+
+        ptrdiff_t iD1 = d1.indexOfNode(det1p1.getId());
+
         do
         {
-            UpdatePoints(id, data, d1, i, idCount);
+            UpdatePoints(id, data, uD1, i, idCount);
             ++i;
-            if (i > indexD1 && pointsD2 < nD2-2)
+            if (i > iD1 && pointsD2 < nD2-2)
             {
-                VNodeDetail det1p1;
-                VNodeDetail det1p2;
-                d1.NodeOnEdge(indexD1, det1p1, det1p2);
-                const VPointF *point1 = data->GeometricObject<const VPointF *>(det1p1.getId());
-                const VPointF *point2 = data->GeometricObject<const VPointF *>(det1p2.getId());
-
-                VNodeDetail det2p1;
-                VNodeDetail det2p2;
-                d2.NodeOnEdge(indexD2, det2p1, det2p2);
-                VPointF point3 = VPointF(*data->GeometricObject<const VPointF *>(det2p1.getId()));
-                VPointF point4 = VPointF(*data->GeometricObject<const VPointF *>(det2p2.getId()));
-
-                qreal dx = point1->x() - point4.x();
-                qreal dy = point1->y() - point4.y();
-
-                point3.setX(point3.x()+dx);
-                point3.setY(point3.y()+dy);
-
-                point4.setX(point4.x()+dx);
-                point4.setY(point4.y()+dy);
-
-                QLineF l1(point1->toQPointF(), point2->toQPointF());
-                QLineF l2(point4.toQPointF(), point3.toQPointF());
-                qreal angle = l2.angleTo(l1);
-
                 do
                 {
                     if (pointsD2 == 0)
@@ -548,14 +561,14 @@ void VToolUnionDetails::Create(const qint64 _id, const VDetail &d1, const VDetai
                         VNodeDetail node1;
                         VNodeDetail node2;
                         d2.NodeOnEdge(indexD2, node1, node2);
-                        ptrdiff_t k = d2.indexOfNode(node2.getId());
-                        if (k == d2.CountNode()-1)
+                        ptrdiff_t k = uD2.indexOfNode(node2.getId());
+                        if (k == uD2.CountNode()-1)
                         {
                             j = 0;
                         }
                         else
                         {
-                            j = d2.indexOfNode(node2.getId())+1;
+                            j = uD2.indexOfNode(node2.getId())+1;
                         }
                     }
                     if (pointsD2 == nD2-2)
@@ -566,7 +579,7 @@ void VToolUnionDetails::Create(const qint64 _id, const VDetail &d1, const VDetai
                     {
                         j=0;
                     }
-                    UpdatePoints(id, data, d2, j, idCount, dx, dy, det1p1.getId(), angle);
+                    UpdatePoints(id, data, uD2, j, idCount, dx, dy, det1p1.getId(), angle);
                     ++pointsD2;
                     ++j;
                 } while (pointsD2 < nD2);