1 GND TX RX GND GND PD7 PD6 PD5 VCC VCC PC5 PC4 PB2 Pentabug V2.1 https://github.com/c3d2/pentabug RESISTANCE BELOW bigalex@c3d2.de IR +5V BAT SCL SDA for pentabug 2.0 pentatonic 3 2 1 4 5 for pentabug 2.0 ledmatrix Dual In Line 0.3 inch >NAME >VALUE LED 5 mm, round >NAME >VALUE OMRON SWITCH >NAME LED 3 mm, round >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.4 x 4.4 mm >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE BUZZER >NAME >VALUE Farnell Battery Holder 2x AAA Farnell # 1650679 >NAME 2xAAA >VALUE Female Headers etc. Naming: FE = female # contacts - # rows W = angled <author>Created by librarian@cadsoft.de</author> FEMALE HEADER >NAME 1 5 >VALUE LEDs <author>Created by librarian@cadsoft.de</author> Extended by Federico Battaglin <author><federico.rd@fdpinternational.com></author> with DUOLED LED 5 mm, round >NAME >VALUE Omron Switches <author>Created by librarian@cadsoft.de</author> OMRON SWITCH >NAME >VALUE 1 2 3 4 RESISTOR type 0207, grid 10 mm >NAME >VALUE TO 92 pad in line >NAME >VALUE Pin Headers Naming: MA = male # contacts - # rows W = angled <author>Created by librarian@cadsoft.de</author> PIN HEADER 1 >NAME >VALUE 10 EAGLE Design Rules Die Standard-Design-Rules sind so gewählt, dass sie für die meisten Anwendungen passen. Sollte ihre Platine besondere Anforderungen haben, treffen Sie die erforderlichen Einstellungen hier und speichern die Design Rules unter einem neuen Namen ab. EAGLE Design Rules The default Design Rules have been set to cover a wide range of applications. Your particular design may have different requirements, so please make the necessary adjustments and save your customized design rules under a new name.